=head1 NAME
-perlfaq4 - Data Manipulation ($Revision: 1.19 $, $Date: 1997/04/24 22:43:57 $)
+perlfaq4 - Data Manipulation ($Revision: 1.49 $, $Date: 1999/05/23 20:37:49 $)
=head1 DESCRIPTION
=head2 Why am I getting long decimals (eg, 19.9499999999999) instead of the numbers I should be getting (eg, 19.95)?
+The infinite set that a mathematician thinks of as the real numbers can
+only be approximate on a computer, since the computer only has a finite
+number of bits to store an infinite number of, um, numbers.
+
Internally, your computer represents floating-point numbers in binary.
-Floating-point numbers read in from a file, or appearing as literals
-in your program, are converted from their decimal floating-point
+Floating-point numbers read in from a file or appearing as literals
+in your program are converted from their decimal floating-point
representation (eg, 19.95) to the internal binary representation.
However, 19.95 can't be precisely represented as a binary
To get rid of the superfluous digits, just use a format (eg,
C<printf("%.2f", 19.95)>) to get the required precision.
+See L<perlop/"Floating-point Arithmetic">.
=head2 Why isn't my octal data interpreted correctly?
chmod(644, $file); # WRONG -- perl -w catches this
chmod(0644, $file); # right
-=head2 Does perl have a round function? What about ceil() and floor()?
-Trig functions?
+=head2 Does Perl have a round() function? What about ceil() and floor()? Trig functions?
+
+Remember that int() merely truncates toward 0. For rounding to a
+certain number of digits, sprintf() or printf() is usually the easiest
+route.
-For rounding to a certain number of digits, sprintf() or printf() is
-usually the easiest route.
+ printf("%.3f", 3.1415926535); # prints 3.142
The POSIX module (part of the standard perl distribution) implements
ceil(), floor(), and a number of other mathematical and trigonometric
functions.
+ use POSIX;
+ $ceil = ceil(3.5); # 4
+ $floor = floor(3.5); # 3
+
In 5.000 to 5.003 Perls, trigonometry was done in the Math::Complex
module. With 5.004, the Math::Trig module (part of the standard perl
distribution) implements the trigonometric functions. Internally it
being used by Perl, but to instead implement the rounding function you
need yourself.
+To see why, notice how you'll still have an issue on half-way-point
+alternation:
+
+ for ($i = 0; $i < 1.01; $i += 0.05) { printf "%.1f ",$i}
+
+ 0.0 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.7
+ 0.8 0.8 0.9 0.9 1.0 1.0
+
+Don't blame Perl. It's the same as in C. IEEE says we have to do this.
+Perl numbers whose absolute values are integers under 2**31 (on 32 bit
+machines) will work pretty much like mathematical integers. Other numbers
+are not guaranteed.
+
=head2 How do I convert bits into ints?
-To turn a string of 1s and 0s like '10110110' into a scalar containing
-its binary value, use the pack() function (documented in
-L<perlfunc/"pack">):
+To turn a string of 1s and 0s like C<10110110> into a scalar containing
+its binary value, use the pack() and unpack() functions (documented in
+L<perlfunc/"pack" L<perlfunc/"unpack">):
+
+ $decimal = unpack('c', pack('B8', '10110110'));
+
+This packs the string C<10110110> into an eight bit binary structure.
+This is then unpack as a character, which returns its ordinal value.
- $decimal = pack('B8', '10110110');
+This does the same thing:
+
+ $decimal = ord(pack('B8', '10110110'));
Here's an example of going the other way:
- $binary_string = join('', unpack('B*', "\x29"));
+ $binary_string = unpack('B*', "\x29");
+
+=head2 Why doesn't & work the way I want it to?
+
+The behavior of binary arithmetic operators depends on whether they're
+used on numbers or strings. The operators treat a string as a series
+of bits and work with that (the string C<"3"> is the bit pattern
+C<00110011>). The operators work with the binary form of a number
+(the number C<3> is treated as the bit pattern C<00000011>).
+
+So, saying C<11 & 3> performs the "and" operation on numbers (yielding
+C<1>). Saying C<"11" & "3"> performs the "and" operation on strings
+(yielding C<"1">).
+
+Most problems with C<&> and C<|> arise because the programmer thinks
+they have a number but really it's a string. The rest arise because
+the programmer says:
+
+ if ("\020\020" & "\101\101") {
+ # ...
+ }
+
+but a string consisting of two null bytes (the result of C<"\020\020"
+& "\101\101">) is not a false value in Perl. You need:
+
+ if ( ("\020\020" & "\101\101") !~ /[^\000]/) {
+ # ...
+ }
=head2 How do I multiply matrices?
results:
foreach $iterator (@array) {
- &my_func($iterator);
+ some_func($iterator);
}
To call a function on each integer in a (small) range, you B<can> use:
- @results = map { &my_func($_) } (5 .. 25);
+ @results = map { some_func($_) } (5 .. 25);
but you should be aware that the C<..> operator creates an array of
all integers in the range. This can take a lot of memory for large
@results = ();
for ($i=5; $i < 500_005; $i++) {
- push(@results, &my_func($i));
+ push(@results, some_func($i));
}
=head2 How can I output Roman numerals?
=head2 Why aren't my random numbers random?
-The short explanation is that you're getting pseudorandom numbers, not
-random ones, because that's how these things work. A longer
-explanation is available on
+If you're using a version of Perl before 5.004, you must call C<srand>
+once at the start of your program to seed the random number generator.
+5.004 and later automatically call C<srand> at the beginning. Don't
+call C<srand> more than once--you make your numbers less random, rather
+than more.
+
+Computers are good at being predictable and bad at being random
+(despite appearances caused by bugs in your programs :-).
http://www.perl.com/CPAN/doc/FMTEYEWTK/random, courtesy of Tom
-Phoenix.
+Phoenix, talks more about this.. John von Neumann said, ``Anyone who
+attempts to generate random numbers by deterministic means is, of
+course, living in a state of sin.''
-You should also check out the Math::TrulyRandom module from CPAN.
+If you want numbers that are more random than C<rand> with C<srand>
+provides, you should also check out the Math::TrulyRandom module from
+CPAN. It uses the imperfections in your system's timer to generate
+random numbers, but this takes quite a while. If you want a better
+pseudorandom generator than comes with your operating system, look at
+``Numerical Recipes in C'' at http://www.nr.com/ .
=head1 Data: Dates
$week_of_year = int($day_of_year / 7);
-Of course, this believes that weeks start at zero.
-
-=head2 How can I compare two date strings?
-
-Use the Date::Manip or Date::DateCalc modules from CPAN.
+Of course, this believes that weeks start at zero. The Date::Calc
+module from CPAN has a lot of date calculation functions, including
+day of the year, week of the year, and so on. Note that not
+all businesses consider ``week 1'' to be the same; for example,
+American businesses often consider the first week with a Monday
+in it to be Work Week #1, despite ISO 8601, which considers
+WW1 to be the first week with a Thursday in it.
+
+=head2 How do I find the current century or millennium?
+
+Use the following simple functions:
+
+ sub get_century {
+ return int((((localtime(shift || time))[5] + 1999))/100);
+ }
+ sub get_millennium {
+ return 1+int((((localtime(shift || time))[5] + 1899))/1000);
+ }
+
+On some systems, you'll find that the POSIX module's strftime() function
+has been extended in a non-standard way to use a C<%C> format, which they
+sometimes claim is the "century". It isn't, because on most such systems,
+this is only the first two digits of the four-digit year, and thus cannot
+be used to reliably determine the current century or millennium.
+
+=head2 How can I compare two dates and find the difference?
+
+If you're storing your dates as epoch seconds then simply subtract one
+from the other. If you've got a structured date (distinct year, day,
+month, hour, minute, seconds values), then for reasons of accessibility,
+simplicity, and efficiency, merely use either timelocal or timegm (from
+the Time::Local module in the standard distribution) to reduce structured
+dates to epoch seconds. However, if you don't know the precise format of
+your dates, then you should probably use either of the Date::Manip and
+Date::Calc modules from CPAN before you go hacking up your own parsing
+routine to handle arbitrary date formats.
=head2 How can I take a string and turn it into epoch seconds?
If it's a regular enough string that it always has the same format,
-you can split it up and pass the parts to timelocal in the standard
-Time::Local module. Otherwise, you should look into one of the
-Date modules from CPAN.
+you can split it up and pass the parts to C<timelocal> in the standard
+Time::Local module. Otherwise, you should look into the Date::Calc
+and Date::Manip modules from CPAN.
=head2 How can I find the Julian Day?
-Neither Date::Manip nor Date::DateCalc deal with Julian days.
-Instead, there is an example of Julian date calculation in
-http://www.perl.com/CPAN/authors/David_Muir_Sharnoff/modules/Time/JulianDay.pm.gz,
-which should help.
-
-=head2 Does Perl have a year 2000 problem?
-
-Not unless you use Perl to create one. The date and time functions
-supplied with perl (gmtime and localtime) supply adequate information
-to determine the year well beyond 2000 (2038 is when trouble strikes).
-The year returned by these functions when used in an array context is
-the year minus 1900. For years between 1910 and 1999 this I<happens>
-to be a 2-digit decimal number. To avoid the year 2000 problem simply
-do not treat the year as a 2-digit number. It isn't.
-
-When gmtime() and localtime() are used in a scalar context they return
+You could use Date::Calc's Delta_Days function and calculate the number
+of days from there. Assuming that's what you really want, that is.
+
+Before you immerse yourself too deeply in this, be sure to verify that it
+is the I<Julian> Day you really want. Are they really just interested in
+a way of getting serial days so that they can do date arithmetic? If you
+are interested in performing date arithmetic, this can be done using
+either Date::Manip or Date::Calc, without converting to Julian Day first.
+
+There is too much confusion on this issue to cover in this FAQ, but the
+term is applied (correctly) to a calendar now supplanted by the Gregorian
+Calendar, with the Julian Calendar failing to adjust properly for leap
+years on centennial years (among other annoyances). The term is also used
+(incorrectly) to mean: [1] days in the Gregorian Calendar; and [2] days
+since a particular starting time or `epoch', usually 1970 in the Unix
+world and 1980 in the MS-DOS/Windows world. If you find that it is not
+the first meaning that you really want, then check out the Date::Manip
+and Date::Calc modules. (Thanks to David Cassell for most of this text.)
+
+There is also an example of Julian date calculation that should help you in
+http://www.perl.com/CPAN/authors/David_Muir_Sharnoff/modules/Time/JulianDay.pm.gz
+
+=head2 How do I find yesterday's date?
+
+The C<time()> function returns the current time in seconds since the
+epoch. Take twenty-four hours off that:
+
+ $yesterday = time() - ( 24 * 60 * 60 );
+
+Then you can pass this to C<localtime()> and get the individual year,
+month, day, hour, minute, seconds values.
+
+Note very carefully that the code above assumes that your days are
+twenty-four hours each. For most people, there are two days a year
+when they aren't: the switch to and from summer time throws this off.
+A solution to this issue is offered by Russ Allbery.
+
+ sub yesterday {
+ my $now = defined $_[0] ? $_[0] : time;
+ my $then = $now - 60 * 60 * 24;
+ my $ndst = (localtime $now)[8] > 0;
+ my $tdst = (localtime $then)[8] > 0;
+ $then - ($tdst - $ndst) * 60 * 60;
+ }
+ # Should give you "this time yesterday" in seconds since epoch relative to
+ # the first argument or the current time if no argument is given and
+ # suitable for passing to localtime or whatever else you need to do with
+ # it. $ndst is whether we're currently in daylight savings time; $tdst is
+ # whether the point 24 hours ago was in daylight savings time. If $tdst
+ # and $ndst are the same, a boundary wasn't crossed, and the correction
+ # will subtract 0. If $tdst is 1 and $ndst is 0, subtract an hour more
+ # from yesterday's time since we gained an extra hour while going off
+ # daylight savings time. If $tdst is 0 and $ndst is 1, subtract a
+ # negative hour (add an hour) to yesterday's time since we lost an hour.
+ #
+ # All of this is because during those days when one switches off or onto
+ # DST, a "day" isn't 24 hours long; it's either 23 or 25.
+ #
+ # The explicit settings of $ndst and $tdst are necessary because localtime
+ # only says it returns the system tm struct, and the system tm struct at
+ # least on Solaris doesn't guarantee any particuliar positive value (like,
+ # say, 1) for isdst, just a positive value. And that value can
+ # potentially be negative, if DST information isn't available (this sub
+ # just treats those cases like no DST).
+ #
+ # Note that between 2am and 3am on the day after the time zone switches
+ # off daylight savings time, the exact hour of "yesterday" corresponding
+ # to the current hour is not clearly defined. Note also that if used
+ # between 2am and 3am the day after the change to daylight savings time,
+ # the result will be between 3am and 4am of the previous day; it's
+ # arguable whether this is correct.
+ #
+ # This sub does not attempt to deal with leap seconds (most things don't).
+ #
+ # Copyright relinquished 1999 by Russ Allbery <rra@stanford.edu>
+ # This code is in the public domain
+
+=head2 Does Perl have a year 2000 problem? Is Perl Y2K compliant?
+
+Short answer: No, Perl does not have a Year 2000 problem. Yes, Perl is
+Y2K compliant (whatever that means). The programmers you've hired to
+use it, however, probably are not.
+
+Long answer: The question belies a true understanding of the issue.
+Perl is just as Y2K compliant as your pencil--no more, and no less.
+Can you use your pencil to write a non-Y2K-compliant memo? Of course
+you can. Is that the pencil's fault? Of course it isn't.
+
+The date and time functions supplied with perl (gmtime and localtime)
+supply adequate information to determine the year well beyond 2000
+(2038 is when trouble strikes for 32-bit machines). The year returned
+by these functions when used in an array context is the year minus 1900.
+For years between 1910 and 1999 this I<happens> to be a 2-digit decimal
+number. To avoid the year 2000 problem simply do not treat the year as
+a 2-digit number. It isn't.
+
+When gmtime() and localtime() are used in scalar context they return
a timestamp string that contains a fully-expanded year. For example,
C<$timestamp = gmtime(1005613200)> sets $timestamp to "Tue Nov 13 01:00:00
2001". There's no year 2000 problem here.
+That doesn't mean that Perl can't be used to create non-Y2K compliant
+programs. It can. But so can your pencil. It's the fault of the user,
+not the language. At the risk of inflaming the NRA: ``Perl doesn't
+break Y2K, people do.'' See http://language.perl.com/news/y2k.html for
+a longer exposition.
+
=head1 Data: Strings
=head2 How do I validate input?
The answer to this question is usually a regular expression, perhaps
-with auxiliary logic. See the more specific questions (numbers, email
+with auxiliary logic. See the more specific questions (numbers, mail
addresses, etc.) for details.
=head2 How do I unescape a string?
-It depends just what you mean by "escape". URL escapes are dealt with
-in L<perlfaq9>. Shell escapes with the backslash (\)
+It depends just what you mean by ``escape''. URL escapes are dealt
+with in L<perlfaq9>. Shell escapes with the backslash (C<\>)
character are removed with:
s/\\(.)/$1/g;
-Note that this won't expand \n or \t or any other special escapes.
+This won't expand C<"\n"> or C<"\t"> or any other special escapes.
=head2 How do I remove consecutive pairs of characters?
-To turn "abbcccd" into "abccd":
+To turn C<"abbcccd"> into C<"abccd">:
+
+ s/(.)\1/$1/g; # add /s to include newlines
- s/(.)\1/$1/g;
+Here's a solution that turns "abbcccd" to "abcd":
+
+ y///cs; # y == tr, but shorter :-)
=head2 How do I expand function calls in a string?
This is documented in L<perlref>. In general, this is fraught with
quoting and readability problems, but it is possible. To interpolate
-a subroutine call (in a list context) into a string:
+a subroutine call (in list context) into a string:
print "My sub returned @{[mysub(1,2,3)]} that time.\n";
print "That yields ${\($n + 5)} widgets\n";
-See also "How can I expand variables in text strings?" in this section
-of the FAQ.
+Version 5.004 of Perl had a bug that gave list context to the
+expression in C<${...}>, but this is fixed in version 5.005.
+
+See also ``How can I expand variables in text strings?'' in this
+section of the FAQ.
=head2 How do I find matching/nesting anything?
-This isn't something that can be tackled in one regular expression, no
-matter how complicated. To find something between two single characters,
-a pattern like C</x([^x]*)x/> will get the intervening bits in $1. For
-multiple ones, then something more like C</alpha(.*?)omega/> would
-be needed. But none of these deals with nested patterns, nor can they.
-For that you'll have to write a parser.
+This isn't something that can be done in one regular expression, no
+matter how complicated. To find something between two single
+characters, a pattern like C</x([^x]*)x/> will get the intervening
+bits in $1. For multiple ones, then something more like
+C</alpha(.*?)omega/> would be needed. But none of these deals with
+nested patterns, nor can they. For that you'll have to write a
+parser.
+
+If you are serious about writing a parser, there are a number of
+modules or oddities that will make your life a lot easier. There is
+the CPAN module Parse::RecDescent, the standard module Text::Balanced,
+the byacc program, the CPAN module Parse::Yapp, and Mark-Jason
+Dominus's excellent I<py> tool at http://www.plover.com/~mjd/perl/py/
+.
+
+One simple destructive, inside-out approach that you might try is to
+pull out the smallest nesting parts one at a time:
+
+ while (s/BEGIN((?:(?!BEGIN)(?!END).)*)END//gs) {
+ # do something with $1
+ }
+
+A more complicated and sneaky approach is to make Perl's regular
+expression engine do it for you. This is courtesy Dean Inada, and
+rather has the nature of an Obfuscated Perl Contest entry, but it
+really does work:
+
+ # $_ contains the string to parse
+ # BEGIN and END are the opening and closing markers for the
+ # nested text.
+
+ @( = ('(','');
+ @) = (')','');
+ ($re=$_)=~s/((BEGIN)|(END)|.)/$)[!$3]\Q$1\E$([!$2]/gs;
+ @$ = (eval{/$re/},$@!~/unmatched/);
+ print join("\n",@$[0..$#$]) if( $$[-1] );
=head2 How do I reverse a string?
-Use reverse() in a scalar context, as documented in
+Use reverse() in scalar context, as documented in
L<perlfunc/reverse>.
$reversed = reverse $string;
=head2 How do I expand tabs in a string?
-You can do it the old-fashioned way:
+You can do it yourself:
1 while $string =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e;
use Text::Wrap;
print wrap("\t", ' ', @paragraphs);
-The paragraphs you give to Text::Wrap may not contain embedded
+The paragraphs you give to Text::Wrap should not contain embedded
newlines. Text::Wrap doesn't justify the lines (flush-right).
=head2 How can I access/change the first N letters of a string?
There are many ways. If you just want to grab a copy, use
-substr:
+substr():
$first_byte = substr($a, 0, 1);
substr($a, 0, 3) = "Tom";
-Although those with a regexp kind of thought process will likely prefer
+Although those with a pattern matching kind of thought process will
+likely prefer:
$a =~ s/^.../Tom/;
=head2 How do I change the Nth occurrence of something?
-You have to keep track. For example, let's say you want
-to change the fifth occurrence of "whoever" or "whomever"
-into "whosoever" or "whomsoever", case insensitively.
+You have to keep track of N yourself. For example, let's say you want
+to change the fifth occurrence of C<"whoever"> or C<"whomever"> into
+C<"whosoever"> or C<"whomsoever">, case insensitively. These
+all assume that $_ contains the string to be altered.
$count = 0;
s{((whom?)ever)}{
++$count == 5 # is it the 5th?
? "${2}soever" # yes, swap
: $1 # renege and leave it there
- }igex;
+ }ige;
+
+In the more general case, you can use the C</g> modifier in a C<while>
+loop, keeping count of matches.
+
+ $WANT = 3;
+ $count = 0;
+ $_ = "One fish two fish red fish blue fish";
+ while (/(\w+)\s+fish\b/gi) {
+ if (++$count == $WANT) {
+ print "The third fish is a $1 one.\n";
+ }
+ }
+
+That prints out: C<"The third fish is a red one."> You can also use a
+repetition count and repeated pattern like this:
+
+ /(?:\w+\s+fish\s+){2}(\w+)\s+fish/i;
=head2 How can I count the number of occurrences of a substring within a string?
count of a certain single character (X) within a string, you can use the
C<tr///> function like so:
- $string = "ThisXlineXhasXsomeXx'sXinXit":
+ $string = "ThisXlineXhasXsomeXx'sXinXit";
$count = ($string =~ tr/X//);
- print "There are $count X charcters in the string";
+ print "There are $count X characters in the string";
This is fine if you are just looking for a single character. However,
if you are trying to count multiple character substrings within a
This has the strange effect of turning "C<don't do it>" into "C<Don'T
Do It>". Sometimes you might want this, instead (Suggested by Brian
-Foy E<lt>comdog@computerdog.comE<gt>):
+Foy):
$string =~ s/ (
(^\w) #at the beginning of the line
$line =~ s/(\w+)/\u\L$1/g;
+You can (and probably should) enable locale awareness of those
+characters by placing a C<use locale> pragma in your program.
+See L<perllocale> for endless details on locales.
+
+This is sometimes referred to as putting something into "title
+case", but that's not quite accurate. Consider the proper
+capitalization of the movie I<Dr. Strangelove or: How I Learned to
+Stop Worrying and Love the Bomb>, for example.
+
=head2 How can I split a [character] delimited string except when inside
[character]? (Comma-separated files)
use Text::ParseWords;
@new = quotewords(",", 0, $text);
+There's also a Text::CSV module on CPAN.
+
=head2 How do I strip blank space from the beginning/end of a string?
-The simplest approach, albeit not the fastest, is probably like this:
+Although the simplest approach would seem to be:
$string =~ s/^\s*(.*?)\s*$/$1/;
-It would be faster to do this in two steps:
+Not only is this unnecessarily slow and destructive, it also fails with
+embedded newlines. It is much faster to do this operation in two steps:
$string =~ s/^\s+//;
$string =~ s/\s+$//;
s/\s+$//;
}
+This idiom takes advantage of the C<foreach> loop's aliasing
+behavior to factor out common code. You can do this
+on several strings at once, or arrays, or even the
+values of a hash if you use a slice:
+
+ # trim whitespace in the scalar, the array,
+ # and all the values in the hash
+ foreach ($scalar, @array, @hash{keys %hash}) {
+ s/^\s+//;
+ s/\s+$//;
+ }
+
+=head2 How do I pad a string with blanks or pad a number with zeroes?
+
+(This answer contributed by Uri Guttman, with kibitzing from
+Bart Lateur.)
+
+In the following examples, C<$pad_len> is the length to which you wish
+to pad the string, C<$text> or C<$num> contains the string to be padded,
+and C<$pad_char> contains the padding character. You can use a single
+character string constant instead of the C<$pad_char> variable if you
+know what it is in advance. And in the same way you can use an integer in
+place of C<$pad_len> if you know the pad length in advance.
+
+The simplest method uses the C<sprintf> function. It can pad on the left
+or right with blanks and on the left with zeroes and it will not
+truncate the result. The C<pack> function can only pad strings on the
+right with blanks and it will truncate the result to a maximum length of
+C<$pad_len>.
+
+ # Left padding a string with blanks (no truncation):
+ $padded = sprintf("%${pad_len}s", $text);
+
+ # Right padding a string with blanks (no truncation):
+ $padded = sprintf("%-${pad_len}s", $text);
+
+ # Left padding a number with 0 (no truncation):
+ $padded = sprintf("%0${pad_len}d", $num);
+
+ # Right padding a string with blanks using pack (will truncate):
+ $padded = pack("A$pad_len",$text);
+
+If you need to pad with a character other than blank or zero you can use
+one of the following methods. They all generate a pad string with the
+C<x> operator and combine that with C<$text>. These methods do
+not truncate C<$text>.
+
+Left and right padding with any character, creating a new string:
+
+ $padded = $pad_char x ( $pad_len - length( $text ) ) . $text;
+ $padded = $text . $pad_char x ( $pad_len - length( $text ) );
+
+Left and right padding with any character, modifying C<$text> directly:
+
+ substr( $text, 0, 0 ) = $pad_char x ( $pad_len - length( $text ) );
+ $text .= $pad_char x ( $pad_len - length( $text ) );
+
=head2 How do I extract selected columns from a string?
Use substr() or unpack(), both documented in L<perlfunc>.
+If you prefer thinking in terms of columns instead of widths,
+you can use this kind of thing:
+
+ # determine the unpack format needed to split Linux ps output
+ # arguments are cut columns
+ my $fmt = cut2fmt(8, 14, 20, 26, 30, 34, 41, 47, 59, 63, 67, 72);
+
+ sub cut2fmt {
+ my(@positions) = @_;
+ my $template = '';
+ my $lastpos = 1;
+ for my $place (@positions) {
+ $template .= "A" . ($place - $lastpos) . " ";
+ $lastpos = $place;
+ }
+ $template .= "A*";
+ return $template;
+ }
=head2 How do I find the soundex value of a string?
Use the standard Text::Soundex module distributed with perl.
+But before you do so, you may want to determine whether `soundex' is in
+fact what you think it is. Knuth's soundex algorithm compresses words
+into a small space, and so it does not necessarily distinguish between
+two words which you might want to appear separately. For example, the
+last names `Knuth' and `Kant' are both mapped to the soundex code K530.
+If Text::Soundex does not do what you are looking for, you might want
+to consider the String::Approx module available at CPAN.
=head2 How can I expand variables in text strings?
Let's assume that you have a string like:
$text = 'this has a $foo in it and a $bar';
- $text =~ s/\$(\w+)/${$1}/g;
-Before version 5 of perl, this had to be done with a double-eval
-substitution:
+If those were both global variables, then this would
+suffice:
+
+ $text =~ s/\$(\w+)/${$1}/g; # no /e needed
+
+But since they are probably lexicals, or at least, they could
+be, you'd have to do this:
$text =~ s/(\$\w+)/$1/eeg;
+ die if $@; # needed /ee, not /e
-Which is bizarre enough that you'll probably actually need an EEG
-afterwards. :-)
+It's probably better in the general case to treat those
+variables as entries in some special hash. For example:
-See also "How do I expand function calls in a string?" in this section
+ %user_defs = (
+ foo => 23,
+ bar => 19,
+ );
+ $text =~ s/\$(\w+)/$user_defs{$1}/g;
+
+See also ``How do I expand function calls in a string?'' in this section
of the FAQ.
=head2 What's wrong with always quoting "$vars"?
The problem is that those double-quotes force stringification,
coercing numbers and references into strings, even when you
-don't want them to be.
+don't want them to be. Think of it this way: double-quote
+expansion is used to produce new strings. If you already
+have a string, why do you need more?
If you get used to writing odd things like these:
number, such as the magical C<++> autoincrement operator or the
syscall() function.
-=head2 Why don't my <<HERE documents work?
+Stringification also destroys arrays.
+
+ @lines = `command`;
+ print "@lines"; # WRONG - extra blanks
+ print @lines; # right
+
+=head2 Why don't my E<lt>E<lt>HERE documents work?
Check for these three things:
=back
+If you want to indent the text in the here document, you
+can do this:
+
+ # all in one
+ ($VAR = <<HERE_TARGET) =~ s/^\s+//gm;
+ your text
+ goes here
+ HERE_TARGET
+
+But the HERE_TARGET must still be flush against the margin.
+If you want that indented also, you'll have to quote
+in the indentation.
+
+ ($quote = <<' FINIS') =~ s/^\s+//gm;
+ ...we will have peace, when you and all your works have
+ perished--and the works of your dark master to whom you
+ would deliver us. You are a liar, Saruman, and a corrupter
+ of men's hearts. --Theoden in /usr/src/perl/taint.c
+ FINIS
+ $quote =~ s/\s*--/\n--/;
+
+A nice general-purpose fixer-upper function for indented here documents
+follows. It expects to be called with a here document as its argument.
+It looks to see whether each line begins with a common substring, and
+if so, strips that off. Otherwise, it takes the amount of leading
+white space found on the first line and removes that much off each
+subsequent line.
+
+ sub fix {
+ local $_ = shift;
+ my ($white, $leader); # common white space and common leading string
+ if (/^\s*(?:([^\w\s]+)(\s*).*\n)(?:\s*\1\2?.*\n)+$/) {
+ ($white, $leader) = ($2, quotemeta($1));
+ } else {
+ ($white, $leader) = (/^(\s+)/, '');
+ }
+ s/^\s*?$leader(?:$white)?//gm;
+ return $_;
+ }
+
+This works with leading special strings, dynamically determined:
+
+ $remember_the_main = fix<<' MAIN_INTERPRETER_LOOP';
+ @@@ int
+ @@@ runops() {
+ @@@ SAVEI32(runlevel);
+ @@@ runlevel++;
+ @@@ while ( op = (*op->op_ppaddr)() );
+ @@@ TAINT_NOT;
+ @@@ return 0;
+ @@@ }
+ MAIN_INTERPRETER_LOOP
+
+Or with a fixed amount of leading white space, with remaining
+indentation correctly preserved:
+
+ $poem = fix<<EVER_ON_AND_ON;
+ Now far ahead the Road has gone,
+ And I must follow, if I can,
+ Pursuing it with eager feet,
+ Until it joins some larger way
+ Where many paths and errands meet.
+ And whither then? I cannot say.
+ --Bilbo in /usr/src/perl/pp_ctl.c
+ EVER_ON_AND_ON
+
=head1 Data: Arrays
+=head2 What is the difference between a list and an array?
+
+An array has a changeable length. A list does not. An array is something
+you can push or pop, while a list is a set of values. Some people make
+the distinction that a list is a value while an array is a variable.
+Subroutines are passed and return lists, you put things into list
+context, you initialize arrays with lists, and you foreach() across
+a list. C<@> variables are arrays, anonymous arrays are arrays, arrays
+in scalar context behave like the number of elements in them, subroutines
+access their arguments through the array C<@_>, push/pop/shift only work
+on arrays.
+
+As a side note, there's no such thing as a list in scalar context.
+When you say
+
+ $scalar = (2, 5, 7, 9);
+
+you're using the comma operator in scalar context, so it uses the scalar
+comma operator. There never was a list there at all! This causes the
+last value to be returned: 9.
+
=head2 What is the difference between $array[1] and @array[1]?
The former is a scalar value, the latter an array slice, which makes
The B<-w> flag will warn you about these matters.
-=head2 How can I extract just the unique elements of an array?
+=head2 How can I remove duplicate elements from a list or array?
There are several possible ways, depending on whether the array is
ordered and whether you wish to preserve the ordering.
=over 4
=item a) If @in is sorted, and you want @out to be sorted:
+(this assumes all true values in the array)
$prev = 'nonesuch';
@out = grep($_ ne $prev && ($prev = $_), @in);
-This is nice in that it doesn't use much extra memory,
-simulating uniq(1)'s behavior of removing only adjacent
-duplicates.
+This is nice in that it doesn't use much extra memory, simulating
+uniq(1)'s behavior of removing only adjacent duplicates. It's less
+nice in that it won't work with false values like undef, 0, or "";
+"0 but true" is ok, though.
=item b) If you don't know whether @in is sorted:
=back
-=head2 How can I tell whether an array contains a certain element?
+But perhaps you should have been using a hash all along, eh?
+
+=head2 How can I tell whether a list or array contains a certain element?
-There are several ways to approach this. If you are going to make
-this query many times and the values are arbitrary strings, the
-fastest way is probably to invert the original array and keep an
+Hearing the word "in" is an I<in>dication that you probably should have
+used a hash, not a list or array, to store your data. Hashes are
+designed to answer this question quickly and efficiently. Arrays aren't.
+
+That being said, there are several ways to approach this. If you
+are going to make this query many times over arbitrary string values,
+the fastest way is probably to invert the original array and keep an
associative array lying about whose keys are the first array's values.
@blues = qw/azure cerulean teal turquoise lapis-lazuli/;
@primes = (2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31);
undef @is_tiny_prime;
- for (@primes) { $is_tiny_prime[$_] = 1; }
+ for (@primes) { $is_tiny_prime[$_] = 1 }
+ # or simply @istiny_prime[@primes] = (1) x @primes;
Now you check whether $is_tiny_prime[$some_number].
@articles = ( 1..10, 150..2000, 2017 );
undef $read;
- grep (vec($read,$_,1) = 1, @articles);
+ for (@articles) { vec($read,$_,1) = 1 }
Now check whether C<vec($read,$n,1)> is true for some C<$n>.
These are slow (checks every element even if the first matches),
inefficient (same reason), and potentially buggy (what if there are
-regexp characters in $whatever?).
+regex characters in $whatever?). If you're only testing once, then
+use:
+
+ $is_there = 0;
+ foreach $elt (@array) {
+ if ($elt eq $elt_to_find) {
+ $is_there = 1;
+ last;
+ }
+ }
+ if ($is_there) { ... }
=head2 How do I compute the difference of two arrays? How do I compute the intersection of two arrays?
push @{ $count{$element} > 1 ? \@intersection : \@difference }, $element;
}
+Note that this is the I<symmetric difference>, that is, all elements in
+either A or in B, but not in both. Think of it as an xor operation.
+
+=head2 How do I test whether two arrays or hashes are equal?
+
+The following code works for single-level arrays. It uses a stringwise
+comparison, and does not distinguish defined versus undefined empty
+strings. Modify if you have other needs.
+
+ $are_equal = compare_arrays(\@frogs, \@toads);
+
+ sub compare_arrays {
+ my ($first, $second) = @_;
+ local $^W = 0; # silence spurious -w undef complaints
+ return 0 unless @$first == @$second;
+ for (my $i = 0; $i < @$first; $i++) {
+ return 0 if $first->[$i] ne $second->[$i];
+ }
+ return 1;
+ }
+
+For multilevel structures, you may wish to use an approach more
+like this one. It uses the CPAN module FreezeThaw:
+
+ use FreezeThaw qw(cmpStr);
+ @a = @b = ( "this", "that", [ "more", "stuff" ] );
+
+ printf "a and b contain %s arrays\n",
+ cmpStr(\@a, \@b) == 0
+ ? "the same"
+ : "different";
+
+This approach also works for comparing hashes. Here
+we'll demonstrate two different answers:
+
+ use FreezeThaw qw(cmpStr cmpStrHard);
+
+ %a = %b = ( "this" => "that", "extra" => [ "more", "stuff" ] );
+ $a{EXTRA} = \%b;
+ $b{EXTRA} = \%a;
+
+ printf "a and b contain %s hashes\n",
+ cmpStr(\%a, \%b) == 0 ? "the same" : "different";
+
+ printf "a and b contain %s hashes\n",
+ cmpStrHard(\%a, \%b) == 0 ? "the same" : "different";
+
+
+The first reports that both those the hashes contain the same data,
+while the second reports that they do not. Which you prefer is left as
+an exercise to the reader.
+
=head2 How do I find the first array element for which a condition is true?
You can use this if you care about the index:
- for ($i=0; $i < @array; $i++) {
+ for ($i= 0; $i < @array; $i++) {
if ($array[$i] eq "Waldo") {
$found_index = $i;
last;
In general, you usually don't need a linked list in Perl, since with
regular arrays, you can push and pop or shift and unshift at either end,
-or you can use splice to add and/or remove arbitrary number of elements
-at arbitrary points.
+or you can use splice to add and/or remove arbitrary number of elements at
+arbitrary points. Both pop and shift are both O(1) operations on perl's
+dynamic arrays. In the absence of shifts and pops, push in general
+needs to reallocate on the order every log(N) times, and unshift will
+need to copy pointers each time.
If you really, really wanted, you could use structures as described in
L<perldsc> or L<perltoot> and do just what the algorithm book tells you
-to do.
+to do. For example, imagine a list node like this:
+
+ $node = {
+ VALUE => 42,
+ LINK => undef,
+ };
+
+You could walk the list this way:
+
+ print "List: ";
+ for ($node = $head; $node; $node = $node->{LINK}) {
+ print $node->{VALUE}, " ";
+ }
+ print "\n";
+
+You could grow the list this way:
+
+ my ($head, $tail);
+ $tail = append($head, 1); # grow a new head
+ for $value ( 2 .. 10 ) {
+ $tail = append($tail, $value);
+ }
+
+ sub append {
+ my($list, $value) = @_;
+ my $node = { VALUE => $value };
+ if ($list) {
+ $node->{LINK} = $list->{LINK};
+ $list->{LINK} = $node;
+ } else {
+ $_[0] = $node; # replace caller's version
+ }
+ return $node;
+ }
+
+But again, Perl's built-in are virtually always good enough.
=head2 How do I handle circular lists?
=head2 How do I shuffle an array randomly?
-Here's a shuffling algorithm which works its way through the list,
+Use this:
+
+ # fisher_yates_shuffle( \@array ) :
+ # generate a random permutation of @array in place
+ sub fisher_yates_shuffle {
+ my $array = shift;
+ my $i;
+ for ($i = @$array; --$i; ) {
+ my $j = int rand ($i+1);
+ next if $i == $j;
+ @$array[$i,$j] = @$array[$j,$i];
+ }
+ }
+
+ fisher_yates_shuffle( \@array ); # permutes @array in place
+
+You've probably seen shuffling algorithms that work using splice,
randomly picking another element to swap the current element with:
srand;
push(@new, splice(@old, rand @old, 1));
}
-For large arrays, this avoids a lot of the reshuffling:
-
- srand;
- @new = ();
- @old = 1 .. 10000; # just a demo
- for( @old ){
- my $r = rand @new+1;
- push(@new,$new[$r]);
- $new[$r] = $_;
- }
+This is bad because splice is already O(N), and since you do it N times,
+you just invented a quadratic algorithm; that is, O(N**2). This does
+not scale, although Perl is so efficient that you probably won't notice
+this until you have rather largish arrays.
=head2 How do I process/modify each element of an array?
Use C<for>/C<foreach>:
for (@lines) {
- s/foo/bar/;
- tr[a-z][A-Z];
+ s/foo/bar/; # change that word
+ y/XZ/ZX/; # swap those letters
}
Here's another; let's compute spherical volumes:
- for (@radii) {
+ for (@volumes = @radii) { # @volumes has changed parts
$_ **= 3;
$_ *= (4/3) * 3.14159; # this will be constant folded
}
+If you want to do the same thing to modify the values of the hash,
+you may not use the C<values> function, oddly enough. You need a slice:
+
+ for $orbit ( @orbits{keys %orbits} ) {
+ ($orbit **= 3) *= (4/3) * 3.14159;
+ }
+
=head2 How do I select a random element from an array?
Use the rand() function (see L<perlfunc/rand>):
+ # at the top of the program:
srand; # not needed for 5.004 and later
+
+ # then later on
$index = rand @array;
$element = $array[$index];
+Make sure you I<only call srand once per program, if then>.
+If you are calling it more than once (such as before each
+call to rand), you're almost certainly doing something wrong.
+
=head2 How do I permute N elements of a list?
Here's a little program that generates all permutations
of all the words on each line of input. The algorithm embodied
-in the permut() function should work on any list:
+in the permute() function should work on any list:
#!/usr/bin/perl -n
- # permute - tchrist@perl.com
- permut([split], []);
- sub permut {
- my @head = @{ $_[0] };
- my @tail = @{ $_[1] };
- unless (@head) {
- # stop recursing when there are no elements in the head
- print "@tail\n";
+ # tsc-permute: permute each word of input
+ permute([split], []);
+ sub permute {
+ my @items = @{ $_[0] };
+ my @perms = @{ $_[1] };
+ unless (@items) {
+ print "@perms\n";
} else {
- # for all elements in @head, move one from @head to @tail
- # and call permut() on the new @head and @tail
- my(@newhead,@newtail,$i);
- foreach $i (0 .. $#head) {
- @newhead = @head;
- @newtail = @tail;
- unshift(@newtail, splice(@newhead, $i, 1));
- permut([@newhead], [@newtail]);
+ my(@newitems,@newperms,$i);
+ foreach $i (0 .. $#items) {
+ @newitems = @items;
+ @newperms = @perms;
+ unshift(@newperms, splice(@newitems, $i, 1));
+ permute([@newitems], [@newperms]);
}
}
}
@sorted = map { $_->[0] }
sort { $a->[1] cmp $b->[1] }
- map { [ $_, uc((/\d+\s*(\S+)/ )[0] ] } @data;
+ map { [ $_, uc( (/\d+\s*(\S+)/)[0]) ] } @data;
If you need to sort on several fields, the following paradigm is useful.
This method gets faster the more sparse the bit vector is.
(Courtesy of Tim Bunce and Winfried Koenig.)
+Here's a demo on how to use vec():
+
+ # vec demo
+ $vector = "\xff\x0f\xef\xfe";
+ print "Ilya's string \\xff\\x0f\\xef\\xfe represents the number ",
+ unpack("N", $vector), "\n";
+ $is_set = vec($vector, 23, 1);
+ print "Its 23rd bit is ", $is_set ? "set" : "clear", ".\n";
+ pvec($vector);
+
+ set_vec(1,1,1);
+ set_vec(3,1,1);
+ set_vec(23,1,1);
+
+ set_vec(3,1,3);
+ set_vec(3,2,3);
+ set_vec(3,4,3);
+ set_vec(3,4,7);
+ set_vec(3,8,3);
+ set_vec(3,8,7);
+
+ set_vec(0,32,17);
+ set_vec(1,32,17);
+
+ sub set_vec {
+ my ($offset, $width, $value) = @_;
+ my $vector = '';
+ vec($vector, $offset, $width) = $value;
+ print "offset=$offset width=$width value=$value\n";
+ pvec($vector);
+ }
+
+ sub pvec {
+ my $vector = shift;
+ my $bits = unpack("b*", $vector);
+ my $i = 0;
+ my $BASE = 8;
+
+ print "vector length in bytes: ", length($vector), "\n";
+ @bytes = unpack("A8" x length($vector), $bits);
+ print "bits are: @bytes\n\n";
+ }
+
=head2 Why does defined() return true on empty arrays and hashes?
-See L<perlfunc/defined> in the 5.004 release or later of Perl.
+The short story is that you should probably only use defined on scalars or
+functions, not on aggregates (arrays and hashes). See L<perlfunc/defined>
+in the 5.004 release or later of Perl for more detail.
=head1 Data: Hashes (Associative Arrays)
Use the each() function (see L<perlfunc/each>) if you don't care
whether it's sorted:
- while (($key,$value) = each %hash) {
+ while ( ($key, $value) = each %hash) {
print "$key = $value\n";
}
=head2 What happens if I add or remove keys from a hash while iterating over it?
-Don't do that.
+Don't do that. :-)
+
+[lwall] In Perl 4, you were not allowed to modify a hash at all while
+interating over it. In Perl 5 you can delete from it, but you still
+can't add to it, because that might cause a doubling of the hash table,
+in which half the entries get copied up to the new top half of the
+table, at which point you've totally bamboozled the interator code.
+Even if the table doesn't double, there's no telling whether your new
+entry will be inserted before or after the current iterator position.
+
+Either treasure up your changes and make them after the iterator finishes,
+or use keys to fetch all the old keys at once, and iterate over the list
+of keys.
=head2 How do I look up a hash element by value?
$by_value{$value} = $key;
}
-If your hash could have repeated values, the methods above will only
-find one of the associated keys. This may or may not worry you.
+If your hash could have repeated values, the methods above will only find
+one of the associated keys. This may or may not worry you. If it does
+worry you, you can always reverse the hash into a hash of arrays instead:
+
+ while (($key, $value) = each %by_key) {
+ push @{$key_list_by_value{$value}}, $key;
+ }
=head2 How can I know how many entries are in a hash?
$num_keys = scalar keys %hash;
-In void context it just resets the iterator, which is faster
-for tied hashes.
+In void context, the keys() function just resets the iterator, which is
+faster for tied hashes than would be iterating through the whole
+hash, one key-value pair at a time.
=head2 How do I sort a hash (optionally by value instead of key)?
You can look into using the DB_File module and tie() using the
$DB_BTREE hash bindings as documented in L<DB_File/"In Memory Databases">.
+The Tie::IxHash module from CPAN might also be instructive.
=head2 What's the difference between "delete" and "undef" with hashes?
=head2 How do I reset an each() operation part-way through?
-Using C<keys %hash> in a scalar context returns the number of keys in
+Using C<keys %hash> in scalar context returns the number of keys in
the hash I<and> resets the iterator associated with the hash. You may
need to do this if you use C<last> to exit a loop early so that when you
re-enter it, the hash iterator has been reset.
=head2 How can I get the unique keys from two hashes?
-First you extract the keys from the hashes into arrays, and then solve
-the uniquifying the array problem described above. For example:
+First you extract the keys from the hashes into lists, then solve
+the "removing duplicates" problem described above. For example:
%seen = ();
for $element (keys(%foo), keys(%bar)) {
=head2 How can I make the Perl equivalent of a C structure/C++ class/hash or array of hashes or arrays?
-Use references (documented in L<perlref>). Examples of complex data
-structures are given in L<perldsc> and L<perllol>. Examples of
-structures and object-oriented classes are in L<perltoot>.
+Usually a hash ref, perhaps like this:
+
+ $record = {
+ NAME => "Jason",
+ EMPNO => 132,
+ TITLE => "deputy peon",
+ AGE => 23,
+ SALARY => 37_000,
+ PALS => [ "Norbert", "Rhys", "Phineas"],
+ };
+
+References are documented in L<perlref> and the upcoming L<perlreftut>.
+Examples of complex data structures are given in L<perldsc> and
+L<perllol>. Examples of structures and object-oriented classes are
+in L<perltoot>.
=head2 How can I use a reference as a hash key?
print "Your kernel is GNU-zip enabled!\n";
}
-On some systems, however, you have to play tedious games with "text"
-versus "binary" files. See L<perlfunc/"binmode">.
+On less elegant (read: Byzantine) systems, however, you have
+to play tedious games with "text" versus "binary" files. See
+L<perlfunc/"binmode"> or L<perlopentut>. Most of these ancient-thinking
+systems are curses out of Microsoft, who seem to be committed to putting
+the backward into backward compatibility.
If you're concerned about 8-bit ASCII data, then see L<perllocale>.
Assuming that you don't care about IEEE notations like "NaN" or
"Infinity", you probably just want to use a regular expression.
- warn "has nondigits" if /\D/;
- warn "not a whole number" unless /^\d+$/;
- warn "not an integer" unless /^-?\d+$/; # reject +3
- warn "not an integer" unless /^[+-]?\d+$/;
- warn "not a decimal number" unless /^-?\d+\.?\d*$/; # rejects .2
- warn "not a decimal number" unless /^-?(?:\d+(?:\.\d*)?|\.\d+)$/;
- warn "not a C float"
- unless /^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/;
+ if (/\D/) { print "has nondigits\n" }
+ if (/^\d+$/) { print "is a whole number\n" }
+ if (/^-?\d+$/) { print "is an integer\n" }
+ if (/^[+-]?\d+$/) { print "is a +/- integer\n" }
+ if (/^-?\d+\.?\d*$/) { print "is a real number\n" }
+ if (/^-?(?:\d+(?:\.\d*)?|\.\d+)$/) { print "is a decimal number" }
+ if (/^([+-]?)(?=\d|\.\d)\d*(\.\d*)?([Ee]([+-]?\d+))?$/)
+ { print "a C float" }
+
+If you're on a POSIX system, Perl's supports the C<POSIX::strtod>
+function. Its semantics are somewhat cumbersome, so here's a C<getnum>
+wrapper function for more convenient access. This function takes
+a string and returns the number it found, or C<undef> for input that
+isn't a C float. The C<is_numeric> function is a front end to C<getnum>
+if you just want to say, ``Is this a float?''
+
+ sub getnum {
+ use POSIX qw(strtod);
+ my $str = shift;
+ $str =~ s/^\s+//;
+ $str =~ s/\s+$//;
+ $! = 0;
+ my($num, $unparsed) = strtod($str);
+ if (($str eq '') || ($unparsed != 0) || $!) {
+ return undef;
+ } else {
+ return $num;
+ }
+ }
+
+ sub is_numeric { defined &getnum }
Or you could check out
http://www.perl.com/CPAN/modules/by-module/String/String-Scanf-1.1.tar.gz
=head2 How do I keep persistent data across program calls?
For some specific applications, you can use one of the DBM modules.
-See L<AnyDBM_File>. More generically, you should consult the
-FreezeThaw, Storable, or Class::Eroot modules from CPAN.
+See L<AnyDBM_File>. More generically, you should consult the FreezeThaw,
+Storable, or Class::Eroot modules from CPAN. Here's one example using
+Storable's C<store> and C<retrieve> functions:
+
+ use Storable;
+ store(\%hash, "filename");
+
+ # later on...
+ $href = retrieve("filename"); # by ref
+ %hash = %{ retrieve("filename") }; # direct to hash
=head2 How do I print out or copy a recursive data structure?
-The Data::Dumper module on CPAN is nice for printing out
-data structures, and FreezeThaw for copying them. For example:
+The Data::Dumper module on CPAN (or the 5.005 release of Perl) is great
+for printing out data structures. The Storable module, found on CPAN,
+provides a function called C<dclone> that recursively copies its argument.
- use FreezeThaw qw(freeze thaw);
- $new = thaw freeze $old;
+ use Storable qw(dclone);
+ $r2 = dclone($r1);
-Where $old can be (a reference to) any kind of data structure you'd like.
-It will be deeply copied.
+Where $r1 can be a reference to any kind of data structure you'd like.
+It will be deeply copied. Because C<dclone> takes and returns references,
+you'd have to add extra punctuation if you had a hash of arrays that
+you wanted to copy.
+
+ %newhash = %{ dclone(\%oldhash) };
=head2 How do I define methods for every class/object?
Get the Business::CreditCard module from CPAN.
-=head1 AUTHOR AND COPYRIGHT
+=head2 How do I pack arrays of doubles or floats for XS code?
-Copyright (c) 1997 Tom Christiansen and Nathan Torkington.
-All rights reserved. See L<perlfaq> for distribution information.
+The kgbpack.c code in the PGPLOT module on CPAN does just this.
+If you're doing a lot of float or double processing, consider using
+the PDL module from CPAN instead--it makes number-crunching easy.
+
+=head1 AUTHOR AND COPYRIGHT
+Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington.
+All rights reserved.
+
+When included as part of the Standard Version of Perl, or as part of
+its complete documentation whether printed or otherwise, this work
+may be distributed only under the terms of Perl's Artistic License.
+Any distribution of this file or derivatives thereof I<outside>
+of that package require that special arrangements be made with
+copyright holder.
+
+Irrespective of its distribution, all code examples in this file
+are hereby placed into the public domain. You are permitted and
+encouraged to use this code in your own programs for fun
+or for profit as you see fit. A simple comment in the code giving
+credit would be courteous but is not required.
https://perl5.git.perl.org / perl5.git / blobdiff