=head1 SYNOPSIS
These are instructions for building Perl under DOS (or w??), using
-DJGPP v2.01 or later. Under w95 long filenames are supported.
+DJGPP v2.03 or later. Under w95 long filenames are supported.
=head1 DESCRIPTION
is used to build extensions to perl). Therefore, you should be
able to build and install most extensions found in the CPAN sites.
-=head2 Prerequisites
+Detailed instructions on how to build and install perl extension
+modules, including XS-type modules, is included. See 'BUILDING AND
+INSTALLING MODULES'.
+
+=head2 Prerequisites for Compiling Perl on DOS
=over 4
You need the following files to build perl (or add new modules):
- v2/djdev202.zip
- v2/bnu27b.zip
- v2gnu/gcc2721b.zip
- v2gnu/bsh1147b.zip
- v2gnu/mak3761b.zip
- v2gnu/fil316b.zip
- v2gnu/sed118b.zip
- v2gnu/txt122b.zip
- v2gnu/dif271b.zip
- v2gnu/grep21b.zip
- v2gnu/shl112b.zip
- v2gnu/gawk303b.zip
- v2misc/csdpmi4b.zip
+ v2/djdev203.zip
+ v2gnu/bnu2112b.zip
+ v2gnu/gcc2953b.zip
+ v2gnu/bsh204b.zip
+ v2gnu/mak3791b.zip
+ v2gnu/fil40b.zip
+ v2gnu/sed3028b.zip
+ v2gnu/txt20b.zip
+ v2gnu/dif272b.zip
+ v2gnu/grep24b.zip
+ v2gnu/shl20jb.zip
+ v2gnu/gwk306b.zip
+ v2misc/csdpmi5b.zip
or possibly any newer version.
=back
-=head2 Building
+=head2 Building Perl on DOS
=over 4
=item *
-Unpack the source package F<perl5.6*.tar.gz> with djtarx. If you want
+Unpack the source package F<perl5.8*.tar.gz> with djtarx. If you want
to use long file names under w95 and also to get Perl to pass all its
tests, don't forget to use
set LFN=y
- set FNCASE=y
+ set FNCASE=y
before unpacking the archive.
ln -s bash.exe sh.exe
+[If you have the recommended version of bash for DJGPP, this is already
+done for you.]
+
And make the C<SHELL> environment variable point to this F<sh.exe>:
set SHELL=c:/djgpp/bin/sh.exe (use full path name!)
Copy or link F<gecho.exe> to F<echo.exe> if you don't have F<echo.exe>.
Copy or link F<gawk.exe> to F<awk.exe> if you don't have F<awk.exe>.
+[If you have the recommended versions of djdev, shell utilities and
+gawk, all these are already done for you, and you will not need to do
+anything.]
+
=item *
Chdir to the djgpp subdirectory of perl toplevel and type the following
-command:
+commands:
+ set FNCASE=y
configure.bat
This will do some preprocessing then run the Configure script for you.
-The Configure script is interactive, but in most cases you
-just need to press ENTER.
+The Configure script is interactive, but in most cases you just need to
+press ENTER. The "set" command ensures that DJGPP preserves the letter
+case of file names when reading directories. If you already issued this
+set command when unpacking the archive, and you are in the same DOS
+session as when you unpacked the archive, you don't have to issue the
+set command again. This command is necessary *before* you start to
+(re)configure or (re)build perl in order to ensure both that perl builds
+correctly and that building XS-type modules can succeed. See the DJGPP
+info entry for "_preserve_fncase" for more information:
+
+ info libc alphabetical _preserve_fncase
If the script says that your package is incomplete, and asks whether
to continue, just answer with Y (this can only happen if you don't use
-long filenames).
+long filenames or forget to issue "set FNCASE=y" first).
When Configure asks about the extensions, I suggest IO and Fcntl,
and if you want database handling then SDBM_File or GDBM_File
=back
-=head2 Testing
+=head2 Testing Perl on DOS
Type:
conditions (e.g. some subtests fail under linux/dosemu or plain dos
with short filenames only).
-=head2 Installation
+=head2 Installation of Perl on DOS
Type:
and the library goes under C<($DJDIR)/lib/perl5>. The pod documentation
goes under C<($DJDIR)/lib/perl5/pod>.
+=head1 BUILDING AND INSTALLING MODULES ON DOS
+
+=head2 Building Prerequisites for Perl on DOS
+
+For building and installing non-XS modules, all you need is a working
+perl under DJGPP. Non-XS modules do not require re-linking the perl
+binary, and so are simpler to build and install.
+
+XS-type modules do require re-linking the perl binary, because part of
+an XS module is written in "C", and has to be linked together with the
+perl binary to be executed. This is required because perl under DJGPP
+is built with the "static link" option, due to the lack of "dynamic
+linking" in the DJGPP environment.
+
+Because XS modules require re-linking of the perl binary, you need both
+the perl binary distribution and the perl source distribution to build
+an XS extension module. In addition, you will have to have built your
+perl binary from the source distribution so that all of the components
+of the perl binary are available for the required link step.
+
+=head2 Unpacking CPAN Modules on DOS
+
+First, download the module package from CPAN (e.g., the "Comma Separated
+Value" text package, Text-CSV-0.01.tar.gz). Then expand the contents of
+the package into some location on your disk. Most CPAN modules are
+built with an internal directory structure, so it is usually safe to
+expand it in the root of your DJGPP installation. Some people prefer to
+locate source trees under /usr/src (i.e., C<($DJDIR)/usr/src>), but you may
+put it wherever seems most logical to you, *EXCEPT* under the same
+directory as your perl source code. There are special rules that apply
+to modules which live in the perl source tree that do not apply to most
+of the modules in CPAN.
+
+Unlike other DJGPP packages, which are normal "zip" files, most CPAN
+module packages are "gzipped tarballs". Recent versions of WinZip will
+safely unpack and expand them, *UNLESS* they have zero-length files. It
+is a known WinZip bug (as of v7.0) that it will not extract zero-length
+files.
+
+From the command line, you can use the djtar utility provided with DJGPP
+to unpack and expand these files. For example:
+
+ C:\djgpp>djtarx -v Text-CSV-0.01.tar.gz
+
+This will create the new directory C<($DJDIR)/Text-CSV-0.01>, filling
+it with the source for this module.
+
+=head2 Building Non-XS Modules on DOS
+
+To build a non-XS module, you can use the standard module-building
+instructions distributed with perl modules.
+
+ perl Makefile.PL
+ make
+ make test
+ make install
+
+This is sufficient because non-XS modules install only ".pm" files and
+(sometimes) pod and/or man documentation. No re-linking of the perl
+binary is needed to build, install or use non-XS modules.
+
+=head2 Building XS Modules on DOS
+
+To build an XS module, you must use the standard module-building
+instructions distributed with perl modules *PLUS* three extra
+instructions specific to the DJGPP "static link" build environment.
+
+ set FNCASE=y
+ perl Makefile.PL
+ make
+ make perl
+ make test
+ make -f Makefile.aperl inst_perl MAP_TARGET=perl.exe
+ make install
+
+The first extra instruction sets DJGPP's FNCASE environment variable so
+that the new perl binary which you must build for an XS-type module will
+build correctly. The second extra instruction re-builds the perl binary
+in your module directory before you run "make test", so that you are
+testing with the new module code you built with "make". The third extra
+instruction installs the perl binary from your module directory into the
+standard DJGPP binary directory, C<($DJDIR)/bin>, replacing your
+previous perl binary.
+
+Note that the MAP_TARGET value *must* have the ".exe" extension or you
+will not create a "perl.exe" to replace the one in C<($DJDIR)/bin>.
+
+When you are done, the XS-module install process will have added information
+to your "perllocal" information telling that the perl binary has been replaced,
+and what module was installed. You can view this information at any time
+by using the command:
+
+ perl -S perldoc perllocal
+
=head1 AUTHOR
-Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se>
+Laszlo Molnar, F<laszlo.molnar@eth.ericsson.se> [Installing/building perl]
+
+Peter J. Farley III F<pjfarley@banet.net> [Building/installing modules]
=head1 SEE ALSO
https://perl5.git.perl.org / perl5.git / blobdiff