| 1 | #! /bin/sh |
| 2 | case $PERL_CONFIG_SH in |
| 3 | '') |
| 4 | if test -f config.sh |
| 5 | then TOP=. |
| 6 | else |
| 7 | echo "Can't find config.sh."; exit 1 |
| 8 | fi |
| 9 | . $TOP/config.sh |
| 10 | ;; |
| 11 | esac |
| 12 | |
| 13 | # H.Merijn Brand [17 Feb 2004] |
| 14 | # This comment is just to ensure that Configure will find variables that |
| 15 | # are removed/replaced in patches on blead, but are still needed in the |
| 16 | # 5.8.x, 5.6.x and 5.005.x maintainance tracks. |
| 17 | # metaconfig -m will scan all .SH files on this level (not deeper), and |
| 18 | # not in x2p and other subfolders. This file is as good as any .SH |
| 19 | # patch references |
| 20 | # #22227 $baserev |
| 21 | # #22302 $yacc $byacc |
| 22 | |
| 23 | # H.Merijn Brand [30 Oct 2004] |
| 24 | # Mentioned for the same reason for future reference |
| 25 | # #23434 $d_strlcat $d_strlcpy |
| 26 | |
| 27 | : This forces SH files to create target in same directory as SH file. |
| 28 | : This is so that make depend always knows where to find SH derivatives. |
| 29 | case "$0" in |
| 30 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
| 31 | esac |
| 32 | |
| 33 | case "$d_dosuid" in |
| 34 | *define*) suidperl='suidperl' ;; |
| 35 | *) suidperl='';; |
| 36 | esac |
| 37 | |
| 38 | linklibperl='$(LIBPERL)' |
| 39 | shrpldflags='$(LDDLFLAGS)' |
| 40 | ldlibpth='' |
| 41 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' |
| 42 | case "$useshrplib" in |
| 43 | true) |
| 44 | # Prefix all runs of 'miniperl' and 'perl' with |
| 45 | # $ldlibpth so that ./perl finds *this* shared libperl. |
| 46 | case "$LD_LIBRARY_PATH" in |
| 47 | '') |
| 48 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; |
| 49 | *) |
| 50 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; |
| 51 | esac |
| 52 | |
| 53 | pldlflags="$cccdlflags" |
| 54 | static_target='static_pic' |
| 55 | case "${osname}${osvers}" in |
| 56 | next4*) |
| 57 | ld=libtool |
| 58 | lddlflags="-dynamic -undefined warning -framework System \ |
| 59 | -compatibility_version 1 -current_version $patchlevel \ |
| 60 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" |
| 61 | ;; |
| 62 | rhapsody*|darwin*) |
| 63 | shrpldflags="${ldflags} -dynamiclib \ |
| 64 | -compatibility_version \ |
| 65 | ${api_revision}.${api_version}.${api_subversion} \ |
| 66 | -current_version \ |
| 67 | ${revision}.${patchlevel}.${subversion} \ |
| 68 | -install_name \$(shrpdir)/\$@" |
| 69 | ;; |
| 70 | cygwin*) |
| 71 | linklibperl="-lperl" |
| 72 | ;; |
| 73 | sunos*) |
| 74 | linklibperl="-lperl" |
| 75 | ;; |
| 76 | netbsd*|freebsd[234]*|openbsd*|dragonfly*) |
| 77 | linklibperl="-L. -lperl" |
| 78 | ;; |
| 79 | interix*) |
| 80 | linklibperl="-L. -lperl" |
| 81 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" |
| 82 | ;; |
| 83 | aix*) |
| 84 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" |
| 85 | case "$osvers" in |
| 86 | 3*) shrpldflags="$shrpldflags -e _nostart" |
| 87 | ;; |
| 88 | *) shrpldflags="$shrpldflags -b noentry" |
| 89 | ;; |
| 90 | esac |
| 91 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" |
| 92 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" |
| 93 | ;; |
| 94 | hpux*) |
| 95 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" |
| 96 | ;; |
| 97 | os390*) |
| 98 | shrpldflags='-W l,XPLINK,dll' |
| 99 | linklibperl='libperl.x' |
| 100 | DPERL_EXTERNAL_GLOB='' |
| 101 | ;; |
| 102 | esac |
| 103 | case "$ldlibpthname" in |
| 104 | '') ;; |
| 105 | *) |
| 106 | case "$osname" in |
| 107 | os2) |
| 108 | ldlibpth='' |
| 109 | ;; |
| 110 | *) |
| 111 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" |
| 112 | ;; |
| 113 | esac |
| 114 | # Strip off any trailing :'s |
| 115 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` |
| 116 | ;; |
| 117 | esac |
| 118 | |
| 119 | case "$ldlibpth" in |
| 120 | # Protect any spaces |
| 121 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; |
| 122 | esac |
| 123 | |
| 124 | case "$osname" in |
| 125 | linux) |
| 126 | # If there is a pre-existing $libperl from a previous |
| 127 | # installation, Linux needs to use LD_PRELOAD to |
| 128 | # override the LD_LIBRARY_PATH setting. See the |
| 129 | # INSTALL file, under "Building a shared perl library". |
| 130 | # If there is no pre-existing $libperl, we don't need |
| 131 | # to do anything further. |
| 132 | if test -f $archlib/CORE/$libperl; then |
| 133 | rm -f preload |
| 134 | cat <<'EOT' > preload |
| 135 | #! /bin/sh |
| 136 | lib=$1 |
| 137 | shift |
| 138 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" |
| 139 | exec "$@" |
| 140 | EOT |
| 141 | chmod 755 preload |
| 142 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" |
| 143 | fi |
| 144 | ;; |
| 145 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" |
| 146 | ;; |
| 147 | esac |
| 148 | |
| 149 | ;; |
| 150 | |
| 151 | *) pldlflags='' |
| 152 | static_target='static' |
| 153 | ;; |
| 154 | esac |
| 155 | |
| 156 | : Prepare dependency lists for Makefile. |
| 157 | dynamic_list=' ' |
| 158 | extra_dep='' |
| 159 | case "$d_cplusplus" in |
| 160 | define) |
| 161 | : delete as a function name will not work. |
| 162 | dynamic_ext=`echo $dynamic_ext | sed 's/ODBM_File//'` |
| 163 | static_ext=`echo $static_ext | sed 's/ODBM_File//'` |
| 164 | ;; |
| 165 | esac |
| 166 | for f in $dynamic_ext; do |
| 167 | : the dependency named here will never exist |
| 168 | base=`echo "$f" | sed 's/.*\///'` |
| 169 | this_target="lib/auto/$f/$base.$dlext" |
| 170 | dynamic_list="$dynamic_list $this_target" |
| 171 | |
| 172 | : Parallel makes reveal that we have some interdependencies |
| 173 | case $f in |
| 174 | Math/BigInt/FastCalc) extra_dep="$extra_dep |
| 175 | $this_target: lib/auto/List/Util/Util.$dlext" ;; |
| 176 | Unicode/Normalize) extra_dep="$extra_dep |
| 177 | $this_target: uni.data" ;; |
| 178 | esac |
| 179 | done |
| 180 | |
| 181 | static_list=' ' |
| 182 | for f in $static_ext; do |
| 183 | base=`echo "$f" | sed 's/.*\///'` |
| 184 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" |
| 185 | done |
| 186 | |
| 187 | nonxs_list=' ' |
| 188 | for f in $nonxs_ext; do |
| 189 | base=`echo "$f" | sed 's/.*\///'` |
| 190 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" |
| 191 | done |
| 192 | |
| 193 | echo "Extracting Makefile (with variable substitutions)" |
| 194 | $spitshell >Makefile <<!GROK!THIS! |
| 195 | # Makefile.SH |
| 196 | # This file is derived from Makefile.SH. Any changes made here will |
| 197 | # be lost the next time you run Configure. |
| 198 | # Makefile is used to generate $firstmakefile. The only difference |
| 199 | # is that $firstmakefile has the dependencies filled in at the end. |
| 200 | |
| 201 | CC = $cc |
| 202 | LD = $ld |
| 203 | |
| 204 | LDFLAGS = $ldflags |
| 205 | CLDFLAGS = $ldflags |
| 206 | |
| 207 | mallocsrc = $mallocsrc |
| 208 | mallocobj = $mallocobj |
| 209 | madlysrc = $madlysrc |
| 210 | madlyobj = $madlyobj |
| 211 | LNS = $lns |
| 212 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? |
| 213 | CPS = $cp |
| 214 | RMS = rm -f |
| 215 | ranlib = $ranlib |
| 216 | |
| 217 | # The following are mentioned only to make metaconfig include the |
| 218 | # appropriate questions in Configure. If you want to change these, |
| 219 | # edit config.sh instead, or specify --man1dir=/wherever on |
| 220 | # installman commandline. |
| 221 | bin = $installbin |
| 222 | scriptdir = $scriptdir |
| 223 | shrpdir = $archlibexp/CORE |
| 224 | privlib = $installprivlib |
| 225 | man1dir = $man1dir |
| 226 | man1ext = $man1ext |
| 227 | man3dir = $man3dir |
| 228 | man3ext = $man3ext |
| 229 | |
| 230 | # The following are used to build and install shared libraries for |
| 231 | # dynamic loading. |
| 232 | LDDLFLAGS = $lddlflags |
| 233 | SHRPLDFLAGS = $shrpldflags |
| 234 | CCDLFLAGS = $ccdlflags |
| 235 | DLSUFFIX = .$dlext |
| 236 | PLDLFLAGS = $pldlflags |
| 237 | LIBPERL = $libperl |
| 238 | LLIBPERL= $linklibperl |
| 239 | SHRPENV = $shrpenv |
| 240 | |
| 241 | # Static targets are ordinarily built without CCCDLFLAGS. However, |
| 242 | # if building a shared libperl.so that might later be linked into |
| 243 | # another application, then it might be appropriate to also build static |
| 244 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC |
| 245 | # for GNU cc). This is handled by ext/util/make_ext. |
| 246 | STATIC = $static_target |
| 247 | |
| 248 | # The following is used to include the current directory in |
| 249 | # the dynamic loader path you are building a shared libperl. |
| 250 | LDLIBPTH = $ldlibpth |
| 251 | |
| 252 | dynamic_ext = $dynamic_list |
| 253 | static_ext = $static_list |
| 254 | nonxs_ext = $nonxs_list |
| 255 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) |
| 256 | DYNALOADER = DynaLoader\$(OBJ_EXT) |
| 257 | |
| 258 | libs = $perllibs $cryptlib |
| 259 | |
| 260 | public = perl\$(EXE_EXT) $suidperl utilities translators |
| 261 | |
| 262 | shellflags = $shellflags |
| 263 | |
| 264 | # This is set to MAKE=$make if your $make command doesn't |
| 265 | # do it for you. |
| 266 | $make_set_make |
| 267 | |
| 268 | # Mention $gmake here so it gets probed for by Configure. |
| 269 | |
| 270 | # These variables may need to be manually set for non-Unix systems. |
| 271 | AR = $full_ar |
| 272 | EXE_EXT = $_exe |
| 273 | LIB_EXT = $_a |
| 274 | OBJ_EXT = $_o |
| 275 | PATH_SEP = $p_ |
| 276 | |
| 277 | # If you're going to use valgrind and it can't be invoked as plain valgrind |
| 278 | # then you'll need to change this, or override it on the make command line. |
| 279 | VALGRIND=valgrind |
| 280 | |
| 281 | FIRSTMAKEFILE = $firstmakefile |
| 282 | |
| 283 | # Any special object files needed by this architecture, e.g. os2/os2.obj |
| 284 | ARCHOBJS = $archobjs |
| 285 | |
| 286 | .SUFFIXES: .c \$(OBJ_EXT) .i .s |
| 287 | |
| 288 | # grrr |
| 289 | SHELL = $sh |
| 290 | |
| 291 | # how to tr(anslate) newlines |
| 292 | TRNL = '$trnl' |
| 293 | |
| 294 | OPTIMIZE = $optimize |
| 295 | |
| 296 | EXTRAS = $extras |
| 297 | |
| 298 | INSTALLPREFIXEXP = $prefix |
| 299 | |
| 300 | !GROK!THIS! |
| 301 | # not used by Makefile but by installperl; |
| 302 | # mentioned here so that metaconfig picks these up |
| 303 | # $installusrbinperl |
| 304 | # $versiononly |
| 305 | |
| 306 | case "${osname}:${osvers}" in |
| 307 | darwin:*) |
| 308 | $spitshell >>Makefile <<EOF |
| 309 | |
| 310 | # Your locales are broken (osname $osname, osvers $osvers) |
| 311 | # and to avoid the numerous |
| 312 | # perl: warning: Setting locale failed. |
| 313 | # warnings during the build process we reset the locale variables. |
| 314 | |
| 315 | LC_ALL=C |
| 316 | LANG=C |
| 317 | LANGUAGE=C |
| 318 | EOF |
| 319 | ;; |
| 320 | esac |
| 321 | |
| 322 | ## In the following dollars and backticks do not need the extra backslash. |
| 323 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 324 | |
| 325 | CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@` |
| 326 | |
| 327 | CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<` |
| 328 | |
| 329 | CONFIGPM = lib/Config.pm lib/Config_heavy.pl |
| 330 | private = preplibrary $(CONFIGPM) lib/Config.pod lib/ExtUtils/Miniperl.pm |
| 331 | |
| 332 | # Files to be built with variable substitution before miniperl |
| 333 | # is available. |
| 334 | sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \ |
| 335 | makedir.SH myconfig.SH writemain.SH pod/Makefile.SH |
| 336 | |
| 337 | shextract = Makefile cflags config.h makeaperl makedepend \ |
| 338 | makedir myconfig writemain pod/Makefile |
| 339 | |
| 340 | # Files to be built with variable substitution after miniperl is |
| 341 | # available. Dependencies handled manually below (for now). |
| 342 | |
| 343 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ |
| 344 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL |
| 345 | |
| 346 | # lib/lib.pm is not listed here because it has a rule of its own. |
| 347 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ |
| 348 | pod/pod2usage pod/podchecker pod/podselect |
| 349 | |
| 350 | addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct |
| 351 | |
| 352 | # Unicode data files generated by mktables |
| 353 | unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \ |
| 354 | lib/unicore/Properties lib/unicore/Decomposition.pl \ |
| 355 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl |
| 356 | |
| 357 | # Directories of Unicode data files generated by mktables |
| 358 | unidatadirs = lib/unicore/To lib/unicore/lib |
| 359 | |
| 360 | h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h |
| 361 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h |
| 362 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h |
| 363 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h |
| 364 | h5 = utf8.h warnings.h |
| 365 | h = $(h1) $(h2) $(h3) $(h4) $(h5) |
| 366 | |
| 367 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c perl.c |
| 368 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c |
| 369 | c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c |
| 370 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c |
| 371 | c5 = $(madlysrc) $(mallocsrc) |
| 372 | |
| 373 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c |
| 374 | |
| 375 | obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) |
| 376 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
| 377 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) |
| 378 | |
| 379 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
| 380 | |
| 381 | lintflags = \ |
| 382 | -b \ |
| 383 | -n \ |
| 384 | -p \ |
| 385 | -Ncheck=%all \ |
| 386 | -Nlevel=4 \ |
| 387 | -errchk=parentheses \ |
| 388 | -errhdr=%all \ |
| 389 | -errfmt=src \ |
| 390 | -errtags \ |
| 391 | -erroff=E_ASSIGN_NARROW_CONV \ |
| 392 | -erroff=E_BAD_PTR_CAST \ |
| 393 | -erroff=E_BAD_PTR_CAST_ALIGN \ |
| 394 | -erroff=E_BAD_PTR_INT_COMBINATION \ |
| 395 | -erroff=E_BAD_SIGN_EXTEND \ |
| 396 | -erroff=E_BLOCK_DECL_UNUSED \ |
| 397 | -erroff=E_CASE_FALLTHRU \ |
| 398 | -erroff=E_CONST_EXPR \ |
| 399 | -erroff=E_CONSTANT_CONDITION \ |
| 400 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ |
| 401 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ |
| 402 | -erroff=E_EXPR_NULL_EFFECT \ |
| 403 | -erroff=E_FALSE_LOGICAL_EXPR \ |
| 404 | -erroff=E_INCL_NUSD \ |
| 405 | -erroff=E_LOOP_EMPTY \ |
| 406 | -erroff=E_MAIN_PARAM \ |
| 407 | -erroff=E_POINTER_TO_OBJECT \ |
| 408 | -erroff=E_PTRDIFF_OVERFLOW \ |
| 409 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ |
| 410 | -erroff=E_STATIC_UNUSED \ |
| 411 | -erroff=E_TRUE_LOGICAL_EXPR |
| 412 | |
| 413 | splintflags = \ |
| 414 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ |
| 415 | -D__builtin_va_list=va_list \ |
| 416 | -Dsigjmp_buf=jmp_buf \ |
| 417 | -warnposix \ |
| 418 | \ |
| 419 | +boolint \ |
| 420 | +charintliteral \ |
| 421 | -fixedformalarray \ |
| 422 | -mustfreefresh \ |
| 423 | -nestedextern \ |
| 424 | -predboolint \ |
| 425 | -predboolothers \ |
| 426 | -preproc \ |
| 427 | -boolops \ |
| 428 | -shadow \ |
| 429 | -nullstate \ |
| 430 | +longintegral \ |
| 431 | +matchanyintegral \ |
| 432 | -type \ |
| 433 | \ |
| 434 | +line-len 999 \ |
| 435 | +weak |
| 436 | |
| 437 | splintfiles = $(c1) |
| 438 | |
| 439 | .c$(OBJ_EXT): |
| 440 | $(CCCMD) $(PLDLFLAGS) $*.c |
| 441 | |
| 442 | .c.i: |
| 443 | $(CCCMDSRC) -E $*.c > $*.i |
| 444 | |
| 445 | .c.s: |
| 446 | $(CCCMDSRC) -S $*.c |
| 447 | |
| 448 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make |
| 449 | @echo " "; |
| 450 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." |
| 451 | |
| 452 | .PHONY: all translators utilities |
| 453 | |
| 454 | translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE |
| 455 | @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all |
| 456 | |
| 457 | utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE |
| 458 | @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all |
| 459 | |
| 460 | |
| 461 | # This is now done by installman only if you actually want the man pages. |
| 462 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; |
| 463 | |
| 464 | # Phony target to force checking subdirectories. |
| 465 | # Apparently some makes require an action for the FORCE target. |
| 466 | .PHONY: FORCE |
| 467 | FORCE: |
| 468 | @sh -c true |
| 469 | !NO!SUBS! |
| 470 | $spitshell >>Makefile <<!GROK!THIS! |
| 471 | |
| 472 | # We do a copy of the op.c instead of a symlink because gcc gets huffy |
| 473 | # if we have a symlink forest to another disk (it complains about too many |
| 474 | # levels of symbolic links, even if we have only two) |
| 475 | |
| 476 | opmini.c: op.c |
| 477 | \$(RMS) opmini.c |
| 478 | \$(CPS) op.c opmini.c |
| 479 | |
| 480 | opmini\$(OBJ_EXT): opmini.c |
| 481 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c |
| 482 | |
| 483 | !GROK!THIS! |
| 484 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 485 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h |
| 486 | $(CCCMD) $(PLDLFLAGS) $*.c |
| 487 | |
| 488 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) |
| 489 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c |
| 490 | |
| 491 | !NO!SUBS! |
| 492 | case "$osname" in |
| 493 | cygwin) |
| 494 | ;; # Let cygwin/Makefile.SHs do its work. |
| 495 | *) |
| 496 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 497 | perlmain$(OBJ_EXT): perlmain.c |
| 498 | $(CCCMD) $(PLDLFLAGS) $*.c |
| 499 | |
| 500 | !NO!SUBS! |
| 501 | ;; |
| 502 | esac |
| 503 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 504 | # The file ext.libs is a list of libraries that must be linked in |
| 505 | # for static extensions, e.g. -lm -lgdbm, etc. The individual |
| 506 | # static extension Makefile's add to it. |
| 507 | ext.libs: $(static_ext) |
| 508 | -@test -f ext.libs || touch ext.libs |
| 509 | |
| 510 | !NO!SUBS! |
| 511 | |
| 512 | # How to build libperl. This is still rather convoluted. |
| 513 | # Load up custom Makefile.SH fragment for shared loading and executables: |
| 514 | case "$osname" in |
| 515 | *) |
| 516 | Makefile_s="$osname/Makefile.SHs" |
| 517 | ;; |
| 518 | esac |
| 519 | |
| 520 | case "$osname" in |
| 521 | aix) |
| 522 | $spitshell >>Makefile <<!GROK!THIS! |
| 523 | LIBS = $perllibs |
| 524 | # In AIX we need to change this for building Perl itself from |
| 525 | # its earlier definition (which is for building external |
| 526 | # extensions *after* Perl has been built and installed) |
| 527 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` |
| 528 | |
| 529 | !GROK!THIS! |
| 530 | case "$useshrplib" in |
| 531 | define|true|[yY]*) |
| 532 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 533 | |
| 534 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) |
| 535 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) |
| 536 | |
| 537 | $(LIBPERL_NONSHR): $(obj) |
| 538 | $(RMS) $(LIBPERL_NONSHR) |
| 539 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) |
| 540 | |
| 541 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) |
| 542 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ |
| 543 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) |
| 544 | |
| 545 | MINIPERLEXP = $(MINIPERL_NONSHR) |
| 546 | |
| 547 | LIBPERLEXPORT = perl.exp |
| 548 | |
| 549 | !NO!SUBS! |
| 550 | |
| 551 | ;; |
| 552 | *) |
| 553 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 554 | MINIPERLEXP = miniperl$(EXE_EXT) |
| 555 | |
| 556 | PERLEXPORT = perl.exp |
| 557 | |
| 558 | !NO!SUBS! |
| 559 | ;; |
| 560 | esac |
| 561 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 562 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) |
| 563 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp |
| 564 | |
| 565 | !NO!SUBS! |
| 566 | ;; |
| 567 | os2) |
| 568 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 569 | MINIPERLEXP = miniperl |
| 570 | |
| 571 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map |
| 572 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def |
| 573 | |
| 574 | !NO!SUBS! |
| 575 | ;; |
| 576 | esac |
| 577 | |
| 578 | if test -r $Makefile_s ; then |
| 579 | . $Makefile_s |
| 580 | $spitshell >>Makefile <<!GROK!THIS! |
| 581 | |
| 582 | Makefile: $Makefile_s |
| 583 | !GROK!THIS! |
| 584 | else |
| 585 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 586 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) |
| 587 | !NO!SUBS! |
| 588 | case "$useshrplib" in |
| 589 | true) |
| 590 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 591 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) |
| 592 | !NO!SUBS! |
| 593 | case "$osname" in |
| 594 | aix) |
| 595 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 596 | rm -f libperl$(OBJ_EXT) |
| 597 | mv $@ libperl$(OBJ_EXT) |
| 598 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) |
| 599 | !NO!SUBS! |
| 600 | ;; |
| 601 | esac |
| 602 | ;; |
| 603 | *) |
| 604 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 605 | rm -f $(LIBPERL) |
| 606 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) |
| 607 | @$(ranlib) $(LIBPERL) |
| 608 | !NO!SUBS! |
| 609 | ;; |
| 610 | esac |
| 611 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 612 | |
| 613 | # How to build executables. |
| 614 | |
| 615 | # The $& notation tells Sequent machines that it can do a parallel make, |
| 616 | # and is harmless otherwise. |
| 617 | # The miniperl -w -MExporter line is a basic cheap test to catch errors |
| 618 | # before make goes on to run preplibrary and then MakeMaker on extensions. |
| 619 | # This is very handy because later errors are often caused by miniperl |
| 620 | # build problems but that's not obvious to the novice. |
| 621 | # The Module used here must not depend on Config or any extensions. |
| 622 | |
| 623 | !NO!SUBS! |
| 624 | |
| 625 | case "${osname}${osvers}" in |
| 626 | aix*|beos*) |
| 627 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 628 | miniperl: $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT) |
| 629 | $(CC) -o miniperl $(CLDFLAGS) \ |
| 630 | `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
| 631 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs) |
| 632 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| 633 | !NO!SUBS! |
| 634 | ;; |
| 635 | next4*) |
| 636 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 637 | miniperl: $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT) |
| 638 | $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
| 639 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs) |
| 640 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| 641 | !NO!SUBS! |
| 642 | ;; |
| 643 | darwin*) |
| 644 | case "$osvers" in |
| 645 | [1-6].*) ;; |
| 646 | *) case "$ldflags" in |
| 647 | *"-flat_namespace"*) ;; |
| 648 | *) # to allow opmini.o to override stuff in libperl.dylib |
| 649 | $spitshell >>Makefile <<!NO!SUBS! |
| 650 | NAMESPACEFLAGS = -force_flat_namespace |
| 651 | !NO!SUBS! |
| 652 | ;; |
| 653 | esac |
| 654 | ;; |
| 655 | esac |
| 656 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 657 | miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT) |
| 658 | -@rm -f miniperl.xok |
| 659 | $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \ |
| 660 | `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
| 661 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs) |
| 662 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| 663 | !NO!SUBS! |
| 664 | ;; |
| 665 | *) |
| 666 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 667 | miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT) |
| 668 | -@rm -f miniperl.xok |
| 669 | $(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \ |
| 670 | `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
| 671 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs) |
| 672 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| 673 | !NO!SUBS! |
| 674 | ;; |
| 675 | esac |
| 676 | |
| 677 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 678 | |
| 679 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| 680 | -@rm -f miniperl.xok |
| 681 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| 682 | |
| 683 | # Purify/Quantify Perls. |
| 684 | |
| 685 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| 686 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| 687 | |
| 688 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| 689 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| 690 | |
| 691 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| 692 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| 693 | |
| 694 | # Valgrind perl (currently Linux only) |
| 695 | |
| 696 | perl.valgrind.config: config.sh |
| 697 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
| 698 | @$(MAKE) perl.config.dashg |
| 699 | @echo "Checking usemymalloc='n' in config.sh..." |
| 700 | @grep "^usemymalloc=" config.sh |
| 701 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
| 702 | @echo "And of course you have to have valgrind..." |
| 703 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 |
| 704 | |
| 705 | # Third Degree Perl (Tru64 only) |
| 706 | |
| 707 | perl.config.dashg: |
| 708 | @echo "Checking optimize='-g' in config.sh..." |
| 709 | @grep "^optimize=" config.sh |
| 710 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 |
| 711 | |
| 712 | perl.third.config: config.sh |
| 713 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
| 714 | @$(MAKE) perl.config.dashg |
| 715 | @echo "Checking usemymalloc='n' in config.sh..." |
| 716 | @grep "^usemymalloc=" config.sh |
| 717 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
| 718 | |
| 719 | perl.third: /usr/bin/atom perl.third.config perl |
| 720 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl |
| 721 | @echo "Now you may run perl.third and then study perl.3log." |
| 722 | |
| 723 | # Pixie Perls (Tru64 and IRIX only) |
| 724 | |
| 725 | perl.pixie.config: config.sh |
| 726 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." |
| 727 | @$(MAKE) perl.config.dashg |
| 728 | |
| 729 | perl.pixie.atom: /usr/bin/atom perl |
| 730 | atom -tool pixie -L. -all -toolargs="-quiet" perl |
| 731 | |
| 732 | perl.pixie.irix: perl |
| 733 | pixie perl |
| 734 | |
| 735 | perl.pixie: /usr/bin/pixie perl.pixie.config perl |
| 736 | if test -x /usr/bin/atom; then \ |
| 737 | $(MAKE) perl.pixie.atom; \ |
| 738 | else \ |
| 739 | $(MAKE) perl.pixie.irix; \ |
| 740 | fi |
| 741 | @echo "Now you may run perl.pixie and then run pixie." |
| 742 | |
| 743 | # Gprof Perl |
| 744 | |
| 745 | perl.config.dashpg: |
| 746 | @echo "Checking optimize='-pg' in config.sh..." |
| 747 | @grep "^optimize=" config.sh |
| 748 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 |
| 749 | |
| 750 | perl.gprof.config: config.sh |
| 751 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." |
| 752 | @$(MAKE) perl.config.dashpg |
| 753 | |
| 754 | perl.gprof: /usr/bin/gprof perl.gprof.config |
| 755 | @-rm -f perl |
| 756 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl |
| 757 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." |
| 758 | |
| 759 | # Gcov Perl |
| 760 | |
| 761 | perl.config.gcov: |
| 762 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." |
| 763 | @echo "Checking gccversion in config.sh..." |
| 764 | @grep "^gccversion=" config.sh |
| 765 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 |
| 766 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." |
| 767 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." |
| 768 | @grep "^ccflags=" config.sh |
| 769 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 |
| 770 | |
| 771 | perl.gcov: perl.config.gcov |
| 772 | @-rm -f perl |
| 773 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl |
| 774 | @echo "Now you may run perl.gcov and then run gcov some.c." |
| 775 | |
| 776 | # Microperl. This is just a convenience thing if one happens to |
| 777 | # build also the full Perl and therefore the real big Makefile: |
| 778 | # usually one should manually explicitly issue the below command. |
| 779 | |
| 780 | .PHONY: microperl |
| 781 | microperl: |
| 782 | $(MAKE) -f Makefile.micro |
| 783 | |
| 784 | # This version, if specified in Configure, does ONLY those scripts which need |
| 785 | # set-id emulation. Suidperl must be setuid root. It contains the "taint" |
| 786 | # checks as well as the special code to validate that the script in question |
| 787 | # has been invoked correctly. |
| 788 | |
| 789 | suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| 790 | $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| 791 | |
| 792 | !NO!SUBS! |
| 793 | |
| 794 | fi |
| 795 | |
| 796 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 797 | |
| 798 | sperl$(OBJ_EXT): perl.c $(h) |
| 799 | $(RMS) sperl.c |
| 800 | $(LNS) perl.c sperl.c |
| 801 | $(CCCMD) -DIAMSUID sperl.c |
| 802 | $(RMS) sperl.c |
| 803 | |
| 804 | # We have to call our ./makedir because Ultrix 4.3 make can't handle the line |
| 805 | # test -d lib/auto || mkdir lib/auto |
| 806 | # We need to autosplit in two steps because VOS can't handle so many args |
| 807 | # |
| 808 | .PHONY: preplibrary |
| 809 | preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) |
| 810 | @sh ./makedir lib/auto |
| 811 | @echo " AutoSplitting perl library" |
| 812 | $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \ |
| 813 | autosplit_lib_modules(@ARGV)' lib/*.pm |
| 814 | $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \ |
| 815 | autosplit_lib_modules(@ARGV)' lib/*/*.pm |
| 816 | $(MAKE) lib/re.pm |
| 817 | |
| 818 | .PHONY: makeppport |
| 819 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) |
| 820 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport |
| 821 | |
| 822 | lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary |
| 823 | $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm |
| 824 | |
| 825 | $(CONFIGPM): lib/Config.pod |
| 826 | |
| 827 | lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM) |
| 828 | $(LDLIBPTH) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm |
| 829 | |
| 830 | lib/re.pm: ext/re/re.pm |
| 831 | @-rm -f $@ |
| 832 | cp ext/re/re.pm lib/re.pm |
| 833 | |
| 834 | $(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p |
| 835 | @-rm -f $@ |
| 836 | $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL |
| 837 | |
| 838 | x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL |
| 839 | cd x2p; $(LDLIBPTH) $(MAKE) s2p |
| 840 | |
| 841 | lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM) |
| 842 | @-rm -f $@ |
| 843 | $(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL |
| 844 | |
| 845 | unidatafiles $(unidatafiles): uni.data |
| 846 | |
| 847 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables |
| 848 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w |
| 849 | touch uni.data |
| 850 | |
| 851 | extra.pods: miniperl$(EXE_EXT) |
| 852 | -@test ! -f extra.pods || rm -f `cat extra.pods` |
| 853 | -@rm -f extra.pods |
| 854 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ |
| 855 | nx=`echo $$x | sed -e "s/README\.//"`; \ |
| 856 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ |
| 857 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ |
| 858 | done |
| 859 | -@rm -f pod/perlvms.pod |
| 860 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods |
| 861 | -@rm -f pod/perldelta.pod |
| 862 | -@test -f pod/perl595delta.pod && cd pod && $(LNS) perl595delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc |
| 863 | |
| 864 | extras.make: perl$(EXE_EXT) |
| 865 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` |
| 866 | |
| 867 | extras.test: perl$(EXE_EXT) |
| 868 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` |
| 869 | |
| 870 | extras.install: perl$(EXE_EXT) |
| 871 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` |
| 872 | |
| 873 | .PHONY: install install-strip install-all install-verbose install-silent \ |
| 874 | no-install install.perl install.man install.html |
| 875 | |
| 876 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm |
| 877 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta |
| 878 | |
| 879 | install-strip: |
| 880 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" |
| 881 | |
| 882 | install install-all: |
| 883 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" |
| 884 | |
| 885 | install-verbose: |
| 886 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" |
| 887 | |
| 888 | install-silent: |
| 889 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" |
| 890 | |
| 891 | no-install: |
| 892 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" |
| 893 | |
| 894 | # Set this to an empty string to avoid an attempt of rebuild before install |
| 895 | INSTALL_DEPENDENCE = all |
| 896 | |
| 897 | install.perl: $(INSTALL_DEPENDENCE) installperl |
| 898 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) |
| 899 | $(MAKE) extras.install |
| 900 | |
| 901 | install.man: all installman |
| 902 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) |
| 903 | |
| 904 | # XXX Experimental. Hardwired values, but useful for testing. |
| 905 | # Eventually Configure could ask for some of these values. |
| 906 | install.html: all installhtml |
| 907 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. |
| 908 | $(LDLIBPTH) ./perl installhtml \ |
| 909 | --podroot=. --podpath=. --recurse \ |
| 910 | --htmldir=$(privlib)/html \ |
| 911 | --htmlroot=$(privlib)/html \ |
| 912 | --splithead=pod/perlipc \ |
| 913 | --splititem=pod/perlfunc \ |
| 914 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ |
| 915 | --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \ |
| 916 | --verbose |
| 917 | |
| 918 | |
| 919 | # I now supply perly.c with the kits, so the following section is |
| 920 | # used only if you force bison to run by saying |
| 921 | # make regen_perly |
| 922 | # You normally shouldn't remake perly.[ch]. |
| 923 | |
| 924 | .PHONY: regen_perly |
| 925 | |
| 926 | run_byacc: |
| 927 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" |
| 928 | |
| 929 | # this outputs perly.h, perly.act and perly.tab |
| 930 | regen_perly: |
| 931 | perl regen_perly.pl |
| 932 | |
| 933 | # We don't want to regenerate perly.c and perly.h, but they might |
| 934 | # appear out-of-date after a patch is applied or a new distribution is |
| 935 | # made. |
| 936 | perly.c: perly.y |
| 937 | -@sh -c true |
| 938 | |
| 939 | perly.h: perly.y |
| 940 | -@sh -c true |
| 941 | |
| 942 | # No compat3.sym here since and including the 5.004_50. |
| 943 | # No interp.sym since 5.005_03. |
| 944 | SYM = global.sym globvar.sym perlio.sym pp.sym |
| 945 | |
| 946 | SYMH = perlvars.h intrpvar.h thrdvar.h |
| 947 | |
| 948 | CHMOD_W = chmod +w |
| 949 | |
| 950 | # The following files are generated automatically |
| 951 | # autodoc.pl: pod/perlapi.pod pod/perlintern.pod |
| 952 | # embed.pl: proto.h embed.h embedvar.h global.sym |
| 953 | # perlapi.h perlapi.c |
| 954 | # [* embed.pl needs pp.sym generated by opcode.pl! *] |
| 955 | # keywords.pl: keywords.h |
| 956 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym |
| 957 | # regcomp.pl: regnodes.h |
| 958 | # warnings.pl: warnings.h lib/warnings.pm |
| 959 | # The correct versions should be already supplied with the perl kit, |
| 960 | # in case you don't have perl available. |
| 961 | # To force them to be regenerated, run |
| 962 | # perl regen.pl |
| 963 | # with your existing copy of perl |
| 964 | # (make regen_headers is kept for backwards compatibility) |
| 965 | |
| 966 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ |
| 967 | embed.h embedvar.h global.sym \ |
| 968 | pod/perlintern.pod pod/perlapi.pod \ |
| 969 | perlapi.h perlapi.c regnodes.h \ |
| 970 | warnings.h lib/warnings.pm |
| 971 | |
| 972 | .PHONY: regen_headers regen_pods regen_all |
| 973 | |
| 974 | regen regen_headers: FORCE |
| 975 | -perl regen.pl |
| 976 | |
| 977 | regen_pods: FORCE |
| 978 | -cd pod; $(LDLIBPTH) $(MAKE) regen_pods |
| 979 | |
| 980 | regen_all: regen regen_pods |
| 981 | |
| 982 | .PHONY: manisort manicheck |
| 983 | |
| 984 | manisort: FORCE |
| 985 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ |
| 986 | LC_ALL=C sort -fdo MANIFEST MANIFEST) |
| 987 | |
| 988 | manicheck: FORCE |
| 989 | perl Porting/manicheck |
| 990 | |
| 991 | # Extensions: |
| 992 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will |
| 993 | # automatically get built. There should ordinarily be no need to change |
| 994 | # any of this part of makefile. |
| 995 | # |
| 996 | # The dummy dependency is a place holder in case $(dynamic_ext) or |
| 997 | # $(static_ext) is empty. |
| 998 | # |
| 999 | # DynaLoader may be needed for extensions that use Makefile.PL. |
| 1000 | |
| 1001 | $(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE |
| 1002 | @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| 1003 | |
| 1004 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE |
| 1005 | @$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| 1006 | |
| 1007 | s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE |
| 1008 | @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| 1009 | |
| 1010 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE |
| 1011 | @$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| 1012 | !NO!SUBS! |
| 1013 | |
| 1014 | $spitshell >>Makefile <<EOF |
| 1015 | $extra_dep |
| 1016 | EOF |
| 1017 | |
| 1018 | $spitshell >>Makefile <<'!NO!SUBS!' |
| 1019 | |
| 1020 | .PHONY: printconfig |
| 1021 | printconfig: |
| 1022 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) |
| 1023 | |
| 1024 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ |
| 1025 | realclean _realcleaner clobber _clobber \ |
| 1026 | distclean veryclean _verycleaner \ |
| 1027 | cleanup_unpacked_files unpack_files |
| 1028 | |
| 1029 | clean: cleanup_unpacked_files _tidy _mopup |
| 1030 | |
| 1031 | realclean: cleanup_unpacked_files _realcleaner _mopup |
| 1032 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" |
| 1033 | |
| 1034 | _clobber: |
| 1035 | -@rm -f Cross/run-* Cross/to-* Cross/from-* |
| 1036 | rm -f config.sh cppstdin Policy.sh extras.lst |
| 1037 | |
| 1038 | clobber: cleanup_unpacked_files _realcleaner _mopup _clobber |
| 1039 | |
| 1040 | distclean: clobber |
| 1041 | |
| 1042 | # Like distclean but also removes emacs backups and *.orig. |
| 1043 | veryclean: _verycleaner _mopup _clobber |
| 1044 | -@rm -f Obsolete Wanted |
| 1045 | |
| 1046 | # Do not 'make _mopup' directly. |
| 1047 | _mopup: |
| 1048 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c |
| 1049 | -rmdir .depending |
| 1050 | -@test -f extra.pods && rm -f `cat extra.pods` |
| 1051 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod |
| 1052 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o |
| 1053 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def |
| 1054 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap |
| 1055 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log |
| 1056 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs |
| 1057 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok |
| 1058 | -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
| 1059 | -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl |
| 1060 | -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old |
| 1061 | -rm -f config.over |
| 1062 | |
| 1063 | # Do not 'make _tidy' directly. |
| 1064 | _tidy: |
| 1065 | -cd pod; $(LDLIBPTH) $(MAKE) clean |
| 1066 | -cd utils; $(LDLIBPTH) $(MAKE) clean |
| 1067 | -cd x2p; $(LDLIBPTH) $(MAKE) clean |
| 1068 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
| 1069 | $(LDLIBPTH) sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \ |
| 1070 | done |
| 1071 | |
| 1072 | _cleaner1: |
| 1073 | -cd os2; rm -f Makefile |
| 1074 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| 1075 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| 1076 | -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| 1077 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
| 1078 | $(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \ |
| 1079 | done |
| 1080 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean |
| 1081 | |
| 1082 | # Some systems do not support "?", so keep these files separate. |
| 1083 | _cleaner2: |
| 1084 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c |
| 1085 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* |
| 1086 | rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests |
| 1087 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) |
| 1088 | rm -rf $(addedbyconf) |
| 1089 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old |
| 1090 | rm -f $(private) |
| 1091 | rm -rf $(unidatafiles) $(unidatadirs) |
| 1092 | rm -rf lib/auto |
| 1093 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists |
| 1094 | rm -f h2ph.man pstruct |
| 1095 | rm -rf .config |
| 1096 | rm -f preload |
| 1097 | rm -rf lib/Encode lib/Compress lib/Hash lib/re |
| 1098 | rm -rf lib/IO/Compress lib/IO/Uncompress |
| 1099 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c |
| 1100 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) |
| 1101 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) |
| 1102 | -rmdir lib/B lib/Data |
| 1103 | -rmdir lib/Filter/Util lib/IO/Socket |
| 1104 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys |
| 1105 | -rmdir lib/threads lib/XS |
| 1106 | |
| 1107 | _realcleaner: |
| 1108 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean |
| 1109 | @$(LDLIBPTH) $(MAKE) _cleaner2 |
| 1110 | |
| 1111 | _verycleaner: |
| 1112 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean |
| 1113 | @$(LDLIBPTH) $(MAKE) _cleaner2 |
| 1114 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig |
| 1115 | |
| 1116 | .PHONY: lint |
| 1117 | lint: $(c) |
| 1118 | rm -f *.ln |
| 1119 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) |
| 1120 | |
| 1121 | .PHONY: splint |
| 1122 | splint: $(c) |
| 1123 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) |
| 1124 | |
| 1125 | # Need to unset during recursion to go out of loop. |
| 1126 | # The README below ensures that the dependency list is never empty and |
| 1127 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. |
| 1128 | |
| 1129 | MAKEDEPEND = Makefile makedepend |
| 1130 | |
| 1131 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) |
| 1132 | $(MAKE) depend MAKEDEPEND= |
| 1133 | |
| 1134 | config.h: config_h.SH config.sh |
| 1135 | $(SHELL) config_h.SH |
| 1136 | |
| 1137 | # When done, touch perlmain.c so that it doesn't get remade each time. |
| 1138 | .PHONY: depend |
| 1139 | depend: makedepend |
| 1140 | sh ./makedepend MAKE=$(MAKE) |
| 1141 | - test -s perlmain.c && touch perlmain.c |
| 1142 | cd x2p; $(MAKE) depend |
| 1143 | |
| 1144 | # Cannot postpone this until $firstmakefile is ready ;-) |
| 1145 | makedepend: makedepend.SH config.sh |
| 1146 | sh ./makedepend.SH |
| 1147 | |
| 1148 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ |
| 1149 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ |
| 1150 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ |
| 1151 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ |
| 1152 | test.third check.third utest.third ucheck.third test_notty.third \ |
| 1153 | test.deparse test_notty.deparse test_harness test_harness_notty \ |
| 1154 | minitest coretest test.taintwarn |
| 1155 | |
| 1156 | # Cannot delegate rebuilding of t/perl to make |
| 1157 | # to allow interlaced test and minitest |
| 1158 | |
| 1159 | TESTFILE=TEST |
| 1160 | |
| 1161 | _test_prep: unpack_files |
| 1162 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) |
| 1163 | |
| 1164 | # Architecture-neutral stuff: |
| 1165 | |
| 1166 | test_prep_pre: preplibrary utilities $(nonxs_ext) |
| 1167 | |
| 1168 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) |
| 1169 | PERL=./perl $(MAKE) _test_prep |
| 1170 | |
| 1171 | _test_tty: |
| 1172 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty |
| 1173 | |
| 1174 | _test_notty: |
| 1175 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) |
| 1176 | |
| 1177 | unpack_files: |
| 1178 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m |
| 1179 | |
| 1180 | cleanup_unpacked_files: |
| 1181 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c |
| 1182 | |
| 1183 | # The second branch is for testing without a tty or controlling terminal, |
| 1184 | # see t/op/stat.t |
| 1185 | _test: |
| 1186 | if (true </dev/tty) >/dev/null 2>&1; then \ |
| 1187 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ |
| 1188 | else \ |
| 1189 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ |
| 1190 | fi |
| 1191 | @echo "Ran tests" > t/rantests |
| 1192 | |
| 1193 | test check: test_prep |
| 1194 | PERL=./perl $(MAKE) _test |
| 1195 | |
| 1196 | test_tty: test_prep |
| 1197 | PERL=./perl $(MAKE) _test_tty |
| 1198 | |
| 1199 | test_notty: test_prep |
| 1200 | PERL=./perl $(MAKE) _test_notty |
| 1201 | |
| 1202 | utest ucheck test.utf8 check.utf8: test_prep |
| 1203 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test |
| 1204 | |
| 1205 | coretest: test_prep |
| 1206 | PERL=./perl TEST_ARGS=-core $(MAKE) _test |
| 1207 | |
| 1208 | test-prep: test_prep |
| 1209 | |
| 1210 | test-tty: test_tty |
| 1211 | |
| 1212 | test-notty: test_notty |
| 1213 | |
| 1214 | # Torture testing |
| 1215 | |
| 1216 | test.torture torturetest: test_prep |
| 1217 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test |
| 1218 | |
| 1219 | # Targets for UTF16 testing: |
| 1220 | |
| 1221 | minitest.utf16: minitest.prep |
| 1222 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
| 1223 | && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
| 1224 | |
| 1225 | test.utf16 check.utf16: test_prep |
| 1226 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test |
| 1227 | |
| 1228 | utest.utf16 ucheck.utf16: test_prep |
| 1229 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test |
| 1230 | |
| 1231 | # Targets for valgrind testing: |
| 1232 | |
| 1233 | test_prep.valgrind: test_prep perl.valgrind |
| 1234 | PERL=./perl $(MAKE) _test_prep |
| 1235 | |
| 1236 | test.valgrind check.valgrind: test_prep perl.valgrind.config |
| 1237 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test |
| 1238 | |
| 1239 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config |
| 1240 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test |
| 1241 | |
| 1242 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config |
| 1243 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty |
| 1244 | |
| 1245 | # Targets for Third Degree testing. |
| 1246 | |
| 1247 | test_prep.third: test_prep perl.third |
| 1248 | PERL=./perl.third $(MAKE) _test_prep |
| 1249 | |
| 1250 | test.third check.third: test_prep.third perl.third |
| 1251 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test |
| 1252 | |
| 1253 | utest.third ucheck.third: test_prep.third perl.third |
| 1254 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test |
| 1255 | |
| 1256 | test_notty.third: test_prep.third perl.third |
| 1257 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty |
| 1258 | |
| 1259 | # Targets for Deparse testing. |
| 1260 | |
| 1261 | test.deparse: test_prep |
| 1262 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test |
| 1263 | |
| 1264 | test_notty.deparse: test_prep |
| 1265 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty |
| 1266 | |
| 1267 | # Targets to run the test suite with -t |
| 1268 | |
| 1269 | test.taintwarn: test_prep |
| 1270 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test |
| 1271 | |
| 1272 | minitest.prep: |
| 1273 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ |
| 1274 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) |
| 1275 | @echo " " |
| 1276 | @echo "You may see some irrelevant test failures if you have been unable" |
| 1277 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." |
| 1278 | @echo " " |
| 1279 | |
| 1280 | # Can't depend on lib/Config.pm because that might be where miniperl |
| 1281 | # is crashing. |
| 1282 | minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep |
| 1283 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
| 1284 | && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
| 1285 | |
| 1286 | # Test via harness |
| 1287 | |
| 1288 | test_harness: test_prep |
| 1289 | PERL=./perl $(MAKE) TESTFILE=harness _test |
| 1290 | |
| 1291 | test_harness_notty: test_prep |
| 1292 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test |
| 1293 | |
| 1294 | # Handy way to run perlbug -ok without having to install and run the |
| 1295 | # installed perlbug. We don't re-run the tests here - we trust the user. |
| 1296 | # Please *don't* use this unless all tests pass. |
| 1297 | # If you want to report test failures, use "make nok" instead. |
| 1298 | |
| 1299 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack |
| 1300 | |
| 1301 | ok: utilities |
| 1302 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' |
| 1303 | |
| 1304 | okfile: utilities |
| 1305 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok |
| 1306 | |
| 1307 | oknack: utilities |
| 1308 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A |
| 1309 | |
| 1310 | okfilenack: utilities |
| 1311 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A |
| 1312 | |
| 1313 | nok: utilities |
| 1314 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' |
| 1315 | |
| 1316 | nokfile: utilities |
| 1317 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok |
| 1318 | |
| 1319 | noknack: utilities |
| 1320 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A |
| 1321 | |
| 1322 | nokfilenack: utilities |
| 1323 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A |
| 1324 | |
| 1325 | .PHONY: clist hlist shlist pllist |
| 1326 | |
| 1327 | clist: $(c) |
| 1328 | echo $(c) | tr ' ' $(TRNL) >.clist |
| 1329 | |
| 1330 | hlist: $(h) |
| 1331 | echo $(h) | tr ' ' $(TRNL) >.hlist |
| 1332 | |
| 1333 | shlist: $(sh) |
| 1334 | echo $(sh) | tr ' ' $(TRNL) >.shlist |
| 1335 | |
| 1336 | pllist: $(pl) |
| 1337 | echo $(pl) | tr ' ' $(TRNL) >.pllist |
| 1338 | |
| 1339 | Makefile: Makefile.SH ./config.sh |
| 1340 | $(SHELL) Makefile.SH |
| 1341 | |
| 1342 | .PHONY: distcheck |
| 1343 | distcheck: FORCE |
| 1344 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' |
| 1345 | |
| 1346 | .PHONY: elc |
| 1347 | elc: emacs/cperl-mode.elc |
| 1348 | |
| 1349 | emacs/cperl-mode.elc: emacs/cperl-mode.el |
| 1350 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el |
| 1351 | |
| 1352 | .PHONY: etags ctags tags |
| 1353 | |
| 1354 | etags: TAGS |
| 1355 | |
| 1356 | TAGS: emacs/cperl-mode.elc |
| 1357 | sh emacs/ptags |
| 1358 | |
| 1359 | # Let's hope make will not go into an infinite loop on case-unsensitive systems |
| 1360 | # This may also fail if . is in the head of the path, since perl will |
| 1361 | # require -Ilib |
| 1362 | tags: TAGS |
| 1363 | perl emacs/e2ctags.pl TAGS > tags |
| 1364 | |
| 1365 | ctags: |
| 1366 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h |
| 1367 | |
| 1368 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE |
| 1369 | # If this runs make out of memory, delete /usr/include lines. |
| 1370 | !NO!SUBS! |
| 1371 | |
| 1372 | $eunicefix Makefile |
| 1373 | case `pwd` in |
| 1374 | *SH) |
| 1375 | $rm -f ../Makefile |
| 1376 | $ln Makefile ../Makefile |
| 1377 | ;; |
| 1378 | esac |
| 1379 | $rm -f $firstmakefile |
| 1380 | |
| 1381 | # Now do any special processing required before building. |
| 1382 | |
| 1383 | case "$ebcdic" in |
| 1384 | define) |
| 1385 | xxx='' |
| 1386 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 |
| 1387 | case "$osname" in |
| 1388 | os390|posix-bc) |
| 1389 | if cd x2p |
| 1390 | then |
| 1391 | rm -f y.tab.c y.tab.h |
| 1392 | case "$osname" in |
| 1393 | posix-bc) |
| 1394 | # we are using two different yaccs in BS2000 Posix! |
| 1395 | byacc a2p.y >/dev/null 2>&1 |
| 1396 | ;; |
| 1397 | *) # e.g. os390 |
| 1398 | yacc a2p.y >/dev/null 2>&1 |
| 1399 | ;; |
| 1400 | esac |
| 1401 | if cmp -s y.tab.c a2p.c |
| 1402 | then |
| 1403 | rm -f y.tab.c |
| 1404 | else |
| 1405 | echo "a2p.y -> a2p.c" >&2 |
| 1406 | mv -f y.tab.c a2p.c |
| 1407 | chmod u+w a2p.c |
| 1408 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
| 1409 | -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ |
| 1410 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c |
| 1411 | xxx="$xxx a2p.c" |
| 1412 | fi |
| 1413 | # In case somebody yacc -d:ed the a2p.y. |
| 1414 | if test -f y.tab.h |
| 1415 | then |
| 1416 | if cmp -s y.tab.h a2p.h |
| 1417 | then |
| 1418 | rm -f y.tab.h |
| 1419 | else |
| 1420 | echo "a2p.h -> a2p.h" >&2 |
| 1421 | mv -f y.tab.h a2p.h |
| 1422 | xxx="$xxx a2p.h" |
| 1423 | fi |
| 1424 | fi |
| 1425 | cd .. |
| 1426 | fi |
| 1427 | ;; |
| 1428 | vmesa) |
| 1429 | # Do nothing in VM/ESA. |
| 1430 | ;; |
| 1431 | *) |
| 1432 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 |
| 1433 | ;; |
| 1434 | esac |
| 1435 | case "$xxx" in |
| 1436 | '') echo "No parser files were regenerated. That's okay." >&2 ;; |
| 1437 | esac |
| 1438 | ;; |
| 1439 | esac |
| 1440 | |
| 1441 | # ex: set ts=8 sts=4 sw=4 noet: |