# #22227 $baserev
# #22302 $yacc $byacc
+# H.Merijn Brand [30 Oct 2004]
+# Mentioned for the same reason for future reference
+# #23434 $d_strlcat $d_strlcpy
+
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
netbsd*|freebsd[234]*|openbsd*)
linklibperl="-L. -lperl"
;;
+ interix*)
+ linklibperl="-L. -lperl"
+ shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
+ ;;
aix*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
OBJ_EXT = $_o
PATH_SEP = $p_
+# If you're going to use valgrind and it can't be invoked as plain valgrind
+# then you'll need to change this, or override it on the make command line.
+VALGRIND=valgrind
+
FIRSTMAKEFILE = $firstmakefile
# Any special object files needed by this architecture, e.g. os2/os2.obj
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
-private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm
+CONFIGPM = lib/Config.pm lib/Config_heavy.pl
+private = preplibrary $(CONFIGPM) lib/Config.pod lib/ExtUtils/Miniperl.pm
# Files to be built with variable substitution before miniperl
# is available.
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
+c4 = globals.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c opmini.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-lintflags = -hbvxac
+lintflags = \
+ -bhn \
+ -p \
+ -s \
+ -Ncheck=%all \
+ -Nlevel=4 \
+ -errfmt=src \
+ -errtags \
+ -erroff=E_BAD_PTR_CAST \
+ -erroff=E_BLOCK_DECL_UNUSED \
+ -erroff=E_CONSTANT_CONDITION \
+ -erroff=E_BAD_PTR_CAST_ALIGN \
+ -erroff=E_PTRDIFF_OVERFLOW \
+ -erroff=E_EXPR_NULL_EFFECT \
+ -erroff=E_BAD_PTR_INT_COMBINATION \
+ -erroff=E_LOOP_EMPTY \
+ -erroff=E_TRUE_LOGICAL_EXPR \
+ -erroff=E_FALSE_LOGICAL_EXPR \
+ -erroff=E_INDISTING_FROM_TRUNC \
+ -erroff=E_POINTER_TO_OBJECT \
+ -erroff=E_ASSIGN_NARROW_CONV \
+ -erroff=E_BAD_SIGN_EXTEND \
+ -erroff=E_INCL_NUSD \
+ -erroff=E_MAIN_PARAM \
+ -Wfoo.flow
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
cd x2p; $(MAKE) compile;
cd pod; $(MAKE) compile;
-translators: miniperl$(EXE_EXT) lib/Config.pm FORCE
+translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE
+utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
# levels of symbolic links, even if we have only two)
opmini.c: op.c
- \$(CPS) op.c opmini.tmp
- sh mv-if-diff opmini.tmp opmini.c
+ \$(RMS) opmini.c
+ \$(CPS) op.c opmini.c
opmini\$(OBJ_EXT): opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
- sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
- sh mv-if-diff writemain.tmp perlmain.c
+ sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
!NO!SUBS!
case "$osname" in
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp.tmp
- sh mv-if-diff perl.exp.tmp perl.exp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
!NO!SUBS!
;;
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp.tmp
- sh mv-if-diff perl.exp.tmp perl5.def
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp
!NO!SUBS!
;;
!NO!SUBS!
case "${osname}${osvers}" in
- aix*)
+ aix*|beos*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl $(CLDFLAGS) \
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
- beos*|next4*)
+ next4*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
- valgrind ./perl -e 1 2>/dev/null || exit 1
+ $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
# Third Degree Perl (Tru64 only)
perl.config.dashg:
@echo "Checking optimize='-g' in config.sh..."
@grep "^optimize=" config.sh
- @grep "^optimize='-g'" config.sh >/dev/null || exit 1
+ @egrep "^optimize='(-g|.*-g[1-3].*)'" config.sh >/dev/null || exit 1
perl.third.config: config.sh
@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
# We need to autosplit in two steps because VOS can't handle so many args
#
.PHONY: preplibrary
-preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
+preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
-# Take care to avoid modifying lib/Config.pm without reason
-# (If trying to create a new port and having problems with the configpm script,
-# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
- $(LDLIBPTH) ./miniperl -Ilib configpm configpm.tmp
- sh mv-if-diff configpm.tmp $@
+lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+ $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
+
+$(CONFIGPM): lib/Config.pod
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
- $(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
- sh mv-if-diff minimod.tmp $@
- -touch lib/ExtUtils/Miniperl.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
+ $(LDLIBPTH) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
- cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
+ cp ext/re/re.pm lib/re.pm
-$(plextract): miniperl$(EXE_EXT) lib/Config.pm x2p/s2p
+$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
@-rm -f $@
- $(LDLIBPTH) ./miniperl -Ilib $@.PL
+ $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL
-x2p/s2p: miniperl$(EXE_EXT) lib/Config.pm x2p/s2p.PL
+x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
cd x2p; $(LDLIBPTH) $(MAKE) s2p
-lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm
+lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM)
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
-$(unidatafiles): miniperl$(EXE_EXT) lib/Config.pm lib/unicore/mktables
+unidatafiles $(unidatafiles): uni.data
+
+uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w
+ touch uni.data
extra.pods: miniperl$(EXE_EXT)
- -@test -f extra.pods && rm -f `cat extra.pods`
+ -@test ! -f extra.pods || rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-@rm -f pod/perldelta.pod
- -@test -f pod/perl592delta.pod && cd pod && $(LNS) perl592delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+ -@test -f pod/perl593delta.pod && cd pod && $(LNS) perl593delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+
extras.make: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
# Eventually Configure could ask for some of these values.
install.html: all installhtml
-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
- $(LDLIBPTH) ./perl installhtml \
+ $(LDLIBPTH) ./perl installhtml \
--podroot=. --podpath=. --recurse \
- --htmldir=$(privlib)/html \
- --htmlroot=$(privlib)/html \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
--splithead=pod/perlipc \
--splititem=pod/perlfunc \
--libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs extra.pods opmini.o
+ -rm -f perl.exp ext.libs extra.pods uni.data opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
# Some systems do not support "?", so keep these files separate.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
- rm -f core *perl.core t/core t/*perl.core
+ rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
- rm -f $(private) lib/Config.pod
+ rm -f $(private)
rm -rf $(unidatafiles) $(unidatadirs)
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -rf .config
rm -f preload
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Digest
rm -rf lib/Encode
- -rmdir lib/Filter/Util lib/IO/Socket lib/IO
+ rm -f lib/ExtUtils/ParseXS/t/XSTest.c
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
+ -rmdir lib/B lib/Data
+ -rmdir lib/Compress/Zlib lib/Compress/Gzip lib/Compress
+ -rmdir lib/Filter/Util lib/IO/Socket lib/IO/Compress lib/IO/Uncompress
-rmdir lib/List lib/MIME lib/Scalar lib/Sys
-rmdir lib/threads lib/XS
@$(LDLIBPTH) $(MAKE) _cleaner2
-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
-# The following lint has practically everything turned on. Unfortunately,
-# you have to wade through a lot of mumbo jumbo that can't be suppressed.
-# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
-# for that spot.
-
.PHONY: lint
lint: $(c)
- lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+ rm -f *.ln
+ lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
PERL=./perl $(MAKE) _test_prep
test.valgrind check.valgrind: test_prep perl.valgrind.config
- PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 $(MAKE) _test
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind
PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
TAGS: emacs/cperl-mode.elc
sh emacs/ptags
-ctags: tags
-
# Let's hope make will not go into an infinite loop on case-unsensitive systems
# This may also fail if . is in the head of the path, since perl will
# require -Ilib
tags: TAGS
perl emacs/e2ctags.pl TAGS > tags
+ctags:
+ ctags -f Tags -N --totals --languages=c --langmap=c:+.h *.c *.h
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
;;
esac
+# ex: set ts=8 sts=4 sw=4 noet:
https://perl5.git.perl.org / perl5.git / blobdiff