struct cop {
BASEOP
+ /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
+ an exact multiple of 8 bytes to save structure padding. */
+ line_t cop_line; /* line # of this command */
char * cop_label; /* label for this construct */
#ifdef USE_ITHREADS
char * cop_stashpv; /* package line was compiled in */
#endif
U32 cop_hints; /* hints bits from pragmata */
U32 cop_seq; /* parse sequence number */
- line_t cop_line; /* line # of this command */
/* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
STRLEN * cop_warnings; /* lexical warnings bitmask */
/* compile time state of %^H. See the comment in op.c for how this is
# ifdef NETWARE
# define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
+# define CopFILE_setn(c,pv,l) ((c)->cop_file = savepv((pv),(l)))
# else
# define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
+# define CopFILE_setn(c,pv,l) ((c)->cop_file = savesharedpvn((pv),(l)))
# endif
# define CopFILESV(c) (CopFILE(c) \
? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
# define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
+# define CopLABEL(c) ((c)->cop_label)
+# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
# ifdef NETWARE
# define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
# define CopFILE_free(c) SAVECOPFILE_FREE(c)
+# define CopLABEL_free(c) SAVECOPLABEL_FREE(c)
+# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
# else
# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
+# define CopLABEL_free(c) (PerlMemShared_free(CopLABEL(c)),(CopLABEL(c) = NULL))
+# define CopLABEL_alloc(pv) ((pv)?savesharedpv(pv):NULL)
# endif
#else
# define CopFILEGV(c) ((c)->cop_filegv)
# define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
# define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
+# define CopFILE_setn(c,pv,l) CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0))
# define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
# define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
# ifdef DEBUGGING
# else
# define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
# endif
-# define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : NULL)
+# define CopFILE(c) (CopFILEGV(c) && GvSV(CopFILEGV(c)) \
+ ? SvPVX(GvSV(CopFILEGV(c))) : NULL)
# define CopSTASH(c) ((c)->cop_stash)
+# define CopLABEL(c) ((c)->cop_label)
# define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
/* cop_stash is not refcounted */
# define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
# define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
+# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
+# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
# define CopSTASH_free(c)
# define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
+# define CopLABEL_free(c) (Safefree(CopLABEL(c)),(CopLABEL(c) = NULL))
#endif /* USE_ITHREADS */
#define CLEAR_ARGARRAY(ary) \
STMT_START { \
AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
- SvPV_set(ary, (char*)AvALLOC(ary)); \
+ AvARRAY(ary) = AvALLOC(ary); \
AvFILLp(ary) = -1; \
} STMT_END
cx->blk_eval.old_op_type = PL_op->op_type; \
cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
cx->blk_eval.old_eval_root = PL_eval_root; \
- cx->blk_eval.cur_text = PL_linestr; \
+ cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \
cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
cx->blk_eval.retop = NULL; \
cx->blk_eval.cur_top_env = PL_top_env; \
SV ** itervar;
#endif
SV * itersave;
+ /* (from inspection of source code) for a .. range of strings this is the
+ current string. */
SV * iterlval;
+ /* (from inspection of source code) for a foreach loop this is the array
+ being iterated over. For a .. range of numbers it's the current value.
+ A check is often made on the SvTYPE of iterary to determine whether
+ we are iterating over an array or a range. (numbers or strings) */
AV * iterary;
IV iterix;
+ /* (from inspection of source code) for a .. range of numbers this is the
+ maximum value. */
IV itermax;
};
+/* It might be possible to squeeze this structure further. As best I can tell
+ itermax and iterlval are never used at the same time, so it might be possible
+ to make them into a union. However, I'm not confident that there are enough
+ flag bits/NULLable pointers in this structure alone to encode which is
+ active. There is, however, U8 of space free in struct block, which could be
+ used. Right now it may not be worth squeezing this structure further, as it's
+ the largest part of struct block, and currently struct block is 64 bytes on
+ an ILP32 system, which will give good cache alignment.
+*/
#ifdef USE_ITHREADS
# define CxITERVAR(c) \
struct block {
U16 blku_type; /* what kind of context this is */
U8 blku_gimme; /* is this block running in list context? */
+ U8 blku_spare; /* Padding to match with struct subst */
I32 blku_oldsp; /* stack pointer to copy stuff down to */
COP * blku_oldcop; /* old curcop pointer */
I32 blku_oldmarksp; /* mark stack index */
/* substitution context */
struct subst {
U16 sbu_type; /* what kind of context this is */
- bool sbu_once;
- bool sbu_rxtainted;
+ U8 sbu_once; /* Actually both booleans, but U8 to matches */
+ U8 sbu_rxtainted; /* struct block */
I32 sbu_iters;
I32 sbu_maxiters;
I32 sbu_rflags;
#define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
#define G_NODEBUG 32 /* Disable debugging at toplevel. */
#define G_METHOD 64 /* Calling method. */
-#define G_FAKINGEVAL 256 /* Faking en eval context for call_sv or
+#define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or
fold_constants. */
/* flag bits for PL_in_eval */
struct stackinfo {
AV * si_stack; /* stack for current runlevel */
PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
+ struct stackinfo * si_prev;
+ struct stackinfo * si_next;
I32 si_cxix; /* current context index */
I32 si_cxmax; /* maximum allocated index */
I32 si_type; /* type of runlevel */
- struct stackinfo * si_prev;
- struct stackinfo * si_next;
I32 si_markoff; /* offset where markstack begins for us.
* currently used only with DEBUGGING,
* but not #ifdef-ed for bincompat */
https://perl5.git.perl.org / perl5.git / blobdiff