*/
#$d_getgrps HAS_GETGROUPS /**/
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
/* HAS_UNAME:
* This symbol, if defined, indicates that the C program may use the
* uname() routine to derive the host name. See also HAS_GETHOSTNAME
* and PHOSTNAME.
*/
+/* PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name. See also HAS_GETHOSTNAME and HAS_UNAME.
+ * Note that the command uses a fully qualified path, so that it is safe
+ * even if used by a process with super-user privileges.
+ */
+#$d_gethname HAS_GETHOSTNAME /**/
#$d_uname HAS_UNAME /**/
+#$d_phostname PHOSTNAME "$aphostname" /* How to get the host name */
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
*/
#$d_void_closedir VOID_CLOSEDIR /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#$d_fd_set HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
*/
#$d_sigaction HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
* output. This symbol will have the value "-" if CPPSTDIN needs a minus
* to specify standard input, otherwise the value is "".
*/
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
#define CPPSTDIN "$cppstdin"
#define CPPMINUS "$cppminus"
+#define CPPRUN "$cpprun"
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
*/
#$d_access HAS_ACCESS /**/
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-#$d_socket HAS_SOCKET /**/
-#$d_sockpair HAS_SOCKETPAIR /**/
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg is supported
+ * to send messages between sockets. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * (BSD 4.3 or 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * (BSD 4.4) is supported. You will also need struct
+ * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
+ */
+#$d_socket HAS_SOCKET /**/
+#$d_sockpair HAS_SOCKETPAIR /**/
+#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
+#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
+#$d_msg_oob HAS_MSG_OOB /**/
+#$d_msg_peek HAS_MSG_PEEK /**/
+#$d_msg_proxy HAS_MSG_PROXY /**/
+#$d_scm_rights HAS_SCM_RIGHTS /**/
+#$d_sendmsg HAS_SENDMSG /**/
+#$d_recvmsg HAS_RECVMSG /**/
+#$d_msghdr_s HAS_STRUCT_MSGHDR /**/
+#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
#$d_pwgecos PWGECOS /**/
#$d_pwpasswd PWPASSWD /**/
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+#$i_sysuio I_SYSUIO /**/
+
/* Free_t:
* This variable contains the return type of free(). It is usually
* void, but occasionally int.
* the sig_name list.
*/
#define SIG_NAME $sig_name_init /**/
-#define SIG_NUM $sig_num /**/
+#define SIG_NUM $sig_num_init /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
*/
#$d_ftello HAS_FTELLO /**/
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
+ */
+#$d_readv HAS_READV /**/
+
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
#$d_sfio USE_SFIO /**/
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to do stat filesystems of file descriptors.
+ */
+/* HAS_STRUCT_STATFS_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem holding the file.
+ * This kind of struct statfs is coming from sys/mount.h (BSD)
+ * and not from sys/statfs.h (SYSV).
+ */
+#$d_fstatfs HAS_FSTATFS /**/
+#$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to do stat filesystems of file descriptors.
+ */
+#$d_fstatvfs HAS_FSTATVFS /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir _((DIR*));
+ */
+#$d_telldirproto HAS_TELLDIR_PROTO /**/
+
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
+ */
+#$d_writev HAS_WRITEV /**/
+
/* HAS_DBMINIT64:
* This symbol, if defined, indicates that the dbminit64 routine is
* available to open dbm files larger than 2 gigabytes.
#$i_inttypes I_INTTYPES /**/
#$d_int64t HAS_INT64_T /**/
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
+ */
+#$i_mntent I_MNTENT /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included.
+ */
+#$i_poll I_POLL /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
+ */
+#$i_sysmount I_SYS_MOUNT /**/
+
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
+ */
+#$i_sysstatvfs I_SYS_STATVFS /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+
/* HAS_FSTAT64:
* This symbol, if defined, indicates that the fstat64 routine is
* available to stat files (fds) larger than 2 gigabytes.
#$d_telldir64 HAS_TELLDIR64 /**/
#$d_truncate64 HAS_TRUNCATE64 /**/
#$d_off64t HAS_OFF64_T /**/
-#$d_dirent64s HAS_STRUCT_DIRENT64 /**/
+#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
*/
#$use64bits USE_64_BITS /**/
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#$usemultiplicity MULTIPLICITY /**/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
*/
#define ARCHNAME "$archname" /**/
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
/* SCHED_YIELD:
* This symbol defines the way to yield the execution of
* the current thread. Known ways are sched_yield,
* pthread_yield, and pthread_yield with NULL.
*/
-#define SCHED_YIELD $sched_yield /**/
-
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
- */
-#$d_pthreads_created_joinable PTHREADS_CREATED_JOINABLE /**/
-
-/* PTHREAD_SETDETACHSTATE_POINTER:
- * This symbol, if defined, indicates that the second argument of
- * pthread_attr_setdetachstate is a pointer to an int, as opposed
- * to an int.
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
*/
-#$pthread_setdetachstate_pointer PTHREAD_SETDETACHSTATE_POINTER /**/
+#$d_pthread_yield HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD $sched_yield /**/
+#$d_sched_yield HAS_SCHED_YIELD /**/
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
*/
-#$usemultiplicity MULTIPLICITY /**/
+#$i_machcthr I_MACH_CTHREADS /**/
/* USE_THREADS:
* This symbol, if defined, indicates that Perl should
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
#define Off_t $lseektype /* <offset> type */
+#define LSEEKSIZE $lseeksize /* <offset> size */
/* Mode_t:
* This symbol holds the type used to declare file modes
https://perl5.git.perl.org / perl5.git / blobdiff