Commit | Line | Data |
---|---|---|
8ed6d636 VK |
1 | #! /bin/sh |
2 | ||
3 | # This file is used to create generic Makefile for cross-compile | |
4 | # (borrowed from Makefile.SH) | |
5 | # (now only small changes are done to establish cross-compilation) | |
6 | # miniperl removed from here, as this is built on HOST | |
7 | ||
8 | Makefile=Makefile-cross-$CROSS_NAME | |
9 | ||
10 | . Cross/config-${CROSS_NAME}.sh | |
11 | ||
12 | # H.Merijn Brand [17 Feb 2004] | |
13 | # This comment is just to ensure that Configure will find variables that | |
14 | # are removed/replaced in patches on blead, but are still needed in the | |
15 | # 5.8.x, 5.6.x and 5.005.x maintainance tracks. | |
16 | # metaconfig -m will scan all .SH files on this level (not deeper), and | |
17 | # not in x2p and other subfolders. This file is as good as any .SH | |
18 | # patch references | |
19 | # #22227 $baserev | |
20 | # #22302 $yacc $byacc | |
21 | ||
22 | # H.Merijn Brand [30 Oct 2004] | |
23 | # Mentioned for the same reason for future reference | |
24 | # #23434 $d_strlcat $d_strlcpy | |
25 | ||
26 | : This forces SH files to create target in same directory as SH file. | |
27 | : This is so that make depend always knows where to find SH derivatives. | |
28 | case "$0" in | |
29 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; | |
30 | esac | |
31 | ||
8ed6d636 VK |
32 | linklibperl='$(LIBPERL)' |
33 | shrpldflags='$(LDDLFLAGS)' | |
34 | ldlibpth='' | |
35 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' | |
36 | case "$useshrplib" in | |
37 | true) | |
38 | # Prefix all runs of 'miniperl' and 'perl' with | |
39 | # $ldlibpth so that ./perl finds *this* shared libperl. | |
40 | case "$LD_LIBRARY_PATH" in | |
41 | '') | |
42 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; | |
43 | *) | |
44 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; | |
45 | esac | |
46 | ||
47 | pldlflags="$cccdlflags" | |
3b333d01 | 48 | static_ldflags='' |
8ed6d636 VK |
49 | case "${osname}${osvers}" in |
50 | next4*) | |
51 | ld=libtool | |
52 | lddlflags="-dynamic -undefined warning -framework System \ | |
53 | -compatibility_version 1 -current_version $patchlevel \ | |
54 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" | |
55 | ;; | |
56 | rhapsody*|darwin*) | |
57 | shrpldflags="${ldflags} -dynamiclib \ | |
58 | -compatibility_version \ | |
59 | ${api_revision}.${api_version}.${api_subversion} \ | |
60 | -current_version \ | |
61 | ${revision}.${patchlevel}.${subversion} \ | |
62 | -install_name \$(shrpdir)/\$@" | |
63 | ;; | |
64 | cygwin*) | |
65 | linklibperl="-lperl" | |
66 | ;; | |
67 | sunos*) | |
68 | linklibperl="-lperl" | |
69 | ;; | |
70 | netbsd*|freebsd[234]*|openbsd*|dragonfly*) | |
71 | linklibperl="-L. -lperl" | |
72 | ;; | |
73 | interix*) | |
74 | linklibperl="-L. -lperl" | |
75 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" | |
76 | ;; | |
77 | linux*) | |
78 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
79 | ;; | |
80 | aix*) | |
81 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" | |
82 | case "$osvers" in | |
83 | 3*) shrpldflags="$shrpldflags -e _nostart" | |
84 | ;; | |
85 | *) shrpldflags="$shrpldflags -b noentry" | |
86 | ;; | |
87 | esac | |
88 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
89 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" | |
90 | ;; | |
91 | hpux*) | |
92 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" | |
93 | ;; | |
94 | os390*) | |
95 | shrpldflags='-W l,XPLINK,dll' | |
96 | linklibperl='libperl.x' | |
97 | DPERL_EXTERNAL_GLOB='' | |
98 | ;; | |
99 | esac | |
100 | case "$ldlibpthname" in | |
101 | '') ;; | |
102 | *) | |
103 | case "$osname" in | |
104 | os2) | |
105 | ldlibpth='' | |
106 | ;; | |
107 | *) | |
108 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" | |
109 | ;; | |
110 | esac | |
111 | # Strip off any trailing :'s | |
112 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` | |
113 | ;; | |
114 | esac | |
115 | ||
116 | case "$ldlibpth" in | |
117 | # Protect any spaces | |
118 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; | |
119 | esac | |
120 | ||
121 | case "$osname" in | |
122 | linux) | |
123 | # If there is a pre-existing $libperl from a previous | |
124 | # installation, Linux needs to use LD_PRELOAD to | |
125 | # override the LD_LIBRARY_PATH setting. See the | |
126 | # INSTALL file, under "Building a shared perl library". | |
127 | # If there is no pre-existing $libperl, we don't need | |
128 | # to do anything further. | |
129 | if test -f $archlib/CORE/$libperl; then | |
130 | rm -f preload | |
131 | cat <<'EOT' > preload | |
132 | #! /bin/sh | |
133 | lib=$1 | |
134 | shift | |
135 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" | |
136 | exec "$@" | |
137 | EOT | |
138 | chmod 755 preload | |
139 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" | |
140 | fi | |
141 | ;; | |
142 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" | |
143 | ;; | |
144 | esac | |
145 | ||
146 | ;; | |
147 | ||
148 | *) pldlflags='' | |
3b333d01 | 149 | static_ldflags='CCCDLFLAGS=' |
8ed6d636 VK |
150 | ;; |
151 | esac | |
152 | ||
153 | : Prepare dependency lists for Makefile. | |
154 | dynamic_list=' ' | |
155 | extra_dep='' | |
156 | for f in $dynamic_ext; do | |
157 | : the dependency named here will never exist | |
158 | base=`echo "$f" | sed 's/.*\///'` | |
159 | this_target="lib/auto/$f/$base.$dlext" | |
160 | dynamic_list="$dynamic_list $this_target" | |
161 | ||
162 | : Parallel makes reveal that we have some interdependencies | |
163 | case $f in | |
164 | Math/BigInt/FastCalc) extra_dep="$extra_dep | |
165 | $this_target: lib/auto/List/Util/Util.$dlext" ;; | |
166 | Unicode/Normalize) extra_dep="$extra_dep | |
167 | $this_target: uni.data" ;; | |
168 | esac | |
169 | done | |
170 | ||
171 | static_list=' ' | |
172 | for f in $static_ext; do | |
173 | base=`echo "$f" | sed 's/.*\///'` | |
174 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" | |
175 | done | |
176 | ||
177 | nonxs_list=' ' | |
178 | for f in $nonxs_ext; do | |
179 | base=`echo "$f" | sed 's/.*\///'` | |
180 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" | |
181 | done | |
182 | ||
183 | echo "Extracting $Makefile (with variable substitutions)" | |
184 | $spitshell >$Makefile <<!GROK!THIS! | |
185 | # $Makefile.SH | |
186 | # This file is derived from $Makefile.SH. Any changes made here will | |
187 | # be lost the next time you run Configure. | |
188 | # $Makefile is used to generate $firstmakefile. The only difference | |
189 | # is that $firstmakefile has the dependencies filled in at the end. | |
190 | ||
191 | CC = $cc | |
192 | LD = $ld | |
193 | ||
194 | LDFLAGS = $ldflags | |
195 | CLDFLAGS = $ldflags | |
196 | ||
197 | mallocsrc = $mallocsrc | |
198 | mallocobj = $mallocobj | |
199 | madlysrc = $madlysrc | |
200 | madlyobj = $madlyobj | |
201 | LNS = $lns | |
202 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? | |
203 | CPS = $cp | |
204 | RMS = rm -f | |
205 | ranlib = $ranlib | |
206 | ||
207 | # The following are mentioned only to make metaconfig include the | |
208 | # appropriate questions in Configure. If you want to change these, | |
209 | # edit config.sh instead, or specify --man1dir=/wherever on | |
210 | # installman commandline. | |
211 | bin = $installbin | |
212 | scriptdir = $scriptdir | |
213 | shrpdir = $archlibexp/CORE | |
214 | privlib = $installprivlib | |
215 | man1dir = $man1dir | |
216 | man1ext = $man1ext | |
217 | man3dir = $man3dir | |
218 | man3ext = $man3ext | |
219 | ||
220 | # The following are used to build and install shared libraries for | |
221 | # dynamic loading. | |
222 | LDDLFLAGS = $lddlflags | |
223 | SHRPLDFLAGS = $shrpldflags | |
224 | CCDLFLAGS = $ccdlflags | |
225 | DLSUFFIX = .$dlext | |
226 | PLDLFLAGS = $pldlflags | |
227 | LIBPERL = $libperl | |
228 | LLIBPERL= $linklibperl | |
229 | SHRPENV = $shrpenv | |
230 | ||
231 | # Static targets are ordinarily built without CCCDLFLAGS. However, | |
232 | # if building a shared libperl.so that might later be linked into | |
233 | # another application, then it might be appropriate to also build static | |
234 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC | |
3b333d01 NC |
235 | # for GNU cc). |
236 | STATIC_LDFLAGS = $static_ldflags | |
8ed6d636 VK |
237 | |
238 | # The following is used to include the current directory in | |
239 | # the dynamic loader path you are building a shared libperl. | |
240 | LDLIBPTH = $ldlibpth | |
241 | ||
242 | dynamic_ext = $dynamic_list | |
243 | static_ext = $static_list | |
244 | nonxs_ext = $nonxs_list | |
245 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) | |
246 | DYNALOADER = DynaLoader\$(OBJ_EXT) | |
247 | ||
248 | libs = $perllibs $cryptlib | |
249 | ||
cc69b689 | 250 | public = perl\$(EXE_EXT) utilities translators |
8ed6d636 VK |
251 | |
252 | shellflags = $shellflags | |
253 | ||
254 | # This is set to MAKE=$make if your $make command doesn't | |
255 | # do it for you. | |
256 | $make_set_make | |
257 | ||
258 | # Mention $gmake here so it gets probed for by Configure. | |
259 | ||
260 | # These variables may need to be manually set for non-Unix systems. | |
261 | AR = $full_ar | |
262 | EXE_EXT = $_exe | |
263 | LIB_EXT = $_a | |
264 | OBJ_EXT = $_o | |
265 | PATH_SEP = $p_ | |
266 | ||
267 | # If you're going to use valgrind and it can't be invoked as plain valgrind | |
268 | # then you'll need to change this, or override it on the make command line. | |
269 | VALGRIND=valgrind | |
270 | ||
271 | FIRSTMAKEFILE = $firstmakefile | |
272 | ||
273 | # Any special object files needed by this architecture, e.g. os2/os2.obj | |
274 | ARCHOBJS = $archobjs | |
275 | ||
276 | .SUFFIXES: .c \$(OBJ_EXT) .i .s | |
277 | ||
278 | # grrr | |
279 | SHELL = $sh | |
280 | ||
281 | # how to tr(anslate) newlines | |
282 | TRNL = '$trnl' | |
283 | ||
284 | OPTIMIZE = $optimize | |
285 | ||
286 | EXTRAS = $extras | |
287 | ||
288 | INSTALLPREFIXEXP = $prefix | |
289 | ||
290 | !GROK!THIS! | |
291 | # not used by Makefile but by installperl; | |
292 | # mentioned here so that metaconfig picks these up | |
293 | # $installusrbinperl | |
294 | # $versiononly | |
295 | ||
296 | case "${osname}:${osvers}" in | |
297 | darwin:*) | |
298 | $spitshell >>$Makefile <<EOF | |
299 | ||
300 | # Your locales are broken (osname $osname, osvers $osvers) | |
301 | # and to avoid the numerous | |
302 | # perl: warning: Setting locale failed. | |
303 | # warnings during the build process we reset the locale variables. | |
304 | ||
305 | LC_ALL=C | |
306 | LANG=C | |
307 | LANGUAGE=C | |
308 | EOF | |
309 | ;; | |
310 | esac | |
311 | ||
312 | $spitshell >>$Makefile <<!GROK!THIS! | |
313 | CROSS_NAME = ${CROSS_NAME} | |
314 | CROSS_LIB = xlib/${CROSS_NAME} | |
315 | ||
316 | CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` | |
317 | ||
318 | CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` | |
319 | ||
320 | !GROK!THIS! | |
321 | ||
322 | ## In the following dollars and backticks do not need the extra backslash. | |
323 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
324 | ||
608969de | 325 | CONFIGPM = xlib/$(CROSS_NAME)/Config.pm |
8ed6d636 VK |
326 | |
327 | private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod | |
328 | ||
329 | shextract = Makefile cflags config.h makeaperl makedepend \ | |
330 | makedir myconfig writemain pod/Makefile | |
331 | ||
332 | # Files to be built with variable substitution after miniperl is | |
333 | # available. Dependencies handled manually below (for now). | |
334 | ||
335 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ | |
336 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL | |
337 | ||
338 | # lib/lib.pm is not listed here because it has a rule of its own. | |
339 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ | |
340 | pod/pod2usage pod/podchecker pod/podselect | |
341 | ||
342 | addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct | |
343 | ||
344 | # Unicode data files generated by mktables | |
345 | unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \ | |
346 | lib/unicore/Properties lib/unicore/Decomposition.pl \ | |
347 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl | |
348 | ||
349 | # Directories of Unicode data files generated by mktables | |
350 | unidatadirs = lib/unicore/To lib/unicore/lib | |
351 | ||
352 | h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h | |
353 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h | |
354 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h | |
355 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h | |
356 | h5 = utf8.h warnings.h | |
357 | h = $(h1) $(h2) $(h3) $(h4) $(h5) | |
358 | ||
359 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c | |
360 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c | |
361 | c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c | |
362 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c | |
363 | c5 = $(madlysrc) $(mallocsrc) | |
364 | ||
365 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c | |
366 | ||
367 | obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) | |
368 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) | |
369 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) | |
370 | ||
371 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) | |
372 | ||
373 | lintflags = \ | |
374 | -b \ | |
375 | -n \ | |
376 | -p \ | |
377 | -Ncheck=%all \ | |
378 | -Nlevel=4 \ | |
379 | -errchk=parentheses \ | |
380 | -errhdr=%all \ | |
381 | -errfmt=src \ | |
382 | -errtags \ | |
383 | -erroff=E_ASSIGN_NARROW_CONV \ | |
384 | -erroff=E_BAD_PTR_CAST \ | |
385 | -erroff=E_BAD_PTR_CAST_ALIGN \ | |
386 | -erroff=E_BAD_PTR_INT_COMBINATION \ | |
387 | -erroff=E_BAD_SIGN_EXTEND \ | |
388 | -erroff=E_BLOCK_DECL_UNUSED \ | |
389 | -erroff=E_CASE_FALLTHRU \ | |
390 | -erroff=E_CONST_EXPR \ | |
391 | -erroff=E_CONSTANT_CONDITION \ | |
392 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ | |
393 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ | |
394 | -erroff=E_EXPR_NULL_EFFECT \ | |
395 | -erroff=E_FALSE_LOGICAL_EXPR \ | |
396 | -erroff=E_INCL_NUSD \ | |
397 | -erroff=E_LOOP_EMPTY \ | |
398 | -erroff=E_MAIN_PARAM \ | |
399 | -erroff=E_POINTER_TO_OBJECT \ | |
400 | -erroff=E_PTRDIFF_OVERFLOW \ | |
401 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ | |
402 | -erroff=E_STATIC_UNUSED \ | |
403 | -erroff=E_TRUE_LOGICAL_EXPR | |
404 | ||
405 | splintflags = \ | |
406 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ | |
407 | -D__builtin_va_list=va_list \ | |
408 | -Dsigjmp_buf=jmp_buf \ | |
409 | -warnposix \ | |
410 | \ | |
411 | +boolint \ | |
412 | +charintliteral \ | |
413 | -fixedformalarray \ | |
414 | -mustfreefresh \ | |
415 | -nestedextern \ | |
416 | -predboolint \ | |
417 | -predboolothers \ | |
418 | -preproc \ | |
419 | -boolops \ | |
420 | -shadow \ | |
421 | -nullstate \ | |
422 | +longintegral \ | |
423 | +matchanyintegral \ | |
424 | -type \ | |
425 | \ | |
426 | +line-len 999 \ | |
427 | +weak | |
428 | ||
429 | splintfiles = $(c1) | |
430 | ||
431 | .c$(OBJ_EXT): | |
432 | $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c | |
433 | ||
434 | .c.i: | |
435 | $(CCCMDSRC) -E $*.c > $*.i | |
436 | ||
437 | .c.s: | |
438 | $(CCCMDSRC) -S $*.c | |
439 | ||
440 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make | |
441 | @echo " "; | |
442 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." | |
443 | ||
444 | .PHONY: all | |
445 | ||
446 | ||
447 | # This is now done by installman only if you actually want the man pages. | |
448 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; | |
449 | ||
450 | # Phony target to force checking subdirectories. | |
451 | # Apparently some makes require an action for the FORCE target. | |
452 | .PHONY: FORCE | |
453 | FORCE: | |
454 | @sh -c true | |
455 | !NO!SUBS! | |
456 | $spitshell >>$Makefile <<!GROK!THIS! | |
457 | ||
458 | # We do a copy of the op.c instead of a symlink because gcc gets huffy | |
459 | # if we have a symlink forest to another disk (it complains about too many | |
460 | # levels of symbolic links, even if we have only two) | |
461 | ||
462 | opmini.c: op.c | |
463 | \$(RMS) opmini.c | |
464 | \$(CPS) op.c opmini.c | |
465 | ||
466 | opmini\$(OBJ_EXT): opmini.c | |
467 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c | |
468 | ||
469 | globals\$(OBJ_EXT): | |
470 | ||
471 | !GROK!THIS! | |
472 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
473 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h | |
474 | $(CCCMD) $(PLDLFLAGS) $*.c | |
475 | ||
476 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) | |
477 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c | |
478 | ||
479 | !NO!SUBS! | |
480 | case "$osname" in | |
481 | cygwin) | |
482 | ;; # Let cygwin/Makefile.SHs do its work. | |
483 | *) | |
484 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
485 | perlmain$(OBJ_EXT): perlmain.c | |
486 | $(CCCMD) $(PLDLFLAGS) $*.c | |
487 | ||
488 | !NO!SUBS! | |
489 | ;; | |
490 | esac | |
491 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
492 | # The file ext.libs is a list of libraries that must be linked in | |
493 | # for static extensions, e.g. -lm -lgdbm, etc. The individual | |
494 | # static extension Makefile's add to it. | |
495 | ext.libs: $(static_ext) | |
496 | -@test -f ext.libs || touch ext.libs | |
497 | ||
498 | !NO!SUBS! | |
499 | ||
500 | # How to build libperl. This is still rather convoluted. | |
501 | # Load up custom Makefile.SH fragment for shared loading and executables: | |
502 | case "$osname" in | |
503 | *) | |
504 | Makefile_s="$osname/Makefile.SHs" | |
505 | ;; | |
506 | esac | |
507 | ||
508 | case "$osname" in | |
509 | aix) | |
510 | $spitshell >>$Makefile <<!GROK!THIS! | |
511 | LIBS = $perllibs | |
512 | # In AIX we need to change this for building Perl itself from | |
513 | # its earlier definition (which is for building external | |
514 | # extensions *after* Perl has been built and installed) | |
515 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` | |
516 | ||
517 | !GROK!THIS! | |
518 | case "$useshrplib" in | |
519 | define|true|[yY]*) | |
520 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
521 | ||
522 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) | |
523 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) | |
524 | ||
525 | $(LIBPERL_NONSHR): $(obj) | |
526 | $(RMS) $(LIBPERL_NONSHR) | |
527 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) | |
528 | ||
529 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) | |
530 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ | |
531 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) | |
532 | ||
533 | MINIPERLEXP = $(MINIPERL_NONSHR) | |
534 | ||
535 | LIBPERLEXPORT = perl.exp | |
536 | ||
537 | !NO!SUBS! | |
538 | ||
539 | ;; | |
540 | *) | |
541 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
542 | MINIPERLEXP = miniperl$(EXE_EXT) | |
543 | ||
544 | PERLEXPORT = perl.exp | |
545 | ||
546 | !NO!SUBS! | |
547 | ;; | |
548 | esac | |
549 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
550 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) | |
551 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp | |
552 | ||
553 | !NO!SUBS! | |
554 | ;; | |
555 | os2) | |
556 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
557 | MINIPERLEXP = miniperl | |
558 | ||
559 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map | |
560 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def | |
561 | ||
562 | !NO!SUBS! | |
563 | ;; | |
564 | esac | |
565 | ||
566 | if test -r $Makefile_s ; then | |
567 | . $Makefile_s | |
568 | $spitshell >>$Makefile <<!GROK!THIS! | |
569 | ||
570 | $Makefile: $Makefile_s | |
571 | !GROK!THIS! | |
572 | else | |
573 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
574 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) | |
575 | !NO!SUBS! | |
576 | case "$useshrplib" in | |
577 | true) | |
578 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
579 | rm -f $@ | |
580 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) | |
581 | !NO!SUBS! | |
582 | case "$osname" in | |
583 | aix) | |
584 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
585 | rm -f libperl$(OBJ_EXT) | |
586 | mv $@ libperl$(OBJ_EXT) | |
587 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) | |
588 | !NO!SUBS! | |
589 | ;; | |
590 | esac | |
591 | ;; | |
592 | *) | |
593 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
594 | rm -f $(LIBPERL) | |
595 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) | |
596 | @$(ranlib) $(LIBPERL) | |
597 | !NO!SUBS! | |
598 | ;; | |
599 | esac | |
600 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
601 | ||
602 | # How to build executables. | |
603 | ||
604 | # The $& notation tells Sequent machines that it can do a parallel make, | |
605 | # and is harmless otherwise. | |
606 | # The miniperl -w -MExporter line is a basic cheap test to catch errors | |
607 | # before make goes on to run preplibrary and then MakeMaker on extensions. | |
608 | # This is very handy because later errors are often caused by miniperl | |
609 | # build problems but that's not obvious to the novice. | |
610 | # The Module used here must not depend on Config or any extensions. | |
611 | ||
612 | !NO!SUBS! | |
613 | ||
614 | ||
615 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
616 | ||
617 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
618 | -@rm -f miniperl.xok | |
619 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
620 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
621 | ||
622 | # Purify/Quantify Perls. | |
623 | ||
624 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
625 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
626 | ||
627 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
628 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
629 | ||
630 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
631 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
632 | ||
633 | # Valgrind perl (currently Linux only) | |
634 | ||
635 | perl.valgrind.config: config.sh | |
636 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
637 | @$(MAKE) perl.config.dashg | |
638 | @echo "Checking usemymalloc='n' in config.sh..." | |
639 | @grep "^usemymalloc=" config.sh | |
640 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
641 | @echo "And of course you have to have valgrind..." | |
642 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 | |
643 | ||
644 | # Third Degree Perl (Tru64 only) | |
645 | ||
646 | perl.config.dashg: | |
647 | @echo "Checking optimize='-g' in config.sh..." | |
648 | @grep "^optimize=" config.sh | |
649 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 | |
650 | ||
651 | perl.third.config: config.sh | |
652 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
653 | @$(MAKE) perl.config.dashg | |
654 | @echo "Checking usemymalloc='n' in config.sh..." | |
655 | @grep "^usemymalloc=" config.sh | |
656 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
657 | ||
658 | perl.third: /usr/bin/atom perl.third.config perl | |
659 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl | |
660 | @echo "Now you may run perl.third and then study perl.3log." | |
661 | ||
662 | # Pixie Perls (Tru64 and IRIX only) | |
663 | ||
664 | perl.pixie.config: config.sh | |
665 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." | |
666 | @$(MAKE) perl.config.dashg | |
667 | ||
668 | perl.pixie.atom: /usr/bin/atom perl | |
669 | atom -tool pixie -L. -all -toolargs="-quiet" perl | |
670 | ||
671 | perl.pixie.irix: perl | |
672 | pixie perl | |
673 | ||
674 | perl.pixie: /usr/bin/pixie perl.pixie.config perl | |
675 | if test -x /usr/bin/atom; then \ | |
676 | $(MAKE) perl.pixie.atom; \ | |
677 | else \ | |
678 | $(MAKE) perl.pixie.irix; \ | |
679 | fi | |
680 | @echo "Now you may run perl.pixie and then run pixie." | |
681 | ||
682 | # Gprof Perl | |
683 | ||
684 | perl.config.dashpg: | |
685 | @echo "Checking optimize='-pg' in config.sh..." | |
686 | @grep "^optimize=" config.sh | |
687 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 | |
688 | ||
689 | perl.gprof.config: config.sh | |
690 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." | |
691 | @$(MAKE) perl.config.dashpg | |
692 | ||
693 | perl.gprof: /usr/bin/gprof perl.gprof.config | |
694 | @-rm -f perl | |
695 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl | |
696 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." | |
697 | ||
698 | # Gcov Perl | |
699 | ||
700 | perl.config.gcov: | |
701 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." | |
702 | @echo "Checking gccversion in config.sh..." | |
703 | @grep "^gccversion=" config.sh | |
704 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 | |
705 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." | |
706 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." | |
707 | @grep "^ccflags=" config.sh | |
708 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 | |
709 | ||
710 | perl.gcov: perl.config.gcov | |
711 | @-rm -f perl | |
712 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl | |
713 | @echo "Now you may run perl.gcov and then run gcov some.c." | |
714 | ||
715 | # Microperl. This is just a convenience thing if one happens to | |
716 | # build also the full Perl and therefore the real big Makefile: | |
717 | # usually one should manually explicitly issue the below command. | |
718 | ||
719 | .PHONY: microperl | |
720 | microperl: | |
721 | $(MAKE) -f Makefile.micro | |
722 | ||
8ed6d636 VK |
723 | !NO!SUBS! |
724 | ||
725 | fi | |
726 | ||
727 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
728 | ||
8ed6d636 VK |
729 | # We have to call our ./makedir because Ultrix 4.3 make can't handle the line |
730 | # test -d lib/auto || mkdir lib/auto | |
731 | # We need to autosplit in two steps because VOS can't handle so many args | |
732 | # | |
733 | .PHONY: preplibrary | |
734 | preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) | |
735 | @sh ./makedir lib/auto | |
736 | @echo " AutoSplitting perl library" | |
737 | $(LDLIBPTH) ./miniperl -Ilib -MCross -e 'use AutoSplit; \ | |
738 | autosplit_lib_modules(@ARGV)' lib/*.pm | |
739 | $(LDLIBPTH) ./miniperl -Ilib -MCross -e 'use AutoSplit; \ | |
740 | autosplit_lib_modules(@ARGV)' lib/*/*.pm | |
741 | $(MAKE) lib/re.pm | |
742 | ||
743 | .PHONY: makeppport | |
744 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) | |
745 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport | |
746 | ||
747 | $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary | |
608969de VK |
748 | $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) |
749 | cp *.h $(CROSS_LIB)/ | |
750 | cp ext/re/re.pm $(LIBDIR)/ | |
751 | ||
752 | $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h | |
8ed6d636 VK |
753 | |
754 | lib/re.pm: ext/re/re.pm | |
755 | @-rm -f $@ | |
756 | cp ext/re/re.pm lib/re.pm | |
757 | ||
758 | $(plextract): miniperl $(CONFIGPM) x2p/s2p | |
759 | @-rm -f $@ | |
760 | $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL | |
761 | ||
762 | lib/lib.pm: miniperl $(CONFIGPM) | |
763 | @-rm -f $@ | |
764 | $(LDLIBPTH) ./miniperl -Ilib -MCross lib/lib_pm.PL | |
765 | ||
766 | unidatafiles $(unidatafiles): uni.data | |
767 | ||
768 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables | |
769 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w | |
770 | touch uni.data | |
771 | ||
772 | extra.pods: miniperl | |
773 | -@test ! -f extra.pods || rm -f `cat extra.pods` | |
774 | -@rm -f extra.pods | |
775 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ | |
776 | nx=`echo $$x | sed -e "s/README\.//"`; \ | |
777 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ | |
778 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ | |
779 | done | |
780 | -@rm -f pod/perlvms.pod | |
781 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods | |
782 | -@rm -f pod/perldelta.pod | |
4d7c7898 | 783 | -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc |
8ed6d636 VK |
784 | |
785 | extras.make: perl$(EXE_EXT) | |
786 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` | |
787 | ||
788 | extras.test: perl$(EXE_EXT) | |
789 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` | |
790 | ||
791 | extras.install: perl$(EXE_EXT) | |
792 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` | |
793 | ||
794 | .PHONY: install install-strip install-all install-verbose install-silent \ | |
795 | no-install install.perl install.man install.html | |
796 | ||
797 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm | |
798 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta | |
799 | ||
800 | install-strip: | |
801 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" | |
802 | ||
803 | install install-all: | |
804 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" | |
805 | ||
806 | install-verbose: | |
807 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" | |
808 | ||
809 | install-silent: | |
810 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" | |
811 | ||
812 | no-install: | |
813 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" | |
814 | ||
815 | # Set this to an empty string to avoid an attempt of rebuild before install | |
816 | INSTALL_DEPENDENCE = all | |
817 | ||
818 | install.perl: $(INSTALL_DEPENDENCE) installperl | |
819 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) | |
820 | -@test ! -s extras.lst || $(MAKE) extras.install | |
821 | ||
822 | install.man: all installman | |
823 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) | |
824 | ||
825 | # XXX Experimental. Hardwired values, but useful for testing. | |
826 | # Eventually Configure could ask for some of these values. | |
827 | install.html: all installhtml | |
828 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. | |
829 | $(LDLIBPTH) ./perl installhtml \ | |
830 | --podroot=. --podpath=. --recurse \ | |
831 | --htmldir=$(privlib)/html \ | |
832 | --htmlroot=$(privlib)/html \ | |
833 | --splithead=pod/perlipc \ | |
834 | --splititem=pod/perlfunc \ | |
835 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ | |
836 | --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \ | |
837 | --verbose | |
838 | ||
839 | ||
840 | # I now supply perly.c with the kits, so the following section is | |
841 | # used only if you force bison to run by saying | |
842 | # make regen_perly | |
843 | # You normally shouldn't remake perly.[ch]. | |
844 | ||
845 | .PHONY: regen_perly | |
846 | ||
847 | run_byacc: | |
848 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" | |
849 | ||
850 | # this outputs perly.h, perly.act and perly.tab | |
851 | regen_perly: | |
852 | perl regen_perly.pl | |
853 | ||
854 | # We don't want to regenerate perly.c and perly.h, but they might | |
855 | # appear out-of-date after a patch is applied or a new distribution is | |
856 | # made. | |
857 | perly.c: perly.y | |
858 | -@sh -c true | |
859 | ||
860 | perly.h: perly.y | |
861 | -@sh -c true | |
862 | ||
863 | # No compat3.sym here since and including the 5.004_50. | |
864 | # No interp.sym since 5.005_03. | |
865 | SYM = global.sym globvar.sym perlio.sym pp.sym | |
866 | ||
867 | SYMH = perlvars.h intrpvar.h | |
868 | ||
869 | CHMOD_W = chmod +w | |
870 | ||
871 | # The following files are generated automatically | |
872 | # autodoc.pl: pod/perlapi.pod pod/perlintern.pod | |
873 | # embed.pl: proto.h embed.h embedvar.h global.sym | |
874 | # perlapi.h perlapi.c | |
875 | # [* embed.pl needs pp.sym generated by opcode.pl! *] | |
876 | # keywords.pl: keywords.h | |
877 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym | |
878 | # regcomp.pl: regnodes.h | |
879 | # warnings.pl: warnings.h lib/warnings.pm | |
880 | # The correct versions should be already supplied with the perl kit, | |
881 | # in case you don't have perl available. | |
882 | # To force them to be regenerated, run | |
883 | # perl regen.pl | |
884 | # with your existing copy of perl | |
885 | # (make regen_headers is kept for backwards compatibility) | |
886 | ||
887 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ | |
888 | embed.h embedvar.h global.sym \ | |
889 | pod/perlintern.pod pod/perlapi.pod \ | |
890 | perlapi.h perlapi.c regnodes.h \ | |
891 | warnings.h lib/warnings.pm | |
892 | ||
893 | .PHONY: regen_headers regen_pods regen_all | |
894 | ||
895 | regen regen_headers: FORCE | |
896 | -perl regen.pl | |
897 | ||
898 | regen_pods: FORCE | |
899 | -cd pod; $(LDLIBPTH) $(MAKE) regen_pods | |
900 | ||
901 | regen_all: regen regen_pods | |
902 | ||
903 | .PHONY: manisort manicheck | |
904 | ||
905 | manisort: FORCE | |
906 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ | |
907 | LC_ALL=C sort -fdo MANIFEST MANIFEST) | |
908 | ||
909 | manicheck: FORCE | |
910 | perl Porting/manicheck | |
911 | ||
912 | # Extensions: | |
913 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will | |
914 | # automatically get built. There should ordinarily be no need to change | |
915 | # any of this part of makefile. | |
916 | # | |
917 | # The dummy dependency is a place holder in case $(dynamic_ext) or | |
918 | # $(static_ext) is empty. | |
919 | # | |
920 | # DynaLoader may be needed for extensions that use Makefile.PL. | |
921 | ||
922 | ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) | |
923 | ### if not exist $(AUTODIR) mkdir $(AUTODIR) | |
924 | ### cd $(EXTDIR)\$(*B) | |
925 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL | |
926 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL | |
927 | ### cd ..\..\win32 | |
928 | ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) | |
929 | ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) | |
930 | ### cd $(EXTDIR)\$(*B) | |
931 | ### $(XSUBPP) dl_win32.xs > $(*B).c | |
932 | ### cd ..\..\win32 | |
933 | ### | |
934 | ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs | |
935 | ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs | |
936 | ||
937 | ||
938 | ||
939 | $(DYNALOADER): preplibrary FORCE | |
3b333d01 | 940 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 VK |
941 | |
942 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
3b333d01 | 943 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
8ed6d636 VK |
944 | |
945 | s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
3b333d01 | 946 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 VK |
947 | |
948 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE | |
3b333d01 | 949 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
8ed6d636 VK |
950 | !NO!SUBS! |
951 | ||
952 | $spitshell >>$Makefile <<EOF | |
953 | $extra_dep | |
954 | EOF | |
955 | ||
956 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
957 | ||
958 | .PHONY: printconfig | |
959 | printconfig: | |
960 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) | |
961 | ||
962 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ | |
963 | realclean _realcleaner clobber _clobber \ | |
964 | distclean veryclean _verycleaner \ | |
965 | cleanup_unpacked_files unpack_files | |
966 | ||
967 | clean: cleanup_unpacked_files _tidy _mopup | |
968 | ||
969 | realclean: cleanup_unpacked_files _realcleaner _mopup | |
970 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" | |
971 | ||
972 | _clobber: | |
973 | -@rm -f Cross/run-* Cross/to-* Cross/from-* | |
974 | rm -f config.sh cppstdin Policy.sh extras.lst | |
975 | ||
976 | clobber: cleanup_unpacked_files _realcleaner _mopup _clobber | |
977 | ||
978 | distclean: clobber | |
979 | ||
980 | # Like distclean but also removes emacs backups and *.orig. | |
981 | veryclean: _verycleaner _mopup _clobber | |
982 | -@rm -f Obsolete Wanted | |
983 | ||
984 | # Do not 'make _mopup' directly. | |
985 | _mopup: | |
986 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) | |
987 | -rmdir .depending | |
988 | -@test -f extra.pods && rm -f `cat extra.pods` | |
989 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod | |
990 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o | |
991 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def | |
992 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap | |
993 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log | |
994 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs | |
995 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok | |
ce0286c6 | 996 | -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
cc69b689 | 997 | -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl |
8ed6d636 VK |
998 | -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old |
999 | -rm -f config.over | |
1000 | ||
1001 | # Do not 'make _tidy' directly. | |
1002 | _tidy: | |
1003 | -cd pod; $(LDLIBPTH) $(MAKE) clean | |
1004 | -cd utils; $(LDLIBPTH) $(MAKE) clean | |
1005 | -cd x2p; $(LDLIBPTH) $(MAKE) clean | |
1006 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
3b333d01 | 1007 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ |
8ed6d636 VK |
1008 | done |
1009 | ||
1010 | _cleaner1: | |
1011 | -cd os2; rm -f Makefile | |
1012 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
1013 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
1014 | -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
3b333d01 NC |
1015 | -@if test -f miniperl$(EXE_EXT) ; then \ |
1016 | for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
1017 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ | |
1018 | done ; \ | |
1019 | else \ | |
1020 | sh $(CLEAN).sh ; \ | |
1021 | fi | |
1022 | rm -f realclean.sh veryclean.sh | |
8ed6d636 VK |
1023 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean |
1024 | ||
1025 | # Some systems do not support "?", so keep these files separate. | |
1026 | _cleaner2: | |
1027 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c | |
1028 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* | |
1029 | rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests | |
1030 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) | |
1031 | rm -rf $(addedbyconf) | |
1032 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old | |
1033 | rm -f $(private) | |
1034 | rm -rf $(unidatafiles) $(unidatadirs) | |
1035 | rm -rf lib/auto | |
1036 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists | |
1037 | rm -f h2ph.man pstruct | |
1038 | rm -rf .config | |
1039 | rm -f preload | |
1040 | rm -rf lib/Encode lib/Compress lib/Hash lib/re | |
1041 | rm -rf lib/IO/Compress lib/IO/Uncompress | |
1042 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c | |
1043 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) | |
1044 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) | |
1045 | -rmdir lib/B lib/Data | |
1046 | -rmdir lib/Filter/Util lib/IO/Socket | |
1047 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys | |
1048 | -rmdir lib/threads lib/XS | |
1049 | ||
1050 | _realcleaner: | |
1051 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean | |
1052 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1053 | ||
1054 | _verycleaner: | |
1055 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean | |
1056 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1057 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig | |
1058 | ||
1059 | .PHONY: lint | |
1060 | lint: $(c) | |
1061 | rm -f *.ln | |
1062 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) | |
1063 | ||
1064 | .PHONY: splint | |
1065 | splint: $(c) | |
1066 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) | |
1067 | ||
1068 | # Need to unset during recursion to go out of loop. | |
1069 | # The README below ensures that the dependency list is never empty and | |
1070 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. | |
1071 | ||
1072 | MAKEDEPEND = Makefile makedepend | |
1073 | ||
1074 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) | |
1075 | $(MAKE) depend MAKEDEPEND= | |
1076 | ||
1077 | config.h: config_h.SH config.sh | |
1078 | $(SHELL) config_h.SH | |
1079 | # TODO - improve following line | |
1080 | cp config.h $(CROSS_LIB)/ | |
1081 | ||
1082 | xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh | |
1083 | CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH | |
608969de | 1084 | #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
8ed6d636 | 1085 | cp xconfig.h $(CROSS_LIB)/ |
608969de | 1086 | cp xconfig.h $(CROSS_LIB)/config.h |
8ed6d636 VK |
1087 | |
1088 | # When done, touch perlmain.c so that it doesn't get remade each time. | |
1089 | .PHONY: depend | |
1090 | depend: makedepend | |
1091 | sh ./makedepend MAKE=$(MAKE) | |
1092 | - test -s perlmain.c && touch perlmain.c | |
1093 | cd x2p; $(MAKE) depend | |
1094 | ||
1095 | # Cannot postpone this until $firstmakefile is ready ;-) | |
1096 | makedepend: makedepend.SH config.sh | |
1097 | sh ./makedepend.SH | |
1098 | ||
1099 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ | |
1100 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ | |
1101 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ | |
1102 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ | |
1103 | test.third check.third utest.third ucheck.third test_notty.third \ | |
1104 | test.deparse test_notty.deparse test_harness test_harness_notty \ | |
1105 | minitest coretest test.taintwarn | |
1106 | ||
1107 | # Cannot delegate rebuilding of t/perl to make | |
1108 | # to allow interlaced test and minitest | |
1109 | ||
1110 | TESTFILE=TEST | |
1111 | ||
1112 | _test_prep: unpack_files | |
1113 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) | |
1114 | ||
1115 | # Architecture-neutral stuff: | |
1116 | ||
1117 | test_prep_pre: preplibrary utilities $(nonxs_ext) | |
1118 | ||
1119 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) | |
1120 | PERL=./perl $(MAKE) _test_prep | |
1121 | ||
1122 | _test_tty: | |
1123 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty | |
1124 | ||
1125 | _test_notty: | |
1126 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) | |
1127 | ||
1128 | unpack_files: | |
1129 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m | |
1130 | ||
1131 | cleanup_unpacked_files: | |
1132 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c | |
1133 | ||
1134 | # The second branch is for testing without a tty or controlling terminal, | |
1135 | # see t/op/stat.t | |
1136 | _test: | |
1137 | if (true </dev/tty) >/dev/null 2>&1; then \ | |
1138 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ | |
1139 | else \ | |
1140 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ | |
1141 | fi | |
1142 | @echo "Ran tests" > t/rantests | |
1143 | ||
1144 | test check: test_prep | |
1145 | PERL=./perl $(MAKE) _test | |
1146 | ||
1147 | test_tty: test_prep | |
1148 | PERL=./perl $(MAKE) _test_tty | |
1149 | ||
1150 | test_notty: test_prep | |
1151 | PERL=./perl $(MAKE) _test_notty | |
1152 | ||
1153 | utest ucheck test.utf8 check.utf8: test_prep | |
1154 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test | |
1155 | ||
1156 | coretest: test_prep | |
1157 | PERL=./perl TEST_ARGS=-core $(MAKE) _test | |
1158 | ||
1159 | test-prep: test_prep | |
1160 | ||
1161 | test-tty: test_tty | |
1162 | ||
1163 | test-notty: test_notty | |
1164 | ||
1165 | # Torture testing | |
1166 | ||
1167 | test.torture torturetest: test_prep | |
1168 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test | |
1169 | ||
1170 | # Targets for UTF16 testing: | |
1171 | ||
1172 | minitest.utf16: minitest.prep | |
1173 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
1174 | && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
1175 | ||
1176 | test.utf16 check.utf16: test_prep | |
1177 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test | |
1178 | ||
1179 | utest.utf16 ucheck.utf16: test_prep | |
1180 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test | |
1181 | ||
1182 | # Targets for valgrind testing: | |
1183 | ||
1184 | test_prep.valgrind: test_prep perl.valgrind | |
1185 | PERL=./perl $(MAKE) _test_prep | |
1186 | ||
1187 | test.valgrind check.valgrind: test_prep perl.valgrind.config | |
1188 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test | |
1189 | ||
1190 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config | |
1191 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1192 | ||
1193 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config | |
1194 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty | |
1195 | ||
1196 | # Targets for Third Degree testing. | |
1197 | ||
1198 | test_prep.third: test_prep perl.third | |
1199 | PERL=./perl.third $(MAKE) _test_prep | |
1200 | ||
1201 | test.third check.third: test_prep.third perl.third | |
1202 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test | |
1203 | ||
1204 | utest.third ucheck.third: test_prep.third perl.third | |
1205 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1206 | ||
1207 | test_notty.third: test_prep.third perl.third | |
1208 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty | |
1209 | ||
1210 | # Targets for Deparse testing. | |
1211 | ||
1212 | test.deparse: test_prep | |
1213 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test | |
1214 | ||
1215 | test_notty.deparse: test_prep | |
1216 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty | |
1217 | ||
1218 | # Targets to run the test suite with -t | |
1219 | ||
1220 | test.taintwarn: test_prep | |
1221 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test | |
1222 | ||
1223 | minitest.prep: | |
1224 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ | |
1225 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) | |
1226 | @echo " " | |
1227 | @echo "You may see some irrelevant test failures if you have been unable" | |
1228 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." | |
1229 | @echo " " | |
1230 | ||
1231 | # Can't depend on lib/Config.pm because that might be where miniperl | |
1232 | # is crashing. | |
1233 | minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep | |
1234 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
1235 | && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
1236 | ||
1237 | # Test via harness | |
1238 | ||
1239 | test_harness: test_prep | |
1240 | PERL=./perl $(MAKE) TESTFILE=harness _test | |
1241 | ||
1242 | test_harness_notty: test_prep | |
1243 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test | |
1244 | ||
1245 | # Handy way to run perlbug -ok without having to install and run the | |
1246 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
1247 | # Please *don't* use this unless all tests pass. | |
1248 | # If you want to report test failures, use "make nok" instead. | |
1249 | ||
1250 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack | |
1251 | ||
1252 | ok: utilities | |
1253 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' | |
1254 | ||
1255 | okfile: utilities | |
1256 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok | |
1257 | ||
1258 | oknack: utilities | |
1259 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A | |
1260 | ||
1261 | okfilenack: utilities | |
1262 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A | |
1263 | ||
1264 | nok: utilities | |
1265 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' | |
1266 | ||
1267 | nokfile: utilities | |
1268 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok | |
1269 | ||
1270 | noknack: utilities | |
1271 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A | |
1272 | ||
1273 | nokfilenack: utilities | |
1274 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A | |
1275 | ||
1276 | .PHONY: clist hlist shlist pllist | |
1277 | ||
1278 | clist: $(c) | |
1279 | echo $(c) | tr ' ' $(TRNL) >.clist | |
1280 | ||
1281 | hlist: $(h) | |
1282 | echo $(h) | tr ' ' $(TRNL) >.hlist | |
1283 | ||
1284 | shlist: $(sh) | |
1285 | echo $(sh) | tr ' ' $(TRNL) >.shlist | |
1286 | ||
1287 | pllist: $(pl) | |
1288 | echo $(pl) | tr ' ' $(TRNL) >.pllist | |
1289 | ||
1290 | Makefile: Makefile.SH ./config.sh | |
1291 | $(SHELL) Makefile.SH | |
1292 | ||
1293 | .PHONY: distcheck | |
1294 | distcheck: FORCE | |
1295 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' | |
1296 | ||
1297 | .PHONY: elc | |
1298 | elc: emacs/cperl-mode.elc | |
1299 | ||
1300 | emacs/cperl-mode.elc: emacs/cperl-mode.el | |
1301 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el | |
1302 | ||
1303 | .PHONY: etags ctags tags | |
1304 | ||
1305 | etags: TAGS | |
1306 | ||
1307 | TAGS: emacs/cperl-mode.elc | |
1308 | sh emacs/ptags | |
1309 | ||
1310 | # Let's hope make will not go into an infinite loop on case-unsensitive systems | |
1311 | # This may also fail if . is in the head of the path, since perl will | |
1312 | # require -Ilib | |
1313 | tags: TAGS | |
1314 | perl emacs/e2ctags.pl TAGS > tags | |
1315 | ||
1316 | ctags: | |
1317 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h | |
1318 | ||
1319 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE | |
1320 | # If this runs make out of memory, delete /usr/include lines. | |
1321 | !NO!SUBS! | |
1322 | ||
1323 | $eunicefix $Makefile | |
1324 | case `pwd` in | |
1325 | *SH) | |
1326 | $rm -f ../$Makefile | |
1327 | $ln $Makefile ../$Makefile | |
1328 | ;; | |
1329 | esac | |
1330 | $rm -f $firstmakefile | |
1331 | ||
1332 | # Now do any special processing required before building. | |
1333 | ||
1334 | case "$ebcdic" in | |
1335 | define) | |
1336 | xxx='' | |
1337 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 | |
1338 | case "$osname" in | |
1339 | os390|posix-bc) | |
1340 | if cd x2p | |
1341 | then | |
1342 | rm -f y.tab.c y.tab.h | |
1343 | case "$osname" in | |
1344 | posix-bc) | |
1345 | # we are using two different yaccs in BS2000 Posix! | |
1346 | byacc a2p.y >/dev/null 2>&1 | |
1347 | ;; | |
1348 | *) # e.g. os390 | |
1349 | yacc a2p.y >/dev/null 2>&1 | |
1350 | ;; | |
1351 | esac | |
1352 | if cmp -s y.tab.c a2p.c | |
1353 | then | |
1354 | rm -f y.tab.c | |
1355 | else | |
1356 | echo "a2p.y -> a2p.c" >&2 | |
1357 | mv -f y.tab.c a2p.c | |
1358 | chmod u+w a2p.c | |
1359 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ | |
1360 | -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ | |
1361 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c | |
1362 | xxx="$xxx a2p.c" | |
1363 | fi | |
1364 | # In case somebody yacc -d:ed the a2p.y. | |
1365 | if test -f y.tab.h | |
1366 | then | |
1367 | if cmp -s y.tab.h a2p.h | |
1368 | then | |
1369 | rm -f y.tab.h | |
1370 | else | |
1371 | echo "a2p.h -> a2p.h" >&2 | |
1372 | mv -f y.tab.h a2p.h | |
1373 | xxx="$xxx a2p.h" | |
1374 | fi | |
1375 | fi | |
1376 | cd .. | |
1377 | fi | |
1378 | ;; | |
1379 | vmesa) | |
1380 | # Do nothing in VM/ESA. | |
1381 | ;; | |
1382 | *) | |
1383 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 | |
1384 | ;; | |
1385 | esac | |
1386 | case "$xxx" in | |
1387 | '') echo "No parser files were regenerated. That's okay." >&2 ;; | |
1388 | esac | |
1389 | ;; | |
1390 | esac | |
1391 | ||
1392 | # ex: set ts=8 sts=4 sw=4 noet: |