# Note: this Configure script was generated automatically. Rather than
# working with this copy of Configure, you may wish to get metaconfig.
# The dist package (which contains metaconfig) is available via SVN:
-# svn co https://svn.sourceforge.net/svnroot/dist/trunk/dist
+# svn co https://svn.code.sf.net/p/dist/code/trunk/dist
#
# Though this script was generated by metaconfig from metaunits, it is
# OK to send patches against Configure itself. It's up to the Configure
# See Porting/pumpkin.pod for more information on metaconfig.
#
-# Generated on Sat Mar 9 20:33:06 CET 2013 [metaconfig 3.5 PL0]
+# Generated on Mon May 27 09:27:16 CEST 2013 [metaconfig 3.5 PL0]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
is_os2=yes
elif test -n "$DJGPP"; then
case "X${MACHTYPE:-nonesuchmach}" in
- *cygwin) ;;
+ *cygwin|*msys) ;;
*) p_=\; ;;
esac
fi
case "$sh" in
'') cat >&2 <<EOM
-$me: Fatal Error: I can't find a Bourne Shell anywhere.
+$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.org and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
;;
*) issymlink='' ;;
esac
- fi
+ fi
fi
if $test "X$issymlink" = X; then
if $test -L sym 2>/dev/null; then
myuname=`$uname -a 2>/dev/null`
$test -z "$myuname" && myuname=`hostname 2>/dev/null`
# Downcase everything to avoid ambiguity.
-# Remove slashes and single quotes so we can use parts of this in
+# Remove slashes and single quotes so we can use parts of this in
# directory and file names.
# Remove newlines so myuname is sane to use elsewhere.
# tr '[A-Z]' '[a-z]' would not work in EBCDIC
fi
: determine installation prefix for where package is to be installed.
-if $afs; then
+if $afs; then
$cat <<EOM
Since you are running AFS, I need to distinguish the directory in which
esac
# See note above about -fstack-protector
case "$ccflags" in
-*-fstack-protector*)
+*-fstack-protector*)
case "$dflt" in
*-fstack-protector*) ;; # Don't add it again
- *) dflt="$dflt -fstack-protector" ;;
+ *) dflt="$dflt -fstack-protector" ;;
esac
;;
esac
. ./myread
archname="$ans"
-: optionally add api version to the architecture for versioned archlibs
+: optionally add API version to the architecture for versioned archlibs
case "$useversionedarchname" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
[yY]*) fn=d~+
rp='Installation prefix to use for vendor-supplied add-ons?'
case "$vendorprefix" in
- '') dflt='' ;;
+ '') dflt="$prefix" ;;
*) dflt=$vendorprefix ;;
esac
. ./getfile
Lastly, you can have perl look in other directories for extensions and
modules in addition to those already specified.
-These directories will be searched after
- $sitearch
- $sitelib
+These directories will be searched after
+ $sitearch
+ $sitelib
EOM
test X"$vendorlib" != "X" && echo ' ' $vendorlib
test X"$vendorarch" != "X" && echo ' ' $vendorarch
rp='Colon-separated list of additional directories for perl to search?'
. ./myread
case "$ans" in
-' '|''|none) otherlibdirs=' ' ;;
+' '|''|none) otherlibdirs=' ' ;;
*) otherlibdirs="$ans" ;;
esac
case "$otherlibdirs" in
;;
esac
case "$dflt" in
- '')
+ '')
if $test "$osname" = aix -a "X$PASE" != "Xdefine" -a ! -f /lib/syscalls.exp; then
echo " "
echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
+ echo "'nm' won't be sufficient on this system." >&4
dflt=n
fi
;;
;;
linux|irix*|gnu*) dflt="-shared $optimize" ;;
next) dflt='none' ;;
- solaris) dflt='-G' ;;
+ solaris) # See [perl #66604].
+ # On Solaris 11, gcc -m64 on amd64
+ # appears not to understand -G. gcc versions at
+ # least as old as 3.4.3 support -shared, so just
+ # use that with Solaris 11 and later, but keep
+ # the old behavior for older Solaris versions.
+ case "$gccversion" in
+ '') dflt='-G' ;;
+ *) case "$osvers" in
+ 2.?|2.10) dflt='-G' ;;
+ *) dflt='-shared' ;;
+ esac
+ ;;
+ esac
+ ;;
sunos) dflt='-assert nodefinitions' ;;
svr4*|esix*|nonstopux) dflt="-G $ldflags" ;;
*) dflt='none' ;;
: determine where manual pages are on this system
echo " "
case "$sysman" in
-'')
+'')
syspath='/usr/share/man/man1 /usr/man/man1'
syspath="$syspath /usr/man/mann /usr/man/manl /usr/man/local/man1"
syspath="$syspath /usr/man/u_man/man1"
cont=x
while test "$cont"; do
case "$MAILDOMAIN" in
- '') maildomain="$myhostname$mydomain";;
+ '')
+ if $test -s /etc/mailname; then
+ maildomain=`$cat /etc/mailname`
+ else
+ maildomain="$myhostname$mydomain"
+ fi
+ ;;
*) maildomain="$MAILDOMAIN";;
esac
case "$cf_email" in
valstd="$undef"
fi
-: see if varags is available
+: see if varargs is available
echo " "
if $test `./findhdr varargs.h`; then
echo "<varargs.h> found." >&4
#endif
#endif
#endif
-#endif
+#endif
int main() {
DIR *dirp = opendir(".");
if (dirfd(dirp) >= 0)
$rm -f $$.h
;;
*)
- val="$undef";
+ val="$undef";
set d_pwquota; eval $setvar
set d_pwage; eval $setvar
set d_pwchange; eval $setvar
if eval $compile_ok; then
val="$define"
else
- echo "But you don't seem to have a useable struct sigaction." >&4
+ echo "But you don't seem to have a usable struct sigaction." >&4
val="$undef"
fi
else
# Respect a hint (or previous) value for perl_static_inline, if there is one.
case "$perl_static_inline" in
'') # Check the various possibilities, and break out on success.
- # For gcc, prefer __inline__, which will still permit
+ # For gcc, prefer __inline__, which will still permit
# cflags.SH to add in -ansi.
case "$gccversion" in
'') xxx="inline __inline__ __inline _inline";;
echo 'strerror() found.' >&4
d_strerror="$define"
d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(You also have sys_errlist[], so we could roll our own strerror.)"
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(You also have sys_errlist[], so we could roll our own strerror.)"
d_syserrlst="$define"
else
- echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
+ echo "(Since you don't have sys_errlist[], strerror() is welcome.)"
d_syserrlst="$undef"
fi
elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
echo 'strerror() found in string header.' >&4
d_strerror="$define"
d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
d_syserrlst="$define"
else
set ebcdic
eval $setvar
-: length of character in bytes. Is always 1, otherwise it isnt C
+: length of character in bytes. Is always 1, otherwise it is not C
: This used to be a test using sizeof
charsize=1
echo "OK, found random()." >&4
else
dflt="rand"
- echo "Yick, looks like I have to use rand()." >&4
+ echo "Yuck, looks like I have to use rand()." >&4
fi
echo " "
;;
;;
esac
fi
-: check for fflush NULL behaviour
+: check for fflush NULL behavior
case "$fflushNULL" in
'') set try -DTRY_FFLUSH_NULL $output
if eval $compile; then
*-y*) ;;
*)
yacc="$yacc -y"
- echo "(Adding -y option to bison to get yacc-compatible behaviour.)"
+ echo "(Adding -y option to bison to get yacc-compatible behavior.)"
;;
esac
;;
chmod +x Cppsym.try
$eunicefix Cppsym.try
./Cppsym < Cppsym.know | $sort | $uniq > Cppsym.true
-: Add in any linux cpp "predefined macros":
+: Add in any Linux cpp "predefined macros":
case "$osname::$gccversion" in
*linux*::*.*|*gnukfreebsd*::*.*|gnu::*.*)
tHdrH=_tmpHdr
n*|N*) ;;
*) echo >&4;
echo "Ok. Stopping Configure." >&4;
- echo "Please remove the duplicate directory (eg using git clean) and then re-run Configure" >&4;
+ echo "Please remove the duplicate directory (e.g. using git clean) and then re-run Configure" >&4;
exit 1;;
esac;
echo "Ok. You will need to correct config.sh before running make." >&4;
;;
*) case "$usedl" in
$define|true|[yY]*)
- set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -lgdbm_compat @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -lgdbm_compat @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
shift
perllibs="$*"
;;
https://perl5.git.perl.org / perl5.git / blobdiff