This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Skip obsoleted interfaces.
[perl5.git] / op.h
diff --git a/op.h b/op.h
index 352d358..da59e44 100644 (file)
--- a/op.h
+++ b/op.h
@@ -1,6 +1,6 @@
 /*    op.h
  *
- *    Copyright (c) 1991-2001, Larry Wall
+ *    Copyright (c) 1991-2002, Larry Wall
  *
  *    You may distribute under the terms of either the GNU General Public
  *    License or the Artistic License, as specified in the README file.
  *                     which may or may not check number of children).
  */
 
-typedef U32 PADOFFSET;
+#if PTRSIZE == 4
+typedef U32TYPE PADOFFSET;
+#else
+#   if PTRSIZE == 8
+typedef U64TYPE PADOFFSET;
+#   endif
+#endif
 #define NOT_IN_PAD ((PADOFFSET) -1)
 
 #ifdef DEBUGGING_OPS
@@ -53,6 +59,8 @@ typedef U32 PADOFFSET;
         dfl)
 
 /*
+=head1 "Gimme" Values
+
 =for apidoc Amn|U32|GIMME_V
 The XSUB-writer's equivalent to Perl's C<wantarray>.  Returns C<G_VOID>,
 C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
@@ -96,6 +104,8 @@ Deprecated.  Use C<GIMME_V> instead.
                                /*  On OP_ENTERITER, loop var is per-thread */
                                /*  On pushre, re is /\s+/ imp. by split " " */
                                /*  On regcomp, "use re 'eval'" was in scope */
+                               /*  On OP_READLINE, was <$filehandle> */
+                               /*  On RV2[SG]V, don't create GV--in defined()*/
 
 /* old names; don't use in new code, but don't break them, either */
 #define OPf_LIST       OPf_WANT_LIST
@@ -147,6 +157,7 @@ Deprecated.  Use C<GIMME_V> instead.
   /* OP_ENTERSUB only */
 #define OPpENTERSUB_DB         16      /* Debug subroutine. */
 #define OPpENTERSUB_HASTARG    32      /* Called from OP tree. */
+#define OPpENTERSUB_NOMOD      64      /* Immune to mod() for :attrlist. */
   /* OP_RV2CV only */
 #define OPpENTERSUB_AMPER      8       /* Used & form to call. */
 #define OPpENTERSUB_NOPAREN    128     /* bare sub call (without parens) */
@@ -166,7 +177,6 @@ Deprecated.  Use C<GIMME_V> instead.
 #define OPpTARGET_MY           16      /* Target is PADMY. */
 
 /* Private for OP_CONST */
-#define        OPpCONST_OCTAL          4       /* Octal constant. */
 #define        OPpCONST_STRICT         8       /* bearword subject to strict 'subs' */
 #define OPpCONST_ENTERED       16      /* Has been entered as symbol. */
 #define OPpCONST_ARYBASE       32      /* Was a $[ translated to constant. */
@@ -198,7 +208,8 @@ Deprecated.  Use C<GIMME_V> instead.
 #define OPpOPEN_OUT_RAW                64      /* binmode(F,":raw") on output fh */
 #define OPpOPEN_OUT_CRLF       128     /* binmode(F,":crlf") on output fh */
 
-/* Private for OP_EXIT */
+/* Private for OP_EXIT, HUSH also for OP_DIE */
+#define OPpHUSH_VMSISH         64      /* hush DCL exit msg vmsish mode*/
 #define OPpEXIT_VMSISH         128     /* exit(0) vs. exit(1) vmsish mode*/
 
 struct op {
@@ -236,7 +247,7 @@ struct pmop {
     OP *       op_pmreplstart;
     PMOP *     op_pmnext;              /* list of all scanpats */
 #ifdef USE_ITHREADS
-    I32         op_pmoffset;
+    I         op_pmoffset;
 #else
     REGEXP *    op_pmregexp;            /* compiled expression */
 #endif
@@ -251,11 +262,15 @@ struct pmop {
 };
 
 #ifdef USE_ITHREADS
-#define PM_GETRE(o)     ((REGEXP*)SvIV(PL_regex_pad[(o)->op_pmoffset]))
-#define PM_SETRE(o,r)   (sv_setiv(PL_regex_pad[(o)->op_pmoffset], (IV)r))
+#define PM_GETRE(o)     (INT2PTR(REGEXP*,SvIVX(PL_regex_pad[(o)->op_pmoffset])))
+#define PM_SETRE(o,r)   (sv_setiv(PL_regex_pad[(o)->op_pmoffset], PTR2IV(r)))
+#define PM_GETRE_SAFE(o) (PL_regex_pad ? PM_GETRE(o) : (REGEXP*)0)
+#define PM_SETRE_SAFE(o,r) if (PL_regex_pad) PM_SETRE(o,r)
 #else
 #define PM_GETRE(o)     ((o)->op_pmregexp)
 #define PM_SETRE(o,r)   ((o)->op_pmregexp = (r))
+#define PM_GETRE_SAFE PM_GETRE
+#define PM_SETRE_SAFE PM_SETRE
 #endif
 
 #define PMdf_USED      0x01            /* pm has been used once already */
@@ -286,17 +301,21 @@ struct pmop {
 #define PMf_COMPILETIME        (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED)
 
 #ifdef USE_ITHREADS
+
 #  define PmopSTASHPV(o)       ((o)->op_pmstashpv)
-#  define PmopSTASHPV_set(o,pv)        ((o)->op_pmstashpv = ((pv) ? savepv(pv) : Nullch))
+#  define PmopSTASHPV_set(o,pv)        (PmopSTASHPV(o) = savesharedpv(pv))
 #  define PmopSTASH(o)         (PmopSTASHPV(o) \
                                 ? gv_stashpv(PmopSTASHPV(o),GV_ADD) : Nullhv)
-#  define PmopSTASH_set(o,hv)  PmopSTASHPV_set(o, (hv) ? HvNAME(hv) : Nullch)
+#  define PmopSTASH_set(o,hv)  PmopSTASHPV_set(o, ((hv) ? HvNAME(hv) : Nullch))
+#  define PmopSTASH_free(o)    PerlMemShared_free(PmopSTASHPV(o))
+
 #else
 #  define PmopSTASH(o)         ((o)->op_pmstash)
 #  define PmopSTASH_set(o,hv)  ((o)->op_pmstash = (hv))
 #  define PmopSTASHPV(o)       (PmopSTASH(o) ? HvNAME(PmopSTASH(o)) : Nullch)
    /* op_pmstash is not refcounted */
 #  define PmopSTASHPV_set(o,pv)        PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
+#  define PmopSTASH_free(o)    
 #endif
 
 struct svop {
@@ -456,3 +475,27 @@ struct loop {
 #define PERL_LOADMOD_DENY              0x1
 #define PERL_LOADMOD_NOIMPORT          0x2
 #define PERL_LOADMOD_IMPORT_OPS                0x4
+
+#ifdef USE_REENTRANT_API
+
+typedef struct {
+  struct tm* tmbuf;
+} REENTBUF;
+
+#define localtime(a)       (localtime_r((a),PL_reentrant_buffer->tmbuf) ? PL_reentrant_buffer->tmbuf : NULL)
+#define gmtime(a)          (gmtime_r((a),PL_reentrant_buffer->tmbuf) ?  PL_reentrant_buffer->tmbuf : NULL)
+
+#ifdef OLD_PTHREADS_API
+
+/* HP-UX 10.20 returns 0 on success, what it returns on failure is hidden
+   in the fog somewhere, possibly -1 which means the following should do 
+   the right thing - 20010816 sky */
+
+#undef localtime
+#undef gmtime
+#define localtime(a)       ((localtime_r((a),PL_reentrant_buffer->tmbuf) == 0) ? PL_reentrant_buffer->tmbuf : NULL)
+#define gmtime(a)          ((gmtime_r((a),PL_reentrant_buffer->tmbuf) == 0) ? PL_reentrant_buffer->tmbuf : NULL)
+#endif /* HP-UX 10.20 */
+
+#endif
+