# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl521.dll). Also makes individual DLLs for the XS extensions.
+# (perl523.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.21.7
+#INST_VER *= \5.23.5
#
# Comment this out if you DON'T want your perl installation to have
USE_IMP_SYS *= define
#
-# Comment out next assign to disable perl's I/O subsystem and use compiler's
-# stdio for IO - depending on your compiler vendor and run time library you may
-# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
-# You will also be unable to take full advantage of perl5.8's support for multiple
-# encodings and may see lower IO performance. You have been warned.
-#
-USE_PERLIO *= define
-
-#
# Comment this out if you don't want to enable large file support for
# some reason. Should normally only be changed to maintain compatibility
# with an older release of perl.
#USE_LONG_DOUBLE *=define
#
+# Uncomment this if you want to disable looking up values from
+# HKEY_CURRENT_USER\Software\Perl and HKEY_LOCAL_MACHINE\Software\Perl in
+# the Registry.
+#
+#USE_NO_REGISTRY *=define
+
+#
# uncomment exactly one of the following
#
-# Visual C++ 6.x (aka Visual C++ 98)
+# Visual C++ 6.0 (aka Visual C++ 98)
#CCTYPE *= MSVC60
-# Visual C++ .NET 2002/2003 (aka Visual C++ 7.x) (full version)
+# Visual C++ .NET 2002/2003 (aka Visual C++ 7.0/7.1) (full version)
#CCTYPE *= MSVC70
-# Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
+# Visual C++ Toolkit 2003 (aka Visual C++ 7.1) (free command-line tools)
#CCTYPE *= MSVC70FREE
# Windows Server 2003 SP1 Platform SDK (April 2005)
#CCTYPE = SDK2003SP1
-# Visual C++ 2005 (aka Visual C++ 8.x) (full version)
+# Visual C++ 2005 (aka Visual C++ 8.0) (full version)
#CCTYPE *= MSVC80
-# Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
+# Visual C++ 2005 Express Edition (aka Visual C++ 8.0) (free version)
#CCTYPE *= MSVC80FREE
-# Visual C++ 2008 (aka Visual C++ 9.x) (full version)
+# Visual C++ 2008 (aka Visual C++ 9.0) (full version)
#CCTYPE *= MSVC90
-# Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
+# Visual C++ 2008 Express Edition (aka Visual C++ 9.0) (free version)
#CCTYPE *= MSVC90FREE
-# Visual C++ 2010 (aka Visual C++ 10.x) (full version)
+# Visual C++ 2010 (aka Visual C++ 10.0) (full version)
#CCTYPE = MSVC100
-# Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
+# Visual C++ 2010 Express Edition (aka Visual C++ 10.0) (free version)
#CCTYPE = MSVC100FREE
-# Visual C++ 2012 (aka Visual C++ 11.x) (full version)
+# Visual C++ 2012 (aka Visual C++ 11.0) (full version)
#CCTYPE = MSVC110
-# Visual C++ 2012 Express Edition (aka Visual C++ 11.x) (free version)
+# Visual C++ 2012 Express Edition (aka Visual C++ 11.0) (free version)
#CCTYPE = MSVC110FREE
-# Visual C++ 2013 (aka Visual C++ 12.x) (full version)
+# Visual C++ 2013 (aka Visual C++ 12.0) (full version)
#CCTYPE = MSVC120
-# Visual C++ 2013 Express Edition (aka Visual C++ 12.x) (free version)
+# Visual C++ 2013 Express Edition (aka Visual C++ 12.0) (free version)
#CCTYPE = MSVC120FREE
# MinGW or mingw-w64 with gcc-3.4.5 or later
CCTYPE *= GCC
#__ICC *= define
#
-# uncomment next line if you want debug version of perl (big,slow)
+# Uncomment this if you want to build everything in C++ mode
+#
+#USE_CPLUSPLUS *= define
+
+#
+# uncomment next line if you want debug version of perl (big/slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
+# You can also set CFG = DebugSymbols for a slightly smaller/faster
+# debug build without the special debugging code in perl which is
+# enabled via -DDEBUGGING;
+#
+# or you can set CFG = DebugFull for an even fuller (bigger/slower)
+# debug build using the debug version of the CRT, and enabling VC++
+# debug features such as extra assertions and invalid parameter warnings
+# in perl and CRT code via -D_DEBUG. (Note that the invalid parameter
+# handler does get triggered from time to time in this configuration,
+# which causes warnings to be printed on STDERR, which in turn causes a
+# few tests to fail.) (This configuration is only available for VC++ builds.)
+#
#CFG *= Debug
#
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl521s.lib will also be created.
+# variables below. A static library perl523s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC *= define
USE_MULTI *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
-USE_PERLIO *= undef
USE_LARGE_FILES *= undef
USE_64_BIT_INT *= undef
USE_LONG_DOUBLE *= undef
+USE_NO_REGISTRY *= undef
.IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC = undef
BUILDOPT += -DPERL_IMPLICIT_SYS
.ENDIF
+.IF "$(USE_NO_REGISTRY)" != "undef"
+BUILDOPT += -DWIN32_NO_REGISTRY
+.ENDIF
+
PROCESSOR_ARCHITECTURE *= x86
+.IF "$(WIN64)" == "undef"
+PROCESSOR_ARCHITECTURE = x86
+.ENDIF
+
.IF "$(WIN64)" == ""
# When we are running from a 32bit cmd.exe on AMD64 then
# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
.IF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
.ELSE
-.IF "$(USE_PERLIO)" == "define"
ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
-.ELSE
-ARCHNAME = MSWin32-$(ARCHITECTURE)
-.ENDIF
-.ENDIF
-
-.IF "$(USE_PERLIO)" == "define"
-BUILDOPT += -DUSE_PERLIO
.ENDIF
.IF "$(USE_ITHREADS)" == "define"
.ENDIF
.ENDIF
+.IF "$(USE_LONG_DOUBLE)" == "define"
+ARCHNAME !:= $(ARCHNAME)-ld
+.ENDIF
+
ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
# Options
#
-INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
+INCLUDES = -I.\include -I. -I..
DEFINES = -DWIN32
.IF "$(WIN64)" == "define"
DEFINES += -DWIN64 -DCONSERVATIVE
.ENDIF
LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
CXX_FLAG = -xc++
# Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
#LIBC = -lmsvcrt
# same libs as MSVC
-LIBFILES = $(LIBC) \
- -lmoldname -lkernel32 -luser32 -lgdi32 \
- -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
- -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
+LIBFILES = $(LIBC) -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool \
+ -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 \
+ -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -g
+.ELIF "$(CFG)" == "DebugSymbols"
+OPTIMIZE = -g -O2
+LINK_DBG = -g
.ELSE
OPTIMIZE = -s -O2
LINK_DBG = -s
.ENDIF
EXTRACFLAGS =
+.IF "$(USE_CPLUSPLUS)" == "define"
+EXTRACFLAGS += $(CXX_FLAG)
+.ENDIF
CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -o
LIBOUT_FLAG =
+PDBOUT =
BUILDOPT += -fno-strict-aliasing -mms-bitfields
+MINIBUILDOPT += -fno-strict-aliasing
+
+TESTPREPGCC = test-prep-gcc
.ELSE
-# All but the free version of VC++ 7.x can load DLLs on demand. Makes the test
+# All but the free version of VC++ 7.1 can load DLLs on demand. Makes the test
# suite run in about 10% less time.
.IF "$(CCTYPE)" != "MSVC70FREE"
+# If no registry, advapi32 is only used for Perl_pp_getlogin/getlogin/GetUserNameA
+# which is rare to execute
+.IF "$(USE_NO_REGISTRY)" != "undef"
+DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:advapi32.dll delayimp.lib
+MINIDELAYLOAD =
+.ELSE
DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
+#miniperl never does any registry lookups
+MINIDELAYLOAD = -DELAYLOAD:advapi32.dll
+.ENDIF
.ENDIF
-# Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
+# Visual C++ 2005 and 2008 (VC++ 8.0 and 9.0) create manifest files for EXEs and
# DLLs. These either need copying everywhere with the binaries, or else need
# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
# simplicity, embed them if they exist (and delete them afterwards so that they
# Options
#
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+INCLUDES = -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
CXX_FLAG = -TP -EHsc
-LIBC = msvcrt.lib
+LIBC = msvcrt.lib
.IF "$(CFG)" == "Debug"
OPTIMIZE = -Od -MD -Zi -DDEBUGGING
LINK_DBG = -debug
+.ELIF "$(CFG)" == "DebugSymbols"
+OPTIMIZE = -Od -MD -Zi
+LINK_DBG = -debug
+.ELIF "$(CFG)" == "DebugFull"
+LIBC = msvcrtd.lib
+OPTIMIZE = -Od -MDd -Zi -D_DEBUG -DDEBUGGING
+LINK_DBG = -debug
.ELSE
# -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
OPTIMIZE = -O1 -MD -Zi -DNDEBUG
OPTIMIZE += -fp:precise
.ENDIF
-# For now, silence warnings from VC++ 8.x onwards about "unsafe" CRT functions
+# For now, silence warnings from VC++ 8.0 onwards about "unsafe" CRT functions
# and POSIX CRT function names being deprecated.
.IF "$(PREMSVC80)" == "undef"
DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
.ENDIF
.ENDIF
-LIBBASEFILES = \
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib comctl32.lib
+LIBBASEFILES = oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib \
+ odbc32.lib odbccp32.lib comctl32.lib
# Avoid __intel_new_proc_init link error for libircmt.
# libmmd is /MD equivelent, other variants exist.
EXTRACFLAGS = -nologo -GF -W3
.IF "$(__ICC)" == "define"
-EXTRACFLAGS = $(EXTRACFLAGS) -Qstd=c99
+EXTRACFLAGS += -Qstd=c99
+.ENDIF
+.IF "$(USE_CPLUSPLUS)" == "define"
+EXTRACFLAGS += $(CXX_FLAG)
.ENDIF
CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
-machine:$(PROCESSOR_ARCHITECTURE)
-LIB_FLAGS = $(LIB_FLAGS) -nologo
+LIB_FLAGS += -nologo
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
+PDBOUT = -Fd$*.pdb
+TESTPREPGCC =
.ENDIF
.ENDIF
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-# -- BKS, 12-12-1999
-PRIV_LINK_FLAGS *=
+# For XP support in >= VS 2013 (VC++ 12.0), subsystem is always in Config.pm
+# LINK_FLAGS else subsystem is only needed for EXE building, not XS DLL building
+# Console vs GUI makes no difference for DLLs, so use default for cleaner
+# building cmd lines
+.IF "$(CCTYPE)" == "MSVC120" || "$(CCTYPE)" == "MSVC120FREE" \
+ || "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC140FREE"
+.IF "$(WIN64)" == "define"
+LINK_FLAGS += -subsystem:console,"5.02"
+.ELSE
+LINK_FLAGS += -subsystem:console,"5.01"
+.ENDIF
+PRIV_LINK_FLAGS =
+
+.ELIF "$(CCTYPE)" != "GCC"
+PRIV_LINK_FLAGS = -subsystem:console
+.ENDIF
+
BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
#################### do not edit below this line #######################
.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
.c$(o):
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) $<
.c.i:
$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
.ELSE
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+ $(LINK32) -dll -implib:$(*B).lib -def:$(*B).def \
-out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
$(EMBED_DLL_MANI)
.ENDIF
#
# various targets
+
+#do not put $(MINIPERL) as a dep/prereq in a rule, instead put $(HAVEMINIPERL)
+#$(MINIPERL) is not a buildable target, use "dmake mp" if you want to just build
+#miniperl alone
MINIPERL = ..\miniperl.exe
+HAVEMINIPERL = ..\lib\buildcustomize.pl
MINIDIR = .\mini
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
PERLEXESTATIC = ..\perl-static.exe
STATICDIR = .\static.tmp
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
+CONFIGPM = ..\lib\Config.pm
GENUUDMAP = ..\generate_uudmap.exe
.IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define"
PERLSTATIC = static
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
# from the .dll
-PERLDEP = perldll.def
+PERLDEP = $(PERLIMPLIB)
PL2BAT = bin\pl2bat.pl
..\utils\perlivp \
..\utils\libnetcfg \
..\utils\enc2xs \
+ ..\utils\encguess \
..\utils\piconv \
..\utils\corelist \
..\utils\cpan \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl521$(a)
-PERLSTATICLIB = ..\libperl521s$(a)
+PERLIMPLIB = ..\libperl523$(a)
+PERLSTATICLIB = ..\libperl523s$(a)
INT64 = long long
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= ..\perl521$(a)
-PERLSTATICLIB *= ..\perl521s$(a)
-PERLDLL = ..\perl521.dll
+PERLIMPLIB *= ..\perl523$(a)
+PERLEXPLIB *= ..\perl523.exp
+PERLSTATICLIB *= ..\perl523s$(a)
+PERLDLL = ..\perl523.dll
+
+#EUMM on Win32 isn't ready for parallel make, so only allow this file to be parallel
+#$(MAKE) will contain the -P that this makefile was called with, which is bad for
+#make_ext.pl since upto jobs*jobs processes will run instead of jobs
+#also any recipie containing $(MAKE) is special cased by dmake to execute recipes
+#containing $(MAKE) when "dmake -n" is executed, which causes recursive calls
+#to dmake, which means "dmake -n" is then broken as a diagnostic tool since
+#"dmake -n" will invoke all the make_ext.pl scripts build things instead of
+#showing what to build since $(MAKE) is an arg to make_ext.pl, not an invocation
+#of the dmake process
+PLMAKE = dmake
XCOPY = xcopy /f /r /i /d /y
RCOPY = xcopy /f /r /i /e /d /y
NOOP = @rem
+#first ones are arrange in compile time order for faster parallel building
+#see #123867 for details
MICROCORE_SRC = \
+ ..\toke.c \
+ ..\regcomp.c \
+ ..\regexec.c \
+ ..\op.c \
+ ..\sv.c \
+ ..\pp.c \
+ ..\pp_ctl.c \
+ ..\pp_sys.c \
+ ..\pp_pack.c \
+ ..\pp_hot.c \
+ ..\gv.c \
+ ..\perl.c \
+ ..\utf8.c \
+ ..\dump.c \
+ ..\hv.c \
..\av.c \
..\caretx.c \
..\deb.c \
..\doio.c \
..\doop.c \
- ..\dump.c \
+ ..\dquote.c \
..\globals.c \
- ..\gv.c \
- ..\mro.c \
- ..\hv.c \
+ ..\mro_core.c \
..\locale.c \
..\keywords.c \
..\mathoms.c \
..\mg.c \
..\numeric.c \
- ..\op.c \
..\pad.c \
- ..\perl.c \
..\perlapi.c \
..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_pack.c \
..\pp_sort.c \
- ..\pp_sys.c \
..\reentr.c \
- ..\regcomp.c \
- ..\regexec.c \
..\run.c \
..\scope.c \
- ..\sv.c \
..\taint.c \
- ..\toke.c \
+ ..\time64.c \
..\universal.c \
- ..\utf8.c \
..\util.c
EXTRACORE_SRC += perllib.c
WIN32_SRC = \
.\win32.c \
+ .\win32io.c \
.\win32sck.c \
.\win32thread.c \
.\fcrypt.c
-# We need this for miniperl build unless we override canned
-# config.h #define building mini\*
-#.IF "$(USE_PERLIO)" == "define"
-WIN32_SRC += .\win32io.c
-#.ENDIF
-
CORE_NOCFG_H = \
..\av.h \
..\cop.h \
BITCOUNT_H = ..\bitcount.h
MG_DATA_H = ..\mg_data.h
GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
+#a stub ppport.h must be generated so building XS modules, .c->.obj wise, will
+#work, so this target also represents creating the COREDIR and filling it
+HAVE_COREDIR = $(COREDIR)\ppport.h
+
MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ = $(DYNALOADER)
-GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
cc=$(CC) ~ \
ld=$(LINK32) ~ \
ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ usecplusplus=$(USE_CPLUSPLUS) ~ \
cf_email=$(EMAIL) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
libs=$(LIBFILES:f) ~ \
libperl=$(PERLIMPLIB:f) ~ \
libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
libc=$(LIBC) ~ \
- make=dmake ~ \
+ make=$(PLMAKE) ~ \
_o=$(o) ~ \
obj_ext=$(o) ~ \
_a=$(a) ~ \
usethreads=$(USE_ITHREADS) ~ \
useithreads=$(USE_ITHREADS) ~ \
usemultiplicity=$(USE_MULTI) ~ \
- useperlio=$(USE_PERLIO) ~ \
use64bitint=$(USE_64_BIT_INT) ~ \
uselongdouble=$(USE_LONG_DOUBLE) ~ \
uselargefiles=$(USE_LARGE_FILES) ~ \
# Top targets
#
-all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
- $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
- $(PERLEXE) Extensions Extensions_nonxs $(PERLSTATIC)
-
-regnodes : ..\regnodes.h
+all : CHECKDMAKE rebasePE Extensions_nonxs $(PERLSTATIC)
..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
-reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
- $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
- Extensions_reonly
+reonly : ..\regnodes.h $(UNIDATAFILES) Extensions_reonly
static: $(PERLEXESTATIC)
@exit 1
.ENDIF
-$(GLOBEXE) : perlglob$(o)
+$(GLOBEXE) : perlglob.c
.IF "$(CCTYPE)" == "GCC"
- $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
+ $(LINK32) $(OPTIMIZE) $(BLINK_FLAGS) -mconsole -o $@ perlglob.c $(LIBFILES)
.ELSE
- $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
- $(EMBED_EXE_MANI)
+ $(CC) $(OPTIMIZE) -Fe$@ perlglob.c -link $(BLINK_FLAGS) setargv$(o) \
+ $(LIBFILES) && $(EMBED_EXE_MANI)
.ENDIF
-perlglob$(o) : perlglob.c
-
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
-#
-# Copy the template config.h and set configurables at the end of it
-# as per the options chosen and compiler used.
-# Note: This config.h is only used to build miniperl.exe anyway, but
-# it's as well to have its options correct to be sure that it builds
-# and so that it's "-V" options are correct for use by makedef.pl. The
-# real config.h used to build perl.exe is generated from the top-level
-# config_h.SH by config_h.PL (run by miniperl.exe).
-#
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
- @echo.>>$@
- @echo #ifndef _config_h_footer_>>$@
- @echo #define _config_h_footer_>>$@
- @echo #undef Off_t>>$@
- @echo #undef LSEEKSIZE>>$@
- @echo #undef Off_t_size>>$@
- @echo #undef PTRSIZE>>$@
- @echo #undef SSize_t>>$@
- @echo #undef HAS_ATOLL>>$@
- @echo #undef HAS_STRTOLL>>$@
- @echo #undef HAS_STRTOULL>>$@
- @echo #undef Size_t_size>>$@
- @echo #undef IVTYPE>>$@
- @echo #undef UVTYPE>>$@
- @echo #undef IVSIZE>>$@
- @echo #undef UVSIZE>>$@
- @echo #undef NV_PRESERVES_UV>>$@
- @echo #undef NV_PRESERVES_UV_BITS>>$@
- @echo #undef IVdf>>$@
- @echo #undef UVuf>>$@
- @echo #undef UVof>>$@
- @echo #undef UVxf>>$@
- @echo #undef UVXf>>$@
- @echo #undef USE_64_BIT_INT>>$@
- @echo #undef Gconvert>>$@
- @echo #undef HAS_FREXPL>>$@
- @echo #undef HAS_ISNANL>>$@
- @echo #undef HAS_MODFL>>$@
- @echo #undef HAS_MODFL_PROTO>>$@
- @echo #undef HAS_SQRTL>>$@
- @echo #undef HAS_STRTOLD>>$@
- @echo #undef PERL_PRIfldbl>>$@
- @echo #undef PERL_PRIgldbl>>$@
- @echo #undef PERL_PRIeldbl>>$@
- @echo #undef PERL_SCNfldbl>>$@
- @echo #undef NVTYPE>>$@
- @echo #undef NVSIZE>>$@
- @echo #undef LONG_DOUBLESIZE>>$@
- @echo #undef NV_OVERFLOWS_INTEGERS_AT>>$@
- @echo #undef NVef>>$@
- @echo #undef NVff>>$@
- @echo #undef NVgf>>$@
- @echo #undef USE_LONG_DOUBLE>>$@
-.IF "$(USE_LARGE_FILES)"=="define"
- @echo #define Off_t $(INT64)>>$@
- @echo #define LSEEKSIZE ^8>>$@
- @echo #define Off_t_size ^8>>$@
-.ELSE
- @echo #define Off_t long>>$@
- @echo #define LSEEKSIZE ^4>>$@
- @echo #define Off_t_size ^4>>$@
-.ENDIF
-.IF "$(WIN64)"=="define"
- @echo #define PTRSIZE ^8>>$@
- @echo #define SSize_t $(INT64)>>$@
- @echo #define HAS_ATOLL>>$@
- @echo #define HAS_STRTOLL>>$@
- @echo #define HAS_STRTOULL>>$@
- @echo #define Size_t_size ^8>>$@
-.ELSE
- @echo #define PTRSIZE ^4>>$@
- @echo #define SSize_t int>>$@
- @echo #undef HAS_ATOLL>>$@
- @echo #undef HAS_STRTOLL>>$@
- @echo #undef HAS_STRTOULL>>$@
- @echo #define Size_t_size ^4>>$@
-.ENDIF
-.IF "$(USE_64_BIT_INT)"=="define"
- @echo #define IVTYPE $(INT64)>>$@
- @echo #define UVTYPE unsigned $(INT64)>>$@
- @echo #define IVSIZE ^8>>$@
- @echo #define UVSIZE ^8>>$@
-.IF "$(USE_LONG_DOUBLE)"=="define"
- @echo #define NV_PRESERVES_UV>>$@
- @echo #define NV_PRESERVES_UV_BITS 64>>$@
-.ELSE
- @echo #undef NV_PRESERVES_UV>>$@
- @echo #define NV_PRESERVES_UV_BITS 53>>$@
-.ENDIF
- @echo #define IVdf "I64d">>$@
- @echo #define UVuf "I64u">>$@
- @echo #define UVof "I64o">>$@
- @echo #define UVxf "I64x">>$@
- @echo #define UVXf "I64X">>$@
- @echo #define USE_64_BIT_INT>>$@
-.ELSE
- @echo #define IVTYPE long>>$@
- @echo #define UVTYPE unsigned long>>$@
- @echo #define IVSIZE ^4>>$@
- @echo #define UVSIZE ^4>>$@
- @echo #define NV_PRESERVES_UV>>$@
- @echo #define NV_PRESERVES_UV_BITS 32>>$@
- @echo #define IVdf "ld">>$@
- @echo #define UVuf "lu">>$@
- @echo #define UVof "lo">>$@
- @echo #define UVxf "lx">>$@
- @echo #define UVXf "lX">>$@
- @echo #undef USE_64_BIT_INT>>$@
-.ENDIF
-.IF "$(USE_LONG_DOUBLE)"=="define"
- @echo #define Gconvert(x,n,t,b) sprintf((b),"%.*""Lg",(n),(x))>>$@
- @echo #define HAS_FREXPL>>$@
- @echo #define HAS_ISNANL>>$@
- @echo #define HAS_MODFL>>$@
- @echo #define HAS_MODFL_PROTO>>$@
- @echo #define HAS_SQRTL>>$@
- @echo #define HAS_STRTOLD>>$@
- @echo #define PERL_PRIfldbl "Lf">>$@
- @echo #define PERL_PRIgldbl "Lg">>$@
- @echo #define PERL_PRIeldbl "Le">>$@
- @echo #define PERL_SCNfldbl "Lf">>$@
- @echo #define NVTYPE long double>>$@
-.IF "$(WIN64)"=="define"
- @echo #define NVSIZE ^16>>$@
- @echo #define LONG_DOUBLESIZE ^16>>$@
-.ELSE
- @echo #define NVSIZE ^12>>$@
- @echo #define LONG_DOUBLESIZE ^12>>$@
-.ENDIF
- @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0>>$@
- @echo #define NVef "Le">>$@
- @echo #define NVff "Lf">>$@
- @echo #define NVgf "Lg">>$@
- @echo #define USE_LONG_DOUBLE>>$@
-.ELSE
- @echo #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))>>$@
- @echo #undef HAS_FREXPL>>$@
- @echo #undef HAS_ISNANL>>$@
- @echo #undef HAS_MODFL>>$@
- @echo #undef HAS_MODFL_PROTO>>$@
- @echo #undef HAS_SQRTL>>$@
- @echo #undef HAS_STRTOLD>>$@
- @echo #undef PERL_PRIfldbl>>$@
- @echo #undef PERL_PRIgldbl>>$@
- @echo #undef PERL_PRIeldbl>>$@
- @echo #undef PERL_SCNfldbl>>$@
- @echo #define NVTYPE double>>$@
- @echo #define NVSIZE ^8>>$@
- @echo #define LONG_DOUBLESIZE ^8>>$@
- @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0>>$@
- @echo #define NVef "e">>$@
- @echo #define NVff "f">>$@
- @echo #define NVgf "g">>$@
- @echo #undef USE_LONG_DOUBLE>>$@
-.ENDIF
- @echo #endif>>$@
-
-..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
+..\git_version.h : $(HAVEMINIPERL) ..\make_patchnum.pl
cd .. && miniperl -Ilib make_patchnum.pl
# make sure that we recompile perl.c if the git version changes
..\perl$(o) : ..\git_version.h
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
+..\config.sh : config.w32 $(HAVEMINIPERL) config_sh.PL FindExt.pm
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
$(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
# This target is for when changes to the main config.sh happen.
# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
-# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
+# with MULTI, ITHREADS, IMP_SYS and LARGE_FILES off), then make
# this target to regenerate config_H.gc.
regen_config_h:
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
-$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
rename config.h $(CFGH_TMPL)
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
+$(CONFIGPM): ..\config.sh config_h.PL
$(MINIPERL) -I..\lib ..\configpm --chdir=..
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
+ $(XCOPY) config.h $(COREDIR)\*.*
+ -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
-# See the comment in Makefile.SH explaining this seemingly cranky ordering
-$(MINIPERL) : ..\lib\buildcustomize.pl
+.\config.h : $(CONFIGPM)
-..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
+# See the comment in Makefile.SH explaining this seemingly cranky ordering
+..\lib\buildcustomize.pl : $(MINI_OBJ) ..\write_buildcustomize.pl
.IF "$(CCTYPE)" == "GCC"
$(LINK32) -v -mconsole -o $(MINIPERL) $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
.ELSE
- $(LINK32) -subsystem:console -out:$(MINIPERL) $(BLINK_FLAGS) \
- @$(mktmp $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ))
+ $(LINK32) -out:$(MINIPERL) $(BLINK_FLAGS) \
+ @$(mktmp $(DELAYLOAD) $(MINIDELAYLOAD) $(LIBFILES) $(MINI_OBJ))
$(EMBED_EXE_MANI:s/$@/$(MINIPERL)/)
.ENDIF
$(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
-$(MINIDIR) :
+#convinence target, get a working miniperl
+mp : $(CONFIGPM)
+
+$(MINIDIR)\.exists : $(CFGH_TMPL)
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+#
+# Copy the template config.h and set configurables at the end of it
+# as per the options chosen and compiler used.
+# Note: This config.h is only used to build miniperl.exe anyway, but
+# it's as well to have its options correct to be sure that it builds
+# and so that it's "-V" options are correct for use by makedef.pl. The
+# real config.h used to build perl.exe is generated from the top-level
+# config_h.SH by config_h.PL (run by miniperl.exe).
+#
+# MINIDIR generates config.h so miniperl.exe is not rebuilt when the 2nd
+# config.h is generated in CONFIGPM target, see also the comments for $(MINI_OBJ).
+ -if exist config.h del /f config.h
+ copy $(CFGH_TMPL) config.h
+ @(echo.&& \
+ echo #ifndef _config_h_footer_&& \
+ echo #define _config_h_footer_&& \
+ echo #undef Off_t&& \
+ echo #undef LSEEKSIZE&& \
+ echo #undef Off_t_size&& \
+ echo #undef PTRSIZE&& \
+ echo #undef SSize_t&& \
+ echo #undef HAS_ATOLL&& \
+ echo #undef HAS_STRTOLL&& \
+ echo #undef HAS_STRTOULL&& \
+ echo #undef Size_t_size&& \
+ echo #undef IVTYPE&& \
+ echo #undef UVTYPE&& \
+ echo #undef IVSIZE&& \
+ echo #undef UVSIZE&& \
+ echo #undef NV_PRESERVES_UV&& \
+ echo #undef NV_PRESERVES_UV_BITS&& \
+ echo #undef IVdf&& \
+ echo #undef UVuf&& \
+ echo #undef UVof&& \
+ echo #undef UVxf&& \
+ echo #undef UVXf&& \
+ echo #undef USE_64_BIT_INT&& \
+ echo #undef Gconvert&& \
+ echo #undef HAS_FREXPL&& \
+ echo #undef HAS_ISNANL&& \
+ echo #undef HAS_MODFL&& \
+ echo #undef HAS_MODFL_PROTO&& \
+ echo #undef HAS_SQRTL&& \
+ echo #undef HAS_STRTOLD&& \
+ echo #undef PERL_PRIfldbl&& \
+ echo #undef PERL_PRIgldbl&& \
+ echo #undef PERL_PRIeldbl&& \
+ echo #undef PERL_SCNfldbl&& \
+ echo #undef NVTYPE&& \
+ echo #undef NVSIZE&& \
+ echo #undef LONG_DOUBLESIZE&& \
+ echo #undef NV_OVERFLOWS_INTEGERS_AT&& \
+ echo #undef NVef&& \
+ echo #undef NVff&& \
+ echo #undef NVgf&& \
+ echo #undef USE_LONG_DOUBLE&& \
+ echo #undef USE_CPLUSPLUS)>> config.h
+.IF "$(USE_LARGE_FILES)"=="define"
+ @(echo #define Off_t $(INT64)&& \
+ echo #define LSEEKSIZE ^8&& \
+ echo #define Off_t_size ^8)>> config.h
+.ELSE
+ @(echo #define Off_t long&& \
+ echo #define LSEEKSIZE ^4&& \
+ echo #define Off_t_size ^4)>> config.h
+.ENDIF
+.IF "$(WIN64)"=="define"
+ @(echo #define PTRSIZE ^8&& \
+ echo #define SSize_t $(INT64)&& \
+ echo #define HAS_ATOLL&& \
+ echo #define HAS_STRTOLL&& \
+ echo #define HAS_STRTOULL&& \
+ echo #define Size_t_size ^8)>> config.h
+.ELSE
+ @(echo #define PTRSIZE ^4&& \
+ echo #define SSize_t int&& \
+ echo #undef HAS_ATOLL&& \
+ echo #undef HAS_STRTOLL&& \
+ echo #undef HAS_STRTOULL&& \
+ echo #define Size_t_size ^4)>> config.h
+.ENDIF
+.IF "$(USE_64_BIT_INT)"=="define"
+ @(echo #define IVTYPE $(INT64)&& \
+ echo #define UVTYPE unsigned $(INT64)&& \
+ echo #define IVSIZE ^8&& \
+ echo #define UVSIZE ^8)>> config.h
+.IF "$(USE_LONG_DOUBLE)"=="define"
+ @(echo #define NV_PRESERVES_UV&& \
+ echo #define NV_PRESERVES_UV_BITS 64)>> config.h
+.ELSE
+ @(echo #undef NV_PRESERVES_UV&& \
+ echo #define NV_PRESERVES_UV_BITS 53)>> config.h
+.ENDIF
+ @(echo #define IVdf "I64d"&& \
+ echo #define UVuf "I64u"&& \
+ echo #define UVof "I64o"&& \
+ echo #define UVxf "I64x"&& \
+ echo #define UVXf "I64X"&& \
+ echo #define USE_64_BIT_INT)>> config.h
+.ELSE
+ @(echo #define IVTYPE long&& \
+ echo #define UVTYPE unsigned long&& \
+ echo #define IVSIZE ^4&& \
+ echo #define UVSIZE ^4&& \
+ echo #define NV_PRESERVES_UV&& \
+ echo #define NV_PRESERVES_UV_BITS 32&& \
+ echo #define IVdf "ld"&& \
+ echo #define UVuf "lu"&& \
+ echo #define UVof "lo"&& \
+ echo #define UVxf "lx"&& \
+ echo #define UVXf "lX"&& \
+ echo #undef USE_64_BIT_INT)>> config.h
+.ENDIF
+.IF "$(USE_LONG_DOUBLE)"=="define"
+ @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%.*""Lg",^(n^),^(x^)^)&& \
+ echo #define HAS_FREXPL&& \
+ echo #define HAS_ISNANL&& \
+ echo #define HAS_MODFL&& \
+ echo #define HAS_MODFL_PROTO&& \
+ echo #define HAS_SQRTL&& \
+ echo #define HAS_STRTOLD&& \
+ echo #define PERL_PRIfldbl "Lf"&& \
+ echo #define PERL_PRIgldbl "Lg"&& \
+ echo #define PERL_PRIeldbl "Le"&& \
+ echo #define PERL_SCNfldbl "Lf"&& \
+ echo #define NVTYPE long double)>> config.h
+.IF "$(WIN64)"=="define"
+ @(echo #define NVSIZE ^16&& \
+ echo #define LONG_DOUBLESIZE ^16)>> config.h
+.ELSE
+ @(echo #define NVSIZE ^12&& \
+ echo #define LONG_DOUBLESIZE ^12)>> config.h
+.ENDIF
+ @(echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0&& \
+ echo #define NVef "Le"&& \
+ echo #define NVff "Lf"&& \
+ echo #define NVgf "Lg"&& \
+ echo #define USE_LONG_DOUBLE)>> config.h
+.ELSE
+ @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%.*g",^(n^),^(x^)^)&& \
+ echo #undef HAS_FREXPL&& \
+ echo #undef HAS_ISNANL&& \
+ echo #undef HAS_MODFL&& \
+ echo #undef HAS_MODFL_PROTO&& \
+ echo #undef HAS_SQRTL&& \
+ echo #undef HAS_STRTOLD&& \
+ echo #undef PERL_PRIfldbl&& \
+ echo #undef PERL_PRIgldbl&& \
+ echo #undef PERL_PRIeldbl&& \
+ echo #undef PERL_SCNfldbl&& \
+ echo #define NVTYPE double&& \
+ echo #define NVSIZE ^8&& \
+ echo #define LONG_DOUBLESIZE ^8&& \
+ echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0&& \
+ echo #define NVef "e"&& \
+ echo #define NVff "f"&& \
+ echo #define NVgf "g"&& \
+ echo #undef USE_LONG_DOUBLE)>> config.h
+.ENDIF
+.IF "$(USE_CPLUSPLUS)"=="define"
+ @(echo #define USE_CPLUSPLUS&& \
+ echo #endif)>> config.h
+.ELSE
+ @(echo #undef USE_CPLUSPLUS&& \
+ echo #endif)>> config.h
+.ENDIF
+#separate line since this is sentinal that this target is done
+ rem. > $(MINIDIR)\.exists
$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
+ $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) ..\$(*B).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*B).c
+ $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) $(*B).c
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
# unless the .IF is true), so instead we use a .ELSE with the default.
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
+perllib$(o) : perllib.c perllibst.h .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
.ELSE
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
.ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
-$(MINI_OBJ) : $(CORE_NOCFG_H)
+$(MINI_OBJ) : $(MINIDIR)\.exists $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
+
+perllibst.h : $(HAVEMINIPERL) $(CONFIGPM) create_perllibst_h.pl
$(MINIPERL) -I..\lib create_perllibst_h.pl
+
+perldll.def : $(HAVEMINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl
$(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
+$(PERLIMPLIB) : perldll.def
+.IF "$(CCTYPE)" == "GCC"
+ $(IMPLIB) -k -d perldll.def -l $(PERLIMPLIB)
+.ELSE #VC family
+ lib -def:perldll.def -machine:$(ARCHITECTURE) /OUT:$(PERLIMPLIB)
+.ENDIF
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+#PERLEXPLIB is built in PERLIMPLIB
+$(PERLEXPLIB): $(PERLIMPLIB)
+
+$(PERLDLL): $(PERLEXPLIB) $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ) \
$(shell @type Extensions_static) \
$(LIBFILES) perl.exp $(LKPOST))
.ELSE
- $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
+ $(LINK32) -dll -out:$@ $(BLINK_FLAGS) \
@Extensions_static \
@$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ))
+ $(PERLDLL_RES) $(PERLDLL_OBJ) $(PERLEXPLIB))
$(EMBED_DLL_MANI)
.ENDIF
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
.IF "$(CCTYPE)" == "GCC"
$(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
@$(mktmp $(PERLDLL_OBJ))
.ENDIF
- $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
+ $(XCOPY) $(PERLSTATICLIB) $(COREDIR)\$(NULL)
$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
-$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
-
-$(BITCOUNT_H) : $(GENUUDMAP)
- $(GENUUDMAP) $(GENERATED_HEADERS)
-
-$(GENUUDMAP_OBJ) : ..\mg_raw.h
-
-$(GENUUDMAP) : $(GENUUDMAP_OBJ)
+$(GENUUDMAP) $(GENERATED_HEADERS) .UPDATEALL : ..\mg_raw.h
.IF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
+ $(LINK32) $(CFLAGS_O) -o..\generate_uudmap.exe ..\generate_uudmap.c \
+ $(BLINK_FLAGS) -x $(mktmp $(LKPRE) $(LIBFILES) $(LKPOST))
.ELSE
- $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
- @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
- $(EMBED_EXE_MANI)
+ $(CC) $(CFLAGS_O) -Fe..\generate_uudmap.exe ..\generate_uudmap.c @$(mktmp -link $(LIBFILES)) -link $(BLINK_FLAGS)
+ $(EMBED_EXE_MANI:s/$@/..\generate_uudmap.exe/)
.ENDIF
+ $(GENUUDMAP) $(GENERATED_HEADERS)
+
+#This generates a stub ppport.h & creates & fills /lib/CORE to allow for XS
+#building .c->.obj wise (linking is a different thing). This taget is AKA
+#$(HAVE_COREDIR).
+$(COREDIR)\ppport.h : $(CORE_H)
+ $(XCOPY) *.h $(COREDIR)\*.* && $(RCOPY) include $(COREDIR)\*.* && $(XCOPY) ..\*.h $(COREDIR)\*.*
+ rem. > $@
perlmain.c : runperl.c
copy runperl.c perlmain.c
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
+perlmain$(o) : $(CONFIGPM) perlmain.c
+ $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ $(PDBOUT) -c perlmain.c
perlmainst.c : runperl.c
copy runperl.c perlmainst.c
-perlmainst$(o) : perlmainst.c
- $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
+perlmainst$(o) : $(CONFIGPM) perlmainst.c
+ $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) -c perlmainst.c
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+$(PERLEXE): $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB)
.IF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
+ $(LINK32) -out:$@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
$(EMBED_EXE_MANI)
.ENDIF
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
+ $(LINK32) -out:$@ $(BLINK_FLAGS) \
$(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
$(EMBED_EXE_MANI)
.ENDIF
-MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
- $(MINIPERL) -I..\lib ..\mkppport
-
#-------------------------------------------------------------------------------
# There's no direct way to mark a dependency on
# DynaLoader.pm, so this will have to do
-Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
-Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
+#most of deps of this target are in DYNALOADER and therefore omitted here
+Extensions : $(PERLDEP) $(DYNALOADER) $(GLOBEXE)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic !Unicode/Normalize
-Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
+Extensions_normalize : $(PERLDEP) $(DYNALOADER) $(GLOBEXE) $(UNIDATAFILES)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +Unicode/Normalize
+
+Extensions_reonly : $(PERLDEP) $(DYNALOADER)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
+
+Extensions_static : ..\make_ext.pl list_static_libs.pl $(CONFIGPM) $(GLOBEXE) $(HAVE_COREDIR)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
-Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
+Extensions_nonxs : ..\make_ext.pl ..\pod\perlfunc.pod $(CONFIGPM) $(GLOBEXE)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs !libs
-$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
+#lib must be built, it can't be buildcustomize.pl-ed, and is required for XS building
+$(DYNALOADER) : ..\make_ext.pl $(CONFIGPM) $(HAVE_COREDIR)
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(EXTDIR) --dir=$(DISTDIR) --dynaloader lib
Extensions_clean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
Extensions_realclean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
+
+# all PE files need to be built by the time this target runs, PP files can still
+# be running in parallel like UNIDATAFILES, this target a placeholder for the
+# future
+.IF "$(BUILD_STATIC)"=="define"
+rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE) $(GLOBEXE) $(PERLEXESTATIC)
+.ELSE
+rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE) $(GLOBEXE)
+.ENDIF
+ $(NOOP)
#-------------------------------------------------------------------------------
-doc: $(PERLEXE) ..\pod\perltoc.pod
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
+doc: $(PERLEXE) $(PERLDLL) ..\pod\perltoc.pod
+ $(PERLEXE) ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
--podpath=pod:lib:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--recurse
# Note that this next section is parsed (and regenerated) by pod/buildtoc
# so please check that script before making structural changes here
-utils: $(PERLEXE) ..\utils\Makefile
- cd ..\utils && $(MAKE) PERL=$(MINIPERL)
+utils: $(HAVEMINIPERL) ..\utils\Makefile
+ cd ..\utils && $(PLMAKE) PERL=$(MINIPERL)
copy ..\README.aix ..\pod\perlaix.pod
copy ..\README.amiga ..\pod\perlamiga.pod
copy ..\README.android ..\pod\perlandroid.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl5217delta.pod
- $(PERLEXE) $(PL2BAT) $(UTILS)
+ copy ..\pod\perldelta.pod ..\pod\perl5235delta.pod
+ $(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
$(MINIPERL) -I..\lib ..\autodoc.pl ..
$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
-..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
+..\pod\perltoc.pod: $(PERLEXE) $(PERLDLL) Extensions Extensions_nonxs ..\pod\perluniprops.pod utils
$(PERLEXE) -f ..\pod\buildtoc -q
# Note that the pod cleanup in this next section is parsed (and regenerated
-del /f $(LIBDIR)\buildcustomize.pl
-del /f $(DISTDIR)\XSLoader\XSLoader.pm
-del /f *.def *.map
+ -if exist $(LIBDIR)\Amiga rmdir /s /q $(LIBDIR)\Amiga
-if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
-if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
-if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat roffitall \
- perl5217delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+ perl5235delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
perlwin32.pod
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
- perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
+ perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \
xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
-del /f ..\config.sh perlmain.c dlutils.c config.h.new \
perlmainst.c
installbare : utils ..\pod\perltoc.pod
$(PERLEXE) ..\installperl
+ attrib -r $(INST_COREDIR)\ppport.h && del $(INST_COREDIR)\ppport.h
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
inst_lib : $(CONFIGPM)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
+$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(CONFIGPM) ..\lib\unicore\mktables
cd ..\lib\unicore && \
- ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
+ ..\$(MINIPERL) -I.. mktables -P ..\..\pod -maketest -makelist -p
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
+minitest : .\config.h $(HAVEMINIPERL) ..\git_version.h $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) $(TESTPREPGCC)
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
if exist ..\t\perl.exe del /f ..\t\perl.exe
rename ..\t\miniperl.exe perl.exe
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- attrib -r ..\t\*.*
- cd ..\t && \
- $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
+# Note this perl.exe is miniperl
+ cd ..\t && perl.exe TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t pragma/*.t
+
+test-prep : all utils ..\pod\perltoc.pod $(TESTPREPGCC)
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL) && $(XCOPY) $(PERLDLL) ..\t\$(NULL) \
+ && $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-test-prep : all utils ..\pod\perltoc.pod
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "GCC"
# If building with gcc versions 4.x.x or greater, then
# the GCC helper DLL will also need copied to the test directory.
# The name of the dll can change, depending upon which vendor has supplied
# your compiler, and upon the values of "x".
# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
# Without this copying, the op/taint.t test script will fail.
+
+.IF "$(CCTYPE)" == "GCC"
+
+test-prep-gcc :
if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
+
.ENDIF
test : test-prep
set PERL_STATIC_EXT=$(STATIC_EXT) && \
- cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+ cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
test_porting : test-prep
set PERL_STATIC_EXT=$(STATIC_EXT) && \
- cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
+ cd ..\t && perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
test-reonly : reonly utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
- cd ..\t && \
- $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
- cd ..\win32
+ cd ..\t && perl.exe harness $(OPT) -re \bpat\\/ $(EXTRA)
regen :
- cd .. && regen.pl && cd win32
+ cd .. && regen.pl
test-notty : test-prep
set PERL_STATIC_EXT=$(STATIC_EXT) && \
set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+ cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
_test :
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
set PERL_STATIC_EXT=$(STATIC_EXT) && \
- cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+ cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
_clean :
-@erase miniperlmain$(o)
-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-@erase *.ilk
- -@erase *.pdb
+ -@erase *.pdb ..\*.pdb
-@erase Extensions_static
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "dmake nok" instead.
ok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+ $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)"
okfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+ $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
nok: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+ $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)"
nokfile: utils
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+ $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
https://perl5.git.perl.org / perl5.git / blobdiff