This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Fix FindBin under Win32, and document success
[perl5.git] / malloc.c
... / ...
CommitLineData
1/* malloc.c
2 *
3 */
4
5#ifndef lint
6# if defined(DEBUGGING) && !defined(NO_RCHECK)
7# define RCHECK
8# endif
9/*
10 * malloc.c (Caltech) 2/21/82
11 * Chris Kingsley, kingsley@cit-20.
12 *
13 * This is a very fast storage allocator. It allocates blocks of a small
14 * number of different sizes, and keeps free lists of each size. Blocks that
15 * don't exactly fit are passed up to the next larger size. In this
16 * implementation, the available sizes are 2^n-4 (or 2^n-12) bytes long.
17 * If PACK_MALLOC is defined, small blocks are 2^n bytes long.
18 * This is designed for use in a program that uses vast quantities of memory,
19 * but bombs when it runs out.
20 */
21
22#include "EXTERN.h"
23#include "perl.h"
24
25#ifdef DEBUGGING
26#undef DEBUG_m
27#define DEBUG_m(a) if (debug & 128) a
28#endif
29
30/* I don't much care whether these are defined in sys/types.h--LAW */
31
32#define u_char unsigned char
33#define u_int unsigned int
34#define u_short unsigned short
35
36/* 286 and atarist like big chunks, which gives too much overhead. */
37#if (defined(RCHECK) || defined(I286) || defined(atarist)) && defined(PACK_MALLOC)
38#undef PACK_MALLOC
39#endif
40
41
42/*
43 * The description below is applicable if PACK_MALLOC is not defined.
44 *
45 * The overhead on a block is at least 4 bytes. When free, this space
46 * contains a pointer to the next free block, and the bottom two bits must
47 * be zero. When in use, the first byte is set to MAGIC, and the second
48 * byte is the size index. The remaining bytes are for alignment.
49 * If range checking is enabled and the size of the block fits
50 * in two bytes, then the top two bytes hold the size of the requested block
51 * plus the range checking words, and the header word MINUS ONE.
52 */
53union overhead {
54 union overhead *ov_next; /* when free */
55#if MEM_ALIGNBYTES > 4
56 double strut; /* alignment problems */
57#endif
58 struct {
59 u_char ovu_magic; /* magic number */
60 u_char ovu_index; /* bucket # */
61#ifdef RCHECK
62 u_short ovu_size; /* actual block size */
63 u_int ovu_rmagic; /* range magic number */
64#endif
65 } ovu;
66#define ov_magic ovu.ovu_magic
67#define ov_index ovu.ovu_index
68#define ov_size ovu.ovu_size
69#define ov_rmagic ovu.ovu_rmagic
70};
71
72#ifdef DEBUGGING
73static void botch _((char *s));
74#endif
75static void morecore _((int bucket));
76static int findbucket _((union overhead *freep, int srchlen));
77
78#define MAGIC 0xff /* magic # on accounting info */
79#define RMAGIC 0x55555555 /* magic # on range info */
80#ifdef RCHECK
81# define RSLOP sizeof (u_int)
82# ifdef TWO_POT_OPTIMIZE
83# define MAX_SHORT_BUCKET 12
84# else
85# define MAX_SHORT_BUCKET 13
86# endif
87#else
88# define RSLOP 0
89#endif
90
91#ifdef PACK_MALLOC
92/*
93 * In this case it is assumed that if we do sbrk() in 2K units, we
94 * will get 2K aligned blocks. The bucket number of the given subblock is
95 * on the boundary of 2K block which contains the subblock.
96 * Several following bytes contain the magic numbers for the subblocks
97 * in the block.
98 *
99 * Sizes of chunks are powers of 2 for chunks in buckets <=
100 * MAX_PACKED, after this they are (2^n - sizeof(union overhead)) (to
101 * get alignment right).
102 *
103 * We suppose that starts of all the chunks in a 2K block are in
104 * different 2^n-byte-long chunks. If the top of the last chunk is
105 * aligned on a boundary of 2K block, this means that
106 * sizeof(union overhead)*"number of chunks" < 2^n, or
107 * sizeof(union overhead)*2K < 4^n, or n > 6 + log2(sizeof()/2)/2, if a
108 * chunk of size 2^n - overhead is used. Since this rules out n = 7
109 * for 8 byte alignment, we specialcase allocation of the first of 16
110 * 128-byte-long chunks.
111 *
112 * Note that with the above assumption we automatically have enough
113 * place for MAGIC at the start of 2K block. Note also that we
114 * overlay union overhead over the chunk, thus the start of the chunk
115 * is immediately overwritten after freeing.
116 */
117# define MAX_PACKED 6
118# define MAX_2_POT_ALGO ((1<<(MAX_PACKED + 1)) - M_OVERHEAD)
119# define TWOK_MASK ((1<<11) - 1)
120# define TWOK_MASKED(x) ((u_int)(x) & ~TWOK_MASK)
121# define TWOK_SHIFT(x) ((u_int)(x) & TWOK_MASK)
122# define OV_INDEXp(block) ((u_char*)(TWOK_MASKED(block)))
123# define OV_INDEX(block) (*OV_INDEXp(block))
124# define OV_MAGIC(block,bucket) (*(OV_INDEXp(block) + \
125 (TWOK_SHIFT(block)>>(bucket + 3)) + \
126 (bucket > MAX_NONSHIFT ? 1 : 0)))
127# define CHUNK_SHIFT 0
128
129static u_char n_blks[11 - 3] = {224, 120, 62, 31, 16, 8, 4, 2};
130static u_short blk_shift[11 - 3] = {256, 128, 64, 32,
131 16*sizeof(union overhead),
132 8*sizeof(union overhead),
133 4*sizeof(union overhead),
134 2*sizeof(union overhead),
135# define MAX_NONSHIFT 2 /* Shift 64 greater than chunk 32. */
136};
137
138#else /* !PACK_MALLOC */
139
140# define OV_MAGIC(block,bucket) (block)->ov_magic
141# define OV_INDEX(block) (block)->ov_index
142# define CHUNK_SHIFT 1
143#endif /* !PACK_MALLOC */
144
145# define M_OVERHEAD (sizeof(union overhead) + RSLOP)
146
147/*
148 * Big allocations are often of the size 2^n bytes. To make them a
149 * little bit better, make blocks of size 2^n+pagesize for big n.
150 */
151
152#ifdef TWO_POT_OPTIMIZE
153
154# ifndef PERL_PAGESIZE
155# define PERL_PAGESIZE 4096
156# endif
157# ifndef FIRST_BIG_TWO_POT
158# define FIRST_BIG_TWO_POT 14 /* 16K */
159# endif
160# define FIRST_BIG_BLOCK (1<<FIRST_BIG_TWO_POT) /* 16K */
161/* If this value or more, check against bigger blocks. */
162# define FIRST_BIG_BOUND (FIRST_BIG_BLOCK - M_OVERHEAD)
163/* If less than this value, goes into 2^n-overhead-block. */
164# define LAST_SMALL_BOUND ((FIRST_BIG_BLOCK>>1) - M_OVERHEAD)
165
166#endif /* TWO_POT_OPTIMIZE */
167
168#if defined(PERL_EMERGENCY_SBRK) && defined(PERL_CORE)
169
170#ifndef BIG_SIZE
171# define BIG_SIZE (1<<16) /* 64K */
172#endif
173
174static char *emergency_buffer;
175static MEM_SIZE emergency_buffer_size;
176
177static char *
178emergency_sbrk(size)
179 MEM_SIZE size;
180{
181 if (size >= BIG_SIZE) {
182 /* Give the possibility to recover: */
183 die("Out of memory during request for %i bytes", size);
184 /* croak may eat too much memory. */
185 }
186
187 if (!emergency_buffer) {
188 /* First offense, give a possibility to recover by dieing. */
189 /* No malloc involved here: */
190 GV **gvp = (GV**)hv_fetch(defstash, "^M", 2, 0);
191 SV *sv;
192 char *pv;
193
194 if (!gvp) gvp = (GV**)hv_fetch(defstash, "\015", 1, 0);
195 if (!gvp || !(sv = GvSV(*gvp)) || !SvPOK(sv)
196 || (SvLEN(sv) < (1<<11) - M_OVERHEAD))
197 return (char *)-1; /* Now die die die... */
198
199 /* Got it, now detach SvPV: */
200 pv = SvPV(sv, na);
201 /* Check alignment: */
202 if (((u_int)(pv - M_OVERHEAD)) & ((1<<11) - 1)) {
203 PerlIO_puts(PerlIO_stderr(),"Bad alignment of $^M!\n");
204 return (char *)-1; /* die die die */
205 }
206
207 emergency_buffer = pv - M_OVERHEAD;
208 emergency_buffer_size = SvLEN(sv) + M_OVERHEAD;
209 SvPOK_off(sv);
210 SvREADONLY_on(sv);
211 die("Out of memory!"); /* croak may eat too much memory. */
212 }
213 else if (emergency_buffer_size >= size) {
214 emergency_buffer_size -= size;
215 return emergency_buffer + emergency_buffer_size;
216 }
217
218 return (char *)-1; /* poor guy... */
219}
220
221#else /* !(defined(TWO_POT_OPTIMIZE) && defined(PERL_CORE)) */
222# define emergency_sbrk(size) -1
223#endif /* !(defined(TWO_POT_OPTIMIZE) && defined(PERL_CORE)) */
224
225/*
226 * nextf[i] is the pointer to the next free block of size 2^(i+3). The
227 * smallest allocatable block is 8 bytes. The overhead information
228 * precedes the data area returned to the user.
229 */
230#define NBUCKETS 30
231static union overhead *nextf[NBUCKETS];
232
233#ifdef USE_PERL_SBRK
234#define sbrk(a) Perl_sbrk(a)
235char * Perl_sbrk _((int size));
236#else
237extern char *sbrk();
238#endif
239
240#ifdef DEBUGGING_MSTATS
241/*
242 * nmalloc[i] is the difference between the number of mallocs and frees
243 * for a given block size.
244 */
245static u_int nmalloc[NBUCKETS];
246static u_int goodsbrk;
247static u_int sbrk_slack;
248static u_int start_slack;
249#endif
250
251#ifdef DEBUGGING
252#define ASSERT(p) if (!(p)) botch(STRINGIFY(p)); else
253static void
254botch(s)
255 char *s;
256{
257 PerlIO_printf(PerlIO_stderr(), "assertion botched: %s\n", s);
258 abort();
259}
260#else
261#define ASSERT(p)
262#endif
263
264Malloc_t
265malloc(nbytes)
266 register MEM_SIZE nbytes;
267{
268 register union overhead *p;
269 register int bucket = 0;
270 register MEM_SIZE shiftr;
271
272#if defined(DEBUGGING) || defined(RCHECK)
273 MEM_SIZE size = nbytes;
274#endif
275
276#ifdef PERL_CORE
277#ifdef HAS_64K_LIMIT
278 if (nbytes > 0xffff) {
279 PerlIO_printf(PerlIO_stderr(),
280 "Allocation too large: %lx\n", (long)nbytes);
281 my_exit(1);
282 }
283#endif /* HAS_64K_LIMIT */
284#ifdef DEBUGGING
285 if ((long)nbytes < 0)
286 croak("panic: malloc");
287#endif
288#endif /* PERL_CORE */
289
290 /*
291 * Convert amount of memory requested into
292 * closest block size stored in hash buckets
293 * which satisfies request. Account for
294 * space used per block for accounting.
295 */
296#ifdef PACK_MALLOC
297 if (nbytes == 0)
298 nbytes = 1;
299 else if (nbytes > MAX_2_POT_ALGO)
300#endif
301 {
302#ifdef TWO_POT_OPTIMIZE
303 if (nbytes >= FIRST_BIG_BOUND)
304 nbytes -= PERL_PAGESIZE;
305#endif
306 nbytes += M_OVERHEAD;
307 nbytes = (nbytes + 3) &~ 3;
308 }
309 shiftr = (nbytes - 1) >> 2;
310 /* apart from this loop, this is O(1) */
311 while (shiftr >>= 1)
312 bucket++;
313 /*
314 * If nothing in hash bucket right now,
315 * request more memory from the system.
316 */
317 if (nextf[bucket] == NULL)
318 morecore(bucket);
319 if ((p = (union overhead *)nextf[bucket]) == NULL) {
320#ifdef PERL_CORE
321 if (!nomemok) {
322 PerlIO_puts(PerlIO_stderr(),"Out of memory!\n");
323 my_exit(1);
324 }
325#else
326 return (NULL);
327#endif
328 }
329
330#ifdef PERL_CORE
331 DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05lu) malloc %ld bytes\n",
332 (unsigned long)(p+1),(unsigned long)(an++),(long)size));
333#endif /* PERL_CORE */
334
335 /* remove from linked list */
336#ifdef RCHECK
337 if (*((int*)p) & (sizeof(union overhead) - 1))
338 PerlIO_printf(PerlIO_stderr(), "Corrupt malloc ptr 0x%lx at 0x%lx\n",
339 (unsigned long)*((int*)p),(unsigned long)p);
340#endif
341 nextf[bucket] = p->ov_next;
342 OV_MAGIC(p, bucket) = MAGIC;
343#ifndef PACK_MALLOC
344 OV_INDEX(p) = bucket;
345#endif
346#ifdef RCHECK
347 /*
348 * Record allocated size of block and
349 * bound space with magic numbers.
350 */
351 nbytes = (size + M_OVERHEAD + 3) &~ 3;
352 if (nbytes <= 0x10000)
353 p->ov_size = nbytes - 1;
354 p->ov_rmagic = RMAGIC;
355 *((u_int *)((caddr_t)p + nbytes - RSLOP)) = RMAGIC;
356#endif
357 return ((Malloc_t)(p + CHUNK_SHIFT));
358}
359
360/*
361 * Allocate more memory to the indicated bucket.
362 */
363static void
364morecore(bucket)
365 register int bucket;
366{
367 register union overhead *op;
368 register int rnu; /* 2^rnu bytes will be requested */
369 register int nblks; /* become nblks blocks of the desired size */
370 register MEM_SIZE siz, needed;
371 int slack = 0;
372
373 if (nextf[bucket])
374 return;
375 if (bucket == (sizeof(MEM_SIZE)*8 - 3)) {
376 croak("Allocation too large");
377 }
378 /*
379 * Insure memory is allocated
380 * on a page boundary. Should
381 * make getpageize call?
382 */
383#ifndef atarist /* on the atari we dont have to worry about this */
384 op = (union overhead *)sbrk(0);
385# ifndef I286
386 if ((UV)op & (0x7FF >> CHUNK_SHIFT)) {
387 slack = (0x800 >> CHUNK_SHIFT) - ((UV)op & (0x7FF >> CHUNK_SHIFT));
388 (void)sbrk(slack);
389# if defined(DEBUGGING_MSTATS)
390 sbrk_slack += slack;
391# endif
392 }
393# else
394 /* The sbrk(0) call on the I286 always returns the next segment */
395# endif
396#endif /* atarist */
397
398#if !(defined(I286) || defined(atarist))
399 /* take 2k unless the block is bigger than that */
400 rnu = (bucket <= 8) ? 11 : bucket + 3;
401#else
402 /* take 16k unless the block is bigger than that
403 (80286s like large segments!), probably good on the atari too */
404 rnu = (bucket <= 11) ? 14 : bucket + 3;
405#endif
406 nblks = 1 << (rnu - (bucket + 3)); /* how many blocks to get */
407 needed = (MEM_SIZE)1 << rnu;
408#ifdef TWO_POT_OPTIMIZE
409 needed += (bucket >= (FIRST_BIG_TWO_POT - 3) ? PERL_PAGESIZE : 0);
410#endif
411 op = (union overhead *)sbrk(needed);
412 /* no more room! */
413 if (op == (union overhead *)-1) {
414 op = (union overhead *)emergency_sbrk(needed);
415 if (op == (union overhead *)-1)
416 return;
417 }
418#ifdef DEBUGGING_MSTATS
419 goodsbrk += needed;
420#endif
421 /*
422 * Round up to minimum allocation size boundary
423 * and deduct from block count to reflect.
424 */
425#ifndef I286
426# ifdef PACK_MALLOC
427 if ((UV)op & 0x7FF)
428 croak("panic: Off-page sbrk");
429# endif
430 if ((UV)op & 7) {
431 op = (union overhead *)(((UV)op + 8) & ~7);
432 nblks--;
433 }
434#else
435 /* Again, this should always be ok on an 80286 */
436#endif
437 /*
438 * Add new memory allocated to that on
439 * free list for this hash bucket.
440 */
441 siz = 1 << (bucket + 3);
442#ifdef PACK_MALLOC
443 *(u_char*)op = bucket; /* Fill index. */
444 if (bucket <= MAX_PACKED - 3) {
445 op = (union overhead *) ((char*)op + blk_shift[bucket]);
446 nblks = n_blks[bucket];
447# ifdef DEBUGGING_MSTATS
448 start_slack += blk_shift[bucket];
449# endif
450 } else if (bucket <= 11 - 1 - 3) {
451 op = (union overhead *) ((char*)op + blk_shift[bucket]);
452 /* nblks = n_blks[bucket]; */
453 siz -= sizeof(union overhead);
454 } else op++; /* One chunk per block. */
455#endif /* !PACK_MALLOC */
456 nextf[bucket] = op;
457#ifdef DEBUGGING_MSTATS
458 nmalloc[bucket] += nblks;
459#endif
460 while (--nblks > 0) {
461 op->ov_next = (union overhead *)((caddr_t)op + siz);
462 op = (union overhead *)((caddr_t)op + siz);
463 }
464 /* Not all sbrks return zeroed memory.*/
465 op->ov_next = (union overhead *)NULL;
466#ifdef PACK_MALLOC
467 if (bucket == 7 - 3) { /* Special case, explanation is above. */
468 union overhead *n_op = nextf[7 - 3]->ov_next;
469 nextf[7 - 3] = (union overhead *)((caddr_t)nextf[7 - 3]
470 - sizeof(union overhead));
471 nextf[7 - 3]->ov_next = n_op;
472 }
473#endif /* !PACK_MALLOC */
474}
475
476Free_t
477free(mp)
478 Malloc_t mp;
479{
480 register MEM_SIZE size;
481 register union overhead *op;
482 char *cp = (char*)mp;
483#ifdef PACK_MALLOC
484 u_char bucket;
485#endif
486
487#ifdef PERL_CORE
488 DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05lu) free\n",(unsigned long)cp,(unsigned long)(an++)));
489#endif /* PERL_CORE */
490
491 if (cp == NULL)
492 return;
493 op = (union overhead *)((caddr_t)cp
494 - sizeof (union overhead) * CHUNK_SHIFT);
495#ifdef PACK_MALLOC
496 bucket = OV_INDEX(op);
497#endif
498 if (OV_MAGIC(op, bucket) != MAGIC) {
499 static int bad_free_warn = -1;
500 if (bad_free_warn == -1) {
501 char *pbf = getenv("PERL_BADFREE");
502 bad_free_warn = (pbf) ? atoi(pbf) : 1;
503 }
504 if (!bad_free_warn)
505 return;
506#ifdef RCHECK
507 warn("%s free() ignored",
508 op->ov_rmagic == RMAGIC - 1 ? "Duplicate" : "Bad");
509#else
510 warn("Bad free() ignored");
511#endif
512 return; /* sanity */
513 }
514#ifdef RCHECK
515 ASSERT(op->ov_rmagic == RMAGIC);
516 if (OV_INDEX(op) <= MAX_SHORT_BUCKET)
517 ASSERT(*(u_int *)((caddr_t)op + op->ov_size + 1 - RSLOP) == RMAGIC);
518 op->ov_rmagic = RMAGIC - 1;
519#endif
520 ASSERT(OV_INDEX(op) < NBUCKETS);
521 size = OV_INDEX(op);
522 op->ov_next = nextf[size];
523 nextf[size] = op;
524}
525
526/*
527 * When a program attempts "storage compaction" as mentioned in the
528 * old malloc man page, it realloc's an already freed block. Usually
529 * this is the last block it freed; occasionally it might be farther
530 * back. We have to search all the free lists for the block in order
531 * to determine its bucket: 1st we make one pass thru the lists
532 * checking only the first block in each; if that fails we search
533 * ``reall_srchlen'' blocks in each list for a match (the variable
534 * is extern so the caller can modify it). If that fails we just copy
535 * however many bytes was given to realloc() and hope it's not huge.
536 */
537int reall_srchlen = 4; /* 4 should be plenty, -1 =>'s whole list */
538
539Malloc_t
540realloc(mp, nbytes)
541 Malloc_t mp;
542 MEM_SIZE nbytes;
543{
544 register MEM_SIZE onb;
545 union overhead *op;
546 char *res;
547 register int i;
548 int was_alloced = 0;
549 char *cp = (char*)mp;
550
551#ifdef DEBUGGING
552 MEM_SIZE size = nbytes;
553#endif
554
555#ifdef PERL_CORE
556#ifdef HAS_64K_LIMIT
557 if (nbytes > 0xffff) {
558 PerlIO_printf(PerlIO_stderr(),
559 "Reallocation too large: %lx\n", size);
560 my_exit(1);
561 }
562#endif /* HAS_64K_LIMIT */
563 if (!cp)
564 return malloc(nbytes);
565#ifdef DEBUGGING
566 if ((long)nbytes < 0)
567 croak("panic: realloc");
568#endif
569#endif /* PERL_CORE */
570
571 op = (union overhead *)((caddr_t)cp
572 - sizeof (union overhead) * CHUNK_SHIFT);
573 i = OV_INDEX(op);
574 if (OV_MAGIC(op, i) == MAGIC) {
575 was_alloced = 1;
576 } else {
577 /*
578 * Already free, doing "compaction".
579 *
580 * Search for the old block of memory on the
581 * free list. First, check the most common
582 * case (last element free'd), then (this failing)
583 * the last ``reall_srchlen'' items free'd.
584 * If all lookups fail, then assume the size of
585 * the memory block being realloc'd is the
586 * smallest possible.
587 */
588 if ((i = findbucket(op, 1)) < 0 &&
589 (i = findbucket(op, reall_srchlen)) < 0)
590 i = 0;
591 }
592 onb = (1L << (i + 3)) -
593#ifdef PACK_MALLOC
594 (i <= (MAX_PACKED - 3) ? 0 : M_OVERHEAD)
595#else
596 M_OVERHEAD
597#endif
598#ifdef TWO_POT_OPTIMIZE
599 + (i >= (FIRST_BIG_TWO_POT - 3) ? PERL_PAGESIZE : 0)
600#endif
601 ;
602 /*
603 * avoid the copy if same size block.
604 * We are not agressive with boundary cases. Note that it is
605 * possible for small number of cases give false negative if
606 * both new size and old one are in the bucket for
607 * FIRST_BIG_TWO_POT, but the new one is near the lower end.
608 */
609 if (was_alloced &&
610 nbytes <= onb && (nbytes > ( (onb >> 1) - M_OVERHEAD )
611#ifdef TWO_POT_OPTIMIZE
612 || (i == (FIRST_BIG_TWO_POT - 3)
613 && nbytes >= LAST_SMALL_BOUND )
614#endif
615 )) {
616#ifdef RCHECK
617 /*
618 * Record new allocated size of block and
619 * bound space with magic numbers.
620 */
621 if (OV_INDEX(op) <= MAX_SHORT_BUCKET) {
622 /*
623 * Convert amount of memory requested into
624 * closest block size stored in hash buckets
625 * which satisfies request. Account for
626 * space used per block for accounting.
627 */
628 nbytes += M_OVERHEAD;
629 nbytes = (nbytes + 3) &~ 3;
630 op->ov_size = nbytes - 1;
631 *((u_int *)((caddr_t)op + nbytes - RSLOP)) = RMAGIC;
632 }
633#endif
634 res = cp;
635 }
636 else {
637 if ((res = (char*)malloc(nbytes)) == NULL)
638 return (NULL);
639 if (cp != res) /* common optimization */
640 Copy(cp, res, (MEM_SIZE)(nbytes<onb?nbytes:onb), char);
641 if (was_alloced)
642 free(cp);
643 }
644
645#ifdef PERL_CORE
646#ifdef DEBUGGING
647 if (debug & 128) {
648 PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05lu) rfree\n",(unsigned long)res,(unsigned long)(an++));
649 PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05lu) realloc %ld bytes\n",
650 (unsigned long)res,(unsigned long)(an++),(long)size);
651 }
652#endif
653#endif /* PERL_CORE */
654 return ((Malloc_t)res);
655}
656
657/*
658 * Search ``srchlen'' elements of each free list for a block whose
659 * header starts at ``freep''. If srchlen is -1 search the whole list.
660 * Return bucket number, or -1 if not found.
661 */
662static int
663findbucket(freep, srchlen)
664 union overhead *freep;
665 int srchlen;
666{
667 register union overhead *p;
668 register int i, j;
669
670 for (i = 0; i < NBUCKETS; i++) {
671 j = 0;
672 for (p = nextf[i]; p && j != srchlen; p = p->ov_next) {
673 if (p == freep)
674 return (i);
675 j++;
676 }
677 }
678 return (-1);
679}
680
681Malloc_t
682calloc(elements, size)
683 register MEM_SIZE elements;
684 register MEM_SIZE size;
685{
686 long sz = elements * size;
687 Malloc_t p = malloc(sz);
688
689 if (p) {
690 memset((void*)p, 0, sz);
691 }
692 return p;
693}
694
695#ifdef DEBUGGING_MSTATS
696/*
697 * mstats - print out statistics about malloc
698 *
699 * Prints two lines of numbers, one showing the length of the free list
700 * for each size category, the second showing the number of mallocs -
701 * frees for each size category.
702 */
703void
704dump_mstats(s)
705 char *s;
706{
707 register int i, j;
708 register union overhead *p;
709 int topbucket=0, totfree=0, total=0;
710 u_int nfree[NBUCKETS];
711
712 for (i=0; i < NBUCKETS; i++) {
713 for (j = 0, p = nextf[i]; p; p = p->ov_next, j++)
714 ;
715 nfree[i] = j;
716 totfree += nfree[i] * (1 << (i + 3));
717 total += nmalloc[i] * (1 << (i + 3));
718 if (nmalloc[i])
719 topbucket = i;
720 }
721 if (s)
722 PerlIO_printf(PerlIO_stderr(), "Memory allocation statistics %s (buckets 8..%d)\n",
723 s, (1 << (topbucket + 3)) );
724 PerlIO_printf(PerlIO_stderr(), "%8d free:", totfree);
725 for (i=0; i <= topbucket; i++) {
726 PerlIO_printf(PerlIO_stderr(), (i<5 || i==7)?" %5d": (i<9)?" %3d":" %d", nfree[i]);
727 }
728 PerlIO_printf(PerlIO_stderr(), "\n%8d used:", total - totfree);
729 for (i=0; i <= topbucket; i++) {
730 PerlIO_printf(PerlIO_stderr(), (i<5 || i==7)?" %5d": (i<9)?" %3d":" %d", nmalloc[i] - nfree[i]);
731 }
732 PerlIO_printf(PerlIO_stderr(), "\nTotal sbrk(): %8d. Odd ends: sbrk(): %7d, malloc(): %7d bytes.\n",
733 goodsbrk + sbrk_slack, sbrk_slack, start_slack);
734}
735#else
736void
737dump_mstats(s)
738 char *s;
739{
740}
741#endif
742#endif /* lint */
743
744
745#ifdef USE_PERL_SBRK
746
747# ifdef NeXT
748# define PERL_SBRK_VIA_MALLOC
749# endif
750
751# ifdef PERL_SBRK_VIA_MALLOC
752# if defined(HIDEMYMALLOC) || defined(EMBEDMYMALLOC)
753# undef malloc
754# else
755# include "Error: -DPERL_SBRK_VIA_MALLOC needs -D(HIDE|EMBED)MYMALLOC"
756# endif
757
758/* it may seem schizophrenic to use perl's malloc and let it call system */
759/* malloc, the reason for that is only the 3.2 version of the OS that had */
760/* frequent core dumps within nxzonefreenolock. This sbrk routine put an */
761/* end to the cores */
762
763# define SYSTEM_ALLOC(a) malloc(a)
764
765# endif /* PERL_SBRK_VIA_MALLOC */
766
767static IV Perl_sbrk_oldchunk;
768static long Perl_sbrk_oldsize;
769
770# define PERLSBRK_32_K (1<<15)
771# define PERLSBRK_64_K (1<<16)
772
773char *
774Perl_sbrk(size)
775int size;
776{
777 IV got;
778 int small, reqsize;
779
780 if (!size) return 0;
781#ifdef PERL_CORE
782 reqsize = size; /* just for the DEBUG_m statement */
783#endif
784 if (size <= Perl_sbrk_oldsize) {
785 got = Perl_sbrk_oldchunk;
786 Perl_sbrk_oldchunk += size;
787 Perl_sbrk_oldsize -= size;
788 } else {
789 if (size >= PERLSBRK_32_K) {
790 small = 0;
791 } else {
792#ifndef PERL_CORE
793 reqsize = size;
794#endif
795 size = PERLSBRK_64_K;
796 small = 1;
797 }
798 got = (IV)SYSTEM_ALLOC(size);
799 if (small) {
800 /* Chunk is small, register the rest for future allocs. */
801 Perl_sbrk_oldchunk = got + reqsize;
802 Perl_sbrk_oldsize = size - reqsize;
803 }
804 }
805
806#ifdef PERL_CORE
807 DEBUG_m(PerlIO_printf(PerlIO_stderr(), "sbrk malloc size %ld (reqsize %ld), left size %ld, give addr 0x%lx\n",
808 size, reqsize, Perl_sbrk_oldsize, got));
809#endif
810
811 return (void *)got;
812}
813
814#endif /* ! defined USE_PERL_SBRK */