Commit | Line | Data |
---|---|---|
f8881bd9 | 1 | package SelfLoader; |
f8881bd9 AD |
2 | require Exporter; |
3 | @ISA = qw(Exporter); | |
4 | @EXPORT = qw(AUTOLOAD); | |
8878f897 | 5 | $VERSION = "1.0905"; |
52128c7b | 6 | sub Version {$VERSION} |
f8881bd9 AD |
7 | $DEBUG = 0; |
8 | ||
9 | my %Cache; # private cache for all SelfLoader's client packages | |
10 | ||
09bef843 | 11 | # allow checking for valid ': attrlist' attachments |
2611e30b JH |
12 | # (we use 'our' rather than 'my' here, due to the rather complex and buggy |
13 | # behaviour of lexicals with qr// and (??{$lex}) ) | |
14 | our $nested; | |
14455d6c | 15 | $nested = qr{ \( (?: (?> [^()]+ ) | (??{ $nested }) )* \) }x; |
2611e30b JH |
16 | our $one_attr = qr{ (?> (?! \d) \w+ (?:$nested)? ) (?:\s*\:\s*|\s+(?!\:)) }x; |
17 | our $attr_list = qr{ \s* : \s* (?: $one_attr )* }x; | |
09bef843 | 18 | |
cca8f13b AF |
19 | # in croak and carp, protect $@ from "require Carp;" RT #40216 |
20 | ||
21 | sub croak { { local $@; require Carp; } goto &Carp::croak } | |
22 | sub carp { { local $@; require Carp; } goto &Carp::carp } | |
e3d0cac0 | 23 | |
f8881bd9 AD |
24 | AUTOLOAD { |
25 | print STDERR "SelfLoader::AUTOLOAD for $AUTOLOAD\n" if $DEBUG; | |
c7675058 | 26 | my $SL_code = $Cache{$AUTOLOAD}; |
bfdd1499 | 27 | my $save = $@; # evals in both AUTOLOAD and _load_stubs can corrupt $@ |
c7675058 | 28 | unless ($SL_code) { |
f8881bd9 AD |
29 | # Maybe this pack had stubs before __DATA__, and never initialized. |
30 | # Or, this maybe an automatic DESTROY method call when none exists. | |
31 | $AUTOLOAD =~ m/^(.*)::/; | |
32 | SelfLoader->_load_stubs($1) unless exists $Cache{"${1}::<DATA"}; | |
c7675058 JG |
33 | $SL_code = $Cache{$AUTOLOAD}; |
34 | $SL_code = "sub $AUTOLOAD { }" | |
35 | if (!$SL_code and $AUTOLOAD =~ m/::DESTROY$/); | |
36 | croak "Undefined subroutine $AUTOLOAD" unless $SL_code; | |
f8881bd9 | 37 | } |
c7675058 | 38 | print STDERR "SelfLoader::AUTOLOAD eval: $SL_code\n" if $DEBUG; |
bfdd1499 | 39 | |
c7675058 | 40 | eval $SL_code; |
f8881bd9 AD |
41 | if ($@) { |
42 | $@ =~ s/ at .*\n//; | |
43 | croak $@; | |
44 | } | |
bfdd1499 | 45 | $@ = $save; |
f8881bd9 AD |
46 | defined(&$AUTOLOAD) || die "SelfLoader inconsistency error"; |
47 | delete $Cache{$AUTOLOAD}; | |
48 | goto &$AUTOLOAD | |
49 | } | |
50 | ||
51 | sub load_stubs { shift->_load_stubs((caller)[0]) } | |
52 | ||
53 | sub _load_stubs { | |
33235a50 NC |
54 | # $endlines is used by Devel::SelfStubber to capture lines after __END__ |
55 | my($self, $callpack, $endlines) = @_; | |
f8881bd9 AD |
56 | my $fh = \*{"${callpack}::DATA"}; |
57 | my $currpack = $callpack; | |
58 | my($line,$name,@lines, @stubs, $protoype); | |
59 | ||
60 | print STDERR "SelfLoader::load_stubs($callpack)\n" if $DEBUG; | |
61 | croak("$callpack doesn't contain an __DATA__ token") | |
62 | unless fileno($fh); | |
63 | $Cache{"${currpack}::<DATA"} = 1; # indicate package is cached | |
64 | ||
52128c7b | 65 | local($/) = "\n"; |
40da2db3 | 66 | while(defined($line = <$fh>) and $line !~ m/^__END__/) { |
09bef843 | 67 | if ($line =~ m/^sub\s+([\w:]+)\s*((?:\([\\\$\@\%\&\*\;]*\))?(?:$attr_list)?)/) { |
f8881bd9 AD |
68 | push(@stubs, $self->_add_to_cache($name, $currpack, \@lines, $protoype)); |
69 | $protoype = $2; | |
70 | @lines = ($line); | |
71 | if (index($1,'::') == -1) { # simple sub name | |
72 | $name = "${currpack}::$1"; | |
73 | } else { # sub name with package | |
74 | $name = $1; | |
75 | $name =~ m/^(.*)::/; | |
76 | if (defined(&{"${1}::AUTOLOAD"})) { | |
77 | \&{"${1}::AUTOLOAD"} == \&SelfLoader::AUTOLOAD || | |
78 | die 'SelfLoader Error: attempt to specify Selfloading', | |
79 | " sub $name in non-selfloading module $1"; | |
80 | } else { | |
81 | $self->export($1,'AUTOLOAD'); | |
82 | } | |
83 | } | |
84 | } elsif ($line =~ m/^package\s+([\w:]+)/) { # A package declared | |
85 | push(@stubs, $self->_add_to_cache($name, $currpack, \@lines, $protoype)); | |
86 | $self->_package_defined($line); | |
87 | $name = ''; | |
88 | @lines = (); | |
89 | $currpack = $1; | |
90 | $Cache{"${currpack}::<DATA"} = 1; # indicate package is cached | |
91 | if (defined(&{"${1}::AUTOLOAD"})) { | |
92 | \&{"${1}::AUTOLOAD"} == \&SelfLoader::AUTOLOAD || | |
93 | die 'SelfLoader Error: attempt to specify Selfloading', | |
94 | " package $currpack which already has AUTOLOAD"; | |
95 | } else { | |
96 | $self->export($currpack,'AUTOLOAD'); | |
97 | } | |
98 | } else { | |
99 | push(@lines,$line); | |
100 | } | |
101 | } | |
33235a50 NC |
102 | if (defined($line) && $line =~ /^__END__/) { # __END__ |
103 | unless ($line =~ /^__END__\s*DATA/) { | |
104 | if ($endlines) { | |
105 | # Devel::SelfStubber would like us to capture the lines after | |
106 | # __END__ so it can write out the entire file | |
107 | @$endlines = <$fh>; | |
108 | } | |
109 | close($fh); | |
110 | } | |
111 | } | |
f8881bd9 AD |
112 | push(@stubs, $self->_add_to_cache($name, $currpack, \@lines, $protoype)); |
113 | eval join('', @stubs) if @stubs; | |
114 | } | |
115 | ||
116 | ||
117 | sub _add_to_cache { | |
118 | my($self,$fullname,$pack,$lines, $protoype) = @_; | |
119 | return () unless $fullname; | |
8878f897 | 120 | carp("Redefining sub $fullname") |
e3d0cac0 | 121 | if exists $Cache{$fullname}; |
f8881bd9 AD |
122 | $Cache{$fullname} = join('', "package $pack; ",@$lines); |
123 | print STDERR "SelfLoader cached $fullname: $Cache{$fullname}" if $DEBUG; | |
124 | # return stub to be eval'd | |
125 | defined($protoype) ? "sub $fullname $protoype;" : "sub $fullname;" | |
126 | } | |
127 | ||
128 | sub _package_defined {} | |
129 | ||
130 | 1; | |
131 | __END__ | |
cb1a09d0 | 132 | |
f8881bd9 AD |
133 | =head1 NAME |
134 | ||
135 | SelfLoader - load functions only on demand | |
136 | ||
137 | =head1 SYNOPSIS | |
138 | ||
139 | package FOOBAR; | |
140 | use SelfLoader; | |
3cb6de81 | 141 | |
f8881bd9 | 142 | ... (initializing code) |
3cb6de81 | 143 | |
f8881bd9 AD |
144 | __DATA__ |
145 | sub {.... | |
146 | ||
147 | ||
148 | =head1 DESCRIPTION | |
149 | ||
150 | This module tells its users that functions in the FOOBAR package are to be | |
463e8aa9 | 151 | autoloaded from after the C<__DATA__> token. See also |
152 | L<perlsub/"Autoloading">. | |
f8881bd9 AD |
153 | |
154 | =head2 The __DATA__ token | |
155 | ||
463e8aa9 | 156 | The C<__DATA__> token tells the perl compiler that the perl code |
157 | for compilation is finished. Everything after the C<__DATA__> token | |
f8881bd9 | 158 | is available for reading via the filehandle FOOBAR::DATA, |
463e8aa9 | 159 | where FOOBAR is the name of the current package when the C<__DATA__> |
160 | token is reached. This works just the same as C<__END__> does in | |
161 | package 'main', but for other modules data after C<__END__> is not | |
f610777f | 162 | automatically retrievable, whereas data after C<__DATA__> is. |
463e8aa9 | 163 | The C<__DATA__> token is not recognized in versions of perl prior to |
f8881bd9 AD |
164 | 5.001m. |
165 | ||
463e8aa9 | 166 | Note that it is possible to have C<__DATA__> tokens in the same package |
167 | in multiple files, and that the last C<__DATA__> token in a given | |
f8881bd9 | 168 | package that is encountered by the compiler is the one accessible |
463e8aa9 | 169 | by the filehandle. This also applies to C<__END__> and main, i.e. if |
170 | the 'main' program has an C<__END__>, but a module 'require'd (_not_ 'use'd) | |
171 | by that program has a 'package main;' declaration followed by an 'C<__DATA__>', | |
172 | then the C<DATA> filehandle is set to access the data after the C<__DATA__> | |
173 | in the module, _not_ the data after the C<__END__> token in the 'main' | |
f8881bd9 AD |
174 | program, since the compiler encounters the 'require'd file later. |
175 | ||
176 | =head2 SelfLoader autoloading | |
177 | ||
463e8aa9 | 178 | The B<SelfLoader> works by the user placing the C<__DATA__> |
179 | token I<after> perl code which needs to be compiled and | |
180 | run at 'require' time, but I<before> subroutine declarations | |
f8881bd9 AD |
181 | that can be loaded in later - usually because they may never |
182 | be called. | |
183 | ||
463e8aa9 | 184 | The B<SelfLoader> will read from the FOOBAR::DATA filehandle to |
185 | load in the data after C<__DATA__>, and load in any subroutine | |
f8881bd9 | 186 | when it is called. The costs are the one-time parsing of the |
463e8aa9 | 187 | data after C<__DATA__>, and a load delay for the _first_ |
f8881bd9 AD |
188 | call of any autoloaded function. The benefits (hopefully) |
189 | are a speeded up compilation phase, with no need to load | |
190 | functions which are never used. | |
191 | ||
463e8aa9 | 192 | The B<SelfLoader> will stop reading from C<__DATA__> if |
193 | it encounters the C<__END__> token - just as you would expect. | |
194 | If the C<__END__> token is present, and is followed by the | |
195 | token DATA, then the B<SelfLoader> leaves the FOOBAR::DATA | |
f8881bd9 AD |
196 | filehandle open on the line after that token. |
197 | ||
463e8aa9 | 198 | The B<SelfLoader> exports the C<AUTOLOAD> subroutine to the |
199 | package using the B<SelfLoader>, and this loads the called | |
f8881bd9 AD |
200 | subroutine when it is first called. |
201 | ||
202 | There is no advantage to putting subroutines which will _always_ | |
463e8aa9 | 203 | be called after the C<__DATA__> token. |
f8881bd9 AD |
204 | |
205 | =head2 Autoloading and package lexicals | |
206 | ||
207 | A 'my $pack_lexical' statement makes the variable $pack_lexical | |
463e8aa9 | 208 | local _only_ to the file up to the C<__DATA__> token. Subroutines |
f8881bd9 AD |
209 | declared elsewhere _cannot_ see these types of variables, |
210 | just as if you declared subroutines in the package but in another | |
211 | file, they cannot see these variables. | |
212 | ||
213 | So specifically, autoloaded functions cannot see package | |
463e8aa9 | 214 | lexicals (this applies to both the B<SelfLoader> and the Autoloader). |
215 | The C<vars> pragma provides an alternative to defining package-level | |
216 | globals that will be visible to autoloaded routines. See the documentation | |
217 | on B<vars> in the pragma section of L<perlmod>. | |
f8881bd9 AD |
218 | |
219 | =head2 SelfLoader and AutoLoader | |
220 | ||
463e8aa9 | 221 | The B<SelfLoader> can replace the AutoLoader - just change 'use AutoLoader' |
222 | to 'use SelfLoader' (though note that the B<SelfLoader> exports | |
f8881bd9 AD |
223 | the AUTOLOAD function - but if you have your own AUTOLOAD and |
224 | are using the AutoLoader too, you probably know what you're doing), | |
463e8aa9 | 225 | and the C<__END__> token to C<__DATA__>. You will need perl version 5.001m |
f8881bd9 AD |
226 | or later to use this (version 5.001 with all patches up to patch m). |
227 | ||
463e8aa9 | 228 | There is no need to inherit from the B<SelfLoader>. |
f8881bd9 | 229 | |
463e8aa9 | 230 | The B<SelfLoader> works similarly to the AutoLoader, but picks up the |
231 | subs from after the C<__DATA__> instead of in the 'lib/auto' directory. | |
f610777f | 232 | There is a maintenance gain in not needing to run AutoSplit on the module |
f8881bd9 AD |
233 | at installation, and a runtime gain in not needing to keep opening and |
234 | closing files to load subs. There is a runtime loss in needing | |
463e8aa9 | 235 | to parse the code after the C<__DATA__>. Details of the B<AutoLoader> and |
236 | another view of these distinctions can be found in that module's | |
237 | documentation. | |
f8881bd9 AD |
238 | |
239 | =head2 __DATA__, __END__, and the FOOBAR::DATA filehandle. | |
240 | ||
241 | This section is only relevant if you want to use | |
463e8aa9 | 242 | the C<FOOBAR::DATA> together with the B<SelfLoader>. |
243 | ||
244 | Data after the C<__DATA__> token in a module is read using the | |
245 | FOOBAR::DATA filehandle. C<__END__> can still be used to denote the end | |
246 | of the C<__DATA__> section if followed by the token DATA - this is supported | |
247 | by the B<SelfLoader>. The C<FOOBAR::DATA> filehandle is left open if an | |
248 | C<__END__> followed by a DATA is found, with the filehandle positioned at | |
249 | the start of the line after the C<__END__> token. If no C<__END__> token is | |
250 | present, or an C<__END__> token with no DATA token on the same line, then | |
251 | the filehandle is closed. | |
252 | ||
253 | The B<SelfLoader> reads from wherever the current | |
254 | position of the C<FOOBAR::DATA> filehandle is, until the | |
255 | EOF or C<__END__>. This means that if you want to use | |
f8881bd9 AD |
256 | that filehandle (and ONLY if you want to), you should either |
257 | ||
258 | 1. Put all your subroutine declarations immediately after | |
463e8aa9 | 259 | the C<__DATA__> token and put your own data after those |
260 | declarations, using the C<__END__> token to mark the end | |
261 | of subroutine declarations. You must also ensure that the B<SelfLoader> | |
1fef88e7 | 262 | reads first by calling 'SelfLoader-E<gt>load_stubs();', or by using a |
f8881bd9 AD |
263 | function which is selfloaded; |
264 | ||
265 | or | |
266 | ||
463e8aa9 | 267 | 2. You should read the C<FOOBAR::DATA> filehandle first, leaving |
f8881bd9 AD |
268 | the handle open and positioned at the first line of subroutine |
269 | declarations. | |
270 | ||
271 | You could conceivably do both. | |
272 | ||
273 | =head2 Classes and inherited methods. | |
274 | ||
275 | For modules which are not classes, this section is not relevant. | |
276 | This section is only relevant if you have methods which could | |
277 | be inherited. | |
278 | ||
279 | A subroutine stub (or forward declaration) looks like | |
280 | ||
281 | sub stub; | |
282 | ||
283 | i.e. it is a subroutine declaration without the body of the | |
284 | subroutine. For modules which are not classes, there is no real | |
285 | need for stubs as far as autoloading is concerned. | |
286 | ||
287 | For modules which ARE classes, and need to handle inherited methods, | |
288 | stubs are needed to ensure that the method inheritance mechanism works | |
289 | properly. You can load the stubs into the module at 'require' time, by | |
1fef88e7 | 290 | adding the statement 'SelfLoader-E<gt>load_stubs();' to the module to do |
f8881bd9 AD |
291 | this. |
292 | ||
463e8aa9 | 293 | The alternative is to put the stubs in before the C<__DATA__> token BEFORE |
294 | releasing the module, and for this purpose the C<Devel::SelfStubber> | |
f8881bd9 AD |
295 | module is available. However this does require the extra step of ensuring |
296 | that the stubs are in the module. If this is done I strongly recommend | |
297 | that this is done BEFORE releasing the module - it should NOT be done | |
298 | at install time in general. | |
299 | ||
300 | =head1 Multiple packages and fully qualified subroutine names | |
301 | ||
302 | Subroutines in multiple packages within the same file are supported - but you | |
463e8aa9 | 303 | should note that this requires exporting the C<SelfLoader::AUTOLOAD> to |
f8881bd9 | 304 | every package which requires it. This is done automatically by the |
463e8aa9 | 305 | B<SelfLoader> when it first loads the subs into the cache, but you should |
306 | really specify it in the initialization before the C<__DATA__> by putting | |
f8881bd9 AD |
307 | a 'use SelfLoader' statement in each package. |
308 | ||
309 | Fully qualified subroutine names are also supported. For example, | |
310 | ||
311 | __DATA__ | |
312 | sub foo::bar {23} | |
313 | package baz; | |
314 | sub dob {32} | |
315 | ||
463e8aa9 | 316 | will all be loaded correctly by the B<SelfLoader>, and the B<SelfLoader> |
f8881bd9 | 317 | will ensure that the packages 'foo' and 'baz' correctly have the |
463e8aa9 | 318 | B<SelfLoader> C<AUTOLOAD> method when the data after C<__DATA__> is first |
319 | parsed. | |
f8881bd9 AD |
320 | |
321 | =cut |