/*
- * perlio.c Copyright (c) 1996-2006, Nick Ing-Simmons You may distribute
- * under the terms of either the GNU General Public License or the
- * Artistic License, as specified in the README file.
+ * perlio.c
+ * Copyright (c) 1996-2006, Nick Ing-Simmons
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010, 2011 Larry Wall and others
+ *
+ * You may distribute under the terms of either the GNU General Public License
+ * or the Artistic License, as specified in the README file.
*/
/*
* Hour after hour for nearly three weary days he had jogged up and down,
* over passes, and through long dales, and across many streams.
+ *
+ * [pp.791-792 of _The Lord of the Rings_, V/iii: "The Muster of Rohan"]
*/
/* This file contains the functions needed to implement PerlIO, which
#define dSYS dNOOP
#endif
-#define VOIDUSED 1
-#ifdef PERL_MICRO
-# include "uconfig.h"
-#else
-# include "config.h"
-#endif
-
#define PERLIO_NOT_STDIO 0
-#if !defined(PERLIO_IS_STDIO) && !defined(USE_SFIO)
-/*
- * #define PerlIO FILE
- */
-#endif
/*
* This file provides those parts of PerlIO abstraction
* which are not #defined in perlio.h.
int mkstemp(char*);
#endif
+#ifdef VMS
+#include <rms.h>
+#endif
+
+#define PerlIO_lockcnt(f) (((PerlIOl*)(f))->head->flags)
+
/* Call the callback or PerlIOBase, and return failure. */
#define Perl_PerlIO_or_Base(f, callback, base, failure, args) \
if (PerlIOValid(f)) { \
else \
SETERRNO(EBADF, SS_IVCHAN)
-#ifndef USE_SFIO
+#if defined(__osf__) && _XOPEN_SOURCE < 500
+extern int fseeko(FILE *, off_t, int);
+extern off_t ftello(FILE *);
+#endif
+
+#define NATIVE_0xd CR_NATIVE
+#define NATIVE_0xa LF_NATIVE
+
+EXTERN_C int perlsio_binmode(FILE *fp, int iotype, int mode);
+
int
perlsio_binmode(FILE *fp, int iotype, int mode)
{
* This used to be contents of do_binmode in doio.c
*/
#ifdef DOSISH
-# if defined(atarist) || defined(__MINT__)
- if (!fflush(fp)) {
- if (mode & O_BINARY)
- ((FILE *) fp)->_flag |= _IOBIN;
- else
- ((FILE *) fp)->_flag &= ~_IOBIN;
- return 1;
- }
- return 0;
-# else
dTHX;
+ PERL_UNUSED_ARG(iotype);
#ifdef NETWARE
if (PerlLIO_setmode(fp, mode) != -1) {
#else
if (PerlLIO_setmode(fileno(fp), mode) != -1) {
#endif
-# if defined(WIN32) && defined(__BORLANDC__)
- /*
- * The translation mode of the stream is maintained independent
-of
- * the translation mode of the fd in the Borland RTL (heavy
- * digging through their runtime sources reveal). User has to
-set
- * the mode explicitly for the stream (though they don't
-document
- * this anywhere). GSAR 97-5-24
- */
- fseek(fp, 0L, 0);
- if (mode & O_BINARY)
- fp->flags |= _F_BIN;
- else
- fp->flags &= ~_F_BIN;
-# endif
return 1;
}
else
return 0;
-# endif
#else
# if defined(USEMYBINMODE)
dTHX;
+# if defined(__CYGWIN__)
+ PERL_UNUSED_ARG(iotype);
+# endif
if (my_binmode(fp, iotype, mode) != FALSE)
return 1;
else
# endif
#endif
}
-#endif /* sfio */
#ifndef O_ACCMODE
#define O_ACCMODE 3 /* Assume traditional implementation */
mode[ix++] = '+';
}
}
+#if O_BINARY != 0
+ /* Unless O_BINARY is different from zero, bit-and:ing
+ * with it won't do much good. */
if (rawmode & O_BINARY)
mode[ix++] = 'b';
+# endif
mode[ix] = '\0';
return ptype;
}
int
PerlIO_binmode(pTHX_ PerlIO *fp, int iotype, int mode, const char *names)
{
-#ifdef USE_SFIO
- PERL_UNUSED_ARG(iotype);
- PERL_UNUSED_ARG(mode);
- PERL_UNUSED_ARG(names);
- return 1;
-#else
return perlsio_binmode(fp, iotype, mode);
-#endif
}
PerlIO *
if (*args == &PL_sv_undef)
return PerlIO_tmpfile();
else {
- const char *name = SvPV_nolen_const(*args);
+ STRLEN len;
+ const char *name = SvPV_const(*args, len);
+ if (!IS_SAFE_PATHNAME(name, len, "open"))
+ return NULL;
+
if (*mode == IoTYPE_NUMERIC) {
fd = PerlLIO_open3(name, imode, perm);
if (fd >= 0)
return NULL;
}
+XS(XS_PerlIO__Layer__find); /* prototype to pass -Wmissing-prototypes */
XS(XS_PerlIO__Layer__find)
{
dXSARGS;
#endif
-#ifdef PERLIO_IS_STDIO
-
-void
-PerlIO_init(pTHX)
-{
- PERL_UNUSED_CONTEXT;
- /*
- * Does nothing (yet) except force this file to be included in perl
- * binary. That allows this file to force inclusion of other functions
- * that may be required by loadable extensions e.g. for
- * FileHandle::tmpfile
- */
-}
-
-#undef PerlIO_tmpfile
-PerlIO *
-PerlIO_tmpfile(void)
-{
- return tmpfile();
-}
-
-#else /* PERLIO_IS_STDIO */
-
-#ifdef USE_SFIO
-
-#undef HAS_FSETPOS
-#undef HAS_FGETPOS
-
-/*
- * This section is just to make sure these functions get pulled in from
- * libsfio.a
- */
-
-#undef PerlIO_tmpfile
-PerlIO *
-PerlIO_tmpfile(void)
-{
- return sftmp(0);
-}
-
-void
-PerlIO_init(pTHX)
-{
- PERL_UNUSED_CONTEXT;
- /*
- * Force this file to be included in perl binary. Which allows this
- * file to force inclusion of other functions that may be required by
- * loadable extensions e.g. for FileHandle::tmpfile
- */
-
- /*
- * Hack sfio does its own 'autoflush' on stdout in common cases. Flush
- * results in a lot of lseek()s to regular files and lot of small
- * writes to pipes.
- */
- sfset(sfstdout, SF_SHARE, 0);
-}
-
-/* This is not the reverse of PerlIO_exportFILE(), PerlIO_releaseFILE() is. */
-PerlIO *
-PerlIO_importFILE(FILE *stdio, const char *mode)
-{
- const int fd = fileno(stdio);
- if (!mode || !*mode) {
- mode = "r+";
- }
- return PerlIO_fdopen(fd, mode);
-}
-
-FILE *
-PerlIO_findFILE(PerlIO *pio)
-{
- const int fd = PerlIO_fileno(pio);
- FILE * const f = fdopen(fd, "r+");
- PerlIO_flush(pio);
- if (!f && errno == EINVAL)
- f = fdopen(fd, "w");
- if (!f && errno == EINVAL)
- f = fdopen(fd, "r");
- return f;
-}
-
-
-#else /* USE_SFIO */
/*======================================================================================*/
/*
* Implement all the PerlIO interface ourselves.
#include "perliol.h"
-/*
- * We _MUST_ have <unistd.h> if we are using lseek() and may have large
- * files
- */
-#ifdef I_UNISTD
-#include <unistd.h>
-#endif
-#ifdef HAS_MMAP
-#include <sys/mman.h>
-#endif
-
void
PerlIO_debug(const char *fmt, ...)
{
va_list ap;
dSYS;
va_start(ap, fmt);
- if (!PL_perlio_debug_fd && !PL_tainting && PL_uid == PL_euid && PL_gid == PL_egid) {
- const char * const s = PerlEnv_getenv("PERLIO_DEBUG");
- if (s && *s)
- PL_perlio_debug_fd = PerlLIO_open3(s, O_WRONLY | O_CREAT | O_APPEND, 0666);
- else
+ if (!PL_perlio_debug_fd) {
+ if (!TAINTING_get &&
+ PerlProc_getuid() == PerlProc_geteuid() &&
+ PerlProc_getgid() == PerlProc_getegid()) {
+ const char * const s = PerlEnv_getenv("PERLIO_DEBUG");
+ if (s && *s)
+ PL_perlio_debug_fd
+ = PerlLIO_open3(s, O_WRONLY | O_CREAT | O_APPEND, 0666);
+ else
+ PL_perlio_debug_fd = -1;
+ } else {
+ /* tainting or set*id, so ignore the environment, and ensure we
+ skip these tests next time through. */
PL_perlio_debug_fd = -1;
+ }
}
if (PL_perlio_debug_fd > 0) {
- dTHX;
#ifdef USE_ITHREADS
const char * const s = CopFILE(PL_curcop);
/* Use fixed buffer as sv_catpvf etc. needs SVs */
char buffer[1024];
- const STRLEN len = my_sprintf(buffer, "%.40s:%" IVdf " ", s ? s : "(none)", (IV) CopLINE(PL_curcop));
- const STRLEN len2 = vsprintf(buffer+len, fmt, ap);
- PerlLIO_write(PL_perlio_debug_fd, buffer, len + len2);
+ const STRLEN len1 = my_snprintf(buffer, sizeof(buffer), "%.40s:%" IVdf " ", s ? s : "(none)", (IV) CopLINE(PL_curcop));
+ const STRLEN len2 = my_vsnprintf(buffer + len1, sizeof(buffer) - len1, fmt, ap);
+ PERL_UNUSED_RESULT(PerlLIO_write(PL_perlio_debug_fd, buffer, len1 + len2));
#else
const char *s = CopFILE(PL_curcop);
STRLEN len;
- SV * const sv = newSVpvs("");
- Perl_sv_catpvf(aTHX_ sv, "%s:%" IVdf " ", s ? s : "(none)",
- (IV) CopLINE(PL_curcop));
+ SV * const sv = Perl_newSVpvf(aTHX_ "%s:%" IVdf " ", s ? s : "(none)",
+ (IV) CopLINE(PL_curcop));
Perl_sv_vcatpvf(aTHX_ sv, fmt, &ap);
s = SvPV_const(sv, len);
- PerlLIO_write(PL_perlio_debug_fd, s, len);
+ PERL_UNUSED_RESULT(PerlLIO_write(PL_perlio_debug_fd, s, len));
SvREFCNT_dec(sv);
#endif
}
* Inner level routines
*/
+/* check that the head field of each layer points back to the head */
+
+#ifdef DEBUGGING
+# define VERIFY_HEAD(f) PerlIO_verify_head(aTHX_ f)
+static void
+PerlIO_verify_head(pTHX_ PerlIO *f)
+{
+ PerlIOl *head, *p;
+ int seen = 0;
+#ifndef PERL_IMPLICIT_SYS
+ PERL_UNUSED_CONTEXT;
+#endif
+ if (!PerlIOValid(f))
+ return;
+ p = head = PerlIOBase(f)->head;
+ assert(p);
+ do {
+ assert(p->head == head);
+ if (p == (PerlIOl*)f)
+ seen = 1;
+ p = p->next;
+ } while (p);
+ assert(seen);
+}
+#else
+# define VERIFY_HEAD(f)
+#endif
+
+
/*
* Table of pointers to the PerlIO structs (malloc'ed)
*/
#define PERLIO_TABLE_SIZE 64
+static void
+PerlIO_init_table(pTHX)
+{
+ if (PL_perlio)
+ return;
+ Newxz(PL_perlio, PERLIO_TABLE_SIZE, PerlIOl);
+}
+
+
+
PerlIO *
PerlIO_allocate(pTHX)
{
- dVAR;
/*
* Find a free slot in the table, allocating new table as necessary
*/
- PerlIO **last;
- PerlIO *f;
+ PerlIOl **last;
+ PerlIOl *f;
last = &PL_perlio;
while ((f = *last)) {
int i;
- last = (PerlIO **) (f);
+ last = (PerlIOl **) (f);
for (i = 1; i < PERLIO_TABLE_SIZE; i++) {
- if (!*++f) {
- return f;
+ if (!((++f)->next)) {
+ goto good_exit;
}
}
}
- Newxz(f,PERLIO_TABLE_SIZE,PerlIO);
+ Newxz(f,PERLIO_TABLE_SIZE,PerlIOl);
if (!f) {
return NULL;
}
- *last = f;
- return f + 1;
+ *last = (PerlIOl*) f++;
+
+ good_exit:
+ f->flags = 0; /* lockcnt */
+ f->tab = NULL;
+ f->head = f;
+ return (PerlIO*) f;
}
#undef PerlIO_fdupopen
}
void
-PerlIO_cleantable(pTHX_ PerlIO **tablep)
+PerlIO_cleantable(pTHX_ PerlIOl **tablep)
{
- PerlIO * const table = *tablep;
+ PerlIOl * const table = *tablep;
if (table) {
int i;
- PerlIO_cleantable(aTHX_(PerlIO **) & (table[0]));
+ PerlIO_cleantable(aTHX_(PerlIOl **) & (table[0]));
for (i = PERLIO_TABLE_SIZE - 1; i > 0; i--) {
- PerlIO * const f = table + i;
- if (*f) {
- PerlIO_close(f);
+ PerlIOl * const f = table + i;
+ if (f->next) {
+ PerlIO_close(&(f->next));
}
}
Safefree(table);
if (--list->refcnt == 0) {
if (list->array) {
IV i;
- for (i = 0; i < list->cur; i++) {
- if (list->array[i].arg)
- SvREFCNT_dec(list->array[i].arg);
- }
+ for (i = 0; i < list->cur; i++)
+ SvREFCNT_dec(list->array[i].arg);
Safefree(list->array);
}
Safefree(list);
void
PerlIO_list_push(pTHX_ PerlIO_list_t *list, PerlIO_funcs *funcs, SV *arg)
{
- dVAR;
PerlIO_pair_t *p;
PERL_UNUSED_CONTEXT;
int i;
list = PerlIO_list_alloc(aTHX);
for (i=0; i < proto->cur; i++) {
- SV *arg = NULL;
- if (proto->array[i].arg)
- arg = PerlIO_sv_dup(aTHX_ proto->array[i].arg,param);
+ SV *arg = proto->array[i].arg;
+#ifdef USE_ITHREADS
+ if (arg && param)
+ arg = sv_dup(arg, param);
+#else
+ PERL_UNUSED_ARG(param);
+#endif
PerlIO_list_push(aTHX_ list, proto->array[i].funcs, arg);
}
}
PerlIO_clone(pTHX_ PerlInterpreter *proto, CLONE_PARAMS *param)
{
#ifdef USE_ITHREADS
- PerlIO **table = &proto->Iperlio;
- PerlIO *f;
+ PerlIOl **table = &proto->Iperlio;
+ PerlIOl *f;
PL_perlio = NULL;
PL_known_layers = PerlIO_clone_list(aTHX_ proto->Iknown_layers, param);
PL_def_layerlist = PerlIO_clone_list(aTHX_ proto->Idef_layerlist, param);
- PerlIO_allocate(aTHX); /* root slot is never used */
- PerlIO_debug("Clone %p from %p\n",aTHX,proto);
+ PerlIO_init_table(aTHX);
+ PerlIO_debug("Clone %p from %p\n",(void*)aTHX,(void*)proto);
while ((f = *table)) {
int i;
- table = (PerlIO **) (f++);
+ table = (PerlIOl **) (f++);
for (i = 1; i < PERLIO_TABLE_SIZE; i++) {
- if (*f) {
- (void) fp_dup(f, 0, param);
+ if (f->next) {
+ (void) fp_dup(&(f->next), 0, param);
}
f++;
}
}
#else
+ PERL_UNUSED_CONTEXT;
PERL_UNUSED_ARG(proto);
PERL_UNUSED_ARG(param);
#endif
void
PerlIO_destruct(pTHX)
{
- dVAR;
- PerlIO **table = &PL_perlio;
- PerlIO *f;
+ PerlIOl **table = &PL_perlio;
+ PerlIOl *f;
#ifdef USE_ITHREADS
- PerlIO_debug("Destruct %p\n",aTHX);
+ PerlIO_debug("Destruct %p\n",(void*)aTHX);
#endif
while ((f = *table)) {
int i;
- table = (PerlIO **) (f++);
+ table = (PerlIOl **) (f++);
for (i = 1; i < PERLIO_TABLE_SIZE; i++) {
- PerlIO *x = f;
+ PerlIO *x = &(f->next);
const PerlIOl *l;
while ((l = *x)) {
- if (l->tab->kind & PERLIO_K_DESTRUCT) {
+ if (l->tab && l->tab->kind & PERLIO_K_DESTRUCT) {
PerlIO_debug("Destruct popping %s\n", l->tab->name);
PerlIO_flush(x);
PerlIO_pop(aTHX_ x);
PerlIO_pop(pTHX_ PerlIO *f)
{
const PerlIOl *l = *f;
+ VERIFY_HEAD(f);
if (l) {
- PerlIO_debug("PerlIO_pop f=%p %s\n", (void*)f, l->tab->name);
- if (l->tab->Popped) {
+ PerlIO_debug("PerlIO_pop f=%p %s\n", (void*)f,
+ l->tab ? l->tab->name : "(Null)");
+ if (l->tab && l->tab->Popped) {
/*
* If popped returns non-zero do not free its layer structure
* it has either done so itself, or it is shared and still in
if ((*l->tab->Popped) (aTHX_ f) != 0)
return;
}
- *f = l->next;
- Safefree(l);
+ if (PerlIO_lockcnt(f)) {
+ /* we're in use; defer freeing the structure */
+ PerlIOBase(f)->flags = PERLIO_F_CLEARED;
+ PerlIOBase(f)->tab = NULL;
+ }
+ else {
+ *f = l->next;
+ Safefree(l);
+ }
+
}
}
AV *
PerlIO_get_layers(pTHX_ PerlIO *f)
{
- dVAR;
AV * const av = newAV();
if (PerlIOValid(f)) {
PerlIOl *l = PerlIOBase(f);
while (l) {
+ /* There is some collusion in the implementation of
+ XS_PerlIO_get_layers - it knows that name and flags are
+ generated as fresh SVs here, and takes advantage of that to
+ "copy" them by taking a reference. If it changes here, it needs
+ to change there too. */
SV * const name = l->tab && l->tab->name ?
newSVpv(l->tab->name, 0) : &PL_sv_undef;
SV * const arg = l->tab && l->tab->Getarg ?
PerlIO_funcs *
PerlIO_find_layer(pTHX_ const char *name, STRLEN len, int load)
{
- dVAR;
+
IV i;
if ((SSize_t) len <= 0)
len = strlen(name);
for (i = 0; i < PL_known_layers->cur; i++) {
PerlIO_funcs * const f = PL_known_layers->array[i].funcs;
- if (memEQ(f->name, name, len) && f->name[len] == 0) {
+ const STRLEN this_len = strlen(f->name);
+ if (this_len == len && memEQ(f->name, name, len)) {
PerlIO_debug("%.*s => %p\n", (int) len, name, (void*)f);
return f;
}
} else {
SV * const pkgsv = newSVpvs("PerlIO");
SV * const layer = newSVpvn(name, len);
- CV * const cv = get_cv("PerlIO::Layer::NoWarnings", FALSE);
+ CV * const cv = get_cvs("PerlIO::Layer::NoWarnings", 0);
ENTER;
- SAVEINT(PL_in_load_module);
+ SAVEBOOL(PL_in_load_module);
if (cv) {
SAVEGENERICSV(PL_warnhook);
- PL_warnhook = (SV *) (SvREFCNT_inc_simple_NN(cv));
+ PL_warnhook = MUTABLE_SV((SvREFCNT_inc_simple_NN(cv)));
}
- PL_in_load_module++;
+ PL_in_load_module = TRUE;
/*
* The two SVs are magically freed by load_module
*/
Perl_load_module(aTHX_ 0, pkgsv, NULL, layer, NULL);
- PL_in_load_module--;
LEAVE;
return PerlIO_find_layer(aTHX_ name, len, 0);
}
perlio_mg_set(pTHX_ SV *sv, MAGIC *mg)
{
if (SvROK(sv)) {
- IO * const io = GvIOn((GV *) SvRV(sv));
+ IO * const io = GvIOn(MUTABLE_GV(SvRV(sv)));
PerlIO * const ifp = IoIFP(io);
PerlIO * const ofp = IoOFP(io);
- Perl_warn(aTHX_ "set %" SVf " %p %p %p", sv, io, ifp, ofp);
+ Perl_warn(aTHX_ "set %" SVf " %p %p %p",
+ SVfARG(sv), (void*)io, (void*)ifp, (void*)ofp);
}
return 0;
}
perlio_mg_get(pTHX_ SV *sv, MAGIC *mg)
{
if (SvROK(sv)) {
- IO * const io = GvIOn((GV *) SvRV(sv));
+ IO * const io = GvIOn(MUTABLE_GV(SvRV(sv)));
PerlIO * const ifp = IoIFP(io);
PerlIO * const ofp = IoOFP(io);
- Perl_warn(aTHX_ "get %" SVf " %p %p %p", sv, io, ifp, ofp);
+ Perl_warn(aTHX_ "get %" SVf " %p %p %p",
+ SVfARG(sv), (void*)io, (void*)ifp, (void*)ofp);
}
return 0;
}
static int
perlio_mg_clear(pTHX_ SV *sv, MAGIC *mg)
{
- Perl_warn(aTHX_ "clear %" SVf, sv);
+ Perl_warn(aTHX_ "clear %" SVf, SVfARG(sv));
return 0;
}
static int
perlio_mg_free(pTHX_ SV *sv, MAGIC *mg)
{
- Perl_warn(aTHX_ "free %" SVf, sv);
+ Perl_warn(aTHX_ "free %" SVf, SVfARG(sv));
return 0;
}
perlio_mg_free
};
+XS(XS_io_MODIFY_SCALAR_ATTRIBUTES); /* prototype to pass -Wmissing-prototypes */
XS(XS_io_MODIFY_SCALAR_ATTRIBUTES)
{
dXSARGS;
MAGIC *mg;
int count = 0;
int i;
- sv_magic(sv, (SV *) av, PERL_MAGIC_ext, NULL, 0);
+ sv_magic(sv, MUTABLE_SV(av), PERL_MAGIC_ext, NULL, 0);
SvRMAGICAL_off(sv);
mg = mg_find(sv, PERL_MAGIC_ext);
mg->mg_virtual = &perlio_vtab;
mg_magical(sv);
- Perl_warn(aTHX_ "attrib %" SVf, sv);
+ Perl_warn(aTHX_ "attrib %" SVf, SVfARG(sv));
for (i = 2; i < items; i++) {
STRLEN len;
const char * const name = SvPV_const(ST(i), len);
XSRETURN(count);
}
-#endif /* USE_ATTIBUTES_FOR_PERLIO */
+#endif /* USE_ATTRIBUTES_FOR_PERLIO */
SV *
PerlIO_tab_sv(pTHX_ PerlIO_funcs *tab)
{
- HV * const stash = gv_stashpvs("PerlIO::Layer", TRUE);
+ HV * const stash = gv_stashpvs("PerlIO::Layer", GV_ADD);
SV * const sv = sv_bless(newRV_noinc(newSViv(PTR2IV(tab))), stash);
return sv;
}
+XS(XS_PerlIO__Layer__NoWarnings); /* prototype to pass -Wmissing-prototypes */
XS(XS_PerlIO__Layer__NoWarnings)
{
- /* This is used as a %SIG{__WARN__} handler to supress warnings
+ /* This is used as a %SIG{__WARN__} handler to suppress warnings
during loading of layers.
*/
- dVAR;
dXSARGS;
+ PERL_UNUSED_ARG(cv);
if (items)
PerlIO_debug("warning:%s\n",SvPV_nolen_const(ST(0)));
XSRETURN(0);
}
+XS(XS_PerlIO__Layer__find); /* prototype to pass -Wmissing-prototypes */
XS(XS_PerlIO__Layer__find)
{
- dVAR;
dXSARGS;
+ PERL_UNUSED_ARG(cv);
if (items < 2)
Perl_croak(aTHX_ "Usage class->find(name[,load])");
else {
STRLEN len;
const char * const name = SvPV_const(ST(1), len);
- const bool load = (items > 2) ? SvTRUE(ST(2)) : 0;
+ const bool load = (items > 2) ? SvTRUE_NN(ST(2)) : 0;
PerlIO_funcs * const layer = PerlIO_find_layer(aTHX_ name, len, load);
ST(0) =
(layer) ? sv_2mortal(PerlIO_tab_sv(aTHX_ layer)) :
void
PerlIO_define_layer(pTHX_ PerlIO_funcs *tab)
{
- dVAR;
if (!PL_known_layers)
PL_known_layers = PerlIO_list_alloc(aTHX);
PerlIO_list_push(aTHX_ PL_known_layers, tab, NULL);
int
PerlIO_parse_layers(pTHX_ PerlIO_list_t *av, const char *names)
{
- dVAR;
if (names) {
const char *s = names;
while (*s) {
* seen as an invalid separator character.
*/
const char q = ((*s == '\'') ? '"' : '\'');
- if (ckWARN(WARN_LAYER))
- Perl_warner(aTHX_ packWARN(WARN_LAYER),
- "Invalid separator character %c%c%c in PerlIO layer specification %s",
- q, *s, q, s);
+ Perl_ck_warner(aTHX_ packWARN(WARN_LAYER),
+ "Invalid separator character %c%c%c in PerlIO layer specification %s",
+ q, *s, q, s);
SETERRNO(EINVAL, LIB_INVARG);
return -1;
}
do {
e++;
- } while (isALNUM(*e));
+ } while (isWORDCHAR(*e));
llen = e - s;
if (*e == '(') {
int nesting = 1;
*/
case '\0':
e--;
- if (ckWARN(WARN_LAYER))
- Perl_warner(aTHX_ packWARN(WARN_LAYER),
- "Argument list not closed for PerlIO layer \"%.*s\"",
- (int) (e - s), s);
+ Perl_ck_warner(aTHX_ packWARN(WARN_LAYER),
+ "Argument list not closed for PerlIO layer \"%.*s\"",
+ (int) (e - s), s);
return -1;
default:
/*
PerlIO_funcs * const layer =
PerlIO_find_layer(aTHX_ s, llen, 1);
if (layer) {
+ SV *arg = NULL;
+ if (as)
+ arg = newSVpvn(as, alen);
PerlIO_list_push(aTHX_ av, layer,
- (as) ? newSVpvn(as,
- alen) :
- &PL_sv_undef);
+ (arg) ? arg : &PL_sv_undef);
+ SvREFCNT_dec(arg);
}
else {
- if (ckWARN(WARN_LAYER))
- Perl_warner(aTHX_ packWARN(WARN_LAYER), "Unknown PerlIO layer \"%.*s\"",
- (int) llen, s);
+ Perl_ck_warner(aTHX_ packWARN(WARN_LAYER), "Unknown PerlIO layer \"%.*s\"",
+ (int) llen, s);
return -1;
}
}
void
PerlIO_default_buffer(pTHX_ PerlIO_list_t *av)
{
- dVAR;
PERLIO_FUNCS_DECL(*tab) = &PerlIO_perlio;
#ifdef PERLIO_USING_CRLF
tab = &PerlIO_crlf;
tab = &PerlIO_stdio;
#endif
PerlIO_debug("Pushing %s\n", tab->name);
- PerlIO_list_push(aTHX_ av, PerlIO_find_layer(aTHX_ tab->name, 0, 0),
- &PL_sv_undef);
+ PerlIO_list_push(aTHX_ av, (PerlIO_funcs *)tab, &PL_sv_undef);
}
SV *
PERLIO_K_DUMMY | PERLIO_K_UTF8,
PerlIOPop_pushed,
NULL,
- NULL,
+ PerlIOBase_open,
NULL,
NULL,
NULL,
PerlIO_list_t *
PerlIO_default_layers(pTHX)
{
- dVAR;
if (!PL_def_layerlist) {
- const char * const s = (PL_tainting) ? NULL : PerlEnv_getenv("PERLIO");
+ const char * const s = TAINTING_get ? NULL : PerlEnv_getenv("PERLIO");
PERLIO_FUNCS_DECL(*osLayer) = &PerlIO_unix;
PL_def_layerlist = PerlIO_list_alloc(aTHX);
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_unix));
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_perlio));
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_stdio));
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_crlf));
-#ifdef HAS_MMAP
- PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_mmap));
-#endif
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_utf8));
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_remove));
PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_byte));
- PerlIO_list_push(aTHX_ PL_def_layerlist,
- PerlIO_find_layer(aTHX_ osLayer->name, 0, 0),
- &PL_sv_undef);
+ PerlIO_list_push(aTHX_ PL_def_layerlist, (PerlIO_funcs *)osLayer,
+ &PL_sv_undef);
if (s) {
PerlIO_parse_layers(aTHX_ PL_def_layerlist, s);
}
PerlIO_funcs *
PerlIO_default_layer(pTHX_ I32 n)
{
- dVAR;
PerlIO_list_t * const av = PerlIO_default_layers(aTHX);
if (n < 0)
n += av->cur;
void
PerlIO_stdstreams(pTHX)
{
- dVAR;
if (!PL_perlio) {
- PerlIO_allocate(aTHX);
+ PerlIO_init_table(aTHX);
PerlIO_fdopen(0, "Ir" PERLIO_STDTEXT);
PerlIO_fdopen(1, "Iw" PERLIO_STDTEXT);
PerlIO_fdopen(2, "Iw" PERLIO_STDTEXT);
PerlIO *
PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab), const char *mode, SV *arg)
{
+ VERIFY_HEAD(f);
if (tab->fsize != sizeof(PerlIO_funcs)) {
- mismatch:
- Perl_croak(aTHX_ "Layer does not match this perl");
+ Perl_croak( aTHX_
+ "%s (%"UVuf") does not match %s (%"UVuf")",
+ "PerlIO layer function table size", (UV)tab->fsize,
+ "size expected by this perl", (UV)sizeof(PerlIO_funcs) );
}
if (tab->size) {
PerlIOl *l;
if (tab->size < sizeof(PerlIOl)) {
- goto mismatch;
+ Perl_croak( aTHX_
+ "%s (%"UVuf") smaller than %s (%"UVuf")",
+ "PerlIO layer instance size", (UV)tab->size,
+ "size expected by this perl", (UV)sizeof(PerlIOl) );
}
/* Real layer with a data area */
if (f) {
if (l) {
l->next = *f;
l->tab = (PerlIO_funcs*) tab;
+ l->head = ((PerlIOl*)f)->head;
*f = l;
PerlIO_debug("PerlIO_push f=%p %s %s %p\n",
(void*)f, tab->name,
return f;
}
+PerlIO *
+PerlIOBase_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers,
+ IV n, const char *mode, int fd, int imode, int perm,
+ PerlIO *old, int narg, SV **args)
+{
+ PerlIO_funcs * const tab = PerlIO_layer_fetch(aTHX_ layers, n - 1, PerlIO_default_layer(aTHX_ 0));
+ if (tab && tab->Open) {
+ PerlIO* ret = (*tab->Open)(aTHX_ tab, layers, n - 1, mode, fd, imode, perm, old, narg, args);
+ if (ret && PerlIO_push(aTHX_ ret, self, mode, PerlIOArg) == NULL) {
+ PerlIO_close(ret);
+ return NULL;
+ }
+ return ret;
+ }
+ SETERRNO(EINVAL, LIB_INVARG);
+ return NULL;
+}
+
IV
PerlIOBase_binmode(pTHX_ PerlIO *f)
{
if (PerlIOValid(f)) {
/* Is layer suitable for raw stream ? */
- if (PerlIOBase(f)->tab->kind & PERLIO_K_RAW) {
+ if (PerlIOBase(f)->tab && PerlIOBase(f)->tab->kind & PERLIO_K_RAW) {
/* Yes - turn off UTF-8-ness, to undo UTF-8 locale effects */
PerlIOBase(f)->flags &= ~PERLIO_F_UTF8;
}
*/
t = f;
while (t && (l = *t)) {
- if (l->tab->Binmode) {
+ if (l->tab && l->tab->Binmode) {
/* Has a handler - normal case */
- if ((*l->tab->Binmode)(aTHX_ f) == 0) {
+ if ((*l->tab->Binmode)(aTHX_ t) == 0) {
if (*t == l) {
/* Layer still there - move down a layer */
t = PerlIONext(t);
}
}
if (PerlIOValid(f)) {
- PerlIO_debug(":raw f=%p :%s\n", (void*)f, PerlIOBase(f)->tab->name);
+ PerlIO_debug(":raw f=%p :%s\n", (void*)f,
+ PerlIOBase(f)->tab ? PerlIOBase(f)->tab->name : "(Null)");
return 0;
}
}
PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names)
{
int code = 0;
+ ENTER;
+ save_scalar(PL_errgv);
if (f && names) {
PerlIO_list_t * const layers = PerlIO_list_alloc(aTHX);
code = PerlIO_parse_layers(aTHX_ layers, names);
}
PerlIO_list_free(aTHX_ layers);
}
+ LEAVE;
return code;
}
PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int mode, const char *names)
{
PerlIO_debug("PerlIO_binmode f=%p %s %c %x %s\n", (void*)f,
- (PerlIOBase(f)) ? PerlIOBase(f)->tab->name : "(Null)",
+ (PerlIOBase(f) && PerlIOBase(f)->tab) ?
+ PerlIOBase(f)->tab->name : "(Null)",
iotype, mode, (names) ? names : "(Null)");
if (names) {
/* Perhaps we should turn on bottom-most aware layer
e.g. Ilya's idea that UNIX TTY could serve
*/
- if (PerlIOBase(f)->tab->kind & PERLIO_K_CANCRLF) {
+ if (PerlIOBase(f)->tab &&
+ PerlIOBase(f)->tab->kind & PERLIO_K_CANCRLF)
+ {
if (!(PerlIOBase(f)->flags & PERLIO_F_CRLF)) {
/* Not in text mode - flush any pending stuff and flip it */
PerlIO_flush(f);
const int code = PerlIO__close(aTHX_ f);
while (PerlIOValid(f)) {
PerlIO_pop(aTHX_ f);
+ if (PerlIO_lockcnt(f))
+ /* we're in use; the 'pop' deferred freeing the structure */
+ f = PerlIONext(f);
}
return code;
}
int
Perl_PerlIO_fileno(pTHX_ PerlIO *f)
{
- dVAR;
- Perl_PerlIO_or_Base(f, Fileno, fileno, -1, (aTHX_ f));
+ Perl_PerlIO_or_Base(f, Fileno, fileno, -1, (aTHX_ f));
}
-static const char *
-PerlIO_context_layers(pTHX_ const char *mode)
-{
- dVAR;
- const char *type = NULL;
- /*
- * Need to supply default layer info from open.pm
- */
- if (PL_curcop) {
- SV * const layers = PL_curcop->cop_io;
- if (layers) {
- STRLEN len;
- type = SvPV_const(layers, len);
- if (type && mode[0] != 'r') {
- /*
- * Skip to write part
- */
- const char * const s = strchr(type, 0);
- if (s && (STRLEN)(s - type) < len) {
- type = s + 1;
- }
- }
- }
- }
- return type;
-}
static PerlIO_funcs *
PerlIO_layer_from_ref(pTHX_ SV *sv)
{
- dVAR;
/*
* For any scalar type load the handler which is bundled with perl
*/
- if (SvTYPE(sv) < SVt_PVAV)
- return PerlIO_find_layer(aTHX_ STR_WITH_LEN("scalar"), 1);
+ if (SvTYPE(sv) < SVt_PVAV && (!isGV_with_GP(sv) || SvFAKE(sv))) {
+ PerlIO_funcs *f = PerlIO_find_layer(aTHX_ STR_WITH_LEN("scalar"), 1);
+ /* This isn't supposed to happen, since PerlIO::scalar is core,
+ * but could happen anyway in smaller installs or with PAR */
+ if (!f)
+ /* diag_listed_as: Unknown PerlIO layer "%s" */
+ Perl_ck_warner(aTHX_ packWARN(WARN_LAYER), "Unknown PerlIO layer \"scalar\"");
+ return f;
+ }
/*
* For other types allow if layer is known but don't try and load it
return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Code"), 0);
case SVt_PVGV:
return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Glob"), 0);
+ default:
+ return NULL;
}
- return NULL;
}
PerlIO_list_t *
PerlIO_resolve_layers(pTHX_ const char *layers,
const char *mode, int narg, SV **args)
{
- dVAR;
PerlIO_list_t *def = PerlIO_default_layers(aTHX);
int incdef = 1;
if (!PL_perlio)
* If it is a reference but not an object see if we have a handler
* for it
*/
- if (SvROK(arg) && !sv_isobject(arg)) {
+ if (SvROK(arg) && !SvOBJECT(SvRV(arg))) {
PerlIO_funcs * const handler = PerlIO_layer_from_ref(aTHX_ SvRV(arg));
if (handler) {
def = PerlIO_list_alloc(aTHX);
}
}
if (!layers || !*layers)
- layers = PerlIO_context_layers(aTHX_ mode);
+ layers = Perl_PerlIO_context_layers(aTHX_ mode);
if (layers && *layers) {
PerlIO_list_t *av;
if (incdef) {
- IV i;
- av = PerlIO_list_alloc(aTHX);
- for (i = 0; i < def->cur; i++) {
- PerlIO_list_push(aTHX_ av, def->array[i].funcs,
- def->array[i].arg);
- }
+ av = PerlIO_clone_list(aTHX_ def, NULL);
}
else {
av = def;
PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd,
int imode, int perm, PerlIO *f, int narg, SV **args)
{
- dVAR;
if (!f && narg == 1 && *args == &PL_sv_undef) {
if ((f = PerlIO_tmpfile())) {
if (!layers || !*layers)
- layers = PerlIO_context_layers(aTHX_ mode);
+ layers = Perl_PerlIO_context_layers(aTHX_ mode);
if (layers && *layers)
PerlIO_apply_layers(aTHX_ f, mode, layers);
}
PerlIOl *l = *f;
layera = PerlIO_list_alloc(aTHX);
while (l) {
- SV * const arg = (l->tab->Getarg)
- ? (*l->tab->Getarg) (aTHX_ &l, NULL, 0)
- : &PL_sv_undef;
- PerlIO_list_push(aTHX_ layera, l->tab, arg);
+ SV *arg = NULL;
+ if (l->tab && l->tab->Getarg)
+ arg = (*l->tab->Getarg) (aTHX_ &l, NULL, 0);
+ PerlIO_list_push(aTHX_ layera, l->tab,
+ (arg) ? arg : &PL_sv_undef);
+ SvREFCNT_dec(arg);
l = *PerlIONext(&l);
}
}
SSize_t
Perl_PerlIO_read(pTHX_ PerlIO *f, void *vbuf, Size_t count)
{
+ PERL_ARGS_ASSERT_PERLIO_READ;
+
Perl_PerlIO_or_Base(f, Read, read, -1, (aTHX_ f, vbuf, count));
}
SSize_t
Perl_PerlIO_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
{
+ PERL_ARGS_ASSERT_PERLIO_UNREAD;
+
Perl_PerlIO_or_Base(f, Unread, unread, -1, (aTHX_ f, vbuf, count));
}
SSize_t
Perl_PerlIO_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
{
+ PERL_ARGS_ASSERT_PERLIO_WRITE;
+
Perl_PerlIO_or_fail(f, Write, -1, (aTHX_ f, vbuf, count));
}
int
Perl_PerlIO_flush(pTHX_ PerlIO *f)
{
- dVAR;
if (f) {
if (*f) {
const PerlIO_funcs *tab = PerlIOBase(f)->tab;
else {
/*
* Is it good API design to do flush-all on NULL, a potentially
- * errorneous input? Maybe some magical value (PerlIO*
+ * erroneous input? Maybe some magical value (PerlIO*
* PERLIO_FLUSH_ALL = (PerlIO*)-1;)? Yes, stdio does similar
* things on fflush(NULL), but should we be bound by their design
* decisions? --jhi
*/
- PerlIO **table = &PL_perlio;
+ PerlIOl **table = &PL_perlio;
+ PerlIOl *ff;
int code = 0;
- while ((f = *table)) {
+ while ((ff = *table)) {
int i;
- table = (PerlIO **) (f++);
+ table = (PerlIOl **) (ff++);
for (i = 1; i < PERLIO_TABLE_SIZE; i++) {
- if (*f && PerlIO_flush(f) != 0)
+ if (ff->next && PerlIO_flush(&(ff->next)) != 0)
code = -1;
- f++;
+ ff++;
}
}
return code;
void
PerlIOBase_flush_linebuf(pTHX)
{
- dVAR;
- PerlIO **table = &PL_perlio;
- PerlIO *f;
+ PerlIOl **table = &PL_perlio;
+ PerlIOl *f;
while ((f = *table)) {
int i;
- table = (PerlIO **) (f++);
+ table = (PerlIOl **) (f++);
for (i = 1; i < PERLIO_TABLE_SIZE; i++) {
- if (*f
- && (PerlIOBase(f)->
+ if (f->next
+ && (PerlIOBase(&(f->next))->
flags & (PERLIO_F_LINEBUF | PERLIO_F_CANWRITE))
== (PERLIO_F_LINEBUF | PERLIO_F_CANWRITE))
- PerlIO_flush(f);
+ PerlIO_flush(&(f->next));
f++;
}
}
if (tab)
return (tab->Get_base != NULL);
- SETERRNO(EINVAL, LIB_INVARG);
}
- else
- SETERRNO(EBADF, SS_IVCHAN);
return 0;
}
int
PerlIO_fast_gets(PerlIO *f)
{
- if (PerlIOValid(f) && (PerlIOBase(f)->flags & PERLIO_F_FASTGETS)) {
- const PerlIO_funcs * const tab = PerlIOBase(f)->tab;
+ if (PerlIOValid(f)) {
+ if (PerlIOBase(f)->flags & PERLIO_F_FASTGETS) {
+ const PerlIO_funcs * const tab = PerlIOBase(f)->tab;
- if (tab)
- return (tab->Set_ptrcnt != NULL);
- SETERRNO(EINVAL, LIB_INVARG);
+ if (tab)
+ return (tab->Set_ptrcnt != NULL);
+ }
}
- else
- SETERRNO(EBADF, SS_IVCHAN);
return 0;
}
if (tab)
return (tab->Get_ptr != NULL && tab->Get_cnt != NULL);
- SETERRNO(EINVAL, LIB_INVARG);
}
- else
- SETERRNO(EBADF, SS_IVCHAN);
return 0;
}
if (tab)
return (tab->Set_ptrcnt != NULL);
- SETERRNO(EINVAL, LIB_INVARG);
}
- else
- SETERRNO(EBADF, SS_IVCHAN);
return 0;
}
Perl_PerlIO_or_fail(f, Get_base, NULL, (aTHX_ f));
}
-int
+SSize_t
Perl_PerlIO_get_bufsiz(pTHX_ PerlIO *f)
{
+ /* Note that Get_bufsiz returns a Size_t */
Perl_PerlIO_or_fail(f, Get_bufsiz, -1, (aTHX_ f));
}
Perl_PerlIO_or_fail(f, Get_ptr, NULL, (aTHX_ f));
}
-int
+SSize_t
Perl_PerlIO_get_cnt(pTHX_ PerlIO *f)
{
Perl_PerlIO_or_fail(f, Get_cnt, -1, (aTHX_ f));
}
void
-Perl_PerlIO_set_cnt(pTHX_ PerlIO *f, int cnt)
+Perl_PerlIO_set_cnt(pTHX_ PerlIO *f, SSize_t cnt)
{
Perl_PerlIO_or_fail_void(f, Set_ptrcnt, (aTHX_ f, NULL, cnt));
}
void
-Perl_PerlIO_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, int cnt)
+Perl_PerlIO_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt)
{
Perl_PerlIO_or_fail_void(f, Set_ptrcnt, (aTHX_ f, ptr, cnt));
}
PERL_UNUSED_ARG(mode);
PERL_UNUSED_ARG(arg);
if (PerlIOValid(f)) {
- if (tab->kind & PERLIO_K_UTF8)
+ if (tab && tab->kind & PERLIO_K_UTF8)
PerlIOBase(f)->flags |= PERLIO_F_UTF8;
else
PerlIOBase(f)->flags &= ~PERLIO_F_UTF8;
sizeof(PerlIO_funcs),
"utf8",
0,
- PERLIO_K_DUMMY | PERLIO_K_UTF8,
+ PERLIO_K_DUMMY | PERLIO_K_UTF8 | PERLIO_K_MULTIARG,
PerlIOUtf8_pushed,
NULL,
- NULL,
+ PerlIOBase_open,
NULL,
NULL,
NULL,
sizeof(PerlIO_funcs),
"bytes",
0,
- PERLIO_K_DUMMY,
+ PERLIO_K_DUMMY | PERLIO_K_MULTIARG,
PerlIOUtf8_pushed,
NULL,
- NULL,
+ PerlIOBase_open,
NULL,
NULL,
NULL,
NULL, /* set_ptrcnt */
};
-PerlIO *
-PerlIORaw_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers,
- IV n, const char *mode, int fd, int imode, int perm,
- PerlIO *old, int narg, SV **args)
-{
- PerlIO_funcs * const tab = PerlIO_default_btm();
- PERL_UNUSED_ARG(self);
- if (tab && tab->Open)
- return (*tab->Open) (aTHX_ tab, layers, n - 1, mode, fd, imode, perm,
- old, narg, args);
- SETERRNO(EINVAL, LIB_INVARG);
- return NULL;
-}
-
PERLIO_FUNCS_DECL(PerlIO_raw) = {
sizeof(PerlIO_funcs),
"raw",
PERLIO_K_DUMMY,
PerlIORaw_pushed,
PerlIOBase_popped,
- PerlIORaw_open,
+ PerlIOBase_open,
NULL,
NULL,
NULL,
l->flags &= ~(PERLIO_F_CANREAD | PERLIO_F_CANWRITE |
PERLIO_F_TRUNCATE | PERLIO_F_APPEND);
- if (tab->Set_ptrcnt != NULL)
+ if (tab && tab->Set_ptrcnt != NULL)
l->flags |= PERLIO_F_FASTGETS;
if (mode) {
if (*mode == IoTYPE_NUMERIC || *mode == IoTYPE_IMPLICIT)
}
#if 0
PerlIO_debug("PerlIOBase_pushed f=%p %s %s fl=%08" UVxf " (%s)\n",
- f, PerlIOBase(f)->tab->name, (omode) ? omode : "(Null)",
+ (void*)f, PerlIOBase(f)->tab->name, (omode) ? omode : "(Null)",
l->flags, PerlIO_modestr(f, temp));
#endif
return 0;
if (!(PerlIOBase(f)->flags & PERLIO_F_CANREAD)) {
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
SETERRNO(EBADF, SS_IVCHAN);
+ PerlIO_save_errno(f);
return 0;
}
while (count > 0) {
SSize_t avail = PerlIO_get_cnt(f);
SSize_t take = 0;
if (avail > 0)
- take = ((SSize_t)count < avail) ? count : avail;
+ take = (((SSize_t) count >= 0) && ((SSize_t)count < avail)) ? (SSize_t)count : avail;
if (take > 0) {
STDCHAR *ptr = PerlIO_get_ptr(f);
Copy(ptr, buf, take, STDCHAR);
{
if (!arg)
return NULL;
-#ifdef sv_dup
+#ifdef USE_ITHREADS
if (param) {
- return sv_dup(arg, param);
+ arg = sv_dup(arg, param);
+ SvREFCNT_inc_simple_void_NN(arg);
+ return arg;
}
else {
return newSVsv(arg);
}
if (f) {
PerlIO_funcs * const self = PerlIOBase(o)->tab;
- SV *arg;
+ SV *arg = NULL;
char buf[8];
+ assert(self);
PerlIO_debug("PerlIOBase_dup %s f=%p o=%p param=%p\n",
- self->name, (void*)f, (void*)o, (void*)param);
+ self->name,
+ (void*)f, (void*)o, (void*)param);
if (self->Getarg)
- arg = (*self->Getarg)(aTHX_ o, param, flags);
- else {
- arg = NULL;
- }
+ arg = (*self->Getarg)(aTHX_ o, param, flags);
f = PerlIO_push(aTHX_ f, self, PerlIO_modestr(o,buf), arg);
- if (arg) {
- SvREFCNT_dec(arg);
- }
+ if (f && PerlIOBase(o)->flags & PERLIO_F_UTF8)
+ PerlIOBase(f)->flags |= PERLIO_F_UTF8;
+ SvREFCNT_dec(arg);
}
return f;
}
-#ifdef USE_THREADS
-perl_mutex PerlIO_mutex;
-#endif
-
/* PL_perlio_fd_refcnt[] is in intrpvar.h */
-/* Must be called with PerlIO_mutex locked. */
+/* Must be called with PL_perlio_mutex locked. */
static void
-S_more_refcounted_fds(pTHX_ const int new_fd) {
+S_more_refcounted_fds(pTHX_ const int new_fd)
+ PERL_TSA_REQUIRES(PL_perlio_mutex)
+{
+ dVAR;
const int old_max = PL_perlio_fd_refcnt_size;
const int new_max = 16 + (new_fd & ~15);
int *new_array;
+#ifndef PERL_IMPLICIT_SYS
+ PERL_UNUSED_CONTEXT;
+#endif
+
PerlIO_debug("More fds - old=%d, need %d, new=%d\n",
old_max, new_fd, new_max);
assert (new_max > new_fd);
- new_array
- = PerlMemShared_realloc(PL_perlio_fd_refcnt, new_max * sizeof(int));
+ /* Use plain realloc() since we need this memory to be really
+ * global and visible to all the interpreters and/or threads. */
+ new_array = (int*) realloc(PL_perlio_fd_refcnt, new_max * sizeof(int));
if (!new_array) {
-#ifdef USE_THREADS
- MUTEX_UNLOCK(&PerlIO_mutex);
+#ifdef USE_ITHREADS
+ MUTEX_UNLOCK(&PL_perlio_mutex);
#endif
- /* Can't use PerlIO to write as it allocates memory */
- PerlLIO_write(PerlIO_fileno(Perl_error_log),
- PL_no_mem, strlen(PL_no_mem));
- my_exit(1);
+ croak_no_mem();
}
PL_perlio_fd_refcnt_size = new_max;
PL_perlio_fd_refcnt = new_array;
- PerlIO_debug("Zeroing %p, %d\n", new_array + old_max, new_max - old_max);
+ PerlIO_debug("Zeroing %p, %d\n",
+ (void*)(new_array + old_max),
+ new_max - old_max);
Zero(new_array + old_max, new_max - old_max, int);
}
void
PerlIO_init(pTHX)
{
- /* Place holder for stdstreams call ??? */
-#ifdef USE_THREADS
- MUTEX_INIT(&PerlIO_mutex);
-#else
+ /* MUTEX_INIT(&PL_perlio_mutex) is done in PERL_SYS_INIT3(). */
PERL_UNUSED_CONTEXT;
-#endif
}
void
if (fd >= 0) {
dVAR;
-#ifdef USE_THREADS
- MUTEX_LOCK(&PerlIO_mutex);
+#ifdef USE_ITHREADS
+ MUTEX_LOCK(&PL_perlio_mutex);
#endif
if (fd >= PL_perlio_fd_refcnt_size)
S_more_refcounted_fds(aTHX_ fd);
PL_perlio_fd_refcnt[fd]++;
- PerlIO_debug("fd %d refcnt=%d\n",fd,PL_perlio_fd_refcnt[fd]);
+ if (PL_perlio_fd_refcnt[fd] <= 0) {
+ /* diag_listed_as: refcnt_inc: fd %d%s */
+ Perl_croak(aTHX_ "refcnt_inc: fd %d: %d <= 0\n",
+ fd, PL_perlio_fd_refcnt[fd]);
+ }
+ PerlIO_debug("refcnt_inc: fd %d refcnt=%d\n",
+ fd, PL_perlio_fd_refcnt[fd]);
-#ifdef USE_THREADS
- MUTEX_UNLOCK(&PerlIO_mutex);
+#ifdef USE_ITHREADS
+ MUTEX_UNLOCK(&PL_perlio_mutex);
#endif
+ } else {
+ /* diag_listed_as: refcnt_inc: fd %d%s */
+ Perl_croak(aTHX_ "refcnt_inc: fd %d < 0\n", fd);
}
}
int
PerlIOUnix_refcnt_dec(int fd)
{
- dTHX;
int cnt = 0;
if (fd >= 0) {
dVAR;
-#ifdef USE_THREADS
- MUTEX_LOCK(&PerlIO_mutex);
+#ifdef USE_ITHREADS
+ MUTEX_LOCK(&PL_perlio_mutex);
#endif
- /* XXX should this be a panic? */
- if (fd >= PL_perlio_fd_refcnt_size)
- S_more_refcounted_fds(aTHX_ fd);
-
- /* XXX should this be a panic if it drops below 0? */
+ if (fd >= PL_perlio_fd_refcnt_size) {
+ /* diag_listed_as: refcnt_dec: fd %d%s */
+ Perl_croak_nocontext("refcnt_dec: fd %d >= refcnt_size %d\n",
+ fd, PL_perlio_fd_refcnt_size);
+ }
+ if (PL_perlio_fd_refcnt[fd] <= 0) {
+ /* diag_listed_as: refcnt_dec: fd %d%s */
+ Perl_croak_nocontext("refcnt_dec: fd %d: %d <= 0\n",
+ fd, PL_perlio_fd_refcnt[fd]);
+ }
cnt = --PL_perlio_fd_refcnt[fd];
- PerlIO_debug("fd %d refcnt=%d\n",fd,cnt);
-#ifdef USE_THREADS
- MUTEX_UNLOCK(&PerlIO_mutex);
+ PerlIO_debug("refcnt_dec: fd %d refcnt=%d\n", fd, cnt);
+#ifdef USE_ITHREADS
+ MUTEX_UNLOCK(&PL_perlio_mutex);
+#endif
+ } else {
+ /* diag_listed_as: refcnt_dec: fd %d%s */
+ Perl_croak_nocontext("refcnt_dec: fd %d < 0\n", fd);
+ }
+ return cnt;
+}
+
+int
+PerlIOUnix_refcnt(int fd)
+{
+ dTHX;
+ int cnt = 0;
+ if (fd >= 0) {
+ dVAR;
+#ifdef USE_ITHREADS
+ MUTEX_LOCK(&PL_perlio_mutex);
+#endif
+ if (fd >= PL_perlio_fd_refcnt_size) {
+ /* diag_listed_as: refcnt: fd %d%s */
+ Perl_croak(aTHX_ "refcnt: fd %d >= refcnt_size %d\n",
+ fd, PL_perlio_fd_refcnt_size);
+ }
+ if (PL_perlio_fd_refcnt[fd] <= 0) {
+ /* diag_listed_as: refcnt: fd %d%s */
+ Perl_croak(aTHX_ "refcnt: fd %d: %d <= 0\n",
+ fd, PL_perlio_fd_refcnt[fd]);
+ }
+ cnt = PL_perlio_fd_refcnt[fd];
+#ifdef USE_ITHREADS
+ MUTEX_UNLOCK(&PL_perlio_mutex);
#endif
+ } else {
+ /* diag_listed_as: refcnt: fd %d%s */
+ Perl_croak(aTHX_ "refcnt: fd %d < 0\n", fd);
}
return cnt;
}
void
PerlIO_cleanup(pTHX)
{
- dVAR;
int i;
#ifdef USE_ITHREADS
- PerlIO_debug("Cleanup layers for %p\n",aTHX);
+ PerlIO_debug("Cleanup layers for %p\n",(void*)aTHX);
#else
PerlIO_debug("Cleanup layers\n");
#endif
+
/* Raise STDIN..STDERR refcount so we don't close them */
for (i=0; i < 3; i++)
PerlIOUnix_refcnt_inc(i);
}
}
+void PerlIO_teardown(void) /* Call only from PERL_SYS_TERM(). */
+{
+ dVAR;
+#if 0
+/* XXX we can't rely on an interpreter being present at this late stage,
+ XXX so we can't use a function like PerlLIO_write that relies on one
+ being present (at least in win32) :-(.
+ Disable for now.
+*/
+#ifdef DEBUGGING
+ {
+ /* By now all filehandles should have been closed, so any
+ * stray (non-STD-)filehandles indicate *possible* (PerlIO)
+ * errors. */
+#define PERLIO_TEARDOWN_MESSAGE_BUF_SIZE 64
+#define PERLIO_TEARDOWN_MESSAGE_FD 2
+ char buf[PERLIO_TEARDOWN_MESSAGE_BUF_SIZE];
+ int i;
+ for (i = 3; i < PL_perlio_fd_refcnt_size; i++) {
+ if (PL_perlio_fd_refcnt[i]) {
+ const STRLEN len =
+ my_snprintf(buf, sizeof(buf),
+ "PerlIO_teardown: fd %d refcnt=%d\n",
+ i, PL_perlio_fd_refcnt[i]);
+ PerlLIO_write(PERLIO_TEARDOWN_MESSAGE_FD, buf, len);
+ }
+ }
+ }
+#endif
+#endif
+ /* Not bothering with PL_perlio_mutex since by now
+ * all the interpreters are gone. */
+ if (PL_perlio_fd_refcnt_size /* Assuming initial size of zero. */
+ && PL_perlio_fd_refcnt) {
+ free(PL_perlio_fd_refcnt); /* To match realloc() in S_more_refcounted_fds(). */
+ PL_perlio_fd_refcnt = NULL;
+ PL_perlio_fd_refcnt_size = 0;
+ }
+}
+
+/*--------------------------------------------------------------------------------------*/
+/*
+ * Bottom-most level for UNIX-like case
+ */
-
-/*--------------------------------------------------------------------------------------*/
-/*
- * Bottom-most level for UNIX-like case
- */
-
typedef struct {
struct _PerlIO base; /* The generic part */
int fd; /* UNIX like file descriptor */
int oflags; /* open/fcntl flags */
} PerlIOUnix;
+static void
+S_lockcnt_dec(pTHX_ const void* f)
+{
+#ifndef PERL_IMPLICIT_SYS
+ PERL_UNUSED_CONTEXT;
+#endif
+ PerlIO_lockcnt((PerlIO*)f)--;
+}
+
+
+/* call the signal handler, and if that handler happens to clear
+ * this handle, free what we can and return true */
+
+static bool
+S_perlio_async_run(pTHX_ PerlIO* f) {
+ ENTER;
+ SAVEDESTRUCTOR_X(S_lockcnt_dec, (void*)f);
+ PerlIO_lockcnt(f)++;
+ PERL_ASYNC_CHECK();
+ if ( !(PerlIOBase(f)->flags & PERLIO_F_CLEARED) ) {
+ LEAVE;
+ return 0;
+ }
+ /* we've just run some perl-level code that could have done
+ * anything, including closing the file or clearing this layer.
+ * If so, free any lower layers that have already been
+ * cleared, then return an error. */
+ while (PerlIOValid(f) &&
+ (PerlIOBase(f)->flags & PERLIO_F_CLEARED))
+ {
+ const PerlIOl *l = *f;
+ *f = l->next;
+ Safefree(l);
+ }
+ LEAVE;
+ return 1;
+}
+
int
PerlIOUnix_oflags(const char *mode)
{
oflags |= O_WRONLY;
break;
}
- if (*mode == 'b') {
- oflags |= O_BINARY;
+
+ /* XXX TODO: PerlIO_open() test that exercises 'rb' and 'rt'. */
+
+ /* Unless O_BINARY is different from O_TEXT, first bit-or:ing one
+ * of them in, and then bit-and-masking the other them away, won't
+ * have much of an effect. */
+ switch (*mode) {
+ case 'b':
+#if O_TEXT != O_BINARY
+ oflags |= O_BINARY;
oflags &= ~O_TEXT;
- mode++;
- }
- else if (*mode == 't') {
+#endif
+ mode++;
+ break;
+ case 't':
+#if O_TEXT != O_BINARY
oflags |= O_TEXT;
oflags &= ~O_BINARY;
- mode++;
+#endif
+ mode++;
+ break;
+ default:
+# if O_BINARY != 0
+ /* bit-or:ing with zero O_BINARY would be useless. */
+ /*
+ * If neither "t" nor "b" was specified, open the file
+ * in O_BINARY mode.
+ *
+ * Note that if something else than the zero byte was seen
+ * here (e.g. bogus mode "rx"), just few lines later we will
+ * set the errno and invalidate the flags.
+ */
+ oflags |= O_BINARY;
+# endif
+ break;
}
- /*
- * Always open in binary mode
- */
- oflags |= O_BINARY;
if (*mode || oflags == -1) {
SETERRNO(EINVAL, LIB_INVARG);
oflags = -1;
int perm, PerlIO *f, int narg, SV **args)
{
if (PerlIOValid(f)) {
- if (PerlIOBase(f)->flags & PERLIO_F_OPEN)
+ if (PerlIOBase(f)->tab && PerlIOBase(f)->flags & PERLIO_F_OPEN)
(*PerlIOBase(f)->tab->Close)(aTHX_ f);
}
if (narg > 0) {
mode++;
else {
imode = PerlIOUnix_oflags(mode);
+#ifdef VMS
+ perm = 0777; /* preserve RMS defaults, ACL inheritance, etc. */
+#else
perm = 0666;
+#endif
}
if (imode != -1) {
- const char *path = SvPV_nolen_const(*args);
+ STRLEN len;
+ const char *path = SvPV_const(*args, len);
+ if (!IS_SAFE_PATHNAME(path, len, "open"))
+ return NULL;
fd = PerlLIO_open3(path, imode, perm);
}
}
}
if (!PerlIOValid(f)) {
if (!(f = PerlIO_push(aTHX_ f, self, mode, PerlIOArg))) {
+ PerlLIO_close(fd);
return NULL;
}
}
}
else {
if (f) {
- /*EMPTY*/;
+ NOOP;
/*
* FIXME: pop layers ???
*/
PerlIOUnix_setfd(aTHX_ f, fd, os->oflags);
return f;
}
+ PerlLIO_close(fd);
}
return NULL;
}
SSize_t
PerlIOUnix_read(pTHX_ PerlIO *f, void *vbuf, Size_t count)
{
- dVAR;
- const int fd = PerlIOSelf(f, PerlIOUnix)->fd;
+ int fd;
+ if (PerlIO_lockcnt(f)) /* in use: abort ungracefully */
+ return -1;
+ fd = PerlIOSelf(f, PerlIOUnix)->fd;
#ifdef PERLIO_STD_SPECIAL
if (fd == 0)
return PERLIO_STD_IN(fd, vbuf, count);
if (len < 0) {
if (errno != EAGAIN) {
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
+ PerlIO_save_errno(f);
}
}
else if (len == 0 && count != 0) {
}
return len;
}
- PERL_ASYNC_CHECK();
+ /* EINTR */
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
}
- /*NOTREACHED*/
+ NOT_REACHED; /*NOTREACHED*/
}
SSize_t
PerlIOUnix_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
{
- dVAR;
- const int fd = PerlIOSelf(f, PerlIOUnix)->fd;
+ int fd;
+ if (PerlIO_lockcnt(f)) /* in use: abort ungracefully */
+ return -1;
+ fd = PerlIOSelf(f, PerlIOUnix)->fd;
#ifdef PERLIO_STD_SPECIAL
if (fd == 1 || fd == 2)
return PERLIO_STD_OUT(fd, vbuf, count);
if (len < 0) {
if (errno != EAGAIN) {
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
+ PerlIO_save_errno(f);
}
}
return len;
}
- PERL_ASYNC_CHECK();
+ /* EINTR */
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
}
- /*NOTREACHED*/
+ NOT_REACHED; /*NOTREACHED*/
}
Off_t
IV
PerlIOUnix_close(pTHX_ PerlIO *f)
{
- dVAR;
const int fd = PerlIOSelf(f, PerlIOUnix)->fd;
int code = 0;
if (PerlIOBase(f)->flags & PERLIO_F_OPEN) {
code = -1;
break;
}
- PERL_ASYNC_CHECK();
+ /* EINTR */
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
}
if (code == 0) {
PerlIOBase(f)->flags &= ~PERLIO_F_OPEN;
PerlIOSelf(f, PerlIOStdio)->stdio = stdio;
/* We never call down so do any pending stuff now */
PerlIO_flush(PerlIONext(f));
+ return PerlIOBase_pushed(aTHX_ f, mode, arg, tab);
}
else {
return -1;
{
dTHX;
PerlIO *f = NULL;
+#ifdef EBCDIC
+ int rc;
+ char filename[FILENAME_MAX];
+ fldata_t fileinfo;
+#endif
if (stdio) {
PerlIOStdio *s;
+ int fd0 = fileno(stdio);
+ if (fd0 < 0) {
+#ifdef EBCDIC
+ rc = fldata(stdio,filename,&fileinfo);
+ if(rc != 0){
+ return NULL;
+ }
+ if(fileinfo.__dsorgHFS){
+ return NULL;
+ }
+ /*This MVS dataset , OK!*/
+#else
+ return NULL;
+#endif
+ }
if (!mode || !*mode) {
/* We need to probe to see how we can open the stream
so start with read/write and then try write and read
Note that the errno value set by a failing fdopen
varies between stdio implementations.
*/
- const int fd = PerlLIO_dup(fileno(stdio));
- FILE *f2 = PerlSIO_fdopen(fd, (mode = "r+"));
+ const int fd = PerlLIO_dup(fd0);
+ FILE *f2;
+ if (fd < 0) {
+ return f;
+ }
+ f2 = PerlSIO_fdopen(fd, (mode = "r+"));
if (!f2) {
f2 = PerlSIO_fdopen(fd, (mode = "w"));
}
}
fclose(f2);
}
- if ((f = PerlIO_push(aTHX_(f = PerlIO_allocate(aTHX)), PERLIO_FUNCS_CAST(&PerlIO_stdio), mode, NULL))) {
+ if ((f = PerlIO_push(aTHX_(PerlIO_allocate(aTHX)), PERLIO_FUNCS_CAST(&PerlIO_stdio), mode, NULL))) {
s = PerlIOSelf(f, PerlIOStdio);
s->stdio = stdio;
+#ifdef EBCDIC
+ fd0 = fileno(stdio);
+ if(fd0 != -1){
+ PerlIOUnix_refcnt_inc(fd0);
+ }
+ else{
+ rc = fldata(stdio,filename,&fileinfo);
+ if(rc != 0){
+ PerlIOUnix_refcnt_inc(fd0);
+ }
+ if(fileinfo.__dsorgHFS){
+ PerlIOUnix_refcnt_inc(fd0);
+ }
+ /*This MVS dataset , OK!*/
+ }
+#else
+ PerlIOUnix_refcnt_inc(fileno(stdio));
+#endif
}
}
return f;
{
char tmode[8];
if (PerlIOValid(f)) {
- const char * const path = SvPV_nolen_const(*args);
+ STRLEN len;
+ const char * const path = SvPV_const(*args, len);
PerlIOStdio * const s = PerlIOSelf(f, PerlIOStdio);
FILE *stdio;
+ if (!IS_SAFE_PATHNAME(path, len, "open"))
+ return NULL;
PerlIOUnix_refcnt_dec(fileno(s->stdio));
- stdio = PerlSIO_freopen(path, (mode = PerlIOStdio_mode(mode, tmode)),
- s->stdio);
+ stdio = PerlSIO_freopen(path, PerlIOStdio_mode(mode, tmode),
+ s->stdio);
if (!s->stdio)
return NULL;
s->stdio = stdio;
}
else {
if (narg > 0) {
- const char * const path = SvPV_nolen_const(*args);
+ STRLEN len;
+ const char * const path = SvPV_const(*args, len);
+ if (!IS_SAFE_PATHNAME(path, len, "open"))
+ return NULL;
if (*mode == IoTYPE_NUMERIC) {
mode++;
fd = PerlLIO_open3(path, imode, perm);
}
return f;
}
+ PerlLIO_close(fd);
}
}
return NULL;
goto set_this;
}
else {
- /*EMPTY*/;
+ NOOP;
/* FIXME: To avoid messy error recovery if dup fails
re-use the existing stdio as though flag was not set
*/
stdio = PerlSIO_fdopen(fd, PerlIO_modestr(o,mode));
set_this:
PerlIOSelf(f, PerlIOStdio)->stdio = stdio;
- PerlIOUnix_refcnt_inc(fileno(stdio));
+ if(stdio) {
+ PerlIOUnix_refcnt_inc(fileno(stdio));
+ }
}
return f;
}
/* XXX this could use PerlIO_canset_fileno() and
* PerlIO_set_fileno() support from Configure
*/
-# if defined(__UCLIBC__)
+# if defined(HAS_FDCLOSE)
+ return fdclose(f, NULL) == 0 ? 1 : 0;
+# elif defined(__UCLIBC__)
/* uClibc must come before glibc because it defines __GLIBC__ as well. */
f->__filedes = -1;
return 1;
*/
f->_fileno = -1;
return 1;
-# elif defined(__sun__)
+# elif defined(__sun)
+ PERL_UNUSED_ARG(f);
return 0;
# elif defined(__hpux)
f->__fileH = 0xff;
f->_file = -1;
return 1;
# elif defined(WIN32)
-# if defined(__BORLANDC__)
- f->fd = PerlLIO_dup(fileno(f));
-# elif defined(UNDER_CE)
+# if defined(UNDER_CE)
/* WIN_CE does not have access to FILE internals, it hardly has FILE
structure at all
*/
const int fd = fileno(stdio);
int invalidate = 0;
IV result = 0;
- int saveerr = 0;
- int dupfd = 0;
+ int dupfd = -1;
+ dSAVEDERRNO;
+#ifdef USE_ITHREADS
+ dVAR;
+#endif
#ifdef SOCKS5_VERSION_NAME
/* Socks lib overrides close() but stdio isn't linked to
that library (though we are) - so we must call close()
if (getsockopt(fd, SOL_SOCKET, SO_TYPE, (void *) &optval, &optlen) == 0)
invalidate = 1;
#endif
- if (PerlIOUnix_refcnt_dec(fd) > 0) /* File descriptor still in use */
+ /* Test for -1, as *BSD stdio (at least) on fclose sets the FILE* such
+ that a subsequent fileno() on it returns -1. Don't want to croak()
+ from within PerlIOUnix_refcnt_dec() if some buggy caller code is
+ trying to close an already closed handle which somehow it still has
+ a reference to. (via.xs, I'm looking at you). */
+ if (fd != -1 && PerlIOUnix_refcnt_dec(fd) > 0) {
+ /* File descriptor still in use */
invalidate = 1;
+ }
if (invalidate) {
/* For STD* handles, don't close stdio, since we shared the FILE *, too. */
if (stdio == stdin) /* Some stdios are buggy fflush-ing inputs */
return 0;
if (stdio == stdout || stdio == stderr)
return PerlIO_flush(f);
+ }
+#ifdef USE_ITHREADS
+ MUTEX_LOCK(&PL_perlio_mutex);
+ /* Right. We need a mutex here because for a brief while we
+ will have the situation that fd is actually closed. Hence if
+ a second thread were to get into this block, its dup() would
+ likely return our fd as its dupfd. (after all, it is closed)
+ Then if we get to the dup2() first, we blat the fd back
+ (messing up its temporary as a side effect) only for it to
+ then close its dupfd (== our fd) in its close(dupfd) */
+
+ /* There is, of course, a race condition, that any other thread
+ trying to input/output/whatever on this fd will be stuffed
+ for the duration of this little manoeuvrer. Perhaps we
+ should hold an IO mutex for the duration of every IO
+ operation if we know that invalidate doesn't work on this
+ platform, but that would suck, and could kill performance.
+
+ Except that correctness trumps speed.
+ Advice from klortho #11912. */
+#endif
+ if (invalidate) {
/* Tricky - must fclose(stdio) to free memory but not close(fd)
Use Sarathy's trick from maint-5.6 to invalidate the
fileno slot of the FILE *
*/
result = PerlIO_flush(f);
- saveerr = errno;
+ SAVE_ERRNO;
invalidate = PerlIOStdio_invalidate_fileno(aTHX_ stdio);
- if (!invalidate)
+ if (!invalidate) {
dupfd = PerlLIO_dup(fd);
+#ifdef USE_ITHREADS
+ if (dupfd < 0) {
+ /* Oh cXap. This isn't going to go well. Not sure if we can
+ recover from here, or if closing this particular FILE *
+ is a good idea now. */
+ }
+#endif
+ }
+ } else {
+ SAVE_ERRNO; /* This is here only to silence compiler warnings */
}
result = PerlSIO_fclose(stdio);
/* We treat error from stdio as success if we invalidated
errno may NOT be expected EBADF
*/
if (invalidate && result != 0) {
- errno = saveerr;
+ RESTORE_ERRNO;
result = 0;
}
#ifdef SOCKS5_VERSION_NAME
/* in SOCKS' case, let close() determine return value */
result = close(fd);
#endif
- if (dupfd) {
+ if (dupfd >= 0) {
PerlLIO_dup2(dupfd,fd);
PerlLIO_close(dupfd);
}
+#ifdef USE_ITHREADS
+ MUTEX_UNLOCK(&PL_perlio_mutex);
+#endif
return result;
}
}
SSize_t
PerlIOStdio_read(pTHX_ PerlIO *f, void *vbuf, Size_t count)
{
- dVAR;
- FILE * const s = PerlIOSelf(f, PerlIOStdio)->stdio;
+ FILE * s;
SSize_t got = 0;
+ if (PerlIO_lockcnt(f)) /* in use: abort ungracefully */
+ return -1;
+ s = PerlIOSelf(f, PerlIOStdio)->stdio;
for (;;) {
if (count == 1) {
STDCHAR *buf = (STDCHAR *) vbuf;
got = -1;
if (got >= 0 || errno != EINTR)
break;
- PERL_ASYNC_CHECK();
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
SETERRNO(0,0); /* just in case */
}
+#ifdef __sgi
+ /* Under some circumstances IRIX stdio fgetc() and fread()
+ * set the errno to ENOENT, which makes no sense according
+ * to either IRIX or POSIX. [rt.perl.org #123977] */
+ if (errno == ENOENT) SETERRNO(0,0);
+#endif
return got;
}
}
if ((STDCHAR*)PerlSIO_get_ptr(s) != --eptr || ((*eptr & 0xFF) != ch)) {
/* Did not change pointer as expected */
- fgetc(s); /* get char back again */
- break;
+ if (fgetc(s) != EOF) /* get char back again */
+ break;
}
/* It worked ! */
count--;
SSize_t
PerlIOStdio_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
{
- dVAR;
SSize_t got;
+ if (PerlIO_lockcnt(f)) /* in use: abort ungracefully */
+ return -1;
for (;;) {
got = PerlSIO_fwrite(vbuf, 1, count,
PerlIOSelf(f, PerlIOStdio)->stdio);
if (got >= 0 || errno != EINTR)
break;
- PERL_ASYNC_CHECK();
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
SETERRNO(0,0); /* just in case */
}
return got;
return PerlSIO_fflush(stdio);
}
else {
- /*EMPTY*/;
+ NOOP;
#if 0
/*
* FIXME: This discards ungetc() and pre-read stuff which is not
/*
* Not writeable - sync by attempting a seek
*/
- const int err = errno;
+ dSAVE_ERRNO;
if (PerlSIO_fseek(stdio, (Off_t) 0, SEEK_CUR) != 0)
- errno = err;
+ RESTORE_ERRNO;
#endif
}
return 0;
FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio;
if (ptr != NULL) {
#ifdef STDIO_PTR_LVALUE
- PerlSIO_set_ptr(stdio, (void*)ptr); /* LHS STDCHAR* cast non-portable */
+ /* This is a long-standing infamous mess. The root of the
+ * problem is that one cannot know the signedness of char, and
+ * more precisely the signedness of FILE._ptr. The following
+ * things have been tried, and they have all failed (across
+ * different compilers (remember that core needs to to build
+ * also with c++) and compiler options:
+ *
+ * - casting the RHS to (void*) -- works in *some* places
+ * - casting the LHS to (void*) -- totally unportable
+ *
+ * So let's try silencing the warning at least for gcc. */
+ GCC_DIAG_IGNORE(-Wpointer-sign);
+ PerlSIO_set_ptr(stdio, ptr); /* LHS STDCHAR* cast non-portable */
+ GCC_DIAG_RESTORE;
#ifdef STDIO_PTR_LVAL_SETS_CNT
- if (PerlSIO_get_cnt(stdio) != (cnt)) {
- assert(PerlSIO_get_cnt(stdio) == (cnt));
- }
+ assert(PerlSIO_get_cnt(stdio) == (cnt));
#endif
#if (!defined(STDIO_PTR_LVAL_NOCHANGE_CNT))
/*
IV
PerlIOStdio_fill(pTHX_ PerlIO *f)
{
- FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio;
+ FILE * stdio;
int c;
PERL_UNUSED_CONTEXT;
+ if (PerlIO_lockcnt(f)) /* in use: abort ungracefully */
+ return -1;
+ stdio = PerlIOSelf(f, PerlIOStdio)->stdio;
/*
* fflush()ing read-only streams can cause trouble on some stdio-s
if (PerlSIO_fflush(stdio) != 0)
return EOF;
}
- c = PerlSIO_fgetc(stdio);
- if (c == EOF)
- return EOF;
+ for (;;) {
+ c = PerlSIO_fgetc(stdio);
+ if (c != EOF)
+ break;
+ if (! PerlSIO_ferror(stdio) || errno != EINTR)
+ return EOF;
+ if (PL_sig_pending && S_perlio_async_run(aTHX_ f))
+ return -1;
+ SETERRNO(0,0);
+ }
#if (defined(STDIO_PTR_LVALUE) && (defined(STDIO_CNT_LVALUE) || defined(STDIO_PTR_LVAL_SETS_CNT)))
}
#endif
-#if defined(VMS)
- /* An ungetc()d char is handled separately from the regular
- * buffer, so we stuff it in the buffer ourselves.
- * Should never get called as should hit code above
- */
- *(--((*stdio)->_ptr)) = (unsigned char) c;
- (*stdio)->_cnt++;
-#else
/* If buffer snoop scheme above fails fall back to
using ungetc().
*/
if (PerlSIO_ungetc(c, stdio) != c)
return EOF;
-#endif
+
return 0;
}
FILE *stdio = NULL;
if (PerlIOValid(f)) {
char buf[8];
+ int fd = PerlIO_fileno(f);
+ if (fd < 0) {
+ return NULL;
+ }
PerlIO_flush(f);
if (!mode || !*mode) {
mode = PerlIO_modestr(f, buf);
if ((f2 = PerlIO_push(aTHX_ f, PERLIO_FUNCS_CAST(&PerlIO_stdio), buf, NULL))) {
PerlIOStdio *s = PerlIOSelf((f = f2), PerlIOStdio);
s->stdio = stdio;
+ PerlIOUnix_refcnt_inc(fileno(stdio));
/* Link previous lower layers under new one */
*PerlIONext(f) = l;
}
PerlIO_findFILE(PerlIO *f)
{
PerlIOl *l = *f;
+ FILE *stdio;
while (l) {
if (l->tab == &PerlIO_stdio) {
PerlIOStdio *s = PerlIOSelf(&l, PerlIOStdio);
l = *PerlIONext(&l);
}
/* Uses fallback "mode" via PerlIO_modestr() in PerlIO_exportFILE */
- return PerlIO_exportFILE(f, NULL);
+ /* However, we're not really exporting a FILE * to someone else (who
+ becomes responsible for closing it, or calling PerlIO_releaseFILE())
+ So we need to undo its reference count increase on the underlying file
+ descriptor. We have to do this, because if the loop above returns you
+ the FILE *, then *it* didn't increase any reference count. So there's
+ only one way to be consistent. */
+ stdio = PerlIO_exportFILE(f, NULL);
+ if (stdio) {
+ const int fd = fileno(stdio);
+ if (fd >= 0)
+ PerlIOUnix_refcnt_dec(fd);
+ }
+ return stdio;
}
/* Use this to reverse PerlIO_exportFILE calls. */
void
PerlIO_releaseFILE(PerlIO *p, FILE *f)
{
- dVAR;
PerlIOl *l;
while ((l = *p)) {
if (l->tab == &PerlIO_stdio) {
PerlIOStdio *s = PerlIOSelf(&l, PerlIOStdio);
- if (s->stdio == f) {
- dTHX;
- PerlIO_pop(aTHX_ p);
+ if (s->stdio == f) { /* not in a loop */
+ const int fd = fileno(f);
+ if (fd >= 0)
+ PerlIOUnix_refcnt_dec(fd);
+ {
+ dTHX;
+ PerlIO_pop(aTHX_ p);
+ }
return;
}
}
*/
PerlLIO_setmode(fd, O_BINARY);
#endif
+#ifdef VMS
+ /* Enable line buffering with record-oriented regular files
+ * so we don't introduce an extraneous record boundary when
+ * the buffer fills up.
+ */
+ if (PerlIOBase(f)->flags & PERLIO_F_CANWRITE) {
+ Stat_t st;
+ if (PerlLIO_fstat(fd, &st) == 0
+ && S_ISREG(st.st_mode)
+ && (st.st_fab_rfm == FAB$C_VAR
+ || st.st_fab_rfm == FAB$C_VFC)) {
+ PerlIOBase(f)->flags |= PERLIO_F_LINEBUF;
+ }
+ }
+#endif
}
}
}
}
else if (count < 0 || PerlIO_error(n)) {
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
+ PerlIO_save_errno(f);
code = -1;
break;
}
if (avail == 0)
PerlIOBase(f)->flags |= PERLIO_F_EOF;
else
+ {
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
+ PerlIO_save_errno(f);
+ }
return -1;
}
b->end = b->buf + avail;
*/
b->posn -= b->bufsiz;
}
- if (avail > (SSize_t) count) {
+ if ((SSize_t) count >= 0 && avail > (SSize_t) count) {
/*
* If we have space for more than count, just move count
*/
}
while (count > 0) {
SSize_t avail = b->bufsiz - (b->ptr - b->buf);
- if ((SSize_t) count < avail)
+ if ((SSize_t) count >= 0 && (SSize_t) count < avail)
avail = count;
if (flushptr > buf && flushptr <= buf + avail)
avail = flushptr - buf;
PerlIO_flush(f);
}
if (b->ptr >= (b->buf + b->bufsiz))
- PerlIO_flush(f);
+ if (PerlIO_flush(f) == -1)
+ return -1;
}
if (PerlIOBase(f)->flags & PERLIO_F_UNBUF)
PerlIO_flush(f);
if (!b->buf) {
if (!b->bufsiz)
- b->bufsiz = 4096;
- b->buf = Newxz(b->buf,b->bufsiz, STDCHAR);
+ b->bufsiz = PERLIOBUF_DEFAULT_BUFSIZ;
+ Newxz(b->buf,b->bufsiz, STDCHAR);
if (!b->buf) {
b->buf = (STDCHAR *) & b->oneword;
b->bufsiz = sizeof(b->oneword);
PerlIOBuf_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt)
{
PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf);
+#ifndef DEBUGGING
+ PERL_UNUSED_ARG(cnt);
+#endif
if (!b->buf)
PerlIO_get_base(f);
b->ptr = ptr;
- if (PerlIO_get_cnt(f) != cnt || b->ptr < b->buf) {
- assert(PerlIO_get_cnt(f) == cnt);
- assert(b->ptr >= b->buf);
- }
+ assert(PerlIO_get_cnt(f) == cnt);
+ assert(b->ptr >= b->buf);
PerlIOBase(f)->flags |= PERLIO_F_RDBUF;
}
{
SSize_t avail = PerlIO_get_cnt(f);
SSize_t got = 0;
- if ((SSize_t)count < avail)
+ if ((SSize_t) count >= 0 && (SSize_t)count < avail)
avail = count;
if (avail > 0)
got = PerlIOBuf_read(aTHX_ f, vbuf, avail);
* buffer */
} PerlIOCrlf;
+/* Inherit the PERLIO_F_UTF8 flag from previous layer.
+ * Otherwise the :crlf layer would always revert back to
+ * raw mode.
+ */
+static void
+S_inherit_utf8_flag(PerlIO *f)
+{
+ PerlIO *g = PerlIONext(f);
+ if (PerlIOValid(g)) {
+ if (PerlIOBase(g)->flags & PERLIO_F_UTF8) {
+ PerlIOBase(f)->flags |= PERLIO_F_UTF8;
+ }
+ }
+}
+
IV
PerlIOCrlf_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab)
{
code = PerlIOBuf_pushed(aTHX_ f, mode, arg, tab);
#if 0
PerlIO_debug("PerlIOCrlf_pushed f=%p %s %s fl=%08" UVxf "\n",
- f, PerlIOBase(f)->tab->name, (mode) ? mode : "(Null)",
+ (void*)f, PerlIOBase(f)->tab->name, (mode) ? mode : "(Null)",
PerlIOBase(f)->flags);
#endif
{
- /* Enable the first CRLF capable layer you can find, but if none
- * found, the one we just pushed is fine. This results in at
- * any given moment at most one CRLF-capable layer being enabled
- * in the whole layer stack. */
+ /* If the old top layer is a CRLF layer, reactivate it (if
+ * necessary) and remove this new layer from the stack */
PerlIO *g = PerlIONext(f);
- while (g && *g) {
+ if (PerlIOValid(g)) {
PerlIOl *b = PerlIOBase(g);
if (b && b->tab == &PerlIO_crlf) {
if (!(b->flags & PERLIO_F_CRLF))
b->flags |= PERLIO_F_CRLF;
+ S_inherit_utf8_flag(g);
PerlIO_pop(aTHX_ f);
return code;
- }
- g = PerlIONext(g);
+ }
}
}
+ S_inherit_utf8_flag(f);
return code;
}
{
PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf);
if (c->nl) { /* XXXX Shouldn't it be done only if b->ptr > c->nl? */
- *(c->nl) = 0xd;
+ *(c->nl) = NATIVE_0xd;
c->nl = NULL;
}
if (!(PerlIOBase(f)->flags & PERLIO_F_CRLF))
const int ch = *--buf;
if (ch == '\n') {
if (b->ptr - 2 >= b->buf) {
- *--(b->ptr) = 0xa;
- *--(b->ptr) = 0xd;
+ *--(b->ptr) = NATIVE_0xa;
+ *--(b->ptr) = NATIVE_0xd;
unread++;
count--;
}
else {
/* If b->ptr - 1 == b->buf, we are undoing reading 0xa */
- *--(b->ptr) = 0xa; /* Works even if 0xa == '\r' */
+ *--(b->ptr) = NATIVE_0xa; /* Works even if 0xa ==
+ '\r' */
unread++;
count--;
}
}
}
}
+ if (count > 0)
+ unread += PerlIOBase_unread(aTHX_ f, (const STDCHAR *) vbuf + unread, count);
return unread;
}
}
PerlIO_get_base(f);
if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) {
PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf);
- if ((PerlIOBase(f)->flags & PERLIO_F_CRLF) && (!c->nl || *c->nl == 0xd)) {
+ if ((PerlIOBase(f)->flags & PERLIO_F_CRLF) && (!c->nl || *c->nl == NATIVE_0xd)) {
STDCHAR *nl = (c->nl) ? c->nl : b->ptr;
scan:
- while (nl < b->end && *nl != 0xd)
+ while (nl < b->end && *nl != NATIVE_0xd)
nl++;
- if (nl < b->end && *nl == 0xd) {
+ if (nl < b->end && *nl == NATIVE_0xd) {
test:
if (nl + 1 < b->end) {
- if (nl[1] == 0xa) {
+ if (nl[1] == NATIVE_0xa) {
*nl = '\n';
c->nl = nl;
}
b->buf--; /* Point at space */
b->ptr = nl = b->buf; /* Which is what we hand
* off */
- *nl = 0xd; /* Fill in the CR */
+ *nl = NATIVE_0xd; /* Fill in the CR */
if (code == 0)
goto test; /* fill() call worked */
/*
if (!ptr) {
if (c->nl) {
ptr = c->nl + 1;
- if (ptr == b->end && *c->nl == 0xd) {
- /* Defered CR at end of buffer case - we lied about count */
+ if (ptr == b->end && *c->nl == NATIVE_0xd) {
+ /* Deferred CR at end of buffer case - we lied about count */
ptr--;
}
}
ptr -= cnt;
}
else {
- /*EMPTY*/;
+ NOOP;
#if 0
/*
* Test code - delete when it works ...
*/
IV flags = PerlIOBase(f)->flags;
STDCHAR *chk = (c->nl) ? (c->nl+1) : b->end;
- if (ptr+cnt == c->nl && c->nl+1 == b->end && *c->nl == 0xd) {
- /* Defered CR at end of buffer case - we lied about count */
+ if (ptr+cnt == c->nl && c->nl+1 == b->end && *c->nl == NATIVE_0xd) {
+ /* Deferred CR at end of buffer case - we lied about count */
chk--;
}
chk -= cnt;
if (ptr != chk ) {
Perl_croak(aTHX_ "ptr wrong %p != %p fl=%08" UVxf
- " nl=%p e=%p for %d", ptr, chk, flags, c->nl,
- b->end, cnt);
+ " nl=%p e=%p for %d", (void*)ptr, (void*)chk,
+ flags, c->nl, b->end, cnt);
}
#endif
}
/*
* They have taken what we lied about
*/
- *(c->nl) = 0xd;
+ *(c->nl) = NATIVE_0xd;
c->nl = NULL;
ptr++;
}
break;
}
else {
- *(b->ptr)++ = 0xd; /* CR */
- *(b->ptr)++ = 0xa; /* LF */
+ *(b->ptr)++ = NATIVE_0xd; /* CR */
+ *(b->ptr)++ = NATIVE_0xa; /* LF */
buf++;
if (PerlIOBase(f)->flags & PERLIO_F_LINEBUF) {
PerlIO_flush(f);
{
PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf);
if (c->nl) {
- *(c->nl) = 0xd;
+ *(c->nl) = NATIVE_0xd;
c->nl = NULL;
}
return PerlIOBuf_flush(aTHX_ f);
PerlIOBase(f)->flags &= ~PERLIO_F_CRLF;
#ifndef PERLIO_USING_CRLF
/* CRLF is unusual case - if this is just the :crlf layer pop it */
- if (PerlIOBase(f)->tab == &PerlIO_crlf) {
- PerlIO_pop(aTHX_ f);
- }
+ PerlIO_pop(aTHX_ f);
#endif
}
return 0;
PerlIOCrlf_set_ptrcnt,
};
-#ifdef HAS_MMAP
-/*--------------------------------------------------------------------------------------*/
-/*
- * mmap as "buffer" layer
- */
-
-typedef struct {
- PerlIOBuf base; /* PerlIOBuf stuff */
- Mmap_t mptr; /* Mapped address */
- Size_t len; /* mapped length */
- STDCHAR *bbuf; /* malloced buffer if map fails */
-} PerlIOMmap;
-
-IV
-PerlIOMmap_map(pTHX_ PerlIO *f)
-{
- dVAR;
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- const IV flags = PerlIOBase(f)->flags;
- IV code = 0;
- if (m->len)
- abort();
- if (flags & PERLIO_F_CANREAD) {
- PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf);
- const int fd = PerlIO_fileno(f);
- Stat_t st;
- code = Fstat(fd, &st);
- if (code == 0 && S_ISREG(st.st_mode)) {
- SSize_t len = st.st_size - b->posn;
- if (len > 0) {
- Off_t posn;
- if (PL_mmap_page_size <= 0)
- Perl_croak(aTHX_ "panic: bad pagesize %" IVdf,
- PL_mmap_page_size);
- if (b->posn < 0) {
- /*
- * This is a hack - should never happen - open should
- * have set it !
- */
- b->posn = PerlIO_tell(PerlIONext(f));
- }
- posn = (b->posn / PL_mmap_page_size) * PL_mmap_page_size;
- len = st.st_size - posn;
- m->mptr = mmap(NULL, len, PROT_READ, MAP_SHARED, fd, posn);
- if (m->mptr && m->mptr != (Mmap_t) - 1) {
-#if 0 && defined(HAS_MADVISE) && defined(MADV_SEQUENTIAL)
- madvise(m->mptr, len, MADV_SEQUENTIAL);
-#endif
-#if 0 && defined(HAS_MADVISE) && defined(MADV_WILLNEED)
- madvise(m->mptr, len, MADV_WILLNEED);
-#endif
- PerlIOBase(f)->flags =
- (flags & ~PERLIO_F_EOF) | PERLIO_F_RDBUF;
- b->end = ((STDCHAR *) m->mptr) + len;
- b->buf = ((STDCHAR *) m->mptr) + (b->posn - posn);
- b->ptr = b->buf;
- m->len = len;
- }
- else {
- b->buf = NULL;
- }
- }
- else {
- PerlIOBase(f)->flags =
- flags | PERLIO_F_EOF | PERLIO_F_RDBUF;
- b->buf = NULL;
- b->ptr = b->end = b->ptr;
- code = -1;
- }
- }
- }
- return code;
-}
-
-IV
-PerlIOMmap_unmap(pTHX_ PerlIO *f)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- IV code = 0;
- if (m->len) {
- PerlIOBuf * const b = &m->base;
- if (b->buf) {
- code = munmap(m->mptr, m->len);
- b->buf = NULL;
- m->len = 0;
- m->mptr = NULL;
- if (PerlIO_seek(PerlIONext(f), b->posn, SEEK_SET) != 0)
- code = -1;
- }
- b->ptr = b->end = b->buf;
- PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF);
- }
- return code;
-}
-
-STDCHAR *
-PerlIOMmap_get_base(pTHX_ PerlIO *f)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- PerlIOBuf * const b = &m->base;
- if (b->buf && (PerlIOBase(f)->flags & PERLIO_F_RDBUF)) {
- /*
- * Already have a readbuffer in progress
- */
- return b->buf;
- }
- if (b->buf) {
- /*
- * We have a write buffer or flushed PerlIOBuf read buffer
- */
- m->bbuf = b->buf; /* save it in case we need it again */
- b->buf = NULL; /* Clear to trigger below */
- }
- if (!b->buf) {
- PerlIOMmap_map(aTHX_ f); /* Try and map it */
- if (!b->buf) {
- /*
- * Map did not work - recover PerlIOBuf buffer if we have one
- */
- b->buf = m->bbuf;
- }
- }
- b->ptr = b->end = b->buf;
- if (b->buf)
- return b->buf;
- return PerlIOBuf_get_base(aTHX_ f);
-}
-
-SSize_t
-PerlIOMmap_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- PerlIOBuf * const b = &m->base;
- if (PerlIOBase(f)->flags & PERLIO_F_WRBUF)
- PerlIO_flush(f);
- if (b->ptr && (b->ptr - count) >= b->buf
- && memEQ(b->ptr - count, vbuf, count)) {
- b->ptr -= count;
- PerlIOBase(f)->flags &= ~PERLIO_F_EOF;
- return count;
- }
- if (m->len) {
- /*
- * Loose the unwritable mapped buffer
- */
- PerlIO_flush(f);
- /*
- * If flush took the "buffer" see if we have one from before
- */
- if (!b->buf && m->bbuf)
- b->buf = m->bbuf;
- if (!b->buf) {
- PerlIOBuf_get_base(aTHX_ f);
- m->bbuf = b->buf;
- }
- }
- return PerlIOBuf_unread(aTHX_ f, vbuf, count);
-}
-
-SSize_t
-PerlIOMmap_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- PerlIOBuf * const b = &m->base;
-
- if (!b->buf || !(PerlIOBase(f)->flags & PERLIO_F_WRBUF)) {
- /*
- * No, or wrong sort of, buffer
- */
- if (m->len) {
- if (PerlIOMmap_unmap(aTHX_ f) != 0)
- return 0;
- }
- /*
- * If unmap took the "buffer" see if we have one from before
- */
- if (!b->buf && m->bbuf)
- b->buf = m->bbuf;
- if (!b->buf) {
- PerlIOBuf_get_base(aTHX_ f);
- m->bbuf = b->buf;
- }
- }
- return PerlIOBuf_write(aTHX_ f, vbuf, count);
-}
-
-IV
-PerlIOMmap_flush(pTHX_ PerlIO *f)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- PerlIOBuf * const b = &m->base;
- IV code = PerlIOBuf_flush(aTHX_ f);
- /*
- * Now we are "synced" at PerlIOBuf level
- */
- if (b->buf) {
- if (m->len) {
- /*
- * Unmap the buffer
- */
- if (PerlIOMmap_unmap(aTHX_ f) != 0)
- code = -1;
- }
- else {
- /*
- * We seem to have a PerlIOBuf buffer which was not mapped
- * remember it in case we need one later
- */
- m->bbuf = b->buf;
- }
- }
- return code;
-}
-
-IV
-PerlIOMmap_fill(pTHX_ PerlIO *f)
-{
- PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf);
- IV code = PerlIO_flush(f);
- if (code == 0 && !b->buf) {
- code = PerlIOMmap_map(aTHX_ f);
- }
- if (code == 0 && !(PerlIOBase(f)->flags & PERLIO_F_RDBUF)) {
- code = PerlIOBuf_fill(aTHX_ f);
- }
- return code;
-}
-
-IV
-PerlIOMmap_close(pTHX_ PerlIO *f)
-{
- PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
- PerlIOBuf * const b = &m->base;
- IV code = PerlIO_flush(f);
- if (m->bbuf) {
- b->buf = m->bbuf;
- m->bbuf = NULL;
- b->ptr = b->end = b->buf;
- }
- if (PerlIOBuf_close(aTHX_ f) != 0)
- code = -1;
- return code;
-}
-
-PerlIO *
-PerlIOMmap_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags)
-{
- return PerlIOBase_dup(aTHX_ f, o, param, flags);
-}
-
-
-PERLIO_FUNCS_DECL(PerlIO_mmap) = {
- sizeof(PerlIO_funcs),
- "mmap",
- sizeof(PerlIOMmap),
- PERLIO_K_BUFFERED|PERLIO_K_RAW,
- PerlIOBuf_pushed,
- PerlIOBuf_popped,
- PerlIOBuf_open,
- PerlIOBase_binmode, /* binmode */
- NULL,
- PerlIOBase_fileno,
- PerlIOMmap_dup,
- PerlIOBuf_read,
- PerlIOMmap_unread,
- PerlIOMmap_write,
- PerlIOBuf_seek,
- PerlIOBuf_tell,
- PerlIOBuf_close,
- PerlIOMmap_flush,
- PerlIOMmap_fill,
- PerlIOBase_eof,
- PerlIOBase_error,
- PerlIOBase_clearerr,
- PerlIOBase_setlinebuf,
- PerlIOMmap_get_base,
- PerlIOBuf_bufsiz,
- PerlIOBuf_get_ptr,
- PerlIOBuf_get_cnt,
- PerlIOBuf_set_ptrcnt,
-};
-
-#endif /* HAS_MMAP */
-
PerlIO *
Perl_PerlIO_stdin(pTHX)
{
- dVAR;
if (!PL_perlio) {
PerlIO_stdstreams(aTHX);
}
- return &PL_perlio[1];
+ return (PerlIO*)&PL_perlio[1];
}
PerlIO *
Perl_PerlIO_stdout(pTHX)
{
- dVAR;
if (!PL_perlio) {
PerlIO_stdstreams(aTHX);
}
- return &PL_perlio[2];
+ return (PerlIO*)&PL_perlio[2];
}
PerlIO *
Perl_PerlIO_stderr(pTHX)
{
- dVAR;
if (!PL_perlio) {
PerlIO_stdstreams(aTHX);
}
- return &PL_perlio[3];
+ return (PerlIO*)&PL_perlio[3];
}
/*--------------------------------------------------------------------------------------*/
char *
PerlIO_getname(PerlIO *f, char *buf)
{
- dTHX;
#ifdef VMS
+ dTHX;
char *name = NULL;
bool exported = FALSE;
FILE *stdio = PerlIOSelf(f, PerlIOStdio)->stdio;
#else
PERL_UNUSED_ARG(f);
PERL_UNUSED_ARG(buf);
- Perl_croak(aTHX_ "Don't know how to get file name");
+ Perl_croak_nocontext("Don't know how to get file name");
return NULL;
#endif
}
PerlIO_vprintf(PerlIO *f, const char *fmt, va_list ap)
{
dTHX;
- SV * const sv = newSVpvs("");
+ SV * sv;
const char *s;
STRLEN len;
SSize_t wrote;
#ifdef NEED_VA_COPY
va_list apc;
Perl_va_copy(ap, apc);
- sv_vcatpvf(sv, fmt, &apc);
+ sv = vnewSVpvf(fmt, &apc);
+ va_end(apc);
#else
- sv_vcatpvf(sv, fmt, &ap);
+ sv = vnewSVpvf(fmt, &ap);
#endif
s = SvPV_const(sv, len);
wrote = PerlIO_write(f, s, len);
PerlIO *
PerlIO_tmpfile(void)
{
+#ifndef WIN32
dTHX;
+#endif
PerlIO *f = NULL;
#ifdef WIN32
const int fd = win32_tmpfd();
f = PerlIO_fdopen(fd, "w+b");
#else /* WIN32 */
# if defined(HAS_MKSTEMP) && ! defined(VMS) && ! defined(OS2)
- SV * const sv = newSVpvs("/tmp/PerlIO_XXXXXX");
+ int fd = -1;
+ char tempname[] = "/tmp/PerlIO_XXXXXX";
+ const char * const tmpdir = TAINTING_get ? NULL : PerlEnv_getenv("TMPDIR");
+ SV * sv = NULL;
+ int old_umask = umask(0177);
/*
* I have no idea how portable mkstemp() is ... NI-S
*/
- const int fd = mkstemp(SvPVX(sv));
+ if (tmpdir && *tmpdir) {
+ /* if TMPDIR is set and not empty, we try that first */
+ sv = newSVpv(tmpdir, 0);
+ sv_catpv(sv, tempname + 4);
+ fd = mkstemp(SvPVX(sv));
+ }
+ if (fd < 0) {
+ SvREFCNT_dec(sv);
+ sv = NULL;
+ /* else we try /tmp */
+ fd = mkstemp(tempname);
+ }
+ if (fd < 0) {
+ /* Try cwd */
+ sv = newSVpvs(".");
+ sv_catpv(sv, tempname + 4);
+ fd = mkstemp(SvPVX(sv));
+ }
+ umask(old_umask);
if (fd >= 0) {
f = PerlIO_fdopen(fd, "w+");
if (f)
PerlIOBase(f)->flags |= PERLIO_F_TEMP;
- PerlLIO_unlink(SvPVX_const(sv));
- SvREFCNT_dec(sv);
+ PerlLIO_unlink(sv ? SvPVX_const(sv) : tempname);
}
+ SvREFCNT_dec(sv);
# else /* !HAS_MKSTEMP, fallback to stdio tmpfile(). */
FILE * const stdio = PerlSIO_tmpfile();
- if (stdio) {
- if ((f = PerlIO_push(aTHX_(PerlIO_allocate(aTHX)),
- PERLIO_FUNCS_CAST(&PerlIO_stdio),
- "w+", NULL))) {
- PerlIOStdio * const s = PerlIOSelf(f, PerlIOStdio);
+ if (stdio)
+ f = PerlIO_fdopen(fileno(stdio), "w+");
- if (s)
- s->stdio = stdio;
- }
- }
# endif /* else HAS_MKSTEMP */
#endif /* else WIN32 */
return f;
}
+void
+Perl_PerlIO_save_errno(pTHX_ PerlIO *f)
+{
+ if (!PerlIOValid(f))
+ return;
+ PerlIOBase(f)->err = errno;
+#ifdef VMS
+ PerlIOBase(f)->os_err = vaxc$errno;
+#elif defined(OS2)
+ PerlIOBase(f)->os_err = Perl_rc;
+#elif defined(WIN32)
+ PerlIOBase(f)->os_err = GetLastError();
+#endif
+}
+
+void
+Perl_PerlIO_restore_errno(pTHX_ PerlIO *f)
+{
+ if (!PerlIOValid(f))
+ return;
+ SETERRNO(PerlIOBase(f)->err, PerlIOBase(f)->os_err);
+#ifdef OS2
+ Perl_rc = PerlIOBase(f)->os_err);
+#elif defined(WIN32)
+ SetLastError(PerlIOBase(f)->os_err);
+#endif
+}
+
#undef HAS_FSETPOS
#undef HAS_FGETPOS
-#endif /* USE_SFIO */
-#endif /* PERLIO_IS_STDIO */
/*======================================================================================*/
/*
* Now some functions in terms of above which may be needed even if we are
* not in true PerlIO mode
*/
+const char *
+Perl_PerlIO_context_layers(pTHX_ const char *mode)
+{
+ const char *direction = NULL;
+ SV *layers;
+ /*
+ * Need to supply default layer info from open.pm
+ */
+
+ if (!PL_curcop)
+ return NULL;
+
+ if (mode && mode[0] != 'r') {
+ if (PL_curcop->cop_hints & HINT_LEXICAL_IO_OUT)
+ direction = "open>";
+ } else {
+ if (PL_curcop->cop_hints & HINT_LEXICAL_IO_IN)
+ direction = "open<";
+ }
+ if (!direction)
+ return NULL;
+
+ layers = cop_hints_fetch_pvn(PL_curcop, direction, 5, 0, 0);
+
+ assert(layers);
+ return SvOK(layers) ? SvPV_nolen_const(layers) : NULL;
+}
+
#ifndef HAS_FSETPOS
#undef PerlIO_setpos
int
PerlIO_setpos(PerlIO *f, SV *pos)
{
- dTHX;
if (SvOK(pos)) {
- STRLEN len;
- const Off_t * const posn = (Off_t *) SvPV(pos, len);
- if (f && len == sizeof(Off_t))
- return PerlIO_seek(f, *posn, SEEK_SET);
+ if (f) {
+ dTHX;
+ STRLEN len;
+ const Off_t * const posn = (Off_t *) SvPV(pos, len);
+ if(len == sizeof(Off_t))
+ return PerlIO_seek(f, *posn, SEEK_SET);
+ }
}
SETERRNO(EINVAL, SS_IVCHAN);
return -1;
int
PerlIO_setpos(PerlIO *f, SV *pos)
{
- dTHX;
if (SvOK(pos)) {
- STRLEN len;
- Fpos_t * const fpos = (Fpos_t *) SvPV(pos, len);
- if (f && len == sizeof(Fpos_t)) {
+ if (f) {
+ dTHX;
+ STRLEN len;
+ Fpos_t * const fpos = (Fpos_t *) SvPV(pos, len);
+ if(len == sizeof(Fpos_t))
#if defined(USE_64_BIT_STDIO) && defined(USE_FSETPOS64)
- return fsetpos64(f, fpos);
+ return fsetpos64(f, fpos);
#else
- return fsetpos(f, fpos);
+ return fsetpos(f, fpos);
#endif
}
}
}
#endif
-#if (defined(PERLIO_IS_STDIO) || !defined(USE_SFIO)) && !defined(HAS_VPRINTF)
+#if !defined(HAS_VPRINTF)
int
vprintf(char *pat, char *args)
#endif
-#ifndef PerlIO_vsprintf
-int
-PerlIO_vsprintf(char *s, int n, const char *fmt, va_list ap)
-{
- dVAR;
- const int val = vsprintf(s, fmt, ap);
- if (n >= 0) {
- if (strlen(s) >= (STRLEN) n) {
- dTHX;
- (void) PerlIO_puts(Perl_error_log,
- "panic: sprintf overflow - memory corrupted!\n");
- my_exit(1);
- }
- }
- return val;
-}
-#endif
+/* print a failure format string message to stderr and fail exit the process
+ using only libc without depending on any perl data structures being
+ initialized.
+*/
-#ifndef PerlIO_sprintf
-int
-PerlIO_sprintf(char *s, int n, const char *fmt, ...)
+void
+Perl_noperl_die(const char* pat, ...)
{
- va_list ap;
- int result;
- va_start(ap, fmt);
- result = PerlIO_vsprintf(s, n, fmt, ap);
- va_end(ap);
- return result;
+ va_list(arglist);
+ PERL_ARGS_ASSERT_NOPERL_DIE;
+ va_start(arglist, pat);
+ vfprintf(stderr, pat, arglist);
+ va_end(arglist);
+ exit(1);
}
-#endif
/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: t
- * End:
- *
- * ex: set ts=8 sts=4 sw=4 noet:
+ * ex: set ts=8 sts=4 sw=4 et:
*/
https://perl5.git.perl.org / perl5.git / blobdiff