detypo #5411 continues: Sun grep doesn't have -e.

[perl5.git] / cygwin / Makefile.SHs

# This file is read by Makefile.SH to produce rules for $(LIBPERL) (and
# some additional rules as well).

# Rerun `sh Makefile.SH; make depend' after making any change.

# Additional rules supported: libperls.a (for static linking),
# ld2, perlld (dynamic linking tools)
#

#! /bin/sh
case $CONFIG in
'')
	if test -f config.sh; then TOP=.;
	elif test -f ../config.sh; then TOP=..;
	elif test -f ../../config.sh; then TOP=../..;
	elif test -f ../../../config.sh; then TOP=../../..;
	elif test -f ../../../../config.sh; then TOP=../../../..;
	else
		echo "Can't find config.sh."; exit 1
	fi
	. $TOP/config.sh
	;;
esac

addtopath=`pwd`
$spitshell >>Makefile <<!GROK!THIS!

cygwin.c: cygwin/cygwin.c
	\$(LNS) cygwin/cygwin.c

# shell script feeding perlld to decent perl
ld2: $& Makefile perlld ${src}/cygwin/ld2.in
	@echo "extracting ld2 (with variable substitutions)"
	@$sed s,@buildpath@,$addtopath,g <${src}/cygwin/ld2.in >ld2
	@echo "installing ld2 into $installbin"
# install is included in Cygwin distributions, and we make a note of th
# requirement in the README.cygwin file. However, let's give them
# a warning.
	@install -c -m 755 ld2 ${installbin}/ld2
	@if test ! -f  ${installbin}/ld2; then \
		echo "*************************************************" ; \
		echo "Make will probably fail in a few more steps." ; \
		echo "When it does, copy \"ld2\" to a directory in" ; \
		echo "your path, other than \".\"." ; \
		echo "\"/usr/local/bin\" or something similar will do." ; \
		echo "Then restart make." ; \
		echo "*************************************************" ; \
	fi

!GROK!THIS!

$spitshell >>Makefile <<!GROK!THIS!

# perlld parameters
#
# this one is pretty mandatory
DLLWRAP = 'dllwrap'

# following are optional.
WRAPDRIVER = gcc
DLLTOOL = dlltool
EXPORT_ALL = 1

# if some of extensions are empty,
# no corresponding output will be done.
# most probably, you'd like to have an export library
DEF_EXT = .def
EXP_EXT = .exp

perlld: $& Makefile ${src}/cygwin/perlld.in
	@echo "extracting perlld (with variable substitutions)"
	@$sed -e s,@CC@,\${CC}, -e s,@DLLWRAP@,\${DLLWRAP},g \\
	-e s,@WRAPDRIVER@,\${WRAPDRIVER},g -e s,@DLLTOOL@,\${DLLTOOL},g \\
	-e s,@AS@,\${AS},g -e s,@EXPORT_ALL@,\${EXPORT_ALL},g \\
	-e s,@DEF_EXT@,\${DEF_EXT},g -e s,@EXP_EXT@,\${EXP_EXT},g \\
	-e s,@LIB_EXT@,\${LIB_EXT},g \\
	${src}/cygwin/perlld.in >perlld

!GROK!THIS!

# make sure that all library names are not malformed
libperl=`echo $libperl|sed -e s,\\\..*,,`

# it would be nice to allow dll to have any name,
# but for now i insist on 'lib<whatever>.dll'
if ( ! ( echo $libperl | grep '^lib' >/dev/null ) )
then
  libperl=lib$libperl
fi
linklibperl=-l`echo $libperl|sed -e s,^lib,,`

$spitshell >>Makefile <<!GROK!THIS!
LIBPERL = $libperl
LLIBPERL= $linklibperl
CLDFLAGS= -L$addtopath $ldflags
CAT = $cat
AWK = $awk
!GROK!THIS!

case "$useshrplib" in
true)
	$spitshell >>Makefile <<'!NO!SUBS!'
cwobj = $(obj)

# override default rule (NB: make croaks!) to force dll usage
perlmain$(OBJ_EXT): perlmain.c
	$(CCCMD) $(PLDLFLAGS) -DUSEIMPORTLIB $*.c

# library used to make statically linked executables
# miniperl is linked against it to avoid libperl.dll locking
$(LIBPERL)s$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj)
	$(AR) rcu $@ perl$(OBJ_EXT) $(cwobj)

# dll and import library
$(LIBPERL)$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj) ld2
	$(LDLIBPTH) ld2 $(SHRPLDFLAGS) -o $(LIBPERL)$(DLSUFFIX) \
	perl$(OBJ_EXT) $(cwobj) $(libs)

# How to build executables.

# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.

miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)s$(LIB_EXT) opmini$(OBJ_EXT)
	$(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL)s $(libs)
	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest

!NO!SUBS!
	;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
cwobj = $(obj)

# perl library
$(LIBPERL)$(LIB_EXT): $& perl$(OBJ_EXT) $(cwobj)
	$(AR) rcu $@ perl$(OBJ_EXT) $(cwobj)

# How to build executables.

# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.

miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) opmini$(OBJ_EXT)
	$(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest

!NO!SUBS!
	;;
esac

# libperl.a is _the_ library both in dll and static cases
# $(LIBPERL)$(LIB_EXT) expands to this name dependless of build model
#
$spitshell >>Makefile <<'!NO!SUBS!'

opmini$(OBJ_EXT) : op.c
	$(CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB -o opmini$(OBJ_EXT) op.c

perl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
	$(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
	$(SHRPENV) $(LDLIBPTH) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
	$(SHRPENV) $(LDLIBPTH) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL)$(LIB_EXT) $(DYNALOADER) $(static_ext) ext.libs
	$(SHRPENV) $(LDLIBPTH) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

!NO!SUBS!

# suid perl is removed - i've never seen suid scripts for win32

##############################################
# additional targets

$spitshell >>Makefile <<'!NO!SUBS!'

DIST_DIRECTORY = .dist

distdir: miniperl
	-mkdir $(DIST_DIRECTORY)
	./miniperl '-MExtUtils::Manifest' \
	-e "ExtUtils::Manifest::manicopy(ExtUtils::Manifest::maniread(),'$(DIST_DIRECTORY)')"

!NO!SUBS!