'') perladmin='$perladmin' ;;
esac
-# Installation prefix. Allow a Configure -D override. You
+# Installation prefixes. Allow a Configure -D override. You
# may wish to reinstall perl under a different prefix, perhaps
# in order to test a different configuration.
+# For an explanation of the installation directories, see the
+# INSTALL file section on "Installation Directories".
case "\$prefix" in
'') prefix='$prefix' ;;
esac
+case "\$siteprefix" in
+'') siteprefix='$siteprefix' ;;
+esac
+case "\$vendorprefix" in
+'') vendorprefix='$vendorprefix' ;;
+esac
+
+# Where installperl puts things.
+case "\$installprefix" in
+'') installprefix='$installprefix' ;;
+esac
# Installation directives. Note that each one comes in three flavors.
# For example, we have privlib, privlibexp, and installprivlib.
# out automatically by Configure, so you don't have to include it here.
# installprivlib is for systems (such as those running AFS) that
# need to distinguish between the place where things
-# get installed and where they finally will reside.
+# get installed and where they finally will reside. As of 5.005_6x,
+# this too is handled automatically by Configure based on
+# $installprefix, so it isn't included here either.
+#
+# Note also that there are three broad hierarchies of installation
+# directories, as discussed in the INSTALL file under
+# "Installation Directories":
+#
+# =item Directories for the perl distribution
+#
+# =item Directories for site-specific add-on files
+#
+# =item Directories for vendor-supplied add-on files
+#
+# See Porting/Glossary for the definitions of these names, and see the
+# INSTALL file for further explanation and some examples.
#
# In each case, if your previous value was the default, leave it commented
# out. That way, if you override prefix, all of these will be
!GROK!THIS!
-for var in bin scriptdir privlib archlib \
- man1dir man3dir sitelib sitearch \
- installbin installscript installprivlib installarchlib \
- installman1dir installman3dir installsitelib installsitearch \
- man1ext man3ext; do
+for var in \
+ bin scriptdir privlib archlib man1dir man3dir html1dir html3dir \
+ sitebin sitescript sitelib sitearch \
+ siteman1 siteman3 sitehtml1 sitehtml3 \
+ vendorbin vendorscript vendorlib vendorarch \
+ vendorman1 vendorman3 vendorhtml1 vendorhtml3
+do
case "$var" in
+
+ # Directories for the core perl components
bin) dflt=$prefix/bin ;;
# The scriptdir test is more complex, but this is probably usually ok.
scriptdir)
*) dflt=$prefix/lib/$package/$version ;;
esac
;;
- archlib)
- case "$prefix" in
- *perl*) dflt=$prefix/lib/$version/$archname ;;
- *) dflt=$prefix/lib/$package/$version/$archname ;;
- esac
+ archlib) dflt="$privlib/$archname" ;;
+
+ man1dir) dflt="$prefix/man/man1" ;;
+ man3dir) dflt="$prefix/man/man3" ;;
+ # Can we assume all sed's have greedy matching?
+ man1ext) dflt=`echo $man1dir | sed -e 's!.*man!!' -e 's!^\.!!'` ;;
+ man3ext) dflt=`echo $man3dir | sed -e 's!.*man!!' -e 's!^\.!!'` ;;
+
+ # We don't know what to do with these yet.
+ html1dir) dflt='' ;;
+ htm31dir) dflt='' ;;
+
+ # Directories for site-specific add-on files
+ sitebin) dflt=$siteprefix/bin ;;
+ sitescript)
+ if $test -d $siteprefix/script; then
+ dflt=$siteprefix/script
+ else
+ dflt=$sitebin
+ fi
;;
sitelib)
- case "$prefix" in
- *perl*) dflt=$prefix/lib/site_perl/$apiversion ;;
- *) dflt=$prefix/lib/$package/site_perl/$apiversion ;;
- esac
- ;;
- sitearch)
- case "$prefix" in
- *perl*) dflt=$prefix/lib/site_perl/$apiversion/$archname ;;
- *) dflt=$prefix/lib/$package/site_perl/$apiversion/$archname ;;
- esac
- ;;
- man1dir) dflt="$prefix/man/man1" ;;
- man3dir)
- case "$prefix" in
- *perl*) dflt=`echo $man1dir |
- sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
- *) dflt=$privlib/man/man3 ;;
+ case "$siteprefix" in
+ *perl*) dflt=$prefix/lib/site_perl/$version ;;
+ *) dflt=$prefix/lib/$package/site_perl/$version ;;
esac
;;
+ sitearch) dflt="$sitelib/$archname" ;;
- # Can we assume all sed's have greedy matching?
- man1ext) dflt=`echo $man1dir | sed -e 's!.*man!!' -e 's!^\.!!'` ;;
- man3ext) dflt=`echo $man3dir | sed -e 's!.*man!!' -e 's!^\.!!'` ;;
+ siteman1) dflt="$siteprefix/man/man1" ;;
+ siteman3) dflt="$siteprefix/man/man3" ;;
+ # We don't know what to do with these yet.
+ sitehtml1) dflt='' ;;
+ sitehtm31dir) dflt='' ;;
+
+ # Directories for vendor-supplied add-on files
+ # These are all usually empty.
+ vendor*)
+ if test X"$vendorprefix" = X""; then
+ dflt=''
+ else
+ case "$var" in
+ vendorbin) dflt=$vendorprefix/bin ;;
+ vendorscript)
+ if $test -d $vendorprefix/script; then
+ dflt=$vendorprefix/script
+ else
+ dflt=$vendorbin
+ fi
+ ;;
+ vendorlib)
+ case "$vendorprefix" in
+ *perl*) dflt=$prefix/lib/vendor_perl/$version ;;
+ *) dflt=$prefix/lib/$package/vendor_perl/$version ;;
+ esac
+ ;;
+ vendorarch) dflt="$vendorlib/$archname" ;;
- # It might be possible to fool these next tests. Please let
- # me know if they don't work right for you.
- installbin) dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- installscript) dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- installprivlib) dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- installarchlib) dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- installsitelib) dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
- installsitearch) dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
- installman1dir) dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
- installman3dir) dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
+ vendorman1) dflt="$vendorprefix/man/man1" ;;
+ vendorman3) dflt="$vendorprefix/man/man3" ;;
+ # We don't know what to do with these yet.
+ vendorhtml1) dflt='' ;;
+ vendorhtm3) dflt='' ;;
+
+ esac # End of vendorprefix != ''
+ fi
+ ;;
esac
eval val="\$$var"
# The original design for this Policy.sh file came from Wayne Davison,
# maintainer of trn.
# This version for Perl5.004_61 originally written by
-# Andy Dougherty <doughera@lafcol.lafayette.edu>.
+# Andy Dougherty <doughera@lafayette.edu>.
# This file may be distributed under the same terms as Perl itself.
-
https://perl5.git.perl.org / perl5.git / blobdiff