=head1 SYNOPSIS
-B<perl> S<[ B<-sTuUWX> ]>
+B<perl> S<[ B<-CsTuUWX> ]>
S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]>
S<[ B<-cw> ] [ B<-d>[:I<debugger>] ] [ B<-D>[I<number/list>] ]>
S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal>] ]>
=item Win95/NT
-The Win95/NT installation, when using the Activeware port of Perl,
+The Win95/NT installation, when using the ActiveState installer for Perl,
will modify the Registry to associate the F<.pl> extension with the perl
-interpreter. If you install another port of Perl, including the one
-in the Win32 directory of the Perl distribution, then you'll have to
-modify the Registry yourself. Note that this means you can no
-longer tell the difference between an executable Perl program
-and a Perl library file.
+interpreter. If you install Perl by other means (including building from
+the sources), you may have to modify the Registry yourself. Note that
+this means you can no longer tell the difference between an executable
+Perl program and a Perl library file.
=item Macintosh
An alternate delimiter may be specified using B<-F>.
+=item B<-C>
+
+enables Perl to use the native wide character APIs on the target system.
+The magic variable C<${^WIDE_SYSTEM_CALLS}> reflects the state of
+this switch. See L<perlvar/"${^WIDE_SYSTEM_CALLS}">.
+
+This feature is currently only implemented on the Win32 platform.
+
=item B<-c>
causes Perl to check the syntax of the program and then exit without
-executing it. Actually, it I<will> execute C<BEGIN>, C<STOP>, and
+executing it. Actually, it I<will> execute C<BEGIN>, C<CHECK>, and
C<use> blocks, because these are considered as occurring outside the
execution of your program. C<INIT> and C<END> blocks, however, will
be skipped.
runs the program under the Perl debugger. See L<perldebug>.
-=item B<-d:>I<foo>
+=item B<-d:>I<foo[=bar,baz]>
runs the program under the control of a debugging, profiling, or
tracing module installed as Devel::foo. E.g., B<-d:DProf> executes
-the program using the Devel::DProf profiler. See L<perldebug>.
+the program using the Devel::DProf profiler. As with the B<-M>
+flag, options may be passed to the Devel::foo package where they
+will be received and interpreted by the Devel::foo::import routine.
+The comma-separated list of options must follow a C<=> character.
+See L<perldebug>.
=item B<-D>I<letters>
8 t Trace execution
16 o Method and overloading resolution
32 c String/numeric conversions
- 64 P Print preprocessor command for -P
+ 64 P Print preprocessor command for -P, source file input state
128 m Memory allocation
256 f Format processing
512 r Regular expression parsing and execution
16384 X Scratchpad allocation
32768 D Cleaning up
65536 S Thread synchronization
+ 131072 T Tokenising
+ 262144 R Include reference counts of dumped variables (eg when using -Ds)
All these flags require B<-DDEBUGGING> when you compile the Perl
executable. See the F<INSTALL> file in the Perl source distribution
with the next one (if it exists).
For a discussion of issues surrounding file permissions and B<-i>,
-see L<perlfaq5/Why does Perl let me delete read-only files? Why
-does -i clobber protected files? Isn't this a bug in Perl?>.
+see L<perlfaq5/Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl?>.
You cannot use B<-i> to create directories or to strip extensions from
files.
=item B<-P>
-causes your program to be run through the C preprocessor before
-compilation by Perl. (Because both comments and B<cpp> directives begin
+B<NOTE: Use of -P is strongly discouraged because of its inherent
+problems, including poor portability.>
+
+This option causes your program to be run through the C preprocessor before
+compilation by Perl. Because both comments and B<cpp> directives begin
with the # character, you should avoid starting comments with any words
-recognized by the C preprocessor such as "if", "else", or "define".)
+recognized by the C preprocessor such as C<"if">, C<"else">, or C<"define">.
+
+If you're considering using C<-P>, you might also want to look at the
+Filter::cpp module from CPAN.
+
+The problems of -P include, but are not limited to:
+
+=over 10
+
+=item *
+
+The C<#!> line is stripped, so any switches there don't apply.
+
+=item *
+
+A C<-P> on a C<#!> line doesn't work.
+
+=item *
+
+B<All> lines that begin with (whitespace and) a C<#> but
+do not look like cpp commands, are stripped, including anything
+inside Perl strings, regular expressions, and here-docs .
+
+=item *
+
+In some platforms the C preprocessor knows too much: it knows about
+the C++ -style until-end-of-line comments starting with C<"//">.
+This will cause problems with common Perl constructs like
+
+ s/foo//;
+
+because after -P this will became illegal code
+
+ s/foo
+
+The workaround is to use some other quoting separator than C<"/">,
+like for example C<"!">:
+
+ s!foo!!;
+
+
+
+=item *
+
+It requires not only a working C preprocessor but also a working
+F<sed>. If not on UNIX, you are probably out of luck on this.
+
+=item *
+
+Script line numbers are not preserved.
+
+=item *
+
+The C<-x> does not work with C<-P>.
+
+=back
=item B<-s>
enables rudimentary switch parsing for switches on the command
line after the program name but before any filename arguments (or before
-a B<-->). Any switch found there is removed from @ARGV and sets the
+an argument of B<-->). This means you can have switches with two leading
+dashes (B<--help>). Any switch found there is removed from @ARGV and sets the
corresponding variable in the Perl program. The following program
-prints "true" if and only if the program is invoked with a B<-xyz> switch.
+prints "1" if the program is invoked with a B<-xyz> switch, and "abc"
+if it is invoked with B<-xyz=abc>.
#!/usr/bin/perl -s
- if ($xyz) { print "true\n" }
+ if ($xyz) { print "$xyz\n" }
+
+Do note that B<--help> creates the variable ${-help}, which is not compliant
+with C<strict refs>.
=item B<-S>
C<__WARN__> hooks, as described in L<perlvar> and L<perlfunc/warn>.
See also L<perldiag> and L<perltrap>. A new, fine-grained warning
facility is also available if you want to manipulate entire classes
-of warnings; see L<warnings> (or better yet, its source code) about
-that.
+of warnings; see L<warnings> or L<perllexwarn>.
=item B<-W>
-Enables all warnings regardless of
+Enables all warnings regardless of C<no warnings> or C<$^W>.
See L<perllexwarn>.
=item B<-X>
-Disables all warnings regardless of
+Disables all warnings regardless of C<use warnings> or C<$^W>.
See L<perllexwarn>.
=item B<-x> I<directory>
Relevant only if your perl executable was built with B<-DDEBUGGING>,
this controls the behavior of global destruction of objects and other
-references.
+references. See L<perlhack/PERL_DESTRUCT_LEVEL> for more information.
+
+=item PERL_ENCODING
+
+If using the C<encoding> pragma without an explicit encoding name, the
+PERL_ENCODING environment variable is consulted for an encoding name.
+
+=item PERL_ROOT (specific to the VMS port)
+
+A translation concealed rooted logical name that contains perl and the
+logical device for the @INC path on VMS only. Other logical names that
+affect perl on VMS include PERLSHR, PERL_ENV_TABLES, and
+SYS$TIMEZONE_DIFFERENTIAL but are optional and discussed further in
+L<perlvms> and in F<README.vms> in the Perl source distribution.
+
+=item SYS$LOGIN (specific to the VMS port)
+
+Used if chdir has no argument and HOME and LOGDIR are not set.
=back
https://perl5.git.perl.org / perl5.git / blobdiff