+#!/bin/sh
+#
# THIS IS A GENERATED FILE
# DO NOT HAND-EDIT
#
/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
- * available to covert a multibyte string into a wide character string.
+ * available to convert a multibyte string into a wide character string.
*/
#$d_mbstowcs HAS_MBSTOWCS /**/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
- * to covert a multibyte to a wide character.
+ * to convert a multibyte to a wide character.
*/
#$d_mbtowc HAS_MBTOWC /**/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
- * to covert a wide character to a multibyte.
+ * to convert a wide character to a multibyte.
*/
#$d_wctomb HAS_WCTOMB /**/
*/
#$i_niin I_NETINET_IN /**/
-/* I_SFIO:
- * This symbol, if defined, indicates to the C program that it should
- * include <sfio.h>.
- */
-#$i_sfio I_SFIO /**/
-
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
* be included.
*/
#$i_syswait I_SYS_WAIT /**/
-/* I_TERMIO:
- * This symbol, if defined, indicates that the program should include
- * <termio.h> rather than <sgtty.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- * This symbol, if defined, indicates that the program should include
- * the POSIX termios.h rather than sgtty.h or termio.h.
- * There are also differences in the ioctl() calls that depend on the
- * value of this symbol.
- */
-/* I_SGTTY:
- * This symbol, if defined, indicates that the program should include
- * <sgtty.h> rather than <termio.h>. There are also differences in
- * the ioctl() calls that depend on the value of this symbol.
- */
-#$i_termio I_TERMIO /**/
-#$i_termios I_TERMIOS /**/
-#$i_sgtty I_SGTTY /**/
-
/* I_UNISTD:
* This symbol, if defined, indicates to the C program that it should
* include <unistd.h>.
#define OSNAME "$osname" /**/
#define OSVERS "$osvers" /**/
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-#$usecrosscompile USE_CROSS_COMPILE /**/
-#define PERL_TARGETARCH "$targetarch" /**/
-#endif
-
/* MULTIARCH:
* This symbol, if defined, signifies that the build
* process will produce some binary files that are going to be
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety.
+ * 4 and 8. The default is eight, for safety. For cross-compiling
+ * or multiarch support, Configure will set a minimum of 8.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
-# define MEM_ALIGNBYTES 8
-#else
#define MEM_ALIGNBYTES $alignbytes
-#endif
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* This symbol holds the hexadecimal constant defined in byteorder,
* in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
* If the compiler supports cross-compiling or multiple-architecture
- * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * binaries (e.g. on NeXT systems), use compiler-defined macros to
* determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#if defined(MULTIARCH)
# ifdef __LITTLE_ENDIAN__
# if LONGSIZE == 4
# define BYTEORDER 0x1234
* structure has a member called sa_len, indicating the length of
* the structure.
*/
+/* HAS_SOCKADDR_IN6:
+ * This symbol, if defined, indicates the availability of
+ * struct sockaddr_in6;
+ */
/* HAS_SIN6_SCOPE_ID:
* This symbol, if defined, indicates that the struct sockaddr_in6
* structure has a member called sin6_scope_id.
*/
+/* HAS_IP_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq;
+ */
+/* HAS_IP_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ip_mreq_source;
+ */
+/* HAS_IPV6_MREQ:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq;
+ */
+/* HAS_IPV6_MREQ_SOURCE:
+ * This symbol, if defined, indicates the availability of
+ * struct ipv6_mreq_source;
+ */
#$d_socket HAS_SOCKET /**/
#$d_sockpair HAS_SOCKETPAIR /**/
#$d_sockaddr_sa_len HAS_SOCKADDR_SA_LEN /**/
#$d_msg_peek HAS_MSG_PEEK /**/
#$d_msg_proxy HAS_MSG_PROXY /**/
#$d_scm_rights HAS_SCM_RIGHTS /**/
+#$d_sockaddr_in6 HAS_SOCKADDR_IN6 /**/
#$d_sin6_scope_id HAS_SIN6_SCOPE_ID /**/
+#$d_ip_mreq HAS_IP_MREQ /**/
+#$d_ip_mreq_source HAS_IP_MREQ_SOURCE /**/
+#$d_ipv6_mreq HAS_IPV6_MREQ /**/
+#$d_ipv6_mreq_source HAS_IPV6_MREQ_SOURCE /**/
/* HAS_SRAND48_R:
* This symbol, if defined, indicates that the srand48_r routine
#define DOUBLESIZE $doublesize /**/
/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
+ * This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
#$ebcdic EBCDIC /**/
#define Gid_t_f $gidformat /**/
/* Gid_t_sign:
- * This symbol holds the signedess of a Gid_t.
+ * This symbol holds the signedness of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
#define Gid_t_sign $gidsign /* GID sign */
* /bin/pdksh, /bin/ash, /bin/bash, or even something such as
* D:/bin/sh.exe.
*/
-#define SH_PATH "$sh" /**/
+#define SH_PATH "$targetsh" /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
#define Uid_t_f $uidformat /**/
/* Uid_t_sign:
- * This symbol holds the signedess of a Uid_t.
+ * This symbol holds the signedness of a Uid_t.
* 1 for unsigned, -1 for signed.
*/
#define Uid_t_sign $uidsign /* UID sign */
#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = supports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
-#endif
-#define VOIDFLAGS $voidflags
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */
-#define M_VOID /* Xenix strikes again */
+/* I_TERMIO:
+ * This symbol, if defined, indicates that the program should include
+ * <termio.h> rather than <sgtty.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+/* I_TERMIOS:
+ * This symbol, if defined, indicates that the program should include
+ * the POSIX termios.h rather than sgtty.h or termio.h.
+ * There are also differences in the ioctl() calls that depend on the
+ * value of this symbol.
+ */
+/* I_SGTTY:
+ * This symbol, if defined, indicates that the program should include
+ * <sgtty.h> rather than <termio.h>. There are also differences in
+ * the ioctl() calls that depend on the value of this symbol.
+ */
+#$i_termio I_TERMIO /**/
+#$i_termios I_TERMIOS /**/
+#$i_sgtty I_SGTTY /**/
+
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+#$usecrosscompile USE_CROSS_COMPILE /**/
+#define PERL_TARGETARCH "$targetarch" /**/
#endif
/* PERL_USE_DEVEL:
*/
#$d_int64_t HAS_INT64_T /**/
+/* HAS_ISBLANK:
+ * This manifest constant lets the C program know that isblank
+ * is available.
+ */
+#$d_isblank HAS_ISBLANK /**/
+
/* HAS_ISFINITE:
* This symbol, if defined, indicates that the isfinite routine is
* available to check whether a double is finite (non-infinity non-NaN).
*/
#$d_setproctitle HAS_SETPROCTITLE /**/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
- */
-#$d_sfio USE_SFIO /**/
-
/* HAS_SIGNBIT:
* This symbol, if defined, indicates that the signbit routine is
* available to check if the given number has the sign bit set.
*/
#$d_ustat HAS_USTAT /**/
+/* HAS_WCSCMP:
+ * This symbol, if defined, indicates that the wcscmp routine is
+ * available to compare two wide character strings.
+ */
+#$d_wcscmp HAS_WCSCMP /**/
+
+/* HAS_WCSXFRM:
+ * This symbol, if defined, indicates that the wcsxfrm routine is
+ * available to tranform a wide character string for wcscmp().
+ */
+#$d_wcsxfrm HAS_WCSXFRM /**/
+
/* HAS_WRITEV:
* This symbol, if defined, indicates that the writev routine is
* available to do scatter writes.
#$usedl USE_DYNAMIC_LOADING /**/
/* FFLUSH_NULL:
- * This symbol, if defined, tells that fflush(NULL) does flush
- * all pending stdio output.
+ * This symbol, if defined, tells that fflush(NULL) correctly
+ * flushes all pending stdio output without side effects. In
+ * particular, on some platforms calling fflush(NULL) *still*
+ * corrupts STDIN if it is a pipe.
*/
/* FFLUSH_ALL:
* This symbol, if defined, tells that to flush
* This variable contains the size of struct stat's st_ino in bytes.
*/
/* ST_INO_SIGN:
- * This symbol holds the signedess of struct stat's st_ino.
+ * This symbol holds the signedness of struct stat's st_ino.
* 1 for unsigned, -1 for signed.
*/
#define ST_INO_SIGN $st_ino_sign /* st_ino sign */
#$usefaststdio USE_FAST_STDIO /**/
#endif
+/* USE_KERN_PROC_PATHNAME:
+ * This symbol, if defined, indicates that we can use sysctl with
+ * KERN_PROC_PATHNAME to get a full path for the executable, and hence
+ * convert $^X to an absolute path.
+ */
+#$usekernprocpathname USE_KERN_PROC_PATHNAME /**/
+
/* USE_LARGE_FILES:
* This symbol, if defined, indicates that large file support
* should be used when available.
#$usemultiplicity MULTIPLICITY /**/
#endif
+/* USE_NSGETEXECUTABLEPATH:
+ * This symbol, if defined, indicates that we can use _NSGetExecutablePath
+ * and realpath to get a full path for the executable, and hence convert
+ * $^X to an absolute path.
+ */
+#$usensgetexecutablepath USE_NSGETEXECUTABLEPATH /**/
+
/* USE_PERLIO:
* This symbol, if defined, indicates that the PerlIO abstraction should
* be used throughout. If not defined, stdio should be
https://perl5.git.perl.org / perl5.git / blobdiff