=head1 NAME
-perlwin32 - Perl under Win32
+perlwin32 - Perl under Windows
=head1 SYNOPSIS
-These are instructions for building Perl under Windows NT (versions
-3.51 or 4.0). Currently, this port is reported to build under
-Windows95 using the 4DOS shell--the default shell that infests
-Windows95 may not work fully (but see below). Note that this caveat
-is only about B<building> perl. Once built, you should be able to
-B<use> it on either Win32 platform (modulo the problems arising from
-the inferior command shell).
+These are instructions for building Perl under Windows 2000 and later.
=head1 DESCRIPTION
Before you start, you should glance through the README file
-found in the top-level directory where the Perl distribution
+found in the top-level directory to which the Perl distribution
was extracted. Make sure you read and understand the terms under
which this software is being distributed.
particular, you can safely ignore any information that talks about
"Configure".
-You may also want to look at two other options for building
-a perl that will work on Windows NT: the README.cygwin and
-README.os2 files, which each give a different set of rules to build
-a Perl that will work on Win32 platforms. Those two methods will
-probably enable you to build a more Unix-compatible perl, but you
-will also need to download and use various other build-time and
-run-time support software described in those files.
+You may also want to look at one other option for building a perl that
+will work on Windows: the README.cygwin file, which give a different
+set of rules to build a perl for Windows. This method will probably
+enable you to build a more Unix-compatible perl, but you will also
+need to download and use various other build-time and run-time support
+software described in that file.
This set of instructions is meant to describe a so-called "native"
-port of Perl to Win32 platforms. The resulting Perl requires no
+port of Perl to the Windows platform. This includes both 32-bit and
+64-bit Windows operating systems. The resulting Perl requires no
additional software to run (other than what came with your operating
system). Currently, this port is capable of using one of the
-following compilers:
+following compilers on the Intel x86 architecture:
- Borland C++ version 5.02 or later
- Microsoft Visual C++ version 4.2 or later
- Mingw32 with EGCS versions 1.0.2, 1.1
- Mingw32 with GCC version 2.8.1
+ Microsoft Visual C++ version 6.0 or later
+ Gcc by mingw.org gcc version 3.2 or later
+ Gcc by mingw-w64.sf.net gcc version 4.4.3 or later
-The last two of these are high quality freeware compilers. Support
-for them is still experimental.
+Note that the last two of these are actually competing projects both
+delivering complete gcc toolchain for MS Windows:
-This port currently supports MakeMaker (the set of modules that
+=over 4
+
+=item L<http://mingw.org>
+
+Delivers gcc toolchain targeting 32-bit Windows platform.
+
+=item L<http://mingw-w64.sf.net>
+
+Delivers gcc toolchain targeting both 64-bit Windows and 32-bit Windows
+platforms (despite the project name "mingw-w64" they are not only 64-bit
+oriented). They deliver the native gcc compilers and cross-compilers
+that are also supported by perl's makefile.
+
+=back
+
+The Microsoft Visual C++ compilers are also now being given away free. They are
+available as "Visual C++ Toolkit 2003" or "Visual C++ 2005/2008/2010 Express
+Edition" (and also as part of the ".NET Framework SDK") and are the same
+compilers that ship with "Visual C++ .NET 2003 Professional" or "Visual C++
+2005/2008/2010 Professional" respectively.
+
+This port can also be built on IA64/AMD64 using:
+
+ Microsoft Platform SDK Nov 2001 (64-bit compiler and tools)
+ MinGW64 compiler (gcc version 4.4.3 or later)
+
+The Windows SDK can be downloaded from L<http://www.microsoft.com/>.
+The MinGW64 compiler is available at L<http://sourceforge.net/projects/mingw-w64>.
+The latter is actually a cross-compiler targeting Win64. There's also a trimmed
+down compiler (no java, or gfortran) suitable for building perl available at:
+L<http://strawberryperl.com/package/kmx/64_gcctoolchain/>
+
+NOTE: If you're using a 32-bit compiler to build perl on a 64-bit Windows
+operating system, then you should set the WIN64 environment variable to "undef".
+Also, the trimmed down compiler only passes tests when USE_ITHREADS *= define
+(as opposed to undef) and when the CFG *= Debug line is commented out.
+
+This port fully supports MakeMaker (the set of modules that
is used to build extensions to perl). Therefore, you should be
able to build and install most extensions found in the CPAN sites.
-See L<Usage Hints> below for general hints about this.
+See L<Usage Hints for Perl on Windows> below for general hints about this.
-=head2 Setting Up
+=head2 Setting Up Perl on Windows
=over 4
-=item Command Shell
+=item Make
-Use the default "cmd" shell that comes with NT. Some versions of the
-popular 4DOS/NT shell have incompatibilities that may cause you trouble.
-If the build fails under that shell, try building again with the cmd
-shell. The nmake Makefile also has known incompatibilites with the
-"command.com" shell that comes with Windows95.
-
-However, there have been reports of successful build attempts using
-4DOS/NT version 6.01 under Windows95, using dmake, but your mileage
-may vary. There is also some basic support for building using dmake
-under command.com. Nevertheless, if building under command.com
-doesn't work, try 4DOS/NT.
+You need a "make" program to build the sources. If you are using
+Visual C++ or the Windows SDK tools, nmake will work. Builds using
+the gcc need dmake.
-The surest way to build it is on Windows NT, using the cmd shell.
+dmake is a freely available make that has very nice macro features
+and parallelability.
-Make sure the path to the build directory does not contain spaces. The
-build usually works in this circumstance, but some tests will fail.
+A port of dmake for Windows is available from:
-=item Borland C++
+L<http://search.cpan.org/dist/dmake/>
-If you are using the Borland compiler, you will need dmake, a freely
-available make that has very nice macro features and parallelability.
-(The make that Borland supplies is seriously crippled, and will not
-work for MakeMaker builds.)
+Fetch and install dmake somewhere on your path.
-A port of dmake for win32 platforms is available from:
+=item Command Shell
- ftp://ftp.linux.activestate.com/pub/staff/gsar/dmake-4.1-win32.zip
+Use the default "cmd" shell that comes with Windows. Some versions of the
+popular 4DOS/NT shell have incompatibilities that may cause you trouble.
+If the build fails under that shell, try building again with the cmd
+shell.
-Fetch and install dmake somewhere on your path (follow the instructions
-in the README.NOW file).
+Make sure the path to the build directory does not contain spaces. The
+build usually works in this circumstance, but some tests will fail.
=item Microsoft Visual C++
The nmake that comes with Visual C++ will suffice for building.
-You will need to run the VCVARS32.BAT file usually found somewhere
-like C:\MSDEV4.2\BIN. This will set your build environment.
+You will need to run the VCVARS32.BAT file, usually found somewhere
+like C:\Program Files\Microsoft Visual Studio\VC98\Bin.
+This will set your build environment.
-You can also use dmake to build using Visual C++, provided:
+You can also use dmake to build using Visual C++; provided, however,
you set OSRELEASE to "microsft" (or whatever the directory name
-under which the Visual C dmake configuration lives) in your environment,
+under which the Visual C dmake configuration lives) in your environment
and edit win32/config.vc to change "make=nmake" into "make=dmake". The
latter step is only essential if you want to use dmake as your default
make for building extensions using MakeMaker.
-=item Mingw32 with EGCS or GCC
+=item Microsoft Visual C++ 2008/2010 Express Edition
+
+These free versions of Visual C++ 2008/2010 Professional contain the same
+compilers and linkers that ship with the full versions, and also contain
+everything necessary to build Perl, rather than requiring a separate download
+of the Windows SDK like previous versions did.
+
+These packages can be downloaded by searching in the Download Center at
+L<http://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact
+links to these packages has proven a pointless task because the links keep on
+changing so often.)
+
+Install Visual C++ 2008/2010 Express, then setup your environment using, e.g.
+
+ C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\vsvars32.bat
+
+(assuming the default installation location was chosen).
+
+Perl should now build using the win32/Makefile. You will need to edit that
+file to set CCTYPE to MSVC90FREE or MSVC100FREE first.
+
+=item Microsoft Visual C++ 2005 Express Edition
+
+This free version of Visual C++ 2005 Professional contains the same compiler
+and linker that ship with the full version, but doesn't contain everything
+necessary to build Perl.
+
+You will also need to download the "Windows SDK" (the "Core SDK" and "MDAC
+SDK" components are required) for more header files and libraries.
+
+These packages can both be downloaded by searching in the Download Center at
+L<http://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact
+links to these packages has proven a pointless task because the links keep on
+changing so often.)
+
+Try to obtain the latest version of the Windows SDK. Sometimes these packages
+contain a particular Windows OS version in their name, but actually work on
+other OS versions too. For example, the "Windows Server 2003 R2 Platform SDK"
+also runs on Windows XP SP2 and Windows 2000.
+
+Install Visual C++ 2005 first, then the Platform SDK. Setup your environment
+as follows (assuming default installation locations were chosen):
+
+ SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK
+
+ SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE;C:\Program Files\Microsoft Visual Studio 8\VC\BIN;C:\Program Files\Microsoft Visual Studio 8\Common7\Tools;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\bin;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\Program Files\Microsoft Visual Studio 8\VC\VCPackages;%PlatformSDKDir%\Bin
+
+ SET INCLUDE=C:\Program Files\Microsoft Visual Studio 8\VC\INCLUDE;%PlatformSDKDir%\include
+
+ SET LIB=C:\Program Files\Microsoft Visual Studio 8\VC\LIB;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\lib;%PlatformSDKDir%\lib
+
+ SET LIBPATH=C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727
+
+(The PlatformSDKDir might need to be set differently depending on which version
+you are using. Earlier versions installed into "C:\Program Files\Microsoft SDK",
+while the latest versions install into version-specific locations such as
+"C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2".)
+
+Perl should now build using the win32/Makefile. You will need to edit that
+file to set
+
+ CCTYPE = MSVC80FREE
+
+and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment setup above.
+
+=item Microsoft Visual C++ Toolkit 2003
+
+This free toolkit contains the same compiler and linker that ship with
+Visual C++ .NET 2003 Professional, but doesn't contain everything
+necessary to build Perl.
+
+You will also need to download the "Platform SDK" (the "Core SDK" and "MDAC
+SDK" components are required) for header files, libraries and rc.exe, and
+".NET Framework SDK" for more libraries and nmake.exe. Note that the latter
+(which also includes the free compiler and linker) requires the ".NET
+Framework Redistributable" to be installed first. This can be downloaded and
+installed separately, but is included in the "Visual C++ Toolkit 2003" anyway.
+
+These packages can all be downloaded by searching in the Download Center at
+L<http://www.microsoft.com/downloads/search.aspx?displaylang=en>. (Providing exact
+links to these packages has proven a pointless task because the links keep on
+changing so often.)
+
+Try to obtain the latest version of the Windows SDK. Sometimes these packages
+contain a particular Windows OS version in their name, but actually work on
+other OS versions too. For example, the "Windows Server 2003 R2 Platform SDK"
+also runs on Windows XP SP2 and Windows 2000.
+
+Install the Toolkit first, then the Platform SDK, then the .NET Framework SDK.
+Setup your environment as follows (assuming default installation locations
+were chosen):
+
+ SET PlatformSDKDir=C:\Program Files\Microsoft Platform SDK
+
+ SET PATH=%SystemRoot%\system32;%SystemRoot%;C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin;%PlatformSDKDir%\Bin;C:\Program Files\Microsoft.NET\SDK\v1.1\Bin
+
+ SET INCLUDE=C:\Program Files\Microsoft Visual C++ Toolkit 2003\include;%PlatformSDKDir%\include;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include
+
+ SET LIB=C:\Program Files\Microsoft Visual C++ Toolkit 2003\lib;%PlatformSDKDir%\lib;C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\lib
+
+(The PlatformSDKDir might need to be set differently depending on which version
+you are using. Earlier versions installed into "C:\Program Files\Microsoft SDK",
+while the latest versions install into version-specific locations such as
+"C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2".)
+
+Several required files will still be missing:
+
+=over 4
+
+=item *
+
+cvtres.exe is required by link.exe when using a .res file. It is actually
+installed by the .NET Framework SDK, but into a location such as the
+following:
+
+ C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322
+
+Copy it from there to %PlatformSDKDir%\Bin
+
+=item *
+
+lib.exe is normally used to build libraries, but link.exe with the /lib
+option also works, so change win32/config.vc to use it instead:
+
+Change the line reading:
+
+ ar='lib'
+
+to:
+
+ ar='link /lib'
+
+It may also be useful to create a batch file called lib.bat in
+C:\Program Files\Microsoft Visual C++ Toolkit 2003\bin containing:
+
+ @echo off
+ link /lib %*
+
+for the benefit of any naughty C extension modules that you might want to build
+later which explicitly reference "lib" rather than taking their value from
+$Config{ar}.
+
+=item *
+
+setargv.obj is required to build perlglob.exe (and perl.exe if the USE_SETARGV
+option is enabled). The Platform SDK supplies this object file in source form
+in %PlatformSDKDir%\src\crt. Copy setargv.c, cruntime.h and
+internal.h from there to some temporary location and build setargv.obj using
+
+ cl.exe /c /I. /D_CRTBLD setargv.c
+
+Then copy setargv.obj to %PlatformSDKDir%\lib
+
+Alternatively, if you don't need perlglob.exe and don't need to enable the
+USE_SETARGV option then you can safely just remove all mention of $(GLOBEXE)
+from win32/Makefile and setargv.obj won't be required anyway.
+
+=back
+
+Perl should now build using the win32/Makefile. You will need to edit that
+file to set
+
+ CCTYPE = MSVC70FREE
-ECGS binaries can be downloaded from:
+and to set CCHOME, CCINCDIR and CCLIBDIR as per the environment setup above.
- ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/mingw32/
+=item Microsoft Platform SDK 64-bit Compiler
-GCC-2.8.1 binaries are available from:
+The nmake that comes with the Platform SDK will suffice for building
+Perl. Make sure you are building within one of the "Build Environment"
+shells available after you install the Platform SDK from the Start Menu.
- http://agnes.dida.physik.uni-essen.de/~janjaap/mingw32/
+=item MinGW release 3 with gcc
-You only need either one of those, not both. Both bundles come with
-Mingw32 libraries and headers. While both of them work to build perl,
-the EGCS binaries are currently favored by the maintainers, since they
-come with more up-to-date Mingw32 libraries.
+Perl can be compiled with gcc from MinGW release 3 and later (using gcc 3.2.x
+and later). It can be downloaded here:
-Make sure you install the binaries as indicated in the web sites
-above. You will need to set up a few environment variables (usually
-run from a batch file).
+L<http://www.mingw.org/>
-You also need dmake. See L</"Borland C++"> above on how to get it.
+You also need dmake. See L</"Make"> above on how to get it.
=back
Make sure you are in the "win32" subdirectory under the perl toplevel.
This directory contains a "Makefile" that will work with
-versions of nmake that come with Visual C++, and a dmake "makefile.mk"
-that will work for all supported compilers. The defaults in the dmake
-makefile are setup to build using the Borland compiler.
+versions of nmake that come with Visual C++ or the Windows SDK, and
+a dmake "makefile.mk" that will work for all supported compilers. The
+defaults in the dmake makefile are setup to build using MinGW/gcc.
=item *
-Edit the makefile.mk (or Makefile, if using nmake) and change the values
-of INST_DRV and INST_TOP. You can also enable various build
-flags.
-
-Beginning with version 5.005, there is experimental support for building
-a perl interpreter that supports the Perl Object abstraction (courtesy
-ActiveState Tool Corp.) PERL_OBJECT uses C++, and the binaries are
-therefore incompatible with the regular C build. However, the
-PERL_OBJECT build does provide something called the C-API, for linking
-it with extensions that won't compile under PERL_OBJECT. Using the C_API
-is typically requested through:
-
- perl Makefile.PL CAPI=TRUE
-
-PERL_OBJECT requires VC++ 5.0 (Service Pack 3 recommended) or later. It
-is not yet supported under GCC or EGCS. WARNING: Binaries built with
-PERL_OBJECT enabled are B<not> compatible with binaries built without.
-Perl installs PERL_OBJECT binaries under a distinct architecture name,
-so they B<can> coexist, though.
-
-Beginning with version 5.005, there is experimental support for building
-a perl interpreter that is capable of native threading. Binaries built
-with thread support enabled are also incompatible with the vanilla C
-build. WARNING: Binaries built with threads enabled are B<not> compatible
-with binaries built without. Perl installs threads enabled binaries under
-a distinct architecture name, so they B<can> coexist, though.
-
-At the present time, you cannot enable both threading and PERL_OBJECT.
-You can get only one of them in a Perl interpreter.
-
-If you have either the source or a library that contains des_fcrypt(),
-enable the appropriate option in the makefile. des_fcrypt() is not
-bundled with the distribution due to US Government restrictions
-on the export of cryptographic software. Nevertheless, this routine
-is part of the "libdes" library (written by Ed Young) which is widely
-available worldwide, usually along with SSLeay (for example:
-"ftp://fractal.mta.ca/pub/crypto/SSLeay/DES/"). Set CRYPT_SRC to the
-name of the file that implements des_fcrypt(). Alternatively, if
-you have built a library that contains des_fcrypt(), you can set
-CRYPT_LIB to point to the library name. The location above contains
-many versions of the "libdes" library, all with slightly different
-implementations of des_fcrypt(). Older versions have a single,
-self-contained file (fcrypt.c) that implements crypt(), so they may be
-easier to use. A patch against the fcrypt.c found in libdes-3.06 is
-in des_fcrypt.patch.
-
-Perl will also build without des_fcrypt(), but the crypt() builtin will
-fail at run time.
-
-You will also have to make sure CCHOME points to wherever you installed
-your compiler.
+Edit the makefile.mk (or Makefile, if you're using nmake) and change
+the values of INST_DRV and INST_TOP. You can also enable various
+build flags. These are explained in the makefiles.
+
+Note that it is generally not a good idea to try to build a perl with
+INST_DRV and INST_TOP set to a path that already exists from a previous
+build. In particular, this may cause problems with the
+lib/ExtUtils/t/Embed.t test, which attempts to build a test program and
+may end up building against the installed perl's lib/CORE directory rather
+than the one being tested.
+
+You will have to make sure that CCTYPE is set correctly and that
+CCHOME points to wherever you installed your compiler.
+
+If building with the cross-compiler provided by
+mingw-w64.sourceforge.net you'll need to uncomment the line that sets
+GCCCROSS in the makefile.mk. Do this only if it's the cross-compiler - ie
+only if the bin folder doesn't contain a gcc.exe. (The cross-compiler
+does not provide a gcc.exe, g++.exe, ar.exe, etc. Instead, all of these
+executables are prefixed with 'x86_64-w64-mingw32-'.)
The default value for CCHOME in the makefiles for Visual C++
may not be correct for some versions. Make sure the default exists
and is valid.
-Other options are explained in the makefiles. Be sure to read the
-instructions carefully.
+You may also need to comment out the C<DELAYLOAD = ...> line in the
+Makefile if you're using VC++ 6.0 without the latest service pack and
+the linker reports an internal error.
+
+If you want build some core extensions statically into perl's dll, specify
+them in the STATIC_EXT macro.
+
+Be sure to read the instructions near the top of the makefiles carefully.
=item *
Type "dmake" (or "nmake" if you are using that make).
This should build everything. Specifically, it will create perl.exe,
-perl.dll (or perl56.dll), and perlglob.exe at the perl toplevel, and
-various other extension dll's under the lib\auto directory. If the build
-fails for any reason, make sure you have done the previous steps correctly.
-
-The build process may produce "harmless" compiler warnings (more or
-less copiously, depending on how picky your compiler gets). The
-maintainers are aware of these warnings, thankyouverymuch. :)
-
-When building using Visual C++, a perl95.exe will also get built. This
-executable is only needed on Windows95, and should be used instead of
-perl.exe, and then only if you want sockets to work properly on Windows95.
-This is necessitated by a bug in the Microsoft C Runtime that cannot be
-worked around in the "normal" perl.exe. perl95.exe gets built with its
-own private copy of the C Runtime that is not accessible to extensions
-(which see the DLL version of the CRT). Be aware, therefore, that this
-perl95.exe will have esoteric problems with extensions like perl/Tk that
-themselves use the C Runtime heavily, or want to free() pointers
-malloc()-ed by perl.
-
-You can avoid the perl95.exe problems completely if you either enable
-USE_PERLCRT with Visual C++, or use Borland C++ for building perl. In
-those cases, perl95.exe is not needed and will not be built.
+perl517.dll at the perl toplevel, and various other extension dll's
+under the lib\auto directory. If the build fails for any reason, make
+sure you have done the previous steps correctly.
=back
-=head2 Testing
+=head2 Testing Perl on Windows
Type "dmake test" (or "nmake test"). This will run most of the tests from
-the testsuite (many tests will be skipped, and but no test should fail).
+the testsuite (many tests will be skipped).
-If some tests do fail, it may be because you are using a different command
-shell than the native "cmd.exe", or because you are building from a path
-that contains spaces. So don't do that.
+There should be no test failures.
+
+Some test failures may occur if you use a command shell other than the
+native "cmd.exe", or if you are building from a path that contains
+spaces. So don't do that.
If you are running the tests from a emacs shell window, you may see
failures in op/stat.t. Run "dmake test-notty" in that case.
-If you're using the Borland compiler, you may see a failure in op/taint.t
-arising from the inability to find the Borland Runtime DLLs on the system
-default path. You will need to copy the DLLs reported by the messages
-from where Borland chose to install it, into the Windows system directory
-(usually somewhere like C:\WINNT\SYSTEM32), and rerun the test.
+If you run the tests on a FAT partition, you may see some failures for
+C<link()> related tests (I<op/write.t>, I<op/stat.t> ...). Testing on
+NTFS avoids these errors.
-The Visual C runtime apparently has a bug that causes posix.t to fail
-test#2. This usually happens only if you extracted the files in text
-mode. Enable the USE_PERLCRT option in the Makefile to fix this bug.
+Furthermore, you should make sure that during C<make test> you do not
+have any GNU tool packages in your path: some toolkits like Unixutils
+include some tools (C<type> for instance) which override the Windows
+ones and makes tests fail. Remove them from your path while testing to
+avoid these errors.
Please report any other failures as described under L<BUGS AND CAVEATS>.
-=head2 Installation
+=head2 Installation of Perl on Windows
Type "dmake install" (or "nmake install"). This will put the newly
built perl and the libraries under whatever C<INST_TOP> points to in the
Makefile. It will also install the pod documentation under
-C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under
-C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed,
-you will need to add two components to your PATH environment variable,
-C<$INST_TOP\$VERSION\bin>, and C<$INST_TOP\$VERSION\bin\$ARCHNAME>.
-For example:
+C<$INST_TOP\$INST_VER\lib\pod> and HTML versions of the same under
+C<$INST_TOP\$INST_VER\lib\pod\html>.
+
+To use the Perl you just installed you will need to add a new entry to
+your PATH environment variable: C<$INST_TOP\bin>, e.g.
- set PATH c:\perl\5.005\bin;c:\perl\5.005\bin\MSWin32-x86;%PATH%
+ set PATH=c:\perl\bin;%PATH%
+If you opted to uncomment C<INST_VER> and C<INST_ARCH> in the makefile
+then the installation structure is a little more complicated and you will
+need to add two new PATH components instead: C<$INST_TOP\$INST_VER\bin> and
+C<$INST_TOP\$INST_VER\bin\$ARCHNAME>, e.g.
-=head2 Usage Hints
+ set PATH=c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%
+
+=head2 Usage Hints for Perl on Windows
=over 4
Entries in the former override entries in the latter. One or more of the
following entries (of type REG_SZ or REG_EXPAND_SZ) may be set:
- lib-$] version-specific path to add to @INC
- lib path to add to @INC
- sitelib-$] version-specific path to add to @INC
- sitelib path to add to @INC
+ lib-$] version-specific standard library path to add to @INC
+ lib standard library path to add to @INC
+ sitelib-$] version-specific site library path to add to @INC
+ sitelib site library path to add to @INC
+ vendorlib-$] version-specific vendor library path to add to @INC
+ vendorlib vendor library path to add to @INC
PERL* fallback for all %ENV lookups that begin with "PERL"
Note the C<$]> in the above is not literal. Substitute whatever version
-of perl you want to honor that entry, e.g. C<5.00502>. Paths must be
-separated with semicolons, as usual on win32.
+of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be
+separated with semicolons, as usual on Windows.
=item File Globbing
-By default, perl spawns an external program to do file globbing.
-The install process installs both a perlglob.exe and a perlglob.bat
-that perl can use for this purpose. Note that with the default
-installation, perlglob.exe will be found by the system before
-perlglob.bat.
-
-perlglob.exe relies on the argv expansion done by the C Runtime of
-the particular compiler you used, and therefore behaves very
-differently depending on the Runtime used to build it. To preserve
-compatiblity, perlglob.bat (a perl script that can be used portably)
-is installed. Besides being portable, perlglob.bat also offers
-enhanced globbing functionality.
-
-If you want perl to use perlglob.bat instead of perlglob.exe, just
-delete perlglob.exe from the install location (or move it somewhere
-perl cannot find). Using File::DosGlob.pm (which implements the core
-functionality of perlglob.bat) to override the internal CORE::glob()
-works about 10 times faster than spawing perlglob.exe, and you should
-take this approach when writing new modules. See File::DosGlob for
+By default, perl handles file globbing using the File::Glob extension,
+which provides portable globbing.
+
+If you want perl to use globbing that emulates the quirks of DOS
+filename conventions, you might want to consider using File::DosGlob
+to override the internal glob() implementation. See L<File::DosGlob> for
details.
=item Using perl from the command line
If you are accustomed to using perl from various command-line
shells found in UNIX environments, you will be less than pleased
-with what Windows NT offers by way of a command shell.
-
-The crucial thing to understand about the "cmd" shell (which is
-the default on Windows NT) is that it does not do any wildcard
-expansions of command-line arguments (so wildcards need not be
-quoted). It also provides only rudimentary quoting. The only
-(useful) quote character is the double quote ("). It can be used to
-protect spaces in arguments and other special characters. The
-Windows NT documentation has almost no description of how the
-quoting rules are implemented, but here are some general observations
-based on experiments: The shell breaks arguments at spaces and
-passes them to programs in argc/argv. Doublequotes can be used
-to prevent arguments with spaces in them from being split up.
-You can put a double quote in an argument by escaping it with
-a backslash and enclosing the whole argument within double quotes.
-The backslash and the pair of double quotes surrounding the
-argument will be stripped by the shell.
-
-The file redirection characters "<", ">", and "|" cannot be quoted
-by double quotes (there are probably more such). Single quotes
-will protect those three file redirection characters, but the
-single quotes don't get stripped by the shell (just to make this
-type of quoting completely useless). The caret "^" has also
-been observed to behave as a quoting character (and doesn't get
-stripped by the shell also).
+with what Windows offers by way of a command shell.
+
+The crucial thing to understand about the Windows environment is that
+the command line you type in is processed twice before Perl sees it.
+First, your command shell (usually CMD.EXE) preprocesses the command
+line, to handle redirection, environment variable expansion, and
+location of the executable to run. Then, the perl executable splits
+the remaining command line into individual arguments, using the
+C runtime library upon which Perl was built.
+
+It is particularly important to note that neither the shell nor the C
+runtime do any wildcard expansions of command-line arguments (so
+wildcards need not be quoted). Also, the quoting behaviours of the
+shell and the C runtime are rudimentary at best (and may, if you are
+using a non-standard shell, be inconsistent). The only (useful) quote
+character is the double quote ("). It can be used to protect spaces
+and other special characters in arguments.
+
+The Windows documentation describes the shell parsing rules here:
+L<http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/cmd.mspx?mfr=true>
+and the C runtime parsing rules here:
+L<http://msdn.microsoft.com/en-us/library/17w5ykft%28v=VS.100%29.aspx>.
+
+Here are some further observations based on experiments: The C runtime
+breaks arguments at spaces and passes them to programs in argc/argv.
+Double quotes can be used to prevent arguments with spaces in them from
+being split up. You can put a double quote in an argument by escaping
+it with a backslash and enclosing the whole argument within double quotes.
+The backslash and the pair of double quotes surrounding the argument will
+be stripped by the C runtime.
+
+The file redirection characters "E<lt>", "E<gt>", and "|" can be quoted by
+double quotes (although there are suggestions that this may not always
+be true). Single quotes are not treated as quotes by the shell or
+the C runtime, they don't get stripped by the shell (just to make
+this type of quoting completely useless). The caret "^" has also
+been observed to behave as a quoting character, but this appears
+to be a shell feature, and the caret is not stripped from the command
+line, so Perl still sees it (and the C runtime phase does not treat
+the caret as a quote character).
Here are some examples of usage of the "cmd" shell:
perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less
-Discovering the usefulness of the "command.com" shell on Windows95
+Discovering the usefulness of the "command.com" shell on Windows 9x
is left as an exercise to the reader :)
+One particularly pernicious problem with the 4NT command shell for
+Windows is that it (nearly) always treats a % character as indicating
+that environment variable expansion is needed. Under this shell, it is
+therefore important to always double any % characters which you want
+Perl to see (for example, for hash variables), even when they are
+quoted.
+
=item Building Extensions
The Comprehensive Perl Archive Network (CPAN) offers a wealth
of extensions, some of which require a C compiler to build.
-Look in http://www.perl.com/ for more information on CPAN.
+Look in L<http://www.cpan.org/> for more information on CPAN.
+
+Note that not all of the extensions available from CPAN may work
+in the Windows environment; you should check the information at
+L<http://testers.cpan.org/> before investing too much effort into
+porting modules that don't readily build.
Most extensions (whether they require a C compiler or not) can
be built, tested and installed with the standard mantra:
where $MAKE is whatever 'make' program you have configured perl to
use. Use "perl -V:make" to find out what this is. Some extensions
-may not provide a testsuite (so "$MAKE test" may not do anything, or
+may not provide a testsuite (so "$MAKE test" may not do anything or
fail), but most serious ones do.
It is important that you use a supported 'make' program, and
ensure Config.pm knows about it. If you don't have nmake, you can
-either get dmake from the location mentioned earlier, or get an
+either get dmake from the location mentioned earlier or get an
old version of nmake reportedly available from:
- ftp://ftp.microsoft.com/Softlib/MSLFILES/nmake15.exe
+L<http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe>
Another option is to use the make written in Perl, available from
-CPAN:
+CPAN.
- http://www.perl.com/CPAN/authors/id/NI-S/Make-0.03.tar.gz
+L<http://www.cpan.org/modules/by-module/Make/>
+
+You may also use dmake. See L</"Make"> above on how to get it.
Note that MakeMaker actually emits makefiles with different syntax
depending on what 'make' it thinks you are using. Therefore, it is
alternate shell that *does* expand wildcards.
Instead, the following solution works rather well. The nice things
-about it: 1) you can start using it right away 2) it is more powerful,
-because it will do the right thing with a pattern like */*/*.c
-3) you can decide whether you do/don't want to use it 4) you can
-extend the method to add any customizations (or even entirely
-different kinds of wildcard expansion).
+about it are 1) you can start using it right away; 2) it is more
+powerful, because it will do the right thing with a pattern like
+*/*/*.c; 3) you can decide whether you do/don't want to use it; and
+4) you can extend the method to add any customizations (or even
+entirely different kinds of wildcard expansion).
C:\> copy con c:\perl\lib\Wild.pm
# Wild.pm - emulate shell @ARGV expansion on shells that don't
what you want if you use a shell that does that for you. The expansion
done is also somewhat less powerful than the approach suggested above.
-=item Win32 Specific Extensions
+=item Notes on 64-bit Windows
+
+Windows .NET Server supports the LLP64 data model on the Intel Itanium
+architecture.
+
+The LLP64 data model is different from the LP64 data model that is the
+norm on 64-bit Unix platforms. In the former, C<int> and C<long> are
+both 32-bit data types, while pointers are 64 bits wide. In addition,
+there is a separate 64-bit wide integral type, C<__int64>. In contrast,
+the LP64 data model that is pervasive on Unix platforms provides C<int>
+as the 32-bit type, while both the C<long> type and pointers are of
+64-bit precision. Note that both models provide for 64-bits of
+addressability.
+
+64-bit Windows running on Itanium is capable of running 32-bit x86
+binaries transparently. This means that you could use a 32-bit build
+of Perl on a 64-bit system. Given this, why would one want to build
+a 64-bit build of Perl? Here are some reasons why you would bother:
+
+=over
-A number of extensions specific to the Win32 platform are available
-from CPAN. You may find that many of these extensions are meant to
-be used under the Activeware port of Perl, which used to be the only
-native port for the Win32 platform. Since the Activeware port does not
-have adequate support for Perl's extension building tools, these
-extensions typically do not support those tools either, and therefore
-cannot be built using the generic steps shown in the previous section.
+=item *
-To ensure smooth transitioning of existing code that uses the
-ActiveState port, there is a bundle of Win32 extensions that contains
-all of the ActiveState extensions and most other Win32 extensions from
-CPAN in source form, along with many added bugfixes, and with MakeMaker
-support. This bundle is available at:
+A 64-bit native application will run much more efficiently on
+Itanium hardware.
- http://www.perl.com/CPAN/authors/id/GSAR/libwin32-0.14.zip
+=item *
-See the README in that distribution for building and installation
-instructions. Look for later versions that may be available at the
-same location.
+There is no 2GB limit on process size.
-=item Running Perl Scripts
+=item *
+
+Perl automatically provides large file support when built under
+64-bit Windows.
+
+=item *
+
+Embedding Perl inside a 64-bit application.
+
+=back
+
+=back
+
+=head2 Running Perl Scripts
Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to
indicate to the OS that it should execute the file using perl.
-Win32 has no comparable means to indicate arbitrary files are
+Windows has no comparable means to indicate arbitrary files are
executables.
Instead, all available methods to execute plain text files on
-Win32 rely on the file "extension". There are three methods
+Windows rely on the file "extension". There are three methods
to use this to execute perl scripts:
=over 8
=item 1
-There is a facility called "file extension associations" that will
-work in Windows NT 4.0. This can be manipulated via the two
-commands "assoc" and "ftype" that come standard with Windows NT
-4.0. Type "ftype /?" for a complete example of how to set this
-up for perl scripts (Say what? You thought Windows NT wasn't
-perl-ready? :).
+There is a facility called "file extension associations". This can be
+manipulated via the two commands "assoc" and "ftype" that come
+standard with Windows. Type "ftype /?" for a complete example of how
+to set this up for perl scripts (Say what? You thought Windows
+wasn't perl-ready? :).
=item 2
refer to all the command line arguments, so you may need to make
sure that construct works in batch files. As of this writing,
4DOS/NT users will need a "ParameterChar = *" statement in their
-4NT.INI file, or will need to execute "setdos /p*" in the 4DOS/NT
+4NT.INI file or will need to execute "setdos /p*" in the 4DOS/NT
startup file to enable this to work.
=item 3
A script called "runperl.bat" is available that can be copied
to any filename (along with the .bat suffix). For example,
if you call it "foo.bat", it will run the file "foo" when it is
-executed. Since you can run batch files on Win32 platforms simply
+executed. Since you can run batch files on Windows platforms simply
by typing the name (without the extension), this effectively
runs the file "foo", when you type either "foo" or "foo.bat".
With this method, "foo.bat" can even be in a different location
=back
-=item Miscellaneous Things
+=head2 Miscellaneous Things
A full set of HTML documentation is installed, so you should be
able to use it if you have a web browser installed on your
C<perldoc> is also a useful tool for browsing information contained
in the documentation, especially in conjunction with a pager
-like C<less> (recent versions of which have Win32 support). You may
+like C<less> (recent versions of which have Windows support). You may
have to set the PAGER environment variable to use a specific pager.
"perldoc -f foo" will print information about the perl operator
"foo".
+One common mistake when using this port with a GUI library like C<Tk>
+is assuming that Perl's normal behavior of opening a command-line
+window will go away. This isn't the case. If you want to start a copy
+of C<perl> without opening a command-line window, use the C<wperl>
+executable built during the installation process. Usage is exactly
+the same as normal C<perl> on Windows, except that options like C<-h>
+don't work (since they need a command-line window to print to).
+
If you find bugs in perl, you can run C<perlbug> to create a
bug report (you may have to send it manually if C<perlbug> cannot
find a mailer on your system).
-=back
-
=head1 BUGS AND CAVEATS
-An effort has been made to ensure that the DLLs produced by the two
-supported compilers are compatible with each other (despite the
-best efforts of the compiler vendors). Extension binaries produced
-by one compiler should also coexist with a perl binary built by
-a different compiler. In order to accomplish this, PERL.DLL provides
-a layer of runtime code that uses the C Runtime that perl was compiled
-with. Extensions which include "perl.h" will transparently access
-the functions in this layer, thereby ensuring that both perl and
-extensions use the same runtime functions.
-
-If you have had prior exposure to Perl on Unix platforms, you will notice
-this port exhibits behavior different from what is documented. Most of the
-differences fall under one of these categories. We do not consider
-any of them to be serious limitations (especially when compared to the
-limited nature of some of the Win32 OSes themselves :)
-
-=over 8
-
-=item *
-
-C<stat()> and C<lstat()> functions may not behave as documented. They
-may return values that bear no resemblance to those reported on Unix
-platforms, and some fields (like the the one for inode) may be completely
-bogus.
-
-=item *
-
-The following functions are currently unavailable: C<fork()>,
-C<dump()>, C<chown()>, C<link()>, C<symlink()>, C<chroot()>,
-C<setpgrp()> and related security functions, C<setpriority()>,
-C<getpriority()>, C<syscall()>, C<fcntl()>, C<getpw*()>,
-C<msg*()>, C<shm*()>, C<sem*()>, C<alarm()>, C<socketpair()>,
-C<*netent()>, C<*protoent()>, C<*servent()>, C<*hostent()>,
-C<getnetby*()>.
-This list is possibly incomplete.
-
-=item *
-
-Various C<socket()> related calls are supported, but they may not
-behave as on Unix platforms.
-
-=item *
-
-The four-argument C<select()> call is only supported on sockets.
-
-=item *
-
-The C<ioctl()> call is only supported on sockets (where it provides the
-functionality of ioctlsocket() in the Winsock API).
-
-=item *
+Norton AntiVirus interferes with the build process, particularly if
+set to "AutoProtect, All Files, when Opened". Unlike large applications
+the perl build process opens and modifies a lot of files. Having the
+the AntiVirus scan each and every one slows build the process significantly.
+Worse, with PERLIO=stdio the build process fails with peculiar messages
+as the virus checker interacts badly with miniperl.exe writing configure
+files (it seems to either catch file part written and treat it as suspicious,
+or virus checker may have it "locked" in a way which inhibits miniperl
+updating it). The build does complete with
-Failure to spawn() a subprocess is indicated by setting $? to "255 << 8".
-C<$?> is set in a way compatible with Unix (i.e. the exitstatus of the
-subprocess is obtained by "$? >> 8", as described in the documentation).
+ set PERLIO=perlio
-=item *
+but that may be just luck. Other AntiVirus software may have similar issues.
-You can expect problems building modules available on CPAN if you
-build perl itself with -DUSE_THREADS. These problems should be resolved
-as we get closer to 5.005.
+Some of the built-in functions do not act exactly as documented in
+L<perlfunc>, and a few are not implemented at all. To avoid
+surprises, particularly if you have had prior exposure to Perl
+in other operating environments or if you intend to write code
+that will be portable to other environments, see L<perlport>
+for a reasonably definitive list of these differences.
-=item *
+Not all extensions available from CPAN may build or work properly
+in the Windows environment. See L</"Building Extensions">.
-C<utime()>, C<times()> and process-related functions may not
-behave as described in the documentation, and some of the
-returned values or effects may be bogus.
-
-=item *
+Most C<socket()> related calls are supported, but they may not
+behave as on Unix platforms. See L<perlport> for the full list.
Signal handling may not behave as on Unix platforms (where it
doesn't exactly "behave", either :). For instance, calling C<die()>
or C<exit()> from signal handlers will cause an exception, since most
-implementations of C<signal()> on Win32 are severely crippled.
+implementations of C<signal()> on Windows are severely crippled.
Thus, signals may work only for simple things like setting a flag
variable in the handler. Using signals under this port should
currently be considered unsupported.
-=item *
-
-C<kill()> is implemented, but doesn't have the semantics of
-C<raise()>, i.e. it doesn't send a signal to the identified process
-like it does on Unix platforms. Instead it immediately calls
-C<TerminateProcess(process,signal)>. Thus the signal argument is
-used to set the exit-status of the terminated process. In particular,
-C<kill(0,$pid)> will kill the process identified by C<$pid> (unlike
-on Unix). This behavior may change in future.
+Please send detailed descriptions of any problems and solutions that
+you may find to E<lt>F<perlbug@perl.org>E<gt>, along with the output
+produced by C<perl -V>.
-=item *
+=head1 ACKNOWLEDGEMENTS
-File globbing may not behave as on Unix platforms. In particular,
-if you don't use perlglob.bat for globbing, it will understand
-wildcards only in the filename component (and not in the pathname).
-In other words, something like "print <*/*.pl>" will not print all the
-perl scripts in all the subdirectories one level under the current one
-(like it does on UNIX platforms). perlglob.exe is also dependent on
-the particular implementation of wildcard expansion in the vendor
-libraries used to build it (which varies wildly at the present time).
-Using perlglob.bat (or File::DosGlob) avoids these limitations, but
-still only provides DOS semantics (read "warts") for globbing.
-
-=back
-
-Please send detailed descriptions of any problems and solutions that
-you may find to <F<perlbug@perl.com>>, along with the output produced
-by C<perl -V>.
+The use of a camel with the topic of Perl is a trademark
+of O'Reilly and Associates, Inc. Used with permission.
=head1 AUTHORS
=over 4
-Gary Ng E<lt>71564.1743@CompuServe.COME<gt>
+=item Gary Ng E<lt>71564.1743@CompuServe.COME<gt>
+
+=item Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>
+
+=item Nick Ing-Simmons E<lt>nick@ing-simmons.netE<gt>
-Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>
+=item Jan Dubois E<lt>jand@activestate.comE<gt>
-Nick Ing-Simmons E<lt>nick@ni-s.u-net.comE<gt>
+=item Steve Hay E<lt>steve.m.hay@googlemail.comE<gt>
=back
-This document is maintained by Gurusamy Sarathy.
+This document is maintained by Jan Dubois.
=head1 SEE ALSO
This port was originally contributed by Gary Ng around 5.003_24,
and borrowed from the Hip Communications port that was available
-at the time.
-
-Nick Ing-Simmons and Gurusamy Sarathy have made numerous and
-sundry hacks since then.
-
-Borland support was added in 5.004_01 (Gurusamy Sarathy).
+at the time. Various people have made numerous and sundry hacks
+since then.
GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).
Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).
-Last updated: 18 January 1999
+Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).
-=cut
+Win9x support was added in 5.6 (Benjamin Stuhl).
+
+Support for 64-bit Windows added in 5.8 (ActiveState Corp).
+Last updated: 10 September 2011
+
+=cut
https://perl5.git.perl.org / perl5.git / blobdiff