/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
- * available to covert a multibyte string into a wide character string.
+ * available to convert a multibyte string into a wide character string.
*/
/*#define HAS_MBSTOWCS / **/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
- * to covert a multibyte to a wide character.
+ * to convert a multibyte to a wide character.
*/
/*#define HAS_MBTOWC / **/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
- * to covert a wide character to a multibyte.
+ * to convert a wide character to a multibyte.
*/
/*#define HAS_WCTOMB / **/
#define OSNAME "unknown" /**/
#define OSVERS "unknown" /**/
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
-
/* MULTIARCH:
* This symbol, if defined, signifies that the build
* process will produce some binary files that are going to be
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define ARCHLIB "/usr/local/lib/perl5/5.19/unknown" / **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.19/unknown" / **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.21/unknown" / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.21/unknown" / **/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
* If the compiler supports cross-compiling or multiple-architecture
- * binaries (e.g. on NeXT systems), use compiler-defined macros to
+ * binaries, use compiler-defined macros to
* determine the byte order.
- * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
- * Binaries (MAB) on either big endian or little endian machines.
- * The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
- * one system, and used by a different architecture to build an
- * extension. Older versions of NeXT that might not have
- * defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
- * This might matter for NeXT 3.0.
*/
#if defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# endif
# endif
# endif
-# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
-# define BYTEORDER 0x4321
-# endif
#else
#define BYTEORDER 0x1234 /* large digits for MSB */
-#endif /* NeXT */
+#endif
/* CHARBITS:
* This symbol contains the size of a char, so that the C preprocessor
/*#define HASATTRIBUTE_UNUSED / **/
/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
+/* HAS_BACKTRACE:
+ * This symbol, if defined, indicates that the backtrace() routine is
+ * available to get a stack trace. The <execinfo.h> header must be
+ * included to use this routine.
+ */
+/*#define HAS_BACKTRACE / **/
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
/*#define HAS_CTIME_R / **/
#define CTIME_R_PROTO 0 /**/
+/* HAS_DLADDR:
+ * This symbol, if defined, indicates that the dladdr() routine is
+ * available to query dynamic linker information for an address.
+ * The <dlfcn.h> header must be included to use this routine.
+ */
+/*#define HAS_DLADDR / **/
+
/* SETUID_SCRIPTS_ARE_SECURE_NOW:
* This symbol, if defined, indicates that the bug that prevents
* setuid scripts from being secure is not present in this kernel.
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long doubles.
*/
+/* LONG_DOUBLEKIND:
+ * LONG_DOUBLEKIND will be one of
+ * LONG_DOUBLE_IS_DOUBLE
+ * LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
+ * LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
+ * LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN
+ * LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN
+ * LONG_DOUBLE_IS_UNKNOWN_FORMAT
+ * It is only defined if the system supports long doubles.
+ */
/*#define HAS_LONG_DOUBLE / **/
#ifdef HAS_LONG_DOUBLE
#define LONG_DOUBLESIZE 8 /**/
+#define LONG_DOUBLEKIND 0 /**/
+#define LONG_DOUBLE_IS_DOUBLE 0
+#define LONG_DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN 1
+#define LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN 2
+#define LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN 3
+#define LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN 4
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN 5
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN 6
+#define LONG_DOUBLE_IS_UNKNOWN_FORMAT -1
#endif
/* HAS_LONG_LONG:
* This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
-/* BOOTSTRAP_CHARSET:
- * This symbol, if defined, indicates that this system needs
- * converting various files to the native character set before
- * bringing up perl on a system that has a non-ASCII character
- * set and no working perl.
- */
/*#define EBCDIC / **/
-/*#define BOOTSTRAP_CHARSET / **/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
/*#define DIRNAMLEN / **/
#define Direntry_t struct dirent
+/* I_EXECINFO:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <execinfo.h> for backtrace() support.
+ */
+/*#define I_EXECINFO / **/
+
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* include <grp.h>.
*/
/*#define I_SYSUIO / **/
+/* I_TERMIO:
+ * This symbol, if defined, indicates that the program should include
+ * <termio.h> rather than <sgtty.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+/* I_TERMIOS:
+ * This symbol, if defined, indicates that the program should include
+ * the POSIX termios.h rather than sgtty.h or termio.h.
+ * There are also differences in the ioctl() calls that depend on the
+ * value of this symbol.
+ */
+/* I_SGTTY:
+ * This symbol, if defined, indicates that the program should include
+ * <sgtty.h> rather than <termio.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+/*#define I_TERMIO / **/
+/*#define I_TERMIOS / **/
+/*#define I_SGTTY / **/
+
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* include <time.h>.
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/usr/local/lib/perl5/5.19" /**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.19" /**/
+#define PRIVLIB "/usr/local/lib/perl5/5.21" /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.21" /**/
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define SITEARCH "/usr/local/lib/perl5/5.19/unknown" / **/
-/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.19/unknown" / **/
+/*#define SITEARCH "/usr/local/lib/perl5/5.21/unknown" / **/
+/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.21/unknown" / **/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "/usr/local/lib/perl5/5.19" /**/
-#define SITELIB_EXP "/usr/local/lib/perl5/5.19" /**/
+#define SITELIB "/usr/local/lib/perl5/5.21" /**/
+#define SITELIB_EXP "/usr/local/lib/perl5/5.21" /**/
#define SITELIB_STEM "/usr/local/lib/perl5" /**/
/* Size_t_size:
/*#define PERL_VENDORLIB_EXP "" / **/
/*#define PERL_VENDORLIB_STEM "" / **/
-/* I_TERMIO:
- * This symbol, if defined, indicates that the program should include
- * <termio.h> rather than <sgtty.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- * This symbol, if defined, indicates that the program should include
- * the POSIX termios.h rather than sgtty.h or termio.h.
- * There are also differences in the ioctl() calls that depend on the
- * value of this symbol.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-/* I_SGTTY:
- * This symbol, if defined, indicates that the program should include
- * <sgtty.h> rather than <termio.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
*/
-/*#define I_TERMIO / **/
-/*#define I_TERMIOS / **/
-/*#define I_SGTTY / **/
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
/* PERL_USE_DEVEL:
* This symbol, if defined, indicates that Perl was configured with
*/
/*#define HAS_FREXPL / **/
+/* HAS_LDEXPL:
+ * This symbol, if defined, indicates that the ldexpl routine is
+ * available to shift a long double floating-point number
+ * by an integral power of 2.
+ */
+/*#define HAS_LDEXPL / **/
+
/* HAS_STRUCT_FS_DATA:
* This symbol, if defined, indicates that the struct fs_data
* to do statfs() is supported.
*/
/*#define HAS_PTHREAD_ATTR_SETSCOPE / **/
+/* HAS_PTRDIFF_T:
+ * This symbol will be defined if the C compiler supports ptrdiff_t.
+ */
+#define HAS_PTRDIFF_T /**/
+
/* HAS_READV:
* This symbol, if defined, indicates that the readv routine is
* available to do gather reads. You will also need <sys/uio.h>
*/
/*#define HAS_USTAT / **/
+/* HAS_WCSCMP:
+ * This symbol, if defined, indicates that the wcscmp routine is
+ * available to compare two wide character strings.
+ */
+/*#define HAS_WCSCMP / **/
+
+/* HAS_WCSXFRM:
+ * This symbol, if defined, indicates that the wcsxfrm routine is
+ * available to tranform a wide character string for wcscmp().
+ */
+/*#define HAS_WCSXFRM / **/
+
/* HAS_WRITEV:
* This symbol, if defined, indicates that the writev routine is
* available to do scatter writes.
*/
#define I_ASSERT /**/
+/* I_BFD:
+ * This symbol, if defined, indicates that <bfd.h> exists and
+ * can be included.
+ */
+/*#define I_BFD / **/
+
/* I_CRYPT:
* This symbol, if defined, indicates that <crypt.h> exists and
* should be included.
/*#define PERL_PRIeldbl "lle" / **/
/*#define PERL_SCNfldbl "llf" / **/
-/* PERL_MAD:
- * This symbol, if defined, indicates that the Misc Attribution
- * Declaration code should be conditionally compiled.
- */
-/*#define PERL_MAD / **/
-
/* NEED_VA_COPY:
* This symbol, if defined, indicates that the system stores
* the variable argument list datatype, va_list, in a format
/*#define USE_64_BIT_ALL / **/
#endif
+/* USE_CBACKTRACE:
+ * This symbol, if defined, indicates that Perl should
+ * be built with support for backtrace.
+ */
+/*#define USE_CBACKTRACE / **/
+
/* USE_DTRACE:
* This symbol, if defined, indicates that Perl should
* be built with support for DTrace.
#endif
/* Generated from:
- * cdad09dc550db3784fa27db0f3cc6e1c1644e496c430e464d143bc725c327a53 config_h.SH
- * ac5e1b20c67628ee909f09737452ab1878a99053c728e3e7746c23c7b8a0d037 uconfig.sh
+ * 5f68e17a9d9e989b824daf55d2adcad3b7af2becfa8f627c6cb1d0e376f7e1a5 config_h.SH
+ * 98397a7d818a024628d6b34e5903a8f408da96601a2a19471c480511f3c8d914 uconfig.sh
* ex: set ro: */