C<redo>, C<return>, C<sub>, C<__SUB__>, C<wantarray>
C<break> is available only if you enable the experimental C<"switch">
-feature or use the C<CORE::> prefix. The C<"switch"> feature also enables
+feature or use the C<CORE::> prefix. The C<"switch"> feature also enables
the C<default>, C<given> and C<when> statements, which are documented in
-L<perlsyn/"Switch Statements">. The C<"switch"> feature is enabled
+L<perlsyn/"Switch Statements">. The C<"switch"> feature is enabled
automatically with a C<use v5.10> (or higher) declaration in the current
-scope. In Perl v5.14 and earlier, C<continue> required the C<"switch">
+scope. In Perl v5.14 and earlier, C<continue> required the C<"switch">
feature, like the other keywords.
C<evalbytes> is only available with the C<"evalbytes"> feature (see
L<feature>) or if prefixed with C<CORE::>. C<__SUB__> is only available
-with the C<"current_sub"> feature or if prefixed with C<CORE::>. Both
+with the C<"current_sub"> feature or if prefixed with C<CORE::>. Both
the C<"evalbytes"> and C<"current_sub"> features are enabled automatically
with a C<use v5.16> (or higher) declaration in the current scope.
operator takes one argument, either a filename, a filehandle, or a dirhandle,
and tests the associated file to see if something is true about it. If the
argument is omitted, tests C<$_>, except for C<-t>, which tests STDIN.
-Unless otherwise documented, it returns C<1> for true and C<''> for false, or
-the undefined value if the file doesn't exist. Despite the funny
-names, precedence is the same as any other named unary operator. The
-operator may be any of:
+Unless otherwise documented, it returns C<1> for true and C<''> for false.
+If the file doesn't exist or can't be examined, it returns C<undef> and
+sets C<$!> (errno). Despite the funny names, precedence is the same as any
+other named unary operator. The operator may be any of:
-r File is readable by effective uid/gid.
-w File is writable by effective uid/gid.
As of Perl 5.10.0, as a form of purely syntactic sugar, you can stack file
test operators, in a way that C<-f -w -x $file> is equivalent to
-C<-x $file && -w _ && -f _>. (This is only fancy fancy: if you use
+C<-x $file && -w _ && -f _>. (This is only fancy syntax: if you use
the return value of C<-f $file> as an argument to another filetest
operator, no special magic will happen.)
=for Pod::Functions get context of the current subroutine call
-Returns the context of the current subroutine call. In scalar context,
-returns the caller's package name if there I<is> a caller (that is, if
+Returns the context of the current pure perl subroutine call. In scalar
+context, returns the caller's package name if there I<is> a caller (that is, if
we're in a subroutine or C<eval> or C<require>) and the undefined value
-otherwise. In list context, returns
+otherwise. caller never returns XS subs and they are skipped. The next pure
+perl sub will appear instead of the XS sub in caller's return values. In list
+context, caller returns
# 0 1 2
($package, $filename, $line) = caller;
$wantarray, $evaltext, $is_require, $hints, $bitmask, $hinthash)
= caller($i);
-Here $subroutine may be C<(eval)> if the frame is not a subroutine
-call, but an C<eval>. In such a case additional elements $evaltext and
+Here, $subroutine is the function that the caller called (rather than the
+function containing the caller). Note that $subroutine may be C<(eval)> if
+the frame is not a subroutine call, but an C<eval>. In such a case
+additional elements $evaltext and
C<$is_require> are set: C<$is_require> is true if the frame is created by a
C<require> or C<use> statement, $evaltext contains the text of the
C<eval EXPR> statement. In particular, for an C<eval BLOCK> statement,
# ...
}
-If VARIABLE is a hash, it chomps the hash's values, but not its keys.
+If VARIABLE is a hash, it chomps the hash's values, but not its keys,
+resetting the C<each> iterator in the process.
You can actually chomp anything that's an lvalue, including an assignment:
Chops off the last character of a string and returns the character
chopped. It is much more efficient than C<s/.$//s> because it neither
scans nor copies the string. If VARIABLE is omitted, chops C<$_>.
-If VARIABLE is a hash, it chops the hash's values, but not its keys.
+If VARIABLE is a hash, it chops the hash's values, but not its keys,
+resetting the C<each> iterator in the process.
You can actually chop anything that's an lvalue, including an assignment.
use POSIX qw(sysconf _PC_CHOWN_RESTRICTED);
$can_chown_giveaway = not sysconf(_PC_CHOWN_RESTRICTED);
-Portability issues: L<perlport/chmod>.
+Portability issues: L<perlport/chown>.
=item chr NUMBER
X<chr> X<character> X<ASCII> X<Unicode>
reasons, this call is restricted to the superuser. If FILENAME is
omitted, does a C<chroot> to C<$_>.
+B<NOTE:> It is good security practice to do C<chdir("/")> (to the root
+directory) immediately after a C<chroot()>.
+
Portability issues: L<perlport/chroot>.
=item close FILEHANDLE
delete() may also be used on arrays and array slices, but its behavior is less
straightforward. Although exists() will return false for deleted entries,
deleting array elements never changes indices of existing values; use shift()
-or splice() for that. However, if all deleted elements fall at the end of an
+or splice() for that. However, if any deleted elements fall at the end of an
array, the array's size shrinks to the position of the highest element that
-still tests true for exists(), or to 0 if none do.
+still tests true for exists(), or to 0 if none do. In other words, an
+array won't have trailing nonexistent elements after a delete.
B<WARNING:> Calling delete on array values is deprecated and likely to
be removed in a future version of Perl.
C<next>, C<last>, or C<redo> cannot be used to leave or restart the block.
See L<perlsyn> for alternative strategies.
-=item do SUBROUTINE(LIST)
-X<do>
-
-This form of subroutine call is deprecated. SUBROUTINE can be a bareword
-or scalar variable.
-
=item do EXPR
X<do>
(not the value) in a hash, or the index in an array.
Hash entries are returned in an apparently random order. The actual random
-order is subject to change in future versions of Perl, but it is
-guaranteed to be in the same order as either the C<keys> or C<values>
-function would produce on the same (unmodified) hash. Since Perl
-5.8.2 the ordering can be different even between different runs of Perl
-for security reasons (see L<perlsec/"Algorithmic Complexity Attacks">).
+order is specific to a given hash; the exact same series of operations
+on two hashes may result in a different order for each hash. Any insertion
+into the hash may change the order, as will any deletion, with the exception
+that the most recent key returned by C<each> or C<keys> may be deleted
+without changing the order. So long as a given hash is unmodified you may
+rely on C<keys>, C<values> and C<each> to repeatedly return the same order
+as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for
+details on why hash order is randomized. Aside from the guarantees
+provided here the exact details of Perl's hash algorithm and the hash
+traversal order are subject to change in any release of Perl.
After C<each> has returned all entries from the hash or array, the next
call to C<each> returns the empty list in list context and C<undef> in
C<keys>, and C<values>. The iterator is implicitly reset when C<each> has
reached the end as just described; it can be explicitly reset by calling
C<keys> or C<values> on the hash or array. If you add or delete a hash's
-elements while iterating over it, entries may be skipped or duplicated--so
-don't do that. Exception: In the current implementation, it is always safe
-to delete the item most recently returned by C<each()>, so the following
-code works properly:
+elements while iterating over it, the effect on the iterator is
+unspecified; for example, entries may be skipped or duplicated--so don't
+do that. Exception: It is always safe to delete the item most recently
+returned by C<each()>, so the following code works properly:
while (($key, $value) = each %hash) {
print $key, "\n";
=for Pod::Functions catch exceptions or compile and run code
-In the first form, the return value of EXPR is parsed and executed as if it
+In the first form, often referred to as a "string eval", the return
+value of EXPR is parsed and executed as if it
were a little Perl program. The value of the expression (which is itself
determined within scalar context) is first parsed, and if there were no
errors, executed as a block within the lexical context of the current Perl
always treats its input as a byte stream and works properly with source
filters, and the L<feature> pragma.
+Problems can arise if the string expands a scalar containing a floating
+point number. That scalar can expand to letters, such as C<"NaN"> or
+C<"Infinity">; or, within the scope of a C<use locale>, the decimal
+point character may be something other than a dot (such as a comma).
+None of these are likely to parse as you are likely expecting.
+
In the second form, the code within the BLOCK is parsed only once--at the
same time the code surrounding the C<eval> itself was parsed--and executed
within the context of the current Perl program. This form is typically
warnings to STDERR, nor does it stuff the text of warning messages into C<$@>.
To do either of those, you have to use the C<$SIG{__WARN__}> facility, or
turn off warnings inside the BLOCK or EXPR using S<C<no warnings 'all'>>.
-See L</warn>, L<perlvar>, L<warnings> and L<perllexwarn>.
+See L</warn>, L<perlvar>, and L<warnings>.
Note that, because C<eval> traps otherwise-fatal errors, it is useful for
determining whether a particular feature (such as C<socket> or C<symlink>)
exec ('foo') or print STDERR "couldn't exec foo: $!";
{ exec ('foo') }; print STDERR "couldn't exec foo: $!";
-If there is more than one argument in LIST, or if LIST is an array
-with more than one value, calls execvp(3) with the arguments in LIST.
-If there is only one scalar argument or an array with one element in it,
-the argument is checked for shell metacharacters, and if there are any,
-the entire argument is passed to the system's command shell for parsing
-(this is C</bin/sh -c> on Unix platforms, but varies on other platforms).
-If there are no shell metacharacters in the argument, it is split into
-words and passed directly to C<execvp>, which is more efficient.
-Examples:
+If there is more than one argument in LIST, this calls execvp(3) with the
+arguments in LIST. If there is only one element in LIST, the argument is
+checked for shell metacharacters, and if there are any, the entire
+argument is passed to the system's command shell for parsing (this is
+C</bin/sh -c> on Unix platforms, but varies on other platforms). If
+there are no shell metacharacters in the argument, it is split into words
+and passed directly to C<execvp>, which is more efficient. Examples:
exec '/bin/echo', 'Your arguments are: ', @ARGV;
exec "sort $outfile | uniq";
If EXPR is omitted, uses C<$_>.
-This function behaves the same way under various pragma, such as in a locale,
-as L</lc> does.
+This function behaves the same way under various pragma, such as within
+S<C<"use feature 'unicode_strings">>, as L</lc> does, with the single
+exception of C<fc> of LATIN CAPITAL LETTER SHARP S (U+1E9E) within the
+scope of S<C<use locale>>. The foldcase of this character would
+normally be C<"ss">, but as explained in the L</lc> section, case
+changes that cross the 255/256 boundary are problematic under locales,
+and are hence prohibited. Therefore, this function under locale returns
+instead the string C<"\x{17F}\x{17F}">, which is the LATIN SMALL LETTER
+LONG S. Since that character itself folds to C<"s">, the string of two
+of them together should be equivalent to a single U+1E9E when foldcased.
While the Unicode Standard defines two additional forms of casefolding,
one for Turkic languages and one that never maps one character into multiple
C<Unicode::Casing> may be used to provide an implementation.
This keyword is available only when the C<"fc"> feature is enabled,
-or when prefixed with C<CORE::>; See L<feature>. Alternately,
+or when prefixed with C<CORE::>; See L<feature>. Alternately,
include a C<use v5.16> or later to the current scope.
=item fcntl FILEHANDLE,FUNCTION,SCALAR
You can use this to find out whether two handles refer to the
same underlying descriptor:
- if (fileno(THIS) == fileno(THAT)) {
+ if (fileno(THIS) != -1 && fileno(THIS) == fileno(THAT)) {
print "THIS and THAT are dups\n";
+ } elsif (fileno(THIS) != -1 && fileno(THAT) != -1) {
+ print "THIS and THAT have different " .
+ "underlying file descriptors\n";
+ } else {
+ print "At least one of THIS and THAT does " .
+ "not have a real file descriptor\n";
}
=item flock FILEHANDLE,OPERATION
The C<POSIX::getattr> function can do this more portably on
systems purporting POSIX compliance. See also the C<Term::ReadKey>
-module from your nearest CPAN site; details on CPAN can be found under
-L<perlmodlib/CPAN>.
+module from your nearest L<CPAN|http://www.cpan.org> site.
=item getlogin
X<getlogin> X<login>
Note for Linux users: Between v5.8.1 and v5.16.0 Perl would work
around non-POSIX thread semantics the minority of Linux systems (and
Debian GNU/kFreeBSD systems) that used LinuxThreads, this emulation
-has since been removed. See the documentation for L<$$|perlvar/$$> for
+has since been removed. See the documentation for L<$$|perlvar/$$> for
details.
Portability issues: L<perlport/getppid>.
system C library. In list context, the return values from the
various get routines are as follows:
- ($name,$passwd,$uid,$gid,
- $quota,$comment,$gcos,$dir,$shell,$expire) = getpw*
- ($name,$passwd,$gid,$members) = getgr*
- ($name,$aliases,$addrtype,$length,@addrs) = gethost*
- ($name,$aliases,$addrtype,$net) = getnet*
- ($name,$aliases,$proto) = getproto*
- ($name,$aliases,$port,$proto) = getserv*
+ # 0 1 2 3 4
+ ( $name, $passwd, $gid, $members ) = getgr*
+ ( $name, $aliases, $addrtype, $net ) = getnet*
+ ( $name, $aliases, $port, $proto ) = getserv*
+ ( $name, $aliases, $proto ) = getproto*
+ ( $name, $aliases, $addrtype, $length, @addrs ) = gethost*
+ ( $name, $passwd, $uid, $gid, $quota,
+ $comment, $gcos, $dir, $shell, $expire ) = getpw*
+ # 5 6 7 8 9
(If the entry doesn't exist you get an empty list.)
=for Pod::Functions create spaghetti code
-The C<goto-LABEL> form finds the statement labeled with LABEL and
+The C<goto LABEL> form finds the statement labeled with LABEL and
resumes execution there. It can't be used to get out of a block or
subroutine given to C<sort>. It can be used to go almost anywhere
else within the dynamic scope, including out of subroutines, but it's
does not offer named loops combined with loop control. Perl does, and
this replaces most structured uses of C<goto> in other languages.)
-The C<goto-EXPR> form expects a label name, whose scope will be resolved
+The C<goto EXPR> form expects to evaluate C<EXPR> to a code reference or
+a label name. If it evaluates to a code reference, it will be handled
+like C<goto &NAME>, below. This is especially useful for implementing
+tail recursion via C<goto __SUB__>.
+
+If the expression evaluates to a label name, its scope will be resolved
dynamically. This allows for computed C<goto>s per FORTRAN, but isn't
necessarily recommended if you're optimizing for maintainability:
goto ("FOO", "BAR", "GLARCH")[$i];
-As shown in this example, C<goto-EXPR> is exempt from the "looks like a
+As shown in this example, C<goto EXPR> is exempt from the "looks like a
function" rule. A pair of parentheses following it does not (necessarily)
delimit its argument. C<goto("NE")."XT"> is equivalent to C<goto NEXT>.
Also, unlike most named operators, this has the same precedence as
assignment.
-Use of C<goto-LABEL> or C<goto-EXPR> to jump into a construct is
+Use of C<goto LABEL> or C<goto EXPR> to jump into a construct is
deprecated and will issue a warning. Even then, it may not be used to
go into any construct that requires initialization, such as a
subroutine or a C<foreach> loop. It also can't be used to go into a
construct that is optimized away.
-The C<goto-&NAME> form is quite different from the other forms of
+The C<goto &NAME> form is quite different from the other forms of
C<goto>. In fact, it isn't a goto in the normal sense at all, and
doesn't have the stigma associated with other gotos. Instead, it
exits the current subroutine (losing any changes set by local()) and
releases prior to 5.12 will produce a syntax error if you try to use an
array argument. In scalar context, returns the number of keys or indices.
-The keys of a hash are returned in an apparently random order. The actual
-random order is subject to change in future versions of Perl, but it
-is guaranteed to be the same order as either the C<values> or C<each>
-function produces (given that the hash has not been modified). Since
-Perl 5.8.1 the ordering can be different even between different runs of
-Perl for security reasons (see L<perlsec/"Algorithmic Complexity
-Attacks">).
+Hash entries are returned in an apparently random order. The actual random
+order is specific to a given hash; the exact same series of operations
+on two hashes may result in a different order for each hash. Any insertion
+into the hash may change the order, as will any deletion, with the exception
+that the most recent key returned by C<each> or C<keys> may be deleted
+without changing the order. So long as a given hash is unmodified you may
+rely on C<keys>, C<values> and C<each> to repeatedly return the same order
+as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for
+details on why hash order is randomized. Aside from the guarantees
+provided here the exact details of Perl's hash algorithm and the hash
+traversal order are subject to change in any release of Perl.
As a side effect, calling keys() resets the internal iterator of the HASH or
ARRAY (see L</each>). In particular, calling keys() in void context resets
=for Pod::Functions send a signal to a process or process group
-Sends a signal to a list of processes. Returns the number of
-processes successfully signaled (which is not necessarily the
-same as the number actually killed).
+Sends a signal to a list of processes. Returns the number of arguments
+that were successfully used to signal (which is not necessarily the same
+as the number of processes actually killed, e.g. where a process group is
+killed).
$cnt = kill 'HUP', $child1, $child2;
kill 'KILL', @goners;
the same signal may have different numbers in different operating systems.
A list of signal names supported by the current platform can be found in
-C<$Config{sig_name}>, which is provided by the C<Config> module. See L<Config>
+C<$Config{sig_name}>, which is provided by the C<Config> module. See L<Config>
for more details.
A negative signal name is the same as a negative signal number, killing process
groups instead of processes. For example, C<kill '-KILL', $pgrp> and
-C<kill -9, $pgrp> will send C<SIGKILL> to the entire process group specified. That
+C<kill -9, $pgrp> will send C<SIGKILL> to
+the entire process group specified. That
means you usually want to use positive not negative signals.
-If SIGNAL is either the number 0 or the string C<ZERO> (or C<SIGZZERO>),
+If SIGNAL is either the number 0 or the string C<ZERO> (or C<SIGZERO>),
no signal is sent to
the process, but C<kill> checks whether it's I<possible> to send a signal to it
(that means, to be brief, that the process is owned by the same user, or we are
See L<perlipc/"Signals"> for more details.
-On some platforms such as Windows where the fork() system call is not available.
-Perl can be built to emulate fork() at the interpreter level.
+On some platforms such as Windows where the fork() system call is not
+available, Perl can be built to emulate fork() at the interpreter level.
This emulation has limitations related to kill that have to be considered,
for code running on Windows and in code intended to be portable.
=item If C<use bytes> is in effect:
-The results follow ASCII semantics. Only characters C<A-Z> change, to C<a-z>
-respectively.
+The results follow ASCII rules. Only the characters C<A-Z> change,
+to C<a-z> respectively.
=item Otherwise, if C<use locale> (but not C<use locale ':not_characters'>) is in effect:
Respects current LC_CTYPE locale for code points < 256; and uses Unicode
-semantics for the remaining code points (this last can only happen if
+rules for the remaining code points (this last can only happen if
the UTF8 flag is also set). See L<perllocale>.
-A deficiency in this is that case changes that cross the 255/256
+Starting in v5.20, Perl wil use full Unicode rules if the locale is
+UTF-8. Otherwise, there is a deficiency in this scheme, which is that
+case changes that cross the 255/256
boundary are not well-defined. For example, the lower case of LATIN CAPITAL
-LETTER SHARP S (U+1E9E) in Unicode semantics is U+00DF (on ASCII
-platforms). But under C<use locale>, the lower case of U+1E9E is
+LETTER SHARP S (U+1E9E) in Unicode rules is U+00DF (on ASCII
+platforms). But under C<use locale> (prior to v5.20 or not a UTF-8
+locale), the lower case of U+1E9E is
itself, because 0xDF may not be LATIN SMALL LETTER SHARP S in the
current locale, and Perl has no way of knowing if that character even
exists in the locale, much less what code point it is. Perl returns
=item Otherwise, If EXPR has the UTF8 flag set:
-Unicode semantics are used for the case change.
+Unicode rules are used for the case change.
-=item Otherwise, if C<use feature 'unicode_strings'> or C<use locale ':not_characters'>) is in effect:
+=item Otherwise, if C<use feature 'unicode_strings'> or C<use locale ':not_characters'> is in effect:
-Unicode semantics are used for the case change.
+Unicode rules are used for the case change.
=item Otherwise:
-ASCII semantics are used for the case change. The lowercase of any character
+ASCII rules are used for the case change. The lowercase of any character
outside the ASCII range is the character itself.
=back
everyone happy.
To recursively create a directory structure, look at
-the C<mkpath> function of the L<File::Path> module.
+the C<make_path> function of the L<File::Path> module.
=item msgctl ID,CMD,ARG
X<msgctl>
Portability issues: L<perlport/msgsnd>.
-=item my EXPR
+=item my VARLIST
X<my>
-=item my TYPE EXPR
+=item my TYPE VARLIST
-=item my EXPR : ATTRS
+=item my VARLIST : ATTRS
-=item my TYPE EXPR : ATTRS
+=item my TYPE VARLIST : ATTRS
=for Pod::Functions declare and assign a local variable (lexical scoping)
A C<my> declares the listed variables to be local (lexically) to the
-enclosing block, file, or C<eval>. If more than one value is listed,
+enclosing block, file, or C<eval>. If more than one variable is listed,
the list must be placed in parentheses.
The exact semantics and interface of TYPE and ATTRS are still
-evolving. TYPE is currently bound to the use of the C<fields> pragma,
+evolving. TYPE may be a bareword, a constant declared
+with C<use constant>, or C<__PACKAGE__>. It is
+currently bound to the use of the C<fields> pragma,
and attributes are handled using the C<attributes> pragma, or starting
from Perl 5.8.0 also via the C<Attribute::Handlers> module. See
L<perlsub/"Private Variables via my()"> for details, and L<fields>,
L<attributes>, and L<Attribute::Handlers>.
+Note that with a parenthesised list, C<undef> can be used as a dummy
+placeholder, for example to skip assignment of initial values:
+
+ my ( undef, $min, $hour ) = localtime;
+
=item next LABEL
X<next> X<continue>
considered a symbolic reference, so C<use strict "refs"> should I<not> be
in effect.)
-If EXPR is omitted, the global (package) scalar variable of the same
-name as the FILEHANDLE contains the filename. (Note that lexical
-variables--those declared with C<my> or C<state>--will not work for this
-purpose; so if you're using C<my> or C<state>, specify EXPR in your
-call to open.)
-
If three (or more) arguments are specified, the open mode (including
optional encoding) in the second argument are distinct from the filename in
the third. If MODE is C<< < >> or nothing, the file is opened for input.
modules that can help with that problem)) always check
the return value from opening a file.
+The filehandle will be closed when its reference count reaches zero.
+If it is a lexically scoped variable declared with C<my>, that usually
+means the end of the enclosing scope. However, this automatic close
+does not check for errors, so it is better to explicitly close
+filehandles, especially those used for writing:
+
+ close($handle)
+ || warn "close failed: $!";
+
+An older style is to use a bareword as the filehandle, as
+
+ open(FH, "<", "input.txt")
+ or die "cannot open < input.txt: $!";
+
+Then you can use C<FH> as the filehandle, in C<< close FH >> and C<<
+<FH> >> and so on. Note that it's a global variable, so this form is
+not recommended in new code.
+
+As a shortcut a one-argument call takes the filename from the global
+scalar variable of the same name as the filehandle:
+
+ $ARTICLE = 100;
+ open(ARTICLE) or die "Can't find article $ARTICLE: $!\n";
+
+Here C<$ARTICLE> must be a global (package) scalar variable - not one
+declared with C<my> or C<state>.
+
As a special case the three-argument form with a read/write mode and the third
argument being C<undef>:
General examples:
- $ARTICLE = 100;
- open(ARTICLE) or die "Can't find article $ARTICLE: $!\n";
- while (<ARTICLE>) {...
-
open(LOG, ">>/usr/spool/news/twitlog"); # (log is reserved)
# if the open fails, output is discarded
seek(HANDLE, 0, 0);
print "File contains: ", <HANDLE>;
-Using the constructor from the C<IO::Handle> package (or one of its
-subclasses, such as C<IO::File> or C<IO::Socket>), you can generate anonymous
-filehandles that have the scope of the variables used to hold them, then
-automatically (but silently) close once their reference counts become
-zero, typically at scope exit:
-
- use IO::File;
- #...
- sub read_myfile_munged {
- my $ALL = shift;
- # or just leave it undef to autoviv
- my $handle = IO::File->new;
- open($handle, "<", "myfile") or die "myfile: $!";
- $first = <$handle>
- or return (); # Automatically closed here.
- mung($first) or die "mung failed"; # Or here.
- return (first, <$handle>) if $ALL; # Or here.
- return $first; # Or here.
- }
-
-B<WARNING:> The previous example has a bug because the automatic
-close that happens when the refcount on C<handle> reaches zero does not
-properly detect and report failures. I<Always> close the handle
-yourself and inspect the return value.
-
- close($handle)
- || warn "close failed: $!";
-
See L</seek> for some details about mixing reading and writing.
Portability issues: L<perlport/open>.
For the reverse, see L</chr>.
See L<perlunicode> for more about Unicode.
-=item our EXPR
+=item our VARLIST
X<our> X<global>
-=item our TYPE EXPR
+=item our TYPE VARLIST
-=item our EXPR : ATTRS
+=item our VARLIST : ATTRS
-=item our TYPE EXPR : ATTRS
+=item our TYPE VARLIST : ATTRS
=for Pod::Functions +5.6.0 declare and assign a package variable (lexical scoping)
C<use vars>, which allows use of an unqualified name I<only> within the
affected package, but across scopes.
-If more than one value is listed, the list must be placed
+If more than one variable is listed, the list must be placed
in parentheses.
our $foo;
L<perlsub/"Private Variables via my()"> for details, and L<fields>,
L<attributes>, and L<Attribute::Handlers>.
+Note that with a parenthesised list, C<undef> can be used as a dummy
+placeholder, for example to skip assignment of initial values:
+
+ our ( undef, $min, $hour ) = localtime;
+
=item pack TEMPLATE,LIST
X<pack>
! sSlLiI Forces native (short, long, int) sizes instead
of fixed (16-/32-bit) sizes.
- xX Make x and X act as alignment commands.
+ ! xX Make x and X act as alignment commands.
- nNvV Treat integers as signed instead of unsigned.
+ ! nNvV Treat integers as signed instead of unsigned.
- @. Specify position as byte offset in the internal
+ ! @. Specify position as byte offset in the internal
representation of the packed string. Efficient
but dangerous.
=begin comment
Larry recalls that the hex and bit string formats (H, h, B, b) were added to
-pack for processing data from NASA's Magellan probe. Magellan was in an
+pack for processing data from NASA's Magellan probe. Magellan was in an
elliptical orbit, using the antenna for the radar mapping when close to
Venus and for communicating data back to Earth for the rest of the orbit.
There were two transmission units, but one of these failed, and then the
considered to be word characters.
Otherwise, Perl quotes non-ASCII characters using an adaptation from
-Unicode (see L<http://www.unicode.org/reports/tr31/>.)
+Unicode (see L<http://www.unicode.org/reports/tr31/>).
The only code points that are quoted are those that have any of the
Unicode properties: Pattern_Syntax, Pattern_White_Space, White_Space,
Default_Ignorable_Code_Point, or General_Category=Control.
=for Pod::Functions find out the type of thing being referenced
Returns a non-empty string if EXPR is a reference, the empty
-string otherwise. If EXPR
-is not specified, C<$_> will be used. The value returned depends on the
-type of thing the reference is a reference to.
+string otherwise. If EXPR is not specified, C<$_> will be used. The
+value returned depends on the type of thing the reference is a reference to.
+
Builtin types include:
SCALAR
VSTRING
Regexp
-If the referenced object has been blessed into a package, then that package
-name is returned instead. You can think of C<ref> as a C<typeof> operator.
+You can think of C<ref> as a C<typeof> operator.
if (ref($r) eq "HASH") {
print "r is a reference to a hash.\n";
The result C<Regexp> indicates that the argument is a regular expression
resulting from C<qr//>.
+If the referenced object has been blessed into a package, then that package
+name is returned instead. But don't use that, as it's now considered
+"bad practice". For one reason, an object could be using a class called
+C<Regexp> or C<IO>, or even C<HASH>. Also, C<ref> doesn't take into account
+subclasses, like C<isa> does.
+
+Instead, use C<blessed> (in the L<Scalar::Util> module) for boolean
+checks, C<isa> for specific class checks and C<reftype> (also from
+L<Scalar::Util>) for type checks. (See L<perlobj> for details and a
+C<blessed/isa> example.)
+
See also L<perlref>.
=item rename OLDNAME,NEWNAME
hasn't already been included. The file is included via the do-FILE
mechanism, which is essentially just a variety of C<eval> with the
caveat that lexical variables in the invoking script will be invisible
-to the included code. Has semantics similar to the following subroutine:
+to the included code. If it were implemented in pure Perl, it
+would have semantics similar to the following:
+
+ use Carp 'croak';
+ use version;
sub require {
- my ($filename) = @_;
- if (exists $INC{$filename}) {
- return 1 if $INC{$filename};
- die "Compilation failed in require";
- }
- my ($realfilename,$result);
- ITER: {
- foreach $prefix (@INC) {
- $realfilename = "$prefix/$filename";
- if (-f $realfilename) {
- $INC{$filename} = $realfilename;
- $result = do $realfilename;
- last ITER;
- }
- }
- die "Can't find $filename in \@INC";
- }
- if ($@) {
- $INC{$filename} = undef;
- die $@;
- } elsif (!$result) {
- delete $INC{$filename};
- die "$filename did not return true value";
- } else {
- return $result;
- }
+ my ($filename) = @_;
+ if ( my $version = eval { version->parse($filename) } ) {
+ if ( $version > $^V ) {
+ my $vn = $version->normal;
+ croak "Perl $vn required--this is only $^V, stopped";
+ }
+ return 1;
+ }
+
+ if (exists $INC{$filename}) {
+ return 1 if $INC{$filename};
+ croak "Compilation failed in require";
+ }
+
+ foreach $prefix (@INC) {
+ if (ref($prefix)) {
+ #... do other stuff - see text below ....
+ }
+ # (see text below about possible appending of .pmc
+ # suffix to $filename)
+ my $realfilename = "$prefix/$filename";
+ next if ! -e $realfilename || -d _ || -b _;
+ $INC{$filename} = $realfilename;
+ my $result = do($realfilename);
+ # but run in caller's namespace
+
+ if (!defined $result) {
+ $INC{$filename} = undef;
+ croak $@ ? "$@Compilation failed in require"
+ : "Can't locate $filename: $!\n";
+ }
+ if (!$result) {
+ delete $INC{$filename};
+ croak "$filename did not return true value";
+ }
+ $! = 0;
+ return $result;
+ }
+ croak "Can't locate $filename in \@INC ...";
}
Note that the file will not be included twice under the same specified
walks through @INC and encounters a subroutine, this subroutine gets
called with two parameters, the first a reference to itself, and the
second the name of the file to be included (e.g., "F<Foo/Bar.pm>"). The
-subroutine should return either nothing or else a list of up to three
+subroutine should return either nothing or else a list of up to four
values in the following order:
=over
=item 1
-A filehandle, from which the file will be read.
+A reference to a scalar, containing any initial source code to prepend to
+the file or generator output.
=item 2
+A filehandle, from which the file will be read.
+
+=item 3
+
A reference to a subroutine. If there is no filehandle (previous item),
then this subroutine is expected to generate one line of source code per
call, writing the line into C<$_> and returning 1, then finally at end of
Again, return 1 for each valid line, and 0 after all lines have been
returned.
-=item 3
+=item 4
Optional state for the subroutine. The state is passed in as C<$_[1]>. A
reference to the subroutine itself is passed in as C<$_[0]>.
If LENGTH is negative, removes the elements from OFFSET onward
except for -LENGTH elements at the end of the array.
If both OFFSET and LENGTH are omitted, removes everything. If OFFSET is
-past the end of the array, Perl issues a warning, and splices at the
-end of the array.
+past the end of the array and a LENGTH was provided, Perl issues a warning,
+and splices at the end of the array.
The following equivalences hold (assuming C<< $#a >= $i >> )
unshift(@a,$x,$y) splice(@a,0,0,$x,$y)
$a[$i] = $y splice(@a,$i,1,$y)
-Example, assuming array lengths are passed before arrays:
+C<splice> can be used, for example, to implement n-ary queue processing:
- sub aeq { # compare two list values
- my(@a) = splice(@_,0,shift);
- my(@b) = splice(@_,0,shift);
- return 0 unless @a == @b; # same len?
- while (@a) {
- return 0 if pop(@a) ne pop(@b);
- }
- return 1;
+ sub nary_print {
+ my $n = shift;
+ while (my @next_n = splice @_, 0, $n) {
+ say join q{ -- }, @next_n;
+ }
}
- if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... }
+
+ nary_print(3, qw(a b c d e f g h));
+ # prints:
+ # a -- b -- c
+ # d -- e -- f
+ # g -- h
Starting with Perl 5.14, C<splice> can take scalar EXPR, which must hold a
reference to an unblessed array. The argument will be dereferenced
I<any> contiguous whitespace (not just a single space character) is used as
a separator. However, this special treatment can be avoided by specifying
the pattern S<C</ />> instead of the string S<C<" ">>, thereby allowing
-only a single space character to be a separator.
+only a single space character to be a separator. In earlier Perls this
+special case was restricted to the use of a plain S<C<" ">> as the
+pattern argument to split, in Perl 5.18.0 and later this special case is
+triggered by any expression which evaluates as the simple string S<C<" ">>.
If omitted, PATTERN defaults to a single space, S<C<" ">>, triggering
the previously described I<awk> emulation.
Portability issues: L<perlport/stat>.
-=item state EXPR
+=item state VARLIST
X<state>
-=item state TYPE EXPR
+=item state TYPE VARLIST
-=item state EXPR : ATTRS
+=item state VARLIST : ATTRS
-=item state TYPE EXPR : ATTRS
+=item state TYPE VARLIST : ATTRS
=for Pod::Functions +state declare and assign a persistent lexical variable
is entered.
See L<perlsub/"Persistent Private Variables"> for details.
+If more than one variable is listed, the list must be placed in
+parentheses. With a parenthesised list, C<undef> can be used as a
+dummy placeholder. However, since initialization of state variables in
+list context is currently not possible this would serve no purpose.
+
C<state> variables are enabled only when the C<use feature "state"> pragma
is in effect, unless the keyword is written as C<CORE::state>.
See also L<feature>.
=for Pod::Functions +current_sub the current subroutine, or C<undef> if not in a subroutine
-A special token that returns the a reference to the current subroutine, or
+A special token that returns a reference to the current subroutine, or
C<undef> outside of a subroutine.
+The behaviour of C<__SUB__> within a regex code block (such as C</(?{...})/>)
+is subject to change.
+
This token is only available under C<use v5.16> or the "current_sub"
feature. See L<feature>.
Note that C<sysopen> depends on the fdopen() C library function.
On many Unix systems, fdopen() is known to fail when file descriptors
exceed a certain value, typically 255. If you need more file
-descriptors than that, consider rebuilding Perl to use the C<sfio>
-library, or perhaps using the POSIX::open() function.
+descriptors than that, consider using the POSIX::open() function.
See L<perlopentut> for a kinder, gentler explanation of opening files.
This function binds a variable to a package class that will provide the
implementation for the variable. VARIABLE is the name of the variable
to be enchanted. CLASSNAME is the name of a class implementing objects
-of correct type. Any additional arguments are passed to the C<new>
+of correct type. Any additional arguments are passed to the
+appropriate constructor
method of the class (meaning C<TIESCALAR>, C<TIEHANDLE>, C<TIEARRAY>,
or C<TIEHASH>). Typically these are arguments such as might be passed
-to the C<dbm_open()> function of C. The object returned by the C<new>
-method is also returned by the C<tie> function, which would be useful
+to the C<dbm_open()> function of C. The object returned by the
+constructor is also returned by the C<tie> function, which would be useful
if you want to access other methods in CLASSNAME.
Note that functions such as C<keys> and C<values> may return huge lists
=for Pod::Functions transliterate a string
The transliteration operator. Same as C<y///>. See
-L<perlop/"Quote and Quote-like Operators">.
+L<perlop/"Quote-Like Operators">.
=item truncate FILEHANDLE,LENGTH
X<truncate>
an array; prior to that release, attempting to use an array argument will
produce a syntax error. In scalar context, returns the number of values.
-When called on a hash, the values are returned in an apparently random
-order. The actual random order is subject to change in future versions of
-Perl, but it is guaranteed to be the same order as either the C<keys> or
-C<each> function would produce on the same (unmodified) hash. Since Perl
-5.8.1 the ordering is different even between different runs of Perl for
-security reasons (see L<perlsec/"Algorithmic Complexity Attacks">).
+Hash entries are returned in an apparently random order. The actual random
+order is specific to a given hash; the exact same series of operations
+on two hashes may result in a different order for each hash. Any insertion
+into the hash may change the order, as will any deletion, with the exception
+that the most recent key returned by C<each> or C<keys> may be deleted
+without changing the order. So long as a given hash is unmodified you may
+rely on C<keys>, C<values> and C<each> to repeatedly return the same order
+as each other. See L<perlsec/"Algorithmic Complexity Attacks"> for
+details on why hash order is randomized. Aside from the guarantees
+provided here the exact details of Perl's hash algorithm and the hash
+traversal order are subject to change in any release of Perl.
As a side effect, calling values() resets the HASH or ARRAY's internal
iterator, see L</each>. (In particular, calling values() in void context
Top of form processing is handled automatically: if there is insufficient
room on the current page for the formatted record, the page is advanced by
-writing a form feed, a special top-of-page format is used to format the new
+writing a form feed and a special top-of-page
+format is used to format the new
page header before the record is written. By default, the top-of-page
-format is the name of the filehandle with "_TOP" appended. This would be a
+format is the name of the filehandle with "_TOP" appended, or "top"
+in the current package if the former does not exist. This would be a
problem with autovivified filehandles, but it may be dynamically set to the
format of your choice by assigning the name to the C<$^> variable while
that filehandle is selected. The number of lines remaining on the current
=for Pod::Functions transliterate a string
The transliteration operator. Same as C<tr///>. See
-L<perlop/"Quote and Quote-like Operators">.
+L<perlop/"Quote-Like Operators">.
=back
=item gt
-=item if
-
=item le
=item lt
=item foreach
+=item if
+
=item unless
=item until
=item when
These flow-control keywords related to the experimental switch feature are
-documented in L<perlsyn/"Switch Statements"> .
+documented in L<perlsyn/"Switch Statements">.
=back
https://perl5.git.perl.org / perl5.git / blobdiff