*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
-case "$d_symlink" in
-*define*) sln='ln -s' ;;
-*) sln='ln';;
-esac
-
case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac
+shrpenv=""
+case "$d_shrplib" in
+*define*)
+ patchlevel=`egrep '^#define[ ]+PATCHLEVEL' patchlevel.h \
+ | awk '{print $3}'`
+ case "$patchlevel" in
+ *[0-9]) plibsuf=.$so.$patchlevel;;
+ *) plibsuf=.$so;;
+ esac
+ case "$shrpdir" in
+ /usr/lib) ;;
+ "") ;;
+ *) shrpenv="env LD_RUN_PATH=$shrpdir";;
+ esac
+ pldlflags="$cccdlflags";;
+*) plibsuf=.a
+ pldlflags="";;
+esac
+
+: Prepare dependency lists for Makefile.
+dynamic_list=' '
+for f in $dynamic_ext; do
+ : the dependency named here will never exist
+ base=`echo "$f" | sed 's/.*\///'`
+ dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
+done
+
+static_list=' '
+static_ai_list=' '
+for f in $static_ext; do
+ base=`echo "$f" | sed 's/.*\///'`
+ static_list="$static_list lib/auto/$f/$base.a"
+ if test -f ext/$f/AutoInit.c; then
+ static_ai_list="$static_ai_list ext/$f/AutoInit.c"
+ fi
+ if test -f ext/$f/AutoInit.pl; then
+ static_ai_list="$static_ai_list ext/$f/AutoInit.pl"
+ fi
+done
+
echo "Extracting Makefile (with variable substitutions)"
-: This section of the file will have variable substitutions done on it.
-: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!.
-: Protect any dollar signs and backticks that you do not want interpreted
-: by putting a backslash in front. You may delete these comments.
-$spitshell >Makefile <<!GROK!THIS!
-# : Makefile.SH,v 15738Revision: 4.1 15738Date: 92/08/07 17:18:08 $
+$spitshell >Makefile <<'!NO!SUBS!'
+# Makefile.SH
+# This file is derived from Makefile.SH. Any changes made here will
+# be lost the next time you run Configure.
+# Makefile is used to generate makefile. The only difference
+# is that makefile has the dependencies filled in at the end.
+#
#
-# $Log: Makefile.SH,v $
-# Revision 4.1 92/08/07 17:18:08 lwall
-# Stage 6 Snapshot
-#
-# Revision 4.0.1.4 92/06/08 11:40:43 lwall
-# patch20: cray didn't give enough memory to /bin/sh
-# patch20: various and sundry fixes
-#
-# Revision 4.0.1.3 91/11/05 15:48:11 lwall
-# patch11: saberized perl
-# patch11: added support for dbz
-#
-# Revision 4.0.1.2 91/06/07 10:14:43 lwall
-# patch4: cflags now emits entire cc command except for the filename
-# patch4: alternate make programs are now semi-supported
-# patch4: uperl.o no longer tries to link in libraries prematurely
-# patch4: installperl now installs x2p stuff too
-#
-# Revision 4.0.1.1 91/04/11 17:30:39 lwall
-# patch1: C flags are now settable on a per-file basis
-#
-# Revision 4.0 91/03/20 00:58:54 lwall
-# 4.0 baseline.
-#
-#
+!NO!SUBS!
+$spitshell >>Makefile <<!GROK!THIS!
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
-bin = $installbin
-scriptdir = $scriptdir
-privlib = $installprivlib
-mansrc = $mansrc
-manext = $manext
+LD = $ld
+
LDFLAGS = $ldflags
CLDFLAGS = $ldflags
+
SMALL = $small
LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
-dlsrc = $dlsrc
-dlobj = $dlobj
-SLN = $sln
+LNS = $lns
RMS = rm -f
+ranlib = $ranlib
+
+# The following are mentioned only to make metaconfig include the
+# appropriate questions in Configure. If you want to change these,
+# edit config.sh instead, or specify --man1dir=/wherever on
+# installman commandline.
+bin = $installbin
+scriptdir = $scriptdir
+privlib = $installprivlib
+man1dir = $man1dir
+man1ext = $man1ext
+man3dir = $man3dir
+man3ext = $man3ext
+
+# The following are used to build and install shared libraries for
+# dynamic loading.
+LDDLFLAGS = $lddlflags
+CCDLFLAGS = $ccdlflags
+DLSUFFIX = .$dlext
+PLDLFLAGS = $pldlflags
+PLIBSUF = $plibsuf
+SHRPENV = $shrpenv
+
+dynamic_ext = $dynamic_list
+static_ext = $static_list
+ext = \$(dynamic_ext) \$(static_ext)
+static_ext_autoinit = $static_ai_list
+DYNALOADER = lib/auto/DynaLoader/DynaLoader.a
+
libs = $libs $cryptlib
-public = perl $suidperl
+public = perl $suidperl utilities translators
shellflags = $shellflags
-# To use an alternate make, set $altmake in config.sh.
+## To use an alternate make, set \$altmake in config.sh.
MAKE = ${altmake-make}
+
+# These variables will be used in a future version to make
+# the make file more portable to non-unix systems.
+AR = $ar
+EXE_EXT = $exe_ext
+LIB_EXT = $lib_ext
+OBJ_EXT = $obj_ext
+PATH_SEP = $path_sep
+
+FIRSTMAKEFILE = $firstmakefile
+
+# Any special object files needed by this architecture, e.g. os2/os2.obj
+ARCHOBJS = $archobjs
+
!GROK!THIS!
-: In the following dollars and backticks do not need the extra backslash.
+## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags $@`
+CCCMD = `sh $(shellflags) cflags $(perllib) $@`
+
+private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
-private =
+# Files to be built with variable substitution before miniperl
+# is available.
+sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
+ makedir.SH perl_exp.SH writemain.SH
-scripts = h2ph
+shextract = Makefile cflags config.h makeaperl makedepend \
+ makedir perl_exp writemain
-manpages = perl.man h2ph.man
+# Files to be built with variable substitution after miniperl is
+# available. Dependencies handled manually below (for now).
-util =
+pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
-sh = Makefile.SH makedepend.SH h2ph.SH
+plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
-h1 = EXTERN.h INTERN.h av.h cop.h config.h embed.h form.h handy.h
-h2 = hv.h op.h opcode.h perl.h regcomp.h regexp.h gv.h sv.h util.h
+addedbyconf = UU $(shextract) $(plextract) pstruct
-h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h hvdbm.h keywords.h mg.h op.h
+h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
+h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h
h = $(h1) $(h2) $(h3) $(h4)
-c1 = av.c scope.c op.c doop.c doio.c dump.c hv.c
-c2 = $(mallocsrc) mg.c perly.c pp.c regcomp.c regexec.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c globals.c
-c = $(c1) $(c2) $(c3)
+c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
-s1 = av.c scope.c op.c doop.c doio.c dump.c hv.c
-s2 = $(mallocobj) mg.c perly.c pp.c regcomp.c regexec.c
-s3 = gv.c sv.c taint.c toke.c util.c deb.c run.c perly.c
+obj1 = $(mallocobj) gv.o toke.o perly.o op.o regcomp.o dump.o util.o mg.o
+obj2 = hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o
+obj3 = doop.o doio.o regexec.o taint.o deb.o globals.o
-saber = $(s1) $(s2) $(s3)
-obj1 = av.o scope.o op.o doop.o doio.o dump.o hv.o
-obj2 = $(mallocobj) mg.o perly.o pp.o regcomp.o regexec.o
-obj3 = gv.o sv.o taint.o toke.o util.o deb.o run.o
+obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-obj = $(obj1) $(obj2) $(obj3) $(dlobj)
+# Once perl has been Configure'd and built ok you build different
+# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
+# make clean; make perllib=libperl<type>.a
+# where <type> is some combination of 'd' and(or) 'e' or 'm'.
+# See cflags to understand how this works.
+#
+# Eventually some form of 'make-a-perl' script will automate this
+# together with linking a perl executable with any desired
+# static modules.
+perllib = libperl$(PLIBSUF)
lintflags = -hbvxac
-addedbyconf = Makefile.old bsd eunice filexp loc pdp11 usg v7
-
# grrr
SHELL = /bin/sh
-.SUFFIXES: .x
-
.c.o:
- $(CCCMD) $*.c
+ $(CCCMD) $(PLDLFLAGS) $*.c
-.x.c:
- sh writemain $*.x >$*.c
+all: makefile miniperl $(private) $(plextract) $(public) $(dynamic_ext)
+ @echo " "; echo " Everything is up to date."
-all: miniperl perl lib/Config.pm
+translators: miniperl lib/Config.pm FORCE
+ @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
-#all: $(public) $(private) $(util) $(scripts)
-# cd x2p; $(MAKE) all
-# touch all
-!NO!SUBS!
-###
-### Boilerplate for all the .xs files in the ext directory.
-### XXX FIXME: At some point we also need to copy .pm files out of
-### XXX the ext directory into lib.
-# Configure sets extensions to a string like
-# "ext/dbm/NDBM_File.xs ext/dbm/ODBM_File.xs ext/dbm/GDBM_File.xs \
-# ext/dbm/SDBM_File.xs ext/posix/POSIX.xs"
-extobjs=" "
-for f in $extensions
-do
- base=`basename $f .xs`
- dir=`dirname $f`
- extobjs="$extobjs $f.o"
- $spitshell >>Makefile <<!GROK!THIS!
-
-# $base extension
-$base.c: $f ext/xsubpp ext/typemap
- test -f miniperl || make miniperl
- ext/xsubpp $f >tmp
- mv tmp $base.c
-
-$base.o: $base.c
-!GROK!THIS!
+utilities: miniperl lib/Config.pm FORCE
+ @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
- case $base in
- SDBM_File) $spitshell >>Makefile <<'!NO!SUBS!'
-lib/auto/SDBM_File/SDBM_File.so: SDBM_File.o ext/dbm/sdbm/libsdbm.a
- @- mkdir lib/auto/SDBM_File 2>/dev/null
- ld -o lib/auto/SDBM_File/SDBM_File.so SDBM_File.o ext/dbm/sdbm/libsdbm.a
+# This is now done by installman only if you actually want the man pages.
+# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
-ext/dbm/sdbm/libsdbm.a: ext/dbm/sdbm/sdbm.c ext/dbm/sdbm/sdbm.h
- cd ext/dbm/sdbm; $(MAKE) sdbm
-!NO!SUBS!
- ;;
- POSIX) $spitshell >>Makefile <<'!NO!SUBS!'
-lib/auto/POSIX/POSIX.so: POSIX.o ext/dbm/sdbm/libsdbm.a
- @- mkdir lib/auto/POSIX 2>/dev/null
- ld -o lib/auto/POSIX/POSIX.so POSIX.o ext/dbm/sdbm/libsdbm.a
-!NO!SUBS!
- ;;
- esac
-done
-
-echo "extobjs=$extobjs" >> Makefile
+# Phony target to force checking subdirectories.
+# Apparently some makes require an action for the FORCE target.
+FORCE:
+ @sh -c true
-$spitshell >>Makefile <<'!NO!SUBS!'
# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
+# The miniperl -w -MExporter line is a basic cheap test to catch errors
+# before make goes on to run preplibrary and then MakeMaker on extensions.
+# This is very handy because later errors are often caused by miniperl
+# build problems but that's not obvious to the novice.
+# The Module used here must not depend on Config or any extensions.
+
+miniperl: $& miniperlmain.o $(perllib)
+ $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain.o $(perllib) $(libs)
+ @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
-miniperlmain.c: miniperlmain.x
miniperlmain.o: miniperlmain.c
-miniperl: $& miniperlmain.o perl.o $(obj)
- $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain.o perl.o $(obj) $(libs)
+ $(CCCMD) $(PLDLFLAGS) $*.c
+
+perlmain.c: miniperlmain.c config.sh makefile $(static_ext_autoinit)
+ sh writemain $(DYNALOADER) $(static_ext) > tmp
+ sh mv-if-diff tmp perlmain.c
-perlmain.c: perlmain.x
perlmain.o: perlmain.c
-perl: $& perlmain.o perl.o $(obj) NDBM_File.o ODBM_File.o POSIX.o
- $(CC) $(LARGE) $(CLDFLAGS) -o perl perlmain.o perl.o $(obj) NDBM_File.o ODBM_File.o POSIX.o $(libs)
+ $(CCCMD) $(PLDLFLAGS) $*.c
+
+# The file ext.libs is a list of libraries that must be linked in
+# for static extensions, e.g. -lm -lgdbm, etc. The individual
+# static extension Makefile's add to it.
+ext.libs: $(static_ext)
+ -@test -f ext.libs || touch ext.libs
+
+perl: $& perlmain.o $(perllib) $(DYNALOADER) $(static_ext) ext.libs
+ $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain.o $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-libperl.rlb: libperl.a
- ranlib libperl.a
- touch libperl.rlb
+pureperl: $& perlmain.o $(perllib) $(DYNALOADER) $(static_ext) ext.libs
+ purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain.o $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
-libperl.a: $& perl.o $(obj)
- ar rcuv libperl.a $(obj)
+quantperl: $& perlmain.o $(perllib) $(DYNALOADER) $(static_ext) ext.libs
+ quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain.o $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
+
+$(perllib): $& perl.o $(obj)
+!NO!SUBS!
+
+case "$d_shrplib" in
+*define*)
+$spitshell >>Makefile <<'!NO!SUBS!'
+ $(LD) $(LDDLFLAGS) -o $@ perl.o $(obj)
+!NO!SUBS!
+;;
+*)
+$spitshell >>Makefile <<'!NO!SUBS!'
+ rm -f $(perllib)
+ $(AR) rcu $(perllib) perl.o $(obj)
+ @$(ranlib) $(perllib)
+!NO!SUBS!
+;;
+esac
+
+$spitshell >>Makefile <<'!NO!SUBS!'
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
-suidperl: $& sperl.o main.o libperl.rlb
- $(CC) $(LARGE) $(CLDFLAGS) sperl.o main.o libperl.a $(libs) -o suidperl
-
-lib/Config.pm: config.sh
- ./configpm
-
-saber: $(saber)
- # load $(saber)
- # load /lib/libm.a
+suidperl: $& sperl.o perlmain.o $(perllib) $(DYNALOADER) $(static_ext) ext.libs
+ $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain.o sperl.o $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
sperl.o: perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
- $(SLN) perl.c sperl.c
+ $(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
-dl.o: ext/dl/dl.c
- cp ext/dl/dl.c dl.c
- $(CC) -c dl.c
+# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
+# test -d lib/auto || mkdir lib/auto
+#
+preplibrary: miniperl lib/Config.pm $(plextract)
+ @./makedir lib/auto
+ @echo " AutoSplitting perl library"
+ @./miniperl -Ilib -e 'use AutoSplit; \
+ autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
-!NO!SUBS!
+# Take care to avoid modifying lib/Config.pm without reason
+lib/Config.pm: config.sh miniperl
+ ./miniperl configpm tmp
+ sh mv-if-diff tmp lib/Config.pm
-### Now on to the rest of the Makefile.
-$spitshell >>Makefile <<'!NO!SUBS!'
-
-perly.h: perly.c
- @ echo Dummy dependency for dumb parallel make
- touch perly.h
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+ ./miniperl minimod.pl > tmp && mv tmp $@
+
+$(plextract): miniperl lib/Config.pm
+ ./miniperl -Ilib $@.PL
+
+install: all install.perl install.man
+
+install.perl: all
+ ./perl installperl
+
+install.man: all
+ ./perl installman
-opcode.h: opcode.pl
- - opcode.pl
+# Not implemented yet.
+#install.html: all
+# ./perl installhtml
-embed.h: embed_h.SH global.sym interp.sym
- sh embed_h.SH
+# I now supply perly.c with the kits, so the following section is
+# used only if you force byacc to run by saying
+# make run_byacc
+# Since we patch up the byacc output, the perly.fixer script needs
+# to run with precisely the same version of byacc as I use. You
+# normally shouldn't remake perly.[ch].
-perly.c:
- @ echo 'Expect' 80 shift/reduce and 62 reduce/reduce conflicts
+run_byacc: FORCE
+ @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
sh $(shellflags) ./perly.fixer y.tab.c perly.c
mv y.tab.h perly.h
echo 'extern YYSTYPE yylval;' >>perly.h
+ - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+
+# We don't want to regenerate perly.c and perly.h, but they might
+# appear out-of-date after a patch is applied or a new distribution is
+# made.
+perly.c: perly.y
+ -@touch perly.c
+
+perly.h: perly.y
+ -@touch perly.h
+
+# The following three header files are generated automatically
+# keywords.h: keywords.pl
+# opcode.h: opcode.pl
+# embed.h: embed.pl global.sym interp.sym
+# The correct versions should be already supplied with the perl kit,
+# in case you don't have perl available.
+# To force them to run, type
+# make regen_headers
+regen_headers: FORCE
+ perl keywords.pl
+ perl opcode.pl
+ perl embed.pl
+
+# Extensions:
+# Names added to $(dynamic_ext) or $(static_ext) will automatically
+# get built. There should ordinarily be no need to change any of
+# this part of makefile.
+#
+# The dummy dependency is a place holder in case $(dynamic_ext) or
+# $(static_ext) is empty.
+#
+# DynaLoader may be needed for extensions that use Makefile.PL.
-perly.o: perly.c perly.h $(h)
- $(CCCMD) perly.c
+$(DYNALOADER): miniperl preplibrary FORCE
+ @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
-install: all
- ./perl installperl
+d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
+ @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
+
+s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
+ @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
clean:
- rm -f *.o all perl taintperl suidperl miniperl
- cd x2p; $(MAKE) clean
+ rm -f *.o *.a all perlmain.c
+ rm -f perl.exp ext.libs
+ -cd pod; $(MAKE) clean
+ -cd utils; $(MAKE) clean
+ -cd x2p; $(MAKE) clean
+ -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
+ sh ext/util/make_ext clean $$x ; \
+ done
+ rm -f perl suidperl miniperl $(perllib)
realclean: clean
- cd x2p; $(MAKE) realclean
- rm -f *.orig */*.orig *~ */*~ core $(addedbyconf) h2ph h2ph.man
- rm -f perly.h t/perl Makefile config.h makedepend makedir
- rm -f makefile x2p/Makefile x2p/makefile cflags x2p/cflags
- rm -f c2ph pstruct
+ -cd os2; rm -f Makefile
+ -cd pod; $(MAKE) realclean
+ -cd utils; $(MAKE) realclean
+ -cd x2p; $(MAKE) realclean
+ -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
+ sh ext/util/make_ext realclean $$x ; \
+ done
+ rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
+ rm -rf $(addedbyconf)
+ rm -f makefile makefile.old
+ rm -f $(private)
+ rm -rf lib/auto
+ rm -f lib/.exists
+ rm -f h2ph.man pstruct
+ rm -rf .config
+ @echo "Note that make realclean does not delete config.sh"
+
+clobber: realclean
+ rm -f config.sh cppstdin
+
+distclean: clobber
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+makefile: Makefile
+ $(MAKE) depend
+
+config.h: config.sh
+ /bin/sh config_h.SH
+
+# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
- - test -f perly.h || cp /dev/null perly.h
./makedepend
- - test -s perly.h || /bin/rm -f perly.h
+ - test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
-test: perl
+test: miniperl perl preplibrary $(dynamic_ext)
+ - cd t && chmod +x TEST */*.t
+ - cd t && (rm -f perl; $(LNS) ../perl perl) && ./perl TEST </dev/tty
+
+minitest: miniperl
- cd t && chmod +x TEST */*.t
- - cd t && (rm -f perl; $(SLN) ../perl perl) && ./perl TEST </dev/tty
+ - cd t && (rm -f perl; $(LNS) ../miniperl perl) \
+ && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
-clist:
+clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
-hlist:
+hlist: $(h)
echo $(h) | tr ' ' '\012' >.hlist
-shlist:
+shlist: $(sh)
echo $(sh) | tr ' ' '\012' >.shlist
+pllist: $(pl)
+ echo $(pl) | tr ' ' '\012' >.pllist
+
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
-$eunicefix Makefile4
+$eunicefix Makefile
case `pwd` in
*SH)
- $rm -f ../Makefile4
- ln Makefile4 ../Makefile4
+ $rm -f ../Makefile
+ ln Makefile ../Makefile
;;
esac
rm -f makefile
https://perl5.git.perl.org / perl5.git / blobdiff