$ cat = "type"
$ delete := delete ! local symbol overrides globals with qualifiers
$ gcc_symbol = "gcc"
-$ ld = "Link"
+$ ld = "Link/nodebug"
$ ans = ""
$ macros = ""
$ extra_flags = ""
$ user_c_flags = ""
$ use_ieee_math = "y"
$ be_case_sensitive = "n"
+$ shorten_long_symbols = "y"
+$ unlink_all_versions = "n"
+$ builder = "MMK"
$ use_vmsdebug_perl = "n"
$ use64bitall = "n"
$ use64bitint = "n"
+$ uselongdouble = "n"
+$ uselargefiles = "y"
+$ usestdstat = "n"
+$ usesitecustomize = "n"
$ C_Compiler_Replace = "CC="
-$ Thread_Live_Dangerously = "MT="
+$ thread_upcalls = "MTU="
+$ thread_kernel = "MTK="
$ use_two_pot_malloc = "N"
$ use_pack_malloc = "N"
$ use_debugmalloc = "N"
$ ccflags = ""
$ static_ext = ""
+$ dynamic_ext = ""
+$ nonxs_ext = ""
+$ nonxs_ext2 = ""
$ vms_default_directory_name = F$ENVIRONMENT("DEFAULT")
$ max_allowed_dir_depth = 3 ! e.g. [A.B.PERLxxx] not [A.B.C.PERLxxx]
$! max_allowed_dir_depth = 2 ! e.g. [A.PERLxxx] not [A.B.PERLxxx]
$Shut_up:
$ IF F$Mode() .eqs. "BATCH"
$ THEN
-$ STDOUT = F$PARSE(F$GETQUI("DISPLAY_ENTRY", "JOB_NAME"), -
- F$GETQUI("DISPLAY_ENTRY", "LOG_SPECIFICATION"), ".LOG")
-$ WRITE SYS$OUTPUT "Warning: Executing in batch mode. To avoid file locking conflicts,"
-$ WRITE SYS$OUTPUT "output intended for SYS$OUTPUT will be sent to a new version"
+$ x = F$GETQUI("CANCEL_OPERATION") ! clear the deck
+$ x = "THIS_JOB"
+$ bproc_queue = f$getqui("DISPLAY_QUEUE","QUEUE_NAME","*",x)
+$ bproc_entry = f$getqui("DISPLAY_JOB","ENTRY_NUMBER",,x)
+$ bproc_name = f$getqui("DISPLAY_JOB","JOB_NAME",,x)
+$ bproc_log_spec = f$getqui("DISPLAY_JOB","LOG_SPECIFICATION",,x)
+$ STDOUT = F$PARSE(bproc_name, bproc_log_spec, ".LOG")
+$ WRITE SYS$OUTPUT "Writing output of entry ''bproc_entry' in queue ''bproc_queue' to a new version of: "
$ WRITE SYS$OUTPUT STDOUT
+$ DELETE_/SYMBOL x
+$ DELETE_/SYMBOL bproc_queue
+$ DELETE_/SYMBOL bproc_entry
+$ DELETE_/SYMBOL bproc_name
+$ DELETE_/SYMBOL bproc_log_spec
$ ELSE
$ STDOUT = F$TRNLNM("SYS$OUTPUT")
$ ENDIF
$ THEN
$ CREATE/DIRECTORY [.UU]
$ ELSE
+$ IF ( F$SEARCH("[.UU.CXX_REPOSITORY]*.*").NES."" )
+$ THEN
+$ DELETE/NOLOG/NOCONFIRM [.UU.CXX_REPOSITORY]*.*;*
+$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) [.UU]CXX_REPOSITORY.DIR
+$ ENDIF
$ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM [.UU]*.*;*
$ ENDIF
$!: Configure runs within the UU subdirectory
$ file_2_find = "[-]" + file_2_find
$ ENDIF
$!
+$ tmp = F$PARSE(file_2_find + ";",,,,"SYNTAX_ONLY")
+$ IF F$SEARCH(tmp) .NES. "" THEN file_2_find = tmp
$ dirname = F$EXTRACT(0,F$LOCATE("]",file_2_find),file_2_find) + "]"
$ file_2_find = file_2_find - dirname
$!
$! 17-DEC-1999 Improved to turn "[.foo.bar]baz.c_buz" into
$! "[.foo.bar]baz_c.buz" to cover unzipped archives and put
$! "[.foo.bar]baz.c_buz,baz_c.buz" into missing list if neither is found.
-$ basename[f$locate(".",basename),1] := _
-$ dot_ele = F$ELEMENT(dots - 1,"_",basename)
+$ dotloc = f$locate(".",basename)
+$ basename[dotloc,1] := "_"
+$ dot_ele = F$ELEMENT(dots - 1,"_",f$extract(dotloc,f$length(basename),basename))
$ basename = -
f$extract(0,f$length(basename)-(f$length(dot_ele)+1),basename) -
+ "." + dot_ele
$ found = F$SEARCH(dirname + basename)
$ file_2_find = file_2_find + "," + basename
$ ENDIF
+$ tildeloc = f$locate("~",basename)
+$ IF (found .EQS. "" .AND. tildeloc .LT. f$length(basename))
+$ THEN
+$ basename[tildeloc,1] := "_"
+$ found = F$SEARCH(dirname + basename)
+$ file_2_find = file_2_find + "," + basename
+$ ENDIF
$ IF (found .EQS. "")
$ THEN
$ WRITE MISSING file_2_find
brackets; typing carriage return will give you the default.
$ EOD
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
$ DECK
options.
$ EOD
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ TYPE SYS$INPUT:
$ DECK
$!If you make a mistake on a question, there is no easy way to back up to it
$!currently.
$!
-$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ if (fastread)
+$ then
+$ echo4 ""
+$ else
+$ READ SYS$COMMAND/PROMPT="Type carriage return to continue " ans
+$ endif
$ IF (F$SEARCH("[-.CONFIG]INSTRUCT.").EQS."")
$ THEN
$ OPEN/WRITE CONFIG [-.CONFIG]INSTRUCT.
$ ENDIF !(needman .EQS. "true")
$!
$!: see if sh knows # comments !sfn
-$ sharpbang = "$ "
$!: figure out how to guarantee sh startup !sfn
$!: find out where common programs are !sfn
$!loclist="awk/cat/comm/cp/echo/expr/find/grep/ln/ls/mkdir/rm/sed/sort/touch/tr/uniq"
$! echo "Go find a public domain implementation or fix your PATH setting!"
$! echo ""
$! echo "Don't worry if any of the following aren't found..."
-$!: determine whether symbolic links are supported !sfn
+$!: determine whether symbolic links are supported !sfn !jem- further down
$!: see whether [:lower:] and [:upper:] are supported character classes !sfn
$!: set up the translation script tr, must be called with ./tr of course !sfn
$!
$!: Try to determine whether config.sh was made on this system
$!: Get old answers from old config file if Configure was run on the
$!: same system, otherwise use the hints.
-$ config_sh_es = "''config_sh'/[-]config.sh/[-.vms]config.vms/"
+$ config_sh_es = "''config_sh'/[-]config.sh/"
$ i = 0
$ max = 3
$Config_sh_look:
$ IF (configshfound.NES."") THEN GOTO Config_sh_found
$ ENDIF
$ IF (i.LT.max) THEN GOTO Config_sh_look
-$! genconfig.pl has "osname='VMS'"
$ osname = F$EDIT(F$GETSYI("NODE_SWTYPE"),"COLLAPSE")
$ IF (configshfound.EQS."")
$ THEN
$ config_symbols0 ="|archlib|archlibexp|bin|binexp|builddir|cf_email|config_sh|installarchlib|installbin|installman1dir|installman3dir|"
$ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|"
$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|"
-$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|usemultiplicity|usemymalloc|usedebugging_perl|useperlio|usesecurelog|"
-$ config_symbols4 ="|usethreads|usevmsdebug|"
+$ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|uselongdouble|usemultiplicity|usemymalloc|usedebugging_perl|"
+$ config_symbols4 ="|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|"
+$ config_symbols5 ="|buildmake|builder|usethreadupcalls|usekernelthreads|useshortenedsymbols"
$!
$ open/read CONFIG 'config_sh'
$ rd_conf_loop:
$ j = f$locate(dsym, syms)
$ if j .lt. f$length(syms) then goto erd_ck_loop
$ k = k + 1
-$ if k .lt. 5 then goto rd_ck_loop
+$ if k .lt. 6 then goto rd_ck_loop
$ goto rd_conf_loop
$ erd_ck_loop:
$ val = f$element(1,"=",line)
$ delete/symbol config_symbols2
$ delete/symbol config_symbols3
$ delete/symbol config_symbols4
+$ delete/symbol config_symbols5
$ delete/symbol sym
$ delete/symbol val
$ delete/symbol dsym
$ if f$type(usedebugging_perl) .nes. ""
$ then
-$ useperldebug = usedebugging_perl
+$ DEBUGGING = usedebugging_perl
$ delete/symbol usedebugging_perl
$ endif
$!
$! EOD
$! echo " ","VMS_VAX"
$! echo " ","VMS_AXP"
+$! echo " ","VMS_IA64"
$! : Now look for a hint file osname_osvers, unless one has been
$! : specified already.
$! TYPE SYS$INPUT:
$ tz = f$fao("UTC!AS!UL:!2ZL",signothetime,tzhour,tzminrem)
$ cf_time = "''wkday' ''mon' ''mday' ''hour':''min':''sec' ''tz' ''year'"
$!
-$!: determine the architecture name
-$! genconfig.pl has either archname='VMS_AXP' or 'VMS_VAX'
-$! Note that DCL in VMS V5.4 does not have F$GETSYI("ARCH_NAME")
-$! but does have F$GETSYI("HW_MODEL").
-$! Please try to use either archname .EQS. "VMS_VAX" or archname .EQS.
-$! "VMS_AXP" from here on to allow cross-platform configuration (e.g.
+$! This quotation from Configure has to be included on VMS:
+$!
+$ TYPE SYS$INPUT:
+$ DECK
+
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+$ EOD
+$!
+$! Determine the architecture name. For now we just get the base
+$! architecture name, which may accumulate various minus sign-delimited
+$! appendages later depending on configuration options. But we need the
+$! base name early because not all questions are worth asking on all
+$! platforms.
+$!
+$! Please use F$ELEMENT(0,"-",archname) .EQS. "VMS_VAX" (or "VMS_AXP" or
+$! "VMS_IA64") from here on to allow cross-platform configuration (e.g.
$! configure a VAX build on an Alpha).
$!
-$ IF (F$GETSYI("HW_MODEL") .LT. 1024)
+$ IF (F$GETSYI("HW_MODEL") .LT. 1024 .AND. F$GETSYI("HW_MODEL") .GT. 0)
$ THEN
$ archname = "VMS_VAX"
-$ otherarch = "an Alpha"
+$ otherarch = "an Alpha or IA64"
$ alignbytes="8"
$ arch_type = "ARCH-TYPE=__VAX__"
$ ELSE
-$ archname = "VMS_AXP"
-$ otherarch = "a VAX"
-$ alignbytes="8"
-$ arch_type = "ARCH-TYPE=__AXP__"
-$ ENDIF
-$ dflt = archname
-$ rp = "What is your architecture name? [''archname'] "
-$ GOSUB myread
-$ IF ans.NES.""
-$ THEN
-$ ans = F$EDIT(ans,"COLLAPSE, UPCASE")
-$ IF (ans.NES.archname) !.AND.knowitall
-$ THEN
-$ echo4 "I'll go with ''archname' anyway..."
-$ ENDIF
-$ ENDIF
-$ bool_dflt = "n"
-$ vms_prefix = "perl_root"
-$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE")
-$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] "
-$ GOSUB myread
-$ IF .NOT. ans
-$ THEN
-$ sharedperl = "N"
-$ ELSE
-$ sharedperl = "Y"
-$ IF (archname.EQS."VMS_AXP")
-$ THEN
-$ macros = macros + """AXE=1"","
-$ ENDIF
-$ ENDIF
-$!
-$!: is AFS running? !sfn
-$!: decide how portable to be. Allow command line overrides. !sfn
-$!: set up shell script to do ~ expansion !sfn
-$!: expand filename !sfn
-$!: now set up to get a file name !sfn
-$!
-$ IF F$TYPE(prefix) .EQS. ""
-$ THEN
-$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]"
-$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;"
-$ prefixbase = prefix - "]"
-$! Add _ROOT to make install PERL_ROOT differ from build directory.
-$ prefix = prefixbase + "_ROOT.]"
-$ ENDIF
-$ src = prefix
-$!: determine root of directory hierarchy where package will be installed.
-$ dflt = prefix
-$ IF .NOT.silent
-$ THEN
-$ echo ""
-$ echo "By default, ''package' will be installed in ''dflt', pod"
-$ echo "pages under ''prefixbase'.LIB.POD], etc..., i.e. with ''dflt' as prefix for"
-$ echo "all installation directories."
-$ echo "On ''osname' the prefix is used to DEFINE the ''vms_prefixup' prior to installation"
-$ echo "as well as during subsequent use of ''package' via ''packageup'_SETUP.COM."
-$ ENDIF
-$ rp = "Installation prefix to use (for ''vms_prefixup')? [ ''dflt' ] "
-$ GOSUB myread
-$ IF ans.NES.""
-$ THEN
-$ prefix = ans
-$ IF F$LOCATE(".]",ans) .EQ. F$LENGTH(ans) THEN prefix = prefix - "]" + ".]"
-$ ELSE
-$ prefix = dflt
-$ ENDIF
-$ perl_root = prefix
-$!
-$! Check here for pre-existing PERL_ROOT.
-$! -> ask if removal desired.
-$! Check here for writability of requested PERL_ROOT if it is not the default (cwd).
-$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable.
-$!
-$ tmp = perl_root - ".]" + "]"
-$ dflt = f$parse(tmp,,,,)
-$ IF dflt .eqs. ""
+$ IF (F$GETSYI("ARCH_TYPE") .EQ. 2)
$ THEN
-$ echo4 "''tmp' does not yet exist."
-$! create/directory 'tmp'
+$ archname = "VMS_AXP"
+$ otherarch = "a VAX or IA64"
+$ arch_type = "ARCH-TYPE=__AXP__"
$ ELSE
-$ echo4 "''tmp' already exists."
-$ ENDIF
-$!
-$ vms_skip_install = "true"
-$ bool_dflt = "y"
-$! echo ""
-$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] "
-$ GOSUB myread
-$ IF (.NOT.ans) THEN vms_skip_install = "false"
-$ IF (.NOT.vms_skip_install)
-$ THEN
-$!
-$!: set the prefixit variable, to compute a suitable default value
-$!
-$!: determine where private library files go
-$!: Usual default is /usr/local/lib/perl5. Also allow things like
-$!: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
-$ IF .NOT.silent
-$ THEN
-$ TYPE SYS$INPUT:
-$ DECK
-
-There are some auxiliary files for perl5 that need to be put into a
-private library directory that is accessible by everyone.
-$ EOD
+$ archname = "VMS_IA64"
+$ otherarch = "a VAX or Alpha"
+$ arch_type = "ARCH-TYPE=__IA64__"
$ ENDIF
-$ IF F$TYPE(privlib) .NES. ""
-$ THEN dflt = privlib
-$ ELSE dflt = "''vms_prefix':[lib]"
-$ ENDIF
-$ rp = "Pathname where the private library files will reside? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ privlib = ans
-$!
-$ ENDIF !%Config-I-VMS, skip remaining "where install" questions
-$!
-$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true
-$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = ""
-$ IF perl_symbol
-$ THEN bool_dflt = "y"
-$ ELSE bool_dflt = "n"
-$ ENDIF
-$ IF .NOT.silent
-$ THEN
-$ echo ""
-$ echo "You may choose to write ''packageup'_SETUP.COM to assign a foreign"
-$ echo "symbol to invoke ''package', which is the usual method."
-$ echO "If you do not do so then you would need a DCL command verb at the"
-$ echo "process or the system wide level."
+$ alignbytes="8"
$ ENDIF
-$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] "
-$ GOSUB myread
-$ IF (.NOT.ans) THEN perl_symbol = "false"
-$!
-$ IF (.NOT.perl_symbol)
-$ THEN
-$ IF perl_verb .EQS. "DCLTABLES"
-$ THEN bool_dflt = "n"
-$ ELSE bool_dflt = "y"
-$ ENDIF
-$ IF .NOT.silent
-$ THEN
-$ echo ""
-$ echo "Since you won't be using a symbol you must choose to put the ''packageup'"
-$ echo "verb in a per-process table or in the system wide DCLTABLES (which"
-$ echo "would require write privilege)."
-$ ENDIF
-$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] "
-$ GOSUB myread
-$ IF (.NOT.ans)
-$ THEN perl_verb = "DCLTABLES"
-$ ELSE perl_verb = "PROCESS"
-$ ENDIF
-$ ENDIF ! (.NOT.perl_symbol)
$!
$!: set the base revision
$ baserev="5.0"
$ perl_patchlevel = perl_patchlevel - "DEVEL"
$ got_perl_patchlevel = "true"
$ ENDIF
+$ IF ((F$LOCATE("""SMOKE",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "SMOKE"
+$ got_perl_patchlevel = "true"
+$ ENDIF
+$ IF ((F$LOCATE("""MAINT",line).NE.F$LENGTH(line)).AND.(.NOT.got_perl_patchlevel))
+$ THEN
+$ line = F$EDIT(line,"COMPRESS, TRIM")
+$ perl_patchlevel = F$ELEMENT(1,"""",line)
+$ perl_patchlevel = perl_patchlevel - "MAINT"
+$ got_perl_patchlevel = "true"
+$ ENDIF
$ IF (.NOT. got_patch) .OR. -
(.NOT. got_sub) .OR. -
(.NOT. got_api_revision) .OR. -
$Close_patch:
$ CLOSE CONFIG
$ ENDIF
+$!
+$ IF F$SEARCH("[-].patch") .NES. ""
+$ THEN
+$ SET NOON
+$ OPEN/READ PATCH [-].patch
+$ READ PATCH line
+$ CLOSE PATCH
+$ tmp = F$EDIT(line,"TRIM,COMPRESS")
+$ IF F$ELEMENT(3, " ", tmp) .NES. "" THEN tmp = F$ELEMENT(3, " ", tmp)
+$ SET ON
+$ IF tmp .NES. "" THEN perl_patchlevel = tmp
+$ ENDIF
+$!
$ version_patchlevel_string = "version ''patchlevel' subversion ''subversion'"
$ IF got_perl_patchlevel .AND. perl_patchlevel .NES. "0"
$ THEN
$!
$ version = revision + "_" + patchlevel + "_" + subversion
$!
-$ IF (.NOT.vms_skip_install)
-$ THEN
-$!: set the prefixup variable, to restore leading tilde escape !sfn
+$!: see if we need a special compiler
+$! cc_list = "cc/decc|gcc" !%Config-I-VMS, compiler symbols/commands
$!
-$!: determine where public architecture dependent libraries go
-$ IF (.NOT.silent)
-$ THEN
-$ echo ""
-$ echo "''package' contains architecture-dependent library files. If you are"
-$ ENDIF
-$ IF (.NOT.silent)
-$ THEN
-$ TYPE SYS$INPUT:
-$ DECK
-sharing libraries in a heterogeneous environment, you might store
-these files in a separate location. Otherwise, you can just include
-them with the rest of the public library files.
-$ EOD
-$ ENDIF
-$ IF F$TYPE(archlib) .NES. ""
-$ THEN dflt = archlib
-$ ELSE dflt = privlib - "]" + "." + archname + "." + version + "]"
-$ ENDIF
-$ rp = "Where do you want to put the public architecture-dependent libraries? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ archlib = ans
+$ nocc = "f"
+$ vms_cc_dflt = ""
+$ vms_cc_available = ""
$!
-$ ENDIF !%Config-I-VMS, skip "where install" questions
+$ OPEN/WRITE CONFIG ccvms.c
+$ WRITE CONFIG "#ifdef __DECC"
+$ WRITE CONFIG "#include <stdlib.h>" !DECC is sooo picky
+$ WRITE CONFIG "#endif"
+$ WRITE CONFIG "#include <stdio.h>"
+$ WRITE CONFIG "int main() {"
+$ WRITE CONFIG "#ifdef __DECC"
+$ WRITE CONFIG " printf(""/DECC\n"");"
+$ WRITE CONFIG "#else"
+$ WRITE CONFIG " printf(""/VAXC\n"");"
+$ WRITE CONFIG "#endif"
+$ WRITE CONFIG " exit(0);"
+$ WRITE CONFIG "}"
+$ CLOSE CONFIG
$!
-$! This quotation from Configure has to be included on VMS:
-$!
-$ TYPE SYS$INPUT:
-$ DECK
-
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-$ EOD
-$ IF (.NOT.vms_skip_install)
-$ THEN
-$!: it so happens the Eunice I know will not run shell scripts in Unix format
-$!
-$!: see if setuid scripts can be secure !sfn
-$!: now see if they want to do setuid emulation !sfn
-$!
-$!: determine where site specific libraries go.
-$ IF .NOT.silent
-$ THEN
-$ TYPE SYS$INPUT:
-$ DECK
-
-The installation process will also create a directory for
-site-specific extensions and modules. Some users find it convenient
-to place all local files in this directory rather than in the main
-distribution directory.
-$ EOD
-$ ENDIF
-$ IF F$TYPE(sitelib) .NES. ""
-$ THEN dflt = sitelib
-$ ELSE dflt = privlib - "]" + ".SITE_PERL]"
-$ ENDIF
-$ rp = "Pathname for the site-specific library files? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ sitelib = ans
-$!
-$!: determine where site specific architecture-dependent libraries go.
-$ IF .NOT.silent
-$ THEN TYPE SYS$INPUT:
-$ DECK
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-$ EOD
-$ ENDIF
-$ IF F$TYPE(sitearch) .NES. ""
-$ THEN dflt = sitearch
-$ ELSE dflt = sitelib - "]" + "." + archname + "]"
-$ ENDIF
-$ rp = "Pathname for the site-specific architecture-dependent library files? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ sitearch = ans
-$!
-$!: determine where old public architecture dependent libraries might be
-$!
-$!: determine where public executables go
-$ IF F$TYPE(bin) .NES. ""
-$ THEN dflt = bin
-$! ELSE dflt = prefix - ".]" + ".BIN]"
-$ ELSE dflt = "/''vms_prefix'/000000"
-$ ENDIF
-$ rp = "Pathname where the public executables will reside? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ bin = ans
-$!
-$!: determine where add-on public executables go
-$ IF F$TYPE(sitebin) .NES. ""
-$ THEN dflt = sitebin
-$ ELSE dflt = "''vms_prefix':[bin.''archname']"
-$ ENDIF
-$ rp = "Pathname where the add-on public executables should be installed? "
-$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
-$ GOSUB myread
-$ sitebin = ans
-$!
-$!: determine where manual pages are on this system
-$!: What suffix to use on installed man pages
-$!: see if we can have long filenames
-$!: determine where library module manual pages go
-$!: What suffix to use on installed man pages
-$!: see what memory models we can support
-$!
-$ ELSE ! skipping "where install" questions, we must set some symbols
-$ IF F$TYPE(archlib).EQS."" THEN -
- archlib="''vms_prefix':[lib.''archname'.''version']"
-$ IF F$TYPE(bin) .EQS. "" THEN -
- bin="/''vms_prefix'/000000"
-$ IF F$TYPE(privlib) .EQS. "" THEN -
- privlib ="''vms_prefix':[lib]"
-$ IF F$TYPE(sitearch) .EQS. "" THEN -
- sitearch="''vms_prefix':[lib.site_perl.''archname']"
-$ IF F$TYPE(sitelib) .EQS. "" THEN -
- sitelib ="''vms_prefix':[lib.site_perl]"
-$ IF F$TYPE(sitebin) .EQS. "" THEN -
- sitebin="''vms_prefix':[bin.''archname']"
-$ ENDIF !%Config-I-VMS, skip "where install" questions
-$!
-$! These derived locations can be set whether we've opted to
-$! skip the where install questions or not.
-$!
-$ IF F$TYPE(archlibexp) .EQS. "" THEN -
- archlibexp="''vms_prefix':[lib.''archname'.''version']"
-$ IF F$TYPE(binexp) .EQS. "" THEN -
- binexp ="''vms_prefix':[000000]"
-$ IF F$TYPE(builddir) .EQS. "" THEN -
- builddir ="''vms_prefix':[000000]"
-$ IF F$TYPE(installarchlib) .EQS. "" THEN -
- installarchlib="''vms_prefix':[lib.''archname'.''version']"
-$ IF F$TYPE(installbin) .EQS. "" THEN -
- installbin ="''vms_prefix':[000000]"
-$ IF F$TYPE(installscript) .EQS. "" THEN -
- installscript ="''vms_prefix':[utils]"
-$ IF F$TYPE(installman1dir) .EQS. "" THEN -
- installman1dir ="''vms_prefix':[man.man1]"
-$ IF F$TYPE(installman3dir) .EQS. "" THEN -
- installman3dir ="''vms_prefix':[man.man3]"
-$ IF F$TYPE(installprivlib) .EQS. "" THEN -
- installprivlib ="''vms_prefix':[lib]"
-$ IF F$TYPE(installsitearch) .EQS. "" THEN -
- installsitearch="''vms_prefix':[lib.site_perl.''archname']"
-$ IF F$TYPE(installsitelib) .EQS. "" THEN -
- installsitelib ="''vms_prefix':[lib.site_perl]"
-$ IF F$TYPE(oldarchlib) .EQS. "" THEN -
- oldarchlib="''vms_prefix':[lib.''archname']"
-$ IF F$TYPE(oldarchlibexp) .EQS. "" THEN -
- oldarchlibexp="''vms_prefix':[lib.''archname']"
-$ IF F$TYPE(privlibexp) .EQS. "" THEN -
- privlibexp ="''vms_prefix':[lib]"
-$ IF F$TYPE(scriptdir) .EQS. "" THEN -
- scriptdir ="''vms_prefix':[utils]"
-$ IF F$TYPE(sitearchexp) .EQS. "" THEN -
- sitearchexp ="''vms_prefix':[lib.site_perl.''archname']"
-$ IF F$TYPE(sitelib_stem) .EQS. "" THEN -
- sitelib_stem ="''vms_prefix':[lib.site_perl]"
-$ IF F$TYPE(sitelibexp) .EQS. "" THEN -
- sitelibexp ="''vms_prefix':[lib.site_perl]"
-$!
-$!: see if we need a special compiler
-$! cc_list = "cc/decc|gcc" !%Config-I-VMS, compiler symbols/commands
-$!
-$ nocc = "f"
-$ vms_cc_dflt = ""
-$ vms_cc_available = ""
-$!
-$ OPEN/WRITE CONFIG ccvms.c
-$ WRITE CONFIG "#ifdef __DECC"
-$ WRITE CONFIG "#include <stdlib.h>" !DECC is sooo picky
-$ WRITE CONFIG "#endif"
-$ WRITE CONFIG "#include <stdio.h>"
-$ WRITE CONFIG "int main() {"
-$ WRITE CONFIG "#ifdef __DECC"
-$ WRITE CONFIG " printf(""/DECC\n"");"
-$ WRITE CONFIG "#else"
-$ WRITE CONFIG " printf(""/VAXC\n"");"
-$ WRITE CONFIG "#endif"
-$ WRITE CONFIG " exit(0);"
-$ WRITE CONFIG "}"
-$ CLOSE CONFIG
-$!
-$! DEFINE SYS$ERROR _NLA0:
-$! DEFINE SYS$OUTPUT _NLA0:
-$ cc/NoObj/list=ccvms.lis ccvms.c
-$ tmp = $status
-$! DEASSIGN SYS$OUTPUT
-$! DEASSIGN SYS$ERROR
-$ IF (silent) THEN GOSUB Shut_up
-$ IF tmp.NE.%X10B90001
-$ THEN
-$ IF tmp.NE.%X10000001
-$ THEN
-$ nocc = "t" !%X10000001 is return from gcc
-$ GOTO Gcc_initial_check
-$ ENDIF
-$ ENDIF
+$ SET NOON
+$ DEFINE/USER_MODE SYS$ERROR _NLA0:
+$ DEFINE/USER_MODE SYS$OUTPUT _NLA0:
+$ cc/NoObj/list=ccvms.lis ccvms.c
+$ tmp = $status
+$ SET ON
+$ IF (silent) THEN GOSUB Shut_up
+$ IF tmp.NE.%X10B90001
+$ THEN
+$ IF tmp.NE.%X10000001
+$ THEN
+$ nocc = "t" !%X10000001 is return from gcc
+$ GOTO Gcc_initial_check
+$ ENDIF
+$ ENDIF
$!
$ GOSUB List_Parse
$ IF .NOT.silent THEN echo ""
$ THEN
$ echo "Will try cc/decc..."
$ ENDIF
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ SET NOON
$ cc/decc/NoObj/list=ccvms.lis ccvms.c
$ tmp = $status
$ SET ON
$ vms_cc_available = vms_cc_available + "cc/decc "
$ ENDIF
$ ELSE
-$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line))
+$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line)) -
+ .or.(F$LOCATE("HP",F$EDIT(line,"UPCASE")).NE.F$LENGTH(line))
$ THEN
$ vms_cc_dflt = "/decc"
$ vms_cc_available = vms_cc_available + "cc/decc "
$Gcc_initial_check:
$ echo "Checking for gcc"
$ OPEN/WRITE CONFIG gccvers.lis
+$ SET NOON
$ DEFINE/USER_MODE SYS$ERROR CONFIG
$ DEFINE/USER_MODE SYS$OUTPUT CONFIG
$ 'gcc_symbol'/noobj/version _nla0:
$ tmp = $status
+$ SET ON
$ IF (silent) THEN GOSUB Shut_up
$ CLOSE CONFIG
$ IF (tmp.NE.%X10000001).and.(tmp.ne.%X00030001)
$ SET NOON
$ DEFINE/USER_MODE SYS$OUTPUT NL:
$ DEFINE/USER_MODE SYS$ERROR NL:
-$ link ccvms.obj
+$ link/nodebug ccvms.obj
$ tmp = $status
$ SET ON
$ ! success $status with:
$ THEN
$ ans = F$EDIT(ans,"TRIM, COMPRESS, LOWERCASE")
$ Mcc = ans
-$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans))
+$ IF (F$LOCATE("dec",ans).NE.F$LENGTH(ans)).or.(F$LOCATE("compaq",ans).NE.F$LENGTH(ans)) -
+ .or.(F$LOCATE("hp",ans).NE.F$LENGTH(ans))
$ THEN
$ Mcc = "cc/decc"
$! CPQ ?
$ IF (silent) THEN GOSUB Shut_up
$ DEFINE/USER_MODE SYS$ERROR NL:
$ DEFINE/USER_MODE SYS$OUTPUT NL:
-$ link deccvers.obj
+$ link/nodebug deccvers.obj
$ tmp = $status
$ IF (silent) THEN GOSUB Shut_up
$ OPEN/WRITE CONFIG deccvers.out
$ echo "You are using Dec C ''line'"
$ ccversion = line
$ Dec_C_Version = F$INTEGER(line)
-$ IF Dec_C_Version .GE. 60200000 .AND. archname .NES. "VMS_VAX"
+$ IF Dec_C_Version .GE. 60200000 .AND. F$ELEMENT(0, "-", archname) .NES. "VMS_VAX"
$ THEN
$ echo4 "adding /NOANSI_ALIAS qualifier to ccflags."
$ ccflags = ccflags + "/NOANSI_ALIAS"
$ THEN
$ IF F$LOCATE("VAXCRTL",gcclib_olb).NE.F$LENGTH(gcclib_olb)
$ THEN
-$ link gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
+$ link/nodebug gccvers.obj,'gcclib_olb',SYS$LIBRARY:VAXCRTL/Library
$ tmp = $status
$ ELSE
-$ link gccvers.obj,'gcclib_olb'
+$ link/nodebug gccvers.obj,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ ELSE
$ OPEN/WRITE CONFIG GCCVERS.OPT
$ WRITE CONFIG "SYS$SHARE:VAXCRTL/SHARE"
$ CLOSE CONFIG
-$ link gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
+$ link/nodebug gccvers.obj,GCCVERS.OPT/OPT,'gcclib_olb'
$ tmp = $status
$ ENDIF
$ DEASSIGN SYS$ERROR
$ echo "You are using CXX ''line'"
$ cxxversion = line
$ ccversion = line
+$ d_cplusplus = "define"
$ CALL Cxx_demangler_cleanup
+$ ELSE
+$ d_cplusplus = "undef"
$ ENDIF
$!
$Cxx_demangler_cleanup: SUBROUTINE
$List_Parse:
$ OPEN/READ CONFIG ccvms.lis
$ READ CONFIG line
-$ IF archname .EQS. "VMS_VAX"
+$ IF F$ELEMENT(0, "-", archname) .EQS. "VMS_VAX"
$ THEN
$ read CONFIG line
$ archsufx = "VAX"
$ ELSE
-$ archsufx = "AXP"
+$ IF F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP"
+$ THEN
+$ archsufx = "AXP"
+$ ELSE
+$ archsufx = "IA64"
+$ ENDIF
$ ENDIF
$ CLOSE CONFIG
$ line = F$EDIT(line,"TRIM,COMPRESS")
$!: What should the include directory be ? (.TLB text libraries)
$ dflt = gcclib_olb
$ rp = "Where are the include files you want to use? "
-$ IF f$length( rp + "[''dflt'] " ).gt.76
+$ IF f$length( rp + "[''dflt'] " ) .GT. 76
$ THEN rp = F$FAO("!AS!/!AS",rp,"[''dflt'] ")
$ ELSE rp = rp + "[''dflt'] "
$ ENDIF
$!: see if nm is to be used to determine whether a symbol is defined or not
$!: get list of predefined functions in a handy place
$!: see if we have sigaction or sigprocmask
-$!: see whether socketshr exists
-$ IF (F$SEARCH(F$PARSE("SocketShr","Sys$Share:.Exe")).NES."")
-$ THEN
-$ Has_socketshr = "T"
-$ echo ""
-$ echo4 "Hmm... Looks like you have SOCKETSHR Berkeley networking support."
-$ ELSE
-$ Has_socketshr = "F"
-$ ENDIF
$ IF (ccname .EQS. "DEC" .AND. Dec_C_Version .GE. 50200000) .OR. (ccname .EQS. "CXX")
$ THEN
$ Has_Dec_C_Sockets = "T"
$ ELSE
$ Has_Dec_C_Sockets = "F"
$ ENDIF
-$ ! Hey, we've got both. Default to Dec C, then, since it's better
-$ IF Has_socketshr .OR. Has_Dec_C_Sockets
+$!
+$ IF Has_Dec_C_Sockets
$ THEN
$ echo ""
-$ echo "You have sockets available. Which socket stack do you want to"
-$ echo "build into Perl?"
-$ IF Has_Dec_C_Sockets
-$ THEN
-$ dflt = "DECC"
-$ ELSE
-$ dflt = "SOCKETSHR"
-$ ENDIF
-$ rp = "Choose socket stack (NONE"
-$ IF Has_socketshr THEN rp = rp + ",SOCKETSHR"
+$ echo "You have sockets available via the C library. Should socket support"
+$ echo "be built into Perl?"
+$ dflt = "DECC"
+$ rp = "Choose socket support option (NONE"
$ IF Has_Dec_C_Sockets THEN rp = rp + ",DECC"
$ rp = rp + ") [''dflt'] "
$ GOSUB myread
$ Has_socketshr = "F"
$ ans = F$EDIT(ans,"TRIM,COMPRESS,LOWERCASE")
$ IF ans.eqs."decc" THEN Has_Dec_C_Sockets = "T"
-$ IF ans.eqs."socketshr" THEN Has_socketshr = "T"
$ ENDIF
$!
$!
$ echo "was mandatory on perl 5.005 and before on VMS, but is now"
$ echo "optional. If you do not generally use it you should probably"
$ echo "leave this off and gain a bit of extra speed."
-$ bool_dflt = "y"
-$ if f$type(useperldebug) .nes. ""
+$ bool_dflt = "n"
+$ if f$type(DEBUGGING) .nes. ""
$ then
-$ if f$extract(0,1,f$edit(useperldebug,"collapse,upcase")).eqs."N" .or. useperldebug .eqs. "undef" then bool_dflt="n"
+$ if f$extract(0,1,f$edit(DEBUGGING,"collapse,upcase")).eqs."Y" .or. DEBUGGING .eqs. "define" then bool_dflt="y"
$ endif
$ rp = "Build a DEBUGGING version of Perl? [''bool_dflt'] "
$ GOSUB myread
$ use_debugging_perl = ans
$!
-$! Ask if they want to build with MULTIPLICITY
-$ echo ""
-$ echo "Perl can be built so that multiple Perl interpreters can coexist"
-$ echo "within the same Perl executable."
-$ echo "There is some performance overhead, however, so you"
-$ echo "probably do not want to choose this unless you are going to be"
-$ echo "doing things with embedded perl."
-$ bool_dflt = "n"
-$ if f$type(usemultiplicity) .nes. ""
-$ then
-$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
-$ endif
-$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
-$ GOSUB myread
-$ IF ans
-$ THEN
-$ usemultiplicity="define"
-$ ELSE
-$ usemultiplicity="undef"
-$ ENDIF
-$!
-$! Ask if they want to build with 64-bit support
-$ IF (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
-$ THEN
-$ bool_dflt = "n"
-$ IF F$TYPE(use64bitint) .NES. ""
-$ THEN
-$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "You can have native 64-bit long integers."
-$ echo ""
-$ echo "Perl can be built to take advantage of 64-bit integer types"
-$ echo "on some systems, which provide a much larger range for perl's"
-$ echo "mathematical operations. (Note that does *not* enable 64-bit"
-$ echo "fileops at the moment, as Dec C doesn't do that yet)."
-$ echo "Choosing this option will most probably introduce binary incompatibilities."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default ''dflt'."
-$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ use64bitint = ans
-$!
-$ bool_dflt = "n"
-$ IF F$TYPE(use64bitall) .NES. ""
-$ THEN
-$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
-$ ENDIF
-$ echo ""
-$ echo "You may also choose to try maximal 64-bitness. It means using as much"
-$ echo "64-bitness as possible on the platform. This in turn means even more"
-$ echo "binary incompatibilities. On the other hand, your platform may not"
-$ echo "have any more 64-bitness available than what you already have chosen."
-$ echo ""
-$ echo "If this does not make any sense to you, just accept the default ''dflt'."
-$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
-$ GOSUB myread
-$ use64bitall=ans
-$ IF use64bitall .AND. .NOT. use64bitint
-$ THEN
-$ echo ""
-$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
-$ echo "the use of 64-bit integers."
-$ use64bitint="Y"
-$ ENDIF
-$ ENDIF ! AXP && >= 7.1
$!
$! Ask about threads, if appropriate
$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX"
$ GOSUB myread
$ if ans
$ THEN
+$ usethreads = "define"
$ use_threads="T"
$ ! Shall we do the 5.005-type threads, or IThreads?
$ echo "Since release 5.6, Perl has had two different threading implementations,"
$ bool_dflt = "y"
$ if f$type(useithreads) .nes. ""
$ then
-$ if .not. useithreads .or. useithreads .eqs. "undef" then bool_dflt="n"
+$ if useithreads .eqs. "undef" then bool_dflt="n"
$ endif
$ if f$type(use5005threads) .nes. ""
$ then
$ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="n"
$ endif
-$ rp = "Use the newer intepreter-based ithreads? [''bool_dflt'] "
+$ rp = "Use the newer interpreter-based ithreads? [''bool_dflt'] "
$ GOSUB myread
$ use_ithreads=ans
$ if use_ithreads
$ ELSE
$ use_5005_threads="Y"
$ ENDIF
-$ ! Are they on VMS 7.1 on an alpha?
-$ if (archname.eqs."VMS_AXP").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ ! Are they on VMS 7.1 or greater?
+$ IF "''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.1"
$ THEN
$ echo ""
-$ echo "Threaded perl can be linked to use multiple kernel threads"
-$ echo "and system upcalls on VMS 7.1+ on Alpha systems. This feature"
-$ echo "allows multiple threads to execute simultaneously on an SMP"
-$ echo "system as well as preventing a single thread from blocking"
-$ echo "all the threads in a program, even on a single-processor"
-$ echo "machine. Unfortunately, this feature isn't safe on an"
-$ echo "unpatched 7.1 system (several OS patches were required when"
-$ echo "this procedure was written)."
-$ bool_dflt = "n"
-$ rp = "Enable multiple kernel threads and upcalls? [''bool_dflt'] "
+$ echo "Threaded Perl can be linked to use system upcalls on your system. This feature"
+$ echo "allows the thread scheduler to be made aware of system events (such as I/O)"
+$ echo "so as to prevent a single thread from blocking all the threads in a program,"
+$ echo "even on a single-processor machine."
+$ bool_dflt = "y"
+$ IF f$type(usethreadupcalls) .NES. ""
+$ THEN
+$ if .not. usethreadupcalls .or. usethreadupcalls .eqs. "undef" then bool_dflt="n"
+$ ENDIF
+$ rp = "Enable thread upcalls? [''bool_dflt'] "
$ gosub myread
-$ if ans
+$ IF ans
$ THEN
-$ Thread_Live_Dangerously = "MT=MT=1"
+$ thread_upcalls = "MTU=MTU=1"
+$ usethreadupcalls = "define"
+$ ! Are they on alpha or itanium?
+$ IF (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") .AND. ("''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.2")
+$ THEN
+$ echo ""
+$ echo "Threaded Perl can be linked to use multiple kernel threads on your system."
+$ echo "This feature allows multiple user threads to make use of multiple CPUs on"
+$ echo "a multi-processor machine."
+$ bool_dflt = "n"
+$ IF f$type(usekernelthreads) .nes. ""
+$ THEN
+$ if usekernelthreads .or. usekernelthreads .eqs. "define" then bool_dflt="y"
+$ ENDIF
+$ rp = "Enable multiple kernel threads? [''bool_dflt'] "
+$ gosub myread
+$ IF ans
+$ THEN
+$ thread_kernel = "MTK=MTK=1"
+$ usekernelthreads = "define"
+$ ENDIF
+$ ENDIF
$ ENDIF
$ ENDIF
+$ ELSE
+$ usethreads = "undef"
$ ENDIF
$ ENDIF
-$ IF archname .EQS. "VMS_AXP"
+$ IF F$TYPE(usethreadupcalls) .EQS. "" THEN usethreadupcalls = "undef"
+$ IF F$TYPE(usekernelthreads) .EQS. "" THEN usekernelthreads = "undef"
+$!
+$! Ask if they want to build with MULTIPLICITY
+$ echo ""
+$ echo "Perl can be built so that multiple Perl interpreters can coexist"
+$ echo "within the same Perl executable."
+$ IF usethreads .OR. usethreads .EQS. "define"
$ THEN
-$! Case sensitive?
-$ echo ""
-$ echo "By default, perl (and pretty much everything else on VMS) uses"
-$ echo "case-insensitive linker symbols. Which is to say, when the"
-$ echo "underlying C code makes a call to a routine called Perl_foo in"
-$ echo "the source, the name in the object modules or shareable images"
-$ echo "is really PERL_FOO. There are some packages that use an"
-$ echo "embedded perl interpreter that instead require case-sensitive"
-$ echo "linker symbols."
-$ echo ""
-$ echo "If you have no idea what this means, and do not have"
+$ echo "This multiple interpreter support is required for interpreter-based threads."
+$ usemultiplicity="define"
+$ ELSE
+$ bool_dflt = "n"
+$ if f$type(usemultiplicity) .nes. ""
+$ then
+$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y"
+$ endif
+$ rp = "Build Perl for multiplicity? [''bool_dflt'] "
+$ GOSUB myread
+$ IF ans
+$ THEN
+$ usemultiplicity="define"
+$ ELSE
+$ usemultiplicity="undef"
+$ ENDIF
+$ ENDIF
+$!
+$! Ask if they want to build with 64-bit support
+$ IF (F$ELEMENT(0, "-", archname).NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1")
+$ THEN
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitint) .NES. ""
+$ THEN
+$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "You have natively 64-bit long integers."
+$ echo ""
+$ echo "Perl can be built to take advantage of 64-bit integer types"
+$ echo "on some systems, To do so, Configure can be run with -Duse64bitint."
+$ echo "Choosing this option will most probably introduce binary incompatibilities."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ use64bitint = ans
+$!
+$ bool_dflt = "n"
+$ IF F$TYPE(use64bitall) .NES. ""
+$ THEN
+$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "You may also choose to try maximal 64-bitness. It means using as much"
+$ echo "64-bitness as possible on the platform. This in turn means even more"
+$ echo "binary incompatibilities. On the other hand, your platform may not"
+$ echo "have any more 64-bitness available than what you already have chosen."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ use64bitall=ans
+$ IF use64bitall .AND. .NOT. use64bitint
+$ THEN
+$ echo ""
+$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on"
+$ echo "the use of 64-bit integers."
+$ use64bitint="Y"
+$ ENDIF
+$!
+$ bool_dflt = use64bitall
+$ IF F$TYPE(uselargefiles) .NES. ""
+$ THEN
+$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)"
+$ echo "on some systems. To do so, Configure can be run with -Duselargefiles."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to understand large files, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselargefiles=ans
+$!
+$ bool_dflt = "n"
+$ IF F$TYPE(uselongdouble) .NES. ""
+$ THEN
+$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y"
+$ ENDIF
+$ echo ""
+$ echo "Perl can be built to take advantage of long doubles which"
+$ echo "(if available) may give more accuracy and range for floating point numbers."
+$ echo ""
+$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
+$ rp = "Try to use long doubles, if available? [''bool_dflt'] "
+$ GOSUB myread
+$ uselongdouble = ans
+$!
+$ ENDIF ! not VAX && >= 7.1
+$!
+$ IF usesitecustomize .OR. usesitecustomize .eqs. "define"
+$ THEN
+$ usesitecustomize = "define"
+$ ELSE
+$ usesitecustomize = "undef"
+$ ENDIF
+$!
+$! Case sensitive?
+$ echo ""
+$ echo "By default, perl (and pretty much everything else on VMS) uses"
+$ echo "case-insensitive linker symbols. Which is to say, when the"
+$ echo "underlying C code makes a call to a routine called Perl_foo in"
+$ echo "the source, the name in the object modules or shareable images"
+$ echo "is really PERL_FOO. There are some packages that use an"
+$ echo "embedded perl interpreter that instead require case-sensitive"
+$ echo "linker symbols."
+$ echo ""
+$ echo "If you have no idea what this means, and do not have"
$ echo "any program requiring anything, choose the default."
$ bool_dflt = be_case_sensitive
$ if f$type(usecasesensitive) .nes. ""
$ rp = "Build with case-sensitive symbols? [''bool_dflt'] "
$ GOSUB myread
$ be_case_sensitive = ans
+$!
+$! Shortened symbols?
+$ echo ""
+$ echo "The VMS linker does not handle symbol names longer than 31 characters,"
+$ echo "but the compiler can shorten long symbols if requested."
+$ bool_dflt = shorten_long_symbols
+$ if f$type(useshortenedsymbols) .nes. ""
+$ then
+$ if useshortenedsymbols .or. useshortenedsymbols .eqs. "define" then bool_dflt = "y"
+$ if f$extract(0,1,f$edit(useshortenedsymbols,"collapse,upcase")) .eqs. "N" .or. useshortenedsymbols .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Build with long symbols shortened? [''bool_dflt'] "
+$ GOSUB myread
+$ shorten_long_symbols = ans
+$ IF F$ELEMENT(0, "-", archname) .NES. "VMS_VAX"
+$ THEN
$! IEEE math?
$ echo ""
-$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers"
-$ echo "internally on Alpha, but if you need G_FLOAT for binary compatibility"
+$ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers on"
+$ echo "Alpha and Itanium, but if you need G_FLOAT for binary compatibility"
$ echo "with an external library or existing data, you may wish to disable"
$ echo "the IEEE math option."
$ bool_dflt = use_ieee_math
$ GOSUB myread
$ use_ieee_math = ans
$ ELSE
-$ be_case_sensitive = "n"
$ use_ieee_math = "n"
$ ENDIF
$ useieee = "undef"
$ usecasesensitive = "undef"
+$ useshortenedsymbols = "undef"
$ if (use_ieee_math) then useieee = "define"
$ if (be_case_sensitive) then usecasesensitive = "define"
+$ if (shorten_long_symbols) then useshortenedsymbols = "define"
+$! Unlink all versions?
+$ echo ""
+$ echo "By default, Perl's unlink() provides VMS-like behavior and only"
+$ echo "deletes the latest version of a file. Enabling this option builds"
+$ echo "Perl so that unlink() deletes all versions of a file."
+$ bool_dflt = unlink_all_versions
+$ if f$type(unlink_all_versions) .nes. ""
+$ then
+$ if unlink_all_versions .or. unlink_all_versions .eqs. "define"
+$ then
+$ bool_dflt="y"
+$ else
+$ bool_dflt="n"
+$ endif
+$ endif
+$ rp = "Make unlink() delete all versions of a file? [''bool_dflt'] "
+$ GOSUB myread
+$ unlink_all_versions = ans
+$ IF unlink_all_versions
+$ THEN
+$ d_unlink_all_versions = "define"
+$ ELSE
+$ d_unlink_all_versions = "undef"
+$ ENDIF
+$!
$! CC Flags
$ echo ""
$ echo "Your compiler may want other flags. For this question you should include"
$ IF ans .EQS. "none" THEN ans = ""
$ user_c_flags = "''ans'"
$!
-$! Ask whether they want to use secure logical translation when tainting
-$ echo ""
-$ echo "As Perl starts up, it checks several logical names, such as"
-$ echo "PERL5LIB and PERL_ENV_TABLES, which allow you to modify aspects"
-$ echo "of its behavior. For additional security, you may limit this"
-$ echo "process to executive- and kernel-mode translation when tainting"
-$ echo "is enabled. In this case, logical names normally skipped when"
-$ echo "tainting is enabled (e.g. PERL5OPTS) are translated as well."
-$ echo "If you do not choose to do this, the usual order of access modes"
-$ echo "is used for logical name translation."
-$ echo ""
-$ echo "This restriction does not apply to the %ENV hash or to implicit"
-$ echo "logical name translation during parsing of file specifications;"
-$ echo "these always use the normal sequence of access modes for logical"
-$ echo "name translation."
-$ bool_dflt = "y"
-$ if f$type(usesecurelog) .nes. ""
-$ then
-$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n"
-$ endif
-$ rp = "Use secure logical name translation? [''bool_dflt'] "
-$ GOSUB myread
-$ d_secintgenv = ans
-$ usesecurelog = "undef"
-$ if (d_secintgenv) then usesecurelog = "define"
+$! Ask whether they want to use secure logical translation when tainting
+$ echo ""
+$ echo "As Perl starts up, it checks several logical names, such as"
+$ echo "PERL5LIB and PERL_ENV_TABLES, which allow you to modify aspects"
+$ echo "of its behavior. For additional security, you may limit this"
+$ echo "process to executive- and kernel-mode translation when tainting"
+$ echo "is enabled. In this case, logical names normally skipped when"
+$ echo "tainting is enabled (e.g. PERL5OPTS) are translated as well."
+$ echo "If you do not choose to do this, the usual order of access modes"
+$ echo "is used for logical name translation."
+$ echo ""
+$ echo "This restriction does not apply to the %ENV hash or to implicit"
+$ echo "logical name translation during parsing of file specifications;"
+$ echo "these always use the normal sequence of access modes for logical"
+$ echo "name translation."
+$ bool_dflt = "y"
+$ if f$type(usesecurelog) .nes. ""
+$ then
+$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n"
+$ endif
+$ rp = "Use secure logical name translation? [''bool_dflt'] "
+$ GOSUB myread
+$ d_secintgenv = ans
+$ usesecurelog = "undef"
+$ if (d_secintgenv) then usesecurelog = "define"
+$!
+$! Ask whether they want to default filetypes
+$ echo ""
+$ echo "When you pass the name of a program to Perl on the command line,"
+$ echo "it generally doesn't supply any defaults unless the -S command"
+$ echo "line switch is specified. In keeping with the VMS tradition of"
+$ echo "default file types, however, you can configure Perl to try default"
+$ echo "file types of nothing, .pl, and .com, in that order (e.g. typing"
+$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and"
+$ echo "finally foo.com)."
+$ echo ""
+$ echo "This is currently broken in some configurations. Only enable it if"
+$ echo "you know what you are doing."
+$ bool_dflt = "n"
+$ if f$type(usedefaulttypes) .nes. ""
+$ then
+$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y"
+$ endif
+$ rp = "Always use default file types? [''bool_dflt'] "
+$ GOSUB myread
+$ d_alwdeftype = ans
+$ usedefaulttypes = "undef"
+$ if (d_alwdeftype) then usedefaulttypes = "define"
+$!
+$ dflt = archname
+$ rp = "What is your architecture name? [''archname'] "
+$ GOSUB myread
+$ IF ans.NES.""
+$ THEN
+$ ans = F$EDIT(ans,"COLLAPSE, UPCASE")
+$ IF (ans.NES.archname) !.AND.knowitall
+$ THEN
+$ echo4 "I'll go with ''archname' anyway..."
+$ ENDIF
+$ ENDIF
+$!
+$ IF usethreads .OR. usethreads .EQS. "define"
+$ THEN
+$ echo4 "Threads selected."
+$ IF F$LOCATE("-thread", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-thread"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -thread."
+$ ENDIF
+$ ENDIF
+$!
+$ IF usemultiplicity .OR. usemultiplicity .EQS. "define"
+$ THEN
+$ echo4 "Multiplicity selected."
+$ IF F$LOCATE("-multi", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-multi"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -multi."
+$ ENDIF
+$ ENDIF
+$!
+$ IF uselongdouble .OR. uselongdouble .EQS. "define"
+$ THEN
+$ echo4 "Long doubles selected."
+$ IF F$LOCATE("-ld", archname) .EQ. F$LENGTH(archname)
+$ THEN
+$ archname = "''archname'-ld"
+$ echo4 "...setting architecture name to ''archname'."
+$ ELSE
+$ echo4 "...and architecture name already has -ld."
+$ ENDIF
+$ ENDIF
+$!
+$ bool_dflt = "n"
+$ vms_prefix = "perl_root"
+$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE")
+$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] "
+$ GOSUB myread
+$ IF .NOT. ans
+$ THEN
+$ sharedperl = "N"
+$ ELSE
+$ sharedperl = "Y"
+$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_AXP")
+$ THEN
+$ macros = macros + """AXE=1"","
+$ ENDIF
+$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_IA64")
+$ THEN
+$ macros = macros + """IXE=1"","
+$ ENDIF
+$ ENDIF
+$!
+$!: is AFS running? !sfn
+$!: decide how portable to be. Allow command line overrides. !sfn
+$!: set up shell script to do ~ expansion !sfn
+$!: expand filename !sfn
+$!: now set up to get a file name !sfn
+$!
+$ IF F$TYPE(prefix) .EQS. ""
+$ THEN
+$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]"
+$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;"
+$ prefixbase = prefix - "]"
+$! Add _ROOT to make install PERL_ROOT differ from build directory.
+$ prefix = prefixbase + "_ROOT.]"
+$ ENDIF
+$ ! more redundant scrubbing of values
+$ prefix = prefix - "000000."
+$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]"
+$ src = prefix
+$!: determine root of directory hierarchy where package will be installed.
+$ dflt = prefix
+$ IF .NOT.silent
+$ THEN
+$ echo ""
+$ echo "By default, ''package' will be installed in ''dflt', pod"
+$ echo "pages under ''prefixbase'.LIB.POD], etc..., i.e. with ''dflt' as prefix for"
+$ echo "all installation directories."
+$ echo "On ''osname' the prefix is used to DEFINE the ''vms_prefixup' prior to installation"
+$ echo "as well as during subsequent use of ''package' via ''packageup'_SETUP.COM."
+$ ENDIF
+$ rp = "Installation prefix to use (for ''vms_prefixup')? [ ''dflt' ] "
+$ GOSUB myread
+$ IF ans.NES.""
+$ THEN
+$ prefix = ans
+$ IF F$LOCATE(".]",ans) .EQ. F$LENGTH(ans) THEN prefix = prefix - "]" + ".]"
+$ ELSE
+$ prefix = dflt
+$ ENDIF
+$ perl_root = prefix
+$!
+$! Check here for pre-existing PERL_ROOT.
+$! -> ask if removal desired.
+$! Check here for writability of requested PERL_ROOT if it is not the default (cwd).
+$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable.
+$!
+$ tmp = perl_root - ".]" + "]"
+$ dflt = f$parse(tmp,,,,)
+$ IF dflt .eqs. ""
+$ THEN
+$ echo4 "''tmp' does not yet exist."
+$! create/directory 'tmp'
+$ ELSE
+$ echo4 "''tmp' already exists."
+$ ENDIF
+$!
+$ vms_skip_install = "true"
+$ bool_dflt = "y"
+$! echo ""
+$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] "
+$ GOSUB myread
+$ IF (.NOT.ans) THEN vms_skip_install = "false"
+$ IF (.NOT.vms_skip_install)
+$ THEN
+$!
+$!: set the prefixit variable, to compute a suitable default value
+$!
+$!: determine where private library files go
+$!: Usual default is /usr/local/lib/perl5. Also allow things like
+$!: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
+$ IF .NOT.silent
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
+
+There are some auxiliary files for perl5 that need to be put into a
+private library directory that is accessible by everyone.
+$ EOD
+$ ENDIF
+$ IF F$TYPE(privlib) .NES. ""
+$ THEN dflt = privlib
+$ ELSE dflt = "''vms_prefix':[lib]"
+$ ENDIF
+$ rp = "Pathname where the private library files will reside? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ privlib = ans
+$!
+$ ENDIF !%Config-I-VMS, skip remaining "where install" questions
+$!
+$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true
+$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = ""
+$ IF perl_symbol
+$ THEN bool_dflt = "y"
+$ ELSE bool_dflt = "n"
+$ ENDIF
+$ IF .NOT.silent
+$ THEN
+$ echo ""
+$ echo "You may choose to write ''packageup'_SETUP.COM to assign a foreign"
+$ echo "symbol to invoke ''package', which is the usual method."
+$ echO "If you do not do so then you would need a DCL command verb at the"
+$ echo "process or the system wide level."
+$ ENDIF
+$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] "
+$ GOSUB myread
+$ IF (.NOT.ans) THEN perl_symbol = "false"
+$!
+$ IF (.NOT.perl_symbol)
+$ THEN
+$ IF perl_verb .EQS. "DCLTABLES"
+$ THEN bool_dflt = "n"
+$ ELSE bool_dflt = "y"
+$ ENDIF
+$ IF .NOT.silent
+$ THEN
+$ echo ""
+$ echo "Since you won't be using a symbol you must choose to put the ''packageup'"
+$ echo "verb in a per-process table or in the system wide DCLTABLES (which"
+$ echo "would require write privilege)."
+$ ENDIF
+$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] "
+$ GOSUB myread
+$ IF (.NOT.ans)
+$ THEN perl_verb = "DCLTABLES"
+$ ELSE perl_verb = "PROCESS"
+$ ENDIF
+$ ENDIF ! (.NOT.perl_symbol)
+$!
+$ IF (.NOT.vms_skip_install)
+$ THEN
+$!: set the prefixup variable, to restore leading tilde escape !sfn
+$!
+$!: determine where public architecture dependent libraries go
+$ IF (.NOT.silent)
+$ THEN
+$ echo ""
+$ echo "''package' contains architecture-dependent library files. If you are"
+$ ENDIF
+$ IF (.NOT.silent)
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
+sharing libraries in a heterogeneous environment, you might store
+these files in a separate location. Otherwise, you can just include
+them with the rest of the public library files.
+$ EOD
+$ ENDIF
+$ IF F$TYPE(archlib) .NES. ""
+$ THEN dflt = archlib
+$ ELSE dflt = privlib - "]" + "." + archname + "." + version + "]"
+$ ENDIF
+$ rp = "Where do you want to put the public architecture-dependent libraries? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ archlib = ans
+$!
+$ ENDIF !%Config-I-VMS, skip "where install" questions
+$ IF (.NOT.vms_skip_install)
+$ THEN
+$!: it so happens the Eunice I know will not run shell scripts in Unix format
+$!
+$!: see if setuid scripts can be secure !sfn
+$!: now see if they want to do setuid emulation !sfn
+$!
+$!: determine where site specific libraries go.
+$ IF .NOT.silent
+$ THEN
+$ TYPE SYS$INPUT:
+$ DECK
+
+The installation process will also create a directory for
+site-specific extensions and modules. Some users find it convenient
+to place all local files in this directory rather than in the main
+distribution directory.
+$ EOD
+$ ENDIF
+$ IF F$TYPE(sitelib) .NES. ""
+$ THEN dflt = sitelib
+$ ELSE dflt = privlib - "]" + ".SITE_PERL]"
+$ ENDIF
+$ rp = "Pathname for the site-specific library files? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ sitelib = ans
+$!
+$!: determine where site specific architecture-dependent libraries go.
+$ IF .NOT.silent
+$ THEN TYPE SYS$INPUT:
+$ DECK
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+$ EOD
+$ ENDIF
+$ IF F$TYPE(sitearch) .NES. ""
+$ THEN dflt = sitearch
+$ ELSE dflt = sitelib - "]" + "." + archname + "]"
+$ ENDIF
+$ rp = "Pathname for the site-specific architecture-dependent library files? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ sitearch = ans
+$!
+$!: determine where old public architecture dependent libraries might be
+$!
+$!: determine where public executables go
+$ IF F$TYPE(bin) .NES. ""
+$ THEN dflt = bin
+$! ELSE dflt = prefix - ".]" + ".BIN]"
+$ ELSE dflt = "/''vms_prefix'"
+$ ENDIF
+$ rp = "Pathname where the public executables will reside? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ bin = ans
+$!
+$!: determine where add-on public executables go
+$ IF F$TYPE(sitebin) .NES. ""
+$ THEN dflt = sitebin
+$ ELSE dflt = "''vms_prefix':[bin.''archname']"
+$ ENDIF
+$ rp = "Pathname where the add-on public executables should be installed? "
+$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ")
+$ GOSUB myread
+$ sitebin = ans
+$!
+$!: determine where manual pages are on this system
+$!: What suffix to use on installed man pages
+$!: see if we can have long filenames
+$!: determine where library module manual pages go
+$!: What suffix to use on installed man pages
+$!: see what memory models we can support
+$!
+$ ELSE ! skipping "where install" questions, we must set some symbols
+$ IF F$TYPE(archlib).EQS."" THEN -
+ archlib="''vms_prefix':[lib.''archname'.''version']"
+$ IF F$TYPE(bin) .EQS. "" THEN -
+ bin="/''vms_prefix'"
+$ IF F$TYPE(privlib) .EQS. "" THEN -
+ privlib ="''vms_prefix':[lib]"
+$ IF F$TYPE(sitearch) .EQS. "" THEN -
+ sitearch="''vms_prefix':[lib.site_perl.''archname']"
+$ IF F$TYPE(sitelib) .EQS. "" THEN -
+ sitelib ="''vms_prefix':[lib.site_perl]"
+$ IF F$TYPE(sitebin) .EQS. "" THEN -
+ sitebin="''vms_prefix':[bin.''archname']"
+$ ENDIF !%Config-I-VMS, skip "where install" questions
+$!
+$! These derived locations can be set whether we've opted to
+$! skip the where install questions or not.
$!
-$! Ask whether they want to default filetypes
-$ echo ""
-$ echo "When you pass the name of a program to Perl on the command line,"
-$ echo "it generally doesn't supply any defaults unless the -S command"
-$ echo "line switch is specified. In keeping with the VMS tradition of"
-$ echo "default file types, however, you can configure Perl to try default"
-$ echo "file types of nothing, .pl, and .com, in that order (e.g. typing"
-$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and"
-$ echo "finally foo.com)."
+$ IF F$TYPE(archlibexp) .EQS. "" THEN -
+ archlibexp="''vms_prefix':[lib.''archname'.''version']"
+$ IF F$TYPE(binexp) .EQS. "" THEN -
+ binexp ="''vms_prefix':[000000]"
+$ IF F$TYPE(builddir) .EQS. "" THEN -
+ builddir ="''vms_prefix':[000000]"
+$ IF F$TYPE(installarchlib) .EQS. "" THEN -
+ installarchlib="''vms_prefix':[lib.''archname'.''version']"
+$ IF F$TYPE(installbin) .EQS. "" THEN -
+ installbin ="''vms_prefix':[000000]"
+$ IF F$TYPE(installscript) .EQS. "" THEN -
+ installscript ="''vms_prefix':[utils]"
+$ IF F$TYPE(installman1dir) .EQS. "" THEN -
+ installman1dir ="''vms_prefix':[man.man1]"
+$ IF F$TYPE(installman3dir) .EQS. "" THEN -
+ installman3dir ="''vms_prefix':[man.man3]"
+$ IF F$TYPE(installprivlib) .EQS. "" THEN -
+ installprivlib ="''vms_prefix':[lib]"
+$ IF F$TYPE(installsitearch) .EQS. "" THEN -
+ installsitearch="''vms_prefix':[lib.site_perl.''archname']"
+$ IF F$TYPE(installsitelib) .EQS. "" THEN -
+ installsitelib ="''vms_prefix':[lib.site_perl]"
+$ IF F$TYPE(oldarchlib) .EQS. "" THEN -
+ oldarchlib="''vms_prefix':[lib.''archname']"
+$ IF F$TYPE(oldarchlibexp) .EQS. "" THEN -
+ oldarchlibexp="''vms_prefix':[lib.''archname']"
+$ IF F$TYPE(privlibexp) .EQS. "" THEN -
+ privlibexp ="''vms_prefix':[lib]"
+$ IF F$TYPE(scriptdir) .EQS. "" THEN -
+ scriptdir ="''vms_prefix':[utils]"
+$ IF F$TYPE(sitearchexp) .EQS. "" THEN -
+ sitearchexp ="''vms_prefix':[lib.site_perl.''archname']"
+$ IF F$TYPE(sitelib_stem) .EQS. "" THEN -
+ sitelib_stem ="''vms_prefix':[lib.site_perl]"
+$ IF F$TYPE(sitelibexp) .EQS. "" THEN -
+ sitelibexp ="''vms_prefix':[lib.site_perl]"
+$!
+$! determine whether to use malloc wrapping
$ echo ""
-$ echo "This is currently broken in some configurations. Only enable it if"
-$ echo "you know what you are doing."
-$ bool_dflt = "n"
-$ if f$type(usedefaulttypes) .nes. ""
+$ bool_dflt = "y"
+$ IF F$TYPE(usemallocwrap) .nes. ""
$ then
-$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y"
+$ if .NOT. usemallocwrap .or. usemallocwrap .eqs. "undef" then bool_dflt = "n"
$ endif
-$ rp = "Always use default file types? [''bool_dflt'] "
+$ rp = "Do you wish to wrap malloc calls to protect against potential overflows? [''bool_dflt'] "
$ GOSUB myread
-$ d_alwdeftype = ans
-$ usedefaulttypes = "undef"
-$ if (d_alwdeftype) then usedefaulttypes = "define"
+$ IF ans
+$ THEN usemallocwrap = "define"
+$ ELSE usemallocwrap = "undef"
+$ ENDIF
$!
$! Ask if they want to use perl's memory allocator
$ echo ""
$ext_loop:
$ READ/END_OF_FILE=end_ext/ERROR=end_ext CONFIG line
$ IF F$EXTRACT(0,4,line) .NES. "ext/" .AND. -
- F$EXTRACT(0,8,line) .NES. "vms/ext/" THEN goto ext_loop
+ F$EXTRACT(0,5,line) .NES. "dist/".AND. -
+ F$EXTRACT(0,5,line) .NES. "cpan/" THEN goto ext_loop
$ line = F$EDIT(line,"COMPRESS")
$ line = F$ELEMENT(0," ",line)
-$ line_len = F$LENGTH(line)
-$ IF F$EXTRACT(line_len - 12,12,line) .NES. "/Makefile.PL" THEN goto ext_loop
-$ IF F$EXTRACT(0,4,line) .EQS. "ext/" THEN -
- xxx = F$EXTRACT(4,line_len - 16,line)
+$ IF F$EXTRACT(0,4,line) .EQS. "ext/"
+$ THEN
+$ xxx = F$ELEMENT(1,"/",line)
+$ IF F$SEARCH("[-.ext]''xxx'.DIR;1") .EQS. "" THEN GOTO ext_loop
+$ ENDIF
+$ IF F$EXTRACT(0,5,line) .EQS. "dist/"
+$ THEN
+$ xxx = F$ELEMENT(1,"/",line)
+$ IF F$SEARCH("[-.dist]''xxx'.DIR;1") .EQS. "" THEN GOTO ext_loop
+$ ENDIF
+$ IF F$EXTRACT(0,5,line) .EQS. "cpan/"
+$ THEN
+$ xxx = F$ELEMENT(1,"/",line)
+$ IF F$SEARCH("[-.cpan]''xxx'.DIR;1") .EQS. "" THEN GOTO ext_loop
+$ ENDIF
$ IF xxx .EQS. "DynaLoader" THEN goto ext_loop ! omit
-$ IF xxx .EQS. "SDBM_File/sdbm" THEN goto ext_loop ! sub extension - omit
-$ IF xxx .EQS. "Devel/PPPort/harness" THEN goto ext_loop ! sub extension - omit
-$ IF F$EXTRACT(0,7,xxx) .EQS. "Encode/" THEN goto ext_loop ! sub extension - omit
-$ IF xxx .EQS. "B/C" THEN goto ext_loop ! sub extension - omit
-$ IF F$EXTRACT(0,8,line) .EQS. "vms/ext/" THEN -
- xxx = "VMS/" + F$EXTRACT(8,line_len - 20,line)
-$ known_extensions = known_extensions + " ''xxx'"
+$!
+$! (extspec = xxx) =~ tr!-!/!
+$ extspec = ""
+$ idx = 0
+$ extension_dir_name = xxx
+$ replace_dash_with_slash:
+$ before = F$ELEMENT(idx, "-", xxx)
+$ IF before .EQS. "-" THEN goto end_replace_dash_with_slash
+$ IF extspec .NES. ""
+$ THEN
+$ extspec = extspec + "/"
+$ ENDIF
+$ extspec = extspec + before
+$ idx = idx + 1
+$ goto replace_dash_with_slash
+$
+$ end_replace_dash_with_slash:
+$
+$ xxx = known_extensions
+$ gosub may_already_have_extension
+$ IF $STATUS .EQ. 1
+$ THEN
+$ xxx = nonxs_ext
+$ gosub may_already_have_extension
+$ ENDIF
+$ IF $STATUS .EQ. 1
+$ THEN
+$ xxx = nonxs_ext2
+$ gosub may_already_have_extension
+$ ENDIF
+$ IF $STATUS .NE. 1 THEN goto ext_loop
+$ goto found_new_extension
+$!
+$ may_already_have_extension:
+$ idx = F$LOCATE(extspec, xxx)
+$ extlen = F$LENGTH(xxx)
+$ IF idx .EQ. extlen THEN return 1 ! didn't find it
+$! But "Flirble" may just be part of "Acme-Flirble". This is not
+$! bullet-proof because we may only be looking at one chunk of the
+$! existing extension list.
+$ IF idx .GT. 0 .AND. F$EXTRACT(idx - 1, 1, xxx) .NES. " "
+$ THEN
+$ xxx = F$EXTRACT(idx + F$LENGTH(extspec) + 1, extlen, xxx)
+$ GOTO may_already_have_extension
+$ ENDIF
+$! But "Foo" may just be part of "Foo-Bar" so check for equality.
+$ xxx = F$EXTRACT(idx, extlen - idx, xxx)
+$ IF F$ELEMENT(0, " ", xxx) .EQS. extspec
+$ THEN
+$ RETURN 3
+$ ELSE
+$ xxx = F$EXTRACT(F$LENGTH(extspec) + 1, extlen, xxx)
+ GOTO may_already_have_extension
+$ ENDIF
+$!
+$ found_new_extension:
+$ IF F$SEARCH("[-.ext.''extension_dir_name']*.xs") .EQS. "" .AND. F$SEARCH("[-.dist.''extension_dir_name']*.xs") .EQS. "" .AND. F$SEARCH("[-.cpan.''extension_dir_name']*.xs") .EQS. ""
+$ THEN
+$! Bit if a hack to get around the 1K buffer on older systems.
+$ IF F$LENGTH(nonxs_ext) .GT. 950
+$ THEN
+$ nonxs_ext2 = nonxs_ext2 + " ''extspec'"
+$ ELSE
+$ nonxs_ext = nonxs_ext + " ''extspec'"
+$ ENDIF
+$ ELSE
+$ known_extensions = known_extensions + " ''extspec'"
+$ ENDIF
$ goto ext_loop
$end_ext:
$ close CONFIG
$ DELETE/SYMBOL xxx
+$ DELETE/SYMBOL idx
+$ DELETE/SYMBOL extspec
+$ DELETE/SYMBOL extlen
+$ DELETE/SYMBOL extension_dir_name
$ known_extensions = F$EDIT(known_extensions,"TRIM,COMPRESS")
$ dflt = known_extensions
$ IF ccname .NES. "DEC" .AND. ccname .NES. "CXX"
$ dflt = dflt - "NDBM_File" ! needs porting/special library
$ dflt = dflt - "ODBM_File" ! needs porting/special library
$ dflt = dflt - "Sys/Syslog" ! needs porting/special library "GDBM_File macro LOG_DEBUG"
-$ IF .NOT. Has_socketshr .AND. .NOT. Has_Dec_C_Sockets
+$ IF .NOT. Has_Dec_C_Sockets
$ THEN
$ dflt = dflt - "Socket" ! optional on VMS
$ ENDIF
-$ IF .NOT. use_ithreads THEN dflt = dflt - "threads/shared"
-$ IF .NOT. use_ithreads THEN dflt = dflt - "threads"
-$ IF .NOT. use_threads THEN dflt = dflt - "Thread"
+$ dflt = dflt - "Win32API/File" - "Win32" ! need Dave Cutler's other project
+$ nonxs_ext = nonxs_ext - "Win32CORE"
+$ nonxs_ext2 = nonxs_ext2 - "Win32CORE"
$ dflt = F$EDIT(dflt,"TRIM,COMPRESS")
+$ nonxs_ext = F$EDIT(nonxs_ext,"TRIM,COMPRESS")
+$ nonxs_ext2 = F$EDIT(nonxs_ext2,"TRIM,COMPRESS")
$!
$! Ask for their default list of extensions to build
$ echo ""
$ echo "Which modules do you want to build into perl?"
$ rp = "[''dflt'] "
$ GOSUB myread
-$ extensions = F$EDIT(ans,"TRIM,COMPRESS")
+$ dynamic_ext = F$EDIT(ans,"TRIM,COMPRESS")
$!
$! %Config-I-VMS, determine build/make utility here (make gmake mmk mms)
$ echo ""
$ probers = "-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!-f Makefile. -v!/IDENT!/IDENT"
$ max_build = 7
$!
-$ orig_dflt = "MMK"
+$ orig_dflt = f$edit(builder,"UPCASE")
+$ if orig_dflt .eqs. "" then orig_dflt = "MMK"
$ default_set = ""
$ ok_builders = ""
$ OPEN/WRITE/ERROR=Open_error CONFIG Makefile.
$!
$!: locate the preferred pager for this system
$!pagers = "most|more|less|type/page"
-$ dflt = "type/page"
+$ IF osvers .GES. "V6.1"
+$ THEN
+$ dflt = "type/page=save=10"
+$ ELSE
+$ dflt = "type/page"
+$ ENDIF
$! assume that the presence of a most symbol indicates the presence
$! of the pager.
$ IF F$TYPE(most) .EQS. "STRING" THEN dflt = "most"
$ GOSUB myread
$ pager = ans
$!
-$! update [.vms]config.vms here
-$!
$! update makefile here
$! echo4 "Updating makefile..."
$!
$!
$ IF use_ieee_math
$ THEN
-$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm_results"
+$ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm"
+$ ELSE
+$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_IA64")
+$ THEN
+$ extra_flags = "''extra_flags'" + "/float=g_float"
+$ ENDIF
$ ENDIF
+$ names_flags = ""
$ IF be_case_sensitive
$ THEN
-$ extra_flags = "''extra_flags'" + "/Names=As_Is"
+$ names_flags = "AS_IS"
+$ ENDIF
+$ IF shorten_long_symbols
+$ THEN
+$ IF be_case_sensitive
+$ THEN
+$ names_flags = "''names_flags',SHORTENED"
+$ ELSE
+$ names_flags = "SHORTENED"
+$ ENDIF
+$ ENDIF
+$ IF F$LENGTH(names_flags) .ne. 0
+$ THEN
+$ extra_flags = "''extra_flags'" + "/NAMES=(''names_flags')"
$ ENDIF
+$ DELETE/SYMBOLS names_flags
$ extra_flags = "''extra_flags'" + "''user_c_flags'"
$!
$ min_pgflquota = "100000"
$ ENDIF
$ ENDIF
$!
-$! PerlIO abstraction
-$!
-$ bool_dflt = "y"
-$ IF F$TYPE(useperlio) .NES. ""
-$ then
-$ if f$extract(0,1,f$edit(useperlio,"collapse,upcase")) .eqs. "N" .or. useperlio .eqs. "undef" then bool_dflt = "n"
-$ endif
-$ IF .NOT. silent
-$ THEN
-$ echo "Previous versions of ''package' used the standard IO mechanisms as"
-$ TYPE SYS$INPUT:
-$ DECK
-defined in <stdio.h>. Versions 5.003_02 and later of perl allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-
-$ EOD
-$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'."
-$ ENDIF
-$ rp = "Use the PerlIO abstraction layer? [''bool_dflt'] "
-$ GOSUB myread
-$ IF ans
-$ THEN
-$ useperlio = "define"
-$ ELSE
-$ echo "Ok, doing things the stdio way."
-$ useperlio = "undef"
-$ ENDIF
-$!
$ echo ""
$ echo4 "Checking the C run-time library."
$!
$ ELSE
$ d_vms_be_case_sensitive = "undef"
$ ENDIF
+$ IF shorten_long_symbols
+$ THEN
+$ d_vms_shorten_long_symbols = "define"
+$ ELSE
+$ d_vms_shorten_long_symbols = "undef"
+$ ENDIF
$! Some constant defaults.
$ hwname = f$getsyi("HW_NAME")
$ myname = myhostname
$ ccdlflags=""
$ cccdlflags=""
$!
+$! FIXME -- This section does not really handle all the different permutations
+$! of 64-bitness, and it does not provide for the /POINTER_SIZE=64 compiler
+$! option that would be necessary to support the "explicit 64-bit interfaces"
+$! promised by -Dusemorebits.
+$!
+$ usemorebits = "undef"
$ IF use64bitint .OR. use64bitint .EQS. "define"
$ THEN
$ use64bitint = "define"
-$ uselargefiles = "define"
-$ uselongdouble = "define"
-$ alignbytes="16"
-$ usemorebits = "define"
$ ivdformat="""Ld"""
$ uvuformat="""Lu"""
$ uvoformat="""Lo"""
$ uvXUformat="""LX"""
$ ELSE
$ use64bitint = "undef"
-$ uselargefiles = "undef"
-$ uselongdouble = "undef"
-$ usemorebits = "undef"
$ ivdformat="""ld"""
$ uvuformat="""lu"""
$ uvoformat="""lo"""
$ ENDIF
$ IF uselongdouble .OR. uselongdouble .EQS. "define"
$ THEN
+$ uselongdouble = "define"
+$ alignbytes="16"
$ nveformat="""Le"""
+$ nvEUformat="""LE"""
$ nvfformat="""Lf"""
+$ nvFUformat="""LF"""
$ nvgformat="""Lg"""
+$ nvGUformat="""LG"""
$ ELSE
+$ uselongdouble = "undef"
$ nveformat="""e"""
+$ nvEUformat="""E"""
$ nvfformat="""f"""
+$ nvFUformat="""F"""
$ nvgformat="""g"""
+$ nvGUformat="""G"""
$ ENDIF
$ IF use64bitall .OR. use64bitall .EQS. "define"
$ THEN
$ ELSE
$ use64bitall = "undef"
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ uselargefiles = "define"
+$ ELSE
+$ uselargefiles = "undef"
+$ ENDIF
$!
$ usemymalloc = "undef"
$ if mymalloc then usemymalloc = "define"
$!
$ perl_cc=Mcc
$!
-$ IF (sharedperl .AND. archname .EQS. "VMS_AXP")
+$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP")
$ THEN
$ obj_ext=".abj"
$ so="axe"
$ exe_ext=".axe"
$ lib_ext=".alb"
$ ELSE
-$ obj_ext=".obj"
-$ so="exe"
-$ dlext="exe"
-$ exe_ext=".exe"
-$ lib_ext=".olb"
+$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_IA64")
+$ THEN
+$ obj_ext=".ibj"
+$ so="ixe"
+$ dlext="ixe"
+$ exe_ext=".ixe"
+$ lib_ext=".ilb"
+$ ELSE
+$ obj_ext=".obj"
+$ so="exe"
+$ dlext="exe"
+$ exe_ext=".exe"
+$ lib_ext=".olb"
+$ ENDIF
$ ENDIF
$ dlobj="dl_vms''obj_ext'"
$!
$ ELSE d_mymalloc="undef"
$ ENDIF
$!
+$ usedevel="undef"
$ usedl="define"
$ startperl="""$ perl 'f$env(\""procedure\"")' \""'"+"'p1'\"" \""'"+"'p2'\"" \""'"+"'p3'\"" \""'"+"'p4'\"" \""'"+"'p5'\"" \""'"+"'p6'\"" \""'"+"'p7'\"" \""'"+"'p8'\""!\n"
$ startperl=startperl + "$ exit++ + ++$status!=0 and $exit=$status=undef; while($#ARGV != -1 and $ARGV[$#ARGV] eq '"+"'){pop @ARGV;}"""
$!
$ perllibs=libs
$!
-$! Are we 64 bit?
$!
-$ IF use64bitint .OR. use64bitint .EQS. "define"
+$ IF F$ELEMENT(0, "-", archname) .NES. "VMS_VAX"
$ THEN
$ d_PRId64 = "define"
+$ d_PRIi64 = "define"
$ d_PRIu64 = "define"
$ d_PRIo64 = "define"
$ d_PRIx64 = "define"
$ d_quad = "define"
$ quadtype = "long long"
$ uquadtype = "unsigned long long"
-$ quadkind = "QUAD_IS_LONG_LONG"
+$ quadkind = "3"
+$!
$ d_frexpl = "define"
-$ d_isnan = "define"
-$ d_isnanl = "define"
$ d_modfl = "define"
+$ d_modflproto = "define"
$ ELSE
$ d_PRId64 = "undef"
+$ d_PRIi64 = "undef"
$ d_PRIXU64 = "undef"
$ d_PRIu64 = "undef"
$ d_PRIo64 = "undef"
$ sPRIu64 = ""
$ sPRIx64 = ""
$ d_quad = "undef"
-$ quadtype = "long"
-$ uquadtype = "unsigned long"
-$ quadkind = "QUAD_IS_LONG"
+$ quadtype = "undef"
+$ uquadtype = "undef"
+$ quadkind = "undef"
+$!
$ d_frexpl = "undef"
+$ d_modfl = "undef"
+$ d_modflproto = "undef"
+$ ENDIF
+$!
+$ IF useieee .OR. useieee .EQS. "define"
+$ THEN
+$ d_isnan = "define"
+$ d_isnanl = "define"
+$ ELSE
$ d_isnan = "undef"
$ d_isnanl = "undef"
-$ d_modfl = "undef"
$ ENDIF
$!
$! Now some that we build up
$ THEN
$ IF use_5005_threads
$ THEN
-$ arch = "''arch'-thread"
-$ archname = "''archname'-thread"
$ d_old_pthread_create_joinable = "undef"
$ old_pthread_create_joinable = " "
$ use5005threads = "define"
$ useithreads = "undef"
$ ELSE
-$ arch = "''arch'-ithread"
-$ archname = "''archname'-ithread"
$ d_old_pthread_create_joinable = "undef"
$ old_pthread_create_joinable = " "
$ use5005threads = "undef"
$ GOSUB inhdr
$ i_unistd = tmp
$!
+$! Check to see if we've got utime.h (which we should use if we have)
+$!
+$ i_netdb = "undef"
+$ tmp = "utime.h"
+$ GOSUB inhdr
+$ i_utime = tmp
+$!
+$! do we have getppid()?
+$!
+$ IF i_unistd .EQS. "define"
+$ THEN
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "#include <unistd.h>"
+$ WS "int main() {"
+$ WS "printf(""%d\n"",getppid());"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "getppid"
+$ GOSUB inlibc
+$ d_getppid = tmp
+$ ELSE
+$ d_getppid = "undef"
+$ ENDIF
+$!
$!: see if this is a libutil.h system
$!
$ tmp = "libutil.h"
$!
$! Check the prototype for select
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdio.h>"
$ WS "#include <types.h>"
$ IF i_unistd .EQS. "define" THEN WS "#include <unistd.h>"
-$ IF Has_Socketshr
-$ THEN
-$ WS "#include <socketshr.h>"
-$ ELSE
-$ WS "#include <time.h>"
-$ WS "#include <socket.h>"
-$ ENDIF
+$ WS "#include <time.h>"
+$ WS "#include <socket.h>"
$ WS "int main()"
$ WS "{"
$ WS "fd_set *foo;"
$ WS "#endif"
$ WS "#include <stdio.h>"
$ WS "#include <types.h>"
-$ IF Has_Socketshr
-$ THEN
-$ WS "#include <socketshr.h>"
-$ ENDIF
$ IF Has_Dec_C_Sockets
$ THEN
$ WS "#include <time.h>"
$ echo "You do not have int64_t."
$ ENDIF
$!
+$! Check to see if fseeko exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL;"
+$ WS "fseeko(f,(off_t)0,SEEK_SET);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "fseeko"
+$ GOSUB inlibc
+$ d_fseeko = tmp
+$!
+$! Check to see if ftello exists
+$!
+$ OS
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "FILE *f=NULL; off_t o=0;"
+$ WS "o=ftello(f);"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ tmp = "ftello"
+$ GOSUB inlibc
+$ d_ftello = tmp
+$!
$!: see if this is a netdb.h system
$ IF Has_Dec_C_Sockets
$ THEN
$!
$! Check to see if gethostname exists
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#endif"
$ WS "#include <stdio.h>"
$ WS "#include <types.h>"
-$ IF Has_Socketshr
-$ THEN
-$ WS "#include <socketshr.h>"
-$ ELSE
-$ WS "#include <time.h>"
-$ WS "#include <socket.h>"
-$ ENDIF
+$ WS "#include <time.h>"
+$ WS "#include <socket.h>"
$ WS "int main()"
$ WS "{"
$ WS "char name[100];"
$ GOSUB inhdr
$ i_sysfile = tmp
$!
+$!
+$! Check for sys/ioctl.h
+$!
+$ tmp = "sys/ioctl.h"
+$ GOSUB inhdr
+$ i_sysioctl = tmp
+$!
$! Check for sys/utsname.h
$!
$ tmp = "sys/utsname.h"
$ GOSUB inhdr
$ i_sysmode = tmp
$!
+$! Check for poll.h
+$!
+$ tmp = "sys/poll.h"
+$ gosub inhdr
+$ i_syspoll = tmp
+$!
$! Check for sys/access.h
$!
$ tmp = "sys/access.h"
$ WS "#if defined(F_SETLK) && defined(F_SETLKW)"
$ WS " struct flock flock;"
$ WS " int retval, fd;"
-$ WS " fd = open(""try.c"", O_RDONLY);"
+$ WS " fd = open(""[-]perl.c"", O_RDONLY);"
$ WS " flock.l_type = F_RDLCK;"
$ WS " flock.l_whence = SEEK_SET;"
$ WS " flock.l_start = flock.l_len = 0;"
$ GOSUB inlibc
$ d_strtoq = tmp
$!
-$! Check for strtoq
-$!
-$ OS
-$ WS "#if defined(__DECC) || defined(__DECCXX)"
-$ WS "#include <stdlib.h>"
-$ WS "#endif"
-$ WS "#include <string.h>"
-$ WS "int main()"
-$ WS "{"
-$ WS "__int64 result;"
-$ WS "result = strtoq(""123123"", NULL, 10);"
-$ WS "exit(0);"
-$ WS "}"
-$ CS
-$ tmp = "strtoq"
-$ GOSUB inlibc
-$ d_strtoq = tmp
-$!
$! Check for strtold
$!
$ OS
$ GOSUB inlibc
$ d_mkdtemp = tmp
$!
+$! Check for poll
+$!
+$ if i_poll .eqs. "define"
+$ then
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <poll.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "struct pollfd pfd;"
+$ WS "int count=poll(&pfd,1,0);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "poll"
+$ GOSUB inlibc
+$ d_poll = tmp
+$ else
+$ d_poll = "undef"
+$ endif
+$!
$! Check for setvbuf
$!
$ OS
$! ELSE dflt = "n"
$! ENDIF
$! echo "''package' can use the sfio library, but it is experimental."
-$! IF useperlio .EQS. "undef"
-$! THEN
-$! echo "For sfio also the PerlIO abstraction layer is needed."
-$! echo "Earlier you said you would not want that."
-$! ENDIF
$! rp="You seem to have sfio available, do you want to try using it? [''dflt'] "
$! GOSUB myread
$! IF ans .EQS. "" THEN ans = dflt
$! IF ans
$! THEN
-$! echo "Ok, turning on both sfio and PerlIO, then."
-$! useperlio="define"
+$! echo "Ok, turning on sfio then."
$! val="define"
$! ELSE
$! echo "Ok, avoiding sfio this time. I'll use stdio instead."
$!
$! Check for <netinet/in.h>
$!
-$ IF Has_Dec_C_Sockets .or. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ tmp = "netinet/in.h"
$ GOSUB inhdr
$!
$! Check for <netinet/tcp.h>
$!
-$ IF Has_Dec_C_Sockets .or. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ tmp = "netinet/tcp.h"
$ GOSUB inhdr
$!
$! Check for endhostent
$!
-$ IF Has_Dec_C_Sockets .or. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "endhostent();"
$!
$! Check for endnetent
$!
-$ IF Has_Dec_C_Sockets .or. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "endnetent();"
$!
$! Check for endprotoent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "endprotoent();"
$!
$! Check for endservent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "endservent();"
$!
$! Check for sethostent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "sethostent(1);"
$!
$! Check for setnetent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "setnetent(1);"
$!
$! Check for setprotoent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "setprotoent(1);"
$!
$! Check for setservent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "setservent(1);"
$!
$! Check for gethostent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "gethostent();"
$!
$! Check for getnetent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "getnetent();"
$!
$! Check for getprotoent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "getprotoent();"
$!
$! Check for getservent
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "getservent();"
$ d_getsent="undef"
$ ENDIF
$!
+$!
+$! Check for sa_len
+$!
+$ echo4 "Checking the availability of sa_len in the sockaddr struct ..."
+$ IF Has_Dec_C_Sockets
+$ THEN
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#define _SOCKADDR_LEN"
+$ WS "#include <types.h>"
+$ WS "#include <socket.h>"
+$ WS "int main() {"
+$ WS "struct sockaddr sa;"
+$ WS "return (sa.sa_len);"
+$ WS "}"
+$ CS
+$ GOSUB compile_ok
+$ IF compile_status .EQ. good_compile
+$ THEN
+$ d_sockaddr_sa_len="define"
+$ echo "You have sa_len in the sockaddr struct."
+$ ELSE
+$ d_sockaddr_sa_len="undef"
+$ echo "You do not have sa_len in the sockaddr struct."
+$ ENDIF
+$ ELSE
+$ d_sockaddr_sa_len="undef"
+$ echo "You do not have sa_len in the sockaddr struct."
+$ ENDIF
+$!
+$!
+$! Check for sin6_scope_id
+$!
+$ echo4 "Checking the availability of sin6_scope_id in the struct sockaddr_in6 ..."
+$ IF Has_Dec_C_Sockets
+$ THEN
+$ OS
+$ WS "#include <types.h>"
+$ WS "#include <socket.h>"
+$ WS "#include <in.h>"
+$ WS "int main() {"
+$ WS "struct sockaddr_in6 sin6;"
+$ WS "return (sin6.sin6_scope_id);"
+$ WS "}"
+$ CS
+$ GOSUB compile_ok
+$ IF compile_status .EQ. good_compile
+$ THEN
+$ d_sin6_scope_id="define"
+$ echo "You have sin6_scope_id in the sockaddr_in6 struct."
+$ ELSE
+$ d_sin6_scope_id="undef"
+$ echo "You do not have sin6_scope_id in the sockaddr_in6 struct."
+$ ENDIF
+$ ELSE
+$ d_sin6_scope_id="undef"
+$ echo "You do not have sin6_scope_id in the sockaddr_in6 struct."
+$ ENDIF
+$!
+$! Check for nanosleep
+$!
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <time.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "int asleep = nanosleep(NULL,NULL);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ tmp = "nanosleep"
+$ GOSUB inlibc
+$ d_nanosleep = tmp
+$!
$! Check for socklen_t
$!
-$ IF Has_Dec_C_Sockets .OR. Has_Socketshr
+$ IF Has_Dec_C_Sockets
$ THEN
$ echo4 "Checking to see if you have socklen_t..."
$ OS
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
-$ IF Has_Socketshr
-$ THEN WS "#include <socketshr.h>"
-$ ELSE IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
-$ ENDIF
+$ IF i_netdb .EQS. "define" THEN WS "#include <netdb.h>"
$ WS "int main()"
$ WS "{"
$ WS "socklen_t x = 16;"
$ sched_yield = " "
$ ENDIF
$!
+$! Check for pthread_attr_setscope and PTHREAD_SCOPE_SYSTEM.
+$! (The actual test is to be written.)
+$!
+$ d_pthread_attr_setscope="undef"
+$!
$! Check for generic pointer size
$!
$ echo4 "Checking to see how big your pointers are..."
$ sizesize = tmp
$ echo "Your ''zzz' size is ''sizesize' bytes."
$!
+$! Check for _LARGEFILE capability.
+$!
+$ off_t_size = 4
+$ OS
+$ WS "#define _LARGEFILE"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS "printf(""%d\n"", sizeof(off_t));"
+$ WS "return(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ off_t_size = tmp
+$ ENDIF
+$ echo "Your off_t size is ''off_t_size' bytes when _LARGEFILE is defined."
+$ IF off_t_size .ne. 8 .AND. (uselargefiles .OR. uselargefiles .eqs. "define")
+$ THEN
+$ echo4 "You configured with -Duselargefiles but your CRTL does not support _LARGEFILE."
+$ echo4 "I'm disabling large file support."
+$ uselargefiles = "undef"
+$ ENDIF
+$!
+$! Check for st_ino size.
+$!
+$ st_ino_size = 4
+$ OS
+$ WS "#include <sys/stat.h>"
+$ WS "#include <stdio.h>"
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>
+$ WS "#endif"
+$ WS "int main() {
+$ WS "#''uselargefiles' _LARGEFILE"
+$ WS "#ifdef _LARGEFILE"
+$ WS " printf(""%d\n"", sizeof(__ino64_t));"
+$ WS "#else"
+$ WS " printf(""%d\n"", sizeof(unsigned short)*3);"
+$ WS "#endif"
+$ WS " exit(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF link_status .EQ. good_link
+$ THEN
+$ GOSUB just_mcr_it
+$ st_ino_size = tmp
+$ ENDIF
+$ echo "Your st_ino size is ''st_ino_size' bytes."
+$!
+$! Tests for hard link, symbolic links, and 7.3 + CRTL features
+$!
+$ d_lchown = "undef"
+$ d_link = "undef"
+$ d_lstat = "undef"
+$ d_readlink = "undef"
+$ d_symlink = "undef"
+$ d_realpath = "undef"
+$!
+$! Hard link support has been present since 7.3-1 except for the
+$! easy to use DCL test to see if hardlinks are enabled on the build
+$! disk. That would require more work to test, and I am only testing
+$! this on 8.2, so that is why the 8.2 test.
+$!
+$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ THEN
+$ IF f$getdvi("SYS$DISK","HARDLINKS_SUPPORTED")
+$ THEN
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links enabled on build disk."
+$ echo "I will build with hard link support"
+$ d_link = "define"
+$ ELSE
+$ echo "I Found 64 bit OpenVMS 8.2 or later, and hard links disabled on build disk."
+$ echo "I will not build with hard link support."
+$ ENDIF
+$ ELSE
+$ echo4 "I can not detect if your CRTL and build disk support hard links."
+$ echo4 "I am disabling hard link support."
+$ ENDIF
+$!
+$ IF uselargefiles .OR. uselargefiles .eqs. "define"
+$ THEN
+$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ THEN
+$ echo4 "Largefile support enabled, so enabling standard stat support too."
+$ usestdstat = "y"
+$ echo4 -
+ "Looking for the realpath() function to indicate symbolic link support..."
+$ OS
+$! WS "#include <stdlib.h>"
+$ WS "void exit(int foo);"
+$ WS "char *realpath(const char *file_name, char * resolved_name, ...);"
+$ WS "int main()"
+$ WS "{"
+$ WS "char result[255];"
+$ WS "realpath(""foo"",result);"
+$ WS "exit(0);"
+$ WS "}"
+$ CS
+$ GOSUB link_ok
+$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
+$ THEN
+$ echo -
+ "Found realpath() which indicates symbolic link support is present."
+$ d_lchown = "define"
+$ d_lstat = "define"
+$ d_readlink = "define"
+$ d_symlink = "define"
+$! d_realpath = "define" ! Perl will not put it in the config.h file?
+$! Perl apparently does not use a built in realpath() on other platforms,
+$! but there is a severe performance penatly on OpenVMS to use the Perl
+$! script that implements a realpath(). The d_symlink symbol is used
+$! as a replacement for the d_realpath since they are related and both
+$! were activated by the CRTL at the same time.
+$!
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ echo4 "Your system does not support symbolic links."
+$ echo4 "I am disabling symbolic link support."
+$ ENDIF
+$ ELSE
+$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ THEN
+$ echo4 "-Duselargefiles is required for symbolic link support."
+$ echo4 "You did not specify that, so I am disabling symbolic link support."
+$ ENDIF
+$ ENDIF
+$!
+$!
+$! Check for grp.h -- should be 7.3 and later, but test to be sure
+$!
+$ tmp = "grp.h"
+$ GOSUB inhdr
+$ i_grp = tmp
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$!
+$ d_getgrgid_r = "undef"
+$ getgrgid_r_proto = "0"
+$ d_getgrnam_r = "undef"
+$ getgrnam_r_proto = "0"
+$ d_getpgid = "undef"
+$ d_getpgrp = "undef"
+$! N.B. We already have home-grown thread-safe versions of
+$! getpwnam and getpwuid -- no need to use CRTL versions
+$ d_getpwnam_r = "undef"
+$ getpwnam_r_proto = "0"
+$ d_getpwuid_r = "undef"
+$ getpwuid_r_proto = "0"
+$ d_setgrent = "undef"
+$ d_ttyname_r = "undef"
+$ ttyname_r_proto = "0"
+$ d_snprintf = "undef"
+$ d_vsnprintf = "undef"
+$ if (vms_ver .GES. "7.3-2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ then
+$ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with V7.3-2 routines"
+$ d_getgrgid_r = "define"
+$ getgrgid_r_proto = "1"
+$ d_getgrnam_r = "define"
+$ getgrnam_r_proto = "1"
+$ if d_symlink .or. d_symlink .EQS. "define"
+$ then
+$! FIXME: Need to find how to activate this.
+$! d_getpgid = "define"
+$! d_getpgrp = "define"
+$ endif
+$ d_setgrent = "define"
+$ d_ttyname_r = "define"
+$ ttyname_r_proto = "1"
+$ d_snprintf = "define"
+$ d_vsnprintf = "define"
+$ endif
+$!
+$! VMS V7.3-2 powered options
+$! We know that it is only available for V7.3-2 and later on 64 bit platforms.
+$! Only implementing right now on 8.2 because that is what I am testing
+$! These functions may require POSIX UIDs/GIDs to be active, so I am
+$! not activating the features at this time, just preparing this file
+$! to easily use them in the future.
+$!
+$ d_seteuid = "undef"
+$ d_setpgid = "undef"
+$ d_setpgrp = "undef"
+$ d_setregid = "undef"
+$ d_setreuid = "undef"
+$ d_setsid = "undef"
+$ ! Disable this section for now.
+$!$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ if .NOT. 1
+$ then
+$ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with V7.3-2 UID setting routines"
+$ d_seteuid = "define"
+$ d_setpgid = "define"
+$ d_setpgrp = "define"
+$ d_setregid = "define"
+$ d_setreuid = "define"
+$ d_setsid = "define"
+$ endif
+$!
+$! VMS V8 powered options
+$! We know that it is only available for 8.2 and later on 64 bit platforms.
+$!
+$ d_fstatvfs = "undef"
+$! d_statvfs = "undef"
+$ i_sysstatvfs = "undef"
+$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ then
+$ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with 8.2 routines"
+$ d_fstatvfs = "define"
+$! d_statvfs = "define"
+$ i_sysstatvfs = "define"
+$ endif
+$!
$! Check rand48 and its ilk
$!
$ echo4 "Looking for a random number function..."
$ IF compile_status .EQ. good_compile .AND. link_status .EQ. good_link
$ THEN
$ drand01 = "drand48()"
+$ randbits = "48"
+$ randfunc = "drand48"
$ randseedtype = "long int"
$ seedfunc = "srand48"
$ echo4 "Good, found drand48()."
$ ELSE
$ d_drand48proto = "undef"
$ drand01="random()"
+$ randbits = "31"
+$ randfunc = "random"
$ randseedtype = "unsigned"
$ seedfunc = "srandom"
$ OS
$ echo4 "OK, found random()."
$ ELSE
$ drand01="(((float)rand())*MY_INV_RAND_MAX)"
+$ randfunc = "rand"
$ randseedtype = "unsigned"
$ seedfunc = "srand"
$ echo4 "Yick, looks like I have to use rand()."
$ d_msync="define"
$ d_ualarm="define"
$ d_uname="define"
+$! d_unsetenv="define" ! Fix me - Activating requires changing VMS code
+$ d_unsetenv="undef" ! Change will be needed to allow GNV integration
+$ d_clearenv="undef"
$ d_usleep="define"
$ d_setitimer="define"
$ d_sigaction="define"
$ d_wait4="define"
$ d_index="define"
$ pidtype="pid_t"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2 SPARE18 SPARE19 CHLD CONT STOP TSTP TTIN TTOU DEBUG SPARE27 SPARE28 SPARE29 SPARE30 SPARE31 SPARE32 RTMIN RTMAX"",0"
-$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
-$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",""SPARE18"",""SPARE19"",""CHLD"",""CONT"",""STOP"",""TSTP"","
-$ psnwc3="""TTIN"",""TTOU"",""DEBUG"",""SPARE27"",""SPARE28"",""SPARE29"",""SPARE30"",""SPARE31"",""SPARE32"",""RTMIN"",""RTMAX"",0"
-$ sig_name_init = psnwc1 + psnwc2 + psnwc3
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 64"",0"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,64,0"
-$! perl_sig_num_with_commas=sig_num_init
-$ sig_size="36"
+$ sig_name1="ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE"
+$ sig_name2=" ALRM TERM USR1 USR2 NUM18 NUM19 CHLD CONT STOP TSTP TTIN TTOU DEBUG"
+$ IF (vms_ver .GES. "7.3")
+$ THEN
+$ sig_name2 = sig_name2 + " NUM27 WINCH"
+$ ENDIF
+$!* signal.h defines SIGRTMIN as 33 and SIGRTMAX as 64, but there is no
+$!* sigqueue function or other apparent means to do realtime signalling,
+$!* so let's not try to include the realtime range for now.
+$!* sig_name3=" NUM29 NUM30 NUM31 NUM32 RTMIN NUM34 NUM35 NUM36 NUM37 NUM38 NUM39 NUM40 NUM41 NUM42 NUM43"
+$!* sig_name4=" NUM44 NUM45 NUM46 NUM47 NUM48 NUM49 NUM50 NUM51 NUM52 NUM53 NUM54 NUM55 NUM56 NUM57 NUM58"
+$!* sig_name5=" NUM59 NUM60 NUM61 NUMT62 NUM63 RTMAX"
+$ sig_name = sig_name1 + sig_name2
+$ sig_num = ""
+$ sig_num_init = ""
+$ sig_name_init = ""
+$ sig_index = 0
+$!
+$ PARSE_SIG_NAME_LOOP:
+$!
+$ tmp = F$ELEMENT(sig_index, " ", sig_name)
+$ IF F$LENGTH(F$EDIT(tmp,"TRIM")) .eq. 0 THEN GOTO END_SIG_NAME_LOOP
+$ sig_name_init = sig_name_init + """''tmp'"","
+$ sig_num = sig_num + "''sig_index' "
+$ sig_num_init = sig_num_init + "''sig_index',"
+$ sig_index = sig_index + 1
+$ GOTO PARSE_SIG_NAME_LOOP
+$!
+$ END_SIG_NAME_LOOP:
+$!
+$ sig_name_init = sig_name_init + "0"
+$ sig_num_init = sig_num_init + "0"
+$ sig_size = "''sig_index'"
+$ sig_index = sig_index - 1
+$ sig_count = "''sig_index'"
$ uidtype="uid_t"
$ d_pathconf="define"
$ d_fpathconf="define"
$ d_msync="undef"
$ d_ualarm="undef"
$ d_uname="undef"
+$ d_unsetenv="undef"
+$ d_clearenv="undef"
$ d_usleep="undef"
$ d_setitimer="undef"
$ d_sigaction="undef"
$ d_truncate="undef"
$ d_wait4="undef"
$ d_index="undef"
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"",0"
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"",0"
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17"
$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0"
-$! perl_sig_num_with_commas=sig_num_init
$ sig_size="19"
+$ sig_count="15"
+$ if (vms_ver .GES. "6.2") then sig_count="17"
$ uidtype="unsigned int"
$ d_pathconf="undef"
$ d_fpathconf="undef"
$ d_stdio_cnt_lval="define"
$ d_stdio_ptr_lval="define"
$ d_stdstdio="define"
+$ d_faststdio="define"
$ d_wcstombs="define"
$ d_mblen="define"
$ d_mktime="define"
$ d_stdio_cnt_lval="undef"
$ d_stdio_ptr_lval="undef"
$ d_stdstdio="undef"
+$ d_faststdio="undef"
$ d_wcstombs="undef"
$ d_mblen="undef"
$ d_mktime="undef"
$ ENDIF
$ d_stdio_ptr_lval_sets_cnt="undef"
$ d_stdio_ptr_lval_nochange_cnt="define"
+$ usefaststdio="undef"
$!
$! Sockets?
-$ if Has_Socketshr .OR. Has_Dec_C_Sockets
+$ if Has_Dec_C_Sockets
$ THEN
$ d_vms_do_sockets="define"
$ d_htonl="define"
$ d_socket="define"
+$ d_sockpair = "undef"
+$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX")
+$ then
+$ echo "Found 64 bit OpenVMS 8.2, will build with socketpair support"
+$ d_sockpair = "define"
+$ endif
$ d_select="define"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ d_vms_do_sockets="undef"
$ d_htonl="undef"
$ d_socket="undef"
+$ d_socketpair = "undef"
$ d_select="undef"
$ netdb_hlen_type="int"
$ netdb_host_type="char *"
$ THEN
$ ivtype = "''i64type'"
$ uvtype = "''u64type'"
-$ nvtype="long double"
$ ELSE
$ i64size="undef"
$ u64size="undef"
$ ENDIF
$!
+$ IF uselongdouble .OR. uselongdouble .EQS. "define"
+$ THEN
+$ nvtype="long double"
+$ ENDIF
+$!
$ tmp = "''ivtype'"
$ GOSUB type_size_check
$ ivsize = tmp
$ echo "(UV will be ""''uvtype'"", ''uvsize' bytes)"
$ echo "(NV will be ""''nvtype'"", ''nvsize' bytes)"
$!
-$ echo4 "Checking whether your NVs can preserve your UVs..."
+$ d_nv_preserves_uv = "undef"
+$ echo4 "Checking how many bits of your UVs your NVs can preserve..."
$ OS
$ WS "#if defined(__DECC) || defined(__DECCXX)"
$ WS "#include <stdlib.h>"
$ WS "#endif"
$ WS "#include <stdio.h>"
$ WS "int main() {"
-$ WS " ''uvtype' k = (''uvtype')~0, l;"
-$ WS " ''nvtype' d;"
-$ WS " l = k;"
-$ WS " d = (''nvtype')l;"
-$ WS " l = (''uvtype')d;"
-$ WS " if (l == k)"
-$ WS " printf(""preserve\n"");"
+$ WS " ''uvtype' u = 0;"
+$ WS " int n = 8 * ''uvsize';"
+$ WS " int i;"
+$ WS " for (i = 0; i < n; i++) {"
+$ WS " u = u << 1 | (''uvtype')1;"
+$ WS " if ((''uvtype')(''nvtype')u != u)"
+$ WS " break;"
+$ WS " }"
+$ WS " printf(""%d\n"", i);"
$ WS " exit(0);"
$ WS "}"
$ CS
$ GOSUB compile
-$ IF tmp .EQS. "preserve"
-$ THEN
+$ nv_preserves_uv_bits = tmp
+$ IF F$INTEGER(nv_preserves_uv_bits) .GE. (F$INTEGER(uvsize) * 8)
+$ THEN
$ d_nv_preserves_uv = "define"
-$ echo "Yes, they can."
-$ nv_preserves_uv_bits = F$STRING(F$INTEGER(uvsize) * 8)
+$ echo "Your NVs can preserve all ''nv_preserves_uv_bits' bits of your UVs."
$ ELSE
-$ d_nv_preserves_uv = "undef"
-$ echo "No, they can't."
-$ echo4 "Checking how many bits of your UVs your NVs can preserve..."
-$ OS
-$ WS "#if defined(__DECC) || defined(__DECCXX)"
-$ WS "#include <stdlib.h>"
-$ WS "#endif"
-$ WS "#include <stdio.h>"
-$ WS "int main() {"
-$ WS " ''uvtype' u = 0;"
-$ WS " int n = 8 * ''uvsize';"
-$ WS " int i;"
-$ WS " for (i = 0; i < n; i++) {"
-$ WS " u = u << 1 | (''uvtype')1;"
-$ WS " if ((''uvtype')(''nvtype')u != u)"
-$ WS " break;"
-$ WS " }"
-$ WS " printf(""%d\n"", i);"
-$ WS " exit(0);"
-$ WS "}"
-$ CS
-$ GOSUB compile
-$ nv_preserves_uv_bits = tmp
+$ d_nv_preserves_uv = "undef""
+$ echo "Your NVs can preserve only ''nv_preserves_uv_bits' bits of your UVs."
+$ ENDIF
+$!
+$ nv_overflows_integers_at = "0"
+$ echo4 "Checking to find the largest integer value your NVs can hold..."
+$ OS
+$ WS "#include <stdio.h>"
+$ WS ""
+$ WS "typedef ''nvtype' NV;"
+$ WS ""
+$ WS "int"
+$ WS "main() {"
+$ WS " NV value = 2;"
+$ WS " int count = 1;"
+$ WS ""
+$ WS " while(count < 256) {"
+$ WS " volatile NV up = value + 1.0;"
+$ WS " volatile NV negated = -value;"
+$ WS " volatile NV down = negated - 1.0;"
+$ WS " volatile NV got_up = up - value;"
+$ WS " int up_good = got_up == 1.0;"
+$ WS " int got_down = down - negated;"
+$ WS " int down_good = got_down == -1.0;"
+$ WS ""
+$ WS " if (down_good != up_good) {"
+$ WS " fprintf(stderr,"
+$ WS " ""Inconsistency - up %d %f; down %d %f; for 2**%d (%.20f)\n"","
+$ WS " up_good, (double) got_up, down_good, (double) got_down,"
+$ WS " count, (double) value);"
+$ WS " return 1;"
+$ WS " }"
+$ WS " if (!up_good) {"
+$ WS " while (1) {"
+$ WS " if (count > 8) {"
+$ WS " count -= 8;"
+$ WS " fputs(""256.0"", stdout);"
+$ WS " } else {"
+$ WS " count--;"
+$ WS " fputs(""2.0"", stdout);"
+$ WS " }"
+$ WS " if (!count) {"
+$ WS " puts("""");"
+$ WS " return 0;"
+$ WS " }"
+$ WS " fputs(""*"", stdout);"
+$ WS " }"
+$ WS " }"
+$ WS " value *= 2;"
+$ WS " ++count;"
+$ WS " }"
+$ WS " fprintf(stderr, ""Cannot overflow integer range, even at 2**%d (%.20f)\n"","
+$ WS " count, (double) value);"
+$ WS " return 1;"
+$ WS "}"
+$ CS
+$ GOSUB compile
+$ IF F$LENGTH(tmp) .GT. 0
+$ THEN
+$ IF F$EXTRACT(0,1,tmp) .EQS. "2"
+$ THEN
+$ echo "The largest integer your NVs can preserve is equal to ''tmp'"
+$ nv_overflows_integers_at = tmp
+$ ELSE
+$ echo "Cannot determine the largest integer value your NVs can hold, unexpected output"
+$ echo "''tmp'"
+$ ENDIF
+$ ELSE
+$ echo "Cannot determine the largest integer value your NVs can hold"
+$ ENDIF
+$!
+$! Check for signbit (must already know nvtype)
+$!
+$ echo4 "Checking to see if you have signbit() available to work on ''nvtype'..."
+$ OS
+$ WS "#if defined(__DECC) || defined(__DECCXX)"
+$ WS "#include <stdlib.h>"
+$ WS "#endif"
+$ WS "#include <fp.h>"
+$ WS "#include <stdio.h>"
+$ WS "int main()"
+$ WS "{"
+$ WS " ''nvtype' x = 0.0;"
+$ WS " ''nvtype' y = -0.0;"
+$ WS " if ((signbit(x) == 0) && (signbit(y) != 0))"
+$ WS " printf(""1\n"");"
+$ WS " else"
+$ WS " printf(""0\n"");"
+$ WS "}"
+$ CS
+$ GOSUB compile
+$ IF tmp .EQS. "1"
+$ THEN
+$ d_signbit = "define"
+$ echo4 "Yes."
+$ ELSE
+$ d_signbit = "undef"
+$ echo4 "Nope."
$ ENDIF
$!
$ echo4 "Checking if kill() uses SYS$FORCEX or can't be called from a signal handler..."
$ WS " printf(""%d\n"",iss);"
$ WS "}"
$ CS
+$ ON ERROR THEN CONTINUE
$ GOSUB compile
$ IF tmp .EQS. "1"
$ THEN
$ echo4 "Yep, we can."
$ kill_by_sigprc = "define"
$!
-$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
-$! sigusr1 and sigusr2 show up in VMS6.2 and later
+$! Use the same list of signals the CRTL does for recent systems, but cook our own for very old systems.
+$! Note that the list controls what signals can be caught by name as well as what can be raised via kill().
$!
-$ if vms_ver .GES. "6.2"
-$ then
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2"",0"
-$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
-$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0"
-$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 10 12 13 14 15 6 16 17"",0"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,10,12,13,14,15,6,16,17,0"
-$ sig_size="19"
-$ else
-$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT"",0"
+$ if vms_ver .LTS. "6.2"
+$ then
+$! since SIGBUS and SIGSEGV indistinguishable, make them the same here.
+$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT"
$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS"","
$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",0"
$ sig_name_init = psnwc1 + psnwc2
-$ sig_num="0 1 2 3 4 5 6 7 8 9 10 10 12 13 14 15 6"",0"
-$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,10,12,13,14,15,6,0"
+$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6"
+$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,0"
$ sig_size="17"
+$ sig_count="15"
$ endif
$ ELSE
$ echo4 "Nope, we can't."
$ WC "# Configuration by : " + cf_by
$ WC "# Target system : " + myuname
$ WC ""
-$ WC "CONFIG='true'"
$ WC "Makefile_SH='" + Makefile_SH + "'"
$ WC "Mcc='" + Mcc + "'"
$ WC "PERL_REVISION='" + revision + "'"
$ WC "PERL_VERSION='" + patchlevel + "'"
$ WC "PERL_SUBVERSION='" + subversion + "'"
+$ WC "PERL_API_REVISION='" + api_revision + "'"
$ WC "PERL_API_VERSION='" + api_version + "'"
$ WC "PERL_API_SUBVERSION='" + api_subversion + "'"
+$ WC "PERL_PATCHLEVEL='" + perl_patchlevel + "'"
+$ WC "perl_patchlevel='" + perl_patchlevel + "'"
+$ WC "PERL_CONFIG_SH='true'"
$ WC "_a='" + lib_ext + "'"
$ WC "_exe='" + exe_ext + "'"
$ WC "_o='" + obj_ext + "'"
$ WC "alignbytes='" + alignbytes + "'"
$ WC "aphostname='write sys$output f$edit(f$getsyi(\""SCSNODE\""),\""TRIM,LOWERCASE\"")'"
+$ WC "api_revision='" + api_revision + "'"
+$ WC "api_subversion='" + api_subversion + "'"
+$ WC "api_version='" + api_version + "'"
+$ WC "api_versionstring='" + version + "'"
$ WC "ar='" + "'"
$ WC "archlib='" + archlib + "'"
$ WC "archlibexp='" + archlibexp + "'"
$ WC "cc='" + perl_cc + "'"
$ WC "cccdlflags='" + cccdlflags + "'"
$ WC "ccdlflags='" + ccdlflags + "'"
-$ WC "ccflags='" + ccflags + "'"
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ IF usestdstat .OR. usestdstat .EQS. "define"
+$ THEN
+$ ccdefines = "_USE_STD_STAT=1"
+$ ELSE
+$ ccdefines = "_LARGEFILE=1"
+$ ENDIF
+$ ELSE
+$ ccdefines = ""
+$ ENDIF
+$ IF ccdefines .NES. ""
+$ THEN
+$ WC "ccflags='" + ccflags + "/Define=" + ccdefines + "'"
+$ ELSE
+$ WC "ccflags='" + ccflags + "'"
+$ ENDIF
+$ WC "ccflags_uselargefiles='" + "'"
$ WC "ccname='" + ccname + "'"
$ WC "ccversion='" + ccversion + "'"
$ WC "cf_by='" + cf_by + "'"
$ WC "cf_email='" + cf_email + "'"
$ WC "cf_time='" + cf_time + "'"
+$ WC "charbits='8'"
$ WC "config_args='" + config_args + "'"
$ WC "config_sh='" + config_sh + "'"
$ WC "cpp_stuff='" + cpp_stuff + "'"
$ ELSE
$ WC "d_Gconvert='my_gconvert(x,n,t,b)'"
$ ENDIF
-$ WC "d_PRIEldbl='" + d_PRIEUldbl + "'"
-$ WC "d_PRIFldbl='" + d_PRIFUldbl + "'"
-$ WC "d_PRIGldbl='" + d_PRIGUldbl + "'"
+$ WC "d_PRIEUldbl='" + d_PRIEUldbl + "'"
+$ WC "d_PRIFUldbl='" + d_PRIFUldbl + "'"
+$ WC "d_PRIGUldbl='" + d_PRIGUldbl + "'"
$ WC "d_PRIXU64='" + d_PRIXU64 + "'"
$ WC "d_PRId64='" + d_PRId64 + "'"
$ WC "d_PRIeldbl='" + d_PRIeldbl + "'"
$ WC "d_PRIfldbl='" + d_PRIfldbl + "'"
$ WC "d_PRIgldbl='" + d_PRIgldbl + "'"
+$ WC "d_PRIi64='" + d_PRIi64 + "'"
$ WC "d_PRIo64='" + d_PRIo64 + "'"
$ WC "d_PRIu64='" + d_PRIu64 + "'"
$ WC "d_PRIx64='" + d_PRIx64 + "'"
$ WC "d__fwalk='undef'"
$ WC "d_access='" + d_access + "'"
$ WC "d_accessx='undef'"
+$ WC "d_aintl='undef'"
$ WC "d_alarm='define'"
$ WC "d_archlib='define'"
+$ WC "d_asctime64='undef'"
$ WC "d_atolf='" + d_atolf + "'"
$ WC "d_atoll='" + d_atoll + "'"
-$ WC "d_attribut='" + d_attribut + "'"
+$ WC "d_attribute_format='" + d_attribut + "'"
+$ WC "d_attribute_deprecated='undef'"
+$ WC "d_attribute_malloc='undef'"
+$ WC "d_attribute_nonnull='undef'"
+$ WC "d_attribute_noreturn='undef'"
+$ WC "d_attribute_pure='undef'"
+$ WC "d_attribute_unused='undef'"
+$ WC "d_attribute_warn_unused_result='undef'"
+$ WC "d_prctl='undef'"
+$ WC "d_prctl_set_name='undef'"
+$ WC "d_printf_format_null='undef'"
$ WC "d_bcmp='" + d_bcmp + "'"
$ WC "d_bcopy='" + d_bcopy + "'"
$ WC "d_bincompat3='undef'"
$! WC "d_bsdpgrp='undef'"
$ WC "d_bsdgetpgrp='undef'"
$ WC "d_bsdsetpgrp='undef'"
+$ WC "d_builtin_choose_expr='undef'" ! GCC only
+$ WC "d_builtin_expect='undef'" ! GCC only
$ WC "d_bzero='" + d_bzero + "'"
$ WC "d_casti32='define'"
$ WC "d_castneg='define'"
$ WC "d_class='undef'"
$ WC "d_cmsghdr_s='undef'"
$ WC "d_const='define'"
+$ WC "d_copysignl='define'"
+$ WC "d_cplusplus='" + d_cplusplus + "'"
$ WC "d_crypt='define'"
$ WC "d_csh='undef'"
+$ WC "d_ctermid='define'"
+$ WC "d_ctime64='undef'"
$ WC "d_cuserid='define'"
+$ WC "d_c99_variadic_macros='undef'"
$ WC "d_dbl_dig='define'"
$ WC "d_dbminitproto='undef'"
$ WC "d_difftime='define'"
+$ WC "d_difftime64='undef'"
+$ WC "d_dir_dd_fd='undef'"
$ WC "d_dirfd='undef'"
$ WC "d_dirnamlen='define'"
$ WC "d_dlerror='undef'"
$ WC "d_fpos64_t='" + d_fpos64_t + "'"
$ WC "d_frexpl='" + d_frexpl + "'"
$ WC "d_fs_data_s='undef'"
-$ WC "d_fseeko='undef'"
+$ WC "d_fseeko='" + d_fseeko + "'"
$ WC "d_fsetpos='define'"
$ WC "d_fstatfs='undef'"
-$ WC "d_fstatvfs='undef'"
+$ WC "d_fstatvfs='" + d_fstatvfs + "'"
$ WC "d_fsync='undef'"
-$ WC "d_ftello='undef'"
+$ WC "d_ftello='" + d_ftello + "'"
+$ WC "d_futimes='undef'"
+$ WC "d_gdbmndbm_h_uses_prototypes='undef'"
+$ WC "d_gdbm_ndbm_h_uses_prototypes='undef'"
+$ WC "d_getaddrinfo='undef'"
$ WC "d_getcwd='define'"
$ WC "d_getespwnam='undef'"
$ WC "d_getfsstat='undef'"
$ WC "d_getlogin='define'"
$ WC "d_getmnt='undef'"
$ WC "d_getmntent='undef'"
+$ WC "d_getnameinfo='undef'"
$ WC "d_getnbyaddr='" + d_getnbyaddr + "'"
$ WC "d_getnbyname='" + d_getnbyname + "'"
$ WC "d_getnent='" + d_getnent + "'"
$ WC "d_getpbyname='" + d_getpbyname + "'"
$ WC "d_getpbynumber='" + d_getpbynumber + "'"
$ WC "d_getpent='" + d_getpent + "'"
-$ WC "d_getpgid='undef'"
+$ WC "d_getpgid='" + d_getpgid + "'"
$ WC "d_getpgrp2='undef'"
-$ WC "d_getpgrp='undef'"
-$ WC "d_getppid='undef'"
+$ WC "d_getpgrp='" + d_getpgrp + "'"
+$ WC "d_getppid='" + d_getppid + "'"
$ WC "d_getprior='undef'"
$ WC "d_getprotoprotos='" + d_getprotoprotos + "'"
$ WC "d_getprpwnam='undef'"
$ WC "d_getservprotos='" + d_getservprotos + "'"
$ WC "d_getspnam='undef'"
$ WC "d_gettimeod='" + d_gettimeod + "'"
+$ WC "d_gmtime64='undef'"
$ WC "d_gnulibc='undef'"
$ WC "d_grpasswd='undef'"
$ WC "d_hasmntopt='undef'"
$ WC "d_htonl='" + d_htonl + "'"
+$ WC "d_ilogbl='undef'"
+$ WC "d_inc_version_list='undef'"
$ WC "d_index='" + d_index + "'"
$ WC "d_inetaton='undef'"
+$ WC "d_inetntop='undef'"
+$ WC "d_inetpton='undef'"
$ WC "d_int64_t='" + d_int64_t + "'"
$ WC "d_isascii='define'"
$ WC "d_isfinite='undef'"
$ WC "d_isnan='" + d_isnan + "'"
$ WC "d_isnanl='" + d_isnanl + "'"
$ WC "d_killpg='undef'"
-$ WC "d_lchown='undef'"
+$ WC "d_lchown='" + d_lchown + "'"
$ WC "d_ldbl_dig='define'"
-$ WC "d_link='undef'"
+$ WC "d_libm_lib_version='undef'"
+$ WC "d_link='" + d_link + "'"
$ WC "d_llseek='undef'"
+$ WC "d_localtime64='undef'"
$ WC "d_locconv='" + d_locconv + "'"
$ WC "d_lockf='undef'"
$ WC "d_longdbl='" + d_longdbl + "'"
$ WC "d_longlong='" + d_longlong + "'"
$ WC "d_lseekproto='define'"
-$ WC "d_lstat='undef'"
+$ WC "d_lstat='" + d_lstat + "'"
$ WC "d_madvise='undef'"
+$ WC "d_malloc_size='undef'"
+$ WC "d_malloc_good_size='undef'"
$ WC "d_mblen='" + d_mblen + "'"
$ WC "d_mbstowcs='" + d_mbstowcs + "'"
$ WC "d_mbtowc='" + d_mbtowc + "'"
$ WC "d_mkstemp='" + d_mkstemp + "'"
$ WC "d_mkstemps='" + d_mkstemps + "'"
$ WC "d_mktime='" + d_mktime + "'"
+$ WC "d_mktime64='undef'"
$ WC "d_mmap='" + d_mmap + "'"
$ WC "d_modfl='" + d_modfl + "'"
+$ WC "d_modflproto='" + d_modflproto + "'"
$ WC "d_modfl_pow32_bug='undef'"
$ WC "d_mprotect='" + d_mprotect + "'"
$ WC "d_msg='undef'"
$ WC "d_msync='" + d_msync + "'"
$ WC "d_munmap='" + d_munmap + "'"
$ WC "d_mymalloc='" + d_mymalloc + "'"
+$ WC "d_nanosleep='" + d_nanosleep + "'"
+$ WC "d_ndbm_h_uses_prototypes='undef'"
$ WC "d_nice='define'"
$ WC "d_nl_langinfo='" + d_nl_langinfo + "'"
$ WC "d_nv_preserves_uv='" + d_nv_preserves_uv + "'"
+$ WC "nv_overflows_integers_at='" + nv_overflows_integers_at + "'"
$ WC "nv_preserves_uv_bits='" + nv_preserves_uv_bits + "'"
+$ WC "d_nv_zero_is_allbits_zero='define'"
$ WC "d_off64_t='" + d_off64_t + "'"
$ WC "d_old_pthread_create_joinable='" + d_old_pthread_create_joinable + "'"
$ WC "d_oldarchlib='define'"
$ WC "d_perl_otherlibdirs='undef'"
$ WC "d_phostname='" + d_phostname + "'"
$ WC "d_pipe='define'"
-$ WC "d_poll='undef'"
+$ WC "d_poll='" + d_poll + "'"
$ WC "d_procselfexe='undef'"
+$ WC "d_pseudofork='undef'"
$ WC "d_pthread_atfork='undef'"
+$ WC "d_pthread_attr_setscope='" + d_pthread_attr_setscope + "'"
$ WC "d_pthread_yield='" + d_pthread_yield + "'"
$ WC "d_pthreads_created_joinable='" + d_pthreads_created_joinable + "'"
$ WC "d_pwage='undef'"
$ WC "d_qgcvt='undef'"
$ WC "d_quad='" + d_quad + "'"
$ WC "d_readdir='define'"
-$ WC "d_readlink='undef'"
+$ WC "d_readlink='" + d_readlink + "'"
$ WC "d_readv='undef'"
-$ WC "d_realpath='undef'"
+$ WC "d_realpath='" + d_realpath + "'"
$ WC "d_recvmsg='undef'"
$ WC "d_rename='define'"
$ WC "d_rewinddir='define'"
$ WC "d_safemcpy='define'"
$ WC "d_sanemcmp='define'"
$ WC "d_sbrkproto='define'"
+$ WC "d_scalbnl='undef'"
$ WC "d_sched_yield='" + d_sched_yield + "'"
$ WC "d_scm_rights='undef'"
$ WC "d_seekdir='define'"
$ WC "d_sendmsg='undef'"
$ WC "d_setegid='undef'"
$ WC "d_setenv='" + d_setenv + "'"
-$ WC "d_seteuid='undef'"
-$ WC "d_setgrent='undef'"
+$ WC "d_seteuid='" + d_seteuid + "'"
+$ WC "d_setgrent='" + d_setgrent + "'"
$ WC "d_setgrps='undef'"
$ WC "d_sethent='" + d_sethent + "'"
$ WC "d_setitimer='" + d_setitimer + "'"
$ WC "d_setlocale='" + d_setlocale + "'"
$ WC "d_setnent='" + d_setnent + "'"
$ WC "d_setpent='" + d_setpent + "'"
-$ WC "d_setpgid='undef'"
+$ WC "d_setpgid='" + d_setpgid + "'"
$ WC "d_setpgrp2='undef'"
-$ WC "d_setpgrp='undef'"
+$ WC "d_setpgrp='" + d_setpgrp + "'"
$ WC "d_setprior='undef'"
$ WC "d_setproctitle='" + d_setproctitle + "'"
$ WC "d_setpwent='define'"
-$ WC "d_setregid='undef'"
+$ WC "d_setregid='" + d_setregid + "'"
$ WC "d_setresgid='undef'"
$ WC "d_setresuid='undef'"
-$ WC "d_setreuid='undef'"
+$ WC "d_setreuid='" + d_setreuid + "'"
$ WC "d_setrgid='undef'"
$ WC "d_setruid='undef'"
$ WC "d_setsent='" + d_setsent + "'"
-$ WC "d_setsid='undef'"
+$ WC "d_setsid='" + d_setsid + "'"
$ WC "d_setvbuf='" + d_setvbuf + "'"
$ WC "d_sfio='undef'"
$ WC "d_shm='undef'"
$ WC "d_shmatprototype='undef'"
$ WC "d_sigaction='" + d_sigaction + "'"
+$ WC "d_signbit='" + d_signbit + "'"
$ WC "d_sigprocmask='" + d_sigprocmask + "'"
$ WC "d_sigsetjmp='" + d_sigsetjmp + "'"
+$ WC "d_sin6_scope_id='" + d_sin6_scope_id + "'"
+$ WC "d_sitearch='define'"
+$ WC "d_sockaddr_sa_len='" + d_sockaddr_sa_len + "'"
$ WC "d_sockatmark='undef'"
$ WC "d_sockatmarkproto='undef'"
$ WC "d_socket='" + d_socket + "'"
$ WC "d_socklen_t='" + d_socklen_t + "'"
-$ WC "d_sockpair='undef'"
+$ WC "d_sockpair='" + d_sockpair + "'"
$ WC "d_socks5_init='undef'"
+$ WC "d_sprintf_returns_strlen='define'"
$ WC "d_sqrtl='define'"
$ WC "d_sresgproto='undef'"
$ WC "d_sresgproto='undef'"
$ WC "d_statfs_f_flags='undef'"
$ WC "d_statfs_s='undef'"
$ WC "d_statfsflags='undef'"
+$ WC "d_static_inline='define'"
$ WC "d_stdio_cnt_lval='" + d_stdio_cnt_lval + "'"
$ WC "d_stdio_ptr_lval='" + d_stdio_ptr_lval + "'"
$ WC "d_stdio_ptr_lval_nochange_cnt='" + d_stdio_ptr_lval_nochange_cnt + "'"
$ WC "d_stdio_stream_array='undef'"
$ WC "d_stdiobase='" + d_stdiobase + "'"
$ WC "d_stdstdio='" + d_stdstdio + "'"
+$ WC "d_faststdio='" + d_faststdio + "'"
$ WC "d_strchr='define'"
$ WC "d_strcoll='" + d_strcoll + "'"
$ WC "d_strctcpy='define'"
$ WC "d_strerrm='strerror((e),vaxc$errno)'"
$ WC "d_strerror='define'"
$ WC "d_strftime='define'"
+$ WC "d_strlcat='undef'"
+$ WC "d_strlcpy='undef'"
$ WC "d_strtod='define'"
$ WC "d_strtol='define'"
$ WC "d_strtold='" + d_strtold + "'"
$ WC "d_strtoll='" + d_strtoll + "'"
-$ WC "d_strtoq='define'"
+$ WC "d_strtoq='" + d_strtoq + "'"
$ WC "d_strtoul='define'"
$ WC "d_strtoull='" + d_strtoull + "'"
$ WC "d_strtouq='" + d_strtouq + "'"
$ WC "d_strxfrm='" + d_strxfrm + "'"
$ WC "d_suidsafe='undef'"
-$ WC "d_symlink='undef'"
+$ WC "d_symlink='" + d_symlink + "'"
$ WC "d_syscall='undef'"
$ WC "d_syscallproto='undef'"
$ WC "d_sysconf='" + d_sysconf + "'"
$ WC "d_telldir='define'"
$ WC "d_telldirproto='define'"
$ WC "d_time='define'"
+$ WC "d_timegm='undef'"
$ WC "d_times='define'"
$ IF ("''F$EXTRACT(1,3, F$GETSYI(""VERSION""))'".GES."7.0")
$ THEN
$ WC "d_umask='define'"
$ WC "d_uname='" + d_uname + "'"
$ WC "d_union_semun='undef'"
-$ WC "d_unlink_all_versions='undef'"
+$ WC "d_unlink_all_versions='" + d_unlink_all_versions + "'" ! VMS-specific
$ WC "d_unordered='undef'"
+$ WC "d_unsetenv='" + d_unsetenv + "'"
+$ WC "d_clearenv='" + d_clearenv + "'"
$ WC "d_usleep='" + d_usleep + "'"
$ WC "d_usleepproto='" + d_usleep + "'"
$ WC "d_ustat='undef'"
$ WC "d_vfork='define'"
$ WC "d_vms_case_sensitive_symbols='" + d_vms_be_case_sensitive + "'" ! VMS
$ WC "d_vms_do_sockets='" + d_vms_do_sockets + "'" ! VMS
+$ WC "d_vms_shorten_long_symbols='" + d_vms_shorten_long_symbols + "'" ! VMS
$ WC "d_void_closedir='define'"
$ WC "d_volatile='define'"
$ WC "d_vprintf='define'"
+$ WC "d_vsnprintf='" + d_vsnprintf + "'"
$ WC "d_wait4='" + d_wait4 + "'"
$ WC "d_waitpid='define'"
$ WC "d_wcstombs='" + d_wcstombs + "'"
$ WC "dlsrc='dl_vms.c'"
$ WC "doublesize='" + doublesize + "'"
$ WC "drand01='" + drand01 + "'"
+$ WC "dtrace='" + "'"
$!
-$! The extensions symbol may be quite long
+$! The dynamic_ext symbol may be quite long
$!
-$ tmp = "dynamic_ext='" + extensions + "'"
+$ tmp = "dynamic_ext='" + dynamic_ext + "'"
$ WC/symbol tmp
$ DELETE/SYMBOL tmp
$ WC "eagain=' '"
$ WC "eunicefix=':'"
$ WC "exe_ext='" + exe_ext + "'"
$!
-$! The extensions symbol may be quite long
+$! The extensions symbols may be quite long
$!
-$ tmp = "extensions='" + extensions + "'"
-$ WC/symbol tmp
-$ DELETE/SYMBOL tmp
+$ WC/symbol "extensions='", nonxs_ext, " ", nonxs_ext2, " ", dynamic_ext, "'"
$ WC "fflushNULL='define'"
$ WC "fflushall='undef'"
$ WC "fpostype='fpos_t'"
$ WC "i8size='" + i8size + "'"
$ WC "i8type='" + i8type + "'"
$ WC "i_arpainet='undef'"
+$ WC "i_assert='define'"
$ WC "i_crypt='undef'"
$ WC "i_db='undef'"
$ WC "i_dbm='undef'"
$ WC "i_float='define'"
$ WC "i_fp='undef'"
$ WC "i_fp_class='undef'"
-$ WC "i_grp='undef'"
+$ WC "i_gdbm='undef'"
+$ WC "i_gdbm_ndbm='undef'"
+$ WC "i_gdbmndbm='undef'"
+$ WC "i_grp='" + i_grp + "'"
$ WC "i_ieeefp='undef'"
$ WC "i_inttypes='" + i_inttypes + "'"
$ WC "i_langinfo='" + i_langinfo + "'"
$ WC "i_locale='" + i_locale + "'"
$ WC "i_machcthr='undef'"
$ WC "i_machcthreads='undef'"
+$ WC "i_mallocmalloc='undef'"
$ WC "i_math='define'"
$ WC "i_memory='undef'"
$ WC "i_mntent='undef'"
$ WC "i_shadow='" + i_shadow + "'"
$ WC "i_socks='" + i_socks + "'"
$ WC "i_stdarg='define'"
+$ IF (ccname .EQS. "DEC") .AND. (F$INTEGER(Dec_C_Version).GE.60400000)
+$ THEN
+$ WC "i_stdbool='define'"
+$ ELSE
+$ WC "i_stdbool='undef'"
+$ ENDIF
$ WC "i_stddef='define'"
$ WC "i_stdlib='define'"
$ WC "i_string='define'"
$ WC "i_sysaccess='" + i_sysaccess + "'"
$ WC "i_sysdir='undef'"
$ WC "i_sysfile='" + i_sysfile + "'"
-$ WC "i_sysioctl='undef'"
+$ WC "i_sysioctl='" + i_sysioctl + "'"
$ WC "i_syslog='" + i_syslog + "'"
$ WC "i_sysmman='undef'"
$ WC "i_sysmode='" + i_sysmode + "'"
$ WC "i_sysmount='undef'"
$ WC "i_sysndir='undef'"
$ WC "i_sysparam='undef'"
+$ WC "i_syspoll='" + i_syspoll + "'"
$ WC "i_sysresrc='undef'"
$ WC "i_syssecrt='" + i_syssecrt + "'"
$ WC "i_sysselct='undef'"
$ WC "i_syssockio='undef'"
$ WC "i_sysstat='define'"
$ WC "i_sysstatfs='undef'"
-$ WC "i_sysstatvfs='undef'"
+$ WC "i_sysstatvfs='" + i_sysstatvfs + "'"
$ WC "i_systime='undef'"
$ WC "i_systimek='undef'"
$ WC "i_systimes='undef'"
$ WC "i_time='define'"
$ WC "i_unistd='" + i_unistd + "'"
$ WC "i_ustat='undef'"
-$ WC "i_utime='undef'"
+$ WC "i_utime='" + i_utime + "'"
$ WC "i_values='undef'"
$ WC "i_varargs='undef'"
$ WC "i_vfork='undef'"
$ WC "ld='" + ld + "'"
$ WC "lddlflags='/Share'"
$ WC "ldflags='" + ldflags + "'"
+$ WC "ldflags_uselargefiles='" + "'"
$ WC "lib_ext='" + lib_ext + "'"
$ WC "libc='" + libc + "'"
$ WC "libpth='/sys$share /sys$library'"
$ WC "libs='" + libs + "'"
+$ WC "libswanted='" + "'"
+$ WC "libswanted_uselargefiles='" + "'"
$ WC "longdblsize='" + longdblsize + "'"
$ WC "longlongsize='" + longlongsize + "'"
$ WC "longsize='" + longsize + "'"
-$ WC "lseeksize='4'"
-$ WC "lseektype='int'"
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ WC "lseeksize='8'"
+$ WC "lseektype='off_t'"
+$ ELSE
+$ WC "lseeksize='4'"
+$ WC "lseektype='int'"
+$ ENDIF
$ WC "mab='" + "'"
+$ WC "mad='undef'"
$ WC "make='" + make + "'"
$ WC "malloctype='void *'"
+$ WC "usemallocwrap='" + usemallocwrap + "'"
$ WC "man1ext='rno'"
$ WC "man3ext='rno'"
$ WC "mmaptype='void *'"
$ WC "netdb_host_type='" + netdb_host_type + "'"
$ WC "netdb_name_type='" + netdb_name_type + "'"
$ WC "netdb_net_type='" + netdb_net_type + "'"
+$ WC/symbol "nonxs_ext='", nonxs_ext, " ", nonxs_ext2, "'"
$ WC "nveformat='" + nveformat + "'"
+$ WC "nvEUformat='" + nvEUformat + "'"
$ WC "nvfformat='" + nvfformat + "'"
+$ WC "nvFUformat='" + nvFUformat + "'"
$ WC "nvgformat='" + nvgformat + "'"
+$ WC "nvGUformat='" + nvGUformat + "'"
$ WC "nvsize='" + nvsize + "'"
$ WC "nvtype='" + nvtype + "'"
$ WC "o_nonblock=' '"
$ WC "perl_root='" + perl_root + "'" ! VMS specific $trnlnm()
$ WC "perladmin='" + perladmin + "'"
$ WC "perllibs='" + perllibs + "'"
-$ WC "perlpath='" + "''vms_prefix':[000000]Perl''ext'" + "'"
+$ WC "perlpath='" + "''vms_prefix':[000000]Perl''exe_ext'" + "'"
+$ WC "perl_static_inline='static inline'"
$ WC "perl_symbol='" + perl_symbol + "'" ! VMS specific
$ WC "perl_verb='" + perl_verb + "'" ! VMS specific
$ WC "pgflquota='" + pgflquota + "'"
$ WC "pidtype='" + pidtype + "'"
-$ WC "pm_apiversion='" + version + "'"
$ WC "prefix='" + vms_prefix + "'"
$ WC "prefixexp='" + vms_prefix + ":'"
$ WC "privlib='" + privlib + "'"
$ WC "ptrsize='" + ptrsize + "'"
$ WC "quadkind='" + quadkind + "'"
$ WC "quadtype='" + quadtype + "'"
-$ WC "randbits='31'"
+$ WC "randbits='" + randbits + "'"
+$ WC "randfunc='" + randfunc + "'"
$ WC "randseedtype='" + randseedtype + "'"
$ WC "ranlib='" + "'"
$ WC "rd_nodata=' '"
$ WC "revision='" + revision + "'"
+$ WC "sGMTIME_max='4294967295'"
+$ WC "sGMTIME_min='0'"
+$ WC "sLOCALTIME_max='4294967295'"
+$ WC "sLOCALTIME_min='0'"
$ WC "sPRId64='" + sPRId64 + "'"
-$ WC "sPRIEldbl='" + sPRIEUldbl + "'"
-$ WC "sPRIFldbl='" + sPRIFUldbl + "'"
-$ WC "sPRIGldbl='" + sPRIGUldbl + "'"
-$ WC "sPRIX64='" + sPRIXU64 + "'"
+$ WC "sPRIEUldbl='" + sPRIEUldbl + "'"
+$ WC "sPRIFUldbl='" + sPRIFUldbl + "'"
+$ WC "sPRIGUldbl='" + sPRIGUldbl + "'"
+$ WC "sPRIXU64='" + sPRIXU64 + "'"
$ WC "sPRIeldbl='" + sPRIeldbl + "'"
$ WC "sPRIfldbl='" + sPRIfldbl + "'"
$ WC "sPRIgldbl='" + sPRIgldbl + "'"
-$! WC "sPRIi64='" + sPRIi64 + "'"
+$ WC "sPRIi64='" + sPRIi64 + "'"
$ WC "sPRIo64='" + sPRIo64 + "'"
$ WC "sPRIu64='" + sPRIu64 + "'"
$ WC "sPRIx64='" + sPRIx64 + "'"
$ WC "selectminbits='32'"
$ WC "selecttype='" + selecttype + "'"
$ WC "sh='MCR'"
+$ WC "sharpbang='#!'"
$ WC "shmattype='" + " '"
$ WC "shortsize='" + shortsize + "'"
-$ WC "shrplib='define'"
-$ WC "sig_name='" + sig_name + "'"
-$ tmp = "sig_name_init='" + sig_name_init + "'"
-$ WC/symbol tmp
-$ DELETE/SYMBOL tmp
+$ IF (f$length(sig_name) .GE. 244)
+$ THEN
+$ tmp = "sig_name='" + sig_name + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
+$ ELSE
+$ WC "sig_name='" + sig_name + "'"
+$ ENDIF
+$ IF (f$length(sig_name_init) .GE. 244)
+$ THEN
+$ tmp = "sig_name_init='" + sig_name_init + "'"
+$ WC/symbol tmp
+$ DELETE/SYMBOL tmp
+$ ELSE
+$ WC "sig_name_init='" + sig_name_init + "'"
+$ ENDIF
$ WC "sig_num='" + sig_num + "'"
$ WC "sig_num_init='" + sig_num_init + "'"
+$ WC "sig_count='" + sig_count + "'"
$ WC "sig_size='" + sig_size + "'"
$ WC "signal_t='" + signal_t + "'"
$ WC "sitearch='" + sitearch + "'"
$ WC "ssizetype='int'"
$ WC "startperl=" + startperl ! This one's special--no enclosing single quotes
$ WC "static_ext='" + static_ext + "'"
+$ WC "st_ino_size='" + st_ino_size + "'"
+$ WC "st_ino_sign='1'"
$ WC "stdchar='" + stdchar + "'"
$ WC "stdio_base='((*fp)->_base)'"
$ WC "stdio_bufsiz='((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base)'"
$ WC "stdio_ptr='((*fp)->_ptr)'"
$ WC "stdio_stream_array=' " + "'"
$ WC "subversion='" + subversion + "'"
+$ WC "targetarch='" + "'"
$ WC "timetype='" + timetype + "'"
$ WC "u16size='" + u16size + "'"
$ WC "u16type='" + u16type + "'"
$ WC "usedebugging_perl='"+use_debugging_perl+"'"
$ WC "usedefaulttypes='" + usedefaulttypes + "'" ! VMS-specific
$ WC "usecrosscompile='undef'"
+$ WC "usedevel='" + usedevel + "'"
$ WC "usedl='" + usedl + "'"
+$ WC "usedtrace='undef'"
+$ WC "usefaststdio='" + usefaststdio + "'"
$ WC "useieee='" + useieee + "'" ! VMS-specific
$ WC "useithreads='" + useithreads + "'"
+$ WC "usekernelthreads='" + usekernelthreads + "'" ! VMS-specific
+$ WC "usekernprocpathname='undef'"
+$ WC "usensgetexecutablepath='undef'"
$ WC "uselargefiles='" + uselargefiles + "'"
$ WC "uselongdouble='" + uselongdouble + "'"
$ WC "usemorebits='" + usemorebits + "'"
$ WC "usemultiplicity='" + usemultiplicity + "'"
$ WC "usemymalloc='" + usemymalloc + "'"
-$ WC "useperlio='" + useperlio + "'"
+$ WC "useperlio='define'"
$ WC "useposix='false'"
$ WC "usereentrant='undef'"
+$ WC "userelocatableinc='undef'"
$ WC "usesecurelog='" + usesecurelog + "'" ! VMS-specific
+$ WC "useshortenedsymbols='" + useshortenedsymbols + "'" ! VMS-specific
+$ WC "useshrplib='true'"
+$ WC "usesitecustomize='" + usesitecustomize + "'"
$ WC "usesocks='undef'"
$ WC "usethreads='" + usethreads + "'"
+$ WC "usethreadupcalls='" + usethreadupcalls + "'" ! VMS-specific
$ WC "usevendorprefix='" + "'" ! try to say no, though we'll be ignored as of MM 5.90_01
$ WC "usevfork='true'"
$ WC "usevmsdebug='" + usevmsdebug + "'" ! VMS-specific
$ WC "uvxformat='" + uvxformat + "'"
$ WC "uvXUformat='" + uvXUformat + "'"
$ WC "vendorarch='" + "'"
+$ WC "vaproto='define'"
$ WC "vendorarchexp='" + "'"
$ WC "vendorbin='" + "'"
$ WC "vendorbinexp='" + "'"
$ WC "vms_prefix='" + vms_prefix + "'" ! VMS specific
$ WC "vms_ver='" + vms_ver + "'" ! VMS specific
$ WC "voidflags='15'"
-$ WC "xs_apiversion='" + version + "'"
-$ WC "PERL_CONFIG_SH='true'"
$!
$! ## The UNIXy POSIXy reentrantey thingys ##
$! See "Appendix B, Version-Dependency Tables" in the C RTL
$ WC "ctime_r_proto='0'"
$ WC "d_ctime_r='undef'"
$ ENDIF
-$ IF use_threads .AND. vms_ver .GES. "7.3-1"
-$ THEN
-$ WC "readdir_r_proto='REENTRANT_PROTO_I_TSR'"
-$ WC "d_readdir_r='define'"
-$ ELSE
-$ WC "readdir_r_proto='0'"
-$ WC "d_readdir_r='undef'"
-$ ENDIF
$ WC "d_crypt_r='undef'"
$ WC "d_ctermid_r='undef'"
$ WC "d_drand48_r='undef'"
$ WC "d_endpwent_r='undef'"
$ WC "d_endservent_r='undef'"
$ WC "d_getgrent_r='undef'"
-$ WC "d_getgrgid_r='undef'"
-$ WC "d_getgrnam_r='undef'"
+$ WC "d_getgrgid_r='" + d_getgrgid_r + "'"
+$ WC "d_getgrnam_r='" + d_getgrnam_r + "'"
$ WC "d_gethostbyaddr_r='undef'"
$ WC "d_gethostbyname_r='undef'"
$ WC "d_gethostent_r='undef'"
$ WC "d_getprotobynumber_r='undef'"
$ WC "d_getprotoent_r='undef'"
$ WC "d_getpwent_r='undef'"
-$ WC "d_getpwnam_r='undef'"
-$ WC "d_getpwuid_r='undef'"
+$ WC "d_getpwnam_r='" + d_getpwnam_r + "'"
+$ WC "d_getpwuid_r='" + d_getpwuid_r + "'"
$ WC "d_getservbyname_r='undef'"
$ WC "d_getservbyport_r='undef'"
$ WC "d_getservent_r='undef'"
$ WC "d_getspnam_r='undef'"
$ WC "d_gmtime_r='undef'" ! leave undef'd; we use my_gmtime
$ WC "d_localtime_r='undef'" ! leave undef'd; we use my_localtime
+$ WC "d_localtime_r_needs_tzset='undef'"
$ WC "d_random_r='undef'"
+$ WC "d_readdir_r='define'" ! always defined; we roll our own
$ WC "d_readdir64_r='undef'"
$ WC "d_setgrent_r='undef'"
$ WC "d_sethostent_r='undef'"
$ WC "d_setprotoent_r='undef'"
$ WC "d_setpwent_r='undef'"
$ WC "d_setservent_r='undef'"
+$ WC "d_snprintf='" + d_snprintf + "'"
$ WC "d_srand48_r='undef'"
$ WC "d_srandom_r='undef'"
$ WC "d_strerror_r='undef'"
$ WC "d_tmpnam_r='undef'"
-$ WC "d_ttyname_r='undef'"
+$ WC "d_ttyname_r='" + d_ttyname_r + "'"
$ WC "ctermid_r_proto='0'"
$ WC "crypt_r_proto='0'"
$ WC "drand48_r_proto='0'"
$ WC "endpwent_r_proto='0'"
$ WC "endservent_r_proto='0'"
$ WC "getgrent_r_proto='0'"
-$ WC "getgrgid_r_proto='0'"
-$ WC "getgrnam_r_proto='0'"
+$ WC "getgrgid_r_proto='" + getgrgid_r_proto + "'"
+$ WC "getgrnam_r_proto='" + getgrnam_r_proto + "'"
$ WC "gethostbyaddr_r_proto='0'"
$ WC "gethostbyname_r_proto='0'"
$ WC "gethostent_r_proto='0'"
$ WC "gmtime_r_proto='0'"
$ WC "localtime_r_proto='0'"
$ WC "random_r_proto='0'"
+$ WC "readdir_r_proto='REENTRANT_PROTO_I_TSR'" ! always defined; we roll our own
$ WC "readdir64_r_proto='0'"
$ WC "setgrent_r_proto='0'"
$ WC "sethostent_r_proto='0'"
$ WC "srandom_r_proto='0'"
$ WC "strerror_r_proto='0'"
$ WC "tmpnam_r_proto='0'"
-$ WC "ttyname_r_proto='0'"
+$ WC "ttyname_r_proto='" + ttyname_r_proto + "'"
$!
$! ##END WRITE NEW CONSTANTS HERE##
$!
$! Okay, we've gotten here. Build munchconfig.exe
$ COPY/NOLOG [-.vms]munchconfig.c []
$ COPY/NOLOG [-.vms]'Makefile_SH' []
-$ 'Perl_CC' munchconfig.c
+$ 'Perl_CC' 'ccflags' munchconfig.c
$ IF Needs_Opt
$ THEN
$ OPEN/WRITE CONFIG []munchconfig.opt
$ THEN
$ WC "#define VMS_DO_SOCKETS"
$ WC "#define DECCRTL_SOCKETS"
-$ ELSE
-$ IF Has_Socketshr THEN WC "#define VMS_DO_SOCKETS"
$ ENDIF
$! This is VMS-specific for now
$ WC "#''d_setenv' HAS_SETENV"
$ IF use64bitall .OR. use64bitall .EQS. "define" THEN -
WC "#define USE_64_BIT_ALL"
$ IF be_case_sensitive THEN WC "#define VMS_WE_ARE_CASE_SENSITIVE"
+$ IF shorten_long_symbols THEN WC "#define VMS_SHORTEN_LONG_SYMBOLS"
+$ IF use_ieee_math THEN WC "#define USE_IEEE"
$ IF d_herrno .EQS. "undef" THEN WC "#define NEED_AN_H_ERRNO"
$ WC "#define HAS_ENVGETENV"
$ WC "#define PERL_EXTERNAL_GLOB"
-$ IF archname .EQS. "VMS_VAX" .AND. -
+$ IF F$ELEMENT(0, "-", archname) .EQS. "VMS_VAX" .AND. -
ccname .EQS. "DEC" .AND. -
ccversion .LE. 50390006
$ THEN
$! WC "#define PERL_IGNORE_FPUSIG SIGFPE"
$ ENDIF
$ IF kill_by_sigprc .EQS. "define" then WC "#define KILL_BY_SIGPRC"
+$ IF unlink_all_versions .OR. unlink_all_versions .EQS. "define" THEN -
+ WC "#define UNLINK_ALL_VERSIONS"
+$ IF d_sockaddr_sa_len .EQS. "define" then WC "#define _SOCKADDR_LEN 1"
$ CLOSE CONFIG
$!
$ echo4 "Doing variable substitutions on .SH files..."
$ THEN
$ SOCKET_REPLACE = "SOCKET=DECC_SOCKETS=1"
$ ELSE
-$ IF Has_Socketshr
-$ THEN
-$ SOCKET_REPLACE = "SOCKET=SOCKETSHR_SOCKETS=1"
-$ ELSE
-$ SOCKET_REPLACE = "SOCKET="
-$ ENDIF
+$ SOCKET_REPLACE = "SOCKET="
$ ENDIF
$ IF use_threads
$ THEN
$ ELSE
$ MALLOC_REPLACE = "MALLOC="
$ ENDIF
+$ IF uselargefiles .OR. uselargefiles .EQS. "define"
+$ THEN
+$ IF usestdstat .or. usestdstat .eqs. "define"
+$ THEN
+$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_USE_STD_STAT=1"
+$ ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE=LARGEFILE=_LARGEFILE=1"
+$ ENDIF
+$ ELSE
+$ LARGEFILE_REPLACE = "LARGEFILE="
+$ ENDIF
+$!
+$! In order not to stress the tiny command buffer on pre-7.3-2 systems,
+$! we put the following substitutions in a file and pass the file to
+$! munchconfig.
+$!
+$ open/write CONFIG extra_subs.txt
+$ WC := write CONFIG
+$ WC "''DECC_REPLACE'"
+$ WC "''DECCXX_REPLACE'"
+$ WC "''ARCH_TYPE'"
+$ WC "''GNUC_REPLACE'"
+$ WC "''SOCKET_REPLACE'"
+$ WC "''THREAD_REPLACE'"
+$ WC "''C_Compiler_Replace'"
+$ WC "''MALLOC_REPLACE'"
+$ WC "''THREAD_UPCALLS'"
+$ WC "''THREAD_KERNEL'"
+$ WC "PV=''version'"
+$ WC "FLAGS=FLAGS=''extra_flags'"
+$ WC "''LARGEFILE_REPLACE'"
+$ WC "ARCHNAME=ARCHNAME=''archname'"
+$ close CONFIG
+$!
$ echo4 "Extracting ''defmakefile' (with variable substitutions)"
$ DEFINE/USER_MODE sys$output 'UUmakefile'
-$ mcr []munchconfig 'config_sh' 'Makefile_SH' "''DECC_REPLACE'" -
- "''DECCXX_REPLACE'" "''ARCH_TYPE'" "''GNUC_REPLACE'" "''SOCKET_REPLACE'" -
- "''THREAD_REPLACE'" "''C_Compiler_Replace'" "''MALLOC_REPLACE'" -
- "''Thread_Live_Dangerously'" "PV=''version'" "FLAGS=FLAGS=''extra_flags'"
+$ mcr []munchconfig 'config_sh' 'Makefile_SH' -f extra_subs.txt
$! Clean up after ourselves
$ DELETE/NOLOG/NOCONFIRM []munchconfig.exe;
-$!
-$ echo4 "Extracting make_ext.com (without variable substitutions)"
-$ Create Sys$Disk:[-]make_ext.com
-$ Deck/Dollar="$EndOfTpl$"
-$!++ make_ext.com
-$! NOTE: This file is extracted as part of the VMS configuration process.
-$! Any changes made to it directly will be lost. If you need to make any
-$! changes, please edit the template in Configure.Com instead.
-$ def = F$Environment("Default")
-$! p1 - how to invoke miniperl (passed in from descrip.mms)
-$ p1 = F$Edit(p1,"Upcase,Compress,Trim")
-$ If F$Locate("MCR ",p1).eq.0 Then p1 = F$Extract(3,255,p1)
-$ miniperl = "$" + F$Search(F$Parse(p1,".Exe"))
-$! p2 - how to invoke local make utility (passed in from descrip.mms)
-$ makeutil = p2
-$ if f$type('p2') .nes. "" then makeutil = 'p2'
-$! p3 - make target (passed in from descrip.mms)
-$ targ = F$Edit(p3,"Lowercase")
-$ sts = 1
-$ extensions = ""
-$ open/read CONFIG config.sh
-$ find_ext_loop:
-$ read/end=end_ext_loop CONFIG line
-$ if (f$extract(0,12,line) .NES. "extensions='")
-$ then goto find_ext_loop
-$ else extensions = f$extract(12,f$length(line),line) - "'"
-$ endif
-$ end_ext_loop:
-$ close CONFIG
-$ extensions = f$edit(extensions,"TRIM,COMPRESS")
-$ i = 0
-$ next_ext:
-$ ext = f$element(i," ",extensions)
-$ If ext .eqs. " " .or. ext .eqs. "" Then Goto done
-$ Define/User_mode Perl_Env_Tables CLISYM_LOCAL
-$ miniperl
-$ deck
- ($extdir = $ENV{'ext'}) =~ s/::/./g;
- $extdir =~ s#/#.#g;
- if ($extdir =~ /^vms/i) { $extdir =~ s/vms/.vms.ext/i; }
- else { $extdir = ".ext.$extdir"; }
- ($ENV{'extdir'} = "[$extdir]");
- ($ENV{'up'} = ('-') x ($extdir =~ tr/././));
-$ eod
-$ Set Default &extdir
-$ redesc = 0
-$ If F$Locate("clean",targ) .eqs. F$Length(targ)
-$ Then
-$ Write Sys$Output ""
-$ Write Sys$Output " Making ''ext' (dynamic)"
-$ On Error Then Goto done
-$ If F$Search("Descrip.MMS") .eqs. ""
-$ Then
-$ redesc = 1
-$ Else
-$ If F$CvTime(F$File("Descrip.MMS","rdt")) .lts. -
- F$CvTime(F$File("Makefile.PL","rdt")) Then redesc = 1
-$ EndIf
-$ Else
-$ Write Sys$Output "''targ'ing ''ext' . . ."
-$ On Error Then Continue
-$ EndIf
-$ If redesc Then -
- miniperl "-I[''up'.lib]" Makefile.PL "INST_LIB=[''up'.lib]" "INST_ARCHLIB=[''up'.lib]" "PERL_CORE=1"
-$ makeutil 'targ'
-$ i = i + 1
-$ Set Def &def
-$ Goto next_ext
-$ done:
-$ sts = $Status
-$ Set Def &def
-$ Exit sts
-$!-- make_ext.com
-$EndOfTpl$
+$ DELETE/NOLOG/NOCONFIRM []extra_subs.txt;
$!
$! Note that the /key qualifier to search, as in:
$! search README.* "=head"/key=(position=1)/window=0/output=extra.pods
$ open/read/error=extra_close EXTRA extra.pods
$extra_loop:
$ read/error=extra_close/END_OF_FILE=extra_close EXTRA file
-$ file_type = f$parse(file,,,"TYPE",) - "."
+$ file_type = f$edit(f$parse(file,,,"TYPE",),"LOWERCASE") - "."
$ if file_type .nes. "VMS" .and. file_type .nes. "vms"
$ then
$ pod_file = "[.pod]perl''file_type'.pod"
$ pod_file_rdt = f$cvtime(f$file_attributes(pod_file,"RDT"))
$ if file_rdt .GTS. pod_file_rdt then do_copy := true
$ endif
-$ if do_copy then copy/log/noconfirm 'file' 'pod_file'
+$ ! wacky method to preserve case on ODS-5 even when parse style is traditional
+$ if do_copy then mcr sys$disk:[]miniperl.exe -e "exit 0+$^E unless File::Copy::rmscopy(q{''file'}, q{''pod_file'});"
$ endif
$ endif
$ goto extra_loop
$ ENDSUBROUTINE ! Bad_environment
$ echo ""
$ echo4 "Checking for dangerous pre-existing global symbols and logical names."
-$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "COMP"
+$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "FOO"
$ CALL Bad_environment "LIB"
+$ CALL Bad_environment "LIST"
+$ CALL Bad_environment "MIME"
+$ CALL Bad_environment "POSIX"
+$ CALL Bad_environment "SYS"
$ CALL Bad_environment "T"
-$ CALL Bad_environment "FOO"
-$ CALL Bad_environment "EXT"
+$ CALL Bad_environment "THREAD"
+$ CALL Bad_environment "THREADS"
+$ CALL Bad_environment "TIME"
+$ CALL Bad_environment "TMP"
+$ CALL Bad_environment "UNICODE"
+$ CALL Bad_environment "UTIL"
$ CALL Bad_environment "TEST" "SYMBOL"
$ IF f$search("config.msg") .eqs. "" THEN echo "OK."
$!
$ echo4 "The perl.cld file is now being written..."
$ OPEN/WRITE CONFIG 'file_2_find'
$ ext = ".exe"
-$ IF (sharedperl .AND. archname .EQS. "VMS_AXP") THEN ext := .AXE
+$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP") THEN ext := .AXE
+$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_IA64") THEN ext := .IXE
$ IF (use_vmsdebug_perl)
$ THEN
$ WRITE CONFIG "define verb dbgperl"
$ WRITE CONFIG "$! This perl configured & administered by ''perladmin'"
$ ENDIF
$ WRITE CONFIG "$!"
-$ prefix = prefix - "000000."
-$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN -
- prefix = prefix - "]" + ".]"
-$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+$! HP hack to make distributing binaries easier
+$!----------------------------------------------
+$ pcsi_producer = f$trnlnm("PCSI_PRODUCER")
+$ if pcsi_producer .eqs. ""
+$ then
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' ''prefix'"
+$ else
+$ WRITE CONFIG "$ myproc = f$environment(""PROCEDURE"")"
+$ WRITE CONFIG "$ myroot_dev = f$parse(myproc,,,""DEVICE"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = f$parse(myproc,,,""DIRECTORY"",""NO_CONCEAL"")"
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000."" - ""><000000."""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""][000000]"" - ""><000000>"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - ""]["" - ""><"""
+$ WRITE CONFIG "$ myroot_dir = myroot_dir - "".]"" - "".>"" - ""["" - ""]"" - ""<"" - "">"""
+$ WRITE CONFIG "$ if f$trnlnm(""HP_BUILD_PERL_BIN_KIT"",""LNM$PROCESS_TABLE"") .EQS. """""
+$ WRITE CONFIG "$ then"
+$ WRITE CONFIG "$ define/translation=concealed ''vms_prefix' 'myroot_dev'['myroot_dir'.]"
+$ WRITE CONFIG "$ endif"
+$ endif
$ WRITE CONFIG "$ ext = "".exe"""
$ IF sharedperl
$ THEN
-$ write config "$ if f$getsyi(""HW_MODEL"") .ge. 1024 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 2 then ext = "".AXE"""
+$ WRITE CONFIG "$ if f$getsyi(""ARCH_TYPE"") .eq. 3 then ext = "".IXE"""
$ ENDIF
$ IF (perl_symbol)
$ THEN
+$ perl_setup_perl = "'" + "'perl'" ! triple quoted foreign command symbol
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgPerl'ext'"
-$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgPerl'ext'"
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ dbgperl :== $''vms_prefix':[000000]dbgperl'ext'"
+$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]ndbgperl'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
$ WRITE CONFIG "$ perl :== $''vms_prefix':[000000]Perl'ext'"
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ ELSE ! .NOT.perl_symbol
+$ perl_setup_perl = "perl" ! command verb
$ IF (use_vmsdebug_perl)
$ THEN
-$ WRITE CONFIG "$ define dbgPerlShr ''vms_prefix':[000000]dbgPerlShr'ext'"
+$ WRITE CONFIG "$ define dbgperlshr ''vms_prefix':[000000]dbgperlshr'ext'"
$ ELSE
-$ WRITE CONFIG "$ define PerlShr ''vms_prefix':[000000]PerlShr'ext'"
+$ WRITE CONFIG "$ define perlshr ''vms_prefix':[000000]perlshr'ext'"
$ ENDIF
$ IF perl_verb .EQS. "PROCESS"
$ THEN
$ WRITE CONFIG "$ set command ''vms_prefix':[000000]''packageup'.CLD"
$ ENDIF
$ ENDIF ! perl_symbol
-$ WRITE CONFIG "$ define/nolog pod2text ''vms_prefix':[lib.pod]pod2text.com"
-$ WRITE CONFIG "$ define/nolog pod2html ''vms_prefix':[lib.pod]pod2html.com"
-$ WRITE CONFIG "$ define/nolog pod2man ''vms_prefix':[lib.pod]pod2man.com"
$!
$ IF (tzneedset)
$ THEN
$ WRITE CONFIG "$! define SYS$TIMEZONE_DIFFERENTIAL ''tzd'"
$ ENDIF
$ WRITE CONFIG "$!"
-$ WRITE CONFIG "$! Symbols for commonly used programs:"
+$ WRITE CONFIG "$! Symbols for Perl-based utility programs:"
$ WRITE CONFIG "$!"
-$ IF (perl_symbol)
-$ THEN
-$ WRITE CONFIG "$ Perldoc == ""'"+"'Perl' ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""'"+"'Perl' pod2text"""
-$ WRITE CONFIG "$ pod2html == ""'"+"'Perl' pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""'"+"'Perl' ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""'"+"'Perl' pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""'"+"'Perl' ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""'"+"'Perl' ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""'"+"'Perl' ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""'"+"'Perl' ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""'"+"'Perl' ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$ libnetcfg == ""'"+"'Perl' ''vms_prefix':[utils]libnetcfg.com"""
-$ WRITE CONFIG "$!perlcc == ""'"+"'Perl' ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ perlivp == ""'"+"'Perl' ''vms_prefix':[utils]perlivp.com"""
-$ WRITE CONFIG "$ splain == ""'"+"'Perl' ''vms_prefix':[utils]splain.com"""
-$ WRITE CONFIG "$ xsubpp == ""'"+"'Perl' ''vms_prefix':[utils]xsubpp.com"""
-$ ELSE
-$ WRITE CONFIG "$ Perldoc == ""Perl ''vms_prefix':[lib.pod]Perldoc.com -t"""
-$ WRITE CONFIG "$ pod2text == ""Perl pod2text"""
-$ WRITE CONFIG "$ pod2html == ""Perl pod2html"""
-$ WRITE CONFIG "$ pod2latex == ""Perl ''vms_prefix':[lib.pod]pod2latex.com"""
-$ WRITE CONFIG "$!pod2man == ""Perl pod2man"""
-$ WRITE CONFIG "$!Perlbug == ""Perl ''vms_prefix':[lib]Perlbug.com"""
-$ WRITE CONFIG "$ c2ph == ""Perl ''vms_prefix':[utils]c2ph.com"""
-$ IF F$LOCATE("Devel::DProf",extensions) .LT. F$LENGTH(extensions)
-$ THEN
-$ WRITE CONFIG "$ dprofpp == ""Perl ''vms_prefix':[utils]dprofpp.com"""
-$ ENDIF
-$ WRITE CONFIG "$ h2ph == ""Perl ''vms_prefix':[utils]h2ph.com"""
-$ WRITE CONFIG "$ h2xs == ""Perl ''vms_prefix':[utils]h2xs.com"""
-$ WRITE CONFIG "$ libnetcfg == ""Perl ''vms_prefix':[utils]libnetcfg.com"""
-$ WRITE CONFIG "$!perlcc == ""Perl ''vms_prefix':[utils]perlcc.com"""
-$ WRITE CONFIG "$ perlivp == ""Perl ''vms_prefix':[utils]perlivp.com"""
-$ WRITE CONFIG "$ splain == ""Perl ''vms_prefix':[utils]splain.com"""
-$ WRITE CONFIG "$ xsubpp == ""Perl ''vms_prefix':[utils]xsubpp.com"""
-$ ENDIF
+$ WRITE CONFIG "$ c2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]c2ph.com"""
+$ WRITE CONFIG "$ config_data== """ + perl_setup_perl + " ''vms_prefix':[utils]config_data.com"""
+$ WRITE CONFIG "$ corelist == """ + perl_setup_perl + " ''vms_prefix':[utils]corelist.com"""
+$ WRITE CONFIG "$ cpan == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan.com"""
+$ WRITE CONFIG "$ cpan2dist == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan2dist.com"""
+$! FIXME: "-" is an operator and illegal in a symbol name -- cpanp-run-perl can't work
+$!$ WRITE CONFIG "$ cpanp-run-perl == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp-run-perl.com"""
+$ WRITE CONFIG "$ cpanp == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp.com"""
+$ WRITE CONFIG "$ enc2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]enc2xs.com"""
+$ WRITE CONFIG "$ find2perl == """ + perl_setup_perl + " ''vms_prefix':[utils]find2perl.com"""
+$ WRITE CONFIG "$ h2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]h2ph.com"""
+$ WRITE CONFIG "$ h2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]h2xs.com"""
+$ WRITE CONFIG "$ instmodsh == """ + perl_setup_perl + " ''vms_prefix':[utils]instmodsh.com"""
+$ WRITE CONFIG "$ libnetcfg == """ + perl_setup_perl + " ''vms_prefix':[utils]libnetcfg.com"""
+$ WRITE CONFIG "$ perlbug == """ + perl_setup_perl + " ''vms_prefix':[utils]perlbug.com"""
+$ WRITE CONFIG "$ perldoc == """ + perl_setup_perl + " ''vms_prefix':[utils]perldoc.com """"-t"""""""
+$ WRITE CONFIG "$ perlivp == """ + perl_setup_perl + " ''vms_prefix':[utils]perlivp.com"""
+$ WRITE CONFIG "$ piconv == """ + perl_setup_perl + " ''vms_prefix':[utils]piconv.com"""
+$ WRITE CONFIG "$ pl2pm == """ + perl_setup_perl + " ''vms_prefix':[utils]pl2pm.com"""
+$ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html.com"""
+$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2latex.com"""
+$ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text.com"""
+$ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man.com"""
+$ WRITE CONFIG "$ pod2usage == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2usage.com"""
+$ WRITE CONFIG "$ podchecker == """ + perl_setup_perl + " ''vms_prefix':[utils]podchecker.com"""
+$ WRITE CONFIG "$ podselect == """ + perl_setup_perl + " ''vms_prefix':[utils]podselect.com"""
+$ WRITE CONFIG "$ prove == """ + perl_setup_perl + " ''vms_prefix':[utils]prove.com"""
+$ WRITE CONFIG "$ psed == """ + perl_setup_perl + " ''vms_prefix':[utils]psed.com"""
+$ WRITE CONFIG "$ pstruct == """ + perl_setup_perl + " ''vms_prefix':[utils]pstruct.com"""
+$ WRITE CONFIG "$ s2p == """ + perl_setup_perl + " ''vms_prefix':[utils]s2p.com"""
+$ WRITE CONFIG "$ ptar == """ + perl_setup_perl + " ''vms_prefix':[utils]ptar.com"""
+$ WRITE CONFIG "$ ptardiff == """ + perl_setup_perl + " ''vms_prefix':[utils]ptardiff.com"""
+$ WRITE CONFIG "$ ptargrep == """ + perl_setup_perl + " ''vms_prefix':[utils]ptargrep.com"""
+$ WRITE CONFIG "$ shasum == """ + perl_setup_perl + " ''vms_prefix':[utils]shasum.com"""
+$ WRITE CONFIG "$ splain == """ + perl_setup_perl + " ''vms_prefix':[utils]splain.com"""
+$ WRITE CONFIG "$ xsubpp == """ + perl_setup_perl + " ''vms_prefix':[utils]xsubpp.com"""
$ CLOSE CONFIG
$!
$ echo ""
$!
$ IF ( F$SEARCH("config.msg").NES."" )
$ THEN
-$ echo "Hmm. I also noted the following information while running:"
-$ echo ""
-$ type config.msg
+$ echo4 "Hmm. I also noted the following information while running:"
+$ echo4 ""
+$ TYPE/OUTPUT=SYS$ERROR: config.msg
$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) config.msg
$ DELETE/NOLOG/NOCONFIRM config.msg;
$ ENDIF
$ dflt = F$ENVIRONMENT("DEFAULT")
$ IF F$LOCATE("UU]",dflt).EQS.(F$LENGTH(dflt)-3)
$ THEN
+$ IF ( F$SEARCH("[.CXX_REPOSITORY]*.*").NES."" )
+$ THEN
+$ DELETE/NOLOG/NOCONFIRM [.CXX_REPOSITORY]*.*;*
+$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) CXX_REPOSITORY.DIR
+$ ENDIF
$ IF ( F$SEARCH("[]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM []*.*;*
$ SET DEFAULT [-]
$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) UU.DIR
https://perl5.git.perl.org / perl5.git / blobdiff