#----------------------------------------------------------------
# QNX hints
#
-# As of perl5.004_04, all tests pass under:
-# QNX 4.23A
+# Most of the hints in this file are for QNX4, which needed
+# more help. The QNX6 hints are located toward the bottom.
+#
+# perl-5.7.2 passes all tests under QNX4.24G
# Watcom 10.6 with Beta/970211.wcc.update.tar.F
# socket3r.lib Nov21 1996.
+# perl-5.7.2 fails 4 known tests under QNX6.1.0
#
# As with many unix ports, this one depends on a few "standard"
-# unix utilities which are not necessarily standard for QNX.
+# unix utilities which are not necessarily standard for QNX4.
#
# /bin/sh This is used heavily by Configure and then by
-# perl itself. QNX's version is fine, but Configure
+# perl itself. QNX4's version is fine, but Configure
# will choke on the 16-bit version, so if you are
# running QNX 4.22, link /bin/sh to /bin32/ksh
# ar This is the standard unix library builder.
# cpp Configure and perl need a way to invoke a C
# preprocessor. I have created a simple cover
# for cc which does the right thing. Without this,
-# Configure will create it's own wrapper which works,
+# Configure will create its own wrapper which works,
# but it doesn't handle some of the command line arguments
# that perl will throw at it.
# make You really need GNU make to compile this. GNU make
# ships by default with QNX 4.23, but you can get it
# from quics for earlier versions.
#----------------------------------------------------------------
-# Outstanding Issues:
-# lib/posix.t test fails on test 17 because acos(1) != 0.
+# Outstanding Issues for QNX4:
+# There is no support for dynamically linked libraries in
+# QNX4.
+#
+# ext/Cwd/Cwd.t will complain if `pwd` and cwd don't give
+# the same results. cwd calls `fullpath -t`, so if you
+# cd `fullpath -t` before running the test, it will
+# pass.
+#
+# lib/File/Find/taint.t will complain if '.' is in your
+# PATH. The PATH test is triggered because cwd calls
+# `fullpath -t`.
+#
+# ext/IO/lib/IO/t/io_sock.t: Subtest 14 is skipped due to
+# the fact that the functionality to read back the non-blocking
+# status of a socket is not implemented in QNX's TCP/IP. This
+# has been reported to QNX and it may work with later versions
+# of TCP/IP.
+#
+# Older issues:
+# lib/posix.t test failed on test 17 because acos(1) != 0.
# Resolved in 970211 Beta
# lib/io_udp.t test hangs because of a bug in getsockname().
# Fixed in latest BETA socket3r.lib
-# If there is a softlink in your path, Findbin will fail.
-# This is a documented feature of perl's getpwd().
-# There is currently no support for dynamically linked
-# libraries.
#----------------------------------------------------------------
-# At present, all QNX systems are equivalent architectures,
-# so it might be reasonable to call archname=qnx rather than
-# making an unnecessary distinction between AT-qnx and PCI-qnx,
-# for example.
+# Outstanding Issues for QNX6:
+# The following tests are still failing as of 5.7.1:
+#
+# op/sprintf.........................FAILED at test 91
+# lib/1_compile......................FAILED at test 33
+# ext/IO/lib/IO/t/io_sock............FAILED at test 12
+# ext/IO/lib/IO/t/io_udp.............FAILED at test 4
+#
#----------------------------------------------------------------
# These hints were submitted by:
# Norton T. Allen
# If you have suggestions or changes, please let me know.
#----------------------------------------------------------------
-#----------------------------------------------------------------
-# QNX doesn't come with a csh and the ports of tcsh I've used
-# don't work reliably:
-#----------------------------------------------------------------
-csh=''
-d_csh='undef'
-full_csh=''
+echo ""
+echo "Some tests may fail. Please read the hints/qnx.sh file."
+echo ""
#----------------------------------------------------------------
-# setuid scripts are secure under QNX.
-# (Basically, the same race conditions apply, but assuming
-# the scripts are located in a secure directory, the methods
-# for exploiting the race condition are defeated because
-# the loader expands the script name fully before executing
-# the interpreter.)
-#----------------------------------------------------------------
-d_suidsafe='define'
+# At present, all QNX4 systems are equivalent architectures,
+# so it is reasonable to call archname=x86-qnx rather than
+# making an unnecessary distinction between AT-qnx and PCI-qnx,
+# for example. I will use uname's architecture for Neutrino.
+#----------------------------------------------------------------
+set X `uname -a`
+shift
+[ "$1" != "QNX" ] && echo "uname doesn't look like QNX!"
+case $4 in
+ 42[2-9]) archname='x86-qnx';;
+ *) osname='nto'
+ osvers=$3
+ archname="$5-nto";;
+esac
-#----------------------------------------------------------------
-# difftime is implemented as a preprocessor macro, so it doesn't show
-# up in the libraries:
-#----------------------------------------------------------------
-d_difftime='define'
+if [ "$osname" = "qnx" ]; then
+ #----------------------------------------------------------------
+ # QNX doesn't come with a csh and the ports of tcsh I've used
+ # don't work reliably:
+ #----------------------------------------------------------------
+ csh=''
+ d_csh='undef'
+ full_csh=''
-#----------------------------------------------------------------
-# strtod is in the math library, but we can't tell Configure
-# about the math library or it will confuse the linker
-#----------------------------------------------------------------
-d_strtod='define'
+ #----------------------------------------------------------------
+ # setuid scripts are secure under QNX.
+ # (Basically, the same race conditions apply, but assuming
+ # the scripts are located in a secure directory, the methods
+ # for exploiting the race condition are defeated because
+ # the loader expands the script name fully before executing
+ # the interpreter.)
+ #----------------------------------------------------------------
+ d_suidsafe='define'
-lib_ext='3r.lib'
-libc='/usr/lib/clib3r.lib'
+ #----------------------------------------------------------------
+ # difftime is implemented as a preprocessor macro, so it doesn't show
+ # up in the libraries:
+ #----------------------------------------------------------------
+ d_difftime='define'
-#----------------------------------------------------------------
-# ccflags:
-# I like to turn the warnings up high, but a few common
-# constructs make a lot of noise, so I turn those warnings off.
-# A few still remain...
-#
-# HIDEMYMALLOC is necessary if using mymalloc since it is very
-# tricky (though not impossible) to totally replace the watcom
-# malloc/free set.
-#
-# unix.h is required as a general rule for unixy applications.
-#----------------------------------------------------------------
-ccflags='-DHIDEMYMALLOC -mf -w4 -Wc,-wcd=202 -Wc,-wcd=203 -Wc,-wcd=302 -Wc,-fi=unix.h'
+ #----------------------------------------------------------------
+ # strtod is in the math library, but we can't tell Configure
+ # about the math library or it will confuse the linker
+ #----------------------------------------------------------------
+ d_strtod='define'
-#----------------------------------------------------------------
-# ldflags:
-# If you want debugging information, you must specify -g on the
-# link as well as the compile. If optimize != -g, you should
-# remove this.
-#----------------------------------------------------------------
-ldflags="-g -N1M"
+ lib_ext='3r.lib'
+ libc='/usr/lib/clib3r.lib'
-so='none'
-selecttype='fd_set *'
+ #----------------------------------------------------------------
+ # ccflags:
+ # I like to turn the warnings up high, but a few common
+ # constructs make a lot of noise, so I turn those warnings off.
+ # A few still remain...
+ #
+ # unix.h is required as a general rule for unixy applications.
+ #----------------------------------------------------------------
+ ccflags='-mf -w4 -Wc,-wcd=202 -Wc,-wcd=203 -Wc,-wcd=302 -Wc,-fi=unix.h'
-#----------------------------------------------------------------
-# Add -lunix to list of libs. This is needed mainly so the nm
-# search will find funcs in the unix lib. Including unix.h should
-# automatically include the library without -l.
-#----------------------------------------------------------------
-libswanted="$libswanted unix"
+ #----------------------------------------------------------------
+ # ldflags:
+ # If you want debugging information, you must specify -g on the
+ # link as well as the compile. If optimize != -g, you should
+ # remove this.
+ #----------------------------------------------------------------
+ ldflags="-g -N1M"
-if [ -z "`which ar 2>/dev/null`" ]; then
- cat <<-'EOF' >&4
- I don't see an 'ar', so I'm guessing you are running
- Watcom 9.5 or earlier. You may want to install the ar
- cover found in the qnx subdirectory of this distribution.
- It might reasonably be placed in /usr/local/bin.
+ so='none'
+ selecttype='fd_set *'
+
+ #----------------------------------------------------------------
+ # Add -lunix to list of libs. This is needed mainly so the nm
+ # search will find funcs in the unix lib. Including unix.h should
+ # automatically include the library without -l.
+ #----------------------------------------------------------------
+ libswanted="$libswanted unix"
+
+ if [ -z "`which ar 2>/dev/null`" ]; then
+ cat <<-'EOF' >&4
+ I don't see an 'ar', so I'm guessing you are running
+ Watcom 9.5 or earlier. You may want to install the ar
+ cover found in the qnx subdirectory of this distribution.
+ It might reasonably be placed in /usr/local/bin.
EOF
-fi
-#----------------------------------------------------------------
-# Here is a nm script which fixes up wlib's output to look
-# something like nm's, at least enough so that Configure can
-# use it.
-#----------------------------------------------------------------
-if [ -z "`which nm 2>/dev/null`" ]; then
- cat <<-EOF
- Creating a quick-and-dirty nm cover for Configure to use:
+ fi
+ #----------------------------------------------------------------
+ # Here is a nm script which fixes up wlib's output to look
+ # something like nm's, at least enough so that Configure can
+ # use it.
+ #----------------------------------------------------------------
+ if [ -z "`which nm 2>/dev/null`" ]; then
+ cat <<-EOF
+ Creating a quick-and-dirty nm cover for Configure to use:
EOF
- cat >../UU/nm <<-'EOF'
- #! /bin/sh
- #__USAGE
- #%C <lib> [<lib> ...]
- # Designed to mimic Unix's nm utility to list
- # defined symbols in a library
- unset WLIB
- for i in $*; do wlib $i; done |
- awk '
- /^ / {
- for (i = 1; i <= NF; i++) {
- sub("_$", "", $i)
- print "000000 T " $i
- }
- }'
+ cat >./UU/nm <<-'EOF'
+ #! /bin/sh
+ #__USAGE
+ #%C <lib> [<lib> ...]
+ # Designed to mimic Unix's nm utility to list
+ # defined symbols in a library
+ unset WLIB
+ for i in $*; do wlib $i; done |
+ awk '
+ /^ / {
+ for (i = 1; i <= NF; i++) {
+ sub("_$", "", $i)
+ print "000000 T " $i
+ }
+ }'
EOF
- chmod +x ../UU/nm
-fi
+ chmod +x ./UU/nm
+ fi
-cppstdin=`which cpp 2>/dev/null`
-if [ -n "$cppstdin" ]; then
- cat <<-EOF >&4
- I found a cpp at $cppstdin and will assume it is a good
- thing to use. If this proves to be false, there is a
- thin cover for cpp in the qnx subdirectory of this
- distribution which you could move into your path.
+ cppstdin=`which cpp 2>/dev/null`
+ if [ -n "$cppstdin" ]; then
+ cat <<-EOF >&4
+ I found a cpp at $cppstdin and will assume it is a good
+ thing to use. If this proves to be false, there is a
+ thin cover for cpp in the qnx subdirectory of this
+ distribution which you could move into your path.
EOF
- cpprun="$cppstdin"
-else
- cat <<-EOF >&4
+ cpprun="$cppstdin"
+ else
+ cat <<-EOF >&4
- There is a cpp cover in the qnx subdirectory of this
- distribution which works a little better than the
- Configure default. You may wish to copy it to
- /usr/local/bin or some other suitable location.
+ There is a cpp cover in the qnx subdirectory of this
+ distribution which works a little better than the
+ Configure default. You may wish to copy it to
+ /usr/local/bin or some other suitable location.
EOF
-fi
+ fi
+else
+ # $^O eq nto
+
+ ccflags='-DDLOPEN_WONT_DO_RELATIVE_PATHS'
+
+ # Options required to get dynamic linking to work
+ lddlflags='-shared'
+ ccdlflags='-Wl,-E'
+
+ # Somewhere in the build, something tries to throw a gcc
+ # option to $cc if it knows it invokes gcc. Our cc doesn't
+ # recognize that option, so we're better off setting cc=gcc.
+ cc='gcc'
+
+ # If we use perl's malloc, it dies with an invalid sbrk.
+ # This is probably worth tracking down someday.
+ usemymalloc='false'
+fi
https://perl5.git.perl.org / perl5.git / blobdiff