* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
-#define BIN "c:\\perl\\5.00552\\bin\\MSWin32-x86" /**/
-#define BIN_EXP "c:\\perl\\5.00552\\bin\\MSWin32-x86" /**/
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "cl -nologo -E"
-#define CPPMINUS ""
+#define BIN "c:\\perl\\5.00557\\bin\\MSWin32-x86" /**/
+#define BIN_EXP "c:\\perl\\5.00557\\bin\\MSWin32-x86" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
*/
/*#define HAS_GETGROUPS /**/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/*#define HAS_UNAME /**/
-
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
#define HAS_MKTIME /**/
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
+ */
+/*#define HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+/*#define HAS_MUNMAP /**/
+
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
/* HAS_SHMAT_PROTOTYPE:
* This symbol, if defined, indicates that the sys/shm.h includes
* a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
+ * guess one. Shmat_t shmat (int, Shmat_t, int) is a good guess,
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
*/
#define HAS_UMASK /**/
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK /**/
-
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
/* I_SYS_ACCESS:
* This symbol, if defined, indicates to the C program that it should
- * include <sysaccess.h>.
+ * include <sys/access.h>.
*/
/*#define I_SYS_ACCESS /**/
*/
/*#define I_SYS_SECURITY /**/
+/* CROSSCOMPILE:
+ * This symbol, if defined, signifies that we our
+ * build process is a cross-compilation.
+ */
+/*#define CROSSCOMPILE /**/
+
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+/*#define MULTIARCH /**/
+
/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8.
- * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
- * Binaries (MAB) for targets with varying alignment. This only matters
- * for perl, where the config.h can be generated and installed on one
- * system, and used by a different architecture to build an extension.
- * The default is eight, for safety.
+ * This symbol contains the number of bytes required to align a
+ * double. Usual values are 2, 4 and 8. The default is eight,
+ * for safety.
*/
-#define MEM_ALIGNBYTES 8 /**/
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES 8
+#endif
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#ifndef NeXT
+#if defined(CROSSCOMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
#define BYTEORDER 0x1234 /* large digits for MSB */
-#else /* NeXT */
-#ifdef __LITTLE_ENDIAN__
-#define BYTEORDER 0x1234
-#else /* __BIG_ENDIAN__ */
-#define BYTEORDER 0x4321
-#endif /* ENDIAN CHECK */
#endif /* NeXT */
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-#define CASTI32 /**/
+/*#define CASTI32 /**/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
*/
/*#define VOID_CLOSEDIR /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#define HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
/*#define HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
/*#define I_SYS_TIME /**/
/*#define I_SYS_TIME_KERNEL /**/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
-
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* non-blocking I/O for the file descriptor. Note that there is no way
*/
#define PTRSIZE 4 /**/
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
/* RANDBITS:
- * This symbol contains the number of bits of random number the rand()
- * function produces. Usual values are 15, 16, and 31.
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#define RANDBITS 15 /**/
+#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
+#define Rand_seed_t unsigned /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 15 /**/
/* SSize_t:
* This symbol holds the type used by functions that return
#include "Bletch: How does this C preprocessor catenate tokens?"
#endif
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+#define CPPSTDIN "cl -nologo -E"
+#define CPPMINUS ""
+#define CPPRUN "cl -nologo -E"
+
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
*/
#define HAS_ACCESS /**/
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
*/
/*#define HAS_GETHOSTENT /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+#undef HAS_PHOSTNAME
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
+
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
#define LONGLONGSIZE 8 /**/
#endif
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+/*#define HAS_MEMCHR /**/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'cadd_t'.
+ */
+/*#define HAS_MMAP /**/
+#define Mmap_t void * /**/
+
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-#define HAS_SOCKET /**/
-/*#define HAS_SOCKETPAIR /**/
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * (BSD 4.3 or 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * (BSD 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+#define HAS_SOCKET /**/
+/*#define HAS_SOCKETPAIR /**/
+/*#define HAS_MSG_CTRUNC /**/
+/*#define HAS_MSG_DONTROUTE /**/
+/*#define HAS_MSG_OOB /**/
+/*#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY /**/
+/*#define HAS_SCM_RIGHTS /**/
+/*#define HAS_SENDMSG /**/
+/*#define HAS_RECVMSG /**/
+/*#define HAS_STRUCT_MSGHDR /**/
+/*#define HAS_STRUCT_CMSGHDR /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
-/*#define USE_STAT_BLOCKS /* backward compatibility */
+/*#define USE_STAT_BLOCKS /**/
/* HAS_STRERROR:
* This symbol, if defined, indicates that the strerror routine is
/*#define USE_SEMCTL_SEMUN /**/
/*#define USE_SEMCTL_SEMID_DS /**/
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK /**/
+
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* appropriate return type of a signal handler. Thus, you can declare
/*#define PWGECOS /**/
/*#define PWPASSWD /**/
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUIO /**/
+
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
* the sig_name list.
*/
#define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
-#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
+#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define ARCHLIB "c:\\perl\\5.00552\\lib\\MSWin32-x86" /**/
+#define ARCHLIB "c:\\perl\\5.00557\\lib\\MSWin32-x86" /**/
/*#define ARCHLIB_EXP "" /**/
/* DLSYM_NEEDS_UNDERSCORE:
*/
/*#define HAS_FTELLO /**/
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems.
+ */
+/*#define HAS_GETMNTENT /**/
+
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+/*#define HAS_MADVISE /**/
+
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
+ */
+/*#define HAS_MPROTECT /**/
+
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+/*#define HAS_READV /**/
+
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
/*#define USE_SFIO /**/
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+/* HAS_STRUCT_STATFS_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem holding the file.
+ * This kind of struct statfs is coming from sys/mount.h (BSD),
+ * not from sys/statfs.h (SYSV).
+ */
+/*#define HAS_FSTATFS /**/
+/*#define HAS_STRUCT_STATFS_FLAGS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems of file descriptors.
+ */
+/*#define HAS_FSTATVFS /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir (DIR*);
+ */
+#define HAS_TELLDIR_PROTO /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+/*#define HAS_WRITEV /**/
+
/* HAS_DBMINIT64:
* This symbol, if defined, indicates that the dbminit64 routine is
* available to open dbm files larger than 2 gigabytes.
*/
#define USE_DYNAMIC_LOADING /**/
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL /**/
+
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
/*#define I_INTTYPES /**/
/*#define HAS_INT64_T /**/
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+/*#define I_MNTENT /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
+ */
+/*#define I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+/*#define I_POLL /**/
+
+/* I_SYS_MMAN:
+ * This symbol, if defined, indicates that <sys/mman.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_MMAN /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_MOUNT /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+/*#define I_SYS_STATVFS /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL /**/
+
/* HAS_FSTAT64:
* This symbol, if defined, indicates that the fstat64 routine is
* available to stat files (fds) larger than 2 gigabytes.
* available to seekdir files larger than 2 gigabytes.
*/
/* HAS_STAT64:
- * This symbol, if defined, indicates that the fstat64 routine is
+ * This symbol, if defined, indicates that the stat64 routine is
* available to stat files larger than 2 gigabytes.
*/
/* HAS_TELLDIR64:
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "c:\\perl\\5.00552\\lib" /**/
-#define PRIVLIB_EXP (win32_get_privlib("5.00552")) /**/
+#define PRIVLIB "c:\\perl\\5.00557\\lib" /**/
+#define PRIVLIB_EXP (win32_get_privlib(aTHX_ "5.00557")) /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "c:\\perl\\site\\5.00552\\lib\\MSWin32-x86" /**/
+#define SITEARCH "c:\\perl\\site\\5.00557\\lib\\MSWin32-x86" /**/
/*#define SITEARCH_EXP "" /**/
/* SITELIB:
* This symbol contains the ~name expanded version of SITELIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITELIB "c:\\perl\\site\\5.00552\\lib" /**/
-#define SITELIB_EXP (win32_get_sitelib("5.00552")) /**/
+#define SITELIB "c:\\perl\\site\\5.00557\\lib" /**/
+#define SITELIB_EXP (win32_get_sitelib(aTHX_ "5.00557")) /**/
/* STARTPERL:
* This variable contains the string to put in front of a perl
/*#define HAS_FTELLO64 /**/
/*#define HAS_TMPFILE64 /**/
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+/*#define HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY undef
+
/* USE_64_BITS:
- * This symbol, if defined, indicates that 64-bit APIs should
- * be used when available. If not defined, the native default APIs
+ * This symbol, if defined, indicates that 64-bit interfaces should
+ * be used when available. If not defined, the native default interfaces
* will be used (be they 32 or 64 bits).
*/
/*#define USE_64_BITS /**/
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+/*#define MULTIPLICITY /**/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
*/
/*#define USE_PERLIO /**/
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 (void);
+ */
+/*#define HAS_DRAND48_PROTO /**/
+
/* HAS_GETHOST_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* prototypes for gethostent(), gethostbyname(), and
*/
#define ARCHNAME "MSWin32-x86" /**/
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
+
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
*/
/* HAS_SCHED_YIELD:
* This symbol, if defined, indicates that the sched_yield
* routine is available to yield the execution of the current
- * thread.
+ * thread. sched_yield is preferable to pthread_yield.
*/
/*#define HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD /**/
/*#define HAS_SCHED_YIELD /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
*/
-/*#define PTHREADS_CREATED_JOINABLE /**/
+/*#define I_MACH_CTHREADS /**/
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
/* Mode_t:
* This symbol holds the type used to declare file modes
#define Uid_t uid_t /* UID type */
#endif
-#include <win32.h>
https://perl5.git.perl.org / perl5.git / blobdiff