https://perl5.git.perl.org / perl5.git / blame
| Commit | Line | Data |
|---|---|---|
| 8ed6d636 VK |
1 | #! /bin/sh |
| 2 | ||
| 3 | # This file is used to create generic Makefile for cross-compile | |
| 4 | # (borrowed from Makefile.SH) | |
| 5 | # (now only small changes are done to establish cross-compilation) | |
| 6 | # miniperl removed from here, as this is built on HOST | |
| 7 | ||
| 8 | Makefile=Makefile-cross-$CROSS_NAME | |
| 9 | ||
| 10 | . Cross/config-${CROSS_NAME}.sh | |
| 11 | ||
| 12 | # H.Merijn Brand [17 Feb 2004] | |
| 13 | # This comment is just to ensure that Configure will find variables that | |
| 14 | # are removed/replaced in patches on blead, but are still needed in the | |
| 15 | # 5.8.x, 5.6.x and 5.005.x maintainance tracks. | |
| 16 | # metaconfig -m will scan all .SH files on this level (not deeper), and | |
| 17 | # not in x2p and other subfolders. This file is as good as any .SH | |
| 18 | # patch references | |
| 19 | # #22227 $baserev | |
| 20 | # #22302 $yacc $byacc | |
| 21 | ||
| 22 | # H.Merijn Brand [30 Oct 2004] | |
| 23 | # Mentioned for the same reason for future reference | |
| 24 | # #23434 $d_strlcat $d_strlcpy | |
| 25 | ||
| 26 | : This forces SH files to create target in same directory as SH file. | |
| 27 | : This is so that make depend always knows where to find SH derivatives. | |
| 28 | case "$0" in | |
| 29 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; | |
| 30 | esac | |
| 31 | ||
| 8ed6d636 VK |
32 | linklibperl='$(LIBPERL)' |
| 33 | shrpldflags='$(LDDLFLAGS)' | |
| 34 | ldlibpth='' | |
| 35 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' | |
| 36 | case "$useshrplib" in | |
| 37 | true) | |
| 38 | # Prefix all runs of 'miniperl' and 'perl' with | |
| 39 | # $ldlibpth so that ./perl finds *this* shared libperl. | |
| 40 | case "$LD_LIBRARY_PATH" in | |
| 41 | '') | |
| 42 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; | |
| 43 | *) | |
| 44 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; | |
| 45 | esac | |
| 46 | ||
| 47 | pldlflags="$cccdlflags" | |
| 3b333d01 | 48 | static_ldflags='' |
| 8ed6d636 VK |
49 | case "${osname}${osvers}" in |
| 50 | next4*) | |
| 51 | ld=libtool | |
| 52 | lddlflags="-dynamic -undefined warning -framework System \ | |
| 53 | -compatibility_version 1 -current_version $patchlevel \ | |
| 54 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" | |
| 55 | ;; | |
| 56 | rhapsody*|darwin*) | |
| 57 | shrpldflags="${ldflags} -dynamiclib \ | |
| 58 | -compatibility_version \ | |
| 59 | ${api_revision}.${api_version}.${api_subversion} \ | |
| 60 | -current_version \ | |
| 61 | ${revision}.${patchlevel}.${subversion} \ | |
| 62 | -install_name \$(shrpdir)/\$@" | |
| 63 | ;; | |
| 64 | cygwin*) | |
| 65 | linklibperl="-lperl" | |
| 66 | ;; | |
| 67 | sunos*) | |
| 68 | linklibperl="-lperl" | |
| 69 | ;; | |
| 70 | netbsd*|freebsd[234]*|openbsd*|dragonfly*) | |
| 71 | linklibperl="-L. -lperl" | |
| 72 | ;; | |
| 73 | interix*) | |
| 74 | linklibperl="-L. -lperl" | |
| 75 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" | |
| 76 | ;; | |
| 77 | linux*) | |
| 78 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
| 79 | ;; | |
| 80 | aix*) | |
| 81 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" | |
| 82 | case "$osvers" in | |
| 83 | 3*) shrpldflags="$shrpldflags -e _nostart" | |
| 84 | ;; | |
| 85 | *) shrpldflags="$shrpldflags -b noentry" | |
| 86 | ;; | |
| 87 | esac | |
| 88 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
| 89 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" | |
| 90 | ;; | |
| 91 | hpux*) | |
| 92 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" | |
| 93 | ;; | |
| 94 | os390*) | |
| 95 | shrpldflags='-W l,XPLINK,dll' | |
| 96 | linklibperl='libperl.x' | |
| 97 | DPERL_EXTERNAL_GLOB='' | |
| 98 | ;; | |
| 99 | esac | |
| 100 | case "$ldlibpthname" in | |
| 101 | '') ;; | |
| 102 | *) | |
| 103 | case "$osname" in | |
| 104 | os2) | |
| 105 | ldlibpth='' | |
| 106 | ;; | |
| 107 | *) | |
| 108 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" | |
| 109 | ;; | |
| 110 | esac | |
| 111 | # Strip off any trailing :'s | |
| 112 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` | |
| 113 | ;; | |
| 114 | esac | |
| 115 | ||
| 116 | case "$ldlibpth" in | |
| 117 | # Protect any spaces | |
| 118 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; | |
| 119 | esac | |
| 120 | ||
| 121 | case "$osname" in | |
| 122 | linux) | |
| 123 | # If there is a pre-existing $libperl from a previous | |
| 124 | # installation, Linux needs to use LD_PRELOAD to | |
| 125 | # override the LD_LIBRARY_PATH setting. See the | |
| 126 | # INSTALL file, under "Building a shared perl library". | |
| 127 | # If there is no pre-existing $libperl, we don't need | |
| 128 | # to do anything further. | |
| 129 | if test -f $archlib/CORE/$libperl; then | |
| 130 | rm -f preload | |
| 131 | cat <<'EOT' > preload | |
| 132 | #! /bin/sh | |
| 133 | lib=$1 | |
| 134 | shift | |
| 135 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" | |
| 136 | exec "$@" | |
| 137 | EOT | |
| 138 | chmod 755 preload | |
| 139 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" | |
| 140 | fi | |
| 141 | ;; | |
| 142 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" | |
| 143 | ;; | |
| 144 | esac | |
| 145 | ||
| 146 | ;; | |
| 147 | ||
| 148 | *) pldlflags='' | |
| 3b333d01 | 149 | static_ldflags='CCCDLFLAGS=' |
| 8ed6d636 VK |
150 | ;; |
| 151 | esac | |
| 152 | ||
| 153 | : Prepare dependency lists for Makefile. | |
| 154 | dynamic_list=' ' | |
| 155 | extra_dep='' | |
| 156 | for f in $dynamic_ext; do | |
| 157 | : the dependency named here will never exist | |
| 158 | base=`echo "$f" | sed 's/.*\///'` | |
| 159 | this_target="lib/auto/$f/$base.$dlext" | |
| 160 | dynamic_list="$dynamic_list $this_target" | |
| 161 | ||
| 162 | : Parallel makes reveal that we have some interdependencies | |
| 163 | case $f in | |
| 164 | Math/BigInt/FastCalc) extra_dep="$extra_dep | |
| 165 | $this_target: lib/auto/List/Util/Util.$dlext" ;; | |
| 166 | Unicode/Normalize) extra_dep="$extra_dep | |
| 167 | $this_target: uni.data" ;; | |
| 168 | esac | |
| 169 | done | |
| 170 | ||
| 171 | static_list=' ' | |
| 172 | for f in $static_ext; do | |
| 173 | base=`echo "$f" | sed 's/.*\///'` | |
| 174 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" | |
| 175 | done | |
| 176 | ||
| 177 | nonxs_list=' ' | |
| 178 | for f in $nonxs_ext; do | |
| 179 | base=`echo "$f" | sed 's/.*\///'` | |
| 180 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" | |
| 181 | done | |
| 182 | ||
| 183 | echo "Extracting $Makefile (with variable substitutions)" | |
| 184 | $spitshell >$Makefile <<!GROK!THIS! | |
| 185 | # $Makefile.SH | |
| 186 | # This file is derived from $Makefile.SH. Any changes made here will | |
| 187 | # be lost the next time you run Configure. | |
| 188 | # $Makefile is used to generate $firstmakefile. The only difference | |
| 189 | # is that $firstmakefile has the dependencies filled in at the end. | |
| 190 | ||
| 191 | CC = $cc | |
| 192 | LD = $ld | |
| 193 | ||
| 194 | LDFLAGS = $ldflags | |
| 195 | CLDFLAGS = $ldflags | |
| 196 | ||
| 197 | mallocsrc = $mallocsrc | |
| 198 | mallocobj = $mallocobj | |
| 199 | madlysrc = $madlysrc | |
| 200 | madlyobj = $madlyobj | |
| 201 | LNS = $lns | |
| 202 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? | |
| 203 | CPS = $cp | |
| 204 | RMS = rm -f | |
| 205 | ranlib = $ranlib | |
| 206 | ||
| 207 | # The following are mentioned only to make metaconfig include the | |
| 208 | # appropriate questions in Configure. If you want to change these, | |
| 209 | # edit config.sh instead, or specify --man1dir=/wherever on | |
| 210 | # installman commandline. | |
| 211 | bin = $installbin | |
| 212 | scriptdir = $scriptdir | |
| 213 | shrpdir = $archlibexp/CORE | |
| 214 | privlib = $installprivlib | |
| 215 | man1dir = $man1dir | |
| 216 | man1ext = $man1ext | |
| 217 | man3dir = $man3dir | |
| 218 | man3ext = $man3ext | |
| 219 | ||
| 220 | # The following are used to build and install shared libraries for | |
| 221 | # dynamic loading. | |
| 222 | LDDLFLAGS = $lddlflags | |
| 223 | SHRPLDFLAGS = $shrpldflags | |
| 224 | CCDLFLAGS = $ccdlflags | |
| 225 | DLSUFFIX = .$dlext | |
| 226 | PLDLFLAGS = $pldlflags | |
| 227 | LIBPERL = $libperl | |
| 228 | LLIBPERL= $linklibperl | |
| 229 | SHRPENV = $shrpenv | |
| 230 | ||
| 231 | # Static targets are ordinarily built without CCCDLFLAGS. However, | |
| 232 | # if building a shared libperl.so that might later be linked into | |
| 233 | # another application, then it might be appropriate to also build static | |
| 234 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC | |
| 3b333d01 NC |
235 | # for GNU cc). |
| 236 | STATIC_LDFLAGS = $static_ldflags | |
| 8ed6d636 VK |
237 | |
| 238 | # The following is used to include the current directory in | |
| 239 | # the dynamic loader path you are building a shared libperl. | |
| 240 | LDLIBPTH = $ldlibpth | |
| 241 | ||
| 242 | dynamic_ext = $dynamic_list | |
| 243 | static_ext = $static_list | |
| 244 | nonxs_ext = $nonxs_list | |
| 245 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) | |
| 246 | DYNALOADER = DynaLoader\$(OBJ_EXT) | |
| 247 | ||
| 248 | libs = $perllibs $cryptlib | |
| 249 | ||
| cc69b689 | 250 | public = perl\$(EXE_EXT) utilities translators |
| 8ed6d636 VK |
251 | |
| 252 | shellflags = $shellflags | |
| 253 | ||
| 254 | # This is set to MAKE=$make if your $make command doesn't | |
| 255 | # do it for you. | |
| 256 | $make_set_make | |
| 257 | ||
| 258 | # Mention $gmake here so it gets probed for by Configure. | |
| 259 | ||
| 260 | # These variables may need to be manually set for non-Unix systems. | |
| 261 | AR = $full_ar | |
| 262 | EXE_EXT = $_exe | |
| 263 | LIB_EXT = $_a | |
| 264 | OBJ_EXT = $_o | |
| 265 | PATH_SEP = $p_ | |
| 266 | ||
| 267 | # If you're going to use valgrind and it can't be invoked as plain valgrind | |
| 268 | # then you'll need to change this, or override it on the make command line. | |
| 269 | VALGRIND=valgrind | |
| 270 | ||
| 271 | FIRSTMAKEFILE = $firstmakefile | |
| 272 | ||
| 273 | # Any special object files needed by this architecture, e.g. os2/os2.obj | |
| 274 | ARCHOBJS = $archobjs | |
| 275 | ||
| 276 | .SUFFIXES: .c \$(OBJ_EXT) .i .s | |
| 277 | ||
| 278 | # grrr | |
| 279 | SHELL = $sh | |
| 280 | ||
| 281 | # how to tr(anslate) newlines | |
| 282 | TRNL = '$trnl' | |
| 283 | ||
| 284 | OPTIMIZE = $optimize | |
| 285 | ||
| 286 | EXTRAS = $extras | |
| 287 | ||
| 288 | INSTALLPREFIXEXP = $prefix | |
| 289 | ||
| 290 | !GROK!THIS! | |
| 291 | # not used by Makefile but by installperl; | |
| 292 | # mentioned here so that metaconfig picks these up | |
| 293 | # $installusrbinperl | |
| 294 | # $versiononly | |
| 295 | ||
| 296 | case "${osname}:${osvers}" in | |
| 297 | darwin:*) | |
| 298 | $spitshell >>$Makefile <<EOF | |
| 299 | ||
| 300 | # Your locales are broken (osname $osname, osvers $osvers) | |
| 301 | # and to avoid the numerous | |
| 302 | # perl: warning: Setting locale failed. | |
| 303 | # warnings during the build process we reset the locale variables. | |
| 304 | ||
| 305 | LC_ALL=C | |
| 306 | LANG=C | |
| 307 | LANGUAGE=C | |
| 308 | EOF | |
| 309 | ;; | |
| 310 | esac | |
| 311 | ||
| 312 | $spitshell >>$Makefile <<!GROK!THIS! | |
| 313 | CROSS_NAME = ${CROSS_NAME} | |
| 314 | CROSS_LIB = xlib/${CROSS_NAME} | |
| 315 | ||
| 316 | CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` | |
| 317 | ||
| 318 | CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` | |
| 319 | ||
| 320 | !GROK!THIS! | |
| 321 | ||
| 322 | ## In the following dollars and backticks do not need the extra backslash. | |
| 323 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 324 | ||
| 608969de | 325 | CONFIGPM = xlib/$(CROSS_NAME)/Config.pm |
| 8ed6d636 VK |
326 | |
| 327 | private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod | |
| 328 | ||
| 329 | shextract = Makefile cflags config.h makeaperl makedepend \ | |
| 330 | makedir myconfig writemain pod/Makefile | |
| 331 | ||
| 332 | # Files to be built with variable substitution after miniperl is | |
| 333 | # available. Dependencies handled manually below (for now). | |
| 334 | ||
| 335 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ | |
| 336 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL | |
| 337 | ||
| 338 | # lib/lib.pm is not listed here because it has a rule of its own. | |
| 339 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ | |
| 340 | pod/pod2usage pod/podchecker pod/podselect | |
| 341 | ||
| 342 | addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct | |
| 343 | ||
| 344 | # Unicode data files generated by mktables | |
| 3df51b85 KW |
345 | unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \ |
| 346 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl \ | |
| 3e344d15 | 347 | lib/unicore/Heavy.pl lib/unicore/mktables.lst |
| 8ed6d636 VK |
348 | |
| 349 | # Directories of Unicode data files generated by mktables | |
| 350 | unidatadirs = lib/unicore/To lib/unicore/lib | |
| 351 | ||
| 352 | h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h | |
| 353 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h | |
| 354 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h | |
| 355 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h | |
| 356 | h5 = utf8.h warnings.h | |
| 357 | h = $(h1) $(h2) $(h3) $(h4) $(h5) | |
| 358 | ||
| 359 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c | |
| 360 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c | |
| 48462a74 | 361 | c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c |
| 8ed6d636 VK |
362 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c |
| 363 | c5 = $(madlysrc) $(mallocsrc) | |
| 364 | ||
| 365 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c | |
| 366 | ||
| 367 | obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) | |
| 368 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) | |
| 48462a74 | 369 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) |
| 8ed6d636 VK |
370 | |
| 371 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) | |
| 372 | ||
| 373 | lintflags = \ | |
| 374 | -b \ | |
| 375 | -n \ | |
| 376 | -p \ | |
| 377 | -Ncheck=%all \ | |
| 378 | -Nlevel=4 \ | |
| 379 | -errchk=parentheses \ | |
| 380 | -errhdr=%all \ | |
| 381 | -errfmt=src \ | |
| 382 | -errtags \ | |
| 383 | -erroff=E_ASSIGN_NARROW_CONV \ | |
| 384 | -erroff=E_BAD_PTR_CAST \ | |
| 385 | -erroff=E_BAD_PTR_CAST_ALIGN \ | |
| 386 | -erroff=E_BAD_PTR_INT_COMBINATION \ | |
| 387 | -erroff=E_BAD_SIGN_EXTEND \ | |
| 388 | -erroff=E_BLOCK_DECL_UNUSED \ | |
| 389 | -erroff=E_CASE_FALLTHRU \ | |
| 390 | -erroff=E_CONST_EXPR \ | |
| 391 | -erroff=E_CONSTANT_CONDITION \ | |
| 392 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ | |
| 393 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ | |
| 394 | -erroff=E_EXPR_NULL_EFFECT \ | |
| 395 | -erroff=E_FALSE_LOGICAL_EXPR \ | |
| 396 | -erroff=E_INCL_NUSD \ | |
| 397 | -erroff=E_LOOP_EMPTY \ | |
| 398 | -erroff=E_MAIN_PARAM \ | |
| 399 | -erroff=E_POINTER_TO_OBJECT \ | |
| 400 | -erroff=E_PTRDIFF_OVERFLOW \ | |
| 401 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ | |
| 402 | -erroff=E_STATIC_UNUSED \ | |
| 403 | -erroff=E_TRUE_LOGICAL_EXPR | |
| 404 | ||
| 405 | splintflags = \ | |
| 406 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ | |
| 407 | -D__builtin_va_list=va_list \ | |
| 408 | -Dsigjmp_buf=jmp_buf \ | |
| 409 | -warnposix \ | |
| 410 | \ | |
| 411 | +boolint \ | |
| 412 | +charintliteral \ | |
| 413 | -fixedformalarray \ | |
| 414 | -mustfreefresh \ | |
| 415 | -nestedextern \ | |
| 416 | -predboolint \ | |
| 417 | -predboolothers \ | |
| 418 | -preproc \ | |
| 419 | -boolops \ | |
| 420 | -shadow \ | |
| 421 | -nullstate \ | |
| 422 | +longintegral \ | |
| 423 | +matchanyintegral \ | |
| 424 | -type \ | |
| 425 | \ | |
| 426 | +line-len 999 \ | |
| 427 | +weak | |
| 428 | ||
| 429 | splintfiles = $(c1) | |
| 430 | ||
| 431 | .c$(OBJ_EXT): | |
| 432 | $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c | |
| 433 | ||
| 434 | .c.i: | |
| 435 | $(CCCMDSRC) -E $*.c > $*.i | |
| 436 | ||
| 437 | .c.s: | |
| 438 | $(CCCMDSRC) -S $*.c | |
| 439 | ||
| 440 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make | |
| 441 | @echo " "; | |
| 442 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." | |
| 443 | ||
| 444 | .PHONY: all | |
| 445 | ||
| 446 | ||
| 447 | # This is now done by installman only if you actually want the man pages. | |
| 448 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; | |
| 449 | ||
| 450 | # Phony target to force checking subdirectories. | |
| 451 | # Apparently some makes require an action for the FORCE target. | |
| 452 | .PHONY: FORCE | |
| 453 | FORCE: | |
| 454 | @sh -c true | |
| 455 | !NO!SUBS! | |
| 456 | $spitshell >>$Makefile <<!GROK!THIS! | |
| 457 | ||
| 458 | # We do a copy of the op.c instead of a symlink because gcc gets huffy | |
| 459 | # if we have a symlink forest to another disk (it complains about too many | |
| 460 | # levels of symbolic links, even if we have only two) | |
| 461 | ||
| 462 | opmini.c: op.c | |
| 463 | \$(RMS) opmini.c | |
| 464 | \$(CPS) op.c opmini.c | |
| 465 | ||
| 466 | opmini\$(OBJ_EXT): opmini.c | |
| 467 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c | |
| 468 | ||
| 469 | globals\$(OBJ_EXT): | |
| 470 | ||
| 471 | !GROK!THIS! | |
| 472 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 473 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h | |
| 474 | $(CCCMD) $(PLDLFLAGS) $*.c | |
| 475 | ||
| 476 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) | |
| 477 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c | |
| 478 | ||
| 479 | !NO!SUBS! | |
| 480 | case "$osname" in | |
| 481 | cygwin) | |
| 482 | ;; # Let cygwin/Makefile.SHs do its work. | |
| 483 | *) | |
| 484 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 485 | perlmain$(OBJ_EXT): perlmain.c | |
| 486 | $(CCCMD) $(PLDLFLAGS) $*.c | |
| 487 | ||
| 488 | !NO!SUBS! | |
| 489 | ;; | |
| 490 | esac | |
| 491 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 492 | # The file ext.libs is a list of libraries that must be linked in | |
| 493 | # for static extensions, e.g. -lm -lgdbm, etc. The individual | |
| 494 | # static extension Makefile's add to it. | |
| 495 | ext.libs: $(static_ext) | |
| 496 | -@test -f ext.libs || touch ext.libs | |
| 497 | ||
| 498 | !NO!SUBS! | |
| 499 | ||
| 500 | # How to build libperl. This is still rather convoluted. | |
| 501 | # Load up custom Makefile.SH fragment for shared loading and executables: | |
| 502 | case "$osname" in | |
| 503 | *) | |
| 504 | Makefile_s="$osname/Makefile.SHs" | |
| 505 | ;; | |
| 506 | esac | |
| 507 | ||
| 508 | case "$osname" in | |
| 509 | aix) | |
| 510 | $spitshell >>$Makefile <<!GROK!THIS! | |
| 511 | LIBS = $perllibs | |
| 512 | # In AIX we need to change this for building Perl itself from | |
| 513 | # its earlier definition (which is for building external | |
| 514 | # extensions *after* Perl has been built and installed) | |
| 515 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` | |
| 516 | ||
| 517 | !GROK!THIS! | |
| 518 | case "$useshrplib" in | |
| 519 | define|true|[yY]*) | |
| 520 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 521 | ||
| 522 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) | |
| 523 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) | |
| 524 | ||
| 525 | $(LIBPERL_NONSHR): $(obj) | |
| 526 | $(RMS) $(LIBPERL_NONSHR) | |
| 527 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) | |
| 528 | ||
| 529 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) | |
| 530 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ | |
| 531 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) | |
| 532 | ||
| 533 | MINIPERLEXP = $(MINIPERL_NONSHR) | |
| 534 | ||
| 535 | LIBPERLEXPORT = perl.exp | |
| 536 | ||
| 537 | !NO!SUBS! | |
| 538 | ||
| 539 | ;; | |
| 540 | *) | |
| 541 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 542 | MINIPERLEXP = miniperl$(EXE_EXT) | |
| 543 | ||
| 544 | PERLEXPORT = perl.exp | |
| 545 | ||
| 546 | !NO!SUBS! | |
| 547 | ;; | |
| 548 | esac | |
| 549 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 550 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) | |
| 551 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp | |
| 552 | ||
| 553 | !NO!SUBS! | |
| 554 | ;; | |
| 555 | os2) | |
| 556 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 557 | MINIPERLEXP = miniperl | |
| 558 | ||
| 559 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map | |
| 560 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def | |
| 561 | ||
| 562 | !NO!SUBS! | |
| 563 | ;; | |
| 564 | esac | |
| 565 | ||
| 566 | if test -r $Makefile_s ; then | |
| 567 | . $Makefile_s | |
| 568 | $spitshell >>$Makefile <<!GROK!THIS! | |
| 569 | ||
| 570 | $Makefile: $Makefile_s | |
| 571 | !GROK!THIS! | |
| 572 | else | |
| 573 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 574 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) | |
| 575 | !NO!SUBS! | |
| 576 | case "$useshrplib" in | |
| 577 | true) | |
| 578 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 579 | rm -f $@ | |
| 580 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) | |
| 581 | !NO!SUBS! | |
| 582 | case "$osname" in | |
| 583 | aix) | |
| 584 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 585 | rm -f libperl$(OBJ_EXT) | |
| 586 | mv $@ libperl$(OBJ_EXT) | |
| 587 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) | |
| 588 | !NO!SUBS! | |
| 589 | ;; | |
| 590 | esac | |
| 591 | ;; | |
| 592 | *) | |
| 593 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 594 | rm -f $(LIBPERL) | |
| 595 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) | |
| 596 | @$(ranlib) $(LIBPERL) | |
| 597 | !NO!SUBS! | |
| 598 | ;; | |
| 599 | esac | |
| 600 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 601 | ||
| 602 | # How to build executables. | |
| 603 | ||
| 604 | # The $& notation tells Sequent machines that it can do a parallel make, | |
| 605 | # and is harmless otherwise. | |
| 606 | # The miniperl -w -MExporter line is a basic cheap test to catch errors | |
| 607 | # before make goes on to run preplibrary and then MakeMaker on extensions. | |
| 608 | # This is very handy because later errors are often caused by miniperl | |
| 609 | # build problems but that's not obvious to the novice. | |
| 610 | # The Module used here must not depend on Config or any extensions. | |
| 611 | ||
| 612 | !NO!SUBS! | |
| 613 | ||
| 614 | ||
| 615 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 616 | ||
| 617 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
| 618 | -@rm -f miniperl.xok | |
| 619 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
| 620 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
| 621 | ||
| 622 | # Purify/Quantify Perls. | |
| 623 | ||
| 624 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
| 625 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
| 626 | ||
| 627 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
| 628 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
| 629 | ||
| 630 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
| 631 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
| 632 | ||
| 633 | # Valgrind perl (currently Linux only) | |
| 634 | ||
| 635 | perl.valgrind.config: config.sh | |
| 636 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
| 637 | @$(MAKE) perl.config.dashg | |
| 638 | @echo "Checking usemymalloc='n' in config.sh..." | |
| 639 | @grep "^usemymalloc=" config.sh | |
| 640 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
| 641 | @echo "And of course you have to have valgrind..." | |
| 642 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 | |
| 643 | ||
| 644 | # Third Degree Perl (Tru64 only) | |
| 645 | ||
| 646 | perl.config.dashg: | |
| 647 | @echo "Checking optimize='-g' in config.sh..." | |
| 648 | @grep "^optimize=" config.sh | |
| 649 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 | |
| 650 | ||
| 651 | perl.third.config: config.sh | |
| 652 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
| 653 | @$(MAKE) perl.config.dashg | |
| 654 | @echo "Checking usemymalloc='n' in config.sh..." | |
| 655 | @grep "^usemymalloc=" config.sh | |
| 656 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
| 657 | ||
| 658 | perl.third: /usr/bin/atom perl.third.config perl | |
| 659 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl | |
| 660 | @echo "Now you may run perl.third and then study perl.3log." | |
| 661 | ||
| 662 | # Pixie Perls (Tru64 and IRIX only) | |
| 663 | ||
| 664 | perl.pixie.config: config.sh | |
| 665 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." | |
| 666 | @$(MAKE) perl.config.dashg | |
| 667 | ||
| 668 | perl.pixie.atom: /usr/bin/atom perl | |
| 669 | atom -tool pixie -L. -all -toolargs="-quiet" perl | |
| 670 | ||
| 671 | perl.pixie.irix: perl | |
| 672 | pixie perl | |
| 673 | ||
| 674 | perl.pixie: /usr/bin/pixie perl.pixie.config perl | |
| 675 | if test -x /usr/bin/atom; then \ | |
| 676 | $(MAKE) perl.pixie.atom; \ | |
| 677 | else \ | |
| 678 | $(MAKE) perl.pixie.irix; \ | |
| 679 | fi | |
| 680 | @echo "Now you may run perl.pixie and then run pixie." | |
| 681 | ||
| 682 | # Gprof Perl | |
| 683 | ||
| 684 | perl.config.dashpg: | |
| 685 | @echo "Checking optimize='-pg' in config.sh..." | |
| 686 | @grep "^optimize=" config.sh | |
| 687 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 | |
| 688 | ||
| 689 | perl.gprof.config: config.sh | |
| 690 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." | |
| 691 | @$(MAKE) perl.config.dashpg | |
| 692 | ||
| 693 | perl.gprof: /usr/bin/gprof perl.gprof.config | |
| 694 | @-rm -f perl | |
| 695 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl | |
| 696 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." | |
| 697 | ||
| 698 | # Gcov Perl | |
| 699 | ||
| 700 | perl.config.gcov: | |
| 701 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." | |
| 702 | @echo "Checking gccversion in config.sh..." | |
| 703 | @grep "^gccversion=" config.sh | |
| 704 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 | |
| 705 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." | |
| 706 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." | |
| 707 | @grep "^ccflags=" config.sh | |
| 708 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 | |
| 709 | ||
| 710 | perl.gcov: perl.config.gcov | |
| 711 | @-rm -f perl | |
| 712 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl | |
| 713 | @echo "Now you may run perl.gcov and then run gcov some.c." | |
| 714 | ||
| 715 | # Microperl. This is just a convenience thing if one happens to | |
| 716 | # build also the full Perl and therefore the real big Makefile: | |
| 717 | # usually one should manually explicitly issue the below command. | |
| 718 | ||
| 719 | .PHONY: microperl | |
| 720 | microperl: | |
| 721 | $(MAKE) -f Makefile.micro | |
| 722 | ||
| 8ed6d636 VK |
723 | !NO!SUBS! |
| 724 | ||
| 725 | fi | |
| 726 | ||
| 727 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 728 | ||
| 8ed6d636 | 729 | .PHONY: preplibrary |
| ebca06e9 | 730 | preplibrary: miniperl $(CONFIGPM) lib/lib.pm lib/re.pm $(PREPLIBRARY_LIBPERL) |
| 8ed6d636 VK |
731 | |
| 732 | .PHONY: makeppport | |
| 733 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) | |
| 734 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport | |
| 735 | ||
| 736 | $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary | |
| 608969de VK |
737 | $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) |
| 738 | cp *.h $(CROSS_LIB)/ | |
| 739 | cp ext/re/re.pm $(LIBDIR)/ | |
| 740 | ||
| 741 | $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h | |
| 8ed6d636 VK |
742 | |
| 743 | lib/re.pm: ext/re/re.pm | |
| 744 | @-rm -f $@ | |
| 745 | cp ext/re/re.pm lib/re.pm | |
| 746 | ||
| 747 | $(plextract): miniperl $(CONFIGPM) x2p/s2p | |
| 748 | @-rm -f $@ | |
| 749 | $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL | |
| 750 | ||
| 751 | lib/lib.pm: miniperl $(CONFIGPM) | |
| 752 | @-rm -f $@ | |
| 753 | $(LDLIBPTH) ./miniperl -Ilib -MCross lib/lib_pm.PL | |
| 754 | ||
| 755 | unidatafiles $(unidatafiles): uni.data | |
| 756 | ||
| 757 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables | |
| 3df51b85 KW |
758 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -P ../../pod -maketest -makelist -p |
| 759 | # Commented out so always runs, mktables looks at far more files than we | |
| 760 | # can in this makefile to decide if needs to run or not | |
| 761 | # touch uni.data | |
| 8ed6d636 VK |
762 | |
| 763 | extra.pods: miniperl | |
| 764 | -@test ! -f extra.pods || rm -f `cat extra.pods` | |
| 765 | -@rm -f extra.pods | |
| 766 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ | |
| 767 | nx=`echo $$x | sed -e "s/README\.//"`; \ | |
| 768 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ | |
| 769 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ | |
| 770 | done | |
| 771 | -@rm -f pod/perlvms.pod | |
| 772 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods | |
| 773 | -@rm -f pod/perldelta.pod | |
| 4d7c7898 | 774 | -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc |
| 8ed6d636 VK |
775 | |
| 776 | extras.make: perl$(EXE_EXT) | |
| 777 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` | |
| 778 | ||
| 779 | extras.test: perl$(EXE_EXT) | |
| 780 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` | |
| 781 | ||
| 782 | extras.install: perl$(EXE_EXT) | |
| 783 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` | |
| 784 | ||
| 785 | .PHONY: install install-strip install-all install-verbose install-silent \ | |
| 786 | no-install install.perl install.man install.html | |
| 787 | ||
| 788 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm | |
| 789 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta | |
| 790 | ||
| 791 | install-strip: | |
| 792 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" | |
| 793 | ||
| 794 | install install-all: | |
| 795 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" | |
| 796 | ||
| 797 | install-verbose: | |
| 798 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" | |
| 799 | ||
| 800 | install-silent: | |
| 801 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" | |
| 802 | ||
| 803 | no-install: | |
| 804 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" | |
| 805 | ||
| 806 | # Set this to an empty string to avoid an attempt of rebuild before install | |
| 807 | INSTALL_DEPENDENCE = all | |
| 808 | ||
| 809 | install.perl: $(INSTALL_DEPENDENCE) installperl | |
| 810 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) | |
| 811 | -@test ! -s extras.lst || $(MAKE) extras.install | |
| 812 | ||
| 813 | install.man: all installman | |
| 814 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) | |
| 815 | ||
| 816 | # XXX Experimental. Hardwired values, but useful for testing. | |
| 817 | # Eventually Configure could ask for some of these values. | |
| 818 | install.html: all installhtml | |
| 819 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. | |
| 820 | $(LDLIBPTH) ./perl installhtml \ | |
| 821 | --podroot=. --podpath=. --recurse \ | |
| 822 | --htmldir=$(privlib)/html \ | |
| 823 | --htmlroot=$(privlib)/html \ | |
| 824 | --splithead=pod/perlipc \ | |
| 825 | --splititem=pod/perlfunc \ | |
| 826 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ | |
| e2b41a3f | 827 | --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \ |
| 8ed6d636 VK |
828 | --verbose |
| 829 | ||
| 830 | ||
| 831 | # I now supply perly.c with the kits, so the following section is | |
| 832 | # used only if you force bison to run by saying | |
| 833 | # make regen_perly | |
| 834 | # You normally shouldn't remake perly.[ch]. | |
| 835 | ||
| 836 | .PHONY: regen_perly | |
| 837 | ||
| 838 | run_byacc: | |
| 839 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" | |
| 840 | ||
| 841 | # this outputs perly.h, perly.act and perly.tab | |
| 842 | regen_perly: | |
| 843 | perl regen_perly.pl | |
| 844 | ||
| 845 | # We don't want to regenerate perly.c and perly.h, but they might | |
| 846 | # appear out-of-date after a patch is applied or a new distribution is | |
| 847 | # made. | |
| 848 | perly.c: perly.y | |
| 849 | -@sh -c true | |
| 850 | ||
| 851 | perly.h: perly.y | |
| 852 | -@sh -c true | |
| 853 | ||
| 854 | # No compat3.sym here since and including the 5.004_50. | |
| 855 | # No interp.sym since 5.005_03. | |
| 856 | SYM = global.sym globvar.sym perlio.sym pp.sym | |
| 857 | ||
| 858 | SYMH = perlvars.h intrpvar.h | |
| 859 | ||
| 860 | CHMOD_W = chmod +w | |
| 861 | ||
| 862 | # The following files are generated automatically | |
| 8ed6d636 VK |
863 | # embed.pl: proto.h embed.h embedvar.h global.sym |
| 864 | # perlapi.h perlapi.c | |
| 865 | # [* embed.pl needs pp.sym generated by opcode.pl! *] | |
| 866 | # keywords.pl: keywords.h | |
| 867 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym | |
| 868 | # regcomp.pl: regnodes.h | |
| 869 | # warnings.pl: warnings.h lib/warnings.pm | |
| 870 | # The correct versions should be already supplied with the perl kit, | |
| 871 | # in case you don't have perl available. | |
| 872 | # To force them to be regenerated, run | |
| 873 | # perl regen.pl | |
| 874 | # with your existing copy of perl | |
| 875 | # (make regen_headers is kept for backwards compatibility) | |
| 876 | ||
| 877 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ | |
| 878 | embed.h embedvar.h global.sym \ | |
| 8ed6d636 VK |
879 | perlapi.h perlapi.c regnodes.h \ |
| 880 | warnings.h lib/warnings.pm | |
| 881 | ||
| 1e2f36ef | 882 | .PHONY: regen_headers regen_all |
| 8ed6d636 VK |
883 | |
| 884 | regen regen_headers: FORCE | |
| 885 | -perl regen.pl | |
| 886 | ||
| 1e2f36ef | 887 | regen_all: regen |
| 8ed6d636 VK |
888 | |
| 889 | .PHONY: manisort manicheck | |
| 890 | ||
| 891 | manisort: FORCE | |
| 892 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ | |
| 893 | LC_ALL=C sort -fdo MANIFEST MANIFEST) | |
| 894 | ||
| 895 | manicheck: FORCE | |
| 896 | perl Porting/manicheck | |
| 897 | ||
| 898 | # Extensions: | |
| 899 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will | |
| 900 | # automatically get built. There should ordinarily be no need to change | |
| 901 | # any of this part of makefile. | |
| 902 | # | |
| 903 | # The dummy dependency is a place holder in case $(dynamic_ext) or | |
| 904 | # $(static_ext) is empty. | |
| 905 | # | |
| 906 | # DynaLoader may be needed for extensions that use Makefile.PL. | |
| 907 | ||
| 908 | ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) | |
| 909 | ### if not exist $(AUTODIR) mkdir $(AUTODIR) | |
| 910 | ### cd $(EXTDIR)\$(*B) | |
| 911 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL | |
| 912 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL | |
| 913 | ### cd ..\..\win32 | |
| 914 | ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) | |
| 915 | ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) | |
| 916 | ### cd $(EXTDIR)\$(*B) | |
| 917 | ### $(XSUBPP) dl_win32.xs > $(*B).c | |
| 918 | ### cd ..\..\win32 | |
| 919 | ### | |
| 920 | ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs | |
| 921 | ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs | |
| 922 | ||
| 923 | ||
| 924 | ||
| 925 | $(DYNALOADER): preplibrary FORCE | |
| 3b333d01 | 926 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
| 8ed6d636 VK |
927 | |
| 928 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
| 3b333d01 | 929 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
| 8ed6d636 VK |
930 | |
| 931 | s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
| 3b333d01 | 932 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
| 8ed6d636 VK |
933 | |
| 934 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE | |
| 3b333d01 | 935 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| 8ed6d636 VK |
936 | !NO!SUBS! |
| 937 | ||
| 938 | $spitshell >>$Makefile <<EOF | |
| 939 | $extra_dep | |
| 940 | EOF | |
| 941 | ||
| 942 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
| 943 | ||
| 944 | .PHONY: printconfig | |
| 945 | printconfig: | |
| 946 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) | |
| 947 | ||
| 948 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ | |
| 949 | realclean _realcleaner clobber _clobber \ | |
| 6e2cec71 | 950 | distclean veryclean _verycleaner |
| 8ed6d636 | 951 | |
| 6e2cec71 | 952 | clean: _tidy _mopup |
| 8ed6d636 | 953 | |
| 6e2cec71 | 954 | realclean: _realcleaner _mopup |
| 8ed6d636 VK |
955 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" |
| 956 | ||
| 957 | _clobber: | |
| 958 | -@rm -f Cross/run-* Cross/to-* Cross/from-* | |
| 959 | rm -f config.sh cppstdin Policy.sh extras.lst | |
| 960 | ||
| 6e2cec71 | 961 | clobber: _realcleaner _mopup _clobber |
| 8ed6d636 VK |
962 | |
| 963 | distclean: clobber | |
| 964 | ||
| 965 | # Like distclean but also removes emacs backups and *.orig. | |
| 966 | veryclean: _verycleaner _mopup _clobber | |
| 967 | -@rm -f Obsolete Wanted | |
| 968 | ||
| 969 | # Do not 'make _mopup' directly. | |
| 970 | _mopup: | |
| 971 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) | |
| 972 | -rmdir .depending | |
| 973 | -@test -f extra.pods && rm -f `cat extra.pods` | |
| 974 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod | |
| 975 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o | |
| 976 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def | |
| 977 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap | |
| 978 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log | |
| 979 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs | |
| 980 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok | |
| ce0286c6 | 981 | -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
| cc69b689 | 982 | -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl |
| 8ed6d636 VK |
983 | -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old |
| 984 | -rm -f config.over | |
| 985 | ||
| 986 | # Do not 'make _tidy' directly. | |
| 987 | _tidy: | |
| 988 | -cd pod; $(LDLIBPTH) $(MAKE) clean | |
| 989 | -cd utils; $(LDLIBPTH) $(MAKE) clean | |
| 990 | -cd x2p; $(LDLIBPTH) $(MAKE) clean | |
| 991 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
| 3b333d01 | 992 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ |
| 8ed6d636 VK |
993 | done |
| 994 | ||
| 995 | _cleaner1: | |
| 996 | -cd os2; rm -f Makefile | |
| 997 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
| 998 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
| 999 | -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
| 3b333d01 NC |
1000 | -@if test -f miniperl$(EXE_EXT) ; then \ |
| 1001 | for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
| 1002 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ | |
| 1003 | done ; \ | |
| 1004 | else \ | |
| 1005 | sh $(CLEAN).sh ; \ | |
| 1006 | fi | |
| 1007 | rm -f realclean.sh veryclean.sh | |
| 8ed6d636 VK |
1008 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean |
| 1009 | ||
| 1010 | # Some systems do not support "?", so keep these files separate. | |
| 1011 | _cleaner2: | |
| 1012 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c | |
| 1013 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* | |
| 1014 | rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests | |
| 1015 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) | |
| 1016 | rm -rf $(addedbyconf) | |
| 1017 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old | |
| 1018 | rm -f $(private) | |
| 1019 | rm -rf $(unidatafiles) $(unidatadirs) | |
| 1020 | rm -rf lib/auto | |
| 1021 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists | |
| 1022 | rm -f h2ph.man pstruct | |
| 1023 | rm -rf .config | |
| 1024 | rm -f preload | |
| 1025 | rm -rf lib/Encode lib/Compress lib/Hash lib/re | |
| 1026 | rm -rf lib/IO/Compress lib/IO/Uncompress | |
| 1027 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c | |
| 1028 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) | |
| 1029 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) | |
| 1030 | -rmdir lib/B lib/Data | |
| 1031 | -rmdir lib/Filter/Util lib/IO/Socket | |
| 1032 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys | |
| 1033 | -rmdir lib/threads lib/XS | |
| 1034 | ||
| 1035 | _realcleaner: | |
| 1036 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean | |
| 1037 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
| 1038 | ||
| 1039 | _verycleaner: | |
| 1040 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean | |
| 1041 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
| 1042 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig | |
| 1043 | ||
| 1044 | .PHONY: lint | |
| 1045 | lint: $(c) | |
| 1046 | rm -f *.ln | |
| 1047 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) | |
| 1048 | ||
| 1049 | .PHONY: splint | |
| 1050 | splint: $(c) | |
| 1051 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) | |
| 1052 | ||
| 1053 | # Need to unset during recursion to go out of loop. | |
| 1054 | # The README below ensures that the dependency list is never empty and | |
| 1055 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. | |
| 1056 | ||
| 1057 | MAKEDEPEND = Makefile makedepend | |
| 1058 | ||
| 1059 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) | |
| 1060 | $(MAKE) depend MAKEDEPEND= | |
| 1061 | ||
| 1062 | config.h: config_h.SH config.sh | |
| 1063 | $(SHELL) config_h.SH | |
| 1064 | # TODO - improve following line | |
| 1065 | cp config.h $(CROSS_LIB)/ | |
| 1066 | ||
| 1067 | xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh | |
| 1068 | CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH | |
| 608969de | 1069 | #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
| 8ed6d636 | 1070 | cp xconfig.h $(CROSS_LIB)/ |
| 608969de | 1071 | cp xconfig.h $(CROSS_LIB)/config.h |
| 8ed6d636 VK |
1072 | |
| 1073 | # When done, touch perlmain.c so that it doesn't get remade each time. | |
| 1074 | .PHONY: depend | |
| 1075 | depend: makedepend | |
| 1076 | sh ./makedepend MAKE=$(MAKE) | |
| 1077 | - test -s perlmain.c && touch perlmain.c | |
| 1078 | cd x2p; $(MAKE) depend | |
| 1079 | ||
| 1080 | # Cannot postpone this until $firstmakefile is ready ;-) | |
| 1081 | makedepend: makedepend.SH config.sh | |
| 1082 | sh ./makedepend.SH | |
| 1083 | ||
| 1084 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ | |
| 1085 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ | |
| 1086 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ | |
| 1087 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ | |
| 1088 | test.third check.third utest.third ucheck.third test_notty.third \ | |
| 1089 | test.deparse test_notty.deparse test_harness test_harness_notty \ | |
| 1090 | minitest coretest test.taintwarn | |
| 1091 | ||
| 1092 | # Cannot delegate rebuilding of t/perl to make | |
| 1093 | # to allow interlaced test and minitest | |
| 1094 | ||
| 1095 | TESTFILE=TEST | |
| 1096 | ||
| 6e2cec71 | 1097 | _test_prep: |
| 8ed6d636 VK |
1098 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) |
| 1099 | ||
| 1100 | # Architecture-neutral stuff: | |
| 1101 | ||
| 1102 | test_prep_pre: preplibrary utilities $(nonxs_ext) | |
| 1103 | ||
| 1104 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) | |
| 1105 | PERL=./perl $(MAKE) _test_prep | |
| 1106 | ||
| 1107 | _test_tty: | |
| 1108 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty | |
| 1109 | ||
| 1110 | _test_notty: | |
| 1111 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) | |
| 1112 | ||
| 8ed6d636 VK |
1113 | # The second branch is for testing without a tty or controlling terminal, |
| 1114 | # see t/op/stat.t | |
| 1115 | _test: | |
| 1116 | if (true </dev/tty) >/dev/null 2>&1; then \ | |
| 1117 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ | |
| 1118 | else \ | |
| 1119 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ | |
| 1120 | fi | |
| 1121 | @echo "Ran tests" > t/rantests | |
| 1122 | ||
| 1123 | test check: test_prep | |
| 1124 | PERL=./perl $(MAKE) _test | |
| 1125 | ||
| 1126 | test_tty: test_prep | |
| 1127 | PERL=./perl $(MAKE) _test_tty | |
| 1128 | ||
| 1129 | test_notty: test_prep | |
| 1130 | PERL=./perl $(MAKE) _test_notty | |
| 1131 | ||
| 1132 | utest ucheck test.utf8 check.utf8: test_prep | |
| 1133 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test | |
| 1134 | ||
| 1135 | coretest: test_prep | |
| 1136 | PERL=./perl TEST_ARGS=-core $(MAKE) _test | |
| 1137 | ||
| 1138 | test-prep: test_prep | |
| 1139 | ||
| 1140 | test-tty: test_tty | |
| 1141 | ||
| 1142 | test-notty: test_notty | |
| 1143 | ||
| 1144 | # Torture testing | |
| 1145 | ||
| 1146 | test.torture torturetest: test_prep | |
| 1147 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test | |
| 1148 | ||
| 1149 | # Targets for UTF16 testing: | |
| 1150 | ||
| 1151 | minitest.utf16: minitest.prep | |
| 1152 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
| 1153 | && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
| 1154 | ||
| 1155 | test.utf16 check.utf16: test_prep | |
| 1156 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test | |
| 1157 | ||
| 1158 | utest.utf16 ucheck.utf16: test_prep | |
| 1159 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test | |
| 1160 | ||
| 1161 | # Targets for valgrind testing: | |
| 1162 | ||
| 1163 | test_prep.valgrind: test_prep perl.valgrind | |
| 1164 | PERL=./perl $(MAKE) _test_prep | |
| 1165 | ||
| 1166 | test.valgrind check.valgrind: test_prep perl.valgrind.config | |
| 1167 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test | |
| 1168 | ||
| 1169 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config | |
| 1170 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test | |
| 1171 | ||
| 1172 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config | |
| 1173 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty | |
| 1174 | ||
| 1175 | # Targets for Third Degree testing. | |
| 1176 | ||
| 1177 | test_prep.third: test_prep perl.third | |
| 1178 | PERL=./perl.third $(MAKE) _test_prep | |
| 1179 | ||
| 1180 | test.third check.third: test_prep.third perl.third | |
| 1181 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test | |
| 1182 | ||
| 1183 | utest.third ucheck.third: test_prep.third perl.third | |
| 1184 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test | |
| 1185 | ||
| 1186 | test_notty.third: test_prep.third perl.third | |
| 1187 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty | |
| 1188 | ||
| 1189 | # Targets for Deparse testing. | |
| 1190 | ||
| 1191 | test.deparse: test_prep | |
| 1192 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test | |
| 1193 | ||
| 1194 | test_notty.deparse: test_prep | |
| 1195 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty | |
| 1196 | ||
| 1197 | # Targets to run the test suite with -t | |
| 1198 | ||
| 1199 | test.taintwarn: test_prep | |
| 1200 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test | |
| 1201 | ||
| 1202 | minitest.prep: | |
| 1203 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ | |
| 1204 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) | |
| 1205 | @echo " " | |
| 1206 | @echo "You may see some irrelevant test failures if you have been unable" | |
| 1207 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." | |
| 1208 | @echo " " | |
| 1209 | ||
| 1210 | # Can't depend on lib/Config.pm because that might be where miniperl | |
| 1211 | # is crashing. | |
| 1212 | minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep | |
| 1213 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
| 1214 | && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
| 1215 | ||
| 1216 | # Test via harness | |
| 1217 | ||
| 1218 | test_harness: test_prep | |
| 1219 | PERL=./perl $(MAKE) TESTFILE=harness _test | |
| 1220 | ||
| 1221 | test_harness_notty: test_prep | |
| 1222 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test | |
| 1223 | ||
| 1224 | # Handy way to run perlbug -ok without having to install and run the | |
| 1225 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
| 1226 | # Please *don't* use this unless all tests pass. | |
| 1227 | # If you want to report test failures, use "make nok" instead. | |
| 1228 | ||
| 1229 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack | |
| 1230 | ||
| 1231 | ok: utilities | |
| 1232 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' | |
| 1233 | ||
| 1234 | okfile: utilities | |
| 1235 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok | |
| 1236 | ||
| 1237 | oknack: utilities | |
| 1238 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A | |
| 1239 | ||
| 1240 | okfilenack: utilities | |
| 1241 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A | |
| 1242 | ||
| 1243 | nok: utilities | |
| 1244 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' | |
| 1245 | ||
| 1246 | nokfile: utilities | |
| 1247 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok | |
| 1248 | ||
| 1249 | noknack: utilities | |
| 1250 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A | |
| 1251 | ||
| 1252 | nokfilenack: utilities | |
| 1253 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A | |
| 1254 | ||
| 1255 | .PHONY: clist hlist shlist pllist | |
| 1256 | ||
| 1257 | clist: $(c) | |
| 1258 | echo $(c) | tr ' ' $(TRNL) >.clist | |
| 1259 | ||
| 1260 | hlist: $(h) | |
| 1261 | echo $(h) | tr ' ' $(TRNL) >.hlist | |
| 1262 | ||
| 1263 | shlist: $(sh) | |
| 1264 | echo $(sh) | tr ' ' $(TRNL) >.shlist | |
| 1265 | ||
| 1266 | pllist: $(pl) | |
| 1267 | echo $(pl) | tr ' ' $(TRNL) >.pllist | |
| 1268 | ||
| 1269 | Makefile: Makefile.SH ./config.sh | |
| 1270 | $(SHELL) Makefile.SH | |
| 1271 | ||
| 1272 | .PHONY: distcheck | |
| 1273 | distcheck: FORCE | |
| 1274 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' | |
| 1275 | ||
| 1276 | .PHONY: elc | |
| 1277 | elc: emacs/cperl-mode.elc | |
| 1278 | ||
| 1279 | emacs/cperl-mode.elc: emacs/cperl-mode.el | |
| 1280 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el | |
| 1281 | ||
| 1282 | .PHONY: etags ctags tags | |
| 1283 | ||
| 1284 | etags: TAGS | |
| 1285 | ||
| 1286 | TAGS: emacs/cperl-mode.elc | |
| 1287 | sh emacs/ptags | |
| 1288 | ||
| 1289 | # Let's hope make will not go into an infinite loop on case-unsensitive systems | |
| 1290 | # This may also fail if . is in the head of the path, since perl will | |
| 1291 | # require -Ilib | |
| 1292 | tags: TAGS | |
| 1293 | perl emacs/e2ctags.pl TAGS > tags | |
| 1294 | ||
| 1295 | ctags: | |
| 1296 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h | |
| 1297 | ||
| 1298 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE | |
| 1299 | # If this runs make out of memory, delete /usr/include lines. | |
| 1300 | !NO!SUBS! | |
| 1301 | ||
| 1302 | $eunicefix $Makefile | |
| 1303 | case `pwd` in | |
| 1304 | *SH) | |
| 1305 | $rm -f ../$Makefile | |
| 1306 | $ln $Makefile ../$Makefile | |
| 1307 | ;; | |
| 1308 | esac | |
| 1309 | $rm -f $firstmakefile | |
| 1310 | ||
| 1311 | # Now do any special processing required before building. | |
| 1312 | ||
| 1313 | case "$ebcdic" in | |
| 1314 | define) | |
| 1315 | xxx='' | |
| 1316 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 | |
| 1317 | case "$osname" in | |
| 1318 | os390|posix-bc) | |
| 1319 | if cd x2p | |
| 1320 | then | |
| 1321 | rm -f y.tab.c y.tab.h | |
| 1322 | case "$osname" in | |
| 1323 | posix-bc) | |
| 1324 | # we are using two different yaccs in BS2000 Posix! | |
| 1325 | byacc a2p.y >/dev/null 2>&1 | |
| 1326 | ;; | |
| 1327 | *) # e.g. os390 | |
| 1328 | yacc a2p.y >/dev/null 2>&1 | |
| 1329 | ;; | |
| 1330 | esac | |
| 1331 | if cmp -s y.tab.c a2p.c | |
| 1332 | then | |
| 1333 | rm -f y.tab.c | |
| 1334 | else | |
| 1335 | echo "a2p.y -> a2p.c" >&2 | |
| 1336 | mv -f y.tab.c a2p.c | |
| 1337 | chmod u+w a2p.c | |
| 1338 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ | |
| 1339 | -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ | |
| 1340 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c | |
| 1341 | xxx="$xxx a2p.c" | |
| 1342 | fi | |
| 1343 | # In case somebody yacc -d:ed the a2p.y. | |
| 1344 | if test -f y.tab.h | |
| 1345 | then | |
| 1346 | if cmp -s y.tab.h a2p.h | |
| 1347 | then | |
| 1348 | rm -f y.tab.h | |
| 1349 | else | |
| 1350 | echo "a2p.h -> a2p.h" >&2 | |
| 1351 | mv -f y.tab.h a2p.h | |
| 1352 | xxx="$xxx a2p.h" | |
| 1353 | fi | |
| 1354 | fi | |
| 1355 | cd .. | |
| 1356 | fi | |
| 1357 | ;; | |
| 1358 | vmesa) | |
| 1359 | # Do nothing in VM/ESA. | |
| 1360 | ;; | |
| 1361 | *) | |
| 1362 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 | |
| 1363 | ;; | |
| 1364 | esac | |
| 1365 | case "$xxx" in | |
| 1366 | '') echo "No parser files were regenerated. That's okay." >&2 ;; | |
| 1367 | esac | |
| 1368 | ;; | |
| 1369 | esac | |
| 1370 | ||
| 1371 | # ex: set ts=8 sts=4 sw=4 noet: |