This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
https://perl5.git.perl.org / perl5.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Run Porting/new-perldelta.pl for v5.23.2
[perl5.git] / win32 / GNUmakefile
CommitLineData
342634f3 1#
2# Makefile to build perl on Windows using GNU make + gcc + MinGW.
3#
4# This is set up to build a perl.exe that runs off a shared library
16d5aac1 5# (perl523.dll). Also makes individual DLLs for the XS extensions.
342634f3 6#
7# The easiest way to customize the build process is to use parameters like this:
8#
9# c:\dev\perlsrc\win32> gmake INST_TOP=c:\sw\perl CCHOME=c:\sw\mingw USE_64_BIT_INT=define
10
11
12##
13## Make sure you read README.win32 *before* you mess with anything here!
14##
15
16#
17# We set this to point to cmd.exe in case GNU Make finds sh.exe in the path.
18# Comment this line out if necessary
19#
20SHELL := cmd.exe
21
22# define whether you want to use native gcc compiler or cross-compiler
23# possible values: gcc
24# i686-w64-mingw32-gcc
25# x86_64-w64-mingw32-gcc
26GCCBIN := gcc
27
28ifeq ($(GCCBIN),x86_64-w64-mingw32-gcc)
29GCCCROSS := x86_64-w64-mingw32
30endif
31ifeq ($(GCCBIN),i686-w64-mingw32-gcc)
32GCCCROSS := i686-w64-mingw32
33endif
34
35GCCTARGET := $(shell $(GCCBIN) -dumpmachine)
36GCCVER1 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%i)
37GCCVER2 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%j)
38GCCVER3 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%k)
39
40ifeq ($(GCCTARGET),x86_64-w64-mingw32)
41WIN64 := define
42ARCHITECTURE := x64
43endif
44ifeq ($(GCCTARGET),i686-w64-mingw32)
45WIN64 := undef
46ARCHITECTURE := x86
47endif
48
49##
50## Build configuration. Edit the values below to suit your needs.
51##
52
53#
54# Set these to wherever you want "gmake install" to put your
55# newly built perl.
56#
57INST_DRV := c:
58INST_TOP := $(INST_DRV)\perl
59
60#
61# Comment this out if you DON'T want your perl installation to be versioned.
62# This means that the new installation will overwrite any files from the
63# old installation at the same INST_TOP location. Leaving it enabled is
64# the safest route, as perl adds the extra version directory to all the
65# locations it installs files to. If you disable it, an alternative
66# versioned installation can be obtained by setting INST_TOP above to a
67# path that includes an arbitrary version string.
68#
509df534 69#INST_VER := \5.23.1
342634f3 70
71#
72# Comment this out if you DON'T want your perl installation to have
73# architecture specific components. This means that architecture-
74# specific files will be installed along with the architecture-neutral
75# files. Leaving it enabled is safer and more flexible, in case you
76# want to build multiple flavors of perl and install them together in
77# the same location. Commenting it out gives you a simpler
78# installation that is easier to understand for beginners.
79#
80#INST_ARCH := \$(ARCHNAME)
81
82#
83# Uncomment this if you want perl to run
84# $Config{sitelibexp}\sitecustomize.pl
85# before anything else. This script can then be set up, for example,
86# to add additional entries to @INC.
87#
88#USE_SITECUST := define
89
90#
91# uncomment to enable multiple interpreters. This is needed for fork()
92# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
93# and USE_ITHREADS below.
94#
95USE_MULTI := define
96
97#
98# Interpreter cloning/threads; now reasonably complete.
99# This should be enabled to get the fork() emulation. This needs (and
100# will auto-enable) USE_MULTI above.
101#
102USE_ITHREADS := define
103
104#
105# uncomment to enable the implicit "host" layer for all system calls
106# made by perl. This is also needed to get fork(). This needs (and
107# will auto-enable) USE_MULTI above.
108#
109USE_IMP_SYS := define
110
111#
112# Comment out next assign to disable perl's I/O subsystem and use compiler's
113# stdio for IO - depending on your compiler vendor and run time library you may
114# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
115# You will also be unable to take full advantage of perl5.8's support for multiple
116# encodings and may see lower IO performance. You have been warned.
117#
118USE_PERLIO := define
119
120#
121# Comment this out if you don't want to enable large file support for
122# some reason. Should normally only be changed to maintain compatibility
123# with an older release of perl.
124#
125USE_LARGE_FILES := define
126
127#
128# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
129# (If you're building a 64-bit perl then you will have 64-bit integers whether
130# or not this is uncommented.)
131# Note: This option is not supported in 32-bit MSVC60 builds.
132#
133#USE_64_BIT_INT := define
134
135#
136# Uncomment this if you want to support the use of long doubles.
137#
138#USE_LONG_DOUBLE :=define
139
140#
141# uncomment next line if you want debug version of perl (big,slow)
142# If not enabled, we automatically try to use maximum optimization
143# with all compilers that are known to have a working optimizer.
144#
145#CFG := Debug
146
147#
148# uncomment to enable linking with setargv.obj under the Visual C
149# compiler. Setting this options enables perl to expand wildcards in
150# arguments, but it may be harder to use alternate methods like
151# File::DosGlob that are more powerful. This option is supported only with
152# Visual C.
153#
154#USE_SETARGV := define
155
156#
157# set this if you wish to use perl's malloc
158# WARNING: Turning this on/off WILL break binary compatibility with extensions
159# you may have compiled with/without it. Be prepared to recompile all
160# extensions if you change the default. Currently, this cannot be enabled
161# if you ask for USE_IMP_SYS above.
162#
163#PERL_MALLOC := define
164
165#
166# set this to enable debugging mstats
167# This must be enabled to use the Devel::Peek::mstat() function. This cannot
168# be enabled without PERL_MALLOC as well.
169#
170#DEBUG_MSTATS := define
171
172#
173# set this to additionally provide a statically linked perl-static.exe.
174# Note that dynamic loading will not work with this perl, so you must
175# include required modules statically using the STATIC_EXT or ALL_STATIC
16d5aac1 176# variables below. A static library perl523s.lib will also be created.
342634f3 177# Ordinary perl.exe is not affected by this option.
178#
179#BUILD_STATIC := define
180
181#
182# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
183# extension get statically built
184# This will result in a very large perl executable, but the main purpose
185# is to have proper linking set so as to be able to create miscellaneous
186# executables with different built-in extensions
187#
188#ALL_STATIC := define
189
190#
191# set the install locations of the compiler include/libraries
192# Running VCVARS32.BAT is *required* when using Visual C.
193# Some versions of Visual C don't define MSVCDIR in the environment,
194# so you may have to set CCHOME explicitly (spaces in the path name should
195# not be quoted)
196#
197CCHOME := C:\MinGW
198
199#
200# Following sets $Config{incpath} and $Config{libpth}
201#
202
203ifneq ($(GCCCROSS),)
204CCINCDIR := $(CCHOME)\$(GCCCROSS)\include
205CCLIBDIR := $(CCHOME)\$(GCCCROSS)\lib
206CCDLLDIR := $(CCLIBDIR)
207ARCHPREFIX := $(GCCCROSS)-
208else
209CCINCDIR := $(CCHOME)\include
210CCLIBDIR := $(CCHOME)\lib
211CCDLLDIR := $(CCHOME)\bin
212ARCHPREFIX :=
213endif
214
215#
216# Additional compiler flags can be specified here.
217#
218BUILDOPT := $(BUILDOPTEXTRA)
219
220#
221# This should normally be disabled. Enabling it will disable the File::Glob
222# implementation of CORE::glob.
223#
224#BUILDOPT += -DPERL_EXTERNAL_GLOB
225
226#
227# Perl needs to read scripts in text mode so that the DATA filehandle
228# works correctly with seek() and tell(), or around auto-flushes of
229# all filehandles (e.g. by system(), backticks, fork(), etc).
230#
231# The current version on the ByteLoader module on CPAN however only
232# works if scripts are read in binary mode. But before you disable text
233# mode script reading (and break some DATA filehandle functionality)
234# please check first if an updated ByteLoader isn't available on CPAN.
235#
236BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
237
238#
239# specify semicolon-separated list of extra directories that modules will
240# look for libraries (spaces in path names need not be quoted)
241#
242EXTRALIBDIRS :=
243
244#
245# set this to your email address (perl will guess a value from
246# from your loginname and your hostname, which may not be right)
247#
248#EMAIL :=
249
250##
251## Build configuration ends.
252##
253
254##################### CHANGE THESE ONLY IF YOU MUST #####################
255
256PERL_MALLOC ?= undef
257DEBUG_MSTATS ?= undef
258
259USE_SITECUST ?= undef
260USE_MULTI ?= undef
261USE_ITHREADS ?= undef
262USE_IMP_SYS ?= undef
263USE_PERLIO ?= undef
264USE_LARGE_FILES ?= undef
265USE_64_BIT_INT ?= undef
266USE_LONG_DOUBLE ?= undef
267
268ifeq ($(USE_IMP_SYS),define)
269PERL_MALLOC = undef
270endif
271
272ifeq ($(PERL_MALLOC),undef)
273DEBUG_MSTATS = undef
274endif
275
276ifeq ($(DEBUG_MSTATS),define)
277BUILDOPT += -DPERL_DEBUGGING_MSTATS
278endif
279
280ifeq ("$(USE_IMP_SYS) $(USE_MULTI)","define undef")
281USE_MULTI = define
282endif
283
284ifeq ("$(USE_ITHREADS) $(USE_MULTI)","define undef")
285USE_MULTI = define
286endif
287
288ifeq ($(USE_SITECUST),define)
289BUILDOPT += -DUSE_SITECUSTOMIZE
290endif
291
292ifneq ($(USE_MULTI),undef)
293BUILDOPT += -DPERL_IMPLICIT_CONTEXT
294endif
295
296ifneq ($(USE_IMP_SYS),undef)
297BUILDOPT += -DPERL_IMPLICIT_SYS
298endif
299
300ifeq ($(WIN64),define)
301USE_64_BIT_INT = define
302endif
303
304ifeq ($(USE_MULTI),define)
305ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
306else
307ifeq ($(USE_PERLIO),define)
308ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
309else
310ARCHNAME = MSWin32-$(ARCHITECTURE)
311endif
312endif
313
314ifeq ($(USE_PERLIO),define)
315BUILDOPT += -DUSE_PERLIO
316endif
317
318ifeq ($(USE_ITHREADS),define)
319ARCHNAME := $(ARCHNAME)-thread
320endif
321
322ifneq ($(WIN64),define)
323ifeq ($(USE_64_BIT_INT),define)
324ARCHNAME := $(ARCHNAME)-64int
325endif
326endif
327
328ifeq ($(USE_LONG_DOUBLE),define)
329ARCHNAME := $(ARCHNAME)-ld
330endif
331
332ARCHDIR = ..\lib\$(ARCHNAME)
333COREDIR = ..\lib\CORE
334AUTODIR = ..\lib\auto
335LIBDIR = ..\lib
336EXTDIR = ..\ext
337DISTDIR = ..\dist
338CPANDIR = ..\cpan
339PODDIR = ..\pod
340HTMLDIR = .\html
341
342#
343INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
344INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
345INST_LIB = $(INST_TOP)$(INST_VER)\lib
346INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
347INST_COREDIR = $(INST_ARCHLIB)\CORE
348INST_HTML = $(INST_TOP)$(INST_VER)\html
349
350#
351# Programs to compile, build .lib files and link
352#
353
354MINIBUILDOPT :=
355
356CC = $(ARCHPREFIX)gcc
357LINK32 = $(ARCHPREFIX)g++
358LIB32 = $(ARCHPREFIX)ar rc
359IMPLIB = $(ARCHPREFIX)dlltool
360RSC = $(ARCHPREFIX)windres
361
362ifeq ($(USE_LONG_DOUBLE),define)
363BUILDOPT += -D__USE_MINGW_ANSI_STDIO
364MINIBUILDOPT += -D__USE_MINGW_ANSI_STDIO
365endif
366
367# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
368# See https://rt.perl.org/Ticket/Display.html?id=121505
369#
370GCCWRAPV := $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define))
371
372ifeq ($(GCCWRAPV),define)
373BUILDOPT += -fwrapv
374MINIBUILDOPT += -fwrapv
375endif
376
377i = .i
378o = .o
379a = .a
380
381#
382# Options
383#
384
385INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
386DEFINES = -DWIN32
387ifeq ($(WIN64),define)
388DEFINES += -DWIN64 -DCONSERVATIVE
389endif
390LOCDEFS = -DPERLDLL -DPERL_CORE
391SUBSYS = console
392CXX_FLAG = -xc++
393LIBC =
394LIBFILES = $(LIBC) \
395 -lmoldname -lkernel32 -luser32 -lgdi32 \
396 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
397 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
398 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
399
400ifeq ($(CFG),Debug)
401OPTIMIZE = -g -O2 -DDEBUGGING
402LINK_DBG = -g
403else
404OPTIMIZE = -s -O2
405LINK_DBG = -s
406endif
407
408EXTRACFLAGS =
409CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
410LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
411OBJOUT_FLAG = -o
412EXEOUT_FLAG = -o
413LIBOUT_FLAG =
414
415BUILDOPT += -fno-strict-aliasing -mms-bitfields
16d5aac1 416MINIBUILDOPT += -fno-strict-aliasing
342634f3 417CFLAGS_O = $(CFLAGS) $(BUILDOPT)
418
419# used to allow local linking flags that are not propogated into Config.pm,
420# currently unused
421# -- BKS, 12-12-1999
422PRIV_LINK_FLAGS =
423BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
424
425#################### do not edit below this line #######################
426############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
427
428%$(o): %.c
429 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
430
431%.i: %.c
432 $(CC) -c -I$(<D) $(CFLAGS_O) -E $< >$@
433
434%.c: %.y
435 $(NOOP)
436
437%.dll: %$(o)
438 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
439 $(IMPLIB) --input-def $(*F).def --output-lib $(*F).a $@
440
441%.res: %.rc
442 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
443
444#
445# various targets
446MINIPERL = ..\miniperl.exe
447MINIDIR = mini
448PERLEXE = ..\perl.exe
449WPERLEXE = ..\wperl.exe
450PERLEXESTATIC = ..\perl-static.exe
451STATICDIR = .\static.tmp
452GLOBEXE = ..\perlglob.exe
453CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
454GENUUDMAP = ..\generate_uudmap.exe
455ifeq ($(BUILD_STATIC),define)
456PERLSTATIC = static
457else
458ifeq ($(ALL_STATIC),define)
459PERLSTATIC = static
460else
461PERLSTATIC =
462endif
463endif
464
465# Unicode data files generated by mktables
466UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
467 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
468 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
469 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
470
471# Directories of Unicode data files generated by mktables
472UNIDATADIR1 = ..\lib\unicore\To
473UNIDATADIR2 = ..\lib\unicore\lib
474
475PERLEXE_MANIFEST= .\perlexe.manifest
476PERLEXE_ICO = .\perlexe.ico
477PERLEXE_RES = .\perlexe.res
478PERLDLL_RES =
479
480# Nominate a target which causes extensions to be re-built
481# This used to be $(PERLEXE), but at worst it is the .dll that they depend
482# on and really only the interface - i.e. the .def file used to export symbols
483# from the .dll
484PERLDEP = perldll.def
485
486
487PL2BAT = bin\pl2bat.pl
488
489UTILS = \
490 ..\utils\h2ph \
491 ..\utils\splain \
492 ..\utils\perlbug \
493 ..\utils\pl2pm \
494 ..\utils\c2ph \
495 ..\utils\pstruct \
496 ..\utils\h2xs \
497 ..\utils\perldoc \
498 ..\utils\perlivp \
499 ..\utils\libnetcfg \
500 ..\utils\enc2xs \
501 ..\utils\piconv \
502 ..\utils\corelist \
503 ..\utils\cpan \
504 ..\utils\xsubpp \
505 ..\utils\pod2html \
506 ..\utils\prove \
507 ..\utils\ptar \
508 ..\utils\ptardiff \
509 ..\utils\ptargrep \
510 ..\utils\zipdetails \
511 ..\utils\shasum \
512 ..\utils\instmodsh \
513 ..\utils\json_pp \
514 bin\exetype.pl \
515 bin\runperl.pl \
516 bin\pl2bat.pl \
517 bin\perlglob.pl \
518 bin\search.pl
519
520CFGSH_TMPL = config.gc
521CFGH_TMPL = config_H.gc
16d5aac1
TC		 522PERLIMPLIB = ..\libperl523$(a)
523PERLSTATICLIB = ..\libperl523s$(a)
342634f3 524INT64 = long long
525
526# makedef.pl must be updated if this changes, and this should normally
527# only change when there is an incompatible revision of the public API.
16d5aac1 528PERLDLL = ..\perl523.dll
342634f3 529
530XCOPY = xcopy /f /r /i /d /y
531RCOPY = xcopy /f /r /i /e /d /y
532NOOP = @rem
533
534MICROCORE_SRC = \
535 ..\av.c \
536 ..\caretx.c \
537 ..\deb.c \
538 ..\doio.c \
539 ..\doop.c \
540 ..\dump.c \
541 ..\globals.c \
542 ..\gv.c \
16d5aac1 543 ..\mro_core.c \
342634f3 544 ..\hv.c \
545 ..\locale.c \
546 ..\keywords.c \
547 ..\mathoms.c \
548 ..\mg.c \
549 ..\numeric.c \
550 ..\op.c \
551 ..\pad.c \
552 ..\perl.c \
553 ..\perlapi.c \
554 ..\perly.c \
555 ..\pp.c \
556 ..\pp_ctl.c \
557 ..\pp_hot.c \
558 ..\pp_pack.c \
559 ..\pp_sort.c \
560 ..\pp_sys.c \
561 ..\reentr.c \
562 ..\regcomp.c \
563 ..\regexec.c \
564 ..\run.c \
565 ..\scope.c \
566 ..\sv.c \
567 ..\taint.c \
568 ..\toke.c \
569 ..\universal.c \
570 ..\utf8.c \
571 ..\util.c
572
573EXTRACORE_SRC += perllib.c
574
575ifeq ($(PERL_MALLOC),define)
576EXTRACORE_SRC += ..\malloc.c
577endif
578
579EXTRACORE_SRC += ..\perlio.c
580
581WIN32_SRC = \
582 .\win32.c \
583 .\win32sck.c \
584 .\win32thread.c \
585 .\fcrypt.c
586
587# We need this for miniperl build unless we override canned
588# config.h #define building mini\*
589#ifeq ($(USE_PERLIO)" == "define"
590WIN32_SRC += .\win32io.c
591#endif
592
593CORE_NOCFG_H = \
594 ..\av.h \
595 ..\cop.h \
596 ..\cv.h \
597 ..\dosish.h \
598 ..\embed.h \
599 ..\form.h \
600 ..\gv.h \
601 ..\handy.h \
602 ..\hv.h \
603 ..\hv_func.h \
604 ..\iperlsys.h \
605 ..\mg.h \
606 ..\nostdio.h \
607 ..\op.h \
608 ..\opcode.h \
609 ..\perl.h \
610 ..\perlapi.h \
611 ..\perlsdio.h \
612 ..\perly.h \
613 ..\pp.h \
614 ..\proto.h \
615 ..\regcomp.h \
616 ..\regexp.h \
617 ..\scope.h \
618 ..\sv.h \
619 ..\thread.h \
620 ..\unixish.h \
621 ..\utf8.h \
622 ..\util.h \
623 ..\warnings.h \
624 ..\XSUB.h \
625 ..\EXTERN.h \
626 ..\perlvars.h \
627 ..\intrpvar.h \
628 .\include\dirent.h \
629 .\include\netdb.h \
630 .\include\sys\errno2.h \
631 .\include\sys\socket.h \
632 .\win32.h
633
634CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
635
636UUDMAP_H = ..\uudmap.h
637BITCOUNT_H = ..\bitcount.h
638MG_DATA_H = ..\mg_data.h
639GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
640
641MICROCORE_OBJ = $(MICROCORE_SRC:.c=.o)
642CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.o)
643WIN32_OBJ = $(WIN32_SRC:.c=.o)
644
645MINICORE_OBJ = $(subst ..\,mini\,$(MICROCORE_OBJ)) \
646 $(MINIDIR)\miniperlmain$(o) \
647 $(MINIDIR)\perlio$(o)
648MINIWIN32_OBJ = $(subst .\,mini\,$(WIN32_OBJ))
649MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
650DLL_OBJ = $(DYNALOADER)
651GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.o)
652
653PERLDLL_OBJ = $(CORE_OBJ)
654PERLEXE_OBJ = perlmain$(o)
655PERLEXEST_OBJ = perlmainst$(o)
656
657PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
658
659ifneq ($(USE_SETARGV),)
660SETARGV_OBJ = setargv$(o)
661endif
662
663ifeq ($(ALL_STATIC),define)
664# some exclusions, unfortunately, until fixed:
665# - MakeMaker isn't capable enough for SDBM_File (small bug)
666STATIC_EXT = * !SDBM_File
667else
668# specify static extensions here, for example:
669# (be sure to include Win32CORE to load Win32 on demand)
670#STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib
671STATIC_EXT = Win32CORE
672endif
673
674DYNALOADER = ..\DynaLoader$(o)
675
676# vars must be separated by "\t+~\t+", since we're using the tempfile
677# version of config_sh.pl (we were overflowing someone's buffer by
678# trying to fit them all on the command line)
679# -- BKS 10-17-1999
680CFG_VARS = \
681 "INST_TOP=$(INST_TOP)" \
682 "INST_VER=$(INST_VER)" \
683 "INST_ARCH=$(INST_ARCH)" \
684 "archname=$(ARCHNAME)" \
685 "cc=$(CC)" \
686 "ld=$(LINK32)" \
687 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT)" \
688 "cf_email=$(EMAIL)" \
689 "d_mymalloc=$(PERL_MALLOC)" \
690 "libs=$(LIBFILES)" \
691 "incpath=$(CCINCDIR)" \
692 "libperl=$(subst ..\,,$(PERLIMPLIB))" \
693 "libpth=$(CCLIBDIR);$(EXTRALIBDIRS)" \
694 "libc=$(LIBC)" \
695 "make=$(MAKE)" \
696 "_o=$(o)" \
697 "obj_ext=$(o)" \
698 "_a=$(a)" \
699 "lib_ext=$(a)" \
700 "static_ext=$(STATIC_EXT)" \
701 "usethreads=$(USE_ITHREADS)" \
702 "useithreads=$(USE_ITHREADS)" \
703 "usemultiplicity=$(USE_MULTI)" \
704 "useperlio=$(USE_PERLIO)" \
705 "use64bitint=$(USE_64_BIT_INT)" \
706 "uselongdouble=$(USE_LONG_DOUBLE)" \
707 "uselargefiles=$(USE_LARGE_FILES)" \
708 "usesitecustomize=$(USE_SITECUST)" \
709 "LINK_FLAGS=$(LINK_FLAGS)" \
710 "optimize=$(OPTIMIZE)" \
711 "ARCHPREFIX=$(ARCHPREFIX)" \
712 "WIN64=$(WIN64)"
713
714#
715# Top targets
716#
717
718.PHONY: all info
719
720all : info .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
721 $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
722 $(PERLEXE) Extensions Extensions_nonxs $(PERLSTATIC)
723
724info :
725 @echo # GCCBIN=$(GCCBIN)
726 @echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3)
727 @echo # GCCTARGET=$(GCCTARGET)
728 @echo # GCCCROSS=$(GCCCROSS)
729 @echo # WIN64=$(WIN64)
730 @echo # ARCHITECTURE=$(ARCHITECTURE)
731 @echo # ARCHNAME=$(ARCHNAME)
732 @echo # MAKE=$(MAKE)
733ifeq ($(GCCTARGET),)
734 @echo Unable to detect gcc and/or architecture!
735 @exit 1
736endif
737
738
739regnodes : ..\regnodes.h
740
741..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
742
743..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
744
745reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
746 $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
747 Extensions_reonly
748
749static: $(PERLEXESTATIC)
750
751#----------------------------------------------------------------
752
753$(GLOBEXE) : perlglob$(o)
754 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
755
756perlglob$(o) : perlglob.c
757
758config.w32 : $(CFGSH_TMPL)
759 copy $(CFGSH_TMPL) config.w32
760
761#
762# Copy the template config.h and set configurables at the end of it
763# as per the options chosen and compiler used.
764# Note: This config.h is only used to build miniperl.exe anyway, but
765# it's as well to have its options correct to be sure that it builds
766# and so that it's "-V" options are correct for use by makedef.pl. The
767# real config.h used to build perl.exe is generated from the top-level
768# config_h.SH by config_h.PL (run by miniperl.exe).
769#
770.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
771 -del /f config.h
772 copy $(CFGH_TMPL) config.h
773 @echo.>>$@
774 @echo #ifndef _config_h_footer_>>$@
775 @echo #define _config_h_footer_>>$@
776 @echo #undef Off_t>>$@
777 @echo #undef LSEEKSIZE>>$@
778 @echo #undef Off_t_size>>$@
779 @echo #undef PTRSIZE>>$@
780 @echo #undef SSize_t>>$@
781 @echo #undef HAS_ATOLL>>$@
782 @echo #undef HAS_STRTOLL>>$@
783 @echo #undef HAS_STRTOULL>>$@
784 @echo #undef Size_t_size>>$@
785 @echo #undef IVTYPE>>$@
786 @echo #undef UVTYPE>>$@
787 @echo #undef IVSIZE>>$@
788 @echo #undef UVSIZE>>$@
789 @echo #undef NV_PRESERVES_UV>>$@
790 @echo #undef NV_PRESERVES_UV_BITS>>$@
791 @echo #undef IVdf>>$@
792 @echo #undef UVuf>>$@
793 @echo #undef UVof>>$@
794 @echo #undef UVxf>>$@
795 @echo #undef UVXf>>$@
796 @echo #undef USE_64_BIT_INT>>$@
797 @echo #undef Gconvert>>$@
798 @echo #undef HAS_FREXPL>>$@
799 @echo #undef HAS_ISNANL>>$@
800 @echo #undef HAS_MODFL>>$@
801 @echo #undef HAS_MODFL_PROTO>>$@
802 @echo #undef HAS_SQRTL>>$@
803 @echo #undef HAS_STRTOLD>>$@
804 @echo #undef PERL_PRIfldbl>>$@
805 @echo #undef PERL_PRIgldbl>>$@
806 @echo #undef PERL_PRIeldbl>>$@
807 @echo #undef PERL_SCNfldbl>>$@
808 @echo #undef NVTYPE>>$@
809 @echo #undef NVSIZE>>$@
810 @echo #undef LONG_DOUBLESIZE>>$@
811 @echo #undef NV_OVERFLOWS_INTEGERS_AT>>$@
812 @echo #undef NVef>>$@
813 @echo #undef NVff>>$@
814 @echo #undef NVgf>>$@
815 @echo #undef USE_LONG_DOUBLE>>$@
816ifeq ($(USE_LARGE_FILES),define)
817 @echo #define Off_t $(INT64)>>$@
818 @echo #define LSEEKSIZE ^8>>$@
819 @echo #define Off_t_size ^8>>$@
820else
821 @echo #define Off_t long>>$@
822 @echo #define LSEEKSIZE ^4>>$@
823 @echo #define Off_t_size ^4>>$@
824endif
825ifeq ($(WIN64),define)
826 @echo #define PTRSIZE ^8>>$@
827 @echo #define SSize_t $(INT64)>>$@
828 @echo #define HAS_ATOLL>>$@
829 @echo #define HAS_STRTOLL>>$@
830 @echo #define HAS_STRTOULL>>$@
831 @echo #define Size_t_size ^8>>$@
832else
833 @echo #define PTRSIZE ^4>>$@
834 @echo #define SSize_t int>>$@
835 @echo #undef HAS_ATOLL>>$@
836 @echo #undef HAS_STRTOLL>>$@
837 @echo #undef HAS_STRTOULL>>$@
838 @echo #define Size_t_size ^4>>$@
839endif
840ifeq ($(USE_64_BIT_INT),define)
841 @echo #define IVTYPE $(INT64)>>$@
842 @echo #define UVTYPE unsigned $(INT64)>>$@
843 @echo #define IVSIZE ^8>>$@
844 @echo #define UVSIZE ^8>>$@
845ifeq ($(USE_LONG_DOUBLE),define)
846 @echo #define NV_PRESERVES_UV>>$@
847 @echo #define NV_PRESERVES_UV_BITS 64>>$@
848else
849 @echo #undef NV_PRESERVES_UV>>$@
850 @echo #define NV_PRESERVES_UV_BITS 53>>$@
851endif
852 @echo #define IVdf "I64d">>$@
853 @echo #define UVuf "I64u">>$@
854 @echo #define UVof "I64o">>$@
855 @echo #define UVxf "I64x">>$@
856 @echo #define UVXf "I64X">>$@
857 @echo #define USE_64_BIT_INT>>$@
858else
859 @echo #define IVTYPE long>>$@
860 @echo #define UVTYPE unsigned long>>$@
861 @echo #define IVSIZE ^4>>$@
862 @echo #define UVSIZE ^4>>$@
863 @echo #define NV_PRESERVES_UV>>$@
864 @echo #define NV_PRESERVES_UV_BITS 32>>$@
865 @echo #define IVdf "ld">>$@
866 @echo #define UVuf "lu">>$@
867 @echo #define UVof "lo">>$@
868 @echo #define UVxf "lx">>$@
869 @echo #define UVXf "lX">>$@
870 @echo #undef USE_64_BIT_INT>>$@
871endif
872ifeq ($(USE_LONG_DOUBLE),define)
873 @echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*""Lg",(n),(x))>>$@
874 @echo #define HAS_FREXPL>>$@
875 @echo #define HAS_ISNANL>>$@
876 @echo #define HAS_MODFL>>$@
877 @echo #define HAS_MODFL_PROTO>>$@
878 @echo #define HAS_SQRTL>>$@
879 @echo #define HAS_STRTOLD>>$@
880 @echo #define PERL_PRIfldbl "Lf">>$@
881 @echo #define PERL_PRIgldbl "Lg">>$@
882 @echo #define PERL_PRIeldbl "Le">>$@
883 @echo #define PERL_SCNfldbl "Lf">>$@
884 @echo #define NVTYPE long double>>$@
885ifeq ($(WIN64),define)
886 @echo #define NVSIZE ^16>>$@
887 @echo #define LONG_DOUBLESIZE ^16>>$@
888else
889 @echo #define NVSIZE ^12>>$@
890 @echo #define LONG_DOUBLESIZE ^12>>$@
891endif
892 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0>>$@
893 @echo #define NVef "Le">>$@
894 @echo #define NVff "Lf">>$@
895 @echo #define NVgf "Lg">>$@
896 @echo #define USE_LONG_DOUBLE>>$@
897else
898 @echo #define Gconvert(x,n,t,b) sprintf((b),"%%.*g",(n),(x))>>$@
899 @echo #undef HAS_FREXPL>>$@
900 @echo #undef HAS_ISNANL>>$@
901 @echo #undef HAS_MODFL>>$@
902 @echo #undef HAS_MODFL_PROTO>>$@
903 @echo #undef HAS_SQRTL>>$@
904 @echo #undef HAS_STRTOLD>>$@
905 @echo #undef PERL_PRIfldbl>>$@
906 @echo #undef PERL_PRIgldbl>>$@
907 @echo #undef PERL_PRIeldbl>>$@
908 @echo #undef PERL_SCNfldbl>>$@
909 @echo #define NVTYPE double>>$@
910 @echo #define NVSIZE ^8>>$@
911 @echo #define LONG_DOUBLESIZE ^8>>$@
912 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0>>$@
913 @echo #define NVef "e">>$@
914 @echo #define NVff "f">>$@
915 @echo #define NVgf "g">>$@
916 @echo #undef USE_LONG_DOUBLE>>$@
917endif
918 @echo #endif>>$@
919
920..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
921 cd .. && miniperl -Ilib make_patchnum.pl
922
923# make sure that we recompile perl.c if the git version changes
924..\perl$(o) : ..\git_version.h
925
926..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
927 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
928
929# This target is for when changes to the main config.sh happen.
930# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
931# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
932# this target to regenerate config_H.gc.
933regen_config_h:
934 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS)) $(CFGSH_TMPL) > ..\config.sh
935 $(MINIPERL) -I..\lib ..\configpm --chdir=..
936 -del /f $(CFGH_TMPL)
937 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
938 rename config.h $(CFGH_TMPL)
939
940$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
941 $(MINIPERL) -I..\lib ..\configpm --chdir=..
942 if exist lib\* $(RCOPY) "lib\*.*" ..\lib\$(NULL)
943 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
944 $(XCOPY) "*.h" $(COREDIR)\$(NULL)
945 $(RCOPY) include $(COREDIR)\$(NULL)
946 $(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
947 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
948
949# See the comment in Makefile.SH explaining this seemingly cranky ordering
950$(MINIPERL) : ..\lib\buildcustomize.pl
951
952..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
953 $(LINK32) -mconsole -o $(MINIPERL) $(BLINK_FLAGS) $(MINI_OBJ) $(LIBFILES)
954 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
955
956$(MINIDIR) :
957 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
958
959$(MINICORE_OBJ) : $(CORE_NOCFG_H)
960 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
961
962$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
963 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c
964
965# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
966# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
967# unless the .IF is true), so instead we use a else with the default.
968# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
969
970perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
971ifeq ($(USE_IMP_SYS),define)
972 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
973else
974 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
975endif
976
977# 1. we don't want to rebuild miniperl.exe when config.h changes
978# 2. we don't want to rebuild miniperl.exe with non-default config.h
979# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
980$(MINI_OBJ) : $(CORE_NOCFG_H)
981
982$(WIN32_OBJ) : $(CORE_H)
983
984$(CORE_OBJ) : $(CORE_H)
985
986$(DLL_OBJ) : $(CORE_H)
987
988perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
989 $(MINIPERL) -I..\lib create_perllibst_h.pl
990 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
991 $(BUILDOPT) CCTYPE=GCC TARG_DIR=..\ > perldll.def
992
993$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
994 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
995 $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES)
996 $(IMPLIB) --output-lib $(PERLIMPLIB) \
997 --dllname $(PERLDLL) \
998 --def perldll.def \
999 --base-file perl.base \
1000 --output-exp perl.exp
1001 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1002 $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES) perl.exp
1003 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1004
1005$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
1006 $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
1007 if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
1008 for %%i in ($(shell type Extensions_static)) do \
1009 @mkdir $(STATICDIR) && cd $(STATICDIR) && \
1010 $(ARCHPREFIX)ar x ..\%%i && \
1011 $(ARCHPREFIX)ar q ..\$@ *$(o) && \
1012 cd .. && rmdir /s /q $(STATICDIR)
1013 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1014
1015$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1016
1017$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1018
1019$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1020
1021$(BITCOUNT_H) : $(GENUUDMAP)
1022 $(GENUUDMAP) $(GENERATED_HEADERS)
1023
1024$(GENUUDMAP_OBJ) : ..\mg_raw.h
1025
1026$(GENUUDMAP) : $(GENUUDMAP_OBJ)
1027 $(LINK32) -o $@ $(BLINK_FLAGS) $(GENUUDMAP_OBJ) $(LIBFILES)
1028
1029perlmain.c : runperl.c
1030 copy runperl.c perlmain.c
1031
1032perlmain$(o) : perlmain.c
1033 $(CC) $(subst -DPERLDLL,-UPERLDLL,$(CFLAGS_O)) $(OBJOUT_FLAG)$@ -c perlmain.c
1034
1035perlmainst.c : runperl.c
1036 copy runperl.c perlmainst.c
1037
1038perlmainst$(o) : perlmainst.c
1039 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1040
1041$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1042 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1043 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1044 copy $(PERLEXE) $(WPERLEXE)
1045 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1046
1047$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1048 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1049 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
1050
1051MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1052 $(MINIPERL) -I..\lib ..\mkppport
1053
1054#-------------------------------------------------------------------------------
1055# There's no direct way to mark a dependency on
1056# DynaLoader.pm, so this will have to do
1057Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1058 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1059 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1060
1061Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1062 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1063 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1064
1065Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1066 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1067 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1068 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1069
1070Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
1071 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1072 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1073
1074$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1075 $(XCOPY) "..\*.h" $(COREDIR)\$(NULL)
1076 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1077
1078Extensions_clean :
1079 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1080
1081Extensions_realclean :
1082 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1083
1084#-------------------------------------------------------------------------------
1085
1086doc: $(PERLEXE) ..\pod\perltoc.pod
1087 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1088 --podpath=pod:lib:utils --htmlroot="file://$(subst :,|,$(INST_HTML))"\
1089 --recurse
1090
1091..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
1092 $(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
1093
1094# Note that this next section is parsed (and regenerated) by pod/buildtoc
1095# so please check that script before making structural changes here
1096utils: $(PERLEXE) ..\utils\Makefile
1097 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1098 copy ..\README.aix ..\pod\perlaix.pod
1099 copy ..\README.amiga ..\pod\perlamiga.pod
1100 copy ..\README.android ..\pod\perlandroid.pod
1101 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1102 copy ..\README.ce ..\pod\perlce.pod
1103 copy ..\README.cn ..\pod\perlcn.pod
1104 copy ..\README.cygwin ..\pod\perlcygwin.pod
1105 copy ..\README.dos ..\pod\perldos.pod
1106 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1107 copy ..\README.haiku ..\pod\perlhaiku.pod
1108 copy ..\README.hpux ..\pod\perlhpux.pod
1109 copy ..\README.hurd ..\pod\perlhurd.pod
1110 copy ..\README.irix ..\pod\perlirix.pod
1111 copy ..\README.jp ..\pod\perljp.pod
1112 copy ..\README.ko ..\pod\perlko.pod
1113 copy ..\README.linux ..\pod\perllinux.pod
1114 copy ..\README.macos ..\pod\perlmacos.pod
1115 copy ..\README.macosx ..\pod\perlmacosx.pod
1116 copy ..\README.netware ..\pod\perlnetware.pod
1117 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1118 copy ..\README.os2 ..\pod\perlos2.pod
1119 copy ..\README.os390 ..\pod\perlos390.pod
1120 copy ..\README.os400 ..\pod\perlos400.pod
1121 copy ..\README.plan9 ..\pod\perlplan9.pod
1122 copy ..\README.qnx ..\pod\perlqnx.pod
1123 copy ..\README.riscos ..\pod\perlriscos.pod
1124 copy ..\README.solaris ..\pod\perlsolaris.pod
1125 copy ..\README.symbian ..\pod\perlsymbian.pod
1126 copy ..\README.synology ..\pod\perlsynology.pod
1127 copy ..\README.tru64 ..\pod\perltru64.pod
1128 copy ..\README.tw ..\pod\perltw.pod
1129 copy ..\README.vos ..\pod\perlvos.pod
1130 copy ..\README.win32 ..\pod\perlwin32.pod
16d5aac1 1131 copy ..\pod\perldelta.pod ..\pod\perl5230delta.pod
342634f3 1132 $(PERLEXE) $(PL2BAT) $(UTILS)
1133 $(MINIPERL) -I..\lib ..\autodoc.pl ..
1134 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
1135
1136..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1137 $(PERLEXE) -f ..\pod\buildtoc -q
1138
1139# Note that the pod cleanup in this next section is parsed (and regenerated
1140# by pod/buildtoc so please check that script before making changes here
1141
1142distclean: realclean
1143 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1144 $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
1145 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1146 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1147 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1148 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1149 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1150 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1151 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1152 -del /f $(LIBDIR)\File\Glob.pm
1153 -del /f $(LIBDIR)\Storable.pm
1154 -del /f $(LIBDIR)\Sys\Hostname.pm
1155 -del /f $(LIBDIR)\Time\HiRes.pm
1156 -del /f $(LIBDIR)\Unicode\Normalize.pm
1157 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1158 -del /f $(LIBDIR)\Win32.pm
1159 -del /f $(LIBDIR)\Win32CORE.pm
1160 -del /f $(LIBDIR)\Win32API\File.pm
1161 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1162 -del /f $(LIBDIR)\buildcustomize.pl
1163 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1164 -del /f *.def *.map
1165 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1166 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1167 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1168 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1169 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
1170 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1171 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
1172 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1173 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1174 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1175 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1176 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1177 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1178 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
1179 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1180 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1181 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1182 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1183 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1184 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
1185 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
1186 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1187 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1188 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1189 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
1190 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
1191 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1192 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1193 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
1194 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1195 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1196 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1197 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1198 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1199 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1200 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1201 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1202 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1203 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
1204 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1205 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1206 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1207 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1208 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1209 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
1210 -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
1211 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1212 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1213 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
1214 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1215 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
1216 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1217 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1218 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1219 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1220 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
1221 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
1222 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
1223 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1224 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1225 -cd $(PODDIR) && del /f *.html *.bat roffitall \
16d5aac1 1226 perl5230delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
342634f3 1227 perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1228 perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1229 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1230 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1231 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1232 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1233 perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
1234 perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
1235 perlwin32.pod
1236 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1237 perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
1238 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
1239 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1240 perlmainst.c
1241 -del /f $(CONFIGPM)
1242 -del /f ..\lib\Config_git.pl
1243 -del /f "bin\*.bat"
1244 -del /f perllibst.h
1245 -del /f $(PERLEXE_RES) perl.base
1246 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1247 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1248 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1249 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1250 -del /s ..\utils\Makefile
1251 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1252 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1253 -if exist pod2htmd.tmp del pod2htmd.tmp
1254 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1255 -del /f ..\t\test_state
1256
1257install : all installbare installhtml
1258
1259installbare : utils ..\pod\perltoc.pod
1260 $(PERLEXE) ..\installperl
1261 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\$(NULL)
1262 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\$(NULL)
1263 $(XCOPY) $(GLOBEXE) $(INST_BIN)\$(NULL)
1264 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\$(NULL)
1265 $(XCOPY) "bin\*.bat" $(INST_SCRIPT)\$(NULL)
1266
1267installhtml : doc
1268 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\$(NULL)
1269
1270inst_lib : $(CONFIGPM)
1271 $(RCOPY) ..\lib $(INST_LIB)\$(NULL)
1272
1273$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1274 cd ..\lib\unicore && \
1275 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
1276
1277minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1278 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1279 if exist ..\t\perl.exe del /f ..\t\perl.exe
1280 rename ..\t\miniperl.exe perl.exe
1281 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1282 attrib -r "..\t\*.*"
1283 cd ..\t && \
1284 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
1285
1286test-prep : all utils ..\pod\perltoc.pod
1287 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1288 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1289 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1290# If building with gcc versions 4.x.x or greater, then
1291# the GCC helper DLL will also need copied to the test directory.
1292# The name of the dll can change, depending upon which vendor has supplied
1293# your compiler, and upon the values of "x".
1294# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1295# Without this copying, the op/taint.t test script will fail.
1296 if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
1297 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1298 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1299 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1300 if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
1301
1302test : test-prep
1303 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1304 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1305
1306test_porting : test-prep
1307 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1308 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
1309
1310test-reonly : reonly utils
1311 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1312 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1313 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1314 cd ..\t && \
1315 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1316 cd ..\win32
1317
1318regen :
1319 cd .. && regen.pl && cd win32
1320
1321test-notty : test-prep
1322 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1323 set PERL_SKIP_TTY_TEST=1 && \
1324 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1325
1326_test :
1327 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1328 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1329 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1330 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1331 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1332
1333_clean :
1334 -@erase miniperlmain$(o)
1335 -@erase $(MINIPERL)
1336 -@erase perlglob$(o)
1337 -@erase perlmain$(o)
1338 -@erase perlmainst$(o)
1339 -@erase config.w32
1340 -@erase /f config.h
1341 -@erase /f ..\git_version.h
1342 -@erase $(GLOBEXE)
1343 -@erase $(PERLEXE)
1344 -@erase $(WPERLEXE)
1345 -@erase $(PERLEXESTATIC)
1346 -@erase $(PERLSTATICLIB)
1347 -@erase $(PERLDLL)
1348 -@erase $(CORE_OBJ)
1349 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1350 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1351 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1352 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1353 -@erase $(UNIDATAFILES)
1354 -@erase $(WIN32_OBJ)
1355 -@erase $(DLL_OBJ)
1356 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1357 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1358 -@erase *.ilk
1359 -@erase *.pdb
1360 -@erase Extensions_static
1361
1362clean : Extensions_clean _clean
1363
1364realclean : Extensions_realclean _clean
1365
1366# Handy way to run perlbug -ok without having to install and run the
1367# installed perlbug. We don't re-run the tests here - we trust the user.
1368# Please *don't* use this unless all tests pass.
1369# If you want to report test failures, use "gmake nok" instead.
1370ok: utils
1371 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1372
1373okfile: utils
1374 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1375
1376nok: utils
1377 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1378
1379nokfile: utils
1380 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
Unnamed repository; edit this file 'description' to name the repository.