*/
#$i_syssecrt I_SYS_SECURITY /**/
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "$osname" /**/
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double. Usual values are 2, 4 and 8. The default is eight,
#define MEM_ALIGNBYTES $alignbytes
#endif
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for $package. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#$d_archlib ARCHLIB "$archlib" /**/
+#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "$archname" /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
+ */
+#$d_atolf HAS_ATOLF /**/
+
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
+ */
+#$d_atoll HAS_ATOLL /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+#define BIN "$bin" /**/
+#define BIN_EXP "$binexp" /**/
+
+/* PERL_BINCOMPAT_5005:
+ * This symbol, if defined, indicates that Perl 5.006 should be
+ * binary-compatible with Perl 5.005. This is impossible for builds
+ * that use features like threads and multiplicity it is always $undef
+ * for those versions.
+ */
+#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
+
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* i.e. 0x1234 or 0x4321, etc...
#define BYTEORDER 0x$byteorder /* large digits for MSB */
#endif /* NeXT */
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if $cpp_stuff == 1
+#define CAT2(a,b)a/**/b
+#define STRINGIFY(a)"a"
+ /* If you can get stringification with catify, tell me how! */
+#endif
+#if $cpp_stuff == 42
+#define CAT2(a,b)a ## b
+#define StGiFy(a)# a
+#define STRINGIFY(a)StGiFy(a)
+#endif
+#if $cpp_stuff != 1 && $cpp_stuff != 42
+#include "Bletch: How does this C preprocessor catenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+#define CPPSTDIN "$cppstdin"
+#define CPPMINUS "$cppminus"
+#define CPPRUN "$cpprun"
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#$d_access HAS_ACCESS /**/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
#$d_void_closedir VOID_CLOSEDIR /**/
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
+ */
+#$d_csh HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "$full_csh" /**/
+#endif
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
+ */
+#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48 _((void));
+ */
+#$d_drand48proto HAS_DRAND48_PROTO /**/
+
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+#$d_endgrent HAS_ENDGRENT /**/
+
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
+ */
+#$d_endhent HAS_ENDHOSTENT /**/
+
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
+ */
+#$d_endnent HAS_ENDNETENT /**/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
+ */
+#$d_endpent HAS_ENDPROTOENT /**/
+
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+#$d_endpwent HAS_ENDPWENT /**/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
+ */
+#$d_endsent HAS_ENDSERVENT /**/
+
+/* HAS_ENDSPENT:
+ * This symbol, if defined, indicates that the endspent system call is
+ * available to finalize the scan of SysV shadow password entries.
+ */
+#$d_endspent HAS_ENDSPENT /**/
+
/* HAS_FD_SET:
* This symbol, when defined, indicates presence of the fd_set typedef
* in <sys/types.h>
*/
#$d_fd_set HAS_FD_SET /**/
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
+ */
+#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_fseeko HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+#$d_fstatfs HAS_FSTATFS /**/
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+#$d_ftello HAS_FTELLO /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
#define Gconvert(x,n,t,b) $d_Gconvert
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
- */
-#$d_gnulibc HAS_GNULIBC /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-#$d_isascii HAS_ISASCII /**/
+#$d_getgrent HAS_GETGRENT /**/
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-#$d_lchown HAS_LCHOWN /**/
+#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-#$d_open3 HAS_OPEN3 /**/
+#$d_gethbyname HAS_GETHOSTBYNAME /**/
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-#$d_safebcpy HAS_SAFE_BCOPY /**/
+#$d_gethent HAS_GETHOSTENT /**/
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
*/
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+#$d_gethname HAS_GETHOSTNAME /**/
+#$d_uname HAS_UNAME /**/
+#$d_phostname HAS_PHOSTNAME
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "$aphostname" /* How to get the host name */
+#endif
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_sigaction HAS_SIGACTION /**/
+#$d_gethostprotos HAS_GETHOST_PROTOS /**/
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
*/
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+#$d_getmnt HAS_GETMNT /**/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
*/
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
+#$d_getmntent HAS_GETMNTENT /**/
+
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
+#$d_getnbyaddr HAS_GETNETBYADDR /**/
+
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-#$d_sigsetjmp HAS_SIGSETJMP /**/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
+#$d_getnbyname HAS_GETNETBYNAME /**/
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#$d_getnent HAS_GETNETENT /**/
+
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
+#$d_getnetprotos HAS_GETNET_PROTOS /**/
+
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
+#$d_getpent HAS_GETPROTOENT /**/
+
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
*/
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
*/
-#$d_stdstdio USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
-#endif
+#$d_getpbyname HAS_GETPROTOBYNAME /**/
+#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
+#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
*/
-#$d_stdiobase USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
-#endif
+#$d_getpwent HAS_GETPWENT /**/
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
*/
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
+#$d_getsent HAS_GETSERVENT /**/
+
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
+#$d_getservprotos HAS_GETSERV_PROTOS /**/
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
+/* HAS_GETSPENT:
+ * This symbol, if defined, indicates that the getspent system call is
+ * available to retrieve SysV shadow password entries sequentially.
*/
-#define DOUBLESIZE $doublesize /**/
+#$d_getspent HAS_GETSPENT /**/
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
*/
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
+#$d_getspnam HAS_GETSPNAM /**/
+
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
*/
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
*/
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
+#$d_getsbyname HAS_GETSERVBYNAME /**/
+#$d_getsbyport HAS_GETSERVBYPORT /**/
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used.
*/
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
+#$d_gnulibc HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
*/
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
+#$d_hasmntopt HAS_HASMNTOPT /**/
+
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
*/
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#$d_htonl HAS_HTONL /**/
+#$d_htonl HAS_HTONS /**/
+#$d_htonl HAS_NTOHL /**/
+#$d_htonl HAS_NTOHS /**/
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
*/
-#define PTRSIZE $ptrsize /**/
+#$d_isascii HAS_ISASCII /**/
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in it's headers.
- * See HAS_DRAND48_PROTO.
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
*/
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
+#$d_lchown HAS_LCHOWN /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
*/
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
+#$d_ldbl_dig HAS_LDBL_DIG /* */
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
*/
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
*/
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
+#$d_longdbl HAS_LONG_DOUBLE /**/
+#ifdef HAS_LONG_DOUBLE
+#define LONG_DOUBLESIZE $longdblsize /**/
+#endif
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+/* HAS_LONG_LONG:
+ * This symbol will be defined if the C compiler supports long long.
*/
-#define SSize_t $ssizetype /* signed count of bytes */
+/* LONGLONGSIZE:
+ * This symbol contains the size of a long long, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long long.
+ */
+#$d_longlong HAS_LONG_LONG /**/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE $longlongsize /**/
+#endif
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
*/
-#$ebcdic EBCDIC /**/
+#$d_memchr HAS_MEMCHR /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for $package. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
*/
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$d_msg HAS_MSG /**/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-#$d_archlib ARCHLIB "$archlib" /**/
-#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
+#$d_open3 HAS_OPEN3 /**/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
*/
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
*/
-#define BIN "$bin" /**/
-#define BIN_EXP "$binexp" /**/
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+#$d_pthread_yield HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD $sched_yield /**/
+#$d_sched_yield HAS_SCHED_YIELD /**/
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
+/* HAS_SAFE_BCOPY:
+ * This symbol, if defined, indicates that the bcopy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+#$d_safebcpy HAS_SAFE_BCOPY /**/
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
+/* HAS_SAFE_MEMCPY:
+ * This symbol, if defined, indicates that the memcpy routine is available
+ * to copy potentially overlapping memory blocks. Otherwise you should
+ * probably use memmove() or memcpy(). If neither is defined, roll your
+ * own version.
*/
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$d_safemcpy HAS_SAFE_MEMCPY /**/
+
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
*/
-#define PRIVLIB "$privlib" /**/
-#define PRIVLIB_EXP "$privlibexp" /**/
+#$d_sanemcmp HAS_SANE_MEMCMP /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$d_sem HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
*/
-#define SITEARCH "$sitearch" /**/
-#define SITEARCH_EXP "$sitearchexp" /**/
+#$d_setgrent HAS_SETGRENT /**/
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#$d_setgrps HAS_SETGROUPS /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
*/
-#define SITELIB "$sitelib" /**/
-#define SITELIB_EXP "$sitelibexp" /**/
+#$d_sethent HAS_SETHOSTENT /**/
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
*/
-#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
+#$d_setnent HAS_SETNETENT /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
*/
-#define OSNAME "$osname" /**/
+#$d_setpent HAS_SETPROTOENT /**/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
- */
-#if $cpp_stuff == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if $cpp_stuff == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if $cpp_stuff != 1 && $cpp_stuff != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
+#$d_setpwent HAS_SETPWENT /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
- */
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
*/
-#define CPPSTDIN "$cppstdin"
-#define CPPMINUS "$cppminus"
-#define CPPRUN "$cpprun"
-#define CPPLAST "$cpplast"
+#$d_setsent HAS_SETSERVENT /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* HAS_SETSPENT:
+ * This symbol, if defined, indicates that the setspent system call is
+ * available to initialize the scan of SysV shadow password entries.
*/
-#$d_access HAS_ACCESS /**/
+#$d_setspent HAS_SETSPENT /**/
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
- */
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
*/
-#$d_csh HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "$full_csh" /**/
-#endif
+#$d_setvbuf HAS_SETVBUF /**/
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
*/
-#$d_endgrent HAS_ENDGRENT /**/
+#$d_sfio USE_SFIO /**/
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
*/
-#$d_endhent HAS_ENDHOSTENT /**/
+#$d_shm HAS_SHM /**/
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
*/
-#$d_endnent HAS_ENDNETENT /**/
+#$d_sigaction HAS_SIGACTION /**/
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
*/
-#$d_endpent HAS_ENDPROTOENT /**/
-
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
-#$d_endpwent HAS_ENDPWENT /**/
-
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
-#$d_endsent HAS_ENDSERVENT /**/
-
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
-#$d_getgrent HAS_GETGRENT /**/
+#$d_sigsetjmp HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
+#endif
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
*/
-#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
-
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
*/
-#$d_gethbyname HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#$d_gethent HAS_GETHOSTENT /**/
-
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
*/
-#$d_gethname HAS_GETHOSTNAME /**/
-#$d_uname HAS_UNAME /**/
-#$d_phostname HAS_PHOSTNAME
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "$aphostname" /* How to get the host name */
-#endif
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+#$d_socket HAS_SOCKET /**/
+#$d_sockpair HAS_SOCKETPAIR /**/
+#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
+#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
+#$d_msg_oob HAS_MSG_OOB /**/
+#$d_msg_peek HAS_MSG_PEEK /**/
+#$d_msg_proxy HAS_MSG_PROXY /**/
+#$d_scm_rights HAS_SCM_RIGHTS /**/
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
*/
-#$d_getnbyaddr HAS_GETNETBYADDR /**/
+#$d_sqrtl HAS_SQRTL /**/
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
*/
-#$d_getnbyname HAS_GETNETBYNAME /**/
+#ifndef USE_STAT_BLOCKS
+#$d_statblks USE_STAT_BLOCKS /**/
+#endif
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
*/
-#$d_getnent HAS_GETNETENT /**/
+#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
*/
-#$d_getpent HAS_GETPROTOENT /**/
+#$d_statfs_s HAS_STRUCT_STATFS /**/
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
*/
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
- */
-#$d_getpbyname HAS_GETPROTOBYNAME /**/
-#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
-
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
- */
-#$d_getpwent HAS_GETPWENT /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
- */
-#$d_getsent HAS_GETSERVENT /**/
-
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
- */
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
- */
-#$d_getsbyname HAS_GETSERVBYNAME /**/
-#$d_getsbyport HAS_GETSERVBYPORT /**/
-
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#$d_htonl HAS_HTONL /**/
-#$d_htonl HAS_HTONS /**/
-#$d_htonl HAS_NTOHL /**/
-#$d_htonl HAS_NTOHS /**/
-
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
- */
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
- */
-#$d_longdbl HAS_LONG_DOUBLE /**/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE $longdblsize /**/
-#endif
-
-/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports long long.
- */
-/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long long.
- */
-#$d_longlong HAS_LONG_LONG /**/
-#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE $longlongsize /**/
-#endif
-
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#$d_memchr HAS_MEMCHR /**/
-
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
- */
-#$d_msg HAS_MSG /**/
-
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-#$d_sem HAS_SEM /**/
-
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
- */
-#$d_setgrent HAS_SETGRENT /**/
-
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
- */
-#$d_setgrps HAS_SETGROUPS /**/
-
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
- */
-#$d_sethent HAS_SETHOSTENT /**/
-
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
- */
-#$d_setnent HAS_SETNETENT /**/
-
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
- */
-#$d_setpent HAS_SETPROTOENT /**/
-
-/* HAS_SETPWENT:
- * This symbol, if defined, indicates that the setpwent routine is
- * available for initializing sequential access of the passwd database.
- */
-#$d_setpwent HAS_SETPWENT /**/
-
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
- */
-#$d_setsent HAS_SETSERVENT /**/
-
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
- */
-#$d_setvbuf HAS_SETVBUF /**/
-
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-#$d_shm HAS_SHM /**/
-
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
- */
-/* HAS_SOCKETPAIR:
- * This symbol, if defined, indicates that the BSD socketpair() call is
- * supported.
- */
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-#$d_socket HAS_SOCKET /**/
-#$d_sockpair HAS_SOCKETPAIR /**/
-#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
-#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
-#$d_msg_oob HAS_MSG_OOB /**/
-#$d_msg_peek HAS_MSG_PEEK /**/
-#$d_msg_proxy HAS_MSG_PROXY /**/
-#$d_scm_rights HAS_SCM_RIGHTS /**/
-
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
- */
-#ifndef USE_STAT_BLOCKS
-#$d_statblks USE_STAT_BLOCKS /**/
-#endif
-
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#$d_strerror HAS_STRERROR /**/
-#$d_syserrlst HAS_SYS_ERRLIST /**/
-#define Strerror(e) $d_strerrm
-
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
- */
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
- */
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
- */
-#$d_union_semun HAS_UNION_SEMUN /**/
-#$d_semctl_semun USE_SEMCTL_SEMUN /**/
-#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
-
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-#$d_vfork HAS_VFORK /**/
-
-/* Signal_t:
- * This symbol's value is either "void" or "int", corresponding to the
- * appropriate return type of a signal handler. Thus, you can declare
- * a signal handler using "Signal_t (*handler)()", and define the
- * handler using "Signal_t handler(sig)".
- */
-#define Signal_t $signal_t /* Signal handler's return type */
-
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgropus(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, uid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgropus()..
- */
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
-#endif
-
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
- */
-/* GRPASSWD:
- * This symbol, if defined, indicates to the C program that struct group
- * in <grp.h> contains gr_passwd.
- */
-#$i_grp I_GRP /**/
-#$d_grpasswd GRPASSWD /**/
-
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
- */
-#$i_netdb I_NETDB /**/
-
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
- */
-/* PWQUOTA:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_quota.
- */
-/* PWAGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_age.
- */
-/* PWCHANGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_change.
- */
-/* PWCLASS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_class.
- */
-/* PWEXPIRE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_expire.
- */
-/* PWCOMMENT:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_comment.
- */
-/* PWGECOS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_gecos.
- */
-/* PWPASSWD:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_passwd.
- */
-#$i_pwd I_PWD /**/
-#$d_pwquota PWQUOTA /**/
-#$d_pwage PWAGE /**/
-#$d_pwchange PWCHANGE /**/
-#$d_pwclass PWCLASS /**/
-#$d_pwexpire PWEXPIRE /**/
-#$d_pwcomment PWCOMMENT /**/
-#$d_pwgecos PWGECOS /**/
-#$d_pwpasswd PWPASSWD /**/
-
-/* I_SYSUIO:
- * This symbol, if defined, indicates that <sys/uio.h> exists and
- * should be included.
- */
-#$i_sysuio I_SYSUIO /**/
+#$d_fstatvfs HAS_FSTATVFS /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
*/
-#define Malloc_t $malloctype /**/
-#define Free_t $freetype /**/
-
-/* MYMALLOC:
- * This symbol, if defined, indicates that we're using our own malloc.
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
*/
-#$d_mymalloc MYMALLOC /**/
-
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
*/
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
*/
-#define SIG_NAME $sig_name_init /**/
-#define SIG_NUM $sig_num_init /**/
-
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
*/
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
+#$d_stdstdio USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) $stdio_ptr
+#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) $stdio_cnt
+#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
#endif
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-#$d_atolf HAS_ATOLF /**/
-
-/* HAS_ATOLL:
- * This symbol, if defined, indicates that the atoll routine is
- * available to convert strings into long longs.
- */
-#$d_atoll HAS_ATOLL /**/
-
-/* PERL_BINCOMPAT_5005:
- * This symbol, if defined, indicates that Perl 5.006 should be
- * binary-compatible with Perl 5.005. This is impossible for builds
- * that use features like threads and multiplicity it is always $undef
- * for those versions.
- */
-#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
-
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
- */
-#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
-
-/* HAS_ENDSPENT:
- * This symbol, if defined, indicates that the endspent system call is
- * available to finalize the scan of SysV shadow password entries.
- */
-#$d_endspent HAS_ENDSPENT /**/
-
-/* HAS_STRUCT_FS_DATA:
- * This symbol, if defined, indicates that the struct fs_data
- * to do statfs() is supported.
- */
-#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
-
-/* HAS_FSEEKO:
- * This symbol, if defined, indicates that the fseeko routine is
- * available to fseek beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_fseeko HAS_FSEEKO /**/
-
-/* HAS_FSTATFS:
- * This symbol, if defined, indicates that the fstatfs routine is
- * available to stat filesystems by file descriptors.
- */
-#$d_fstatfs HAS_FSTATFS /**/
-/* HAS_FTELLO:
- * This symbol, if defined, indicates that the ftello routine is
- * available to ftell beyond 32 bits (useful for ILP32 hosts).
- */
-#$d_ftello HAS_FTELLO /**/
-
-/* HAS_GETMNT:
- * This symbol, if defined, indicates that the getmnt routine is
- * available to get filesystem mount info by filename.
- */
-#$d_getmnt HAS_GETMNT /**/
-
-/* HAS_GETMNTENT:
- * This symbol, if defined, indicates that the getmntent routine is
- * available to iterate through mounted file systems to get their info.
- */
-#$d_getmntent HAS_GETMNTENT /**/
-
-/* HAS_GETSPENT:
- * This symbol, if defined, indicates that the getspent system call is
- * available to retrieve SysV shadow password entries sequentially.
- */
-#$d_getspent HAS_GETSPENT /**/
-
-/* HAS_GETSPNAM:
- * This symbol, if defined, indicates that the getspnam system call is
- * available to retrieve SysV shadow password entries by name.
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
*/
-#$d_getspnam HAS_GETSPNAM /**/
-
-/* HAS_HASMNTOPT:
- * This symbol, if defined, indicates that the hasmntopt routine is
- * available to query the mount options of file systems.
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
*/
-#$d_hasmntopt HAS_HASMNTOPT /**/
-
-/* HAS_INT64_T:
- * This symbol will defined if the C compiler supports int64_t.
- * Usually the <inttypes.h> needs to be included, but sometimes
- * <sys/types.h> is enough.
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
*/
-#$d_int64t HAS_INT64_T /**/
+#$d_stdiobase USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) $stdio_base
+#define FILE_bufsiz(fp) $stdio_bufsiz
+#endif
-/* HAS_LDBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol LDBL_DIG, which is the number
- * of significant digits in a long double precision number. Unlike
- * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
*/
-#$d_ldbl_dig HAS_LDBL_DIG /* */
-
-/* HAS_SETSPENT:
- * This symbol, if defined, indicates that the setspent system call is
- * available to initialize the scan of SysV shadow password entries.
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
*/
-#$d_setspent HAS_SETSPENT /**/
-
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
*/
-#$d_sfio USE_SFIO /**/
+#$d_strerror HAS_STRERROR /**/
+#$d_syserrlst HAS_SYS_ERRLIST /**/
+#define Strerror(e) $d_strerrm
-/* HAS_SQRTL:
- * This symbol, if defined, indicates that the sqrtl routine is
- * available to do long double square roots.
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
*/
-#$d_sqrtl HAS_SQRTL /**/
+#$d_strtold HAS_STRTOLD /**/
-/* HAS_STRUCT_STATFS_F_FLAGS:
- * This symbol, if defined, indicates that the struct statfs
- * does have the f_flags member containing the mount flags of
- * the filesystem containing the file.
- * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
- * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
- * have statfs() and struct statfs, they have ustat() and getmnt()
- * with struct ustat and struct fs_data.
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
*/
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
+#$d_strtoll HAS_STRTOLL /**/
-/* HAS_STRUCT_STATFS:
- * This symbol, if defined, indicates that the struct statfs
- * to do statfs() is supported.
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
*/
-#$d_statfs_s HAS_STRUCT_STATFS /**/
+#$d_strtoull HAS_STRTOULL /**/
-/* HAS_FSTATVFS:
- * This symbol, if defined, indicates that the fstatvfs routine is
- * available to stat filesystems by file descriptors.
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
*/
-#$d_fstatvfs HAS_FSTATVFS /**/
+#$d_strtouq HAS_STRTOUQ /**/
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
*/
#$d_telldirproto HAS_TELLDIR_PROTO /**/
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define Time_t $timetype /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#$d_times HAS_TIMES /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+#$d_union_semun HAS_UNION_SEMUN /**/
+#$d_semctl_semun USE_SEMCTL_SEMUN /**/
+#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
*/
#$d_ustat HAS_USTAT /**/
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+#$d_vfork HAS_VFORK /**/
+
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t $signal_t /* Signal handler's return type */
+
+/* HAS_VPRINTF:
+ * This symbol, if defined, indicates that the vprintf routine is available
+ * to printf with a pointer to an argument list. If unavailable, you
+ * may need to write your own, probably in terms of _doprnt().
+ */
+/* USE_CHAR_VSPRINTF:
+ * This symbol is defined if this system has vsprintf() returning type
+ * (char*). The trend seems to be to declare it as "int vsprintf()". It
+ * is up to the package author to declare vsprintf correctly based on the
+ * symbol.
+ */
+#$d_vprintf HAS_VPRINTF /**/
+#$d_charvspr USE_CHAR_VSPRINTF /**/
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
#$usedl USE_DYNAMIC_LOADING /**/
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
+ */
+#define DOUBLESIZE $doublesize /**/
+
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
+ */
+#$ebcdic EBCDIC /**/
+
/* FFLUSH_NULL:
* This symbol, if defined, tells that fflush(NULL) does flush
* all pending stdio output.
#$fflushNULL FFLUSH_NULL /**/
#$fflushall FFLUSH_ALL /**/
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t $fpostype /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f $gidformat /**/
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size $gidsize /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * uid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t $gidtype /* Type for getgid(), etc... */
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgropus(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, uid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgropus()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
#define DB_Hash_t $db_hashtype /**/
#define DB_Prefix_t $db_prefixtype /**/
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+#$i_grp I_GRP /**/
+#$d_grpasswd GRPASSWD /**/
+
/* I_INTTYPES:
* This symbol, if defined, indicates to the C program that it should
* include <inttypes.h>.
*/
#$i_inttypes I_INTTYPES /**/
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+#$i_machcthr I_MACH_CTHREADS /**/
+
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
#$i_mntent I_MNTENT /**/
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
+ */
+#$i_netdb I_NETDB /**/
+
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/tcp.h>.
*/
#$i_poll I_POLL /**/
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+#$i_pthread I_PTHREAD /**/
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
+ */
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
+ */
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
+ */
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+/* PWGECOS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_gecos.
+ */
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
+#$i_pwd I_PWD /**/
+#$d_pwquota PWQUOTA /**/
+#$d_pwage PWAGE /**/
+#$d_pwchange PWCHANGE /**/
+#$d_pwclass PWCLASS /**/
+#$d_pwexpire PWEXPIRE /**/
+#$d_pwcomment PWCOMMENT /**/
+#$d_pwgecos PWGECOS /**/
+#$d_pwpasswd PWPASSWD /**/
+
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
* This symbol, if defined, indicates that <sys/statvfs.h> exists and
* should be included.
*/
-#$i_sysstatvfs I_SYS_STATVFS /**/
+#$i_sysstatvfs I_SYS_STATVFS /**/
+
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+#$i_sysuio I_SYSUIO /**/
/* I_SYS_VFS:
* This symbol, if defined, indicates that <sys/vfs.h> exists and
*/
#$i_sysvfs I_SYS_VFS /**/
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
+ */
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
+ */
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
+ */
+#$i_time I_TIME /**/
+#$i_systime I_SYS_TIME /**/
+#$i_systimek I_SYS_TIME_KERNEL /**/
+
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
* should be included.
*/
#$i_ustat I_USTAT /**/
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
+ */
+#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
+
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t $lseektype /* <offset> type */
+#define LSEEKSIZE $lseeksize /* <offset> size */
+#define Off_t_size $lseeksize /* <offset> size */
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
+ */
+#define Malloc_t $malloctype /**/
+#define Free_t $freetype /**/
+
+/* MYMALLOC:
+ * This symbol, if defined, indicates that we're using our own malloc.
+ */
+#$d_mymalloc MYMALLOC /**/
+
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
+ */
+#define Mode_t $modetype /* file mode parameter for system calls */
+
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK $o_nonblock
+#define VAL_EAGAIN $eagain
+#define RD_NODATA $rd_nodata
+#$d_eofnblk EOF_NONBLOCK
+
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
+ */
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t $netdb_host_type /**/
+#define Netdb_hlen_t $netdb_hlen_type /**/
+#define Netdb_name_t $netdb_name_type /**/
+#define Netdb_net_t $netdb_net_type /**/
+
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
*/
/* U64SIZE:
* This symbol contains the sizeof(U64).
*/
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bit of a variable of type UVSIZE.
+ */
#define IVTYPE $ivtype /**/
#define UVTYPE $uvtype /**/
#define I8TYPE $i8type /**/
#define I64SIZE $i64size /**/
#define U64SIZE $u64size /**/
#endif
+#$d_nvpresuv NV_PRESERVES_UV
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
#define UVof $uvoformat /**/
#define UVxf $uvxformat /**/
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t $pidtype /* PID type */
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "$privlib" /**/
+#define PRIVLIB_EXP "$privlibexp" /**/
+
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
+ */
+#define PTRSIZE $ptrsize /**/
+
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in it's headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
+ */
+#define Drand01() $drand01 /**/
+#define Rand_seed_t $randseedtype /**/
+#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
+#define RANDBITS $randbits /**/
+
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* That is, if you do select(n, ...), how many bits at least will be
* is either n or 32*ceil(n/32), especially many little-endians do
* the latter. This is only useful if you have select(), naturally.
*/
-#define SELECT_MIN_BITS $selectminbits /**/
+#define SELECT_MIN_BITS $selectminbits /**/
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
+ */
+#define Select_fd_set_t $selecttype /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
+ */
+#define SIG_NAME $sig_name_init /**/
+#define SIG_NUM $sig_num_init /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "$sitearch" /**/
+#define SITEARCH_EXP "$sitearchexp" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB "$sitelib" /**/
+#define SITELIB_EXP "$sitelibexp" /**/
+
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Size_t $sizetype /* length paramater for string functions */
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
+ */
+#define SSize_t $ssizetype /* signed count of bytes */
/* STARTPERL:
* This variable contains the string to put in front of a perl
#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
#define STDIO_STREAM_ARRAY $stdio_stream_array
-/* HAS_STRTOULL:
- * This symbol, if defined, indicates that the strtoull routine is
- * available to convert strings into unsigned long longs.
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-#$d_strtoull HAS_STRTOULL /**/
+#define Uid_t_f $uidformat /**/
+
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size $uidsize /* UID size */
+
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t $uidtype /* UID type */
/* USE_64_BITS:
* This symbol, if defined, indicates that 64-bit integers should
#$usesocks USE_SOCKS /**/
#endif
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48 _((void));
- */
-#$d_drand48proto HAS_DRAND48_PROTO /**/
-
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_gethostprotos HAS_GETHOST_PROTOS /**/
-
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getnetprotos HAS_GETNET_PROTOS /**/
-
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
-
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
- */
-#$d_getservprotos HAS_GETSERV_PROTOS /**/
-
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
- */
-#define Netdb_host_t $netdb_host_type /**/
-#define Netdb_hlen_t $netdb_hlen_type /**/
-#define Netdb_name_t $netdb_name_type /**/
-#define Netdb_net_t $netdb_net_type /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t $selecttype /**/
-
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
- */
-#define ARCHNAME "$archname" /**/
-
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
- */
-#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
-
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-#$d_pthread_yield HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD $sched_yield /**/
-#$d_sched_yield HAS_SCHED_YIELD /**/
-
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
- */
-#$i_machcthr I_MACH_CTHREADS /**/
-
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
- */
-#$i_pthread I_PTHREAD /**/
-
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should be built to
* use the interpreter-based threading implementation.
#endif
#$d_oldpthreads OLD_PTHREADS_API /**/
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define Time_t $timetype /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#$d_times HAS_TIMES /**/
-
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t $fpostype /* File position type */
-
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
- */
-#define Gid_t_f $gidformat /**/
-
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size $gidsize /* GID size */
-
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * uid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
- */
-#define Gid_t $gidtype /* Type for getgid(), etc... */
-
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t $lseektype /* <offset> type */
-#define LSEEKSIZE $lseeksize /* <offset> size */
-#define Off_t_size $lseeksize /* <offset> size */
-
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
- */
-#define Mode_t $modetype /* file mode parameter for system calls */
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t $pidtype /* PID type */
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Size_t $sizetype /* length paramater for string functions */
-
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f $uidformat /**/
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define Uid_t_size $uidsize /* UID size */
+#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
*/
-#define Uid_t $uidtype /* UID type */
+#ifndef VOIDUSED
+#define VOIDUSED $defvoidused
+#endif
+#define VOIDFLAGS $voidflags
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */
+#define M_VOID /* Xenix strikes again */
+#endif
#endif
!GROK!THIS!
https://perl5.git.perl.org / perl5.git / blobdiff