}
#ifdef DEBUGGING
- /* Allow dumping */
+ /* Allow dumping but overwriting the collection of skipped
+ * ops and/or strings with fake optimized ops */
n = scan + NODE_SZ_STR(scan);
while (n <= stop) {
- if (PL_regkind[OP(n)] != NOTHING || OP(n) == NOTHING) {
- OP(n) = OPTIMIZED;
- NEXT_OFF(n) = 0;
- }
+ OP(n) = OPTIMIZED;
+ FLAGS(n) = 0;
+ NEXT_OFF(n) = 0;
n++;
}
#endif
/* This section of code defines the inversion list object and its methods. The
* interfaces are highly subject to change, so as much as possible is static to
- * this file. An inversion list is here implemented as a malloc'd C array with
- * some added info. More will be coming when functionality is added later.
+ * this file. An inversion list is here implemented as a malloc'd C UV array
+ * with some added info that is placed as UVs at the beginning in a header
+ * portion. An inversion list for Unicode is an array of code points, sorted
+ * by ordinal number. The zeroth element is the first code point in the list.
+ * The 1th element is the first element beyond that not in the list. In other
+ * words, the first range is
+ * invlist[0]..(invlist[1]-1)
+ * The other ranges follow. Thus every element that is divisible by two marks
+ * the beginning of a range that is in the list, and every element not
+ * divisible by two marks the beginning of a range not in the list. A single
+ * element inversion list that contains the single code point N generally
+ * consists of two elements
+ * invlist[0] == N
+ * invlist[1] == N+1
+ * (The exception is when N is the highest representable value on the
+ * machine, in which case the list containing just it would be a single
+ * element, itself. By extension, if the last range in the list extends to
+ * infinity, then the first element of that range will be in the inversion list
+ * at a position that is divisible by two, and is the final element in the
+ * list.)
+ * Taking the complement (inverting) an inversion list is quite simple, if the
+ * first element is 0, remove it; otherwise add a 0 element at the beginning.
+ * This implementation reserves an element at the beginning of each inversion list
+ * to contain 0 when the list contains 0, and contains 1 otherwise. The actual
+ * beginning of the list is either that element if 0, or the next one if 1.
+ *
+ * More about inversion lists can be found in "Unicode Demystified"
+ * Chapter 13 by Richard Gillam, published by Addison-Wesley.
+ * More will be coming when functionality is added later.
*
- * It is currently implemented as an SV pointing to an array of UVs that the SV
- * thinks are bytes. This allows us to have an array of UV whose memory
- * management is automatically handled by the existing facilities for SV's.
+ * The inversion list data structure is currently implemented as an SV pointing
+ * to an array of UVs that the SV thinks are bytes. This allows us to have an
+ * array of UV whose memory management is automatically handled by the existing
+ * facilities for SV's.
*
* Some of the methods should always be private to the implementation, and some
* should eventually be made public */
-#define TO_INTERNAL_SIZE(x) (x * sizeof(UV)) /* Internally things are UVs */
-#define FROM_INTERNAL_SIZE(x) (x / sizeof(UV))
+#define INVLIST_LEN_OFFSET 0 /* Number of elements in the inversion list */
+#define INVLIST_ITER_OFFSET 1 /* Current iteration position */
+
+#define INVLIST_ZERO_OFFSET 2 /* 0 or 1; must be last element in header */
+/* The UV at position ZERO contains either 0 or 1. If 0, the inversion list
+ * contains the code point U+00000, and begins here. If 1, the inversion list
+ * doesn't contain U+0000, and it begins at the next UV in the array.
+ * Inverting an inversion list consists of adding or removing the 0 at the
+ * beginning of it. By reserving a space for that 0, inversion can be made
+ * very fast */
+
+#define HEADER_LENGTH (INVLIST_ZERO_OFFSET + 1)
+
+/* Internally things are UVs */
+#define TO_INTERNAL_SIZE(x) ((x + HEADER_LENGTH) * sizeof(UV))
+#define FROM_INTERNAL_SIZE(x) ((x / sizeof(UV)) - HEADER_LENGTH)
+
#define INVLIST_INITIAL_LEN 10
PERL_STATIC_INLINE UV*
+S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0)
+{
+ /* Returns a pointer to the first element in the inversion list's array.
+ * This is called upon initialization of an inversion list. Where the
+ * array begins depends on whether the list has the code point U+0000
+ * in it or not. The other parameter tells it whether the code that
+ * follows this call is about to put a 0 in the inversion list or not.
+ * The first element is either the element with 0, if 0, or the next one,
+ * if 1 */
+
+ UV* zero = get_invlist_zero_addr(invlist);
+
+ PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT;
+
+ /* Must be empty */
+ assert(! *get_invlist_len_addr(invlist));
+
+ /* 1^1 = 0; 1^0 = 1 */
+ *zero = 1 ^ will_have_0;
+ return zero + *zero;
+}
+
+PERL_STATIC_INLINE UV*
S_invlist_array(pTHX_ SV* const invlist)
{
/* Returns the pointer to the inversion list's array. Every time the
PERL_ARGS_ASSERT_INVLIST_ARRAY;
- return (UV *) SvPVX(invlist);
+ /* Must not be empty */
+ assert(*get_invlist_len_addr(invlist));
+ assert(*get_invlist_zero_addr(invlist) == 0
+ || *get_invlist_zero_addr(invlist) == 1);
+
+ /* The array begins either at the element reserved for zero if the
+ * list contains 0 (that element will be set to 0), or otherwise the next
+ * element (in which case the reserved element will be set to 1). */
+ return (UV *) (get_invlist_zero_addr(invlist)
+ + *get_invlist_zero_addr(invlist));
+}
+
+PERL_STATIC_INLINE UV*
+S_get_invlist_len_addr(pTHX_ SV* invlist)
+{
+ /* Return the address of the UV that contains the current number
+ * of used elements in the inversion list */
+
+ PERL_ARGS_ASSERT_GET_INVLIST_LEN_ADDR;
+
+ return (UV *) (SvPVX(invlist) + (INVLIST_LEN_OFFSET * sizeof (UV)));
}
PERL_STATIC_INLINE UV
PERL_ARGS_ASSERT_INVLIST_LEN;
- return FROM_INTERNAL_SIZE(SvCUR(invlist));
+ return *get_invlist_len_addr(invlist);
+}
+
+PERL_STATIC_INLINE void
+S_invlist_set_len(pTHX_ SV* const invlist, const UV len)
+{
+ /* Sets the current number of elements stored in the inversion list */
+
+ PERL_ARGS_ASSERT_INVLIST_SET_LEN;
+
+ *get_invlist_len_addr(invlist) = len;
+
+ SvCUR_set(invlist, TO_INTERNAL_SIZE(len));
+ /* If the list contains U+0000, that element is part of the header,
+ * and should not be counted as part of the array. It will contain
+ * 0 in that case, and 1 otherwise. So we could flop 0=>1, 1=>0 and
+ * subtract:
+ * SvCUR_set(invlist,
+ * TO_INTERNAL_SIZE(len
+ * - (*get_invlist_zero_addr(inv_list) ^ 1)));
+ * But, this is only valid if len is not 0. The consequences of not doing
+ * this is that the memory allocation code may think that the 1 more UV
+ * is being used than actually is, and so might do an unnecessary grow.
+ * That seems worth not bothering to make this the precise amount.
+ *
+ * Note that when inverting, SvCUR shouldn't change */
}
PERL_STATIC_INLINE UV
return FROM_INTERNAL_SIZE(SvLEN(invlist));
}
-PERL_STATIC_INLINE void
-S_invlist_set_len(pTHX_ SV* const invlist, const UV len)
+PERL_STATIC_INLINE UV*
+S_get_invlist_zero_addr(pTHX_ SV* invlist)
{
- /* Sets the current number of elements stored in the inversion list */
+ /* Return the address of the UV that is reserved to hold 0 if the inversion
+ * list contains 0. This has to be the last element of the heading, as the
+ * list proper starts with either it if 0, or the next element if not.
+ * (But we force it to contain either 0 or 1) */
- PERL_ARGS_ASSERT_INVLIST_SET_LEN;
+ PERL_ARGS_ASSERT_GET_INVLIST_ZERO_ADDR;
- SvCUR_set(invlist, TO_INTERNAL_SIZE(len));
+ return (UV *) (SvPVX(invlist) + (INVLIST_ZERO_OFFSET * sizeof (UV)));
}
#ifndef PERL_IN_XSUB_RE
* space to store 'initial_size' elements. If that number is negative, a
* system default is used instead */
+ SV* new_list;
+
if (initial_size < 0) {
initial_size = INVLIST_INITIAL_LEN;
}
/* Allocate the initial space */
- return newSV(TO_INTERNAL_SIZE(initial_size));
+ new_list = newSV(TO_INTERNAL_SIZE(initial_size));
+ invlist_set_len(new_list, 0);
+
+ /* Force iterinit() to be used to get iteration to work */
+ *get_invlist_iter_addr(new_list) = UV_MAX;
+
+ /* This should force a segfault if a method doesn't initialize this
+ * properly */
+ *get_invlist_zero_addr(new_list) = UV_MAX;
+
+ return new_list;
}
#endif
* etc */
#define ELEMENT_IN_INVLIST_SET(i) (! ((i) & 1))
-#define PREV_ELEMENT_IN_INVLIST_SET(i) ! ELEMENT_IN_INVLIST_SET(i)
+#define PREV_ELEMENT_IN_INVLIST_SET(i) (! ELEMENT_IN_INVLIST_SET(i))
#ifndef PERL_IN_XSUB_RE
void
* the end of the inversion list. The range must be above any existing
* ones. */
- UV* array = invlist_array(invlist);
+ UV* array;
UV max = invlist_max(invlist);
UV len = invlist_len(invlist);
PERL_ARGS_ASSERT__APPEND_RANGE_TO_INVLIST;
- if (len > 0) {
-
+ if (len == 0) { /* Empty lists must be initialized */
+ array = _invlist_array_init(invlist, start == 0);
+ }
+ else {
/* Here, the existing list is non-empty. The current max entry in the
* list is generally the first value not in the set, except when the
* set extends to the end of permissible values, in which case it is
* append out-of-order */
UV final_element = len - 1;
+ array = invlist_array(invlist);
if (array[final_element] > start
|| ELEMENT_IN_INVLIST_SET(final_element))
{
* moved */
if (max < len) {
invlist_extend(invlist, len);
+ invlist_set_len(invlist, len); /* Have to set len here to avoid assert
+ failure in invlist_array() */
array = invlist_array(invlist);
}
-
- invlist_set_len(invlist, len);
+ else {
+ invlist_set_len(invlist, len);
+ }
/* The next item on the list starts the range, the one after that is
* one past the new range. */
invlist_set_len(invlist, len - 1);
}
}
-#endif
-STATIC void
-S_invlist_union(pTHX_ SV* const a, SV* const b, SV** output)
+void
+Perl__invlist_union(pTHX_ SV* const a, SV* const b, SV** output)
{
/* Take the union of two inversion lists and point 'result' to it. If
* 'result' on input points to one of the two lists, the reference count to
* return the larger of the input lists, but then outside code might need
* to keep track of whether to free the input list or not */
- UV* array_a = invlist_array(a); /* a's array */
- UV* array_b = invlist_array(b);
- UV len_a = invlist_len(a); /* length of a's array */
- UV len_b = invlist_len(b);
+ UV* array_a; /* a's array */
+ UV* array_b;
+ UV len_a; /* length of a's array */
+ UV len_b;
SV* u; /* the resulting union */
UV* array_u;
*/
UV count = 0;
- PERL_ARGS_ASSERT_INVLIST_UNION;
+ PERL_ARGS_ASSERT__INVLIST_UNION;
+
+ /* If either one is empty, the union is the other one */
+ len_a = invlist_len(a);
+ if (len_a == 0) {
+ if (output == &a) {
+ SvREFCNT_dec(a);
+ }
+ else if (output != &b) {
+ *output = invlist_clone(b);
+ }
+ /* else *output already = b; */
+ return;
+ }
+ else if ((len_b = invlist_len(b)) == 0) {
+ if (output == &b) {
+ SvREFCNT_dec(b);
+ }
+ else if (output != &a) {
+ *output = invlist_clone(a);
+ }
+ /* else *output already = a; */
+ return;
+ }
+
+ /* Here both lists exist and are non-empty */
+ array_a = invlist_array(a);
+ array_b = invlist_array(b);
/* Size the union for the worst case: that the sets are completely
* disjoint */
u = _new_invlist(len_a + len_b);
- array_u = invlist_array(u);
+
+ /* Will contain U+0000 if either component does */
+ array_u = _invlist_array_init(u, (len_a > 0 && array_a[0] == 0)
+ || (len_b > 0 && array_b[0] == 0));
/* Go through each list item by item, stopping when exhausted one of
* them */
return;
}
-STATIC void
-S_invlist_intersection(pTHX_ SV* const a, SV* const b, SV** i)
+void
+Perl__invlist_intersection(pTHX_ SV* const a, SV* const b, SV** i)
{
/* Take the intersection of two inversion lists and point 'i' to it. If
* 'i' on input points to one of the two lists, the reference count to that
* union above
*/
- UV* array_a = invlist_array(a); /* a's array */
- UV* array_b = invlist_array(b);
- UV len_a = invlist_len(a); /* length of a's array */
- UV len_b = invlist_len(b);
+ UV* array_a; /* a's array */
+ UV* array_b;
+ UV len_a; /* length of a's array */
+ UV len_b;
SV* r; /* the resulting intersection */
UV* array_r;
*/
UV count = 0;
- PERL_ARGS_ASSERT_INVLIST_INTERSECTION;
+ PERL_ARGS_ASSERT__INVLIST_INTERSECTION;
+
+ /* If either one is empty, the intersection is null */
+ len_a = invlist_len(a);
+ if ((len_a == 0) || ((len_b = invlist_len(b)) == 0)) {
+ *i = _new_invlist(0);
+
+ /* If the result is the same as one of the inputs, the input is being
+ * overwritten */
+ if (i == &a) {
+ SvREFCNT_dec(a);
+ }
+ else if (i == &b) {
+ SvREFCNT_dec(b);
+ }
+ return;
+ }
+
+ /* Here both lists exist and are non-empty */
+ array_a = invlist_array(a);
+ array_b = invlist_array(b);
/* Size the intersection for the worst case: that the intersection ends up
* fragmenting everything to be completely disjoint */
r= _new_invlist(len_a + len_b);
- array_r = invlist_array(r);
+
+ /* Will contain U+0000 iff both components do */
+ array_r = _invlist_array_init(r, len_a > 0 && array_a[0] == 0
+ && len_b > 0 && array_b[0] == 0);
/* Go through each list item by item, stopping when exhausted one of
* them */
return;
}
+#endif
+
STATIC SV*
S_add_range_to_invlist(pTHX_ SV* invlist, const UV start, const UV end)
{
range_invlist = _new_invlist(2);
_append_range_to_invlist(range_invlist, start, end);
- invlist_union(invlist, range_invlist, &invlist);
+ _invlist_union(invlist, range_invlist, &invlist);
/* The temporary can be freed */
SvREFCNT_dec(range_invlist);
return add_range_to_invlist(invlist, cp, cp);
}
+#ifndef PERL_IN_XSUB_RE
+void
+Perl__invlist_invert(pTHX_ SV* const invlist)
+{
+ /* Complement the input inversion list. This adds a 0 if the list didn't
+ * have a zero; removes it otherwise. As described above, the data
+ * structure is set up so that this is very efficient */
+
+ UV* len_pos = get_invlist_len_addr(invlist);
+
+ PERL_ARGS_ASSERT__INVLIST_INVERT;
+
+ /* The inverse of matching nothing is matching everything */
+ if (*len_pos == 0) {
+ _append_range_to_invlist(invlist, 0, UV_MAX);
+ return;
+ }
+
+ /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the
+ * zero element was a 0, so it is being removed, so the length decrements
+ * by 1; and vice-versa. SvCUR is unaffected */
+ if (*get_invlist_zero_addr(invlist) ^= 1) {
+ (*len_pos)--;
+ }
+ else {
+ (*len_pos)++;
+ }
+}
+#endif
+
+PERL_STATIC_INLINE SV*
+S_invlist_clone(pTHX_ SV* const invlist)
+{
+
+ /* Return a new inversion list that is a copy of the input one, which is
+ * unchanged */
+
+ SV* new_invlist = _new_invlist(SvCUR(invlist));
+
+ PERL_ARGS_ASSERT_INVLIST_CLONE;
+
+ Copy(SvPVX(invlist), SvPVX(new_invlist), SvCUR(invlist), char);
+ return new_invlist;
+}
+
+#ifndef PERL_IN_XSUB_RE
+void
+Perl__invlist_subtract(pTHX_ SV* const a, SV* const b, SV** result)
+{
+ /* Point result to an inversion list which consists of all elements in 'a'
+ * that aren't also in 'b' */
+
+ PERL_ARGS_ASSERT__INVLIST_SUBTRACT;
+
+ /* Subtracting nothing retains the original */
+ if (invlist_len(b) == 0) {
+
+ /* If the result is not to be the same variable as the original, create
+ * a copy */
+ if (result != &a) {
+ *result = invlist_clone(a);
+ }
+ } else {
+ SV *b_copy = invlist_clone(b);
+ _invlist_invert(b_copy); /* Everything not in 'b' */
+ _invlist_intersection(a, b_copy, result); /* Everything in 'a' not in
+ 'b' */
+ SvREFCNT_dec(b_copy);
+ }
+
+ if (result == &b) {
+ SvREFCNT_dec(b);
+ }
+
+ return;
+}
+#endif
+
+PERL_STATIC_INLINE UV*
+S_get_invlist_iter_addr(pTHX_ SV* invlist)
+{
+ /* Return the address of the UV that contains the current iteration
+ * position */
+
+ PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR;
+
+ return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV)));
+}
+
+PERL_STATIC_INLINE void
+S_invlist_iterinit(pTHX_ SV* invlist) /* Initialize iterator for invlist */
+{
+ PERL_ARGS_ASSERT_INVLIST_ITERINIT;
+
+ *get_invlist_iter_addr(invlist) = 0;
+}
+
+STATIC bool
+S_invlist_iternext(pTHX_ SV* invlist, UV* start, UV* end)
+{
+ UV* pos = get_invlist_iter_addr(invlist);
+ UV len = invlist_len(invlist);
+ UV *array;
+
+ PERL_ARGS_ASSERT_INVLIST_ITERNEXT;
+
+ if (*pos >= len) {
+ *pos = UV_MAX; /* Force iternit() to be required next time */
+ return FALSE;
+ }
+
+ array = invlist_array(invlist);
+
+ *start = array[(*pos)++];
+
+ if (*pos >= len) {
+ *end = UV_MAX;
+ }
+ else {
+ *end = array[(*pos)++] - 1;
+ }
+
+ return TRUE;
+}
+
+#if 0
+void
+S_invlist_dump(pTHX_ SV* const invlist, const char * const header)
+{
+ /* Dumps out the ranges in an inversion list. The string 'header'
+ * if present is output on a line before the first range */
+
+ UV start, end;
+
+ if (header && strlen(header)) {
+ PerlIO_printf(Perl_debug_log, "%s\n", header);
+ }
+ invlist_iterinit(invlist);
+ while (invlist_iternext(invlist, &start, &end)) {
+ if (end == UV_MAX) {
+ PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. INFINITY\n", start);
+ }
+ else {
+ PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. 0x%04"UVXf"\n", start, end);
+ }
+ }
+}
+#endif
+
+#undef HEADER_LENGTH
#undef INVLIST_INITIAL_LENGTH
#undef TO_INTERNAL_SIZE
#undef FROM_INTERNAL_SIZE
+#undef INVLIST_LEN_OFFSET
+#undef INVLIST_ZERO_OFFSET
+#undef INVLIST_ITER_OFFSET
/* End of inversion list object */
/* If folding and there are code points above 255, we calculate all
* characters that could fold to or from the ones already on the list */
if (FOLD && nonbitmap) {
- UV i;
+ UV start, end; /* End points of code point ranges */
SV* fold_intersection;
- UV* fold_list;
/* This is a list of all the characters that participate in folds
* (except marks, etc in multi-char folds */
* be checked. Get the intersection of this class and all the
* possible characters that are foldable. This can quickly narrow
* down a large class */
- invlist_intersection(PL_utf8_foldable, nonbitmap, &fold_intersection);
+ _invlist_intersection(PL_utf8_foldable, nonbitmap, &fold_intersection);
/* Now look at the foldable characters in this class individually */
- fold_list = invlist_array(fold_intersection);
- for (i = 0; i < invlist_len(fold_intersection); i++) {
+ invlist_iterinit(fold_intersection);
+ while (invlist_iternext(fold_intersection, &start, &end)) {
UV j;
- /* The next entry is the beginning of the range that is in the
- * class */
- UV start = fold_list[i++];
-
-
- /* The next entry is the beginning of the next range, which
- * isn't in the class, so the end of the current range is one
- * less than that */
- UV end = fold_list[i] - 1;
-
/* Look at every character in the range */
for (j = start; j <= end; j++) {
/* Combine the two lists into one. */
if (l1_fold_invlist) {
if (nonbitmap) {
- invlist_union(nonbitmap, l1_fold_invlist, &nonbitmap);
+ _invlist_union(nonbitmap, l1_fold_invlist, &nonbitmap);
SvREFCNT_dec(l1_fold_invlist);
}
else {
* nothing like \w in it; some thought also would have to be given to the
* interaction with above 0x100 chars */
if (! LOC
- && (ANYOF_FLAGS(ret) & ANYOF_FLAGS_ALL) == ANYOF_INVERT
+ && (ANYOF_FLAGS(ret) & ANYOF_INVERT)
&& ! unicode_alternate
- && ! nonbitmap
+ /* In case of /d, there are some things that should match only when in
+ * not in the bitmap, i.e., they require UTF8 to match. These are
+ * listed in nonbitmap. */
+ && (! nonbitmap
+ || ! DEPENDS_SEMANTICS
+ || (ANYOF_FLAGS(ret) & ANYOF_NONBITMAP_NON_UTF8))
&& SvCUR(listsv) == initial_listsv_len)
{
- for (value = 0; value < ANYOF_BITMAP_SIZE; ++value)
- ANYOF_BITMAP(ret)[value] ^= 0xFF;
+ if (! nonbitmap) {
+ for (value = 0; value < ANYOF_BITMAP_SIZE; ++value)
+ ANYOF_BITMAP(ret)[value] ^= 0xFF;
+ /* The inversion means that everything above 255 is matched */
+ ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL;
+ }
+ else {
+ /* Here, also has things outside the bitmap. Go through each bit
+ * individually and add it to the list to get rid of from those
+ * things not in the bitmap */
+ SV *remove_list = _new_invlist(2);
+ _invlist_invert(nonbitmap);
+ for (value = 0; value < 256; ++value) {
+ if (ANYOF_BITMAP_TEST(ret, value)) {
+ ANYOF_BITMAP_CLEAR(ret, value);
+ remove_list = add_cp_to_invlist(remove_list, value);
+ }
+ else {
+ ANYOF_BITMAP_SET(ret, value);
+ }
+ }
+ _invlist_subtract(nonbitmap, remove_list, &nonbitmap);
+ SvREFCNT_dec(remove_list);
+ }
+
stored = 256 - stored;
- /* The inversion means that everything above 255 is matched; and at the
- * same time we clear the invert flag */
- ANYOF_FLAGS(ret) = ANYOF_UNICODE_ALL;
+ /* Clear the invert flag since have just done it here */
+ ANYOF_FLAGS(ret) &= ~ANYOF_INVERT;
}
/* Folding in the bitmap is taken care of above, but not for locale (for
}
if (nonbitmap) {
- UV* nonbitmap_array = invlist_array(nonbitmap);
- UV nonbitmap_len = invlist_len(nonbitmap);
- UV i;
-
- /* Here have the full list of items to match that aren't in the
- * bitmap. Convert to the structure that the rest of the code is
- * expecting. XXX That rest of the code should convert to this
- * structure */
- for (i = 0; i < nonbitmap_len; i++) {
-
- /* The next entry is the beginning of the range that is in the
- * class */
- UV start = nonbitmap_array[i++];
- UV end;
-
- /* The next entry is the beginning of the next range, which isn't
- * in the class, so the end of the current range is one less than
- * that. But if there is no next range, it means that the range
- * begun by 'start' extends to infinity, which for this platform
- * ends at UV_MAX */
- if (i == nonbitmap_len) {
- end = UV_MAX;
- }
- else {
- end = nonbitmap_array[i] - 1;
- }
-
+ UV start, end;
+ invlist_iterinit(nonbitmap);
+ while (invlist_iternext(nonbitmap, &start, &end)) {
if (start == end) {
Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n", start);
}
https://perl5.git.perl.org / perl5.git / blobdiff