#!/usr/bin/perl -w
-# A first attempt at some automated support for making a perl release.
+# A tool to build a perl release tarball
# Very basic but functional - if you're on a unix system.
#
+# If you're on Win32 then it should still work, but various Unix command-line
+# tools will need to be available somewhere. An obvious choice is to install
+# Cygwin and ensure its 'bin' folder is on the PATH in the shell where you run
+# this script. The Cygwin 'bin' folder needs to precede the Windows 'system32'
+# folder so that Cygwin's 'find' command is found in preference to the Windows
+# 'find' command. In addition to the commands installed by default, your Cygwin
+# installation will need to contain at least the 'cpio' and '7z' commands.
+# Finally, ensure that the 'awk', 'shasum' (if you have it) and '7z' commands
+# are copies of 'gawk.exe', 'sha1sum.exe' and 'lib\p7zip\7z.exe' respectively,
+# rather than the links to them that only work in a Cygwin bash shell which
+# they are by default.
+#
# No matter how automated this gets, you'll always need to read
-# and re-read pumpkin.pod checking for things to be done at various
-# stages of the process.
+# and re-read pumpkin.pod and release_managers_guide.pod to
+# check for things to be done at various stages of the process.
#
# Tim Bunce, June 1997
use ExtUtils::Manifest qw(fullcheck);
+$ExtUtils::Manifest::Quiet = 1;
+use Getopt::Std;
$|=1;
-$relroot = ".."; # XXX make an option
+
+sub usage { die <<EOF; }
+usage: $0 [ -r rootdir ] [-s suffix ] [ -b ] [ -n ]
+ -r rootdir directory under which to create the build dir and tarball
+ defaults to '..'
+ -s suffix suffix to append to to the perl-x.y.z dir and tarball name
+ defaults to the concatenation of the local_patches entry
+ in patchlevel.h (or blank, if none)
+ -b make a .bz2 file in addtion to a .gz file
+ -x make a .xz file in addtion to a .gz file
+ -n do not make any tarballs, just the directory
+EOF
+
+my %opts;
+getopts('bxnr:s:', \%opts) or usage;
+@ARGV && usage;
+
+$relroot = defined $opts{r} ? $opts{r} : "..";
die "Must be in root of the perl source tree.\n"
unless -f "./MANIFEST" and -f "patchlevel.h";
-open PATCHLEVEL,"<patchlevel.h" or die;
+open PATCHLEVEL, '<', 'patchlevel.h' or die;
my @patchlevel_h = <PATCHLEVEL>;
close PATCHLEVEL;
my $patchlevel_h = join "", grep { /^#\s*define/ } @patchlevel_h;
$subversion = $1 if $patchlevel_h =~ /PERL_SUBVERSION\s+(\d+)/;
die "Unable to parse patchlevel.h" unless $subversion >= 0;
$vers = sprintf("%d.%d.%d", $revision, $patchlevel, $subversion);
-$vms_vers = sprintf("%d_%d_%d", $revision, $patchlevel, $subversion);
# fetch list of local patches
my (@local_patches, @lpatch_tags, $lpatch_tags);
-@local_patches = grep { /^static.*local_patches/../^};/ } @patchlevel_h;
-@local_patches = grep { !/^\s*,?NULL/ } @local_patches;
+@local_patches = grep { !/^\s*,?NULL/ && ! /,"uncommitted-changes"/ }
+ grep { /^static.*local_patches/../^};/ }
+ @patchlevel_h;
@lpatch_tags = map { /^\s*,"(\w+)/ } @local_patches;
$lpatch_tags = join "-", @lpatch_tags;
$perl = "perl-$vers";
$reldir = "$perl";
+
+$lpatch_tags = $opts{s} if defined $opts{s};
$reldir .= "-$lpatch_tags" if $lpatch_tags;
print "\nMaking a release for $perl in $relroot/$reldir\n\n";
print "Cross-checking the MANIFEST...\n";
($missfile, $missentry) = fullcheck();
-warn "Can't make a release with MANIFEST files missing.\n" if @$missfile;
-warn "Can't make a release with files not listed in MANIFEST.\n" if @$missentry;
+@$missentry
+ = grep {$_ !~ m!^\.git/! and $_ !~ m!(?:/|^)\.gitignore!} @$missentry;
+if (@$missfile ) {
+ warn "Can't make a release with MANIFEST files missing:\n";
+ warn "\t".$_."\n" for (@$missfile);
+}
+if (@$missentry ) {
+ warn "Can't make a release with files not listed in MANIFEST\n";
+ warn "\t".$_."\n" for (@$missentry);
+
+}
if ("@$missentry" =~ m/\.orig\b/) {
# Handy listing of find command and .orig files from patching work.
# I tend to run 'xargs rm' and copy and paste the file list.
print "\n";
# VMS no longer has hardcoded version numbers descrip.mms
-#print "Updating VMS version specific files with $vms_vers...\n";
-#system("perl -pi -e 's/^\QPERL_VERSION = \E\d\_\d+(\s*\#)/PERL_VERSION = $vms_vers$1/' vms/descrip.mms");
-
-
print "Creating $relroot/$reldir release directory...\n";
die "$relroot/$reldir release directory already exists\n" if -e "$relroot/$reldir";
chdir "$relroot/$reldir" or die $!;
+
print "Setting file permissions...\n";
system("find . -type f -print | xargs chmod 0444");
system("find . -type d -print | xargs chmod 0755");
-system("find t ext lib -name '*.t' -print | xargs chmod +x");
-system("find t ext lib -name 'test.pl' -print | xargs chmod +x");
-my @exe = qw(
- Configure
- configpm
- configure.gnu
- embed.pl
- installperl
- installman
- keywords.pl
- opcode.pl
- perly.fixer
- t/TEST
- *.SH
- vms/ext/Stdio/test.pl
- vms/ext/filespec.t
- x2p/*.SH
- Porting/findrfuncs
- Porting/genlog
- Porting/makerel
- Porting/p4genpatch
- Porting/patchls
- Porting/*.pl
- mpeix/nm
- mpeix/relink
- Cross/generate_config_sh
- Cross/warp
-);
+my @exe = map { my ($f) = split; glob($f) }
+ grep { $_ !~ /\A#/ && $_ !~ /\A\s*\z/ }
+ map { split "\n" }
+ do { local (@ARGV, $/) = 'Porting/exec-bit.txt'; <> };
+
system("chmod +x @exe") == 0
or die "system: $!";
my @writables = qw(
NetWare/config_H.wc
NetWare/Makefile
+ feature.h
+ lib/feature.pm
keywords.h
+ keywords.c
opcode.h
opnames.h
pp_proto.h
- pp.sym
proto.h
embed.h
embedvar.h
- global.sym
- pod/perlintern.pod
- pod/perlapi.pod
+ overload.inc
+ overload.h
+ mg_vtable.h
perlapi.h
perlapi.c
- ext/ByteLoader/byterun.h
- ext/ByteLoader/byterun.c
- ext/B/B/Asmdata.pm
- ext/Devel/PPPort/PPPort.xs
- ext/Devel/PPPort/module2.c
- ext/Devel/PPPort/module3.c
+ cpan/Devel-PPPort/module2.c
+ cpan/Devel-PPPort/module3.c
+ cpan/autodie/t/touch_me
+ reentr.c
+ reentr.h
+ regcharclass.h
regnodes.h
warnings.h
lib/warnings.pm
- vms/perly_c.vms
- vms/perly_h.vms
+ win32/GNUmakefile
win32/Makefile
+ win32/Makefile.ce
win32/makefile.mk
- win32/config_H.bc
+ win32/config_H.ce
win32/config_H.gc
win32/config_H.vc
- wince/config_H.ce
- wince/Makefile.ce
+ uconfig.h
);
-system("chmod +w @writables") == 0
- or die "system: $!";
-print "Adding CRs to DOSish files...\n";
-# This list is also in curliff.pl.
-my @crlf = qw(
- djgpp/configure.bat
- README.ce
- README.dos
- README.symbian
- README.win32
- symbian/config.pl
- symbian/makesis.pl
- symbian/README
- symbian/xsbuild.pl
- win32/Makefile
- win32/makefile.mk
- wince/Makefile.ce
- wince/compile-all.bat
- wince/README.perlce
- wince/registry.bat
-);
-system("perl -pi -e 's/\\015*\\012/\\015\\012/' @crlf") == 0
- or die "system: $!";
-print "\n";
+my $out = `chmod u+w @writables 2>&1`;
+if ($? != 0) {
+ warn $out;
+ if ($out =~ /no such file/i) {
+ warn "Check that the files above still exist in the Perl core.\n";
+ warn "If not, remove them from \@writables in Porting/makerel\n";
+ }
+ exit 1;
+}
+
+warn $out if $out;
chdir ".." or die $!;
-print "Creating and compressing the tar file...\n";
+exit if $opts{n};
+
my $src = (-e $perl) ? $perl : 'perl'; # 'perl' in maint branch
-$cmd = "tar cf - $reldir | gzip --best > $reldir.tar.gz";
-system($cmd) == 0
- or die "$cmd failed";
+
+print "Checking if you have 7z...\n";
+my $output_7z = `7z 2>&1`;
+my $have_7z = defined $output_7z && $output_7z =~ /7-Zip/;
+
+print "Checking if you have advdef...\n";
+my $output_advdef = `advdef --version 2>&1`;
+my $have_advdef = defined $output_advdef && $output_advdef =~ /advancecomp/;
+
+if ($have_7z) {
+ print "Creating and compressing the tar.gz file with 7z...\n";
+ $cmd = "tar cf - $reldir | 7z a -tgzip -mx9 -bd -si $reldir.tar.gz";
+ system($cmd) == 0 or die "$cmd failed";
+} else {
+ print "Creating and compressing the tar.gz file...\n";
+ $cmd = "tar cf - $reldir | gzip --best > $reldir.tar.gz";
+ system($cmd) == 0 or die "$cmd failed";
+ if ($have_advdef) {
+ print "Recompressing the tar.gz file with advdef...\n";
+ $cmd = "advdef -z -4 $reldir.tar.gz";
+ system($cmd) == 0 or die "$cmd failed";
+ }
+}
+
+if ($opts{b}) {
+ if ($have_7z) {
+ print "Creating and compressing the tar.bz2 file with 7z...\n";
+ $cmd = "tar cf - $reldir | 7z a -tbzip2 -mx9 -bd -si $reldir.tar.bz2";
+ system($cmd) == 0 or die "$cmd failed";
+ } else {
+ print "Creating and compressing the tar.bz2 file...\n";
+ $cmd = "tar cf - $reldir | bzip2 > $reldir.tar.bz2";
+ system($cmd) == 0 or die "$cmd failed";
+ }
+}
+
+if ($opts{x}) {
+ print "Creating and compressing the tar.gz file with 7z...\n";
+ $cmd = "tar cf - $reldir | xz -z -c > $reldir.tar.xz";
+ system($cmd) == 0 or die "$cmd failed";
+}
+
print "\n";
system("ls -ld $perl*");
+print "\n";
+
+my $null = $^O eq 'MSWin32' ? 'NUL' : '/dev/null';
+for my $sha (qw(sha1 shasum sha1sum)) {
+ if (`which $sha 2>$null`) {
+ system("$sha $perl*.tar.*");
+ last;
+ }
+}
https://perl5.git.perl.org / perl5.git / blobdiff