This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Start using the Unicode 3.2.0 data (NOTE: still
[perl5.git] / pod / perldelta.pod
index 8a17974..1323772 100644 (file)
@@ -4,18 +4,58 @@ perldelta - what is new for perl v5.8.0
 
 =head1 DESCRIPTION
 
-This document describes differences between the 5.6.0 release and the
-5.8.0 release.
+This document describes differences between the 5.6.0 release
+and the 5.8.0 release.
+
+Many of the bug fixes in 5.8.0 were already seen in the 5.6.1
+maintenance release since the two releases were kept closely
+coordinated.
+
+If you are upgrading from Perl 5.005_03, you might also want
+to read L<perl56delta>.
+
+=head1 Highlights In 5.8.0
+
+=over 4
+
+=item *
+
+Better Unicode support
+
+=item *
+
+New Thread Implementation
+
+=item *
+
+Many New Modules
+
+=item *
+
+Better Numeric Accuracy
+
+=item *
+
+Safe Signals
+
+=item *
+
+More Extensive Regression Testing
+
+=back
 
 =head1 Incompatible Changes
 
 =head2 64-bit platforms and malloc
 
-If your pointers are 64 bits wide, the Perl malloc is no more being
-used because it simply does not work with 8-byte pointers.  Also,
+If your pointers are 64 bits wide, the Perl malloc is no longer being
+used because it does not work well with 8-byte pointers.  Also,
 usually the system mallocs on such platforms are much better optimized
-for such large memory models than the Perl malloc.  Such platforms
-include 64-bit Alpha, MIPS, HPPA, PPC, and Sparc.
+for such large memory models than the Perl malloc.  Some memory-hungry
+Perl applications like the PDL don't work well with Perl's malloc.
+Finally, other applications than Perl (like modperl) tend to prefer
+the system malloc.  Such platforms include Alpha and 64-bit HPPA,
+MIPS, PPC, and Sparc.
 
 =head2 AIX Dynaloading
 
@@ -25,6 +65,15 @@ change will probably break backward compatibility with compiled
 modules.  The change was made to make Perl more compliant with other
 applications like modperl which are using the AIX native interface.
 
+=head2 Attributes for C<my> variables now handled at run-time.
+
+The C<my EXPR : ATTRS> syntax now applies variable attributes at
+run-time.  (Subroutine and C<our> variables still get attributes applied
+at compile-time.)  See L<attributes> for additional details.  In particular,
+however, this allows variable attributes to be useful for C<tie> interfaces,
+which was a deficiency of earlier releases.  Note that the new semantics
+doesn't work with the Attribute::Handlers module (as of version 0.76).
+
 =head2 Socket Extension Dynamic in VMS
 
 The Socket extension is now dynamically loaded instead of being
@@ -32,60 +81,53 @@ statically built in.  This may or may not be a problem with ancient
 TCP/IP stacks of VMS: we do not know since we weren't able to test
 Perl in such configurations.
 
-=head2 Different Definition of the Unicode Character Classes \p{In...}
+=head2 IEEE-format Floating Point Default on OpenVMS Alpha
 
-As suggested by the Unicode consortium, the Unicode character classes
-now prefer I<scripts> as opposed to I<blocks> (as defined by Unicode);
-in Perl, when the C<\p{In....}> and the C<\p{In....}> regular expression
-constructs are used.  This has changed the definition of some of those
-character classes.
+Perl now uses IEEE format (T_FLOAT) as the default internal floating
+point format on OpenVMS Alpha, potentially breaking binary compatibility
+with external libraries or existing data.  G_FLOAT is still available as
+a configuration option.  The default on VAX (D_FLOAT) has not changed.
 
-The difference between scripts and blocks is that scripts are the
-glyphs used by a language or a group of languages, while the blocks
-are more artificial groupings of 256 characters based on the Unicode
-numbering.
+=head2 New Unicode Properties
 
-In general this change results in more inclusive Unicode character
-classes, but changes to the other direction also do take place:
-for example while the script C<Latin> includes all the Latin
-characters and their various diacritic-adorned versions, it
-does not include the various punctuation or digits (since they
-are not solely C<Latin>).
+Unicode I<scripts> are now supported. Scripts are similar to (and superior
+to) Unicode I<blocks>. The difference between scripts and blocks is that
+scripts are the glyphs used by a language or a group of languages, while
+the blocks are more artificial groupings of (mostly) 256 characters based
+on the Unicode numbering.
 
-Changes in the character class semantics may have happened if a script
-and a block happen to have the same name, for example C<Hebrew>.
-In such cases the script wins and C<\p{InHebrew}> now means the script
-definition of Hebrew.  The block definition in still available,
-though, by appending C<Block> to the name: C<\p{InHebrewBlock}> means
-what C<\p{InHebrew}> meant in perl 5.6.0.  For the full list
-of affected character classes, see L<perlunicode/Blocks>.
+In general, scripts are more inclusive, but not universally so. For
+example, while the script C<Latin> includes all the Latin characters and
+their various diacritic-adorned versions, it does not include the various
+punctuation or digits (since they are not solely C<Latin>).
 
-=head2 Perl Parser Stress Tested
+A number of other properties are now supported, including C<\p{L&}>,
+C<\p{Any}> C<\p{Assigned}>, C<\p{Unassigned}>, C<\p{Blank}> and
+C<\p{SpacePerl}> (along with their C<\P{...}> versions, of course).
+See L<perlunicode> for details, and more additions.
 
-The Perl parser has been stress tested using both random input and
-Markov chain input and the few found crashes and lockups have been
-fixed.
+The C<In> or C<Is> prefix to names used with the C<\p{...}> and C<\P{...}>
+are now almost always optional. The only exception is that a C<In> prefix
+is required to signify a Unicode block when a block name conflicts with a
+script name. For example, C<\p{Tibetan}> refers to the script, while
+C<\p{InTibetan}> refers to the block. When there is no name conflict, you
+can omit the C<In> from the block name (e.g. C<\p{BraillePatterns}>), but
+to be safe, it's probably best to always use the C<In>).
 
-=head2 Deprecations
+=head2 REF(...) Instead Of SCALAR(...)
 
-The current user-visible implementation of pseudo-hashes (the weird
-use of the first array element) is deprecated starting from Perl 5.8.0
-and will be removed in Perl 5.10.0, and the feature will be
-implemented differently.  Not only is the current interface rather
-ugly, but the current implementation slows down normal array and hash
-use quite noticeably. The C<fields> pragma interface will remain
-available.
+A reference to a reference now stringifies as "REF(0x81485ec)" instead
+of "SCALAR(0x81485ec)" in order to be more consistent with the return
+value of ref().
 
-The syntaxes C<@a->[...]> and  C<@h->{...}> have now been deprecated.
+=head2 pack/unpack D/F recycled
 
-After years of trying the suidperl is considered to be too complex to
-ever be considered truly secure.  The suidperl functionality is likely
-to be removed in a future release.
+The undocumented pack/unpack template letters D/F have been recycled
+for better use: now they stand for long double (if supported by the
+platform) and NV (Perl internal floating point type).  (They used
+to be aliases for d/f, but you never knew that.)
 
-The C<package;> syntax (C<package> without an argument has been
-deprecated.  Its semantics were never that clear and its
-implementation even less so.  If you have used that feature to
-disallow all but fully qualified variables, C<use strict;> instead.
+=head2 Deprecations
 
 =over 4
 
@@ -96,9 +138,15 @@ it to make some sense, it is forbidden.
 
 =item *
 
-A reference to a reference now stringify as "REF(0x81485ec)" instead
-of "SCALAR(0x81485ec)" in order to be more consistent with the return
-value of ref().
+The obsolete chat2 library that should never have been allowed
+to escape the laboratory has been decommissioned.
+
+=item *
+
+The builtin dump() function has probably outlived most of its
+usefulness.  The core-dumping functionality will remain in future
+available as an explicit call to C<CORE::dump()>, but in future
+releases the behaviour of an unqualified C<dump()> call may change.
 
 =item *
 
@@ -109,8 +157,40 @@ maintained.
 
 =item *
 
-The obsolete chat2 library that should never have been allowed
-to escape the laboratory has been decommissioned.
+The (bogus) escape sequences \8 and \9 now give an optional warning
+("Unrecognized escape passed through").  There is no need to \-escape
+any C<\w> character.
+
+=item *
+
+The list of filenames from glob() (or <...>) is now by default sorted
+alphabetically to be csh-compliant (which is what happened before
+in most UNIX platforms).  (bsd_glob() does still sort platform
+natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.)
+
+=item *
+
+Spurious syntax errors generated in certain situations, when glob()
+caused File::Glob to be loaded for the first time, have been fixed.
+
+=item *
+
+Although "you shouldn't do that", it was possible to write code that
+depends on Perl's hashed key order (Data::Dumper does this).  The new
+algorithm "One-at-a-Time" produces a different hashed key order.
+More details are in L</"Performance Enhancements">.
+
+=item *
+
+lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
+In future releases this may become a fatal error.
+
+=item *
+
+The C<package;> syntax (C<package> without an argument) has been
+deprecated.  Its semantics were never that clear and its
+implementation even less so.  If you have used that feature to
+disallow all but fully qualified variables, C<use strict;> instead.
 
 =item *
 
@@ -121,25 +201,29 @@ since it, in a way, falsely promised that the features could be used.
 
 =item *
 
-The (bogus) escape sequences \8 and \9 now give an optional warning
-("Unrecognized escape passed through").  There is no need to \-escape
-any C<\w> character.
+The current user-visible implementation of pseudo-hashes (the weird
+use of the first array element) is deprecated starting from Perl 5.8.0
+and will be removed in Perl 5.10.0, and the feature will be
+implemented differently.  Not only is the current interface rather
+ugly, but the current implementation slows down normal array and hash
+use quite noticeably. The C<fields> pragma interface will remain
+available.  The I<restricted hashes> interface is expected to
+be the replacement interface (see L<Hash::Util>).
 
 =item *
 
-lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
-In future releases this may become a fatal error.
+The syntaxes C<< @a->[...] >> and  C<< %h->{...} >> have now been deprecated.
 
 =item *
 
-The long deprecated uppercase aliases for the string comparison
-operators (EQ, NE, LT, LE, GE, GT) have now been removed.
+After years of trying the suidperl is considered to be too complex to
+ever be considered truly secure.  The suidperl functionality is likely
+to be removed in a future release.
 
 =item *
 
-The regular expression captured submatches ($1, $2, ...) are now
-more consistently unset if the match fails, instead of leaving false
-data lying around in them.
+The long deprecated uppercase aliases for the string comparison
+operators (EQ, NE, LT, LE, GE, GT) have now been removed.
 
 =item *
 
@@ -149,26 +233,15 @@ functionality, see pack('U0', ...) and pack('C0', ...).
 
 =item *
 
-Although "you shouldn't do that", it was possible to write code that
-depends on Perl's hashed key order (Data::Dumper does this).  The new
-algorithm "One-at-a-Time" produces a different hashed key order.
-More details are in L</"Performance Enhancements">.
-
-=item *
-
-The list of filenames from glob() (or <...>) is now by default sorted
-alphabetically to be csh-compliant.  (bsd_glob() does still sort platform
-natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.)
+Earlier Perls treated "sub foo (@bar)" as equivalent to "sub foo (@)".
+The prototypes are now checked at compile-time for invalid characters.
+An optional warning is generated ("Illegal character in prototype...")
+but this may be upgraded to a fatal error in a future release.
 
 =back
 
 =head1 Core Enhancements
 
-=head2 AUTOLOAD Is Now Lvaluable
-
-AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute
-to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value.
-
 =head2 PerlIO is Now The Default
 
 =over 4
@@ -241,65 +314,62 @@ the child process.
 
 =item *
 
-The following builtin functions are now overridable: chop(), chomp(),
-each(), keys(), pop(), push(), shift(), splice(), unshift().
-
-=item *
-
-Formats now support zero-padded decimal fields.
-
-=item *
-
-Perl now tries internally to use integer values in numeric conversions
-and basic arithmetics (+ - * /) if the arguments are integers, and
-tries also to keep the results stored internally as integers.
-This change leads into often slightly faster and always less lossy
-arithmetics. (Previously Perl always preferred floating point numbers
-in its math.)
+If your locale environment variables (LANGUAGE, LC_ALL, LC_CTYPE, LANG)
+contain the strings 'UTF-8' or 'UTF8' (case-insensitive matching),
+the default encoding of your STDIN, STDOUT, and STDERR, and of
+B<any subsequent file open>, is UTF-8.
 
-=item *
+=back
 
-The printf() and sprintf() now support parameter reordering using the
-C<%\d+\$> and C<*\d+\$> syntaxes.  For example
+=head2 Safe Signals
 
-    print "%2\$s %1\$s\n", "foo", "bar";
+Perl used to be fragile in that signals arriving at inopportune moments
+could corrupt Perl's internal state.  Now Perl postpones handling of
+signals until it's safe (between opcodes).
+
+This change may have surprising side effects because signals no longer
+interrupt Perl instantly.  Perl will now first finish whatever it was
+doing, like finishing an internal operation (like sort()) or an
+external operation (like an I/O operation), and only then look at any
+arrived signals (and before starting the next operation).  No more corrupt
+internal state since the current operation is always finished first,
+but the signal may take more time to get heard.  Note that breaking
+out from potentially blocking operations should still work, though.
+
+=head2 Unicode Overhaul
+
+Unicode in general should be now much more usable than in Perl 5.6.0
+(or even in 5.6.1).  Unicode can be used in hash keys, Unicode in
+regular expressions should work now, Unicode in tr/// should work now,
+Unicode in I/O should work now.  See L<perluniintro> for introduction
+and L<perlunicode> for details.
 
-will print "bar foo\n"; This feature helps in writing
-internationalised software.
+=over 4
 
 =item *
 
-Unicode in general should be now much more usable.  Unicode can be
-used in hash keys, Unicode in regular expressions should work now,
-Unicode in tr/// should work now (though tr/// seems to be a
-particularly tricky to get right, so you have been warned)
+The Unicode Character Database coming with Perl has been upgraded
+to Unicode 3.2.0.  For more information, see http://www.unicode.org/ .
 
 =item *
 
-The Unicode Character Database coming with Perl has been upgraded
-to Unicode 3.1.  For more information, see http://www.unicode.org/,
-and http://www.unicode.org/unicode/reports/tr27/
-
 For developers interested in enhancing Perl's Unicode capabilities:
 almost all the UCD files are included with the Perl distribution in
-the lib/unicode subdirectory.  The most notable omission, for space
+the F<lib/unicore subdirectory>.  The most notable omission, for space
 considerations, is the Unihan database.
 
 =item *
 
-The Unicode character classes \p{Blank} and \p{SpacePerl} have been
-added.  "Blank" is like C isblank(), that is, it contains only
-"horizontal whitespace" (the space character is, the newline isn't),
-and the "SpacePerl" is the Unicode equivalent of C<\s> (\p{Space}
-isn't, since that includes the vertical tabulator character, whereas
-C<\s> doesn't.)
+The properties \p{Blank} and \p{SpacePerl} have been added. "Blank" is like
+C isblank(), that is, it contains only "horizontal whitespace" (the space
+character is, the newline isn't), and the "SpacePerl" is the Unicode
+equivalent of C<\s> (\p{Space} isn't, since that includes the vertical
+tabulator character, whereas C<\s> doesn't.)
 
-=back
-
-=head2 Signals Are Now Safe
+See "New Unicode Properties" earlier in this document for additional
+information on changes with Unicode properties.
 
-Perl used to be fragile in that signals arriving at inopportune moments
-could corrupt Perl's internal state.
+=back
 
 =head2 Understanding of Numbers
 
@@ -309,15 +379,46 @@ many systems the standard number parsing functions like C<strtoul()>
 and C<atof()> seem to have bugs, Perl tries to work around their
 deficiencies.  This results hopefully in more accurate numbers.
 
+Perl now tries internally to use integer values in numeric conversions
+and basic arithmetics (+ - * /) if the arguments are integers, and
+tries also to keep the results stored internally as integers.
+This change leads to often slightly faster and always less lossy
+arithmetics. (Previously Perl always preferred floating point numbers
+in its math.)
+
+=head2 Miscellaneous Changes
+
 =over 4
 
 =item *
 
+AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute
+to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value.
+
+=item *
+
 C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass
 in multiple arguments.)
 
 =item *
 
+The builtin dump() now gives an optional warning
+C<dump() better written as CORE::dump()>,
+meaning that by default C<dump(...)> is resolved as the builtin 
+dump() which dumps core and aborts, not as (possibly) user-defined
+C<sub dump>.  To call the latter, qualify the call as C<&dump(...)>.
+(The whole dump() feature is to considered deprecated, and possibly
+removed/changed in future releases.)
+
+=item *
+
+chomp() and chop() are now overridable.  Note, however, that their
+prototype (as given by C<prototype("CORE::chomp")> is undefined,
+because it cannot be expressed and therefore one cannot really write
+replacements to override these builtins.
+
+=item *
+
 END blocks are now run even if you exit/die in a BEGIN block.
 Internally, the execution of END blocks is now controlled by 
 PL_exit_flags & PERL_EXIT_DESTRUCT_END. This enables the new
@@ -326,18 +427,17 @@ L<perlembed>.
 
 =item *
 
-Lexicals I: lexicals outside an eval "" weren't resolved
-correctly inside a subroutine definition inside the eval "" if they
-were not already referenced in the top level of the eval""ed code.
+Formats now support zero-padded decimal fields.
 
 =item *
 
-Lexicals II: lexicals leaked at file scope into subroutines that
-were declared before the lexicals.
+Lvalue subroutines can now return C<undef> in list context.
+However, the lvalue subroutine feature still remains experimental.
 
 =item *
 
-Lvalue subroutines can now return C<undef> in list context.
+A lost warning "Can't declare ... dereference in my" has been
+restored (Perl had it earlier but it became lost in later releases.)
 
 =item *
 
@@ -355,6 +455,22 @@ is a NaN.  Previously the behaviour was unspecified.
 
 =item *
 
+The following builtin functions are now overridable: each(), keys(),
+pop(), push(), shift(), splice(), unshift().
+
+=item *
+
+C<pack() / unpack()> now can group template letters with C<()> and then
+apply repetition/count modifiers on the groups.
+
+=item *
+
+C<pack() / unpack()> can now process the Perl internal numeric types:
+IVs, UVs, NVs-- and also long doubles, if supported by the platform.
+The template letters are C<j>, C<J>, C<F>, and C<D>.
+
+=item *
+
 C<pack('U0a*', ...)> can now be used to force a string to UTF8.
 
 =item *
@@ -363,12 +479,55 @@ my __PACKAGE__ $obj now works.
 
 =item *
 
+The printf() and sprintf() now support parameter reordering using the
+C<%\d+\$> and C<*\d+\$> syntaxes.  For example
+
+    print "%2\$s %1\$s\n", "foo", "bar";
+
+will print "bar foo\n".  This feature helps in writing
+internationalised software, and in general when the order
+of the parameters can vary.
+
+=item *
+
 prototype(\&) is now available.
 
 =item *
 
-Right-hand side magic (GMAGIC) could in many cases such as string
-concatenation be invoked too many times.
+prototype(\[$@%&]) is now available to implicitly create references
+(useful for example if you want to emulate the tie() interface).
+
+=item *
+
+A new command-line option, C<-t> is available.  It is the
+little brother of C<-T>: instead of dieing on taint violations,
+lexical warnings are given.  B<This is only meant as a temporary
+debugging aid while securing the code of old legacy applications.
+This is not a substitute for -T.>
+
+=item *
+
+In other taint news, the C<exec LIST> and C<system LIST> have now been
+considered too risky (think C<exec @ARGV>: it can start any program
+with any arguments), and now the said forms cause a warning.
+You should carefully launder the arguments to guarantee their
+validity.  In future releases of Perl the forms will become fatal
+errors so consider starting laundering now.
+
+=item *
+
+If tr/// is just counting characters, it doesn't attempt to
+modify its target.
+
+=item *
+
+untie() will now call an UNTIE() hook if it exists.  See L<perltie>
+for details.
+
+=item *
+
+L<utime> now supports C<utime undef, undef, @files> to change the
+file timestamps to the current time.
 
 =item *
 
@@ -378,16 +537,23 @@ simply B<between digits>.
 
 =item *
 
-An UNTIE method is now available.
+Rather than relying on C's argv[0] (which may not contain a full pathname)
+where possible $^X is now set by asking the operating system.
+(eg by reading F</proc/self/exe> on Linux, F</proc/curproc/file> on FreeBSD)
 
 =item *
 
-L<utime> now supports C<utime undef, undef, @files> to change the
-file timestamps to the current time.
+A new variable, C<${^TAINT}>, indicates whether taint mode is enabled.
 
 =item *
 
-C<eval "v200"> now works.
+You can now override the readline() builtin, and this overrides also
+the <FILEHANDLE> angle bracket operator.
+
+=item *
+
+The command-line options -s and -F are now recognized on the shebang
+(#!) line.
 
 =back
 
@@ -421,6 +587,12 @@ output is highly customisable.  See L<B::Concise>.
 
 =item *
 
+The new bignum, bigint, and bigrat pragmas implement transparent
+bignum support (using the Math::BigInt, Math::BigFloat, and
+Math::BigRat backends), by Tels.
+
+=item *
+
 C<Class::ISA> for reporting the search path for a class's ISA tree,
 by Sean Burke, has been added.  See L<Class::ISA>.
 
@@ -432,9 +604,10 @@ but if not possible, the familiar Perl implementation is used.
 
 =item *
 
-C<Devel::PPPort>, from Kenneth Albanowski, has been added.  It is
-primarily used by C<h2xs> to enhance portability of of XS modules
-between different versions of Perl.
+C<Devel::PPPort>, originally from Kenneth Albanowski and now
+maintained by Paul Marquess, has been added.  It is primarily used
+by C<h2xs> to enhance portability of XS modules between different
+versions of Perl.
 
 =item *
 
@@ -453,29 +626,40 @@ RFC 1321, from Gisle Aas, has been added.  See L<Digest::MD5>.
     print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1
 
 NOTE: the C<MD5> backward compatibility module is deliberately not
-included since its use is discouraged.
+included since its further use is discouraged.
 
 =item *
 
-C<Encode>, by Nick Ing-Simmons, provides a mechanism to translate
-between different character encodings.  Support for Unicode,
-ISO-8859-*, ASCII, CP*, KOI8-R, and three variants of EBCDIC are
-compiled in to the module.  Several other encodings (like Japanese,
-Chinese, and MacIntosh encodings) are included and will be loaded at
-runtime.  See L<Encode>.
+C<Encode>, by Nick Ing-Simmons and Dan Kogai, provides a mechanism to
+translate between different character encodings.  Support for Unicode,
+ISO-8859-1, and ASCII are compiled in to the module.  Several other
+encodings (like the rest of the ISO-8859, CP*/Win*, Mac, KOI8-R, three
+variants EBCDIC, Chinese, Japanese, and Korean encodings) are included
+and can be loaded at runtime.  (For space considerations, the largest
+Chinese encodings have been separated into their own CPAN module,
+Encode::HanExtra, which Encode will use if available).  See L<Encode>.
 
 Any encoding supported by Encode module is also available to the
 ":encoding()" layer if PerlIO is used.
 
 =item *
 
+C<Hash::Util> is the interface to the new I<restricted hashes>
+feature.  A restricted hash is restricted to a certain set of keys,
+no keys outside the set can be added.  Also individual keys can be
+restricted so that the key cannot be deleted and the value cannot be
+changed.  (Implemented by Jeffrey Friedl, Nick Ing-Simmons, and
+Michael Schwern.)
+
+=item *
+
 C<I18N::Langinfo> can be use to query locale information.
 See L<I18N::Langinfo>.
 
 =item *
 
 C<I18N::LangTags> has functions for dealing with RFC3066-style
-language tags, by Sean Burke.  See <I18N::LangTags>.
+language tags, by Sean Burke.  See L<I18N::LangTags>.
 
 =item *
 
@@ -524,6 +708,11 @@ frontend Filter::Simple is to be preferred.  See L<Filter::Util::Call>.
 
 =item *
 
+C<if> is a new pragma for conditional inclusion of modules, from
+Ilya Zakharevich.
+
+=item *
+
 L<libnet> is a collection of perl5 modules related to network
 programming, from Graham Barr.  See L<Net::FTP>, L<Net::NNTP>,
 L<Net::Ping>, L<Net::POP3>, L<Net::SMTP>, and L<Net::Time>.
@@ -533,7 +722,7 @@ Perl installation leaves libnet unconfigured, use F<libnetcfg> to configure.
 =item *
 
 C<List::Util> is a selection of general-utility list subroutines, like
-sum(), min(), first(), and shuffle(), by Graham barr.  See L<List::Util>.
+sum(), min(), first(), and shuffle(), by Graham Barr.  See L<List::Util>.
 
 =item *
 
@@ -559,6 +748,11 @@ Journal #13, republished here with kind permission.
 
 =item *
 
+Math::BigRat for big rational numbers, to accompany Math::BigInt and
+Math::BigFloat, from Tels.
+
+=item *
+
 C<Memoize> can make your functions faster by trading space for time,
 from Mark-Jason Dominus.  See L<Memoize>.
 
@@ -594,7 +788,7 @@ MIME::QuotedPrint has been enhanced to provide the basic methods
 necessary to use it with PerlIO::Via as in :
 
     use MIME::QuotedPrint;
-    open($fh,">Via(MIME::QuotedPrint)",$path)
+    open($fh,">Via(MIME::QuotedPrint)",$path);
 
 See L<MIME::QuotedPrint>.
 
@@ -623,7 +817,7 @@ functionality provided by a class (typically implemented in perl
 code), from Nick Ing-Simmons.
 
     use MIME::QuotedPrint;
-    open($fh,">Via(MIME::QuotedPrint)",$path)
+    open($fh,">Via(MIME::QuotedPrint)",$path);
 
 This will automatically convert everything output to C<$fh>
 to Quoted-Printable.  See L<PerlIO::Via>.
@@ -631,7 +825,7 @@ to Quoted-Printable.  See L<PerlIO::Via>.
 =item *
 
 C<Pod::ParseLink>, by Russ Allbery, has been added,
-to parse L<> links in pods as described in the new
+to parse LZ<><> links in pods as described in the new
 perlpodspec.
 
 =item *
@@ -688,7 +882,7 @@ more extensive than Test::Simple, by Michael Schwern.  See L<Test::More>.
 
 =item *
 
-C<Test::Simple> has the- basic utilities for writing tests, by Michael
+C<Test::Simple> has basic utilities for writing tests, by Michael
 Schwern.   See L<Test::Simple>.
 
 =item *
@@ -710,10 +904,10 @@ parsing algorithms.  See L<Text::Balanced>.
 
 =item *
 
-C<threads> is an interface interpreter threads, by Arthur Bergman.
+C<threads> is an interface to interpreter threads, by Arthur Bergman.
 Interpreter threads (ithreads) is the new thread model introduced in
-Perl 5.6 but then available only as an internal interface for
-extension writers.  See L<threads>.
+Perl 5.6 but only available as an internal interface for extension
+writers (and for Win32 Perl for C<fork()> emulation).  See L<threads>.
 
 =item *
 
@@ -724,6 +918,15 @@ where data sharing was implicit.  See L<threads::shared>.
 
 =item *
 
+C<Tie::File>, by Mark-Jason Dominus, associates a Perl array with the
+lines of a file.
+
+=item *
+
+C<Tie::Memoize>, by Ilya Zakharevich, provides on-demand loaded hashes.
+
+=item *
+
 C<Tie::RefHash::Nestable>, by Edward Avis, allows storing hash
 references (unlike the standard Tie::RefHash)  The module is contained
 within Tie::RefHash, see L<Tie::RefHash>.
@@ -774,7 +977,7 @@ The attributes::reftype() now works on tied arguments.
 
 =item *
 
-AutoLoader can now be disabled with C<no AutoLoader;>,
+AutoLoader can now be disabled with C<no AutoLoader;>.
 
 =item *
 
@@ -802,10 +1005,15 @@ using B::Deparse.
 
 =item *
 
+DB_File now supports newer Berkeley DB versions, among
+other improvements.
+
+=item *
+
 The English module can now be used without the infamous performance
 hit by saying
 
-       use English '-no_performance_hit';
+       use English '-no_match_vars';
 
 (Assuming, of course, that one doesn't need the troublesome variables
 C<$`>, C<$&>, or C<$'>.)  Also, introduced C<@LAST_MATCH_START> and
@@ -819,6 +1027,10 @@ This means that they will be more robust and hopefully faster.
 
 =item *
 
+File::Find now chdir()s correctly when chasing symbolic links.
+
+=item *
+
 File::Find now has pre- and post-processing callbacks.  It also
 correctly changes directories when chasing symbolic links.  Callbacks
 (naughtily) exiting with "next;" instead of "return;" now work.
@@ -830,6 +1042,11 @@ more portable.
 
 =item *
 
+The warnings issued by File::Find now belong to their own category.
+You can enable/disable them with C<use/no warnings 'File::Find';>.
+
+=item *
+
 File::Glob::glob() renamed to File::Glob::bsd_glob() to avoid
 prototype mismatch with CORE::glob().
 
@@ -872,16 +1089,25 @@ with 'no lib' now works.
 
 =item *
 
+ExtUtils::MakeMaker now uses File::Spec internally, which hopefully
+leads into better portability.
+
+=item *
+
 Math::BigFloat and Math::BigInt have undergone a full rewrite.
 They are now magnitudes faster, and they support various
 bignum libraries such as GMP and PARI as their backends.
 
 =item *
 
-Net::Ping has been enhanced.  There is now "external" protocol which
-uses Net::Ping::External module which runs external ping(1) and parses
-the output.  An alpha version of Net::Ping::External is available in
-CPAN and in 5.7.2 the Net::Ping::External may be integrated to Perl.
+Math::Complex handles inf, NaN etc., better.
+
+=item *
+
+Net::Ping has been muchly enhanced.  Multihoming is now supported.
+There is now "external" protocol which uses Net::Ping::External module
+which runs external ping(1) and parses the output.  A version of
+Net::Ping::External is available in CPAN.
 
 =item *
 
@@ -891,31 +1117,55 @@ handlers, installing new handlers was not atomic.
 
 =item *
 
-C<%INC> now localised in a Safe compartment so that use/require work.
+In Safe the C<%INC> now localised in a Safe compartment so that
+use/require work.
 
 =item *
 
-The Shell module now has an OO interface.
+In SDBM_File on dosish platforms, some keys went missing because of
+lack of support for files with "holes".  A workaround for the problem
+has been added.
 
 =item *
 
-The Test module has been significantly enhanced.
+In Search::Dict one can now have a pre-processing hook for the
+lines being searched.
 
 =item *
 
-The C<vars> pragma now supports declaring fully qualified variables.
-(Something that C<our()> does not and will not support.)
+The Shell module now has an OO interface.
 
 =item *
 
-The utf8:: name space (as in the pragma) provides various
-Perl-callable functions to provide low level access to Perl's
-internal Unicode representation.  At the moment only length()
-has been implemented.
+In Sys::Syslog there is now a failover mechanism that will go
+through alternative connection mechanisms until the message
+is successfully logged.
 
-=back
+=item *
 
-=head1 Utility Changes
+The Test module has been significantly enhanced.
+
+=item *
+
+Time::Local::timelocal() does not handle fractional seconds anymore.
+The rationale is that neither does localtime(), and timelocal() and
+localtime() are supposed to be inverses of each other.
+
+=item *
+
+The vars pragma now supports declaring fully qualified variables.
+(Something that C<our()> does not and will not support.)
+
+=item *
+
+The C<utf8::> name space (as in the pragma) provides various
+Perl-callable functions to provide low level access to Perl's
+internal Unicode representation.  At the moment only length()
+has been implemented.
+
+=back
+
+=head1 Utility Changes
 
 =over 4
 
@@ -966,11 +1216,12 @@ perl.org, not perl.com.
 
 C<perlcc> has been rewritten and its user interface (that is,
 command line) is much more like that of the UNIX C compiler, cc.
+(The perlbc tools has been removed.  Use C<perlcc -B> instead.)
 
 =item *
 
-C<perlivp> is a new utility for doing Installation Verification
-Procedure after installing Perl.
+C<perlivp> is a new Installation Verification Procedure utility
+for running any time after installing Perl.
 
 =item *
 
@@ -1014,9 +1265,6 @@ perldebtut is a Perl debugging tutorial.
 =item *
 
 perlebcdic contains considerations for running Perl on EBCDIC platforms.
-Note that unfortunately EBCDIC platforms that used to supported back in
-Perl 5.005 are still unsupported by Perl 5.7.0; the plan, however, is to
-bring them back to the fold.  
 
 =item *
 
@@ -1036,22 +1284,21 @@ perlnewmod tells about writing and submitting a new module.
 
 =item *
 
+perlpacktut is a pack() tutorial.
+
+=item *
+
 perlpod has been rewritten to be clearer and to record the best
 practices gathered over the years.
 
 =item *
 
-perlpodstyle is a more formal specification of the pod format,
+perlpodspec is a more formal specification of the pod format,
 mainly of interest for writers of pod applications, not to
 people writing in pod.
 
 =item *
 
-perlposix-bc explains using Perl on the POSIX-BC platform
-(an EBCDIC mainframe platform).
-
-=item *
-
 perlretut is a regular expression tutorial.
 
 =item *
@@ -1070,8 +1317,9 @@ with perltoot in filesystems restricted to "8.3" names)
 
 =item *
 
-perluniintro is an introduction to using Unicode in Perl
-(perlunicode is more of a reference)
+perluniintro is an introduction to using Unicode in Perl.
+(perlunicode is more of a detailed reference and background
+information)
 
 =item *
 
@@ -1110,23 +1358,93 @@ confusion with the perlwin32 documentation on 8.3-restricted filesystems.
 
 =item *
 
-map() that changes the size of the list should now work faster.
-
-=item *
-
-sort() has been changed to use mergesort internally as opposed to the
-earlier quicksort.  For very small lists this may result in slightly
-slower sorting times, but in general the speedup should be at least
-20%.  Additional bonuses are that the worst case behaviour of sort()
-is now better (in computer science terms it now runs in time O(N log N),
-as opposed to quicksort's Theta(N**2) worst-case run time behaviour),
-and that sort() is now stable (meaning that elements with identical
-keys will stay ordered as they were before the sort).
+map() could get pathologically slow when the result list it generates
+is larger than the source list.  The performance has been improved for
+common scenarios.
+
+=item *
+
+sort() has been changed to use primarily mergesort internally as
+opposed to the earlier quicksort.  For very small lists this may
+result in slightly slower sorting times, but in general the speedup
+should be at least 20%.  Additional bonuses are that the worst case
+behaviour of sort() is now better (in computer science terms it now
+runs in time O(N log N), as opposed to quicksort's Theta(N**2)
+worst-case run time behaviour), and that sort() is now stable
+(meaning that elements with identical keys will stay ordered as they
+were before the sort).  See the C<sort> pragma for information.
+
+The story in more detail: suppose you want to serve yourself a little
+slice of Pi.
+
+    @digits = ( 3,1,4,1,5,9 );
+
+A numerical sort of the digits will yield (1,1,3,4,5,9), as expected.
+Which C<1> comes first is hard to know, since one C<1> looks pretty
+much like any other.  You can regard this as totally trivial,
+or somewhat profound.  However, if you just want to sort the even
+digits ahead of the odd ones, then what will
+
+    sort { ($a % 2) <=> ($b % 2) } @digits;
+
+yield?  The only even digit, C<4>, will come first.  But how about
+the odd numbers, which all compare equal?  With the quicksort algorithm
+used to implement Perl 5.6 and earlier, the order of ties is left up
+to the sort.  So, as you add more and more digits of Pi, the order
+in which the sorted even and odd digits appear will change.
+and, for sufficiently large slices of Pi, the quicksort algorithm
+in Perl 5.8 won't return the same results even if reinvoked with the
+same input.  The justification for this rests with quicksort's
+worst case behavior.  If you run
+
+   sort { $a <=> $b } ( 1 .. $N , 1 .. $N );
+
+(something you might approximate if you wanted to merge two sorted
+arrays using sort), doubling $N doesn't just double the quicksort time,
+it I<quadruples> it.  Quicksort has a worst case run time that can
+grow like N**2, so-called I<quadratic> behaviour, and it can happen
+on patterns that may well arise in normal use.  You won't notice this
+for small arrays, but you I<will> notice it with larger arrays,
+and you may not live long enough for the sort to complete on arrays
+of a million elements.  So the 5.8 quicksort scrambles large arrays
+before sorting them, as a statistical defence against quadratic behaviour.
+But that means if you sort the same large array twice, ties may be
+broken in different ways.
+
+Because of the unpredictability of tie-breaking order, and the quadratic
+worst-case behaviour, quicksort was I<almost> replaced completely with
+a stable mergesort.  I<Stable> means that ties are broken to preserve
+the original order of appearance in the input array.  So
+
+    sort { ($a % 2) <=> ($b % 2) } (3,1,4,1,5,9);
+
+will yield (4,3,1,1,5,9), guaranteed.  The even and odd numbers
+appear in the output in the same order they appeared in the input.
+Mergesort has worst case O(NlogN) behaviour, the best value
+attainable.  And, ironically, this mergesort does particularly
+well where quicksort goes quadratic:  mergesort sorts (1..$N, 1..$N)
+in O(N) time.  But quicksort was rescued at the last moment because
+it is faster than mergesort on certain inputs and platforms.
+For example, if you really I<don't> care about the order of even
+and odd digits, quicksort will run in O(N) time; it's very good
+at sorting many repetitions of a small number of distinct elements.
+The quicksort divide and conquer strategy works well on platforms
+with relatively small, very fast, caches.  Eventually, the problem gets
+whittled down to one that fits in the cache, from which point it
+benefits from the increased memory speed.
+
+Quicksort was rescued by implementing a sort pragma to control aspects
+of the sort.  The B<stable> subpragma forces stable behaviour,
+regardless of algorithm.  The B<_quicksort> and B<_mergesort>
+subpragmas are heavy-handed ways to select the underlying implementation.
+The leading C<_> is a reminder that these subpragmas may not survive
+beyond 5.8.  More appropriate mechanisms for selecting the implementation
+exist, but they wouldn't have arrived in time to save quicksort.
 
 =item *
 
 Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm
-(http://burtleburtle.net/bob/hash/doobs.html).  This algorithm is
+( http://burtleburtle.net/bob/hash/doobs.html ).  This algorithm is
 reasonably fast while producing a much better spread of values than
 the old hashing algorithm (originally by Chris Torek, later tweaked by
 Ilya Zakharevich).  Hash values output from the algorithm on a hash of
@@ -1191,6 +1509,11 @@ Configure C<-S> can now run non-interactively.
 
 =item *
 
+Configure support for pdp11-style memory models has been removed due
+to obsolescence.
+
+=item *
+
 configure.gnu now works with options with whitespace in them.
 
 =item *
@@ -1257,6 +1580,23 @@ site-wide changes).
 
 =item *
 
+If your file system supports symbolic links you can build Perl outside
+of the source directory by
+
+       mkdir /tmp/perl/build/directory
+       cd /tmp/perl/build/directory
+       sh /path/to/perl/source/Configure -Dmksymlinks ...
+
+This will create in /tmp/perl/build/directory a tree of symbolic links
+pointing to files in /path/to/perl/source.  The original files are left
+unaffected.  After Configure has finished you can just say
+
+       make all test
+
+and Perl will be built and tested, all in /tmp/perl/build/directory.
+
+=item *
+
 For Perl developers several new make targets for profiling
 and debugging have been added, see L<perlhack>.
 
@@ -1296,6 +1636,13 @@ Thread extension requires being Configured with C<-Duse5005threads>).
 But note that the Thread.pm interface is now shared by both
 thread models.
 
+=item *
+
+The Gconvert macro ($Config{d_Gconvert}) used by perl for stringifying
+floating-point numbers is now more picky about using sprintf %.*g
+rules for the conversion.  Some platforms that used to use gcvt may
+now resort to the slower sprintf.
+
 =back
 
 =head2 New Or Improved Platforms
@@ -1320,7 +1667,11 @@ After a long pause, AmigaOS has been verified to be happy with Perl.
 
 =item *
 
-AtheOS (http://www.atheos.cx/) is a new platform.
+AtheOS ( http://www.atheos.cx/ ) is a new platform.
+
+=item *
+
+BeOS has been reclaimed.
 
 =item *
 
@@ -1361,6 +1712,11 @@ NCR MP-RAS is now supported.
 
 =item *
 
+All the NetBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
 NetWare from Novell is now supported.  See L<perlnetware>.
 
 =item *
@@ -1369,6 +1725,22 @@ NonStop-UX is now supported.
 
 =item *
 
+NEC SUPER-UX is now supported.
+
+=item *
+
+All the OpenBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
+Perl has been tested with the GNU pth userlevel thread package
+( http://www.gnu.org/software/pth/pth.html ) . All but one thread
+test worked, and that one failure was because of test results arriving
+in unexpected order.
+
+=item *
+
 Amdahl UTS UNIX mainframe platform is now supported.
 
 =item *
@@ -1385,172 +1757,214 @@ however, you must specify -Dusedl in the arguments of Configure.
 
 =head1 Selected Bug Fixes
 
-Numerous memory leaks and uninitialized memory accesses have been hunted down.
-Most importantly anonymous subs used to leak quite a bit.
+Numerous memory leaks and uninitialized memory accesses have been
+hunted down.  Most importantly anonymous subs used to leak quite
+a bit.
 
 =over 4
 
 =item *
 
+The autouse pragma didn't work for Multi::Part::Function::Names.
+
+=item *
+
+caller() could cause core dumps in certain situations.  Carp was sometimes
+affected by this problem.
+
+=item *
+
+chop(@list) in list context returned the characters chopped in
+reverse order.  This has been reversed to be in the right order.
+
+=item *
+
+Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm)
+when building the Perl binary.  The only exception to this is SunOS 4.x,
+which needs them.
+
+=item *
+
+The behaviour of non-decimal but numeric string constants such as
+"0x23" was platform-dependent: in some platforms that was seen as 35,
+in some as 0, in some as a floating point number (don't ask).  This
+was caused by Perl using the operating system libraries in a situation
+where the result of the string to number conversion is undefined: now
+Perl consistently handles such strings as zero in numeric contexts.
+
+=item *
+
+The order of DESTROYs has been made more predictable.
+
+=item *
+
 Several debugger fixes: exit code now reflects the script exit code,
 condition C<"0"> now treated correctly, the C<d> command now checks
-line number, the C<$.> no longer gets corrupted, all debugger output now
-goes correctly to the socket if RemotePort is set.
+line number, the C<$.> no longer gets corrupted, all debugger output
+now goes correctly to the socket if RemotePort is set.
 
 =item *
 
-C<*foo{FORMAT}> now works.
+Perl 5.6.0 could emit spurious warnings about redefinition of dl_error()
+when statically building extensions into perl.  This has been corrected.
 
 =item *
 
-Lexical warnings now propagating correctly between scopes.
+L<dprofpp> -R didn't work.
 
 =item *
 
-Line renumbering with eval and C<#line> now works.
-
+C<*foo{FORMAT}> now works.
 =item *
 
-Fixed numerous memory leaks, especially in eval "".
+Infinity is now recognized as a number.
 
 =item *
 
-Modulus of unsigned numbers now works (4063328477 % 65535 used to
-return 27406, instead of 27047).
+UNIVERSAL::isa no longer caches methods incorrectly.  (This broke
+the Tk extension with 5.6.0.)
 
 =item *
 
-Some "not a number" warnings introduced in 5.6.0 eliminated to be
-more compatible with 5.005.  Infinity is now recognised as a number.
+Lexicals I: lexicals outside an eval "" weren't resolved
+correctly inside a subroutine definition inside the eval "" if they
+were not already referenced in the top level of the eval""ed code.
 
 =item *
 
-our() variables will not cause "will not stay shared" warnings.
+Lexicals II: lexicals leaked at file scope into subroutines that
+were declared before the lexicals.
 
 =item *
 
-pack "Z" now correctly terminates the string with "\0".
+Lexical warnings now propagating correctly between scopes
+and into C<eval "...">.
 
 =item *
 
-Fix password routines which in some shadow password platforms
-(e.g. HP-UX) caused getpwent() to return every other entry.
+C<use warnings qw(FATAL all)> did not work as intended.  This has been
+corrected.
 
 =item *
 
-printf() no longer resets the numeric locale to "C".
+warnings::enabled() now reports the state of $^W correctly if the caller
+isn't using lexical warnings.
 
 =item *
 
-C<q(a\\b)> now parses correctly as C<'a\\b'>.
+Line renumbering with eval and C<#line> now works.
 
 =item *
 
-Printing quads (64-bit integers) with printf/sprintf now works
-without the q L ll prefixes (assuming you are on a quad-capable platform).
+Fixed numerous memory leaks, especially in eval "".
 
 =item *
 
-Regular expressions on references and overloaded scalars now work.
+mkdir() now ignores trailing slashes in the directory name,
+as mandated by POSIX.
 
 =item *
 
-scalar() now forces scalar context even when used in void context.
+Some versions of glibc have a broken modfl().  This affects builds
+with C<-Duselongdouble>.  This version of Perl detects this brokenness
+and has a workaround for it.  The glibc release 2.2.2 is known to have
+fixed the modfl() bug.
 
 =item *
 
-sort() arguments are now compiled in the right wantarray context
-(they were accidentally using the context of the sort() itself).
+Modulus of unsigned numbers now works (4063328477 % 65535 used to
+return 27406, instead of 27047).
 
 =item *
 
-Changed the POSIX character class C<[[:space:]]> to include the (very
-rare) vertical tab character.  Added a new POSIX-ish character class
-C<[[:blank:]]> which stands for horizontal whitespace (currently,
-the space and the tab).
+Some "not a number" warnings introduced in 5.6.0 eliminated to be
+more compatible with 5.005.  Infinity is now recognised as a number.
 
 =item *
 
-$AUTOLOAD, sort(), lock(), and spawning subprocesses
-in multiple threads simultaneously are now thread-safe.
+Numeric conversions did not recognize changes in the string value
+properly in certain circumstances.
 
 =item *
 
-Allow read-only string on left hand side of non-modifying tr///.
+Attributes (like :shared) didn't work with our().
 
 =item *
 
-Several Unicode fixes (but still not perfect).
+our() variables will not cause "will not stay shared" warnings.
+
+=item *
 
-=over 8
+"our" variables of the same name declared in two sibling blocks
+resulted in bogus warnings about "redeclaration" of the variables.
+The problem has been corrected.
 
 =item *
 
-BOMs (byte order marks) in the beginning of Perl files
-(scripts, modules) should now be transparently skipped.
-UTF-16 (UCS-2) encoded Perl files should now be read correctly.
+pack "Z" now correctly terminates the string with "\0".
 
 =item *
 
-The character tables have been updated to Unicode 3.0.1.
+Fix password routines which in some shadow password platforms
+(e.g. HP-UX) caused getpwent() to return every other entry.
 
 =item *
 
-chr() for values greater than 127 now create utf8 when under use
-utf8.
+The PERL5OPT environment variable (for passing command line arguments
+to Perl) didn't work for more than a single group of options.
 
 =item *
 
-Comparing with utf8 data does not magically upgrade non-utf8 data into
-utf8.
+PERL5OPT with embedded spaces didn't work.
 
 =item *
 
-C<IsAlnum>, C<IsAlpha>, and C<IsWord> now match titlecase.
+printf() no longer resets the numeric locale to "C".
 
 =item *
 
-Concatenation with the C<.> operator or via variable interpolation,
-C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator,
-substitution with C<s///>, single-quoted UTF8, should now work--in
-theory.
+C<qw(a\\b)> now parses correctly as C<'a\\b'>.
 
 =item *
 
-The C<tr///> operator now works I<slightly> better but is still rather
-broken.  Note that the C<tr///CU> functionality has been removed (but
-see pack('U0', ...)).
+pos() did not return the correct value within s///ge in earlier
+versions.  This is now handled correctly.
 
 =item *
 
-vec() now refuses to deal with characters >255.
+Printing quads (64-bit integers) with printf/sprintf now works
+without the q L ll prefixes (assuming you are on a quad-capable platform).
 
 =item *
 
-Zero entries were missing from the Unicode classes like C<IsDigit>.
+Regular expressions on references and overloaded scalars now work.
 
 =item *
 
-chop(@list) in list context returned the characters chopped in
-reverse order.  This has been reversed to be in the right order.
+Right-hand side magic (GMAGIC) could in many cases such as string
+concatenation be invoked too many times.
 
 =item *
 
-The order of DESTROYs has been made more predictable.
+scalar() now forces scalar context even when used in void context.
 
 =item *
 
-mkdir() now ignores trailing slashes in the directory name,
-as mandated by POSIX.
+SOCKS support is now much more robust.
 
 =item *
 
-Attributes (like :shared) didn't work with our().
+sort() arguments are now compiled in the right wantarray context
+(they were accidentally using the context of the sort() itself).
+The comparison block is now run in scalar context, and the arguments
+to be sorted are always provided list context.
 
 =item *
 
-The PERL5OPT environment variable (for passing command line arguments
-to Perl) didn't work for more than a single group of options.
+Changed the POSIX character class C<[[:space:]]> to include the (very
+rarely used) vertical tab character.  Added a new POSIX-ish character
+class C<[[:blank:]]> which stands for horizontal whitespace
+(currently, the space and the tab).
 
 =item *
 
@@ -1560,124 +1974,134 @@ behaviour consistent with that of string interpolation.
 
 =item *
 
-All but the first argument of the IO syswrite() method are now optional.
+Some cases of inconsistent taint propagation (such as within hash
+values) have been fixed.
 
 =item *
 
-Tie::ARRAY SPLICE method was broken.
+The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds
+of simple pattern matches.  These are now handled better.
 
 =item *
 
-vec() now tries to work with characters <= 255 when possible, but it leaves
-higher character values in place.  In that case, if vec() was used to modify
-the string, it is no longer considered to be utf8-encoded.
+Regular expression debug output (whether through C<use re 'debug'>
+or via C<-Dr>) now looks better.
 
 =item *
 
-The autouse pragma didn't work for Multi::Part::Function::Names.
+Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed.  The
+bug has been fixed.
 
 =item *
 
-The behaviour of non-decimal but numeric string constants such as
-"0x23" was platform-dependent: in some platforms that was seen as 35,
-in some as 0, in some as a floating point number (don't ask).  This
-was caused by Perl using the operating system libraries in a situation
-where the result of the string to number conversion is undefined: now
-Perl consistently handles such strings as zero in numeric contexts.
+Use of $& could trigger a core dump under some situations.  This
+is now avoided.
 
 =item *
 
-L<dprofpp> -R didn't work.
+The regular expression captured submatches ($1, $2, ...) are now
+more consistently unset if the match fails, instead of leaving false
+data lying around in them.
 
 =item *
 
-PERL5OPT with embedded spaces didn't work.
+readline() on files opened in "slurp" mode could return an extra "" at
+the end in certain situations.  This has been corrected.
 
 =item *
 
-L<Sys::Syslog> ignored the C<LOG_AUTH> constant.
+Autovivification of symbolic references of special variables described
+in L<perlvar> (as in C<${$num}>) was accidentally disabled.  This works
+again now.
 
 =item *
 
-Some versions of glibc have a broken modfl().  This affects builds
-with C<-Duselongdouble>.  This version of Perl detects this brokenness
-and has a workaround for it.  The glibc release 2.2.2 is known to have
-fixed the modfl() bug.
+Sys::Syslog ignored the C<LOG_AUTH> constant.
 
 =item *
 
-Linux previously had problems related to sockaddrlen when using
-accept(), revcfrom() (in Perl: recv()), getpeername(), and getsockname().
+All but the first argument of the IO syswrite() method are now optional.
 
 =item *
 
-Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.
+$AUTOLOAD, sort(), lock(), and spawning subprocesses
+in multiple threads simultaneously are now thread-safe.
 
 =item *
 
-Windows
+Tie::ARRAY SPLICE method was broken.
 
-=over 8
+=item *
+
+Allow read-only string on left hand side of non-modifying tr///.
 
 =item *
 
-Borland C++ v5.5 is now a supported compiler that can build Perl.
-However, the generated binaries continue to be incompatible with those
-generated by the other supported compilers (GCC and Visual C++).
+If C<STDERR> is tied, warnings caused by C<warn> and C<die> now
+correctly pass to it.
 
 =item *
 
-Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
-Other bugs in chdir() and Cwd::cwd() have also been fixed.
+Several Unicode fixes.
+
+=over 8
 
 =item *
 
-Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
+BOMs (byte order marks) in the beginning of Perl files
+(scripts, modules) should now be transparently skipped.
+UTF-16 (UCS-2) encoded Perl files should now be read correctly.
 
 =item *
 
-HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html
+The character tables have been updated to Unicode 3.1.1.
 
 =item *
 
-The makefiles now provide a single switch to bulk-enable all the features
-enabled in ActiveState ActivePerl (a popular Win32 binary distribution).
+Comparing with utf8 data does not magically upgrade non-utf8 data
+into utf8.  (This was a problem for example if you were mixing data
+from I/O and Unicode data: your output might have got magically encoded
+as UTF-8.)
 
-=back
+=item *
 
-=back
+Generating illegal Unicode code points like U+FFFE, or the UTF-16
+surrogates, now also generates an optional warning.
 
 =item *
 
-UNIVERSAL::isa no longer caches methods incorrectly.  (This broke
-the Tk extension with 5.6.0.)
+C<IsAlnum>, C<IsAlpha>, and C<IsWord> now match titlecase.
 
 =item *
 
-Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm)
-when building the Perl binary.  The only exception to this is SunOS 4.x,
-which needs them.
+Concatenation with the C<.> operator or via variable interpolation,
+C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator,
+substitution with C<s///>, single-quoted UTF8, should now work.
 
 =item *
 
-SOCKS support is now much more robust.
+The C<tr///> operator now works.  Note that the C<tr///CU>
+functionality has been removed (but see pack('U0', ...)).
 
 =item *
 
-If your file system supports symbolic links you can build Perl outside
-of the source directory by
+C<eval "v200"> now works.
 
-       mkdir /tmp/perl/build/directory
-       cd /tmp/perl/build/directory
-       sh /path/to/perl/source/Configure -Dmksymlinks ...
+=item *
 
-This will create in /tmp/perl/build/directory a tree of symbolic links
-pointing to files in /path/to/perl/source.  The original files are left
-unaffected.  After Configure has finished you can just say
+Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings.
+This has been corrected.
 
-       make all test
+=item *
 
-and Perl will be built and tested, all in /tmp/perl/build/directory.
+Zero entries were missing from the Unicode classes like C<IsDigit>.
+
+=back
+
+=item *
+
+Large unsigned numbers (those above 2**31) could sometimes lose their
+unsignedness, causing bogus results in arithmetic operations.
 
 =back
 
@@ -1695,13 +2119,17 @@ Perl now works on post-4.0 BSD/OSes.
 
 All BSDs
 
-Setting C<$0> now works (as much as possible; see perlvar for details).
+Setting C<$0> now works (as much as possible; see L<perlvar> for details).
 
 =item *
 
 Cygwin
 
-Numerous updates; currently synchronised with Cygwin 1.1.4.
+Numerous updates; currently synchronised with Cygwin 1.3.10.
+
+=item *
+
+Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.
 
 =item *
 
@@ -1719,7 +2147,7 @@ Perl now works on post-3.0 FreeBSDs.
 
 HP-UX
 
-README.hpux updated; C<Configure -Duse64bitall> now almost works.
+README.hpux updated; C<Configure -Duse64bitall> now works.
 
 =item *
 
@@ -1732,10 +2160,21 @@ of 32-bit and 64-bit libraries (a doomed attempt) made much harder.
 
 Linux
 
+=over 8
+
+=item *
+
 Long doubles should now work (see INSTALL).
 
 =item *
 
+Linux previously had problems related to sockaddrlen when using
+accept(), revcfrom() (in Perl: recv()), getpeername(), and getsockname().
+
+=back
+
+=item *
+
 MacOS Classic
 
 Compilation of the standard Perl distribution in MacOS Classic should
@@ -1792,6 +2231,24 @@ VMS
 chdir() now works better despite a CRT bug; now works with MULTIPLICITY
 (see INSTALL); now works with Perl's malloc.
 
+The tainting of C<%ENV> elements via C<keys> or C<values> was previously
+unimplemented.  It now works as documented.
+
+The C<waitpid> emulation has been improved.  The worst bug (now fixed)
+was that a pid of -1 would cause a wildcard search of all processes on
+the system.  The most significant enhancement is that we can now
+usually get the completion status of a terminated process.
+
+POSIX-style signals are now emulated much better on VMS versions prior
+to 7.0.
+
+The C<system> function and backticks operator have improved
+functionality and better error handling.
+
+File access tests now use current process privileges rather than the
+user's default privileges, which could sometimes result in a mismatch
+between reported access and actual access.
+
 =item *
 
 Windows
@@ -1804,22 +2261,56 @@ accept() no longer leaks memory.
 
 =item *
 
+Borland C++ v5.5 is now a supported compiler that can build Perl.
+However, the generated binaries continue to be incompatible with those
+generated by the other supported compilers (GCC and Visual C++).
+
+=item *
+
 Better chdir() return value for a non-existent directory.
 
 =item *
 
+Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
+
+=item *
+
 New %ENV entries now propagate to subprocesses.
 
 =item *
 
+Current directory entries in %ENV are now correctly propagated to child
+processes.
+
+=item *
+
 $ENV{LIB} now used to search for libs under Visual C.
 
 =item *
 
+fork() emulation has been improved in various ways, but still continues
+to be experimental.  See L<perlfork> for known bugs and caveats.
+
+=item *
+
 A failed (pseudo)fork now returns undef and sets errno to EAGAIN.
 
 =item *
 
+Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
+Other bugs in chdir() and Cwd::cwd() have also been fixed.
+
+=item *
+
+HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html
+
+=item *
+
+The makefiles now provide a single switch to bulk-enable all the features
+enabled in ActiveState ActivePerl (a popular Win32 binary distribution).
+
+=item *
+
 Allow REG_EXPAND_SZ keys in the registry.
 
 =item *
@@ -1832,12 +2323,17 @@ Fake signal handling reenabled, bugs and all.
 
 =item *
 
+%SIG has been enabled under USE_ITHREADS, but its use is completely
+unsupported under all configurations.
+
+=item *
+
 Less stack reserved per thread so that more threads can run
 concurrently. (Still 16M per thread.)
 
 =item *
 
-C<File::Spec->tmpdir()> now prefers C:/temp over /tmp
+C<File::Spec-&gt;tmpdir()> now prefers C:/temp over /tmp
 (works better when perl is running as service).
 
 =item *
@@ -1846,12 +2342,19 @@ Better UNC path handling under ithreads.
 
 =item *
 
-wait() and waitpid() now work much better.
+wait(), waitpid() and backticks now return the correct exit status under
+Windows 9x.
 
 =item *
 
 winsock handle leak fixed.
 
+=item *
+
+The Perl parser has been stress tested using both random input and
+Markov chain input and the few found crashes and lockups have been
+fixed.
+
 =back
 
 =back
@@ -1862,6 +2365,12 @@ winsock handle leak fixed.
 
 =item *
 
+The lexical warnings category "deprecated" is no longer a sub-category
+of the "syntax" category. It is now a top-level category in its own
+right.
+
+=item *
+
 All regular expression compilation error messages are now hopefully
 easier to understand both because the error message now comes before
 the failed regex and because the point of failure is now clearly
@@ -1871,7 +2380,7 @@ marked by a C<E<lt>-- HERE> marker.
 
 The various "opened only for", "on closed", "never opened" warnings
 drop the C<main::> prefix for filehandles in the C<main> package,
-for example C<STDIN> instead of <main::STDIN>. 
+for example C<STDIN> instead of C<main::STDIN>. 
 
 =item *
 
@@ -1887,6 +2396,26 @@ respectively.
 
 =item *
 
+The debugger (perl5db.pl) has been modified to present a more
+consistent commands interface, via (CommandSet=580).  perl5db.t was
+also added to test the changes, and as a placeholder for further tests.
+
+See L<perldebug>.
+
+=item *
+
+The debugger has a new C<dumpDepth> option to control the maximum
+depth to which nested structures are dumped.  The C<x> command has
+been extended so that C<x N EXPR> dumps out the value of I<EXPR> to a
+depth of at most I<N> levels.
+
+=item *
+
+The debugger can now show lexical variables if you have the CPAN
+module PadWalker installed.
+
+=item *
+
 If an attempt to use a (non-blessed) reference as an array index
 is made, a warning is given.
 
@@ -1905,12 +2434,18 @@ for the C<"c"> format and a number less than -128 or more than 127.
 =item *
 
 Certain regex modifiers such as C<(?o)> make sense only if applied to
-the entire regex.  You will an optional warning if you try to do otherwise.
+the entire regex.  You will get an optional warning if you try to do
+otherwise. 
 
 =item *
 
-Using arrays or hashes as references (e.g. C<%foo->{bar}> has been
-deprecated for a while.  Now you will get an optional warning.
+Using arrays or hashes as references (e.g. C<< %foo->{bar} >>
+has been deprecated for a while.  Now you will get an optional warning.
+
+=item *
+
+Using C<sort> in scalar context now issues an optional warning.
+This didn't do anything useful, as the sort was not performed.
 
 =back
 
@@ -1934,7 +2469,10 @@ For careful hackers only.
 
 =item *
 
-Added rsignal(), whichsig(), do_join() to the publicised API.
+Added rsignal(), whichsig(), do_join(), op_clear, op_null,
+ptr_table_clear(), ptr_table_free(), sv_setref_uv(), and several UTF-8
+interfaces to the publicised API.  For the full list of the available
+APIs see L<perlapi>.
 
 =item *
 
@@ -1942,16 +2480,8 @@ Made possible to propagate customised exceptions via croak()ing.
 
 =item *
 
-Added is_utf8_char(), is_utf8_string(), bytes_to_utf8(), and utf8_to_bytes().
-
-=item *
-
-Now xsubs can have attributes just like subs.
-
-=item *
-
-Some new APIs: ptr_table_clear(), ptr_table_free(), sv_setref_uv().
-For the full list of the available APIs see L<perlapi>.
+Now xsubs can have attributes just like subs.  (Well, at least the
+built-in attributes.)
 
 =item *
 
@@ -1994,11 +2524,7 @@ to F<Porting/repository.pod>.
 
 =item *
 
-There are now several profiling make targets 
-
-=item *
-
-The C<op_clear> and C<op_null> are now exported.
+There are now several profiling make targets.
 
 =back
 
@@ -2030,11 +2556,22 @@ unfortunately, always possible.  The suidperl functionality is most
 probably going to be removed in Perl 5.10.  In any case, suidperl
 should only be used by security experts who know exactly what they are
 doing and why they are using suidperl instead of some other solution
-such as sudo (see http://www.courtesan.com/sudo/).
+such as sudo ( see http://www.courtesan.com/sudo/ ).
 
 =head1 New Tests
 
-Several new tests have been added, especially for the F<lib> subsection.
+Several new tests have been added, especially for the F<lib>
+subsection.  There are now about 56 000 individual tests (spread over
+about 620 test scripts), in the regression suite (5.6.1 has about
+11700 tests, in 258 test scripts) Many of the new tests are introduced
+by the new modules, but still in general Perl is now more thoroughly
+tested.
+
+Because of the large number of tests, running the regression suite
+will take considerably longer time than it used to: expect the suite
+to take up to 4-5 times longer to run than in perl 5.6.  In a really
+fast machine you can hope to finish the suite in about 6-8 minutes
+(wallclock time).
 
 The tests are now reported in a different order than in earlier Perls.
 (This happens because the test scripts from under t/lib have been moved
@@ -2042,10 +2579,6 @@ to be closer to the library/extension they are testing.)
 
 =head1 Known Problems
 
-Note that unlike other sections in this document (which describe
-changes since 5.7.0) this section is cumulative containing known
-problems for all the 5.7 releases.
-
 =head2 AIX
 
 =over 4
@@ -2068,31 +2601,32 @@ The AIX C compiler vac version 5.0.0.0 may produce buggy code,
 resulting in few random tests failing, but when the failing tests
 are run by hand, they succeed.  We suggest upgrading to at least
 vac version 5.0.1.0, that has been known to compile Perl correctly.
-"lslpp -L|grep vac.C" will tell you the vac version.
+"lslpp -L|grep vac.C" will tell you the vac version. See README.aix.
+
+=item *
+
+If building threaded Perl, you may get compilation warning from pp_sys.c:
+
+  "pp_sys.c", line 4651.39: 1506-280 (W) Function argument assignment between types "unsigned char*" and "const void*" is not allowed.
+
+This is harmless; it is caused by the getnetbyaddr() and getnetbyaddr_r()
+having slightly different types for their first argument.
 
 =back
 
 =head2 Amiga Perl Invoking Mystery
 
 One cannot call Perl using the C<volume:> syntax, that is, C<perl -v>
-works, but for example C<bin:perl -v> doesn't.  The exact reason is
+works, but for example C<bin:perl -v> doesn't.  The exact reason isn't
 known but the current suspect is the F<ixemul> library.
 
-=head2 lib/ftmp-security tests warn 'system possibly insecure'
-
-Don't panic.  Read INSTALL 'make test' section instead.
-
-=head2 Cygwin intermittent failures of lib/Memoize/t/expire_file 11 and 12
+=head2 mod_perl 1.26 Doesn't Build With Threaded Perl
 
-The subtests 11 and 12 sometimes fail and sometimes work.
+Use mod_perl 1.27 or higher.
 
-=head2 HP-UX lib/io_multihomed Fails When LP64-Configured
+=head2 lib/ftmp-security tests warn 'system possibly insecure'
 
-The lib/io_multihomed test may hang in HP-UX if Perl has been
-configured to be 64-bit. Because other 64-bit platforms do not hang in
-this test, HP-UX is suspect. All other tests pass in 64-bit HP-UX. The
-test attempts to create and connect to "multihomed" sockets (sockets
-which have multiple IP addresses).
+Don't panic.  Read INSTALL 'make test' section instead.
 
 =head2  HP-UX lib/posix Subtest 9 Fails When LP64-Configured
 
@@ -2105,128 +2639,129 @@ subtest 9 failed.
 
 No known fix.
 
-=head2 OS/390
+=head2 Mac OS X
 
-OS/390 has rather many test failures but the situation is actually
-better than it was in 5.6.0, it's just that so many new modules and
-tests have been added.
+The following tests are known to fail:
+
+ Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
+ -------------------------------------------------------------------------
+ ../ext/DB_File/t/db-btree.t    0    11    ??   ??       %  ??
+ ../ext/DB_File/t/db-recno.t              149    3   2.01%  61 63 65
+ ../ext/POSIX/t/posix.t                    31    1   3.23%  10
+
+If you are building on a UFS partition, you will also probably see
+t/op/stat.t subtest #9 fail.  This is caused by Darwin's UFS not
+supporting inode change time.
+
+=head2 op/sprintf tests 91, 129, and 130
 
- Failed Test                     Stat Wstat Total Fail  Failed  List of Failed
- -----------------------------------------------------------------------------
- ../ext/B/Deparse.t                            14    1   7.14%  14
- ../ext/B/Showlex.t                             1    1 100.00%  1
- ../ext/Encode/Encode/Tcl.t                   610   13   2.13%  592 594 596 598
-                                                                600 602 604-610
- ../ext/IO/lib/IO/t/io_unix.t     113 28928     5    3  60.00%  3-5
- ../ext/POSIX/POSIX.t                          29    1   3.45%  14
- ../ext/Storable/t/lock.t         255 65280     5    3  60.00%  3-5
- ../lib/locale.t                  129 33024   117   19  16.24%  99-117
- ../lib/warnings.t                            434    1   0.23%  75
- ../lib/ExtUtils.t                             27    1   3.70%  25
- ../lib/Math/BigInt/t/bigintpm.t             1190    1   0.08%  1145
- ../lib/Unicode/UCD.t                          81   48  59.26%  1-16 49-64 66-81
- ../lib/User/pwent.t                            9    1  11.11%  4
- op/pat.t                                     660    6   0.91%  242-243 424-425
-                                                                626-627
- op/split.t                         0     9    ??   ??       %  ??
- op/taint.t                                   174    3   1.72%  156 162 168
- op/tr.t                                       70    3   4.29%  50 58-59
- Failed 16/422 test scripts, 96.21% okay. 105/23251 subtests failed, 99.55% okay.
-
-=head2 op/sprintf tests 129 and 130
-
-The op/sprintf tests 129 and 130 are known to fail on some platforms.
+The op/sprintf tests 91, 129, and 130 are known to fail on some platforms.
 Examples include any platform using sfio, and Compaq/Tandem's NonStop-UX.
-The failing platforms do not comply with the ANSI C Standard, line
-19ff on page 134 of ANSI X3.159 1989 to be exact.  (They produce
-something other than "1" and "-1" when formatting 0.6 and -0.6 using
-the printf format "%.0f", most often they produce "0" and "-0".)
 
-=head2  Failure of Thread tests
+The test 91 is known to fail at QNX6 (nto), because C<sprintf '%e',0>
+incorrectly produces C<0.000000e+0> instead of C<0.000000e+00>.
 
-B<Note that support for 5.005-style threading remains experimental.>
+For the tests 129 and 130 the failing platforms do not comply with
+the ANSI C Standard, line 19ff on page 134 of ANSI X3.159 1989 to
+be exact.  (They produce something other than "1" and "-1" when
+formatting 0.6 and -0.6 using the printf format "%.0f", most often
+they produce "0" and "-0".)
+
+=head2 Failure of Thread (5.005-style) tests
+
+B<Note that support for 5.005-style threading remains experimental
+and practically unsupported.>
 
 The following tests are known to fail due to fundamental problems in
 the 5.005 threading implementation. These are not new failures--Perl
 5.005_0x has the same bugs, but didn't have these tests.
 
-  lib/autouse.t                 4
-  t/lib/thr5005.t               19-20
+ ../ext/List/Util/t/first.t         255 65280     7    4  57.14%  2 5-7
+ ../lib/English.t                     2   512    54    2   3.70%  2-3
+ ../lib/Filter/Simple/t/data.t                    6    3  50.00%  1-3
+ ../lib/Filter/Simple/t/filter_onl                9    3  33.33%  1-2 5
+ ../lib/autouse.t                                10    1  10.00%  4
+ op/flip.t                                       15    1   6.67%  15
+
+These failures are unlikely to get fixed as the 5.005-style
+threads are considered fundamentally broken.
 
 =head2 UNICOS
 
-=over 4
+ Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Socket/socketpair.t    1   256    45    1   2.22%  12
+ ../lib/Math/Trig.t                       26    1   3.85%  25
+ ../lib/warnings.t                       460    1   0.22%  425
+ io/fs.t                                  36    1   2.78%  31
+ op/numconvert.t                        1440   13   0.90%  208 509-510
+ 657-658 665-666 829-830 989-990 1149-1150
 
-=item *
+=head2 UNICOS and UNICOS/mk
 
-ext/POSIX/sigaction subtests 6 and 13 may fail.
+The io/fs test #31 is failing because in UNICOS and UNICOS/mk the Perl
+truncate() cannot be used to grow the size of filehandles, only to
+reduce the size.  The workaround is to truncate files instead of
+filehandles.
 
-=item *
+=head2 UNICOS/mk
 
-lib/ExtUtils may spuriously claim that subtest 28 failed,
-which is interesting since the test only has 27 tests.
+=over 4
 
 =item *
 
-Numerous numerical test failures
-
-  op/numconvert                 209,210,217,218
-  op/override                   7
-  ext/Time/HiRes/HiRes          9
-  lib/Math/BigInt/t/bigintpm    1145
-  lib/Math/Trig                 25
+During Configure the test
 
-These tests fail because of yet unresolved floating point inaccuracies.
+    Guessing which symbols your C compiler and preprocessor define...
 
-=back
+will probably fail with error messages like
 
-=head2 UTS
+    CC-20 cc: ERROR File = try.c, Line = 3
+      The identifier "bad" is undefined.
 
-There are a few known test failures, see L<perluts>.
+      bad switch yylook 79bad switch yylook 79bad switch yylook 79bad switch yylook 79#ifdef A29K
+      ^
 
-=head2 VMS
+    CC-65 cc: ERROR File = try.c, Line = 3
+      A semicolon is expected at this point.
 
-Rather many tests are failing in VMS but that actually more tests
-succeed in VMS than they used to, it's just that there are many,
-many more tests than there used to be.
+This is caused by a bug in awk utility of UNICOS/mk.  You can ignore
+the error, but it does cause a slight problem: you cannot fully
+benefit from the h2ph utility (see L<h2ph>) that can be used to
+convert C headers to Perl libraries, mainly used to be able to access
+from Perl the constants defined using C preprocessor, cpp.  Because of
+the above error parts of the converted headers will be invisible.
+Luckily, these days the need for h2ph is rare.
 
-Here are the known failures from some compiler/platform combinations.
+=item *
 
-DEC C V5.3-006 on OpenVMS VAX V6.2
+If building Perl with the interpreter threads (ithreads), the
+getgrent(), getgrnam(), and getgrgid() functions cannot return the
+list of the group members due to a bug in the multithreaded support of
+UNICOS/mk.  What this means that in list context the functions will
+return only three values, not four.
 
-  [-.ext.list.util.t]tainted..............FAILED on test 3
-  [-.ext.posix]sigaction..................FAILED on test 7
-  [-.ext.time.hires]hires.................FAILED on test 14
-  [-.lib.file.find]taint..................FAILED on test 17
-  [-.lib.math.bigint.t]bigintpm...........FAILED on test 1183
-  [-.lib.test.simple.t]exit...............FAILED on test 1
-  [.lib]vmsish............................FAILED on test 13
-  [.op]sprintf............................FAILED on test 12
-  Failed 8/399 tests, 91.23% okay.
+=back
 
-DEC C V6.0-001 on OpenVMS Alpha V7.2-1 and
-Compaq C V6.2-008 on OpenVMS Alpha V7.1
+=head2 UTS
 
-  [-.ext.list.util.t]tainted..............FAILED on test 3 
-  [-.lib.file.find]taint..................FAILED on test 17
-  [-.lib.test.simple.t]exit...............FAILED on test 1
-  [.lib]vmsish............................FAILED on test 13
-  Failed 4/399 tests, 92.48% okay.
+There are a few known test failures, see L<perluts>.
 
-Compaq C V6.4-005 on OpenVMS Alpha 7.2.1
+=head2 VMS
 
-  [-.ext.b]showlex........................FAILED on test 1
-  [-.ext.list.util.t]tainted..............FAILED on test 3
-  [-.lib.file.find]taint..................FAILED on test 17 
-  [-.lib.test.simple.t]exit...............FAILED on test 1
-  [.lib]vmsish............................FAILED on test 13
-  [.op]misc...............................FAILED on test 49
-  Failed 6/401 tests, 92.77% okay.
+There should be no reported test failures with a default configuration,
+though there are a number of tests marked TODO that point to areas
+needing further debugging and/or porting work.
 
 =head2 Win32
 
 In multi-CPU boxes there are some problems with the I/O buffering:
-some output may appear twice.
+some output may appear twice.  The following Win32 failures are known
+as of 5.7.3:
+
+ Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
+ -------------------------------------------------------------------------
+  ..\ext/threads/t/end.t                6    4  66.67%  3-6
 
 =head2 Localising a Tied Variable Leaks Memory
 
@@ -2240,6 +2775,37 @@ some output may appear twice.
 Code like the above is known to leak memory every time the local()
 is executed.
 
+=head2 z/OS (OS/390)
+
+z/OS has rather many test failures but the situation is actually
+better than it was in 5.6.0, it's just that so many new modules and
+tests have been added.
+
+ Failed Test                 Stat Wstat Total Fail  Failed  List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Data/Dumper/t/dumper.t              321    2   0.62%  311 314
+ ../ext/IO/lib/IO/t/io_unix.t                 5    4  80.00%  2-5
+ ../lib/utf8.t                               94   13  13.83%  27 30-31 43 46 73
+                                                              76 79 82 85 88 91
+                                                              94
+ ../lib/Benchmark.t               1   256   159    1   0.63%  75
+ ../lib/ExtUtils/t/Constant.t                27   19  70.37%  5-23
+ ../lib/ExtUtils/t/Embed.t                    9    9 100.00%  1-9
+ op/pat.t                                   864    9   1.04%  242-243 665 776
+                                                              785 832-834 845
+ op/sprintf.t                               224    3   1.34%  98 100 136
+ op/tr.t                                     97    5   5.15%  63 71-74
+ uni/fold.t                                 767    8   1.04%  25-26 62 169 196
+                                                              648 697-698
+ 60 tests and 384 subtests skipped.
+
+=head2 Localising Tied Arrays and Hashes Is Broken
+
+    local %tied_array;
+
+doesn't work as one would expect: the old value is restored
+incorrectly.
+
 =head2 Self-tying of Arrays and Hashes Is Forbidden
 
 Self-tying of arrays and hashes is broken in rather deep and
@@ -2247,11 +2813,6 @@ hard-to-fix ways.  As a stop-gap measure to avoid people from getting
 frustrated at the mysterious results (core dumps, most often) it is
 for now forbidden (you will get a fatal error even from an attempt).
 
-=head2 Variable Attributes are not Currently Usable for Tieing
-
-This limitation will hopefully be fixed in future.  (Subroutine
-attributes work fine for tieing, see L<Attribute::Handlers>).
-
 =head2 Building Extensions Can Fail Because Of Largefiles
 
 Some extensions like mod_perl are known to have issues with
@@ -2268,12 +2829,19 @@ one can (or, if one can, whether it's a good idea) link together at
 all binaries with different ideas about file offsets, all this is
 platform-dependent.
 
+=head2 Unicode Support on EBCDIC Still Spotty
+
+Though mostly working, Unicode support still has problem spots on
+EBCDIC platforms.  One such known spot are the C<\p{}> and C<\P{}>
+regular expression constructs for code points less than 256: the
+pP are testing for Unicode code points, not knowing about EBCDIC.
+
 =head2 The Compiler Suite Is Still Experimental
 
-The compiler suite is slowly getting better but is nowhere near
-working order yet.
+The compiler suite is slowly getting better but it continues to be
+highly experimental.  Use in production environments is discouraged.
 
-=head2 The Long Double Support is Still Experimental
+=head2 The Long Double Support Is Still Experimental
 
 The ability to configure Perl's numbers to use "long doubles",
 floating point numbers of hopefully better accuracy, is still
@@ -2285,12 +2853,19 @@ by slowdown in computations (more bits to move around, and the
 operations are more likely to be executed by less optimised
 libraries).
 
+=head2 Seen In Perl 5.7 But Gone Now
+
+C<Time::Piece> (previously known as C<Time::Object>) was removed
+because it was felt that it didn't have enough value in it to be a
+core module.  It is still a useful module, though, and is available
+from the CPAN.
+
 =head1 Reporting Bugs
 
 If you find what you think is a bug, you might check the articles
 recently posted to the comp.lang.perl.misc newsgroup and the perl
-bug database at http://bugs.perl.org.  There may also be
-information at http://www.perl.com/perl/, the Perl Home Page.
+bug database at http://bugs.perl.org/  There may also be
+information at http://www.perl.com/ , the Perl Home Page.
 
 If you believe you have an unreported bug, please run the B<perlbug>
 program included with your release.  Be sure to trim your bug down