$! OpenVMS configuration procedure for Perl -- do not attempt to run under DOS
$ sav_ver = 'F$VERIFY(0)'
+$ on control_y then goto clean_up
$! SET VERIFY
$!
$! For example, if you unpacked perl into: [USER.PERL-5n...] then you will
$ cat = "type"
$ delete := delete ! local symbol overrides globals with qualifiers
$ gcc_symbol = "gcc"
-$ ld = "Link"
+$ ld = "Link/nodebug"
$ ans = ""
$ macros = ""
$ extra_flags = ""
$ user_c_flags = ""
$ use_ieee_math = "y"
$ be_case_sensitive = "n"
+$ unlink_all_versions = "n"
+$ builder = "MMK"
$ use_vmsdebug_perl = "n"
$ use64bitall = "n"
$ use64bitint = "n"
+$ uselargefiles = "n"
+$ usesitecustomize = "n"
$ C_Compiler_Replace = "CC="
$ Thread_Live_Dangerously = "MT="
$ use_two_pot_malloc = "N"
$ use_debugmalloc = "N"
$ ccflags = ""
$ static_ext = ""
+$ nonxs_ext = ""
$ vms_default_directory_name = F$ENVIRONMENT("DEFAULT")
$ max_allowed_dir_depth = 3 ! e.g. [A.B.PERLxxx] not [A.B.C.PERLxxx]
$! max_allowed_dir_depth = 2 ! e.g. [A.PERLxxx] not [A.B.PERLxxx]
$ THEN
$ CREATE/DIRECTORY [.UU]
$ ELSE
-$ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG [.UU]*.*;*
+$ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM [.UU]*.*;*
$ ENDIF
$!: Configure runs within the UU subdirectory
$ SET DEFAULT [.UU]
$!
$ dirname = F$EXTRACT(0,F$LOCATE("]",file_2_find),file_2_find) + "]"
$ file_2_find = file_2_find - dirname
+$!
+$! may not need double dot check on ODS-5 volumes
+$ found = F$SEARCH(dirname + file_2_find)
+$ IF found .NES. "" THEN GOTO Read_loop_manifest
+$!
$ dots = 0
$Dot_loop:
$ dot_ele = F$ELEMENT(dots,".",file_2_find)
$ ENDIF
$ ELSE
$ echo4 "Looks good..."
-$ DELETE/NOLOG MISSING.;
+$ DELETE/NOLOG/NOCONFIRM MISSING.;
$ ENDIF ! (miss_list .NES. "")
$ ENDIF ! (manifestfound .EQS. "") ELSE
$!
$myread:
$ ans = ""
$ len_rp = F$LENGTH(rp)
-$ If (fastread)
-$ Then
-$ IF len_rp .GT. 210
-$ THEN
-$ i_rp = 0
-$ fastread_rp_loop:
-$ sub_rp = F$EXTRACT(i_rp,COLUMNS,rp)
-$ echo4 "''sub_rp'"
-$ i_rp = i_rp + COLUMNS
-$ IF i_rp .LT. len_rp THEN GOTO fastread_rp_loop
-$ ELSE
-$ echo4 "''rp'"
-$ ENDIF
-$ Else
$ If (.NOT. silent) Then echo ""
$ IF len_rp .GT. 210
$ THEN
$ i_rp = 0
-$ firstread_rp_loop:
+$ rp_loop:
$ sub_rp = F$EXTRACT(i_rp,COLUMNS,rp)
$ i_rp = i_rp + COLUMNS
$ if i_rp .LT. len_rp THEN echo4 "''sub_rp'"
-$ IF i_rp .LT. len_rp THEN GOTO firstread_rp_loop
-$ READ SYS$COMMAND/PROMPT="''sub_rp'" ans
+$ IF i_rp .LT. len_rp THEN GOTO rp_loop
$ ELSE
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
+$ sub_rp = rp
$ ENDIF
+$ if (fastread)
+$ then
+$ echo4 "''sub_rp'"
+$ else
+$ READ SYS$COMMAND/PROMPT="''sub_rp'" ans
+$ endif
$ IF (ans .EQS. "&-d")
$ THEN
$ echo4 "(OK, I will run with -d after this question.)"
-$ IF (.NOT. silent) THEN echo ""
-$ IF len_rp .GT. 210
-$ THEN
-$ i_rp = 0
-$ secondread_rp_loop:
-$ sub_rp = F$EXTRACT(i_rp,COLUMNS,rp)
-$ echo4 "''sub_rp'"
-$ i_rp = i_rp + COLUMNS
-$ IF i_rp .LT. len_rp THEN GOTO secondread_rp_loop
-$ READ SYS$COMMAND/PROMPT="''sub_rp'" ans
-$ ELSE
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
-$ ENDIF
-$ fastread := yes
+$ echo ""
+$ deferred_fastread =1
+$ goto myread
$ ENDIF
$ IF (ans .EQS. "&-s")
$ THEN
$ echo4 "(OK, I will run with -s after this question.)"
$ echo ""
-$ IF len_rp .GT. 210
-$ THEN
-$ i_rp = 0
-$ thirdread_rp_loop:
-$ sub_rp = F$EXTRACT(i_rp,COLUMNS,rp)
-$ echo4 "''sub_rp'"
-$ i_rp = i_rp + COLUMNS
-$ IF i_rp .LT. len_rp THEN GOTO thirdread_rp_loop
-$ READ SYS$COMMAND/PROMPT="''sub_rp'" ans
-$ ELSE
-$ READ SYS$COMMAND/PROMPT="''rp'" ans
+$ deferred_silent = 1
+$ goto myread
$ ENDIF
+$ if (bool_dflt .nes. "")
+$ then
+$ if (ans .eqs. "") then ans = bool_dflt
+$ ans = f$extract(0,1,f$edit(ans,"collapse,upcase"))
+$ if (ans .eqs. "Y" .or. ans .eqs. "1" .or. ans .eqs. "T")
+$ then
+$ ans = "Y"
+$ else
+$ if (ans .eqs. "N" .or. ans .eqs. "0" .or. ans .eqs. "F")
+$ then
+$ ans = "N"
+$ else
+$ echo4 "Input not understood please answer 'Yes' or 'No'"
+$ goto myread
+$ endif
+$ endif
+$ bool_dflt = ""
+$ else
+$ ans = f$edit(ans,"trim,compress")
+$ if (ans .eqs. "") then ans = dflt
+$ if (f$edit(ans,"upcase") .eqs. "NONE") then ans = ""
+$ endif
+$ if f$type(deferred_silent) .nes. ""
+$ then
$ silent := true
$ GOSUB Shut_up
+$ delete/symbol deferred_silent
$ ENDIF
-$ Endif
+$ if f$type(deferred_fastread) .nes. ""
+$ then
+$ fastread = 1
+$ delete/symbol deferred_fastread
+$ endif
$ RETURN
$!
$Beyond_myread:
unless you want to help in developing and debugging Perl.
$ EOD
-$ dflt="n"
-$ rp="Do you really want to continue? [''dflt'] "
-$ IF (fastread) THEN fastread := FALSE
+$ bool_dflt="n"
+$ rp="Do you really want to continue? [''bool_dflt'] "
+$ fastread_save = fastread
+$ fastread := FALSE
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
+$ fastread = fastread_save
+$ delete/symbol fastread_save
$ IF ans
$ THEN
$ echo4 "Okay, continuing."
$ IF .NOT.($status.EQ.%X08D78053)
$ THEN
$ firsttime=""
-$ dflt = "n"
-$ rp = "Would you like to see the instructions? [''dflt'] "
+$ bool_dflt = "n"
+$ rp = "Would you like to see the instructions? [''bool_dflt'] "
$ GOSUB myread
$ if .NOT.ans THEN needman=""
$ ENDIF
brackets; typing carriage return will give you the default.
$ EOD
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
$ DECK
options.
$ EOD
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
$ DECK
$!If you make a mistake on a question, there is no easy way to back up to it
$!currently.
$!
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ IF (F$SEARCH("[-.CONFIG]INSTRUCT.").EQS."")
$ THEN
$ OPEN/WRITE CONFIG [-.CONFIG]INSTRUCT.
$! echo "Go find a public domain implementation or fix your PATH setting!"
$! echo ""
$! echo "Don't worry if any of the following aren't found..."
-$!: determine whether symbolic links are supported !sfn
+$!: determine whether symbolic links are supported !sfn !jem- further down
$!: see whether [:lower:] and [:upper:] are supported character classes !sfn
$!: set up the translation script tr, must be called with ./tr of course !sfn
$!
$ ENDIF
$Config_sh_found:
$ IF F$TYPE(osname) .EQS. "" THEN osname = F$EDIT(F$GETSYI("NODE_SWTYPE"),"COLLAPSE")
-$ IF F$TYPE(config_dflt) .EQS. "" THEN config_dflt = "n"
-$ rp = "Shall I @ ''config_sh' for default answers? [''config_dflt'] "
+$ bool_dflt = "n"
+$ IF F$TYPE(config_dflt) .NES. "" THEN bool_dflt = config_dflt
+$ rp = "Shall I use ''config_sh' for default answers? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = config_dflt
$ IF ans
$ THEN
$ echo ""
$ echo "Fetching default answers from ''config_sh'..."
$!
-$! This @ is why config_sh must employ DCL syntax. Note that for
-$! symbols to be returned to this procedure they must be global.
-$! Which implies that assignments must be of the :== or == variety.
-$! Note further that the [-]config.sh file written by this procedure
-$! employs shell syntax. In order to convert shell syntax to DCL
-$! you might try:
-$!
-$! perl -ni -e "s/^#/!#/;s/='/==""/;s/'$/""/;print ""\$ $_"";" config.sh
-$!
-$! However, watch out for sig_nam, sig_nam_init, sig_num, startperl
-$! and any of the lower case double quoted variables such as the *format
-$! variables in such a config."sh".
-$!
-$ @'config_sh'
+$! we do our own parsing of the shell-script stuff
+$! ...and only accept symbols if they're in the | delimited list below
+$!
+$ config_symbols0 ="|archlib|archlibexp|bin|binexp|builddir|cf_email|config_sh|installarchlib|installbin|installman1dir|installman3dir|"
+$ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|"
+$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|"
+$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|usemultiplicity|usemymalloc|usedebugging_perl|useperlio|usesecurelog|"
+$ config_symbols4 ="|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
+$ config_symbols5 ="|buildmake|builder|"
+$!
+$ open/read CONFIG 'config_sh'
+$ rd_conf_loop:
+$ read/end=erd_conf_loop CONFIG line
+$ line = f$edit(line,"trim")
+$ if line .eqs. "" .or. f$extract(0,1,line) .eqs. "#" then goto rd_conf_loop
+$ sym = f$element(0,"=",line)
+$ if sym .eqs. "=" then goto rd_conf_loop
+$ dsym = "|"+sym+"|"
+$ k = 0
+$ rd_ck_loop:
+$ syms = config_symbols'k'
+$ j = f$locate(dsym, syms)
+$ if j .lt. f$length(syms) then goto erd_ck_loop
+$ k = k + 1
+$ if k .lt. 6 then goto rd_ck_loop
+$ goto rd_conf_loop
+$ erd_ck_loop:
+$ val = f$element(1,"=",line)
+$ val = f$extract(1,f$length(val)-2,val)
+$ write sys$output "''sym' = ""''val'"""
+$ 'sym' = "''val'"
+$ goto rd_conf_loop
+$ erd_conf_loop:
+$ close CONFIG
+$ delete/symbol config_symbols0
+$ delete/symbol config_symbols1
+$ delete/symbol config_symbols2
+$ delete/symbol config_symbols3
+$ delete/symbol config_symbols4
+$ delete/symbol config_symbols5
+$ delete/symbol sym
+$ delete/symbol val
+$ delete/symbol dsym
+$ if f$type(usedebugging_perl) .nes. ""
+$ then
+$ useperldebug = usedebugging_perl
+$ delete/symbol usedebugging_perl
+$ endif
$!
$ ENDIF
-$ DELETE/SYMBOL config_dflt
+$ if f$type(config_dflt) .nes. "" then DELETE/SYMBOL config_dflt
$!
$!we actually do not have "hints/" for VMS
$! TYPE SYS$INPUT:
$! EOD
$! echo " ","VMS_VAX"
$! echo " ","VMS_AXP"
+$! echo " ","VMS_IA64"
$! : Now look for a hint file osname_osvers, unless one has been
$! : specified already.
$! TYPE SYS$INPUT:
This procedure is intended to Configure the building of Perl for VMS.
$ EOD
-$ READ SYS$COMMAND/PROMPT="Continue anyway? [n] " ans
+$ bool_dflt = "n"
+$ GOSUB myread
$ IF ans
$ THEN
$ echo4 "Continuing..."
$ STOP
$ EXIT 2 !$STATUS = "%X00000002" (error)
$ ENDIF
-$ ELSE !we are on VMS huzzah!
-$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
-$ DECK
-
-Configure uses the operating system name and version to set some defaults.
-The default value is probably right if the name rings a bell. Otherwise,
-since spelling matters for me, either accept the default or answer "none"
-to leave it blank.
-$ EOD
-$ ENDIF
-$ rp = "Operating system name? [''osname'] "
-$ GOSUB myread
-$ IF ans.nes.""
-$ THEN
-$ IF (ans.NES.osname) !.AND.knowitall
-$ THEN
-$ echo4 "I'll go with ''osname' anyway..."
-$ ENDIF
-$ ENDIF
$ ENDIF !(osname .NES./.EQS. "VMS")
$!
$!: who configured the system
$ ELSE
$ tzspan = "''tzhour' hours"
$ ENDIF
-$ dflt = "y"
+$ bool_dflt = "y"
$ echo "Your system is ''tzspan' ''direction'UTC in England."
-$ rp = "(''systz') Is this UTC Time Zone Offset correct? [''dflt'] "
+$ rp = "(''systz') Is this UTC Time Zone Offset correct? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.OR.(ans.EQS."")
+$ IF ans
$ THEN
$ tzneedset = "f"
$ tzd = systz
$! "VMS_AXP" from here on to allow cross-platform configuration (e.g.
$! configure a VAX build on an Alpha).
$!
-$ IF (F$GETSYI("HW_MODEL") .LT. 1024)
+$ IF (F$GETSYI("HW_MODEL") .LT. 1024 .AND. F$GETSYI("HW_MODEL") .GT. 0)
$ THEN
$ archname = "VMS_VAX"
-$ otherarch = "an Alpha"
+$ otherarch = "an Alpha or IA64"
$ alignbytes="8"
$ arch_type = "ARCH-TYPE=__VAX__"
$ ELSE
-$ archname = "VMS_AXP"
-$ otherarch = "a VAX"
+$ IF (F$GETSYI("ARCH_TYPE") .EQ. 2)
+$ THEN
+$ archname = "VMS_AXP"
+$ otherarch = "a VAX or IA64"
+$ arch_type = "ARCH-TYPE=__AXP__"
+$ ELSE
+$ archname = "VMS_IA64"
+$ otherarch = "a VAX or Alpha"
+$ arch_type = "ARCH-TYPE=__IA64__"
+$ ENDIF
$ alignbytes="8"
-$ arch_type = "ARCH-TYPE=__AXP__"
$ ENDIF
+$ dflt = archname
$ rp = "What is your architecture name? [''archname'] "
$ GOSUB myread
$ IF ans.NES.""
$ echo4 "I'll go with ''archname' anyway..."
$ ENDIF
$ ENDIF
-$ dflt = "n"
+$ bool_dflt = "n"
$ vms_prefix = "perl_root"
$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE")
-$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''dflt'] "
+$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] "
$ GOSUB myread
-$ if ans .EQS. "" THEN ans = dflt
$ IF .NOT. ans
$ THEN
$ sharedperl = "N"
$ THEN
$ macros = macros + """AXE=1"","
$ ENDIF
+$ IF (archname.EQS."VMS_IA64")
+$ THEN
+$ macros = macros + """IXE=1"","
+$ ENDIF
$ ENDIF
$!
$!: is AFS running? !sfn
$ IF F$TYPE(prefix) .EQS. ""
$ THEN
$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]"
-$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - ".;"
+$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;"
$ prefixbase = prefix - "]"
$! Add _ROOT to make install PERL_ROOT differ from build directory.
$ prefix = prefixbase + "_ROOT.]"
$! Check here for writability of requested PERL_ROOT if it is not the default (cwd).
$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable.
$!
-$ IF .NOT. F$GETDVI(perl_root,"MNT")
-$ THEN
-$ tmp = F$PARSE(perl_root,,,"DEVICE",)
-$ echo4 "''tmp' is not mounted."
-$ ELSE
$ tmp = perl_root - ".]" + "]"
-$ dflt = F$PARSE(tmp,,,,)
+$ dflt = f$parse(tmp,,,,)
$ IF dflt .eqs. ""
$ THEN
$ echo4 "''tmp' does not yet exist."
$ ELSE
$ echo4 "''tmp' already exists."
$ ENDIF
-$ ENDIF
$!
$ vms_skip_install = "true"
-$ dflt = "y"
+$ bool_dflt = "y"
$! echo ""
-$ rp = "Skip the remaining """"where install"""" questions? [''dflt'] "
+$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] "
$ GOSUB myread
-$ IF (.NOT.ans).AND.(ans.NES."") THEN vms_skip_install = "false"
+$ IF (.NOT.ans) THEN vms_skip_install = "false"
$ IF (.NOT.vms_skip_install)
$ THEN
$!
$ rp = "Pathname where the private library files will reside? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN privlib = ans
-$ ELSE privlib = dflt
-$ ENDIF
+$ privlib = ans
$!
$ ENDIF !%Config-I-VMS, skip remaining "where install" questions
$!
$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true
$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = ""
$ IF perl_symbol
-$ THEN dflt = "y"
-$ ELSE dflt = "n"
+$ THEN bool_dflt = "y"
+$ ELSE bool_dflt = "n"
$ ENDIF
$ IF .NOT.silent
$ THEN
$ echO "If you do not do so then you would need a DCL command verb at the"
$ echo "process or the system wide level."
$ ENDIF
-$ rp = "Invoke perl as a global symbol foreign command? [''dflt'] "
+$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] "
$ GOSUB myread
-$ IF (ans.EQS."") THEN ans = dflt
$ IF (.NOT.ans) THEN perl_symbol = "false"
$!
$ IF (.NOT.perl_symbol)
$ THEN
$ IF perl_verb .EQS. "DCLTABLES"
-$ THEN dflt = "n"
-$ ELSE dflt = "y"
+$ THEN bool_dflt = "n"
+$ ELSE bool_dflt = "y"
$ ENDIF
$ IF .NOT.silent
$ THEN
$ echo "verb in a per-process table or in the system wide DCLTABLES (which"
$ echo "would require write privilege)."
$ ENDIF
-$ rp = "Invoke perl as a per process command verb? [ ''dflt' ] "
+$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] "
$ GOSUB myread
-$ IF (ans.EQS."") THEN ans = dflt
$ IF (.NOT.ans)
$ THEN perl_verb = "DCLTABLES"
$ ELSE perl_verb = "PROCESS"
$!: get the patchlevel
$ echo ""
$ echo4 "Getting the current patchlevel..."
+$ patchlevel="0"
+$ subversion="0"
+$ api_revision="0"
+$ api_version="0"
+$ api_subversion="0"
+$ perl_patchlevel="0"
$ patchlevel_h = F$SEARCH("[-]patchlevel.h")
$ IF (patchlevel_h.NES."")
$ THEN
$ got_api_revision = "false"
$ got_api_version = "false"
$ got_api_subversion = "false"
+$ got_perl_patchlevel= "false"
$ OPEN/READONLY CONFIG 'patchlevel_h'
$Patchlevel_h_loop:
$ READ/END_Of_File=Close_patch/ERROR=Close_patch CONFIG line
$ api_subversion = F$ELEMENT(2," ",line)
$ got_api_subversion = "true"
$ ENDIF
+$ IF ((F$LOCATE("""DEVEL",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "DEVEL"
+$ got_perl_patchlevel = "true"
+$ ENDIF
$ IF (.NOT. got_patch) .OR. -
(.NOT. got_sub) .OR. -
(.NOT. got_api_revision) .OR. -
(.NOT. got_api_version) .OR. -
- (.NOT. got_api_subversion) -
+ (.NOT. got_api_subversion) .OR. -
+ (.NOT. got_perl_patchlevel) -
THEN GOTO Patchlevel_h_loop
$Close_patch:
$ CLOSE CONFIG
-$ ELSE
-$ patchlevel="0"
-$ subversion="0"
-$ api_revision="0"
-$ api_version="0"
-$ api_subversion="0"
$ ENDIF
-$ IF (F$STRING(subversion) .NES. "0")
+$!
+$ IF F$SEARCH("[-].patch") .NES. ""
$ THEN
-$ echo "(You have ''package' revision ''revision' patchlevel ''patchlevel' subversion ''subversion'.)"
-$ ELSE
-$ echo "(You have ''package' revision ''revision' patchlevel ''patchlevel'.)"
+$ SET NOON
+$ OPEN/READ PATCH [-].patch
+$ READ PATCH line
+$ CLOSE PATCH
+$ tmp = F$EDIT(line,"COLLAPSE")
+$ SET ON
+$ IF tmp .GT. perl_patchlevel then perl_patchlevel = tmp
+$ ENDIF
+$!
+$ version_patchlevel_string = "version ''patchlevel' subversion ''subversion'"
+$ IF got_perl_patchlevel .AND. perl_patchlevel .NES. "0"
+$ THEN
+$ version_patchlevel_string = "''version_patchlevel_string' patch ''perl_patchlevel'"
$ ENDIF
+$ echo "(You have ''package' ''version_patchlevel_string'.)"
$!
$ version = revision + "_" + patchlevel + "_" + subversion
$!
$ rp = "Where do you want to put the public architecture-dependent libraries? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN archlib = ans
-$ ELSE archlib = dflt
-$ ENDIF
+$ archlib = ans
$!
$ ENDIF !%Config-I-VMS, skip "where install" questions
$!
$ rp = "Pathname for the site-specific library files? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN sitelib = ans
-$ ELSE sitelib = dflt
-$ ENDIF
+$ sitelib = ans
$!
$!: determine where site specific architecture-dependent libraries go.
$ IF .NOT.silent
$ rp = "Pathname for the site-specific architecture-dependent library files? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN sitearch = ans
-$ ELSE sitearch = dflt
-$ ENDIF
+$ sitearch = ans
$!
$!: determine where old public architecture dependent libraries might be
$!
$ IF F$TYPE(bin) .NES. ""
$ THEN dflt = bin
$! ELSE dflt = prefix - ".]" + ".BIN]"
-$ ELSE dflt = "/''vms_prefix'/000000"
+$ ELSE dflt = "/''vms_prefix'"
$ ENDIF
$ rp = "Pathname where the public executables will reside? "
$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
$ GOSUB myread
-$ IF ans.NES.""
-$ THEN bin = ans
-$ ELSE bin = dflt
+$ bin = ans
+$!
+$!: determine where add-on public executables go
+$ IF F$TYPE(sitebin) .NES. ""
+$ THEN dflt = sitebin
+$ ELSE dflt = "''vms_prefix':[bin.''archname']"
$ ENDIF
+$ rp = "Pathname where the add-on public executables should be installed? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ sitebin = ans
$!
$!: determine where manual pages are on this system
$!: What suffix to use on installed man pages
$ IF F$TYPE(archlib).EQS."" THEN -
archlib="''vms_prefix':[lib.''archname'.''version']"
$ IF F$TYPE(bin) .EQS. "" THEN -
- bin="/''vms_prefix'/000000"
+ bin="/''vms_prefix'"
$ IF F$TYPE(privlib) .EQS. "" THEN -
privlib ="''vms_prefix':[lib]"
$ IF F$TYPE(sitearch) .EQS. "" THEN -
sitearch="''vms_prefix':[lib.site_perl.''archname']"
$ IF F$TYPE(sitelib) .EQS. "" THEN -
sitelib ="''vms_prefix':[lib.site_perl]"
+$ IF F$TYPE(sitebin) .EQS. "" THEN -
+ sitebin="''vms_prefix':[bin.''archname']"
$ ENDIF !%Config-I-VMS, skip "where install" questions
$!
$! These derived locations can be set whether we've opted to
$ WRITE CONFIG "}"
$ CLOSE CONFIG
$!
-$! DEFINE SYS$ERROR _NLA0:
-$! DEFINE SYS$OUTPUT _NLA0:
+$ SET NOON
+$ DEFINE/USER_MODE SYS$ERROR _NLA0:
+$ DEFINE/USER_MODE SYS$OUTPUT _NLA0:
$ cc/NoObj/list=ccvms.lis ccvms.c
$ tmp = $status
-$! DEASSIGN SYS$OUTPUT
-$! DEASSIGN SYS$ERROR
+$ SET ON
$ IF (silent) THEN GOSUB Shut_up
$ IF tmp.NE.%X10B90001
$ THEN
$ THEN
$ echo "Will try cc/decc..."
$ ENDIF
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ SET NOON
$ cc/decc/NoObj/list=ccvms.lis ccvms.c
$ tmp = $status
$ SET ON
$ vms_cc_available = vms_cc_available + "cc/decc "
$ ENDIF
$ ELSE
-$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line))
+$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line)) -
+ .or.(F$LOCATE("HP",F$EDIT(line,"UPCASE")).NE.F$LENGTH(line))
$ THEN
$ vms_cc_dflt = "/decc"
$ vms_cc_available = vms_cc_available + "cc/decc "
$Gcc_initial_check:
$ echo "Checking for gcc"
$ OPEN/WRITE CONFIG gccvers.lis
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR CONFIG
$ DEFINE/USER_MODE SYS$OUTPUT CONFIG
$ 'gcc_symbol'/noobj/version _nla0:
$ tmp = $status
+$ SET ON
$ IF (silent) THEN GOSUB Shut_up
$ CLOSE CONFIG
$ IF (tmp.NE.%X10000001).and.(tmp.ne.%X00030001)
$ SET NOON
$ DEFINE/USER_MODE SYS$OUTPUT NL:
$ DEFINE/USER_MODE SYS$ERROR NL:
-$ link ccvms.obj
+$ link/nodebug ccvms.obj
$ tmp = $status
$ SET ON
$ ! success $status with:
$ THEN
$ ans = F$EDIT(ans,"TRIM, COMPRESS, LOWERCASE")
$ Mcc = ans
-$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans))
+$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans)) -
+ .or.(F$LOCATE("hp",ans).NE.F$LENGTH(ans))
$ THEN
$ Mcc = "cc/decc"
$! CPQ ?
$ IF (silent) THEN GOSUB Shut_up
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ link deccvers.obj
+$ link/nodebug deccvers.obj
$ tmp = $status
$ IF (silent) THEN GOSUB Shut_up
$ OPEN/WRITE CONFIG deccvers.out
$ echo "You are using Dec C ''line'"
$ ccversion = line
$ Dec_C_Version = F$INTEGER(line)
-$ IF Dec_C_Version .GE. 60200000
+$ IF Dec_C_Version .GE. 60200000 .AND. archname .NES. "VMS_VAX"
$ THEN
$ echo4 "adding /NOANSI_ALIAS qualifier to ccflags."
$ ccflags = ccflags + "/NOANSI_ALIAS"
$ THEN
$ IF F$LOCATE("VAXCRTL",gcclib_olb).NE.F$LENGTH(gcclib_olb)
$ THEN
-$ link gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
+$ link/nodebug gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
$ tmp = $status
$ ELSE
-$ link gccvers.obj,'gcclib_olb'
+$ link/nodebug gccvers.obj,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ ELSE
$ OPEN/WRITE CONFIG GCCVERS.OPT
$ WRITE CONFIG "SYS$SHARE:VAXCRTL/SHARE"
$ CLOSE CONFIG
-$ link gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
+$ link/nodebug gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ DEASSIGN SYS$ERROR
$ read CONFIG line
$ archsufx = "VAX"
$ ELSE
-$ archsufx = "AXP"
+$ IF archname .EQS. "VMS_AXP"
+$ THEN
+$ archsufx = "AXP"
+$ ELSE
+$ archsufx = "IA64"
+$ ENDIF
$ ENDIF
$ CLOSE CONFIG
$ line = F$EDIT(line,"TRIM,COMPRESS")
$!: you do not want to know about this
$!: verify guess
$ rp = "Your host name appears to be """"''myhostname'"""". Right? "
+$ bool_dflt = "y"
$ GOSUB myread
-$ IF (.not.ans).and.(ans.NES."")
+$ IF (.not.ans)
$ THEN
$ READ SYS$COMMAND/PROMPT= -
"Please type the (one word) name of your host: " ans
$ IF mydomain.NES."" !no periods in DECnet names like "MYDECNODE::"
$ THEN
$ rp = "What is your domain name? [''mydomain'] "
+$ dflt = mydomain
$ GOSUB myread
-$ IF ans .nes. "" THEN mydomain = ans
+$ mydomain = ans
$!: translate upper to lower if necessary
$ mydomain = F$EDIT(mydomain,"COLLAPSE")
$ mylowdomain = F$EDIT(mydomain," LOWERCASE")
$ dflt = "''cf_by'@''myhostname'"+"''mydomain'"
$ rp = "What is your e-mail address? [''dflt'] "
$ GOSUB myread
-$ IF ans .nes. ""
-$ THEN cf_email = ans
-$ ELSE cf_email = dflt
-$ ENDIF
+$ cf_email = ans
$ ENDIF
$!
$ IF .NOT.silent
$ dflt = "''cf_email'"
$ rp = "Perl administrator e-mail address [''dflt'] "
$ GOSUB myread
-$ IF ans .nes. ""
-$ THEN perladmin = ans
-$ ELSE perladmin = dflt
-$ ENDIF
+$ perladmin = ans
$!
$!: determine where public executable scripts go
$!: determine perl absolute location
$ ELSE
$ Has_socketshr = "F"
$ ENDIF
-$ IF (ccname .EQS. "DEC" .AND. Dec_C_Version .GE. 50200000) .OR. -
- (ccname .EQS. "CXX")
+$ IF (ccname .EQS. "DEC" .AND. Dec_C_Version .GE. 50200000) .OR. (ccname .EQS. "CXX")
$ THEN
$ Has_Dec_C_Sockets = "T"
$ echo ""
$ IF Has_Dec_C_Sockets
$ THEN
$ dflt = "DECC"
-$ else
+$ ELSE
$ dflt = "SOCKETSHR"
-$ endif
+$ ENDIF
$ rp = "Choose socket stack (NONE"
$ IF Has_socketshr THEN rp = rp + ",SOCKETSHR"
$ IF Has_Dec_C_Sockets THEN rp = rp + ",DECC"
$ rp = rp + ") [''dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = "''dflt'"
$ Has_Dec_C_Sockets = "F"
$ Has_socketshr = "F"
$ ans = F$EDIT(ans,"TRIM,COMPRESS,LOWERCASE")
-$ IF ans.eqs."decc" then Has_Dec_C_Sockets = "T"
-$ IF ans.eqs."socketshr" then Has_socketshr = "T"
+$ IF ans.eqs."decc" THEN Has_Dec_C_Sockets = "T"
+$ IF ans.eqs."socketshr" THEN Has_socketshr = "T"
$ ENDIF
$!
$!
$ echo "You should only select this option if you are debugging"
$ echo "perl itself. This can be a useful feature if you are "
$ echo "embedding perl in a program."
-$ dflt = "n"
-$ rp = "Build a VMS-DEBUG version of Perl? [''dflt'] "
+$ bool_dflt = "n"
+$ if f$type(usevmsdebug) .nes. ""
+$ then
+$ if usevmsdebug .or. usevmsdebug .eqs. "define" then bool_dflt="y"
+$ endif
+$ rp = "Build a VMS-DEBUG version of Perl? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
-$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
+$ use_vmsdebug_perl = ans
+$ IF use_vmsdebug_perl
$ THEN
-$ use_vmsdebug_perl = "Y"
+$ usevmsdebug = "define"
$ macros = macros + """__DEBUG__=1"","
$ ELSE
-$ use_vmsdebug_perl = "N"
+$ usevmsdebug = "undef"
$ ENDIF
$!
$! Ask if they want to build with DEBUGGING
$ echo "was mandatory on perl 5.005 and before on VMS, but is now"
$ echo "optional. If you do not generally use it you should probably"
$ echo "leave this off and gain a bit of extra speed."
-$ dflt = "y"
-$ rp = "Build a DEBUGGING version of Perl? [''dflt'] "
+$ bool_dflt = "y"
+$ if f$type(useperldebug) .nes. ""
+$ then
+$ if f$extract(0,1,f$edit(useperldebug,"collapse,upcase")).eqs."N" .or. useperldebug .eqs. "undef" then bool_dflt="n"
+$ endif
+$ rp = "Build a DEBUGGING version of Perl? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
-$ IF F$EXTRACT(0, 1, F$EDIT(ans,"COLLAPSE,UPCASE")) .eqs. "Y"
-$ THEN
-$ use_debugging_perl = "Y"
-$ ELSE
-$ use_debugging_perl = "N"
-$ ENDIF
+$ use_debugging_perl = ans
$!
$! Ask if they want to build with MULTIPLICITY
$ echo ""
$ echo "There is some performance overhead, however, so you"
$ echo "probably do not want to choose this unless you are going to be"
$ echo "doing things with embedded perl."
-$ dflt = "n"
-$ rp = "Build Perl for multiplicity? [''dflt'] "
+$ bool_dflt = "n"
+$ if f$type(usemultiplicity) .nes. ""
+$ then
+$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans.eqs."" then ans = dflt
$ IF ans
$ THEN
$ usemultiplicity="define"
$ ENDIF
$!
$! Ask if they want to build with 64-bit support
-$ IF (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ IF (archname.NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
$ THEN
-$ dflt = "n"
+$ bool_dflt = "n"
$ IF F$TYPE(use64bitint) .NES. ""
$ THEN
-$ IF use64bitint .OR. use64bitint .eqs. "define" THEN dflt = "y"
+$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
$ ENDIF
$ echo ""
-$ echo "You can have native 64-bit long integers."
+$ echo "You have natively 64-bit long integers."
$ echo ""
$ echo "Perl can be built to take advantage of 64-bit integer types"
-$ echo "on some systems, which provide a much larger range for perl's"
-$ echo "mathematical operations. (Note that does *not* enable 64-bit"
-$ echo "fileops at the moment, as Dec C doesn't do that yet)."
+$ echo "on some systems, To do so, Configure can be run with -Duse64bitint."
$ echo "Choosing this option will most probably introduce binary incompatibilities."
$ echo ""
-$ echo "If this does not make any sense to you, just accept the default ''dflt'."
-$ rp = "Try to use 64-bit integers, if available? [''dflt'] "
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
-$ IF ans
-$ THEN use64bitint="Y"
-$ ELSE use64bitint="N"
-$ ENDIF
+$ use64bitint = ans
$!
-$ dflt = "n"
+$ bool_dflt = "n"
$ IF F$TYPE(use64bitall) .NES. ""
$ THEN
-$ IF use64bitall .OR. use64bitall .eqs. "define" THEN dflt = "y"
+$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
$ ENDIF
$ echo ""
$ echo "You may also choose to try maximal 64-bitness. It means using as much"
$ echo "binary incompatibilities. On the other hand, your platform may not"
$ echo "have any more 64-bitness available than what you already have chosen."
$ echo ""
-$ echo "If this does not make any sense to you, just accept the default ''dflt'."
-$ rp = "Try to use maximal 64-bit support, if available? [''dflt'] "
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
-$ IF ans
-$ THEN use64bitall="Y"
-$ ELSE use64bitall="N"
-$ ENDIF
+$ use64bitall=ans
$ IF use64bitall .AND. .NOT. use64bitint
$ THEN
$ echo ""
$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
$ echo "the use of 64-bit integers."
+$ echo "I am also setting the default to use large files if available."
$ use64bitint="Y"
$ ENDIF
-$ ENDIF ! AXP && >= 7.1
+$!
+$ bool_dflt = use64bitall
+$ IF F$TYPE(uselargefiles) .NES. ""
+$ THEN
+$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)"
+$ echo "on some systems. To do so, Configure can be run with -Duselargefiles."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to understand large files, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselargefiles=ans
+$!
+$ ENDIF ! not VAX && >= 7.1
+$!
+$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
+$ THEN
+$ usesitecustomize = "define"
+$ ELSE
+$ usesitecustomize = "undef"
+$ ENDIF
$!
$! Ask about threads, if appropriate
$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ THEN
$ echo ""
-$ echo "This version of Perl can be built with threads. While really nifty,"
-$ echo "they are a beta feature, and there is a speed penalty for perl"
-$ echo "programs if you build with threads *even if you do not use them*."
-$ dflt = "n"
-$ rp = "Build with threads? [''dflt'] "
+$ echo "Perl can be built to take advantage of threads on some systems."
+$ echo "To do so, configure.com can be run with -""Dusethreads""."
+$ echo ""
+$ echo "Note that Perl built with threading support runs slightly slower"
+$ echo "and uses more memory than plain Perl. The current implementation"
+$ echo "is believed to be stable, but it is fairly new, and so should be"
+$ echo "treated with caution."
+$ echo ""
+$ bool_dflt = "n"
+$ if f$type(usethreads) .nes. ""
+$ then
+$ if usethreads .or. usethreads .eqs. "define" then bool_dflt="y"
+$ endif
+$! Catch cases where user specified ithreads or 5005threads but
+$! forgot -Dusethreads
+$ if f$type(useithreads) .nes. ""
+$ then
+$ if useithreads .or. useithreads .eqs. "define" then bool_dflt="y"
+$ endif
+$ if f$type(use5005threads) .nes. ""
+$ then
+$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="y"
+$ endif
+$ echo "If this doesn't make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Build a threading Perl? [''bool_dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ if ans
$ THEN
$ use_threads="T"
-$ ! Shall we do the 5.005-stype threads, or IThreads?
-$ echo "As of 5.5.640, Perl has two different internal threading"
-$ echo "implementations, the 5.005 version (5005threads) and an"
-$ echo "interpreter-based version (ithreads) that has one"
-$ echo "interpreter per thread. Both are very experimental. This"
-$ echo "arrangement exists to help developers work out which one"
-$ echo "is better."
-$ echo ""
-$ echo "If you are a casual user, you probably do not want"
-$ echo "interpreter-threads at this time. There doesn't yet exist"
-$ echo "a way to create threads from within Perl in this model,"
-$ echo "i.e., ""use Thread;"" will NOT work."
+$ ! Shall we do the 5.005-type threads, or IThreads?
+$ echo "Since release 5.6, Perl has had two different threading implementations,"
+$ echo "the newer interpreter-based version (ithreads) with one interpreter per"
+$ echo "thread, and the older 5.005 version (5005threads)."
+$ echo "The 5005threads version is effectively unmaintained and will probably be"
+$ echo "removed in Perl 5.10, so there should be no need to build a Perl using it"
+$ echo "unless needed for backwards compatibility with some existing 5.005threads"
+$ echo "code."
$ echo ""
-$ dflt = "n"
-$ rp = "Build with Interpreter threads? [''dflt'] "
+$ bool_dflt = "y"
+$ if f$type(useithreads) .nes. ""
+$ then
+$ if useithreads .eqs. "undef" then bool_dflt="n"
+$ endif
+$ if f$type(use5005threads) .nes. ""
+$ then
+$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="n"
+$ endif
+$ rp = "Use the newer intepreter-based ithreads? [''bool_dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = dflt
-$ if (f$extract(0, 1, "''ans'").eqs."Y").or.(f$extract(0, 1, "''ans'").eqs."y")
+$ use_ithreads=ans
+$ if use_ithreads
$ THEN
-$ use_ithreads="Y"
$ use_5005_threads="N"
$ ELSE
-$ use_ithreads="N"
$ use_5005_threads="Y"
$ ENDIF
-$ ! Are they on VMS 7.1 on an alpha?
-$ if (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ ! Are they on VMS 7.1 on an alpha or itanium?
+$ if (archname.nes."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
$ THEN
$ echo ""
$ echo "Threaded perl can be linked to use multiple kernel threads"
$ echo "machine. Unfortunately, this feature isn't safe on an"
$ echo "unpatched 7.1 system (several OS patches were required when"
$ echo "this procedure was written)."
-$ dflt = "n"
-$ rp = "Enable multiple kernel threads and upcalls? [''dflt'] "
+$ bool_dflt = "n"
+$ rp = "Enable multiple kernel threads and upcalls? [''bool_dflt'] "
$ gosub myread
-$ if ans.eqs."" then ans="''dflt'"
-$ if f$extract(0, 1, f$edit(ans,"TRIM,COMPRESS,UPCASE")).eqs."Y"
+$ if ans
$ THEN
$ Thread_Live_Dangerously = "MT=MT=1"
$ ENDIF
$ ENDIF
$ ENDIF
$ ENDIF
-$ IF archname .EQS. "VMS_AXP"
+$ IF archname .NES. "VMS_VAX"
$ THEN
$! Case sensitive?
$ echo ""
$ echo ""
$ echo "If you have no idea what this means, and do not have"
$ echo "any program requiring anything, choose the default."
-$ dflt = be_case_sensitive
-$ rp = "Build with case-sensitive symbols? [''dflt'] "
+$ bool_dflt = be_case_sensitive
+$ if f$type(usecasesensitive) .nes. ""
+$ then
+$ if usecasesensitive .or. usecasesensitive .eqs. "define" then bool_dflt = "y"
+$ if f$extract(0,1,f$edit(usecasesensitive,"collapse,upcase")).eqs."N" .or. usecasesensitive .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Build with case-sensitive symbols? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans="''dflt'"
-$ be_case_sensitive = "''ans'"
+$ be_case_sensitive = ans
$! IEEE math?
$ echo ""
$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers"
$ echo "internally on Alpha, but if you need G_FLOAT for binary compatibility"
$ echo "with an external library or existing data, you may wish to disable"
$ echo "the IEEE math option."
-$ dflt = use_ieee_math
-$ rp = "Use IEEE math? [''dflt'] "
+$ bool_dflt = use_ieee_math
+$ if f$type(useieee) .nes. ""
+$ then
+$ if useieee .or. useieee .eqs. "define"
+$ then
+$ bool_dflt="y"
+$ else
+$ bool_dflt="n"
+$ endif
+$ endif
+$ rp = "Use IEEE math? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .eqs. "" THEN ans = "''dflt'"
-$ use_ieee_math = "''ans'"
+$ use_ieee_math = ans
$ ELSE
$ be_case_sensitive = "n"
$ use_ieee_math = "n"
$ ENDIF
+$ useieee = "undef"
+$ usecasesensitive = "undef"
+$ if (use_ieee_math) then useieee = "define"
+$ if (be_case_sensitive) then usecasesensitive = "define"
+$! Unlink all versions?
+$ echo ""
+$ echo "By default, Perl's unlink() provides VMS-like behavior and only"
+$ echo "deletes the latest version of a file. Enabling this option builds"
+$ echo "Perl so that unlink() deletes all versions of a file."
+$ bool_dflt = unlink_all_versions
+$ if f$type(unlink_all_versions) .nes. ""
+$ then
+$ if unlink_all_versions .or. unlink_all_versions .eqs. "define"
+$ then
+$ bool_dflt="y"
+$ else
+$ bool_dflt="n"
+$ endif
+$ endif
+$ rp = "Make unlink() delete all versions of a file? [''bool_dflt'] "
+$ GOSUB myread
+$ unlink_all_versions = ans
+$ IF unlink_all_versions
+$ THEN
+$ d_unlink_all_versions = "define"
+$ ELSE
+$ d_unlink_all_versions = "undef"
+$ ENDIF
$! CC Flags
$ echo ""
$ echo "Your compiler may want other flags. For this question you should include"
$ dflt = user_c_flags
$ rp = "Any additional cc flags? [''dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = "''dflt'"
$ IF ans .EQS. "none" THEN ans = ""
$ user_c_flags = "''ans'"
$!
$ echo "logical name translation during parsing of file specifications;"
$ echo "these always use the normal sequence of access modes for logical"
$ echo "name translation."
-$ dflt = "y"
-$ rp = "Use secure logical name translation? [''dflt'] "
+$ bool_dflt = "y"
+$ if f$type(usesecurelog) .nes. ""
+$ then
+$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Use secure logical name translation? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .eqs. "" THEN ans = dflt
-$ IF ans
-$ THEN d_secintgenv := Y
-$ ELSE d_secintgenv := N
-$ ENDIF
+$ d_secintgenv = ans
+$ usesecurelog = "undef"
+$ if (d_secintgenv) then usesecurelog = "define"
$!
$! Ask whether they want to default filetypes
$ echo ""
$ echo ""
$ echo "This is currently broken in some configurations. Only enable it if"
$ echo "you know what you are doing."
-$ dflt = "n"
-$ rp = "Always use default file types? [''dflt'] "
+$ bool_dflt = "n"
+$ if f$type(usedefaulttypes) .nes. ""
+$ then
+$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y"
+$ endif
+$ rp = "Always use default file types? [''bool_dflt'] "
+$ GOSUB myread
+$ d_alwdeftype = ans
+$ usedefaulttypes = "undef"
+$ if (d_alwdeftype) then usedefaulttypes = "define"
+$!
+$! determine whether to use malloc wrapping
+$ echo ""
+$ bool_dflt = "y"
+$ IF F$TYPE(usemallocwrap) .nes. ""
+$ then
+$ if .NOT. usemallocwrap .or. usemallocwrap .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Do you wish to wrap malloc calls to protect against potential overflows? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
$ IF ans
-$ THEN d_alwdeftype := Y
-$ ELSE d_alwdeftype := N
+$ THEN usemallocwrap = "define"
+$ ELSE usemallocwrap = "undef"
$ ENDIF
+$!
$! Ask if they want to use perl's memory allocator
$ echo ""
$ echo "Perl has a built-in memory allocator that is tuned for normal"
$ echo "memory usage. It is oftentimes better than the standard system"
$ echo "memory allocator. It also has the advantage of providing memory"
$ echo "allocation statistics, if you choose to enable them."
-$ dflt = "n"
-$ IF F$TYPE(usemymalloc) .EQS. "STRING"
-$ THEN
-$ IF usemymalloc THEN dflt = "y"
-$ ENDIF
-$ rp = "Do you wish to attempt to use the malloc that comes with ''package'? [''dflt'] "
+$ bool_dflt = "n"
+$ IF F$TYPE(usemymalloc) .nes. ""
+$ then
+$ if usemymalloc .or. usemymalloc .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Do you wish to attempt to use the malloc that comes with ''package'? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .eqs. "" THEN ans = dflt
-$ IF ans
-$ THEN mymalloc := Y
-$ ELSE mymalloc := N
-$ ENDIF
+$ mymalloc = ans
$ IF mymalloc
$ THEN
$ IF use_debugging_perl
$ echo "Perl can keep statistics on memory usage if you choose to use"
$ echo "them. This is useful for debugging, but does have some"
$ echo "performance overhead."
-$ dflt = "n"
-$ rp = "Do you want the debugging memory allocator? [''dflt'] "
+$ bool_dflt = "n"
+$ rp = "Do you want the debugging memory allocator? [''bool_dflt'] "
$ gosub myread
-$ IF ans .eqs. "" THEN ans = "''dflt'"
-$ use_debugmalloc = f$extract(0, 1, f$edit(ans, "COLLAPSE,UPCASE"))
+$ use_debugmalloc = ans
$ ENDIF
$ ! Check which memory allocator we want
$ echo ""
$ dflt = "DEFAULT"
$ rp = "Memory allocator (DEFAULT, TWO_POT, PACK_MALLOC) [''dflt'] "
$ GOSUB myread
-$ if ans.eqs."" then ans = "''dflt'"
$ if ans.eqs."TWO_POT" then use_two_pot_malloc = "Y"
$ if ans.eqs."PACK_MALLOC" then use_pack_malloc = "Y"
$ ENDIF
xxx = F$EXTRACT(4,line_len - 16,line)
$ IF xxx .EQS. "DynaLoader" THEN goto ext_loop ! omit
$ IF xxx .EQS. "SDBM_File/sdbm" THEN goto ext_loop ! sub extension - omit
+$ IF xxx .EQS. "Devel/PPPort/harness" THEN goto ext_loop ! sub extension - omit
+$ IF F$EXTRACT(0,7,xxx) .EQS. "Encode/" THEN goto ext_loop ! sub extension - omit
+$ IF xxx .EQS. "B/C" THEN goto ext_loop ! sub extension - omit
$ IF F$EXTRACT(0,8,line) .EQS. "vms/ext/" THEN -
xxx = "VMS/" + F$EXTRACT(8,line_len - 20,line)
$ known_extensions = known_extensions + " ''xxx'"
$ THEN
$ dflt = dflt - "Socket" ! optional on VMS
$ ENDIF
-$ IF .NOT. use_ithreads
-$ THEN
-$ dflt = dflt - "threads/shared"
-$ dflt = dflt - "threads"
-$ ENDIF
+$ IF .NOT. use_threads THEN dflt = dflt - "Thread"
$ dflt = F$EDIT(dflt,"TRIM,COMPRESS")
$!
$! Ask for their default list of extensions to build
$ echo "Which modules do you want to build into perl?"
$ rp = "[''dflt'] "
$ GOSUB myread
-$ if ans .eqs. "" then ans = "''dflt'"
$ extensions = F$EDIT(ans,"TRIM,COMPRESS")
$!
$! %Config-I-VMS, determine build/make utility here (make gmake mmk mms)
$ probers = "-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!/IDENT!/IDENT"
$ max_build = 7
$!
-$ orig_dflt = "MMK"
+$ orig_dflt = f$edit(builder,"UPCASE")
+$ if orig_dflt .eqs. "" then orig_dflt = "MMK"
$ default_set = ""
$ ok_builders = ""
$ OPEN/WRITE/ERROR=Open_error CONFIG Makefile.
$Reenable_messages_build:
$ SET MESSAGE 'messages'
$ SET ON
+$ on control_y then goto clean_up
$ n = n + 1
$ IF (n .LT. max_build) THEN GOTO Build_probe
$!
$ ENDIF
$ ENDIF
$!
-$ DELETE/NOLOG Makefile.;
+$ DELETE/NOLOG/NOCONFIRM Makefile.;
$ GOTO Beyond_open
$Open_error:
$ TYPE SYS$INPUT:
$!
$!: locate the preferred pager for this system
$!pagers = "most|more|less|type/page"
-$ dflt = "type/page"
+$ IF osvers .GES. "V6.1"
+$ THEN
+$ dflt = "type/page=save=10"
+$ ELSE
+$ dflt = "type/page"
+$ ENDIF
$! assume that the presence of a most symbol indicates the presence
$! of the pager.
$ IF F$TYPE(most) .EQS. "STRING" THEN dflt = "most"
$ IF F$TYPE(pager) .EQS. "STRING" THEN dflt = pager
$ rp="What pager is used on your system? [''dflt'] "
$ GOSUB myread
-$ IF (ans .EQS. "")
-$ THEN pager = dflt
-$ ELSE pager = ans
-$ ENDIF
+$ pager = ans
$!
$! update [.vms]config.vms here
$!
$!
$ IF use_ieee_math
$ THEN
-$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm_results"
+$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm"
$ ENDIF
$ IF be_case_sensitive
$ THEN
$!
$! PerlIO abstraction
$!
-$ dflt = "y"
+$ bool_dflt = "y"
$ IF F$TYPE(useperlio) .NES. ""
-$ THEN
-$ IF useperlio .EQS. "undef" THEN dflt = "n"
-$ ENDIF
+$ then
+$ if f$extract(0,1,f$edit(useperlio,"collapse,upcase")) .eqs. "N" .or. useperlio .eqs. "undef" then bool_dflt = "n"
+$ endif
$ IF .NOT. silent
$ THEN
$ echo "Previous versions of ''package' used the standard IO mechanisms as"
Using PerlIO with sfio may cause problems with some extension modules.
$ EOD
-$ echo "If this does not make any sense to you, just accept the default '" + dflt + "'."
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
$ ENDIF
-$ rp = "Use the PerlIO abstraction layer? [''dflt'] "
+$ rp = "Use the PerlIO abstraction layer? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" THEN ans = dflt
$ IF ans
$ THEN
$ useperlio = "define"
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ use64bitint = "define"
-$ uselargefiles = "define"
$ uselongdouble = "define"
$ alignbytes="16"
$ usemorebits = "define"
$ uvXUformat="""LX"""
$ ELSE
$ use64bitint = "undef"
-$ uselargefiles = "undef"
$ uselongdouble = "undef"
$ usemorebits = "undef"
$ ivdformat="""ld"""
$ ELSE
$ use64bitall = "undef"
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ uselargefiles = "define"
+$ ELSE
+$ uselargefiles = "undef"
+$ ENDIF
$!
-$ usemymalloc=mymalloc
+$ usemymalloc = "undef"
+$ if mymalloc then usemymalloc = "define"
$!
$ perl_cc=Mcc
$!
$ exe_ext=".axe"
$ lib_ext=".alb"
$ ELSE
-$ obj_ext=".obj"
-$ so="exe"
-$ dlext="exe"
-$ exe_ext=".exe"
-$ lib_ext=".olb"
+$ IF (sharedperl .AND. archname .EQS. "VMS_IA64")
+$ THEN
+$ obj_ext=".ibj"
+$ so="ixe"
+$ dlext="ixe"
+$ exe_ext=".ixe"
+$ lib_ext=".ilb"
+$ ELSE
+$ obj_ext=".obj"
+$ so="exe"
+$ dlext="exe"
+$ exe_ext=".exe"
+$ lib_ext=".olb"
+$ ENDIF
$ ENDIF
$ dlobj="dl_vms''obj_ext'"
$!
-$ cppstdin="''perl_cc'/noobj/preprocess=sys$output sys$input"
+$ cppstdin="''perl_cc'/noobj/comments=as_is/preprocess=sys$output sys$input"
$ cppminus=" "
-$ cpprun="''perl_cc'/noobj/preprocess=sys$output sys$input"
+$ cpprun="''perl_cc'/noobj/comments=as_is/preprocess=sys$output sys$input"
$ cpplast=" "
$!
$ timetype="time_t"
$ startperl="""$ perl 'f$env(\""procedure\"")' \""'"+"'p1'\"" \""'"+"'p2'\"" \""'"+"'p3'\"" \""'"+"'p4'\"" \""'"+"'p5'\"" \""'"+"'p6'\"" \""'"+"'p7'\"" \""'"+"'p8'\""!\n"
$ startperl=startperl + "$ exit++ + ++$status!=0 and $exit=$status=undef; while($#ARGV != -1 and $ARGV[$#ARGV] eq '"+"'){pop @ARGV;}"""
$!
-$ IF ((Use_Threads) .AND. (vms_ver .LES. "6.2"))
+$ IF ((use_threads) .AND. (vms_ver .LES. "6.2"))
$ THEN
$ libs="SYS$SHARE:CMA$LIB_SHR.EXE/SHARE SYS$SHARE:CMA$RTL.EXE/SHARE SYS$SHARE:CMA$OPEN_LIB_SHR.exe/SHARE SYS$SHARE:CMA$OPEN_RTL.exe/SHARE"
$ ELSE
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ d_PRId64 = "define"
-$ d_PRIEUldbl = "define"
-$ d_PRIFUldbl = "define"
-$ d_PRIGUldbl = "define"
-$ d_PRIeldbl = "define"
-$ d_PRIfldbl = "define"
-$ d_PRIgldbl = "define"
$ d_PRIu64 = "define"
$ d_PRIo64 = "define"
$ d_PRIx64 = "define"
$ d_PRIXU64 = "define"
$ sPRId64 = """Ld"""
-$ sPRIEUldbl = """LE"""
-$ sPRIFUldbl = """LF"""
-$ sPRIGUldbl = """LG"""
$ sPRIXU64 = """LX"""
-$ sPRIeldbl = """Le"""
-$ sPRIfldbl = """Lf"""
-$ sPRIgldbl = """Lg"""
$ sPRIi64 = """Li"""
$ sPRIo64 = """Lo"""
$ sPRIu64 = """Lu"""
$ d_isnan = "define"
$ d_isnanl = "define"
$ d_modfl = "define"
+$ d_modflproto = "define"
$ ELSE
$ d_PRId64 = "undef"
-$ d_PRIEUldbl = "define"
-$ d_PRIFUldbl = "define"
-$ d_PRIGUldbl = "define"
$ d_PRIXU64 = "undef"
-$ d_PRIeldbl = "define"
-$ d_PRIfldbl = "undef"
-$ d_PRIgldbl = "undef"
$ d_PRIu64 = "undef"
$ d_PRIo64 = "undef"
$ d_PRIx64 = "undef"
$ sPRId64 = ""
-$ sPRIEUldbl = """E"""
-$ sPRIFUldbl = """F"""
-$ sPRIGUldbl = """G"""
$ sPRIXU64 = """lX"""
-$ sPRIeldbl = """e"""
-$ sPRIfldbl = """f"""
-$ sPRIgldbl = """g"""
$ sPRIi64 = ""
$ sPRIo64 = ""
$ sPRIu64 = ""
$ d_isnan = "undef"
$ d_isnanl = "undef"
$ d_modfl = "undef"
+$ d_modflproto = "undef"
$ ENDIF
-$ d_SCNfldbl = d_PRIfldbl
-$ sSCNfldbl = sPRIfldbl ! expect consistency
$!
$! Now some that we build up
$!
-$ IF Use_Threads
+$ IF use_threads
$ THEN
$ IF use_5005_threads
$ THEN
$!
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#pragma message disable ALL" ! VAX compilers may have distracting informationals
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
$ echo "Your long doubles are ''longdblsize' bytes long."
$ ENDIF
$!
+$ IF d_longdbl .OR. d_longdbl .EQS. "define"
+$ THEN
+$ d_PRIEUldbl = "define"
+$ d_PRIFUldbl = "define"
+$ d_PRIGUldbl = "define"
+$ d_PRIeldbl = "define"
+$ d_PRIfldbl = "define"
+$ d_PRIgldbl = "define"
+$ sPRIEUldbl = """LE"""
+$ sPRIFUldbl = """LF"""
+$ sPRIGUldbl = """LG"""
+$ sPRIeldbl = """Le"""
+$ sPRIfldbl = """Lf"""
+$ sPRIgldbl = """Lg"""
+$ ELSE
+$ d_PRIEUldbl = "undef"
+$ d_PRIFUldbl = "undef"
+$ d_PRIGUldbl = "undef"
+$ d_PRIeldbl = "undef"
+$ d_PRIfldbl = "undef"
+$ d_PRIgldbl = "undef"
+$ sPRIEUldbl = ""
+$ sPRIFUldbl = ""
+$ sPRIGUldbl = ""
+$ sPRIeldbl = ""
+$ sPRIfldbl = ""
+$ sPRIgldbl = ""
+$ ENDIF
+$ d_SCNfldbl = d_PRIfldbl
+$ sSCNfldbl = sPRIfldbl ! expect consistency
+$!
$!: check for long long
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ GOSUB inhdr
$ i_unistd = tmp
$!
+$! do we have getppid()?
+$!
+$ IF i_unistd .EQS. "define"
+$ THEN
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <unistd.h>"
+$ WS "int main() {"
+$ WS "printf(""%d\n"",getppid());"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "getppid"
+$ GOSUB inlibc
+$ d_getppid = tmp
+$ ELSE
+$ d_getppid = "undef"
+$ ENDIF
+$!
$!: see if this is a libutil.h system
$!
$ tmp = "libutil.h"
$ echo "You do not have int64_t."
$ ENDIF
$!
+$! Check to see if fseeko exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL;"
+$ WS "fseeko(f,(off_t)0,SEEK_SET);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "fseeko"
+$ GOSUB inlibc
+$ d_fseeko = tmp
+$!
+$! Check to see if ftello exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL; off_t o=0;"
+$ WS "o=ftello(f);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "ftello"
+$ GOSUB inlibc
+$ d_ftello = tmp
+$!
$!: see if this is a netdb.h system
$ IF Has_Dec_C_Sockets
$ THEN
$ GOSUB inhdr
$ i_sysfile = tmp
$!
+$!
+$! Check for sys/ioctl.h
+$!
+$ tmp = "sys/ioctl.h"
+$ GOSUB inhdr
+$ i_sysioctl = tmp
+$!
$! Check for sys/utsname.h
$!
$ tmp = "sys/utsname.h"
$ GOSUB inlibc
$ d_strtoq = tmp
$!
-$! Check for strtoq
-$!
-$ OS
-$ WS "#if defined(__DECC) || defined(__DECCXX)"
-$ WS "#include <stdlib.h>"
-$ WS "#endif"
-$ WS "#include <string.h>"
-$ WS "int main()"
-$ WS "{"
-$ WS "__int64 result;"
-$ WS "result = strtoq(""123123"", NULL, 10);"
-$ WS "exit(0);"
-$ WS "}"
-$ CS
-$ tmp = "strtoq"
-$ GOSUB inlibc
-$ d_strtoq = tmp
-$!
$! Check for strtold
$!
$ OS
$ GOSUB inlibc
$ d_mkdtemp = tmp
$!
+$! Check for poll
+$!
+$ if i_poll .eqs. "define"
+$ then
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <poll.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "struct pollfd pfd;"
+$ WS "int count=poll(&pfd,1,0);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "poll"
+$ GOSUB inlibc
+$ d_poll = tmp
+$ else
+$ d_poll = "undef"
+$ endif
+$!
$! Check for setvbuf
$!
$ OS
$ d_getsent="undef"
$ ENDIF
$!
+$! Check for nanosleep
+$!
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <time.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "int asleep = nanosleep(NULL,NULL);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "nanosleep"
+$ GOSUB inlibc
+$ d_nanosleep = tmp
+$!
$! Check for socklen_t
$!
$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
$ sched_yield = " "
$ ENDIF
$!
+$! Check for pthread_attr_setscope and PTHREAD_SCOPE_SYSTEM.
+$! (The actual test is to be written.)
+$!
+$ d_pthread_attr_setscope="undef"
+$!
$! Check for generic pointer size
$!
$ echo4 "Checking to see how big your pointers are..."
$ sizesize = tmp
$ echo "Your ''zzz' size is ''sizesize' bytes."
$!
+$! Check for _LARGEFILE capability.
+$!
+$ off_t_size = 4
+$ OS
+$ WS "#define _LARGEFILE"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "printf(""%d\n"", sizeof(off_t));"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ off_t_size = tmp
+$ ENDIF
+$ echo "Your off_t size is ''off_t_size' bytes when _LARGEFILE is defined."
+$ IF off_t_size .ne. 8 .AND. (uselargefiles .OR. uselargefiles .eqs. "define")
+$ THEN
+$ echo4 "You configured with -Duselargefiles but your CRTL does not support _LARGEFILE."
+$ echo4 "I'm disabling large file support."
+$ uselargefiles = "undef"
+$ ENDIF
+$!
+$! Tests for hard link, symbolic links, and 7.3 + CRTL features
+$!
+$ d_lchown = "undef"
+$ d_link = "undef"
+$ d_lstat = "undef"
+$ d_readlink = "undef"
+$ d_symlink = "undef"
+$ d_realpath = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$!
+$! Hard link support has been present since 7.3-1 except for the
+$! easy to use DCL test to see if hardlinks are enabled on the build
+$! disk. That would require more work to test, and I am only testing
+$! this on 8.2, so that is why the 8.2 test.
+$!
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ IF f$getdvi("SYS$DISK","HARDLINKS_SUPPORTED")
+$ THEN
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links enabled on build disk."
+$ echo "I will build with hard link support"
+$ d_link = "define"
+$ ELSE
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links disabled on build disk."
+$ echo "I will not build with hard link support."
+$ ENDIF
+$ ELSE
+$ echo4 "I can not dected if your CRTL and build disk support hard links."
+$ echo4 "I am disabling hard link support."
+$ ENDIF
+$!
+$ IF uselargefiles .OR. uselargefiles .eqs. "define"
+$ THEN
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ echo4 -
+ "Looking for the realpath() function to indicate symbolic link support..."
+$ OS
+$! WS "#include <stdlib.h>"
+$ WS "void exit(int foo);"
+$ WS "char *realpath(const char *file_name, char * resolved_name, ...);"
+$ WS "int main()"
+$ WS "{"
+$ WS "char result[255];"
+$ WS "realpath(""foo"",result);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
+$ THEN
+$ echo -
+ "Found realpath() which indicates symbolic link support is present."
+$ d_lchown = "define"
+$ d_lstat = "define"
+$ d_readlink = "define"
+$ d_symlink = "define"
+$! d_realpath = "define" ! Perl will not put it in the config.h file?
+$! Perl apparently does not use a built in realpath() on other platforms,
+$! but there is a severe performance penatly on OpenVMS to use the Perl
+$! script that implements a realpath(). The d_symlink symbol is used
+$! as a replacement for the d_realpath since they are related and both
+$! were activated by the CRTL at the same time.
+$!
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ THEN
+$ echo4 "-duselargefiles is required for symbolic link support."
+$ echo4 "You did not specify that, so I am disabling symbolic link support."
+$ ENDIF
+$ ENDIF
+$!
+$!
+$! Check for grp.h -- should be 7.3 and later, but test to be sure
+$!
+$ tmp = "grp.h"
+$ GOSUB inhdr
+$ i_grp = tmp
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$! Only implementing right now on 8.2 because that is what I am testing.
+$!
+$ d_getgrgid_r = "undef"
+$ getgrgid_r_proto = "0"
+$ d_getgrnam_r = "undef"
+$ getgrnam_r_proto = "0"
+$ d_getpgid = "undef"
+$ d_getpgrp = "undef"
+$! N.B. We already have home-grown thread-safe versions of
+$! getpwnam and getpwuid -- no need to use CRTL versions
+$ d_getpwnam_r = "undef"
+$ getpwnam_r_proto = "0"
+$ d_getpwuid_r = "undef"
+$ getpwuid_r_proto = "0"
+$ d_setgrent = "undef"
+$ d_ttyname_r = "undef"
+$ ttyname_r_proto = "0"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with V7.3-2 routines"
+$ d_getgrgid_r = "define"
+$ getgrgid_r_proto = "1"
+$ d_getgrnam_r = "define"
+$ getgrnam_r_proto = "1"
+$ if d_symlink .or. d_symlink .EQS. "define"
+$ then
+$! FIXME: Need to find how to activate this.
+$! d_getpgid = "define"
+$! d_getpgrp = "define"
+$ endif
+$ d_setgrent = "define"
+$ d_ttyname_r = "define"
+$ ttyname_r_proto = "1"
+$ endif
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$! Only implementing right now on 8.2 because that is what I am testing
+$! These functions may require POSIX UIDs/GIDs to be active, so I am
+$! not activating the features at this time, just preparing this file
+$! to easily use them in the future.
+$!
+$ d_seteuid = "undef"
+$ d_setpgid = "undef"
+$ d_setpgrp = "undef"
+$ d_setregid = "undef"
+$ d_setreuid = "undef"
+$ d_setsid = "undef"
+$! tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$tmp = "" ! Disable this section for now.
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with V7.3-2 UID setting routines"
+$ d_seteuid = "define"
+$ d_setpgid = "define"
+$ d_setpgrp = "define"
+$ d_setregid = "define"
+$ d_setreuid = "define"
+$ d_setsid = "define"
+$ endif
+$!
+$! VMS V8 powered options
+$! We know that it is only available for 8.2 and later on 64 bit platforms.
+$!
+$ d_fstatvfs = "undef"
+$! d_statvfs = "undef"
+$ i_sysstatvfs = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with 8.2 routines"
+$ d_fstatvfs = "define"
+$! d_statvfs = "define"
+$ i_sysstatvfs = "define"
+$ endif
+$!
$! Check rand48 and its ilk
$!
$ echo4 "Looking for a random number function..."
$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
$ THEN
$ drand01 = "drand48()"
+$ randbits = "48"
+$ randfunc = "drand48"
$ randseedtype = "long int"
$ seedfunc = "srand48"
$ echo4 "Good, found drand48()."
$ ELSE
$ d_drand48proto = "undef"
$ drand01="random()"
+$ randbits = "31"
+$ randfunc = "random"
$ randseedtype = "unsigned"
$ seedfunc = "srandom"
$ OS
$ echo4 "OK, found random()."
$ ELSE
$ drand01="(((float)rand())*MY_INV_RAND_MAX)"
+$ randfunc = "rand"
$ randseedtype = "unsigned"
$ seedfunc = "srand"
$ echo4 "Yick, looks like I have to use rand()."
$ d_msync="define"
$ d_ualarm="define"
$ d_uname="define"
+$! d_unsetenv="define" ! Fix me - Activating requires changing VMS code
+$ d_unsetenv="undef" ! Change will be needed to allow GNV integration
+$ d_clearenv="undef"
$ d_usleep="define"
$ d_setitimer="define"
$ d_sigaction="define"
$ d_wait4="define"
$ d_index="define"
$ pidtype="pid_t"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 RTMIN RTMAX"",0"
+$ sig_name1="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM "
+$ sig_name2="TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU "
+$ sig_name3="DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 "
+$ sig_name4="WINCH "
+$ sig_namert="RTMIN RTMAX"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",""SPARE18"",""SPARE19"",""CHLD"",""CONT"",""STOP"",""TSTP"","
-$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"",""RTMIN"",""RTMAX"",0"
-$ sig_name_init = psnwc1 + psnwc2 + psnwc3
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 64"",0"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,64,0"
-$! perl_sig_num_with_commas=sig_num_init
-$ sig_size="36"
+$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"","
+$ psnwc4_v7_3="""WINCH"","
+$ psnwcrt="""RTMIN"",""RTMAX"",0"
+$ sig_num1="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 "
+$ sig_num_v7_3="28 "
+$ sig_numrt="33 64"
+$ sig_num_init1="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,"
+$ sig_num_init_v7_3="28,"
+$ sig_num_initrt="33,64,0"
+$ if (vms_ver .GES. "7.3")
+$ then
+$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_name4 + sig_namert
+$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwc4_v7_3 + psnwcrt
+$ sig_num = sig_num1 + sig_num_v7_3 + sig_numrt
+$ sig_num_init = sig_num_init1 + sig_num_v7_3 + sig_num_initrt
+$ sig_size="37"
+$ else
+$ sig_name = sig_name1 + sig_name2 + sig_name3 + sig_namert
+$ sig_name_init = psnwc1 + psnwc2 + psnwc3 + psnwcrt
+$ sig_num = sig_num1 + sig_numrt
+$ sig_num_init = sig_num_init1 + sig_num_initrt
+$ sig_size="36"
+$ endif
+$ sig_count="64"
$ uidtype="uid_t"
$ d_pathconf="define"
$ d_fpathconf="define"
$ d_msync="undef"
$ d_ualarm="undef"
$ d_uname="undef"
+$ d_unsetenv="undef"
+$ d_clearenv="undef"
$ d_usleep="undef"
$ d_setitimer="undef"
$ d_sigaction="undef"
$ d_truncate="undef"
$ d_wait4="undef"
$ d_index="undef"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"",0"
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"",0"
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
-$! perl_sig_num_with_commas=sig_num_init
$ sig_size="19"
+$ sig_count="15"
+$ if (vms_ver .GES. "6.2") then sig_count="17"
$ uidtype="unsigned int"
$ d_pathconf="undef"
$ d_fpathconf="undef"
$ d_stdio_cnt_lval="define"
$ d_stdio_ptr_lval="define"
$ d_stdstdio="define"
+$ d_faststdio="define"
$ d_wcstombs="define"
$ d_mblen="define"
$ d_mktime="define"
$ i_locale="define"
$ i_langinfo="define"
$ d_locconv="define"
-$ d_nl_langinfo="define"
+$ IF vms_ver .GES. "6.2"
+$ THEN
+$ d_nl_langinfo="define"
+$ ELSE
+$ d_nl_langinfo="undef"
+$ ENDIF
$ d_setlocale="define"
$ vms_cc_type="decc"
$ ELSE
$ d_stdio_cnt_lval="undef"
$ d_stdio_ptr_lval="undef"
$ d_stdstdio="undef"
+$ d_faststdio="undef"
$ d_wcstombs="undef"
$ d_mblen="undef"
$ d_mktime="undef"
$ ENDIF
$ d_stdio_ptr_lval_sets_cnt="undef"
$ d_stdio_ptr_lval_nochange_cnt="define"
+$ usefaststdio="undef"
$!
$! Sockets?
$ if Has_Socketshr .OR. Has_Dec_C_Sockets
$ d_vms_do_sockets="define"
$ d_htonl="define"
$ d_socket="define"
+$ d_sockpair = "undef"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ if (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with socketpair support"
+$ d_sockpair = "define"
+$ endif
$ d_select="define"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ d_vms_do_sockets="undef"
$ d_htonl="undef"
$ d_socket="undef"
+$ d_socketpair = "undef"
$ d_select="undef"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ THEN
$ d_nv_preserves_uv = "define"
$ echo "Yes, they can."
-$ d_nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
+$ nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
$ ELSE
$ d_nv_preserves_uv = "undef"
$ echo "No, they can't."
$ WS " printf(""%d\n"", i);"
$ WS " exit(0);"
$ WS "}"
+$ CS
$ GOSUB compile
-$ d_nv_preserves_uv_bits = tmp
+$ nv_preserves_uv_bits = tmp
+$ ENDIF
+$!
+$ echo4 "Checking if kill() uses SYS$FORCEX or can't be called from a signal handler..."
+$ kill_by_sigprc = "undef"
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <signal.h>"
+$ WS "#include <unistd.h>"
+$ WS "void handler1(int s) { printf(""%d"",s); kill(getpid(),2); }"
+$ WS "void handler2(int s) { printf(""%d"",s); }"
+$ WS "main(){"
+$ WS " printf(""0"");"
+$ WS " signal(1,handler1);"
+$ WS " signal(2,handler2);"
+$ WS " kill(getpid(),1);"
+$ WS " sleep(1);"
+$ WS " printf(""\n"");"
+$ WS "}"
+$ CS
+$ ON ERROR THEN CONTINUE
+$ GOSUB compile
+$ IF tmp .NES. "012"
+$ THEN
+$ echo4 "Yes, it has at least one of those limitations."
+$ echo4 "Checking whether we can use SYS$SIGPRC instead..."
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <lib$routines.h>"
+$ WS "unsigned long code = 0;"
+$ WS "int handler(unsigned long *args) {"
+$ WS " code = args[1];"
+$ WS " return 1;"
+$ WS "}"
+$ WS "main() { "
+$ WS " int iss, sys$sigprc();"
+$ WS " lib$establish(handler);"
+$ WS " iss = sys$sigprc(0,0,0x1234);"
+$ WS " iss = ((iss&1)==1 && code == 0x1234);"
+$ WS " printf(""%d\n"",iss);"
+$ WS "}"
+$ CS
+$ ON ERROR THEN CONTINUE
+$ GOSUB compile
+$ IF tmp .EQS. "1"
+$ THEN
+$ echo4 "Yep, we can."
+$ kill_by_sigprc = "define"
+$!
+$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
+$! sigusr1 and sigusr2 show up in VMS6.2 and later
+$!
+$ if vms_ver .GES. "6.2"
+$ then
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
+$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
+$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
+$ sig_name_init = psnwc1 + psnwc2
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
+$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
+$ sig_size="19"
+$ sig_count="17"
+$ else
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT"
+$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
+$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",0"
+$ sig_name_init = psnwc1 + psnwc2
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6"
+$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,0"
+$ sig_size="17"
+$ sig_count="15"
+$ endif
+$ ELSE
+$ echo4 "Nope, we can't."
+$ ENDIF
+$ ELSE
+$ echo4 "Nope, it doesn't."
$ ENDIF
$ DELETE/SYMBOL tmp
$!
$ WC "# Configuration by : " + cf_by
$ WC "# Target system : " + myuname
$ WC ""
-$ WC "CONFIG='true'"
$ WC "Makefile_SH='" + Makefile_SH + "'"
$ WC "Mcc='" + Mcc + "'"
$ WC "PERL_REVISION='" + revision + "'"
$ WC "PERL_VERSION='" + patchlevel + "'"
$ WC "PERL_SUBVERSION='" + subversion + "'"
+$ WC "PERL_API_REVISION='" + api_revision + "'"
$ WC "PERL_API_VERSION='" + api_version + "'"
$ WC "PERL_API_SUBVERSION='" + api_subversion + "'"
+$ WC "PERL_PATCHLEVEL='" + perl_patchlevel + "'"
+$ WC "PERL_CONFIG_SH='true'"
+$ WC "_a='" + lib_ext + "'"
+$ WC "_exe='" + exe_ext + "'"
+$ WC "_o='" + obj_ext + "'"
$ WC "alignbytes='" + alignbytes + "'"
$ WC "aphostname='write sys$output f$edit(f$getsyi(\""SCSNODE\""),\""TRIM,LOWERCASE\"")'"
$ WC "ar='" + "'"
$ WC "cc='" + perl_cc + "'"
$ WC "cccdlflags='" + cccdlflags + "'"
$ WC "ccdlflags='" + ccdlflags + "'"
-$ WC "ccflags='" + ccflags + "'"
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$! Perl can not use _USE_STD_STAT at the moment
+$! IF d_symlink .OR. d_symlink .EQS. "define"
+$! THEN
+$! ccdefines = "_USE_STD_STAT=1"
+$! ELSE
+$ ccdefines = "_LARGEFILE=1"
+$! ENDIF
+$ ELSE
+$ ccdefines = ""
+$ ENDIF
+$ IF ccdefines .NES. ""
+$ THEN
+$ WC "ccflags='" + ccflags + "/Define=" + ccdefines + "'"
+$ ELSE
+$ WC "ccflags='" + ccflags + "'"
+$ ENDIF
+$ WC "ccflags_uselargefiles='" + "'"
$ WC "ccname='" + ccname + "'"
$ WC "ccversion='" + ccversion + "'"
$ WC "cf_by='" + cf_by + "'"
$ WC "d__fwalk='undef'"
$ WC "d_access='" + d_access + "'"
$ WC "d_accessx='undef'"
+$ WC "d_aintl='undef'"
$ WC "d_alarm='define'"
$ WC "d_archlib='define'"
$ WC "d_atolf='" + d_atolf + "'"
$ WC "d_atoll='" + d_atoll + "'"
-$ WC "d_attribut='" + d_attribut + "'"
+$ WC "d_attribute_format='" + d_attribut + "'"
+$ WC "d_attribute_malloc='undef'"
+$ WC "d_attribute_nonnull='undef'"
+$ WC "d_attribute_noreturn='undef'"
+$ WC "d_attribute_pure='undef'"
+$ WC "d_attribute_unused='undef'"
+$ WC "d_attribute_warn_unused_result='undef'"
$ WC "d_bcmp='" + d_bcmp + "'"
$ WC "d_bcopy='" + d_bcopy + "'"
$ WC "d_bincompat3='undef'"
-$ WC "d_bincompat5005='undef'"
$! WC "d_bsdpgrp='undef'"
$ WC "d_bsdgetpgrp='undef'"
$ WC "d_bsdsetpgrp='undef'"
$ WC "d_class='undef'"
$ WC "d_cmsghdr_s='undef'"
$ WC "d_const='define'"
+$ WC "d_copysignl='define'"
$ WC "d_crypt='define'"
$ WC "d_csh='undef'"
$ WC "d_cuserid='define'"
$ WC "d_dbl_dig='define'"
$ WC "d_dbminitproto='undef'"
$ WC "d_difftime='define'"
-$ WC "d_dirnamlen='define'"
+$ WC "d_dirfd='undef'"
+$ tmp = f$extract(1,3,f$edit(f$getsyi("VERSION"),"TRIM,COLLAPSE"))
+$ IF (tmp .GES. "8.2") .AND. (f$getsyi("HW_MODEL") .GE. 1024)
+$ then
+$! Sorry, CRTL does not have this, and in order to support
+$! POSIX filespecifications, the CRTL readdir() structures
+$! need to be used globaly for now.
+$ echo "Building for OpenVMS 8.2 uses CRTL dirent.h, so no dirnamlen member"
+$ WC "d_dirnamlen='undef'"
+$ else
+$ WC "d_dirnamlen='define'"
+$ endif
$ WC "d_dlerror='undef'"
$ WC "d_dlsymun='undef'"
$ WC "d_dosuid='undef'"
$ WC "d_fpos64_t='" + d_fpos64_t + "'"
$ WC "d_frexpl='" + d_frexpl + "'"
$ WC "d_fs_data_s='undef'"
-$ WC "d_fseeko='undef'"
+$ WC "d_fseeko='" + d_fseeko + "'"
$ WC "d_fsetpos='define'"
$ WC "d_fstatfs='undef'"
-$ WC "d_fstatvfs='undef'"
+$ WC "d_fstatvfs='" + d_fstatvfs + "'"
$ WC "d_fsync='undef'"
-$ WC "d_ftello='undef'"
+$ WC "d_ftello='" + d_ftello + "'"
$ WC "d_getcwd='define'"
$ WC "d_getespwnam='undef'"
$ WC "d_getfsstat='undef'"
$ WC "d_getpbyname='" + d_getpbyname + "'"
$ WC "d_getpbynumber='" + d_getpbynumber + "'"
$ WC "d_getpent='" + d_getpent + "'"
-$ WC "d_getpgid='undef'"
+$ WC "d_getpgid='" + d_getpgid + "'"
$ WC "d_getpgrp2='undef'"
-$ WC "d_getpgrp='undef'"
-$ WC "d_getppid='undef'"
+$ WC "d_getpgrp='" + d_getpgrp + "'"
+$ WC "d_getppid='" + d_getppid + "'"
$ WC "d_getprior='undef'"
$ WC "d_getprotoprotos='" + d_getprotoprotos + "'"
$ WC "d_getprpwnam='undef'"
$ WC "d_grpasswd='undef'"
$ WC "d_hasmntopt='undef'"
$ WC "d_htonl='" + d_htonl + "'"
+$ WC "d_ilogbl='undef'"
$ WC "d_index='" + d_index + "'"
$ WC "d_inetaton='undef'"
$ WC "d_int64_t='" + d_int64_t + "'"
$ WC "d_isnan='" + d_isnan + "'"
$ WC "d_isnanl='" + d_isnanl + "'"
$ WC "d_killpg='undef'"
-$ WC "d_lchown='undef'"
+$ WC "d_lchown='" + d_lchown + "'"
$ WC "d_ldbl_dig='define'"
-$ WC "d_link='undef'"
+$ WC "d_libm_lib_version='undef'"
+$ WC "d_link='" + d_link + "'"
$ WC "d_llseek='undef'"
$ WC "d_locconv='" + d_locconv + "'"
$ WC "d_lockf='undef'"
$ WC "d_longdbl='" + d_longdbl + "'"
$ WC "d_longlong='" + d_longlong + "'"
$ WC "d_lseekproto='define'"
-$ WC "d_lstat='undef'"
+$ WC "d_lstat='" + d_lstat + "'"
$ WC "d_madvise='undef'"
+$ WC "d_malloc_size='undef'"
+$ WC "d_malloc_good_size='undef'"
$ WC "d_mblen='" + d_mblen + "'"
$ WC "d_mbstowcs='" + d_mbstowcs + "'"
$ WC "d_mbtowc='" + d_mbtowc + "'"
$ WC "d_mktime='" + d_mktime + "'"
$ WC "d_mmap='" + d_mmap + "'"
$ WC "d_modfl='" + d_modfl + "'"
+$ WC "d_modflproto='" + d_modflproto + "'"
$ WC "d_modfl_pow32_bug='undef'"
$ WC "d_mprotect='" + d_mprotect + "'"
$ WC "d_msg='undef'"
$ WC "d_msync='" + d_msync + "'"
$ WC "d_munmap='" + d_munmap + "'"
$ WC "d_mymalloc='" + d_mymalloc + "'"
+$ WC "d_nanosleep='" + d_nanosleep + "'"
$ WC "d_nice='define'"
$ WC "d_nl_langinfo='" + d_nl_langinfo + "'"
$ WC "d_nv_preserves_uv='" + d_nv_preserves_uv + "'"
-$ WC "d_nv_preserves_uv_bits='" + d_nv_preserves_uv_bits + "'"
+$ WC "nv_preserves_uv_bits='" + nv_preserves_uv_bits + "'"
+$ WC "d_nv_zero_is_allbits_zero='define'"
$ WC "d_off64_t='" + d_off64_t + "'"
$ WC "d_old_pthread_create_joinable='" + d_old_pthread_create_joinable + "'"
$ WC "d_oldarchlib='define'"
$ WC "d_perl_otherlibdirs='undef'"
$ WC "d_phostname='" + d_phostname + "'"
$ WC "d_pipe='define'"
-$ WC "d_poll='undef'"
+$ WC "d_poll='" + d_poll + "'"
+$ WC "d_procselfexe='undef'"
$ WC "d_pthread_atfork='undef'"
+$ WC "d_pthread_attr_setscope='" + d_pthread_attr_setscope + "'"
$ WC "d_pthread_yield='" + d_pthread_yield + "'"
$ WC "d_pthreads_created_joinable='" + d_pthreads_created_joinable + "'"
$ WC "d_pwage='undef'"
$ WC "d_qgcvt='undef'"
$ WC "d_quad='" + d_quad + "'"
$ WC "d_readdir='define'"
-$ WC "d_readlink='undef'"
+$ WC "d_readlink='" + d_readlink + "'"
$ WC "d_readv='undef'"
-$ WC "d_realpath='undef'"
+$ WC "d_realpath='" + d_realpath + "'"
$ WC "d_recvmsg='undef'"
$ WC "d_rename='define'"
$ WC "d_rewinddir='define'"
$ WC "d_safemcpy='define'"
$ WC "d_sanemcmp='define'"
$ WC "d_sbrkproto='define'"
+$ WC "d_scalbnl='undef'"
$ WC "d_sched_yield='" + d_sched_yield + "'"
$ WC "d_scm_rights='undef'"
$ WC "d_seekdir='define'"
$ WC "d_sendmsg='undef'"
$ WC "d_setegid='undef'"
$ WC "d_setenv='" + d_setenv + "'"
-$ WC "d_seteuid='undef'"
-$ WC "d_setgrent='undef'"
+$ WC "d_seteuid='" + d_seteuid + "'"
+$ WC "d_setgrent='" + d_setgrent + "'"
$ WC "d_setgrps='undef'"
$ WC "d_sethent='" + d_sethent + "'"
$ WC "d_setitimer='" + d_setitimer + "'"
$ WC "d_setlocale='" + d_setlocale + "'"
$ WC "d_setnent='" + d_setnent + "'"
$ WC "d_setpent='" + d_setpent + "'"
-$ WC "d_setpgid='undef'"
+$ WC "d_setpgid='" + d_setpgid + "'"
$ WC "d_setpgrp2='undef'"
-$ WC "d_setpgrp='undef'"
+$ WC "d_setpgrp='" + d_setpgrp + "'"
$ WC "d_setprior='undef'"
$ WC "d_setproctitle='" + d_setproctitle + "'"
$ WC "d_setpwent='define'"
-$ WC "d_setregid='undef'"
+$ WC "d_setregid='" + d_setregid + "'"
$ WC "d_setresgid='undef'"
$ WC "d_setresuid='undef'"
-$ WC "d_setreuid='undef'"
+$ WC "d_setreuid='" + d_setreuid + "'"
$ WC "d_setrgid='undef'"
$ WC "d_setruid='undef'"
$ WC "d_setsent='" + d_setsent + "'"
-$ WC "d_setsid='undef'"
+$ WC "d_setsid='" + d_setsid + "'"
$ WC "d_setvbuf='" + d_setvbuf + "'"
$ WC "d_sfio='undef'"
$ WC "d_shm='undef'"
$ WC "d_sockatmarkproto='undef'"
$ WC "d_socket='" + d_socket + "'"
$ WC "d_socklen_t='" + d_socklen_t + "'"
-$ WC "d_sockpair='undef'"
+$ WC "d_sockpair='" + d_sockpair + "'"
$ WC "d_socks5_init='undef'"
+$ WC "d_sprintf_returns_strlen='define'"
$ WC "d_sqrtl='define'"
$ WC "d_sresgproto='undef'"
$ WC "d_sresgproto='undef'"
$ WC "d_stdio_stream_array='undef'"
$ WC "d_stdiobase='" + d_stdiobase + "'"
$ WC "d_stdstdio='" + d_stdstdio + "'"
+$ WC "d_faststdio='" + d_faststdio + "'"
$ WC "d_strchr='define'"
$ WC "d_strcoll='" + d_strcoll + "'"
$ WC "d_strctcpy='define'"
$ WC "d_strerrm='strerror((e),vaxc$errno)'"
$ WC "d_strerror='define'"
$ WC "d_strftime='define'"
+$ WC "d_strlcat='undef'"
+$ WC "d_strlcpy='undef'"
$ WC "d_strtod='define'"
$ WC "d_strtol='define'"
$ WC "d_strtold='" + d_strtold + "'"
$ WC "d_strtoll='" + d_strtoll + "'"
-$ WC "d_strtoq='define'"
+$ WC "d_strtoq='" + d_strtoq + "'"
$ WC "d_strtoul='define'"
$ WC "d_strtoull='" + d_strtoull + "'"
$ WC "d_strtouq='" + d_strtouq + "'"
$ WC "d_strxfrm='" + d_strxfrm + "'"
$ WC "d_suidsafe='undef'"
-$ WC "d_symlink='undef'"
+$ WC "d_symlink='" + d_symlink + "'"
$ WC "d_syscall='undef'"
$ WC "d_syscallproto='undef'"
$ WC "d_sysconf='" + d_sysconf + "'"
$ WC "d_tcsetpgrp='undef'"
$ WC "d_telldir='define'"
$ WC "d_telldirproto='define'"
+$ WC "d_time='define'"
$ WC "d_times='define'"
+$ IF ("''F$EXTRACT(1,3, F$GETSYI(""VERSION""))'".GES."7.0")
+$ THEN
+$ WC "d_tm_tm_gmtoff='define'"
+$ WC "d_tm_tm_zone='define'"
+$ ELSE
+$ WC "d_tm_tm_gmtoff='undef'"
+$ WC "d_tm_tm_zone='undef'"
+$ ENDIF
$ WC "d_truncate='" + d_truncate + "'"
$ WC "d_tzname='" + d_tzname + "'"
$ WC "d_u32align='define'"
$ WC "d_umask='define'"
$ WC "d_uname='" + d_uname + "'"
$ WC "d_union_semun='undef'"
-$ WC "d_unlink_all_versions='undef'"
+$ WC "d_unlink_all_versions='" + d_unlink_all_versions + "'" ! VMS-specific
$ WC "d_unordered='undef'"
+$ WC "d_unsetenv='" + d_unsetenv + "'"
+$ WC "d_clearenv='" + d_clearenv + "'"
$ WC "d_usleep='" + d_usleep + "'"
$ WC "d_usleepproto='" + d_usleep + "'"
$ WC "d_ustat='undef'"
$ WC "d_writev='undef'"
$ WC "db_hashtype=' '"
$ WC "db_prefixtype=' '"
+$ WC "db_version_major='" + "'"
+$ WC "db_version_minor='" + "'"
+$ WC "db_version_patch='" + "'"
$ WC "dbgprefix='" + dbgprefix + "'"
$ WC "defvoidused='15'"
$ WC "devtype='" + devtype + "'"
$ DELETE/SYMBOL tmp
$ WC "eagain=' '"
$ WC "ebcdic='undef'"
-$ WC "embedmymalloc='" + mymalloc + "'"
+$ WC "embedmymalloc='" + usemymalloc + "'"
$ WC "eunicefix=':'"
$ WC "exe_ext='" + exe_ext + "'"
$!
$ WC "i8size='" + i8size + "'"
$ WC "i8type='" + i8type + "'"
$ WC "i_arpainet='undef'"
+$ WC "i_crypt='undef'"
+$ WC "i_db='undef'"
$ WC "i_dbm='undef'"
$ WC "i_dirent='" + i_dirent + "'"
$ WC "i_dlfcn='undef'"
$ WC "i_float='define'"
$ WC "i_fp='undef'"
$ WC "i_fp_class='undef'"
-$ WC "i_grp='undef'"
+$ WC "i_grp='" + i_grp + "'"
$ WC "i_ieeefp='undef'"
$ WC "i_inttypes='" + i_inttypes + "'"
$ WC "i_langinfo='" + i_langinfo + "'"
$ WC "i_sysaccess='" + i_sysaccess + "'"
$ WC "i_sysdir='undef'"
$ WC "i_sysfile='" + i_sysfile + "'"
-$ WC "i_sysioctl='undef'"
+$ WC "i_sysioctl='" + i_sysioctl + "'"
$ WC "i_syslog='" + i_syslog + "'"
$ WC "i_sysmman='undef'"
$ WC "i_sysmode='" + i_sysmode + "'"
$ WC "i_syssockio='undef'"
$ WC "i_sysstat='define'"
$ WC "i_sysstatfs='undef'"
-$ WC "i_sysstatvfs='undef'"
+$ WC "i_sysstatvfs='" + i_sysstatvfs + "'"
$ WC "i_systime='undef'"
$ WC "i_systimek='undef'"
$ WC "i_systimes='undef'"
$ WC "installbin='" + installbin + "'"
$ WC "installman1dir='" + installman1dir + "'"
$ WC "installman3dir='" + installman3dir + "'"
+$ WC "installprefix='" + vms_prefix + "'"
+$ WC "installprefixexp='" + vms_prefix + ":'"
$ WC "installprivlib='" + installprivlib + "'"
$ WC "installscript='" + installscript + "'"
$ WC "installsitearch='" + installsitearch + "'"
+$ WC "installsitebin='" + sitebin + "'"
$ WC "installsitelib='" + installsitelib + "'"
$ WC "installusrbinperl='undef'"
$ WC "intsize='" + intsize + "'"
$ WC "ld='" + ld + "'"
$ WC "lddlflags='/Share'"
$ WC "ldflags='" + ldflags + "'"
+$ WC "ldflags_uselargefiles='" + "'"
$ WC "lib_ext='" + lib_ext + "'"
$ WC "libc='" + libc + "'"
$ WC "libpth='/sys$share /sys$library'"
$ WC "libs='" + libs + "'"
+$ WC "libswanted='" + "'"
+$ WC "libswanted_uselargefiles='" + "'"
$ WC "longdblsize='" + longdblsize + "'"
$ WC "longlongsize='" + longlongsize + "'"
$ WC "longsize='" + longsize + "'"
-$ WC "lseeksize='4'"
-$ WC "lseektype='int'"
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ WC "lseeksize='8'"
+$ WC "lseektype='off_t'"
+$ ELSE
+$ WC "lseeksize='4'"
+$ WC "lseektype='int'"
+$ ENDIF
$ WC "mab='" + "'"
$ WC "make='" + make + "'"
$ WC "malloctype='void *'"
+$ WC "usemallocwrap='" + usemallocwrap + "'"
$ WC "man1ext='rno'"
$ WC "man3ext='rno'"
$ WC "mmaptype='void *'"
$ WC "netdb_host_type='" + netdb_host_type + "'"
$ WC "netdb_name_type='" + netdb_name_type + "'"
$ WC "netdb_net_type='" + netdb_net_type + "'"
+$ WC "nonxs_ext='" + nonxs_ext + "'"
$ WC "nveformat='" + nveformat + "'"
$ WC "nvfformat='" + nvfformat + "'"
$ WC "nvgformat='" + nvgformat + "'"
$ WC "perl_root='" + perl_root + "'" ! VMS specific $trnlnm()
$ WC "perladmin='" + perladmin + "'"
$ WC "perllibs='" + perllibs + "'"
+$ WC "perlpath='" + "''vms_prefix':[000000]Perl''exe_ext'" + "'"
+$ WC "perl_symbol='" + perl_symbol + "'" ! VMS specific
+$ WC "perl_verb='" + perl_verb + "'" ! VMS specific
$ WC "pgflquota='" + pgflquota + "'"
$ WC "pidtype='" + pidtype + "'"
-$ WC "pm_apiversion='" + version + "'"
-$! WC "prefix='" + vms_prefix + "'"
-$ WC "prefix='" + prefix + "'"
+$ WC "prefix='" + vms_prefix + "'"
+$ WC "prefixexp='" + vms_prefix + ":'"
$ WC "privlib='" + privlib + "'"
$ WC "privlibexp='" + privlibexp + "'"
+$ WC "procselfexe=' '"
$ WC "prototype='define'"
$ WC "ptrsize='" + ptrsize + "'"
$ WC "quadkind='" + quadkind + "'"
$ WC "quadtype='" + quadtype + "'"
-$ WC "randbits='31'"
+$ WC "randbits='" + randbits + "'"
+$ WC "randfunc='" + randfunc + "'"
$ WC "randseedtype='" + randseedtype + "'"
$ WC "ranlib='" + "'"
$ WC "rd_nodata=' '"
$ WC "sSCNfldbl='" + sSCNfldbl + "'"
$ WC "sched_yield='" + sched_yield + "'"
$ WC "scriptdir='" + scriptdir + "'"
+$ WC "scriptdirexp='" + scriptdir + "'" ! use scriptdir for now
$ WC "seedfunc='" + seedfunc + "'"
$ WC "selectminbits='32'"
$ WC "selecttype='" + selecttype + "'"
$ DELETE/SYMBOL tmp
$ WC "sig_num='" + sig_num + "'"
$ WC "sig_num_init='" + sig_num_init + "'"
+$ WC "sig_count='" + sig_count + "'"
$ WC "sig_size='" + sig_size + "'"
$ WC "signal_t='" + signal_t + "'"
$ WC "sitearch='" + sitearch + "'"
$ WC "sitearchexp='" + sitearchexp + "'"
+$ WC "sitebin='" + sitebin + "'"
+$ WC "sitebinexp='" + sitebin + "'"
$ WC "sitelib='" + sitelib + "'"
$ WC "sitelib_stem='" + sitelib_stem + "'"
$ WC "sitelibexp='" + sitelibexp + "'"
+$ WC "siteprefix='" + vms_prefix + "'"
+$ WC "siteprefixexp='" + vms_prefix + ":'"
$ WC "sizesize='" + sizesize + "'"
$ WC "sizetype='size_t'"
$ WC "so='" + so + "'"
$ WC "use5005threads='" + use5005threads + "'"
$ WC "use64bitall='" + use64bitall + "'"
$ WC "use64bitint='" + use64bitint + "'"
-$ WC "usedebugging_perl='" + use_debugging_perl + "'"
+$ WC "usecasesensitive='" + be_case_sensitive + "'" ! VMS-specific
+$ WC "usedebugging_perl='"+use_debugging_perl+"'"
+$ WC "usedefaulttypes='" + usedefaulttypes + "'" ! VMS-specific
$ WC "usecrosscompile='undef'"
$ WC "usedl='" + usedl + "'"
+$ WC "usefaststdio='" + usefaststdio + "'"
+$ WC "useieee='" + useieee + "'" ! VMS-specific
$ WC "useithreads='" + useithreads + "'"
$ WC "uselargefiles='" + uselargefiles + "'"
$ WC "uselongdouble='" + uselongdouble + "'"
$ WC "useperlio='" + useperlio + "'"
$ WC "useposix='false'"
$ WC "usereentrant='undef'"
+$ WC "userelocatableinc='undef'"
+$ WC "usesecurelog='" + usesecurelog + "'" ! VMS-specific
+$ WC "usesitecustomize='" + usesitecustomize + "'"
$ WC "usesocks='undef'"
$ WC "usethreads='" + usethreads + "'"
+$ WC "usevendorprefix='" + "'" ! try to say no, though we'll be ignored as of MM 5.90_01
$ WC "usevfork='true'"
+$ WC "usevmsdebug='" + usevmsdebug + "'" ! VMS-specific
$ WC "uvoformat='" + uvoformat + "'"
$ WC "uvsize='" + uvsize + "'"
$ WC "uvtype='" + uvtype + "'"
$ WC "uvuformat='" + uvuformat + "'"
$ WC "uvxformat='" + uvxformat + "'"
$ WC "uvXUformat='" + uvXUformat + "'"
+$ WC "vendorarch='" + "'"
$ WC "vendorarchexp='" + "'"
+$ WC "vendorbin='" + "'"
+$ WC "vendorbinexp='" + "'"
$ WC "vendorlib_stem='" + "'"
+$ WC "vendorlib='" + "'"
$ WC "vendorlibexp='" + "'"
+$ WC "vendorprefix='" + "'"
+$ WC "vendorprefixexp='" + "'"
$ WC "version='" + version + "'"
+$ WC "version_patchlevel_string='" + version_patchlevel_string + "'"
$ WC "vms_cc_type='" + vms_cc_type + "'" ! VMS specific
$ WC "vms_prefix='" + vms_prefix + "'" ! VMS specific
$ WC "vms_ver='" + vms_ver + "'" ! VMS specific
$ WC "voidflags='15'"
-$ WC "xs_apiversion='" + version + "'"
-$ WC "PERL_CONFIG_SH='true'"
+$!
+$! ## The UNIXy POSIXy reentrantey thingys ##
+$! See "Appendix B, Version-Dependency Tables" in the C RTL
+$! manual for when assorted _r functions became available.
+$!
+$ IF use_threads .AND. vms_ver .GES. "7.2"
+$ THEN
+$ WC "asctime_r_proto='REENTRANT_PROTO_B_SB'"
+$ WC "d_asctime_r='define'"
+$ WC "ctime_r_proto='REENTRANT_PROTO_B_SB'"
+$ WC "d_ctime_r='define'"
+$ ELSE
+$ WC "asctime_r_proto='0'"
+$ WC "d_asctime_r='undef'"
+$ WC "ctime_r_proto='0'"
+$ WC "d_ctime_r='undef'"
+$ ENDIF
+$ WC "d_crypt_r='undef'"
+$ WC "d_ctermid_r='undef'"
+$ WC "d_drand48_r='undef'"
+$ WC "d_endgrent_r='undef'"
+$ WC "d_endhostent_r='undef'"
+$ WC "d_endnetent_r='undef'"
+$ WC "d_endprotoent_r='undef'"
+$ WC "d_endpwent_r='undef'"
+$ WC "d_endservent_r='undef'"
+$ WC "d_getgrent_r='undef'"
+$ WC "d_getgrgid_r='" + d_getgrgid_r + "'"
+$ WC "d_getgrnam_r='" + d_getgrnam_r + "'"
+$ WC "d_gethostbyaddr_r='undef'"
+$ WC "d_gethostbyname_r='undef'"
+$ WC "d_gethostent_r='undef'"
+$ WC "d_getlogin_r='undef'"
+$ WC "d_getnetbyaddr_r='undef'"
+$ WC "d_getnetbyname_r='undef'"
+$ WC "d_getnetent_r='undef'"
+$ WC "d_getprotobyname_r='undef'"
+$ WC "d_getprotobynumber_r='undef'"
+$ WC "d_getprotoent_r='undef'"
+$ WC "d_getpwent_r='undef'"
+$ WC "d_getpwnam_r='" + d_getpwnam_r + "'"
+$ WC "d_getpwuid_r='" + d_getpwuid_r + "'"
+$ WC "d_getservbyname_r='undef'"
+$ WC "d_getservbyport_r='undef'"
+$ WC "d_getservent_r='undef'"
+$ WC "d_getspnam_r='undef'"
+$ WC "d_gmtime_r='undef'" ! leave undef'd; we use my_gmtime
+$ WC "d_localtime_r='undef'" ! leave undef'd; we use my_localtime
+$ WC "d_random_r='undef'"
+$ WC "d_readdir_r='define'" ! always defined; we roll our own
+$ WC "d_readdir64_r='undef'"
+$ WC "d_setgrent_r='undef'"
+$ WC "d_sethostent_r='undef'"
+$ WC "d_setlocale_r='undef'"
+$ WC "d_setnetent_r='undef'"
+$ WC "d_setprotoent_r='undef'"
+$ WC "d_setpwent_r='undef'"
+$ WC "d_setservent_r='undef'"
+$ WC "d_srand48_r='undef'"
+$ WC "d_srandom_r='undef'"
+$ WC "d_strerror_r='undef'"
+$ WC "d_tmpnam_r='undef'"
+$ WC "d_ttyname_r='" + d_ttyname_r + "'"
+$ WC "ctermid_r_proto='0'"
+$ WC "crypt_r_proto='0'"
+$ WC "drand48_r_proto='0'"
+$ WC "endgrent_r_proto='0'"
+$ WC "endhostent_r_proto='0'"
+$ WC "endnetent_r_proto='0'"
+$ WC "endprotoent_r_proto='0'"
+$ WC "endpwent_r_proto='0'"
+$ WC "endservent_r_proto='0'"
+$ WC "getgrent_r_proto='0'"
+$ WC "getgrgid_r_proto='" + getgrgid_r_proto + "'"
+$ WC "getgrnam_r_proto='" + getgrnam_r_proto + "'"
+$ WC "gethostbyaddr_r_proto='0'"
+$ WC "gethostbyname_r_proto='0'"
+$ WC "gethostent_r_proto='0'"
+$ WC "getlogin_r_proto='0'"
+$ WC "getnetbyaddr_r_proto='0'"
+$ WC "getnetbyname_r_proto='0'"
+$ WC "getnetent_r_proto='0'"
+$ WC "getprotobyname_r_proto='0'"
+$ WC "getprotobynumber_r_proto='0'"
+$ WC "getprotoent_r_proto='0'"
+$ WC "getpwent_r_proto='0'"
+$ WC "getpwnam_r_proto='0'"
+$ WC "getpwuid_r_proto='0'"
+$ WC "getservbyname_r_proto='0'"
+$ WC "getservbyport_r_proto='0'"
+$ WC "getservent_r_proto='0'"
+$ WC "getspnam_r_proto='0'"
+$ WC "gmtime_r_proto='0'"
+$ WC "localtime_r_proto='0'"
+$ WC "random_r_proto='0'"
+$ WC "readdir_r_proto='REENTRANT_PROTO_I_TSR'" ! always defined; we roll our own
+$ WC "readdir64_r_proto='0'"
+$ WC "setgrent_r_proto='0'"
+$ WC "sethostent_r_proto='0'"
+$ WC "setlocale_r_proto='0'"
+$ WC "setnetent_r_proto='0'"
+$ WC "setprotoent_r_proto='0'"
+$ WC "setpwent_r_proto='0'"
+$ WC "setservent_r_proto='0'"
+$ WC "srand48_r_proto='0'"
+$ WC "srandom_r_proto='0'"
+$ WC "strerror_r_proto='0'"
+$ WC "tmpnam_r_proto='0'"
+$ WC "ttyname_r_proto='" + ttyname_r_proto + "'"
$!
$! ##END WRITE NEW CONSTANTS HERE##
$!
to configure things, answer yes to the following question.
$ EOD
-$ dflt="n"
-$ rp="Do you wish to edit ''basename_config_sh'? [''dflt'] "
+$ bool_dflt="n"
+$ rp="Do you wish to edit ''basename_config_sh'? [''bool_dflt'] "
$ GOSUB myread
-$ IF ans .EQS. "" then ans = dflt
$ IF ans
$ THEN
$ echo4 ""
$! Alas this does not help to build Fcntl
$! WC "#define PERL_IGNORE_FPUSIG SIGFPE"
$ ENDIF
+$ IF kill_by_sigprc .EQS. "define" then WC "#define KILL_BY_SIGPRC"
+$ IF unlink_all_versions .OR. unlink_all_versions .EQS. "define" THEN -
+ WC "#define UNLINK_ALL_VERSIONS"
$ CLOSE CONFIG
$!
$ echo4 "Doing variable substitutions on .SH files..."
$ ! Concatenate them together
$ copy [-]config.local,[-]config.main [-]config.h
$! Clean up
-$ DELETE/NOLOG [-]CONFIG.MAIN;*
-$ DELETE/NOLOG [-]CONFIG.LOCAL;*
-$ DELETE/NOLOG [-]CONFIG.FDL;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.MAIN;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.LOCAL;*
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.FDL;*
$!
$ IF ccname .EQS. "DEC"
$ THEN
$ SOCKET_REPLACE = "SOCKET="
$ ENDIF
$ ENDIF
-$ IF Use_Threads
+$ IF use_threads
$ THEN
$ IF (vms_ver .LES. "6.2")
$ THEN
$ ELSE
$ MALLOC_REPLACE = "MALLOC="
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$! Perl can not use _USE_STD_STAT at the moment
+$! IF d_symlink .or. d_symlink .eqs. "define"
+$! THEN
+$! LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_USE_STD_STAT=1"
+$! ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_LARGEFILE=1"
+$! ENDIF
+$ ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE="
+$ ENDIF
$ echo4 "Extracting ''defmakefile' (with variable substitutions)"
$ DEFINE/USER_MODE sys$output 'UUmakefile'
-$ mcr []munchconfig 'config_sh' 'Makefile_SH' "''DECC_REPLACE'" -
- "''DECCXX_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" "''SOCKET_REPLACE'" -
- "''THREAD_REPLACE'" "''C_Compiler_Replace'" "''MALLOC_REPLACE'" -
- "''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'"
+$ mcr []munchconfig 'config_sh' 'Makefile_SH' "''DECC_REPLACE'" "''DECCXX_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" -
+"''SOCKET_REPLACE'" "''THREAD_REPLACE'" "''C_Compiler_Replace'" "''MALLOC_REPLACE'" -
+"''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'" "''LARGEFILE_REPLACE'"
$! Clean up after ourselves
$ DELETE/NOLOG/NOCONFIRM []munchconfig.exe;
$!
$ On Error Then Continue
$ EndIf
$ If redesc Then -
- miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]"
+ miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]" "PERL_CORE=1"
$ makeutil 'targ'
$ i = i + 1
$ Set Def &def
$ open/read/error=extra_close EXTRA extra.pods
$extra_loop:
$ read/error=extra_close/END_OF_FILE=extra_close EXTRA file
-$ file_type = f$parse(file,,,"TYPE",) - "."
+$ file_type = f$edit(f$parse(file,,,"TYPE",),"LOWERCASE") - "."
$ if file_type .nes. "VMS" .and. file_type .nes. "vms"
$ then
$ pod_file = "[.pod]perl''file_type'.pod"
$ pod_file_rdt = f$cvtime(f$file_attributes(pod_file,"RDT"))
$ if file_rdt .GTS. pod_file_rdt then do_copy := true
$ endif
-$ if do_copy then copy/log/noconfirm 'file' 'pod_file'
+$ ! wacky method to preserve case on ODS-5 even when parse style is traditional
+$ if do_copy then mcr sys$disk:[]miniperl.exe -e "exit 0+$^E unless File::Copy::rmscopy(q{''file'}, q{''pod_file'});"
$ endif
$ endif
$ goto extra_loop
$ ENDSUBROUTINE ! Bad_environment
$ echo ""
$ echo4 "Checking for dangerous pre-existing global symbols and logical names."
-$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "COMP"
+$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "FOO"
$ CALL Bad_environment "LIB"
+$ CALL Bad_environment "LIST"
+$ CALL Bad_environment "MIME"
+$ CALL Bad_environment "POSIX"
+$ CALL Bad_environment "SYS"
$ CALL Bad_environment "T"
-$ CALL Bad_environment "FOO"
-$ CALL Bad_environment "EXT"
-$ CALL Bad_environment "SOME_LOGICAL_NAME_NOT_LIKELY"
-$ CALL Bad_environment "DOWN_LOGICAL_NAME_NOT_LIKELY"
+$ CALL Bad_environment "THREAD"
+$ CALL Bad_environment "THREADS"
+$ CALL Bad_environment "TIME"
+$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "UNICODE"
+$ CALL Bad_environment "UTIL"
$ CALL Bad_environment "TEST" "SYMBOL"
$ IF f$search("config.msg") .eqs. "" THEN echo "OK."
$!
$ echo4 "The perl.cld file is now being written..."
$ OPEN/WRITE CONFIG 'file_2_find'
$ ext = ".exe"
-$ IF (sharedperl .AND. archname .EQS. "VMS_AXP") THEN ext := .AXE
+$ IF (sharedperl .AND. F$EXTRACT(0,7,archname) .EQS. "VMS_AXP") THEN ext := .AXE
+$ IF (sharedperl .AND. F$EXTRACT(0,8,archname) .EQS. "VMS_IA64") THEN ext := .IXE
$ IF (use_vmsdebug_perl)
$ THEN
$ WRITE CONFIG "define verb dbgperl"
$ echo ""
$ echo4 "The perl_setup.com file is now being written..."
$ file_2_find = "[-]perl_setup.com"
-$ OPEN/WRITE CONFIG 'file_2_find'
+$!
+$! Folks are likely to want to edit perl_setup.com.
+$! STMLF RFM plays nicer with ported editors than does VFC.
+$!
+$ CREATE [-]CONFIG.FDL
+$ DECK
+RECORD
+ FORMAT STREAM_LF
+$ EOD
+$ CREATE /FDL=[-]CONFIG.FDL 'file_2_find'
+$ OPEN/APPEND CONFIG 'file_2_find'
+$ DELETE/NOLOG/NOCONFIRM [-]CONFIG.FDL;
$ WRITE CONFIG "$!"
$ WRITE CONFIG "$! Perl_Setup.com ''cf_time'"
$ IF cf_email.NES.perladmin
$ WRITE CONFIG "$! This perl configured & administered by ''perladmin'"
$ ENDIF
$ WRITE CONFIG "$!"
+$! HP hack to make distributing binaries easier
+$!----------------------------------------------
+$ pcsi_producer = f$trnlnm("PCSI_PRODUCER")
+$ if pcsi_producer .eqs. ""
+$ then
+$ prefix = prefix - "000000."
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+$ else
+$ WRITE CONFIG "$ myproc = f$environment(""PROCEDURE"")"
+$ WRITE CONFIG "$ myroot_dev = f$parse(myproc,,,""DEVICE"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = f$parse(myproc,,,""DIRECTORY"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000."" - ""><000000."""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000]"" - ""><000000>"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""]["" - ""><"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - "".]"" - "".>"" - ""["" - ""]"" - ""<"" - "">"""
+$ WRITE CONFIG "$ if f$trnlnm(""HP_BUILD_PERL_BIN_KIT"",""LNM$PROCESS_TABLE"") .EQS. """""
+$ WRITE CONFIG "$ then"
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' 'myroot_dev'['myroot_dir'.]"
+$ WRITE CONFIG "$ endif"
+$ endif
+$
$ prefix = prefix - "000000."
-$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN -
- prefix = prefix - "]" + ".]"
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+
+
$ WRITE CONFIG "$ ext = "".exe"""
$ IF sharedperl
$ THEN
-$ write config "$ if f$getsyi(""HW_MODEL"") .ge. 1024 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 2 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 3 then ext = "".IXE"""
$ ENDIF
$ IF (perl_symbol)
$ THEN
+$ perl_setup_perl = "'" + "'perl'" ! triple quoted foreign command symbol
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgPerl'ext'"
-$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgPerl'ext'"
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgperl'ext'"
+$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgperl'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]Perl'ext'"
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ ELSE ! .NOT.perl_symbol
+$ perl_setup_perl = "perl" ! command verb
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ IF perl_verb .EQS. "PROCESS"
$ THEN
$ WRITE CONFIG "$!"
$ WRITE CONFIG "$! Symbols for commonly used programs:"
$ WRITE CONFIG "$!"
-$ IF (perl_symbol)
-$ THEN
-$ WRITE CONFIG "$ Perldoc == ""'"+"'Perl' ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""'"+"'Perl' pod2text"""
-$ WRITE CONFIG "$ pod2html == ""'"+"'Perl' pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""'"+"'Perl' ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""'"+"'Perl' pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""'"+"'Perl' ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""'"+"'Perl' ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""'"+"'Perl' ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""'"+"'Perl' ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""'"+"'Perl' ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$!perlcc == ""'"+"'Perl' ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ perlivp == ""'"+"'Perl' ''vms_prefix':[utils]perlivp.com"""
-$ WRITE CONFIG "$ splain == ""'"+"'Perl' ''vms_prefix':[utils]splain.com"""
-$ ELSE
-$ WRITE CONFIG "$ Perldoc == ""Perl ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""Perl pod2text"""
-$ WRITE CONFIG "$ pod2html == ""Perl pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""Perl ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""Perl pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""Perl ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""Perl ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""Perl ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""Perl ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""Perl ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$!perlcc == ""Perl ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ perlivp == ""Perl ''vms_prefix':[utils]perlivp.com"""
-$ WRITE CONFIG "$ splain == ""Perl ''vms_prefix':[utils]splain.com"""
-$ ENDIF
+$ WRITE CONFIG "$ c2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]c2ph.com"""
+$ WRITE CONFIG "$ cpan == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan.com"""
+$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
+$ THEN
+$ WRITE CONFIG "$ dprofpp == """ + perl_setup_perl + " ''vms_prefix':[utils]dprofpp.com"""
+$ ENDIF
+$ WRITE CONFIG "$ enc2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]enc2xs.com"""
+$ WRITE CONFIG "$ find2perl == """ + perl_setup_perl + " ''vms_prefix':[utils]find2perl.com"""
+$ WRITE CONFIG "$ h2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]h2ph.com"""
+$ WRITE CONFIG "$ h2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]h2xs.com"""
+$ WRITE CONFIG "$ instmodsh == """ + perl_setup_perl + " ''vms_prefix':[utils]instmodsh.com"""
+$ WRITE CONFIG "$ libnetcfg == """ + perl_setup_perl + " ''vms_prefix':[utils]libnetcfg.com"""
+$ WRITE CONFIG "$ perlbug == """ + perl_setup_perl + " ''vms_prefix':[lib]perlbug.com"""
+$ WRITE CONFIG "$!perlcc == """ + perl_setup_perl + " ''vms_prefix':[utils]perlcc.com"""
+$ WRITE CONFIG "$ perldoc == """ + perl_setup_perl + " ''vms_prefix':[lib.pod]perldoc.com -t"""
+$ WRITE CONFIG "$ perlivp == """ + perl_setup_perl + " ''vms_prefix':[utils]perlivp.com"""
+$ WRITE CONFIG "$ piconv == """ + perl_setup_perl + " ''vms_prefix':[utils]piconv.com"""
+$ WRITE CONFIG "$ pl2pm == """ + perl_setup_perl + " ''vms_prefix':[utils]pl2pm.com"""
+$ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html"""
+$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[lib.pod]pod2latex.com"""
+$ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text"""
+$ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man"""
+$ WRITE CONFIG "$ pod2usage == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2usage.com"""
+$ WRITE CONFIG "$ podchecker == """ + perl_setup_perl + " ''vms_prefix':[utils]podchecker.com"""
+$ WRITE CONFIG "$ podselect == """ + perl_setup_perl + " ''vms_prefix':[utils]podselect.com"""
+$ WRITE CONFIG "$ prove == """ + perl_setup_perl + " ''vms_prefix':[utils]prove.com"""
+$ WRITE CONFIG "$ psed == """ + perl_setup_perl + " ''vms_prefix':[utils]psed.com"""
+$ WRITE CONFIG "$ pstruct == """ + perl_setup_perl + " ''vms_prefix':[utils]pstruct.com"""
+$ WRITE CONFIG "$ s2p == """ + perl_setup_perl + " ''vms_prefix':[utils]s2p.com"""
+$ WRITE CONFIG "$ splain == """ + perl_setup_perl + " ''vms_prefix':[utils]splain.com"""
+$ WRITE CONFIG "$ xsubpp == """ + perl_setup_perl + " ''vms_prefix':[utils]xsubpp.com"""
$ CLOSE CONFIG
$!
$ echo ""
$!
$ IF ( F$SEARCH("config.msg").NES."" )
$ THEN
-$ echo "Hmm. I also noted the following information while running:"
-$ echo ""
-$ type config.msg
+$ echo4 "Hmm. I also noted the following information while running:"
+$ echo4 ""
+$ TYPE/OUTPUT=SYS$ERROR: config.msg
$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) config.msg
$ DELETE/NOLOG/NOCONFIRM config.msg;
$ ENDIF
$!
$Clean_up:
+$ SET NOON
$ IF (silent)
$ THEN
+$ CLOSE/NOLOG STDOUT
$ DEASSIGN SYS$OUTPUT
-$! DEASSIGN SYS$ERROR
$ ENDIF
-$ IF F$GETJPI("","FILCNT").GT.vms_filcnt THEN CLOSE CONFIG
+$ CLOSE/NOLOG CONFIG
$ IF F$GETJPI("","FILCNT").GT.vms_filcnt
$ THEN WRITE SYS$ERROR "%Config-W-VMS, WARNING: There is a file still open"
$ ENDIF
https://perl5.git.perl.org / perl5.git / blobdiff