-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
- */
-#$d_fd_set HAS_FD_SET /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
- */
-#define Gconvert(x,n,t,b) $d_Gconvert
-
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
- */
-#$d_getpagsz HAS_GETPAGESIZE /**/
-
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-#$d_gnulibc HAS_GNULIBC /**/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
- */
-#$d_isascii HAS_ISASCII /**/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-#$d_lchown HAS_LCHOWN /**/
-
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
- */
-#$d_open3 HAS_OPEN3 /**/
-
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-#$d_safebcpy HAS_SAFE_BCOPY /**/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
-
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-#$d_sigaction HAS_SIGACTION /**/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-#$d_sigsetjmp HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#$d_stdstdio USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
-#$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/
-#$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#$d_stdiobase USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-#endif
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE $doublesize /**/
-
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
- */
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
- */
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
-#$d_tm_tm_zone HAS_TM_TM_ZONE /**/
-#$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE $ptrsize /**/
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t $ssizetype /* signed count of bytes */
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-#$ebcdic EBCDIC /**/
-
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for $package. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_archlib ARCHLIB "$archlib" /**/
-#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
-
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-#define BIN "$bin" /**/
-#define BIN_EXP "$binexp" /**/
-
-/* PERL_INC_VERSION_LIST:
- * This variable specifies the list of subdirectories in over
- * which perl.c:incpush() and lib/lib.pm will automatically
- * search when adding directories to @INC, in a format suitable
- * for a C initialization string. See the inc_version_list entry
- * in Porting/Glossary for more details.
- */
-#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
- */
-#$installusrbinperl INSTALL_USR_BIN_PERL /**/
-
-/* PERL_OTHERLIBDIRS:
- * This variable contains a colon-separated set of paths for the perl
- * binary to search for additional library files or modules.
- * These directories will be tacked to the end of @INC.
- * Perl will automatically search below each path for version-
- * and architecture-specific directories. See PERL_INC_VERSION_LIST
- * for more details.
- */
-#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "$privlib" /**/
-#define PRIVLIB_EXP "$privlibexp" /**/
-
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define SITEARCH "$sitearch" /**/
-#define SITEARCH_EXP "$sitearchexp" /**/
-
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-#define SITELIB "$sitelib" /**/
-#define SITELIB_EXP "$sitelibexp" /**/
-#define SITELIB_STEM "$sitelib_stem" /**/
-
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/
-#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/
-
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.