Commit | Line | Data |
---|---|---|
a5b1c163 RW |
1 | # |
2 | # Makefile to build perl on Windows NT 64 Bit using Microsoft NMAKE. | |
3 | # | |
4 | # Building for Itanium requires the latest SDK, a (currently unsupported) | |
5 | # native Microsoft IA64 Compiler (13.00.9367.7 for IA-64 or higher), and | |
6 | # of course an Itanium box running Windows XP. | |
7 | # Quick start: | |
8 | # 1) Edit INST_TOP and INST_DRV in this Makefile if necessary. | |
9 | # 2) nmake -f Makefile.win64 | |
10 | # 3) nmake -f Makefile.win64 test | |
11 | # => Currently lib/posix.t 2 and op/64bitint.t 23, 53-55 will fail | |
12 | # 4) nmake -f Makefile.win64 install | |
13 | # | |
14 | # This Configuration eanbles 64 Bit porting warning (/Wp64). Watch out for C4700 | |
15 | # warnings when porting addon modules to WIN64, most of them will result in runtime | |
16 | # crashes. Remember that most data types remain unchanged on WIN64. Especially long | |
17 | # is still 32 Bit. Native 64 Bit datatypes are for example __int64 or size_t. If | |
18 | # you really need to add WIN64 specific code use ifdef _WIN64. | |
19 | # | |
20 | # randolf.werner@sap.com | |
21 | ||
22 | ## | |
23 | ## Make sure you read README.win32 *before* you mess with anything here! | |
24 | ## | |
25 | ## If you want a configuration that is the same as ActivePerl (see | |
26 | ## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below! | |
27 | ## | |
28 | ||
29 | ## | |
30 | ## Build configuration. Edit the values below to suit your needs. | |
31 | ## | |
32 | ||
33 | # | |
34 | # Set these to wherever you want "nmake install" to put your newly | |
35 | # built perl. Setting it to a path with spaces is NOT recommended. | |
36 | # | |
37 | INST_DRV = c: | |
38 | INST_TOP = $(INST_DRV)\perl64 | |
39 | ||
40 | # | |
41 | # uncomment one of the following lines if you are using either | |
42 | # Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_ | |
43 | # service pack 3 applied. | |
44 | # | |
45 | # If you have 5.x SP3 or later, or 6.x, no change is required. | |
46 | # | |
47 | #CCTYPE = MSVC20 | |
48 | #CCTYPE = MSVC_PRE_50SP3 | |
49 | ||
50 | # | |
51 | # set the install locations of the compiler include/libraries. Running | |
52 | # VCVARS32.BAT is *required* when using Visual C. Some versions of | |
53 | # Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment. | |
54 | # If such is the case you may have to set CCHOME explicitly. Spaces in | |
55 | # the path name should not be quoted. | |
56 | # | |
57 | # If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults | |
58 | # should just work. | |
59 | # | |
60 | #CCHOME = f:\msvc20 | |
61 | CCHOME = $(MSVCDIR) | |
62 | CCINCDIR = $(CCHOME)\include | |
63 | CCLIBDIR = $(CCHOME)\lib | |
64 | ||
65 | # | |
66 | # if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure | |
67 | # the file exists (see README.win32). File should be located in the same | |
68 | # directory as this makefile. | |
69 | # | |
70 | # If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a | |
71 | # library, uncomment CRYPT_LIB, and make sure the library exists (see | |
72 | # README.win32). Specify the full pathname of the library. | |
73 | # | |
74 | # If you don't enable one of these, the crypt() builtin will fail to work. | |
75 | # (Generally not critical.) | |
76 | # | |
77 | #CRYPT_SRC = fcrypt.c | |
78 | #CRYPT_LIB = fcrypt.lib | |
79 | ||
80 | # | |
81 | # uncomment this option if you want to bulk-enable all the options that | |
82 | # ActiveState uses to build their ActivePerl distribution. If you set this, | |
83 | # there should be no need to set any of the other options that follow. | |
84 | # | |
85 | # If you don't enable this, the defaults below will get you the most | |
86 | # efficient perl configuration possible that will also be compatible | |
87 | # with the build defaults used on Unix platforms. On the other hand, | |
88 | # the ActivePerl configuration will get you fork() emulation at the | |
89 | # cost of some added bloat. | |
90 | # | |
91 | #BUILD_FLAVOR = ActivePerl | |
92 | ||
93 | # | |
94 | # uncomment next line if you want debug version of perl (big and slow). | |
95 | # If not enabled, we automatically try to use maximum optimization | |
96 | # with all compilers that are known to have a working optimizer. | |
97 | # | |
98 | #CFG = Debug | |
99 | ||
100 | # | |
101 | # Comment this out if you DON'T want your perl installation to be versioned. | |
102 | # This means that the new installation will overwrite any files from the | |
103 | # old installation at the same INST_TOP location. Leaving it enabled is | |
104 | # the safest route, as perl adds the extra version directory to all the | |
105 | # locations it installs files to. If you disable it, an alternative | |
106 | # versioned installation can be obtained by setting INST_TOP above to a | |
107 | # path that includes an arbitrary version string. | |
108 | # | |
109 | INST_VER = \5.6.1 | |
110 | ||
111 | # | |
112 | # Comment this out if you DON'T want your perl installation to have | |
113 | # architecture specific components. This means that architecture- | |
114 | # specific files will be installed along with the architecture-neutral | |
115 | # files. Leaving it enabled is safer and more flexible, in case you | |
116 | # want to build multiple flavors of perl and install them together in | |
117 | # the same location. Commenting it out gives you a simpler | |
118 | # installation that is easier to understand for beginners. | |
119 | # | |
120 | INST_ARCH = \$(ARCHNAME) | |
121 | ||
122 | # | |
123 | # uncomment to enable multiple interpreters. This is need for fork() | |
124 | # emulation. | |
125 | # | |
126 | #USE_MULTI = define | |
127 | ||
128 | # | |
129 | # Beginnings of interpreter cloning/threads; still very incomplete. | |
130 | # This should be enabled to get the fork() emulation. This needs | |
131 | # USE_MULTI as well. | |
132 | # | |
133 | #USE_ITHREADS = define | |
134 | ||
135 | # | |
136 | # uncomment to enable the implicit "host" layer for all system calls | |
137 | # made by perl. This needs USE_MULTI above. This is also needed to | |
138 | # get fork(). | |
139 | # | |
140 | #USE_IMP_SYS = define | |
141 | ||
142 | # | |
143 | # WARNING! This option is deprecated and will eventually go away (enable | |
144 | # USE_ITHREADS instead). | |
145 | # | |
146 | # uncomment to enable threads-capabilities. This is incompatible with | |
147 | # USE_ITHREADS, and is only here for people who may have come to rely | |
148 | # on the experimental Thread support that was in 5.005. | |
149 | # | |
150 | #USE_5005THREADS= define | |
151 | ||
152 | # | |
153 | # WARNING! This option is deprecated and will eventually go away (enable | |
154 | # USE_MULTI instead). | |
155 | # | |
156 | # uncomment next line if you want to use the PERL_OBJECT build option. | |
157 | # DO NOT ENABLE unless you have legacy code that relies on the C++ | |
158 | # CPerlObj class that was available in 5.005. This cannot be enabled | |
159 | # if you ask for USE_5005THREADS or USE_MULTI above. | |
160 | # | |
161 | #USE_OBJECT = define | |
162 | ||
163 | # | |
164 | # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. | |
165 | # It has patches that fix known bugs in older versions of MSVCRT.DLL. | |
166 | # This currently requires VC 5.0 with Service Pack 3 or later. | |
167 | # Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ | |
168 | # and follow the directions in the package to install. | |
169 | # | |
170 | # Not recommended if you have VC 6.x and you're not running Windows 9x. | |
171 | # | |
172 | #USE_PERLCRT = define | |
173 | ||
174 | # | |
175 | # uncomment to enable linking with setargv.obj under the Visual C | |
176 | # compiler. Setting this option enables perl to expand wildcards in | |
177 | # arguments, but it may be harder to use alternate methods like | |
178 | # File::DosGlob that are more powerful, or use perl inside shells | |
179 | # that do the expansion for you. This option is supported only | |
180 | # with Visual C. | |
181 | # | |
182 | #USE_SETARGV = define | |
183 | ||
184 | # | |
185 | # set this if you wish to use perl's malloc | |
186 | # WARNING: Turning this on/off WILL break binary compatibility with extensions | |
187 | # you may have compiled with/without it. Be prepared to recompile all | |
188 | # extensions if you change the default. Currently, this cannot be enabled | |
189 | # if you ask for USE_IMP_SYS above. | |
190 | # | |
191 | #PERL_MALLOC = define | |
192 | ||
193 | # | |
194 | # Additional compiler flags can be specified here. | |
195 | # | |
196 | ||
197 | # | |
198 | # This should normally be disabled. Adding -DPERL_POLLUTE enables support | |
199 | # for old symbols by default, at the expense of extreme pollution. You most | |
200 | # probably just want to build modules that won't compile with | |
201 | # perl Makefile.PL POLLUTE=1 | |
202 | # instead of enabling this. Please report such modules to the respective | |
203 | # authors. | |
204 | # | |
205 | #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE | |
206 | ||
207 | # | |
208 | # This should normally be disabled. Enabling it will disable the File::Glob | |
209 | # implementation of CORE::glob. | |
210 | # | |
211 | #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB | |
212 | ||
213 | # | |
214 | # This should normally be disabled. Enabling it causes perl to read scripts | |
215 | # in text mode (which is the 5.005 behavior) and will break ByteLoader. | |
216 | #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS | |
217 | ||
218 | # | |
219 | # specify semicolon-separated list of extra directories that modules will | |
220 | # look for libraries (spaces in path names need not be quoted) | |
221 | # | |
222 | EXTRALIBDIRS = | |
223 | ||
224 | # | |
225 | # set this to your email address (perl will guess a value from | |
226 | # from your loginname and your hostname, which may not be right) | |
227 | # | |
228 | #EMAIL = | |
229 | ||
230 | ## | |
231 | ## Build configuration ends. | |
232 | ## | |
233 | ||
234 | ##################### CHANGE THESE ONLY IF YOU MUST ##################### | |
235 | ||
236 | !IF "$(BUILD_FLAVOR)" == "ActivePerl" | |
237 | INST_VER = | |
238 | INST_ARCH = | |
239 | USE_MULTI = define | |
240 | USE_ITHREADS = define | |
241 | USE_IMP_SYS = define | |
242 | USE_5005THREADS = undef | |
243 | USE_OBJECT = undef | |
244 | USE_PERLCRT = undef | |
245 | USE_SETARGV = | |
246 | PERL_MALLOC = undef | |
247 | !ENDIF | |
248 | ||
249 | !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" | |
250 | D_CRYPT = undef | |
251 | !ELSE | |
252 | D_CRYPT = define | |
253 | CRYPT_FLAG = -DHAVE_DES_FCRYPT | |
254 | !ENDIF | |
255 | ||
256 | !IF "$(USE_OBJECT)" == "define" | |
257 | PERL_MALLOC = undef | |
258 | USE_5005THREADS = undef | |
259 | USE_MULTI = undef | |
260 | USE_IMP_SYS = define | |
261 | !ENDIF | |
262 | ||
263 | !IF "$(PERL_MALLOC)" == "" | |
264 | PERL_MALLOC = undef | |
265 | !ENDIF | |
266 | ||
267 | !IF "$(USE_5005THREADS)" == "" | |
268 | USE_5005THREADS = undef | |
269 | !ENDIF | |
270 | ||
271 | !IF "$(USE_5005THREADS)" == "define" | |
272 | USE_ITHREADS = undef | |
273 | !ENDIF | |
274 | ||
275 | !IF "$(USE_IMP_SYS)" == "define" | |
276 | PERL_MALLOC = undef | |
277 | !ENDIF | |
278 | ||
279 | !IF "$(CCTYPE)" == "" | |
280 | CCTYPE = MSVC60 | |
281 | !ENDIF | |
282 | ||
283 | !IF "$(USE_MULTI)" == "" | |
284 | USE_MULTI = undef | |
285 | !ENDIF | |
286 | ||
287 | !IF "$(USE_OBJECT)" == "" | |
288 | USE_OBJECT = undef | |
289 | !ENDIF | |
290 | ||
291 | !IF "$(USE_ITHREADS)" == "" | |
292 | USE_ITHREADS = undef | |
293 | !ENDIF | |
294 | ||
295 | !IF "$(USE_IMP_SYS)" == "" | |
296 | USE_IMP_SYS = undef | |
297 | !ENDIF | |
298 | ||
299 | !IF "$(USE_PERLCRT)" == "" | |
300 | USE_PERLCRT = undef | |
301 | !ENDIF | |
302 | ||
303 | !IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" | |
304 | USE_MULTI = define | |
305 | !ENDIF | |
306 | ||
307 | !IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" | |
308 | USE_MULTI = define | |
309 | USE_5005THREADS = undef | |
310 | !ENDIF | |
311 | ||
312 | !IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" | |
313 | BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT | |
314 | !ENDIF | |
315 | ||
316 | !IF "$(USE_IMP_SYS)" != "undef" | |
317 | BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS | |
318 | !ENDIF | |
319 | ||
320 | !IF "$(PROCESSOR_ARCHITECTURE)" == "" | |
321 | PROCESSOR_ARCHITECTURE = x86 | |
322 | !ENDIF | |
323 | ||
324 | !IF "$(USE_OBJECT)" == "define" | |
325 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object | |
326 | !ELSE | |
327 | !IF "$(USE_5005THREADS)" == "define" | |
328 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread | |
329 | !ELSE | |
330 | !IF "$(USE_MULTI)" == "define" | |
331 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi | |
332 | !ELSE | |
333 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) | |
334 | !ENDIF | |
335 | !ENDIF | |
336 | !ENDIF | |
337 | ||
338 | !IF "$(USE_ITHREADS)" == "define" | |
339 | ARCHNAME = $(ARCHNAME)-thread | |
340 | !ENDIF | |
341 | ||
342 | # Visual Studio 98 specific | |
343 | !IF "$(CCTYPE)" == "MSVC60" | |
344 | # VC 6.0 can load the socket dll on demand. Makes the test suite | |
345 | # run in about 10% less time. | |
346 | DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib | |
347 | !ENDIF | |
348 | ||
349 | ||
350 | ARCHDIR = ..\lib\$(ARCHNAME) | |
351 | COREDIR = ..\lib\CORE | |
352 | AUTODIR = ..\lib\auto | |
353 | LIBDIR = ..\lib | |
354 | EXTDIR = ..\ext | |
355 | PODDIR = ..\pod | |
356 | EXTUTILSDIR = $(LIBDIR)\ExtUtils | |
357 | ||
358 | # | |
359 | INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin | |
360 | INST_BIN = $(INST_SCRIPT)$(INST_ARCH) | |
361 | INST_LIB = $(INST_TOP)$(INST_VER)\lib | |
362 | INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) | |
363 | INST_COREDIR = $(INST_ARCHLIB)\CORE | |
364 | INST_POD = $(INST_LIB)\pod | |
365 | INST_HTML = $(INST_TOP)$(INST_VER)\html | |
366 | ||
367 | # | |
368 | # Programs to compile, build .lib files and link | |
369 | # | |
370 | ||
371 | CC = cl | |
372 | LINK32 = link | |
373 | LIB32 = $(LINK32) -lib | |
374 | RSC = rc | |
375 | ||
376 | # | |
377 | # Options | |
378 | # | |
379 | ||
380 | INCLUDES = -I$(COREDIR) -I.\include -I. -I.. | |
381 | #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX | |
382 | DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) | |
383 | LOCDEFS = -DPERLDLL -DPERL_CORE | |
384 | SUBSYS = console | |
385 | CXX_FLAG = -TP -GX | |
386 | ||
387 | !IF "$(USE_PERLCRT)" != "define" | |
388 | LIBC = msvcrt.lib | |
389 | !ELSE | |
390 | LIBC = PerlCRT.lib | |
391 | !ENDIF | |
392 | ||
393 | PERLEXE_RES = | |
394 | PERLDLL_RES = | |
395 | ||
396 | !IF "$(CFG)" == "Debug" | |
397 | ! IF "$(CCTYPE)" == "MSVC20" | |
398 | OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Z7 -DDEBUGGING | |
399 | ! ELSE | |
400 | OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Zi -DDEBUGGING | |
401 | ! ENDIF | |
402 | LINK_DBG = -debug | |
403 | !ELSE | |
404 | # -O1 yields smaller code, which turns out to be faster than -O2 | |
405 | OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG | |
406 | # VC 6.0 seems capable of compiling perl correctly with optimizations | |
407 | # enabled. Anything earlier fails tests. | |
408 | ! IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3" | |
409 | OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG | |
410 | ! ENDIF | |
411 | LINK_DBG = -debug | |
412 | !ENDIF | |
413 | ||
414 | ||
415 | !IF "$(USE_OBJECT)" == "define" | |
416 | OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) | |
417 | BUILDOPT = $(BUILDOPT) -DPERL_OBJECT | |
418 | !ENDIF | |
419 | ||
420 | !IF "$(USE_PERLCRT)" != "define" | |
421 | BUILDOPT = $(BUILDOPT) | |
422 | !ENDIF | |
423 | ||
424 | LIBBASEFILES = $(CRYPT_LIB) \ | |
425 | oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ | |
426 | comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ | |
427 | netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ | |
428 | version.lib odbc32.lib odbccp32.lib | |
429 | ||
430 | # we add LIBC here, since we may be using PerlCRT.dll | |
431 | LIBFILES = $(LIBBASEFILES) $(LIBC) | |
432 | ||
433 | CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ | |
434 | $(PCHFLAGS) $(OPTIMIZE) | |
435 | LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ | |
436 | -libpath:"$(INST_COREDIR)" \ | |
437 | -machine:$(PROCESSOR_ARCHITECTURE) | |
438 | OBJOUT_FLAG = -Fo | |
439 | EXEOUT_FLAG = -Fe | |
440 | ||
441 | CFLAGS_O = $(CFLAGS) $(BUILDOPT) | |
442 | ||
443 | #################### do not edit below this line ####################### | |
444 | ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## | |
445 | ||
446 | o = .obj | |
447 | ||
448 | # | |
449 | # Rules | |
450 | # | |
451 | ||
452 | .SUFFIXES : .c $(o) .dll .lib .exe .rc .res | |
453 | ||
454 | .c$(o): | |
455 | $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< | |
456 | ||
457 | .y.c: | |
458 | $(NOOP) | |
459 | ||
460 | $(o).dll: | |
461 | $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ | |
462 | -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) | |
463 | ||
464 | .rc.res: | |
465 | $(RSC) -i.. $< | |
466 | ||
467 | # | |
468 | # various targets | |
469 | PERLIMPLIB = ..\perl56.lib | |
470 | PERLDLL = ..\perl56.dll | |
471 | ||
472 | MINIPERL = ..\miniperl.exe | |
473 | MINIDIR = .\mini | |
474 | PERLEXE = ..\perl.exe | |
475 | WPERLEXE = ..\wperl.exe | |
476 | GLOBEXE = ..\perlglob.exe | |
477 | CONFIGPM = ..\lib\Config.pm | |
478 | MINIMOD = ..\lib\ExtUtils\Miniperl.pm | |
479 | X2P = ..\x2p\a2p.exe | |
480 | ||
481 | PL2BAT = bin\pl2bat.pl | |
482 | GLOBBAT = bin\perlglob.bat | |
483 | ||
484 | UTILS = \ | |
485 | ..\utils\h2ph \ | |
486 | ..\utils\splain \ | |
487 | ..\utils\dprofpp \ | |
488 | ..\utils\perlbug \ | |
489 | ..\utils\pl2pm \ | |
490 | ..\utils\c2ph \ | |
491 | ..\utils\h2xs \ | |
492 | ..\utils\perldoc \ | |
493 | ..\utils\perlcc \ | |
494 | ..\pod\checkpods \ | |
495 | ..\pod\pod2html \ | |
496 | ..\pod\pod2latex \ | |
497 | ..\pod\pod2man \ | |
498 | ..\pod\pod2text \ | |
499 | ..\pod\pod2usage \ | |
500 | ..\pod\podchecker \ | |
501 | ..\pod\podselect \ | |
502 | ..\x2p\find2perl \ | |
503 | ..\x2p\s2p \ | |
504 | bin\exetype.pl \ | |
505 | bin\runperl.pl \ | |
506 | bin\pl2bat.pl \ | |
507 | bin\perlglob.pl \ | |
508 | bin\search.pl | |
509 | ||
510 | MAKE = nmake -nologo | |
511 | ||
512 | CFGSH_TMPL = config.win64 | |
513 | CFGH_TMPL = config_H.win64 | |
514 | ||
515 | XCOPY = xcopy /f /r /i /d | |
516 | RCOPY = xcopy /f /r /i /e /d | |
517 | NOOP = @echo | |
518 | NULL = | |
519 | ||
520 | # | |
521 | # filenames given to xsubpp must have forward slashes (since it puts | |
522 | # full pathnames in #line strings) | |
523 | XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ | |
524 | -C++ -prototypes | |
525 | ||
526 | MICROCORE_SRC = \ | |
527 | ..\av.c \ | |
528 | ..\deb.c \ | |
529 | ..\doio.c \ | |
530 | ..\doop.c \ | |
531 | ..\dump.c \ | |
532 | ..\globals.c \ | |
533 | ..\gv.c \ | |
534 | ..\hv.c \ | |
535 | ..\mg.c \ | |
536 | ..\op.c \ | |
537 | ..\perl.c \ | |
538 | ..\perlapi.c \ | |
539 | ..\perly.c \ | |
540 | ..\pp.c \ | |
541 | ..\pp_ctl.c \ | |
542 | ..\pp_hot.c \ | |
543 | ..\pp_sys.c \ | |
544 | ..\regcomp.c \ | |
545 | ..\regexec.c \ | |
546 | ..\run.c \ | |
547 | ..\scope.c \ | |
548 | ..\sv.c \ | |
549 | ..\taint.c \ | |
550 | ..\toke.c \ | |
551 | ..\universal.c \ | |
552 | ..\utf8.c \ | |
553 | ..\util.c \ | |
554 | ..\xsutils.c | |
555 | ||
556 | EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c | |
557 | ||
558 | !IF "$(PERL_MALLOC)" == "define" | |
559 | EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c | |
560 | !ENDIF | |
561 | ||
562 | !IF "$(USE_OBJECT)" != "define" | |
563 | EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c | |
564 | !ENDIF | |
565 | ||
566 | WIN32_SRC = \ | |
567 | .\win32.c \ | |
568 | .\win32sck.c \ | |
569 | .\win32thread.c | |
570 | ||
571 | !IF "$(CRYPT_SRC)" != "" | |
572 | WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) | |
573 | !ENDIF | |
574 | ||
575 | DLL_SRC = $(DYNALOADER).c | |
576 | ||
577 | X2P_SRC = \ | |
578 | ..\x2p\a2p.c \ | |
579 | ..\x2p\hash.c \ | |
580 | ..\x2p\str.c \ | |
581 | ..\x2p\util.c \ | |
582 | ..\x2p\walk.c | |
583 | ||
584 | CORE_NOCFG_H = \ | |
585 | ..\av.h \ | |
586 | ..\cop.h \ | |
587 | ..\cv.h \ | |
588 | ..\dosish.h \ | |
589 | ..\embed.h \ | |
590 | ..\form.h \ | |
591 | ..\gv.h \ | |
592 | ..\handy.h \ | |
593 | ..\hv.h \ | |
594 | ..\iperlsys.h \ | |
595 | ..\mg.h \ | |
596 | ..\nostdio.h \ | |
597 | ..\op.h \ | |
598 | ..\opcode.h \ | |
599 | ..\perl.h \ | |
600 | ..\perlapi.h \ | |
601 | ..\perlsdio.h \ | |
602 | ..\perlsfio.h \ | |
603 | ..\perly.h \ | |
604 | ..\pp.h \ | |
605 | ..\proto.h \ | |
606 | ..\regexp.h \ | |
607 | ..\scope.h \ | |
608 | ..\sv.h \ | |
609 | ..\thread.h \ | |
610 | ..\unixish.h \ | |
611 | ..\utf8.h \ | |
612 | ..\util.h \ | |
613 | ..\warnings.h \ | |
614 | ..\XSUB.h \ | |
615 | ..\EXTERN.h \ | |
616 | ..\perlvars.h \ | |
617 | ..\intrpvar.h \ | |
618 | ..\thrdvar.h \ | |
619 | .\include\dirent.h \ | |
620 | .\include\netdb.h \ | |
621 | .\include\sys\socket.h \ | |
622 | .\win32.h | |
623 | ||
624 | CORE_H = $(CORE_NOCFG_H) .\config.h | |
625 | ||
626 | MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) | |
627 | CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) | |
628 | WIN32_OBJ = $(WIN32_SRC:.c=.obj) | |
629 | MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ | |
630 | $(MINIDIR)\miniperlmain$(o) \ | |
631 | $(MINIDIR)\perlio$(o) | |
632 | MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) | |
633 | MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) | |
634 | DLL_OBJ = $(DLL_SRC:.c=.obj) | |
635 | X2P_OBJ = $(X2P_SRC:.c=.obj) | |
636 | ||
637 | PERLDLL_OBJ = $(CORE_OBJ) | |
638 | PERLEXE_OBJ = perlmain$(o) | |
639 | ||
640 | PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) | |
641 | #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ) | |
642 | ||
643 | !IF "$(USE_SETARGV)" != "" | |
644 | SETARGV_OBJ = setargv$(o) | |
645 | !ENDIF | |
646 | ||
647 | DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ | |
648 | Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ | |
649 | Sys/Hostname | |
650 | STATIC_EXT = DynaLoader | |
651 | NONXS_EXT = Errno | |
652 | ||
653 | DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader | |
654 | SOCKET = $(EXTDIR)\Socket\Socket | |
655 | FCNTL = $(EXTDIR)\Fcntl\Fcntl | |
656 | OPCODE = $(EXTDIR)\Opcode\Opcode | |
657 | SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File | |
658 | IO = $(EXTDIR)\IO\IO | |
659 | POSIX = $(EXTDIR)\POSIX\POSIX | |
660 | ATTRS = $(EXTDIR)\attrs\attrs | |
661 | THREAD = $(EXTDIR)\Thread\Thread | |
662 | B = $(EXTDIR)\B\B | |
663 | RE = $(EXTDIR)\re\re | |
664 | DUMPER = $(EXTDIR)\Data\Dumper\Dumper | |
665 | ERRNO = $(EXTDIR)\Errno\Errno | |
666 | PEEK = $(EXTDIR)\Devel\Peek\Peek | |
667 | BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader | |
668 | DPROF = $(EXTDIR)\Devel\DProf\DProf | |
669 | GLOB = $(EXTDIR)\File\Glob\Glob | |
670 | HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname | |
671 | ||
672 | SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll | |
673 | FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll | |
674 | OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll | |
675 | SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll | |
676 | IO_DLL = $(AUTODIR)\IO\IO.dll | |
677 | POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll | |
678 | ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll | |
679 | THREAD_DLL = $(AUTODIR)\Thread\Thread.dll | |
680 | B_DLL = $(AUTODIR)\B\B.dll | |
681 | DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll | |
682 | PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll | |
683 | RE_DLL = $(AUTODIR)\re\re.dll | |
684 | BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll | |
685 | DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll | |
686 | GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll | |
687 | HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll | |
688 | ||
689 | ERRNO_PM = $(LIBDIR)\Errno.pm | |
690 | ||
691 | EXTENSION_C = \ | |
692 | $(SOCKET).c \ | |
693 | $(FCNTL).c \ | |
694 | $(OPCODE).c \ | |
695 | $(SDBM_FILE).c \ | |
696 | $(IO).c \ | |
697 | $(POSIX).c \ | |
698 | $(ATTRS).c \ | |
699 | $(THREAD).c \ | |
700 | $(RE).c \ | |
701 | $(DUMPER).c \ | |
702 | $(PEEK).c \ | |
703 | $(B).c \ | |
704 | $(BYTELOADER).c \ | |
705 | $(DPROF).c \ | |
706 | $(GLOB).c \ | |
707 | $(HOSTNAME).c | |
708 | ||
709 | EXTENSION_DLL = \ | |
710 | $(SOCKET_DLL) \ | |
711 | $(FCNTL_DLL) \ | |
712 | $(OPCODE_DLL) \ | |
713 | $(SDBM_FILE_DLL)\ | |
714 | $(IO_DLL) \ | |
715 | $(POSIX_DLL) \ | |
716 | $(ATTRS_DLL) \ | |
717 | $(DUMPER_DLL) \ | |
718 | $(PEEK_DLL) \ | |
719 | $(B_DLL) \ | |
720 | $(RE_DLL) \ | |
721 | $(THREAD_DLL) \ | |
722 | $(BYTELOADER_DLL) \ | |
723 | $(DPROF_DLL) \ | |
724 | $(GLOB_DLL) \ | |
725 | $(HOSTNAME_DLL) | |
726 | ||
727 | EXTENSION_PM = \ | |
728 | $(ERRNO_PM) | |
729 | ||
730 | POD2HTML = $(PODDIR)\pod2html | |
731 | POD2MAN = $(PODDIR)\pod2man | |
732 | POD2LATEX = $(PODDIR)\pod2latex | |
733 | POD2TEXT = $(PODDIR)\pod2text | |
734 | ||
735 | CFG_VARS = \ | |
736 | "INST_DRV=$(INST_DRV)" \ | |
737 | "INST_TOP=$(INST_TOP)" \ | |
738 | "INST_VER=$(INST_VER)" \ | |
739 | "INST_ARCH=$(INST_ARCH)" \ | |
740 | "archname=$(ARCHNAME)" \ | |
741 | "cc=$(CC)" \ | |
742 | "ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ | |
743 | "cf_email=$(EMAIL)" \ | |
744 | "d_crypt=$(D_CRYPT)" \ | |
745 | "d_mymalloc=$(PERL_MALLOC)" \ | |
746 | "libs=$(LIBFILES)" \ | |
747 | "incpath=$(CCINCDIR:"=\")" \ | |
748 | "libperl=$(PERLIMPLIB:..\=)" \ | |
749 | "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ | |
750 | "libc=$(LIBC)" \ | |
751 | "make=nmake" \ | |
752 | "static_ext=$(STATIC_EXT)" \ | |
753 | "dynamic_ext=$(DYNAMIC_EXT)" \ | |
754 | "nonxs_ext=$(NONXS_EXT)" \ | |
755 | "use5005threads=$(USE_5005THREADS)" \ | |
756 | "useithreads=$(USE_ITHREADS)" \ | |
757 | "usethreads=$(USE_5005THREADS)" \ | |
758 | "usemultiplicity=$(USE_MULTI)" \ | |
759 | "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ | |
760 | "optimize=$(OPTIMIZE:"=\")" | |
761 | ||
762 | # | |
763 | # Top targets | |
764 | # | |
765 | ||
766 | all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ | |
767 | $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) | |
768 | ||
769 | $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c | |
770 | ||
771 | #------------------------------------------------------------ | |
772 | ||
773 | $(GLOBEXE) : perlglob$(o) | |
774 | $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ | |
775 | perlglob$(o) setargv$(o) | |
776 | ||
777 | perlglob$(o) : perlglob.c | |
778 | ||
779 | config.w32 : $(CFGSH_TMPL) | |
780 | copy $(CFGSH_TMPL) config.w32 | |
781 | ||
782 | .\config.h : $(CFGH_TMPL) | |
783 | -del /f config.h | |
784 | copy $(CFGH_TMPL) config.h | |
785 | ||
786 | ..\config.sh : config.w32 $(MINIPERL) config_sh.PL | |
787 | $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh | |
788 | ||
789 | # this target is for when changes to the main config.sh happen | |
790 | # edit config.{b,v,g}c and make this target once for each supported | |
791 | # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) | |
792 | regen_config_h: | |
793 | perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh | |
794 | cd .. | |
795 | -del /f perl.exe | |
796 | perl configpm | |
797 | cd win32 | |
798 | -del /f $(CFGH_TMPL) | |
799 | -mkdir $(COREDIR) | |
800 | -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" | |
801 | rename config.h $(CFGH_TMPL) | |
802 | ||
803 | $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl | |
804 | cd .. && miniperl configpm | |
805 | if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) | |
806 | $(XCOPY) ..\*.h $(COREDIR)\*.* | |
807 | $(XCOPY) *.h $(COREDIR)\*.* | |
808 | $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* | |
809 | $(RCOPY) include $(COREDIR)\*.* | |
810 | $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ | |
811 | || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) | |
812 | ||
813 | $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) | |
814 | $(LINK32) -subsystem:console -out:$@ @<< | |
815 | $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) | |
816 | << | |
817 | ||
818 | $(MINIDIR) : | |
819 | if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" | |
820 | ||
821 | $(MINICORE_OBJ) : $(CORE_NOCFG_H) | |
822 | $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c | |
823 | ||
824 | $(MINIWIN32_OBJ) : $(CORE_NOCFG_H) | |
825 | $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c | |
826 | ||
827 | # -DPERL_IMPLICIT_SYS needs C++ for perllib.c | |
828 | # This is the only file that depends on perlhost.h, vmem.h, and vdir.h | |
829 | !IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" | |
830 | perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h | |
831 | $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c | |
832 | !ENDIF | |
833 | ||
834 | # 1. we don't want to rebuild miniperl.exe when config.h changes | |
835 | # 2. we don't want to rebuild miniperl.exe with non-default config.h | |
836 | $(MINI_OBJ) : $(CORE_NOCFG_H) | |
837 | ||
838 | $(WIN32_OBJ) : $(CORE_H) | |
839 | $(CORE_OBJ) : $(CORE_H) | |
840 | $(DLL_OBJ) : $(CORE_H) | |
841 | $(X2P_OBJ) : $(CORE_H) | |
842 | ||
843 | perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl | |
844 | $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ | |
845 | CCTYPE=$(CCTYPE) > perldll.def | |
846 | ||
847 | $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) | |
848 | $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< | |
849 | $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) | |
850 | << | |
851 | $(XCOPY) $(PERLIMPLIB) $(COREDIR) | |
852 | ||
853 | $(MINIMOD) : $(MINIPERL) ..\minimod.pl | |
854 | cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm | |
855 | ||
856 | ..\x2p\a2p$(o) : ..\x2p\a2p.c | |
857 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c | |
858 | ||
859 | ..\x2p\hash$(o) : ..\x2p\hash.c | |
860 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c | |
861 | ||
862 | ..\x2p\str$(o) : ..\x2p\str.c | |
863 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c | |
864 | ||
865 | ..\x2p\util$(o) : ..\x2p\util.c | |
866 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c | |
867 | ||
868 | ..\x2p\walk$(o) : ..\x2p\walk.c | |
869 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c | |
870 | ||
871 | $(X2P) : $(MINIPERL) $(X2P_OBJ) | |
872 | $(MINIPERL) ..\x2p\find2perl.PL | |
873 | $(MINIPERL) ..\x2p\s2p.PL | |
874 | $(LINK32) -subsystem:console -out:$@ @<< | |
875 | $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) | |
876 | << | |
877 | ||
878 | perlmain.c : runperl.c | |
879 | copy runperl.c perlmain.c | |
880 | ||
881 | perlmain$(o) : perlmain.c | |
882 | $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c | |
883 | ||
884 | $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) | |
885 | $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ | |
886 | $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) | |
887 | copy $(PERLEXE) $(WPERLEXE) | |
888 | $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS | |
889 | copy splittree.pl .. | |
890 | $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) | |
891 | ||
892 | $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) | |
893 | if not exist $(AUTODIR) mkdir $(AUTODIR) | |
894 | cd $(EXTDIR)\$(*B) | |
895 | ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL | |
896 | ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL | |
897 | cd ..\..\win32 | |
898 | $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) | |
899 | $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) | |
900 | cd $(EXTDIR)\$(*B) | |
901 | $(XSUBPP) dl_win32.xs > $(*B).c | |
902 | cd ..\..\win32 | |
903 | ||
904 | $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs | |
905 | copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs | |
906 | ||
907 | $(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs | |
908 | cd $(EXTDIR)\Data\$(*B) | |
909 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl | |
910 | $(MAKE) | |
911 | cd ..\..\..\win32 | |
912 | ||
913 | $(DPROF_DLL): $(PERLEXE) $(DPROF).xs | |
914 | cd $(EXTDIR)\Devel\$(*B) | |
915 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl | |
916 | $(MAKE) | |
917 | cd ..\..\..\win32 | |
918 | ||
919 | $(GLOB_DLL): $(PERLEXE) $(GLOB).xs | |
920 | cd $(EXTDIR)\File\$(*B) | |
921 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl | |
922 | $(MAKE) | |
923 | cd ..\..\..\win32 | |
924 | ||
925 | $(PEEK_DLL): $(PERLEXE) $(PEEK).xs | |
926 | cd $(EXTDIR)\Devel\$(*B) | |
927 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl | |
928 | $(MAKE) | |
929 | cd ..\..\..\win32 | |
930 | ||
931 | $(RE_DLL): $(PERLEXE) $(RE).xs | |
932 | cd $(EXTDIR)\$(*B) | |
933 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
934 | $(MAKE) | |
935 | cd ..\..\win32 | |
936 | ||
937 | $(B_DLL): $(PERLEXE) $(B).xs | |
938 | cd $(EXTDIR)\$(*B) | |
939 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
940 | $(MAKE) | |
941 | cd ..\..\win32 | |
942 | ||
943 | $(THREAD_DLL): $(PERLEXE) $(THREAD).xs | |
944 | cd $(EXTDIR)\$(*B) | |
945 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
946 | $(MAKE) | |
947 | cd ..\..\win32 | |
948 | ||
949 | $(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs | |
950 | cd $(EXTDIR)\$(*B) | |
951 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
952 | $(MAKE) | |
953 | cd ..\..\win32 | |
954 | ||
955 | $(POSIX_DLL): $(PERLEXE) $(POSIX).xs | |
956 | cd $(EXTDIR)\$(*B) | |
957 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
958 | $(MAKE) | |
959 | cd ..\..\win32 | |
960 | ||
961 | $(IO_DLL): $(PERLEXE) $(IO).xs | |
962 | cd $(EXTDIR)\$(*B) | |
963 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
964 | $(MAKE) | |
965 | cd ..\..\win32 | |
966 | ||
967 | $(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs | |
968 | cd $(EXTDIR)\$(*B) | |
969 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
970 | $(MAKE) | |
971 | cd ..\..\win32 | |
972 | ||
973 | $(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs | |
974 | cd $(EXTDIR)\$(*B) | |
975 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
976 | $(MAKE) | |
977 | cd ..\..\win32 | |
978 | ||
979 | $(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs | |
980 | cd $(EXTDIR)\$(*B) | |
981 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
982 | $(MAKE) | |
983 | cd ..\..\win32 | |
984 | ||
985 | $(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs | |
986 | cd $(EXTDIR)\$(*B) | |
987 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
988 | $(MAKE) | |
989 | cd ..\..\win32 | |
990 | ||
991 | $(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs | |
992 | cd $(EXTDIR)\Sys\$(*B) | |
993 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl | |
994 | $(MAKE) | |
995 | cd ..\..\..\win32 | |
996 | ||
997 | $(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs | |
998 | cd $(EXTDIR)\$(*B) | |
999 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
1000 | $(MAKE) | |
1001 | cd ..\..\win32 | |
1002 | ||
1003 | $(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL | |
1004 | cd $(EXTDIR)\$(*B) | |
1005 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl | |
1006 | $(MAKE) | |
1007 | cd ..\..\win32 | |
1008 | ||
1009 | doc: $(PERLEXE) | |
1010 | $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ | |
1011 | --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ | |
1012 | --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse | |
1013 | ||
1014 | utils: $(PERLEXE) $(X2P) | |
1015 | cd ..\utils | |
1016 | $(MAKE) PERL=$(MINIPERL) | |
1017 | cd ..\pod | |
1018 | copy ..\README.aix .\perlaix.pod | |
1019 | copy ..\README.amiga .\perlamiga.pod | |
1020 | copy ..\README.bs2000 .\perlbs2000.pod | |
1021 | copy ..\README.cygwin .\perlcygwin.pod | |
1022 | copy ..\README.dos .\perldos.pod | |
1023 | copy ..\README.epoc .\perlepoc.pod | |
1024 | copy ..\README.hpux .\perlhpux.pod | |
1025 | copy ..\README.mpeix .\perlmpeix.pod | |
1026 | copy ..\README.os2 .\perlos2.pod | |
1027 | copy ..\README.os390 .\perlos390.pod | |
1028 | copy ..\README.solaris .\perlsolaris.pod | |
1029 | copy ..\README.vmesa .\perlvmesa.pod | |
1030 | copy ..\vms\perlvms.pod .\perlvms.pod | |
1031 | copy ..\README.vos .\perlvos.pod | |
1032 | copy ..\README.win32 .\perlwin32.pod | |
1033 | $(MAKE) -f ..\win32\pod.mak converters | |
1034 | cd ..\win32 | |
1035 | $(PERLEXE) $(PL2BAT) $(UTILS) | |
1036 | ||
1037 | distclean: clean | |
1038 | -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ | |
1039 | $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) | |
1040 | -del /f *.def *.map | |
1041 | -del /f $(EXTENSION_DLL) $(EXTENSION_PM) | |
1042 | -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm | |
1043 | -del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm | |
1044 | -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm | |
1045 | -del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm | |
1046 | -del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists | |
1047 | -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm | |
a9bf183d | 1048 | -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm |
a5b1c163 RW |
1049 | -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm |
1050 | -del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm | |
1051 | -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm | |
1052 | -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm | |
1053 | -del /f $(LIBDIR)\File\Glob.pm | |
1054 | -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO | |
1055 | -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread | |
1056 | -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B | |
1057 | -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data | |
1058 | cd $(PODDIR) | |
1059 | -del /f *.html *.bat checkpods \ | |
1060 | perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \ | |
1061 | perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \ | |
1062 | perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \ | |
1063 | perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ | |
1064 | perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ | |
1065 | podchecker podselect | |
1066 | cd ..\utils | |
1067 | -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \ | |
1068 | *.bat perlcc pstruct | |
1069 | cd ..\win32 | |
1070 | cd ..\x2p | |
1071 | -del /f find2perl s2p | |
1072 | -del /f *.bat | |
1073 | cd ..\win32 | |
1074 | -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new | |
1075 | -del /f $(CONFIGPM) | |
1076 | -del /f bin\*.bat | |
1077 | cd $(EXTDIR) | |
1078 | -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib | |
1079 | cd ..\win32 | |
1080 | -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) | |
1081 | -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) | |
1082 | ||
1083 | install : all installbare installhtml | |
1084 | ||
1085 | installbare : utils | |
1086 | $(PERLEXE) ..\installperl | |
1087 | if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* | |
1088 | $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* | |
1089 | $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* | |
1090 | ||
1091 | installhtml : doc | |
1092 | $(RCOPY) html\*.* $(INST_HTML)\*.* | |
1093 | ||
1094 | inst_lib : $(CONFIGPM) | |
1095 | copy splittree.pl .. | |
1096 | $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) | |
1097 | $(RCOPY) ..\lib $(INST_LIB)\*.* | |
1098 | ||
1099 | minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils | |
1100 | $(XCOPY) $(MINIPERL) ..\t\perl.exe | |
1101 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
1102 | attrib -r ..\t\*.* | |
1103 | copy test ..\t | |
1104 | cd ..\t | |
1105 | $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t | |
1106 | cd ..\win32 | |
1107 | ||
1108 | test-prep : all utils | |
1109 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) | |
1110 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) | |
1111 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) | |
1112 | ||
1113 | test : test-prep | |
1114 | cd ..\t | |
1115 | $(PERLEXE) -I..\lib harness | |
1116 | cd ..\win32 | |
1117 | ||
1118 | test-notty : test-prep | |
1119 | set PERL_SKIP_TTY_TEST=1 | |
1120 | cd ..\t | |
1121 | $(PERLEXE) -I..\lib harness | |
1122 | cd ..\win32 | |
1123 | ||
1124 | test-wide : test-prep | |
1125 | set HARNESS_PERL_SWITCHES=-C | |
1126 | cd ..\t | |
1127 | $(PERLEXE) -I..\lib harness | |
1128 | cd ..\win32 | |
1129 | ||
1130 | test-wide-notty : test-prep | |
1131 | set PERL_SKIP_TTY_TEST=1 | |
1132 | set HARNESS_PERL_SWITCHES=-C | |
1133 | cd ..\t | |
1134 | $(PERLEXE) -I..\lib harness | |
1135 | cd ..\win32 | |
1136 | ||
1137 | clean : | |
1138 | -@erase miniperlmain$(o) | |
1139 | -@erase $(MINIPERL) | |
1140 | -@erase perlglob$(o) | |
1141 | -@erase perlmain$(o) | |
1142 | -@erase config.w32 | |
1143 | -@erase /f config.h | |
1144 | -@erase $(GLOBEXE) | |
1145 | -@erase $(PERLEXE) | |
1146 | -@erase $(WPERLEXE) | |
1147 | -@erase $(PERLDLL) | |
1148 | -@erase $(CORE_OBJ) | |
1149 | -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) | |
1150 | -@erase $(WIN32_OBJ) | |
1151 | -@erase $(DLL_OBJ) | |
1152 | -@erase $(X2P_OBJ) | |
1153 | -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res | |
1154 | -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat | |
1155 | -@erase ..\x2p\*.exe ..\x2p\*.bat | |
1156 | -@erase *.ilk | |
1157 | -@erase *.pdb | |
1158 | ||
1159 | # Handy way to run perlbug -ok without having to install and run the | |
1160 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
1161 | # Please *don't* use this unless all tests pass. | |
1162 | # If you want to report test failures, use "nmake nok" instead. | |
1163 | ok: utils | |
1164 | $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" | |
1165 | ||
1166 | okfile: utils | |
1167 | $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok | |
1168 | ||
1169 | nok: utils | |
1170 | $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" | |
1171 | ||
1172 | nokfile: utils | |
1173 | $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok |