[perl5.git] / pod / Makefile.SH

case $PERL_CONFIG_SH in
'')
	if test -f config.sh; then TOP=.;
	elif test -f ../config.sh; then TOP=..;
	elif test -f ../../config.sh; then TOP=../..;
	elif test -f ../../../config.sh; then TOP=../../..;
	elif test -f ../../../../config.sh; then TOP=../../../..;
	else
		echo "Can't find config.sh."; exit 1
	fi
	. $TOP/config.sh
	;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac

if test -d pod; then
  cd pod || exit 1
fi
POD=`echo *.pod`
MAN=`echo $POD|sed 's/\.pod/\.man/g'`
HTML=`echo $POD|sed 's/perltoc.pod//'|sed 's/\.pod/\.html/g'`
TEX=`echo $POD|sed 's/\.pod/\.tex/g'`

echo "Extracting pod/Makefile (with variable substitutions)"
: This section of the file will have variable substitutions done on it.
: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!.
: Protect any dollar signs and backticks that you do not want interpreted
: by putting a backslash in front.  You may delete these comments.

$spitshell >Makefile <<!GROK!THIS!
# pod/Makefile
# This file is derived from pod/Makefile.SH.  Any changes made here will
# be lost the next time you run Configure.

POD = $POD

MAN = $MAN

# no perltoc.html
HTML = $HTML

TEX  = $TEX  

# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth

!GROK!THIS!

## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'

CONVERTERS = pod2html pod2latex pod2man pod2text checkpods \
		pod2usage podchecker podselect

HTMLROOT = /	# Change this to fix cross-references in HTML
POD2HTML = pod2html \
	    --htmlroot=$(HTMLROOT) \
	    --podroot=.. --podpath=pod:lib:ext:vms \
	    --libpods=perlfunc:perlguts:perlvar:perlrun:perlop

PERL = ../miniperl
PERLILIB = $(PERL) -I../lib
REALPERL = ../perl

all: $(CONVERTERS) man

converters: $(CONVERTERS)

regen_pods: perlmodlib.pod toc

buildtoc:	buildtoc.PL perl.pod ../MANIFEST
	$(PERLILIB) buildtoc.PL

perltoc.pod:	buildtoc

man:	pod2man $(MAN)

html:	pod2html $(HTML)

tex:	pod2latex $(TEX)

toc perltoc.pod:	buildtoc
	$(PERLILIB) buildtoc

.SUFFIXES: .pm .pod

.SUFFIXES: .man

.pm.man:     pod2man
	$(PERL) -I../lib pod2man $*.pm >$*.man

.pod.man:     pod2man
	$(PERL) -I../lib pod2man $*.pod >$*.man

.SUFFIXES: .html

.pm.html:    pod2html
	$(PERL) -I../lib $(POD2HTML) --infile=$*.pm --outfile=$*.html

.pod.html:    pod2html
	$(PERL) -I../lib $(POD2HTML) --infile=$*.pod --outfile=$*.html

.SUFFIXES: .tex

.pm.tex: pod2latex
	$(PERL) -I../lib pod2latex $*.pm

.pod.tex: pod2latex
	$(PERL) -I../lib pod2latex $*.pod

clean:
	rm -f $(MAN)
	rm -f $(HTML)
	rm -f $(TEX)
	rm -f pod2html-*cache
	rm -f *.aux *.log *.exe

realclean:	clean
	rm -f $(CONVERTERS)

distclean:	realclean

veryclean:	distclean
	-rm -f *~ *.orig

check:	checkpods
	@echo "checking..."; \
	$(PERL) -I../lib checkpods $(POD)

# Dependencies.
pod2latex:	pod2latex.PL ../lib/Config.pm
	$(LDLIBPTH) $(PERL) -I../lib pod2latex.PL

pod2html:	pod2html.PL ../lib/Config.pm
	$(LDLIBPTH) $(PERL) -I ../lib pod2html.PL

pod2man:	pod2man.PL ../lib/Config.pm
	$(LDLIBPTH) $(PERL) -I ../lib pod2man.PL

pod2text:	pod2text.PL ../lib/Config.pm
	$(LDLIBPTH) $(PERL) -I ../lib pod2text.PL

checkpods:	checkpods.PL ../lib/Config.pm
	$(LDLIBPTH) $(PERL) -I ../lib checkpods.PL

pod2usage:	pod2usage.PL ../lib/Config.pm
	$(PERL) -I ../lib pod2usage.PL

podchecker:	podchecker.PL ../lib/Config.pm
	$(PERL) -I ../lib podchecker.PL

podselect:	podselect.PL ../lib/Config.pm
	$(PERL) -I ../lib podselect.PL

perlmodlib.pod:	$(PERL) perlmodlib.PL ../mv-if-diff ../MANIFEST
	rm -f perlmodlib.tmp
	$(PERL) -I ../lib perlmodlib.PL
	sh ../mv-if-diff perlmodlib.tmp perlmodlib.pod

compile: all
	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2latex.exe pod2latex -log ../compilelog
	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2man.exe pod2man -log ../compilelog
	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2text.exe pod2text -log ../compilelog
	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o checkpods.exe checkpods -log ../compilelog

!NO!SUBS!
Commit	Line	Data
aa275be2	1	case $PERL_CONFIG_SH in
4755096e GS	2	'')
	3	if test -f config.sh; then TOP=.;
	4	elif test -f ../config.sh; then TOP=..;
	5	elif test -f ../../config.sh; then TOP=../..;
	6	elif test -f ../../../config.sh; then TOP=../../..;
	7	elif test -f ../../../../config.sh; then TOP=../../../..;
	8	else
	9	echo "Can't find config.sh."; exit 1
	10	fi
	11	. $TOP/config.sh
	12	;;
	13	esac
	14	: This forces SH files to create target in same directory as SH file.
	15	: This is so that make depend always knows where to find SH derivatives.
	16	case "$0" in
	17	/) cd `expr X$0 : 'X\(.*\)/'` ;;
	18	esac
	19
	20	if test -d pod; then
	21	cd pod \|\| exit 1
	22	fi
	23	POD=`echo *.pod`
	24	MAN=`echo $POD\|sed 's/\.pod/\.man/g'`
e788edff	25	HTML=`echo $POD\|sed 's/perltoc.pod//'\|sed 's/\.pod/\.html/g'`
4755096e GS	26	TEX=`echo $POD\|sed 's/\.pod/\.tex/g'`
	27
	28	echo "Extracting pod/Makefile (with variable substitutions)"
	29	: This section of the file will have variable substitutions done on it.
	30	: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!.
	31	: Protect any dollar signs and backticks that you do not want interpreted
	32	: by putting a backslash in front. You may delete these comments.
	33
	34	$spitshell >Makefile <<!GROK!THIS!
	35	# pod/Makefile
	36	# This file is derived from pod/Makefile.SH. Any changes made here will
	37	# be lost the next time you run Configure.
	38
	39	POD = $POD
	40
	41	MAN = $MAN
	42
	43	# no perltoc.html
	44	HTML = $HTML
	45
	46	TEX = $TEX
	47
c2e66d9e GS	48	# The following is used to include the current directory in
	49	# the dynamic loader path you are building a shared libperl.
	50	LDLIBPTH = $ldlibpth
	51
4755096e GS	52	!GROK!THIS!
	53
	54	## In the following dollars and backticks do not need the extra backslash.
	55	$spitshell >>Makefile <<'!NO!SUBS!'
	56
	57	CONVERTERS = pod2html pod2latex pod2man pod2text checkpods \
	58	pod2usage podchecker podselect
	59
	60	HTMLROOT = / # Change this to fix cross-references in HTML
	61	POD2HTML = pod2html \
	62	--htmlroot=$(HTMLROOT) \
	63	--podroot=.. --podpath=pod:lib:ext:vms \
	64	--libpods=perlfunc:perlguts:perlvar:perlrun:perlop
	65
	66	PERL = ../miniperl
2607bbb4	67	PERLILIB = $(PERL) -I../lib
4755096e GS	68	REALPERL = ../perl
	69
	70	all: $(CONVERTERS) man
	71
	72	converters: $(CONVERTERS)
	73
	74	regen_pods: perlmodlib.pod toc
	75
c2e66d9e	76	buildtoc: buildtoc.PL perl.pod ../MANIFEST
2607bbb4	77	$(PERLILIB) buildtoc.PL
a7ffa9b9 NC	78
a7ffa9b9 NC	79	perltoc.pod: buildtoc
4755096e GS	80
	81	man: pod2man $(MAN)
	82
	83	html: pod2html $(HTML)
	84
	85	tex: pod2latex $(TEX)
	86
1fa7ca25	87	toc perltoc.pod: buildtoc
2607bbb4	88	$(PERLILIB) buildtoc
4755096e GS	89
	90	.SUFFIXES: .pm .pod
	91
	92	.SUFFIXES: .man
	93
	94	.pm.man: pod2man
	95	$(PERL) -I../lib pod2man $.pm >$.man
	96
	97	.pod.man: pod2man
	98	$(PERL) -I../lib pod2man $.pod >$.man
	99
	100	.SUFFIXES: .html
	101
	102	.pm.html: pod2html
	103	$(PERL) -I../lib $(POD2HTML) --infile=$.pm --outfile=$.html
	104
	105	.pod.html: pod2html
	106	$(PERL) -I../lib $(POD2HTML) --infile=$.pod --outfile=$.html
	107
	108	.SUFFIXES: .tex
	109
	110	.pm.tex: pod2latex
	111	$(PERL) -I../lib pod2latex $*.pm
	112
	113	.pod.tex: pod2latex
	114	$(PERL) -I../lib pod2latex $*.pod
	115
	116	clean:
	117	rm -f $(MAN)
	118	rm -f $(HTML)
	119	rm -f $(TEX)
	120	rm -f pod2html-*cache
	121	rm -f .aux .log *.exe
	122
	123	realclean: clean
	124	rm -f $(CONVERTERS)
	125
	126	distclean: realclean
	127
2edbd6da JH	128	veryclean: distclean
	129	-rm -f ~ .orig
	130
4755096e GS	131	check: checkpods
	132	@echo "checking..."; \
	133	$(PERL) -I../lib checkpods $(POD)
	134
	135	# Dependencies.
	136	pod2latex: pod2latex.PL ../lib/Config.pm
c2e66d9e	137	$(LDLIBPTH) $(PERL) -I../lib pod2latex.PL
4755096e GS	138
4755096e GS	139	pod2html: pod2html.PL ../lib/Config.pm
c2e66d9e	140	$(LDLIBPTH) $(PERL) -I ../lib pod2html.PL
4755096e GS	141
4755096e GS	142	pod2man: pod2man.PL ../lib/Config.pm
c2e66d9e	143	$(LDLIBPTH) $(PERL) -I ../lib pod2man.PL
4755096e GS	144
4755096e GS	145	pod2text: pod2text.PL ../lib/Config.pm
c2e66d9e	146	$(LDLIBPTH) $(PERL) -I ../lib pod2text.PL
4755096e GS	147
4755096e GS	148	checkpods: checkpods.PL ../lib/Config.pm
c2e66d9e	149	$(LDLIBPTH) $(PERL) -I ../lib checkpods.PL
4755096e GS	150
	151	pod2usage: pod2usage.PL ../lib/Config.pm
	152	$(PERL) -I ../lib pod2usage.PL
	153
	154	podchecker: podchecker.PL ../lib/Config.pm
	155	$(PERL) -I ../lib podchecker.PL
	156
	157	podselect: podselect.PL ../lib/Config.pm
	158	$(PERL) -I ../lib podselect.PL
	159
1fa7ca25	160	perlmodlib.pod: $(PERL) perlmodlib.PL ../mv-if-diff ../MANIFEST
4755096e GS	161	rm -f perlmodlib.tmp
	162	$(PERL) -I ../lib perlmodlib.PL
	163	sh ../mv-if-diff perlmodlib.tmp perlmodlib.pod
	164
	165	compile: all
f5eac215 JH	166	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2latex.exe pod2latex -log ../compilelog
	167	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2man.exe pod2man -log ../compilelog
	168	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o pod2text.exe pod2text -log ../compilelog
	169	$(REALPERL) -I../lib ../utils/perlcc -I .. -L .. -o checkpods.exe checkpods -log ../compilelog
4755096e GS	170
4755096e GS	171	!NO!SUBS!