Commit | Line | Data |
---|---|---|
8ed6d636 VK |
1 | #! /bin/sh |
2 | ||
3 | # This file is used to create generic Makefile for cross-compile | |
4 | # (borrowed from Makefile.SH) | |
5 | # (now only small changes are done to establish cross-compilation) | |
6 | # miniperl removed from here, as this is built on HOST | |
7 | ||
8 | Makefile=Makefile-cross-$CROSS_NAME | |
9 | ||
10 | . Cross/config-${CROSS_NAME}.sh | |
11 | ||
12 | # H.Merijn Brand [17 Feb 2004] | |
13 | # This comment is just to ensure that Configure will find variables that | |
14 | # are removed/replaced in patches on blead, but are still needed in the | |
15 | # 5.8.x, 5.6.x and 5.005.x maintainance tracks. | |
16 | # metaconfig -m will scan all .SH files on this level (not deeper), and | |
17 | # not in x2p and other subfolders. This file is as good as any .SH | |
18 | # patch references | |
19 | # #22227 $baserev | |
20 | # #22302 $yacc $byacc | |
21 | ||
22 | # H.Merijn Brand [30 Oct 2004] | |
23 | # Mentioned for the same reason for future reference | |
24 | # #23434 $d_strlcat $d_strlcpy | |
25 | ||
26 | : This forces SH files to create target in same directory as SH file. | |
27 | : This is so that make depend always knows where to find SH derivatives. | |
28 | case "$0" in | |
29 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; | |
30 | esac | |
31 | ||
32 | case "$d_dosuid" in | |
33 | *define*) suidperl='suidperl' ;; | |
34 | *) suidperl='';; | |
35 | esac | |
36 | ||
37 | linklibperl='$(LIBPERL)' | |
38 | shrpldflags='$(LDDLFLAGS)' | |
39 | ldlibpth='' | |
40 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' | |
41 | case "$useshrplib" in | |
42 | true) | |
43 | # Prefix all runs of 'miniperl' and 'perl' with | |
44 | # $ldlibpth so that ./perl finds *this* shared libperl. | |
45 | case "$LD_LIBRARY_PATH" in | |
46 | '') | |
47 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; | |
48 | *) | |
49 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; | |
50 | esac | |
51 | ||
52 | pldlflags="$cccdlflags" | |
53 | static_target='static_pic' | |
54 | case "${osname}${osvers}" in | |
55 | next4*) | |
56 | ld=libtool | |
57 | lddlflags="-dynamic -undefined warning -framework System \ | |
58 | -compatibility_version 1 -current_version $patchlevel \ | |
59 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" | |
60 | ;; | |
61 | rhapsody*|darwin*) | |
62 | shrpldflags="${ldflags} -dynamiclib \ | |
63 | -compatibility_version \ | |
64 | ${api_revision}.${api_version}.${api_subversion} \ | |
65 | -current_version \ | |
66 | ${revision}.${patchlevel}.${subversion} \ | |
67 | -install_name \$(shrpdir)/\$@" | |
68 | ;; | |
69 | cygwin*) | |
70 | linklibperl="-lperl" | |
71 | ;; | |
72 | sunos*) | |
73 | linklibperl="-lperl" | |
74 | ;; | |
75 | netbsd*|freebsd[234]*|openbsd*|dragonfly*) | |
76 | linklibperl="-L. -lperl" | |
77 | ;; | |
78 | interix*) | |
79 | linklibperl="-L. -lperl" | |
80 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" | |
81 | ;; | |
82 | linux*) | |
83 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
84 | ;; | |
85 | aix*) | |
86 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" | |
87 | case "$osvers" in | |
88 | 3*) shrpldflags="$shrpldflags -e _nostart" | |
89 | ;; | |
90 | *) shrpldflags="$shrpldflags -b noentry" | |
91 | ;; | |
92 | esac | |
93 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
94 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" | |
95 | ;; | |
96 | hpux*) | |
97 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" | |
98 | ;; | |
99 | os390*) | |
100 | shrpldflags='-W l,XPLINK,dll' | |
101 | linklibperl='libperl.x' | |
102 | DPERL_EXTERNAL_GLOB='' | |
103 | ;; | |
104 | esac | |
105 | case "$ldlibpthname" in | |
106 | '') ;; | |
107 | *) | |
108 | case "$osname" in | |
109 | os2) | |
110 | ldlibpth='' | |
111 | ;; | |
112 | *) | |
113 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" | |
114 | ;; | |
115 | esac | |
116 | # Strip off any trailing :'s | |
117 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` | |
118 | ;; | |
119 | esac | |
120 | ||
121 | case "$ldlibpth" in | |
122 | # Protect any spaces | |
123 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; | |
124 | esac | |
125 | ||
126 | case "$osname" in | |
127 | linux) | |
128 | # If there is a pre-existing $libperl from a previous | |
129 | # installation, Linux needs to use LD_PRELOAD to | |
130 | # override the LD_LIBRARY_PATH setting. See the | |
131 | # INSTALL file, under "Building a shared perl library". | |
132 | # If there is no pre-existing $libperl, we don't need | |
133 | # to do anything further. | |
134 | if test -f $archlib/CORE/$libperl; then | |
135 | rm -f preload | |
136 | cat <<'EOT' > preload | |
137 | #! /bin/sh | |
138 | lib=$1 | |
139 | shift | |
140 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" | |
141 | exec "$@" | |
142 | EOT | |
143 | chmod 755 preload | |
144 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" | |
145 | fi | |
146 | ;; | |
147 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" | |
148 | ;; | |
149 | esac | |
150 | ||
151 | ;; | |
152 | ||
153 | *) pldlflags='' | |
154 | static_target='static' | |
155 | ;; | |
156 | esac | |
157 | ||
158 | : Prepare dependency lists for Makefile. | |
159 | dynamic_list=' ' | |
160 | extra_dep='' | |
161 | for f in $dynamic_ext; do | |
162 | : the dependency named here will never exist | |
163 | base=`echo "$f" | sed 's/.*\///'` | |
164 | this_target="lib/auto/$f/$base.$dlext" | |
165 | dynamic_list="$dynamic_list $this_target" | |
166 | ||
167 | : Parallel makes reveal that we have some interdependencies | |
168 | case $f in | |
169 | Math/BigInt/FastCalc) extra_dep="$extra_dep | |
170 | $this_target: lib/auto/List/Util/Util.$dlext" ;; | |
171 | Unicode/Normalize) extra_dep="$extra_dep | |
172 | $this_target: uni.data" ;; | |
173 | esac | |
174 | done | |
175 | ||
176 | static_list=' ' | |
177 | for f in $static_ext; do | |
178 | base=`echo "$f" | sed 's/.*\///'` | |
179 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" | |
180 | done | |
181 | ||
182 | nonxs_list=' ' | |
183 | for f in $nonxs_ext; do | |
184 | base=`echo "$f" | sed 's/.*\///'` | |
185 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" | |
186 | done | |
187 | ||
188 | echo "Extracting $Makefile (with variable substitutions)" | |
189 | $spitshell >$Makefile <<!GROK!THIS! | |
190 | # $Makefile.SH | |
191 | # This file is derived from $Makefile.SH. Any changes made here will | |
192 | # be lost the next time you run Configure. | |
193 | # $Makefile is used to generate $firstmakefile. The only difference | |
194 | # is that $firstmakefile has the dependencies filled in at the end. | |
195 | ||
196 | CC = $cc | |
197 | LD = $ld | |
198 | ||
199 | LDFLAGS = $ldflags | |
200 | CLDFLAGS = $ldflags | |
201 | ||
202 | mallocsrc = $mallocsrc | |
203 | mallocobj = $mallocobj | |
204 | madlysrc = $madlysrc | |
205 | madlyobj = $madlyobj | |
206 | LNS = $lns | |
207 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? | |
208 | CPS = $cp | |
209 | RMS = rm -f | |
210 | ranlib = $ranlib | |
211 | ||
212 | # The following are mentioned only to make metaconfig include the | |
213 | # appropriate questions in Configure. If you want to change these, | |
214 | # edit config.sh instead, or specify --man1dir=/wherever on | |
215 | # installman commandline. | |
216 | bin = $installbin | |
217 | scriptdir = $scriptdir | |
218 | shrpdir = $archlibexp/CORE | |
219 | privlib = $installprivlib | |
220 | man1dir = $man1dir | |
221 | man1ext = $man1ext | |
222 | man3dir = $man3dir | |
223 | man3ext = $man3ext | |
224 | ||
225 | # The following are used to build and install shared libraries for | |
226 | # dynamic loading. | |
227 | LDDLFLAGS = $lddlflags | |
228 | SHRPLDFLAGS = $shrpldflags | |
229 | CCDLFLAGS = $ccdlflags | |
230 | DLSUFFIX = .$dlext | |
231 | PLDLFLAGS = $pldlflags | |
232 | LIBPERL = $libperl | |
233 | LLIBPERL= $linklibperl | |
234 | SHRPENV = $shrpenv | |
235 | ||
236 | # Static targets are ordinarily built without CCCDLFLAGS. However, | |
237 | # if building a shared libperl.so that might later be linked into | |
238 | # another application, then it might be appropriate to also build static | |
239 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC | |
240 | # for GNU cc). This is handled by ext/util/make_ext. | |
241 | STATIC = $static_target | |
242 | ||
243 | # The following is used to include the current directory in | |
244 | # the dynamic loader path you are building a shared libperl. | |
245 | LDLIBPTH = $ldlibpth | |
246 | ||
247 | dynamic_ext = $dynamic_list | |
248 | static_ext = $static_list | |
249 | nonxs_ext = $nonxs_list | |
250 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) | |
251 | DYNALOADER = DynaLoader\$(OBJ_EXT) | |
252 | ||
253 | libs = $perllibs $cryptlib | |
254 | ||
255 | public = perl\$(EXE_EXT) $suidperl utilities translators | |
256 | ||
257 | shellflags = $shellflags | |
258 | ||
259 | # This is set to MAKE=$make if your $make command doesn't | |
260 | # do it for you. | |
261 | $make_set_make | |
262 | ||
263 | # Mention $gmake here so it gets probed for by Configure. | |
264 | ||
265 | # These variables may need to be manually set for non-Unix systems. | |
266 | AR = $full_ar | |
267 | EXE_EXT = $_exe | |
268 | LIB_EXT = $_a | |
269 | OBJ_EXT = $_o | |
270 | PATH_SEP = $p_ | |
271 | ||
272 | # If you're going to use valgrind and it can't be invoked as plain valgrind | |
273 | # then you'll need to change this, or override it on the make command line. | |
274 | VALGRIND=valgrind | |
275 | ||
276 | FIRSTMAKEFILE = $firstmakefile | |
277 | ||
278 | # Any special object files needed by this architecture, e.g. os2/os2.obj | |
279 | ARCHOBJS = $archobjs | |
280 | ||
281 | .SUFFIXES: .c \$(OBJ_EXT) .i .s | |
282 | ||
283 | # grrr | |
284 | SHELL = $sh | |
285 | ||
286 | # how to tr(anslate) newlines | |
287 | TRNL = '$trnl' | |
288 | ||
289 | OPTIMIZE = $optimize | |
290 | ||
291 | EXTRAS = $extras | |
292 | ||
293 | INSTALLPREFIXEXP = $prefix | |
294 | ||
295 | !GROK!THIS! | |
296 | # not used by Makefile but by installperl; | |
297 | # mentioned here so that metaconfig picks these up | |
298 | # $installusrbinperl | |
299 | # $versiononly | |
300 | ||
301 | case "${osname}:${osvers}" in | |
302 | darwin:*) | |
303 | $spitshell >>$Makefile <<EOF | |
304 | ||
305 | # Your locales are broken (osname $osname, osvers $osvers) | |
306 | # and to avoid the numerous | |
307 | # perl: warning: Setting locale failed. | |
308 | # warnings during the build process we reset the locale variables. | |
309 | ||
310 | LC_ALL=C | |
311 | LANG=C | |
312 | LANGUAGE=C | |
313 | EOF | |
314 | ;; | |
315 | esac | |
316 | ||
317 | $spitshell >>$Makefile <<!GROK!THIS! | |
318 | CROSS_NAME = ${CROSS_NAME} | |
319 | CROSS_LIB = xlib/${CROSS_NAME} | |
320 | ||
321 | CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` | |
322 | ||
323 | CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` | |
324 | ||
325 | !GROK!THIS! | |
326 | ||
327 | ## In the following dollars and backticks do not need the extra backslash. | |
328 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
329 | ||
608969de | 330 | CONFIGPM = xlib/$(CROSS_NAME)/Config.pm |
8ed6d636 VK |
331 | |
332 | private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod | |
333 | ||
334 | shextract = Makefile cflags config.h makeaperl makedepend \ | |
335 | makedir myconfig writemain pod/Makefile | |
336 | ||
337 | # Files to be built with variable substitution after miniperl is | |
338 | # available. Dependencies handled manually below (for now). | |
339 | ||
340 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ | |
341 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL | |
342 | ||
343 | # lib/lib.pm is not listed here because it has a rule of its own. | |
344 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ | |
345 | pod/pod2usage pod/podchecker pod/podselect | |
346 | ||
347 | addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct | |
348 | ||
349 | # Unicode data files generated by mktables | |
350 | unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \ | |
351 | lib/unicore/Properties lib/unicore/Decomposition.pl \ | |
352 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl | |
353 | ||
354 | # Directories of Unicode data files generated by mktables | |
355 | unidatadirs = lib/unicore/To lib/unicore/lib | |
356 | ||
357 | h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h | |
358 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h | |
359 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h | |
360 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h | |
361 | h5 = utf8.h warnings.h | |
362 | h = $(h1) $(h2) $(h3) $(h4) $(h5) | |
363 | ||
364 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c | |
365 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c | |
366 | c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c | |
367 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c | |
368 | c5 = $(madlysrc) $(mallocsrc) | |
369 | ||
370 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c | |
371 | ||
372 | obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) | |
373 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) | |
374 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) | |
375 | ||
376 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) | |
377 | ||
378 | lintflags = \ | |
379 | -b \ | |
380 | -n \ | |
381 | -p \ | |
382 | -Ncheck=%all \ | |
383 | -Nlevel=4 \ | |
384 | -errchk=parentheses \ | |
385 | -errhdr=%all \ | |
386 | -errfmt=src \ | |
387 | -errtags \ | |
388 | -erroff=E_ASSIGN_NARROW_CONV \ | |
389 | -erroff=E_BAD_PTR_CAST \ | |
390 | -erroff=E_BAD_PTR_CAST_ALIGN \ | |
391 | -erroff=E_BAD_PTR_INT_COMBINATION \ | |
392 | -erroff=E_BAD_SIGN_EXTEND \ | |
393 | -erroff=E_BLOCK_DECL_UNUSED \ | |
394 | -erroff=E_CASE_FALLTHRU \ | |
395 | -erroff=E_CONST_EXPR \ | |
396 | -erroff=E_CONSTANT_CONDITION \ | |
397 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ | |
398 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ | |
399 | -erroff=E_EXPR_NULL_EFFECT \ | |
400 | -erroff=E_FALSE_LOGICAL_EXPR \ | |
401 | -erroff=E_INCL_NUSD \ | |
402 | -erroff=E_LOOP_EMPTY \ | |
403 | -erroff=E_MAIN_PARAM \ | |
404 | -erroff=E_POINTER_TO_OBJECT \ | |
405 | -erroff=E_PTRDIFF_OVERFLOW \ | |
406 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ | |
407 | -erroff=E_STATIC_UNUSED \ | |
408 | -erroff=E_TRUE_LOGICAL_EXPR | |
409 | ||
410 | splintflags = \ | |
411 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ | |
412 | -D__builtin_va_list=va_list \ | |
413 | -Dsigjmp_buf=jmp_buf \ | |
414 | -warnposix \ | |
415 | \ | |
416 | +boolint \ | |
417 | +charintliteral \ | |
418 | -fixedformalarray \ | |
419 | -mustfreefresh \ | |
420 | -nestedextern \ | |
421 | -predboolint \ | |
422 | -predboolothers \ | |
423 | -preproc \ | |
424 | -boolops \ | |
425 | -shadow \ | |
426 | -nullstate \ | |
427 | +longintegral \ | |
428 | +matchanyintegral \ | |
429 | -type \ | |
430 | \ | |
431 | +line-len 999 \ | |
432 | +weak | |
433 | ||
434 | splintfiles = $(c1) | |
435 | ||
436 | .c$(OBJ_EXT): | |
437 | $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c | |
438 | ||
439 | .c.i: | |
440 | $(CCCMDSRC) -E $*.c > $*.i | |
441 | ||
442 | .c.s: | |
443 | $(CCCMDSRC) -S $*.c | |
444 | ||
445 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make | |
446 | @echo " "; | |
447 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." | |
448 | ||
449 | .PHONY: all | |
450 | ||
451 | ||
452 | # This is now done by installman only if you actually want the man pages. | |
453 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; | |
454 | ||
455 | # Phony target to force checking subdirectories. | |
456 | # Apparently some makes require an action for the FORCE target. | |
457 | .PHONY: FORCE | |
458 | FORCE: | |
459 | @sh -c true | |
460 | !NO!SUBS! | |
461 | $spitshell >>$Makefile <<!GROK!THIS! | |
462 | ||
463 | # We do a copy of the op.c instead of a symlink because gcc gets huffy | |
464 | # if we have a symlink forest to another disk (it complains about too many | |
465 | # levels of symbolic links, even if we have only two) | |
466 | ||
467 | opmini.c: op.c | |
468 | \$(RMS) opmini.c | |
469 | \$(CPS) op.c opmini.c | |
470 | ||
471 | opmini\$(OBJ_EXT): opmini.c | |
472 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c | |
473 | ||
474 | globals\$(OBJ_EXT): | |
475 | ||
476 | !GROK!THIS! | |
477 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
478 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h | |
479 | $(CCCMD) $(PLDLFLAGS) $*.c | |
480 | ||
481 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) | |
482 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c | |
483 | ||
484 | !NO!SUBS! | |
485 | case "$osname" in | |
486 | cygwin) | |
487 | ;; # Let cygwin/Makefile.SHs do its work. | |
488 | *) | |
489 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
490 | perlmain$(OBJ_EXT): perlmain.c | |
491 | $(CCCMD) $(PLDLFLAGS) $*.c | |
492 | ||
493 | !NO!SUBS! | |
494 | ;; | |
495 | esac | |
496 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
497 | # The file ext.libs is a list of libraries that must be linked in | |
498 | # for static extensions, e.g. -lm -lgdbm, etc. The individual | |
499 | # static extension Makefile's add to it. | |
500 | ext.libs: $(static_ext) | |
501 | -@test -f ext.libs || touch ext.libs | |
502 | ||
503 | !NO!SUBS! | |
504 | ||
505 | # How to build libperl. This is still rather convoluted. | |
506 | # Load up custom Makefile.SH fragment for shared loading and executables: | |
507 | case "$osname" in | |
508 | *) | |
509 | Makefile_s="$osname/Makefile.SHs" | |
510 | ;; | |
511 | esac | |
512 | ||
513 | case "$osname" in | |
514 | aix) | |
515 | $spitshell >>$Makefile <<!GROK!THIS! | |
516 | LIBS = $perllibs | |
517 | # In AIX we need to change this for building Perl itself from | |
518 | # its earlier definition (which is for building external | |
519 | # extensions *after* Perl has been built and installed) | |
520 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` | |
521 | ||
522 | !GROK!THIS! | |
523 | case "$useshrplib" in | |
524 | define|true|[yY]*) | |
525 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
526 | ||
527 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) | |
528 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) | |
529 | ||
530 | $(LIBPERL_NONSHR): $(obj) | |
531 | $(RMS) $(LIBPERL_NONSHR) | |
532 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) | |
533 | ||
534 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) | |
535 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ | |
536 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) | |
537 | ||
538 | MINIPERLEXP = $(MINIPERL_NONSHR) | |
539 | ||
540 | LIBPERLEXPORT = perl.exp | |
541 | ||
542 | !NO!SUBS! | |
543 | ||
544 | ;; | |
545 | *) | |
546 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
547 | MINIPERLEXP = miniperl$(EXE_EXT) | |
548 | ||
549 | PERLEXPORT = perl.exp | |
550 | ||
551 | !NO!SUBS! | |
552 | ;; | |
553 | esac | |
554 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
555 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) | |
556 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp | |
557 | ||
558 | !NO!SUBS! | |
559 | ;; | |
560 | os2) | |
561 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
562 | MINIPERLEXP = miniperl | |
563 | ||
564 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map | |
565 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def | |
566 | ||
567 | !NO!SUBS! | |
568 | ;; | |
569 | esac | |
570 | ||
571 | if test -r $Makefile_s ; then | |
572 | . $Makefile_s | |
573 | $spitshell >>$Makefile <<!GROK!THIS! | |
574 | ||
575 | $Makefile: $Makefile_s | |
576 | !GROK!THIS! | |
577 | else | |
578 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
579 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) | |
580 | !NO!SUBS! | |
581 | case "$useshrplib" in | |
582 | true) | |
583 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
584 | rm -f $@ | |
585 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) | |
586 | !NO!SUBS! | |
587 | case "$osname" in | |
588 | aix) | |
589 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
590 | rm -f libperl$(OBJ_EXT) | |
591 | mv $@ libperl$(OBJ_EXT) | |
592 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) | |
593 | !NO!SUBS! | |
594 | ;; | |
595 | esac | |
596 | ;; | |
597 | *) | |
598 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
599 | rm -f $(LIBPERL) | |
600 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) | |
601 | @$(ranlib) $(LIBPERL) | |
602 | !NO!SUBS! | |
603 | ;; | |
604 | esac | |
605 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
606 | ||
607 | # How to build executables. | |
608 | ||
609 | # The $& notation tells Sequent machines that it can do a parallel make, | |
610 | # and is harmless otherwise. | |
611 | # The miniperl -w -MExporter line is a basic cheap test to catch errors | |
612 | # before make goes on to run preplibrary and then MakeMaker on extensions. | |
613 | # This is very handy because later errors are often caused by miniperl | |
614 | # build problems but that's not obvious to the novice. | |
615 | # The Module used here must not depend on Config or any extensions. | |
616 | ||
617 | !NO!SUBS! | |
618 | ||
619 | ||
620 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
621 | ||
622 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
623 | -@rm -f miniperl.xok | |
624 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
625 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
626 | ||
627 | # Purify/Quantify Perls. | |
628 | ||
629 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
630 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
631 | ||
632 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
633 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
634 | ||
635 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
636 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
637 | ||
638 | # Valgrind perl (currently Linux only) | |
639 | ||
640 | perl.valgrind.config: config.sh | |
641 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
642 | @$(MAKE) perl.config.dashg | |
643 | @echo "Checking usemymalloc='n' in config.sh..." | |
644 | @grep "^usemymalloc=" config.sh | |
645 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
646 | @echo "And of course you have to have valgrind..." | |
647 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 | |
648 | ||
649 | # Third Degree Perl (Tru64 only) | |
650 | ||
651 | perl.config.dashg: | |
652 | @echo "Checking optimize='-g' in config.sh..." | |
653 | @grep "^optimize=" config.sh | |
654 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 | |
655 | ||
656 | perl.third.config: config.sh | |
657 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
658 | @$(MAKE) perl.config.dashg | |
659 | @echo "Checking usemymalloc='n' in config.sh..." | |
660 | @grep "^usemymalloc=" config.sh | |
661 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
662 | ||
663 | perl.third: /usr/bin/atom perl.third.config perl | |
664 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl | |
665 | @echo "Now you may run perl.third and then study perl.3log." | |
666 | ||
667 | # Pixie Perls (Tru64 and IRIX only) | |
668 | ||
669 | perl.pixie.config: config.sh | |
670 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." | |
671 | @$(MAKE) perl.config.dashg | |
672 | ||
673 | perl.pixie.atom: /usr/bin/atom perl | |
674 | atom -tool pixie -L. -all -toolargs="-quiet" perl | |
675 | ||
676 | perl.pixie.irix: perl | |
677 | pixie perl | |
678 | ||
679 | perl.pixie: /usr/bin/pixie perl.pixie.config perl | |
680 | if test -x /usr/bin/atom; then \ | |
681 | $(MAKE) perl.pixie.atom; \ | |
682 | else \ | |
683 | $(MAKE) perl.pixie.irix; \ | |
684 | fi | |
685 | @echo "Now you may run perl.pixie and then run pixie." | |
686 | ||
687 | # Gprof Perl | |
688 | ||
689 | perl.config.dashpg: | |
690 | @echo "Checking optimize='-pg' in config.sh..." | |
691 | @grep "^optimize=" config.sh | |
692 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 | |
693 | ||
694 | perl.gprof.config: config.sh | |
695 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." | |
696 | @$(MAKE) perl.config.dashpg | |
697 | ||
698 | perl.gprof: /usr/bin/gprof perl.gprof.config | |
699 | @-rm -f perl | |
700 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl | |
701 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." | |
702 | ||
703 | # Gcov Perl | |
704 | ||
705 | perl.config.gcov: | |
706 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." | |
707 | @echo "Checking gccversion in config.sh..." | |
708 | @grep "^gccversion=" config.sh | |
709 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 | |
710 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." | |
711 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." | |
712 | @grep "^ccflags=" config.sh | |
713 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 | |
714 | ||
715 | perl.gcov: perl.config.gcov | |
716 | @-rm -f perl | |
717 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl | |
718 | @echo "Now you may run perl.gcov and then run gcov some.c." | |
719 | ||
720 | # Microperl. This is just a convenience thing if one happens to | |
721 | # build also the full Perl and therefore the real big Makefile: | |
722 | # usually one should manually explicitly issue the below command. | |
723 | ||
724 | .PHONY: microperl | |
725 | microperl: | |
726 | $(MAKE) -f Makefile.micro | |
727 | ||
728 | # This version, if specified in Configure, does ONLY those scripts which need | |
729 | # set-id emulation. Suidperl must be setuid root. It contains the "taint" | |
730 | # checks as well as the special code to validate that the script in question | |
731 | # has been invoked correctly. | |
732 | ||
733 | suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
734 | $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
735 | ||
736 | !NO!SUBS! | |
737 | ||
738 | fi | |
739 | ||
740 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
741 | ||
742 | sperl$(OBJ_EXT): perl.c $(h) | |
743 | $(RMS) sperl.c | |
744 | $(LNS) perl.c sperl.c | |
745 | $(CCCMD) -DIAMSUID sperl.c | |
746 | $(RMS) sperl.c | |
747 | ||
748 | # We have to call our ./makedir because Ultrix 4.3 make can't handle the line | |
749 | # test -d lib/auto || mkdir lib/auto | |
750 | # We need to autosplit in two steps because VOS can't handle so many args | |
751 | # | |
752 | .PHONY: preplibrary | |
753 | preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) | |
754 | @sh ./makedir lib/auto | |
755 | @echo " AutoSplitting perl library" | |
756 | $(LDLIBPTH) ./miniperl -Ilib -MCross -e 'use AutoSplit; \ | |
757 | autosplit_lib_modules(@ARGV)' lib/*.pm | |
758 | $(LDLIBPTH) ./miniperl -Ilib -MCross -e 'use AutoSplit; \ | |
759 | autosplit_lib_modules(@ARGV)' lib/*/*.pm | |
760 | $(MAKE) lib/re.pm | |
761 | ||
762 | .PHONY: makeppport | |
763 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) | |
764 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport | |
765 | ||
766 | $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary | |
608969de VK |
767 | $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) |
768 | cp *.h $(CROSS_LIB)/ | |
769 | cp ext/re/re.pm $(LIBDIR)/ | |
770 | ||
771 | $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h | |
8ed6d636 VK |
772 | |
773 | lib/re.pm: ext/re/re.pm | |
774 | @-rm -f $@ | |
775 | cp ext/re/re.pm lib/re.pm | |
776 | ||
777 | $(plextract): miniperl $(CONFIGPM) x2p/s2p | |
778 | @-rm -f $@ | |
779 | $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL | |
780 | ||
781 | lib/lib.pm: miniperl $(CONFIGPM) | |
782 | @-rm -f $@ | |
783 | $(LDLIBPTH) ./miniperl -Ilib -MCross lib/lib_pm.PL | |
784 | ||
785 | unidatafiles $(unidatafiles): uni.data | |
786 | ||
787 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables | |
788 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w | |
789 | touch uni.data | |
790 | ||
791 | extra.pods: miniperl | |
792 | -@test ! -f extra.pods || rm -f `cat extra.pods` | |
793 | -@rm -f extra.pods | |
794 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ | |
795 | nx=`echo $$x | sed -e "s/README\.//"`; \ | |
796 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ | |
797 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ | |
798 | done | |
799 | -@rm -f pod/perlvms.pod | |
800 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods | |
801 | -@rm -f pod/perldelta.pod | |
802 | -@test -f pod/perl595delta.pod && cd pod && $(LNS) perl595delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc | |
803 | ||
804 | extras.make: perl$(EXE_EXT) | |
805 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` | |
806 | ||
807 | extras.test: perl$(EXE_EXT) | |
808 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` | |
809 | ||
810 | extras.install: perl$(EXE_EXT) | |
811 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` | |
812 | ||
813 | .PHONY: install install-strip install-all install-verbose install-silent \ | |
814 | no-install install.perl install.man install.html | |
815 | ||
816 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm | |
817 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta | |
818 | ||
819 | install-strip: | |
820 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" | |
821 | ||
822 | install install-all: | |
823 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" | |
824 | ||
825 | install-verbose: | |
826 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" | |
827 | ||
828 | install-silent: | |
829 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" | |
830 | ||
831 | no-install: | |
832 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" | |
833 | ||
834 | # Set this to an empty string to avoid an attempt of rebuild before install | |
835 | INSTALL_DEPENDENCE = all | |
836 | ||
837 | install.perl: $(INSTALL_DEPENDENCE) installperl | |
838 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) | |
839 | -@test ! -s extras.lst || $(MAKE) extras.install | |
840 | ||
841 | install.man: all installman | |
842 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) | |
843 | ||
844 | # XXX Experimental. Hardwired values, but useful for testing. | |
845 | # Eventually Configure could ask for some of these values. | |
846 | install.html: all installhtml | |
847 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. | |
848 | $(LDLIBPTH) ./perl installhtml \ | |
849 | --podroot=. --podpath=. --recurse \ | |
850 | --htmldir=$(privlib)/html \ | |
851 | --htmlroot=$(privlib)/html \ | |
852 | --splithead=pod/perlipc \ | |
853 | --splititem=pod/perlfunc \ | |
854 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ | |
855 | --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \ | |
856 | --verbose | |
857 | ||
858 | ||
859 | # I now supply perly.c with the kits, so the following section is | |
860 | # used only if you force bison to run by saying | |
861 | # make regen_perly | |
862 | # You normally shouldn't remake perly.[ch]. | |
863 | ||
864 | .PHONY: regen_perly | |
865 | ||
866 | run_byacc: | |
867 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" | |
868 | ||
869 | # this outputs perly.h, perly.act and perly.tab | |
870 | regen_perly: | |
871 | perl regen_perly.pl | |
872 | ||
873 | # We don't want to regenerate perly.c and perly.h, but they might | |
874 | # appear out-of-date after a patch is applied or a new distribution is | |
875 | # made. | |
876 | perly.c: perly.y | |
877 | -@sh -c true | |
878 | ||
879 | perly.h: perly.y | |
880 | -@sh -c true | |
881 | ||
882 | # No compat3.sym here since and including the 5.004_50. | |
883 | # No interp.sym since 5.005_03. | |
884 | SYM = global.sym globvar.sym perlio.sym pp.sym | |
885 | ||
886 | SYMH = perlvars.h intrpvar.h | |
887 | ||
888 | CHMOD_W = chmod +w | |
889 | ||
890 | # The following files are generated automatically | |
891 | # autodoc.pl: pod/perlapi.pod pod/perlintern.pod | |
892 | # embed.pl: proto.h embed.h embedvar.h global.sym | |
893 | # perlapi.h perlapi.c | |
894 | # [* embed.pl needs pp.sym generated by opcode.pl! *] | |
895 | # keywords.pl: keywords.h | |
896 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym | |
897 | # regcomp.pl: regnodes.h | |
898 | # warnings.pl: warnings.h lib/warnings.pm | |
899 | # The correct versions should be already supplied with the perl kit, | |
900 | # in case you don't have perl available. | |
901 | # To force them to be regenerated, run | |
902 | # perl regen.pl | |
903 | # with your existing copy of perl | |
904 | # (make regen_headers is kept for backwards compatibility) | |
905 | ||
906 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ | |
907 | embed.h embedvar.h global.sym \ | |
908 | pod/perlintern.pod pod/perlapi.pod \ | |
909 | perlapi.h perlapi.c regnodes.h \ | |
910 | warnings.h lib/warnings.pm | |
911 | ||
912 | .PHONY: regen_headers regen_pods regen_all | |
913 | ||
914 | regen regen_headers: FORCE | |
915 | -perl regen.pl | |
916 | ||
917 | regen_pods: FORCE | |
918 | -cd pod; $(LDLIBPTH) $(MAKE) regen_pods | |
919 | ||
920 | regen_all: regen regen_pods | |
921 | ||
922 | .PHONY: manisort manicheck | |
923 | ||
924 | manisort: FORCE | |
925 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ | |
926 | LC_ALL=C sort -fdo MANIFEST MANIFEST) | |
927 | ||
928 | manicheck: FORCE | |
929 | perl Porting/manicheck | |
930 | ||
931 | # Extensions: | |
932 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will | |
933 | # automatically get built. There should ordinarily be no need to change | |
934 | # any of this part of makefile. | |
935 | # | |
936 | # The dummy dependency is a place holder in case $(dynamic_ext) or | |
937 | # $(static_ext) is empty. | |
938 | # | |
939 | # DynaLoader may be needed for extensions that use Makefile.PL. | |
940 | ||
941 | ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) | |
942 | ### if not exist $(AUTODIR) mkdir $(AUTODIR) | |
943 | ### cd $(EXTDIR)\$(*B) | |
944 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL | |
945 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL | |
946 | ### cd ..\..\win32 | |
947 | ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) | |
948 | ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) | |
949 | ### cd $(EXTDIR)\$(*B) | |
950 | ### $(XSUBPP) dl_win32.xs > $(*B).c | |
951 | ### cd ..\..\win32 | |
952 | ### | |
953 | ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs | |
954 | ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs | |
955 | ||
956 | ||
957 | ||
958 | $(DYNALOADER): preplibrary FORCE | |
959 | @$(LDLIBPTH) sh ext/util/make_ext_cross $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) | |
960 | ||
961 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
962 | @$(LDLIBPTH) sh ext/util/make_ext_cross dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) | |
963 | ||
964 | s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE | |
965 | @$(LDLIBPTH) sh ext/util/make_ext_cross $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) | |
966 | ||
967 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE | |
968 | @$(LDLIBPTH) sh ext/util/make_ext_cross nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) | |
969 | !NO!SUBS! | |
970 | ||
971 | $spitshell >>$Makefile <<EOF | |
972 | $extra_dep | |
973 | EOF | |
974 | ||
975 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
976 | ||
977 | .PHONY: printconfig | |
978 | printconfig: | |
979 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) | |
980 | ||
981 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ | |
982 | realclean _realcleaner clobber _clobber \ | |
983 | distclean veryclean _verycleaner \ | |
984 | cleanup_unpacked_files unpack_files | |
985 | ||
986 | clean: cleanup_unpacked_files _tidy _mopup | |
987 | ||
988 | realclean: cleanup_unpacked_files _realcleaner _mopup | |
989 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" | |
990 | ||
991 | _clobber: | |
992 | -@rm -f Cross/run-* Cross/to-* Cross/from-* | |
993 | rm -f config.sh cppstdin Policy.sh extras.lst | |
994 | ||
995 | clobber: cleanup_unpacked_files _realcleaner _mopup _clobber | |
996 | ||
997 | distclean: clobber | |
998 | ||
999 | # Like distclean but also removes emacs backups and *.orig. | |
1000 | veryclean: _verycleaner _mopup _clobber | |
1001 | -@rm -f Obsolete Wanted | |
1002 | ||
1003 | # Do not 'make _mopup' directly. | |
1004 | _mopup: | |
1005 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) | |
1006 | -rmdir .depending | |
1007 | -@test -f extra.pods && rm -f `cat extra.pods` | |
1008 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod | |
1009 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o | |
1010 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def | |
1011 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap | |
1012 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log | |
1013 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs | |
1014 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok | |
1015 | -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump | |
1016 | -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl | |
1017 | -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old | |
1018 | -rm -f config.over | |
1019 | ||
1020 | # Do not 'make _tidy' directly. | |
1021 | _tidy: | |
1022 | -cd pod; $(LDLIBPTH) $(MAKE) clean | |
1023 | -cd utils; $(LDLIBPTH) $(MAKE) clean | |
1024 | -cd x2p; $(LDLIBPTH) $(MAKE) clean | |
1025 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
1026 | $(LDLIBPTH) sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \ | |
1027 | done | |
1028 | ||
1029 | _cleaner1: | |
1030 | -cd os2; rm -f Makefile | |
1031 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
1032 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
1033 | -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
1034 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
1035 | $(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \ | |
1036 | done | |
1037 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean | |
1038 | ||
1039 | # Some systems do not support "?", so keep these files separate. | |
1040 | _cleaner2: | |
1041 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c | |
1042 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* | |
1043 | rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests | |
1044 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) | |
1045 | rm -rf $(addedbyconf) | |
1046 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old | |
1047 | rm -f $(private) | |
1048 | rm -rf $(unidatafiles) $(unidatadirs) | |
1049 | rm -rf lib/auto | |
1050 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists | |
1051 | rm -f h2ph.man pstruct | |
1052 | rm -rf .config | |
1053 | rm -f preload | |
1054 | rm -rf lib/Encode lib/Compress lib/Hash lib/re | |
1055 | rm -rf lib/IO/Compress lib/IO/Uncompress | |
1056 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c | |
1057 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) | |
1058 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) | |
1059 | -rmdir lib/B lib/Data | |
1060 | -rmdir lib/Filter/Util lib/IO/Socket | |
1061 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys | |
1062 | -rmdir lib/threads lib/XS | |
1063 | ||
1064 | _realcleaner: | |
1065 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean | |
1066 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1067 | ||
1068 | _verycleaner: | |
1069 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean | |
1070 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1071 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig | |
1072 | ||
1073 | .PHONY: lint | |
1074 | lint: $(c) | |
1075 | rm -f *.ln | |
1076 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) | |
1077 | ||
1078 | .PHONY: splint | |
1079 | splint: $(c) | |
1080 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) | |
1081 | ||
1082 | # Need to unset during recursion to go out of loop. | |
1083 | # The README below ensures that the dependency list is never empty and | |
1084 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. | |
1085 | ||
1086 | MAKEDEPEND = Makefile makedepend | |
1087 | ||
1088 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) | |
1089 | $(MAKE) depend MAKEDEPEND= | |
1090 | ||
1091 | config.h: config_h.SH config.sh | |
1092 | $(SHELL) config_h.SH | |
1093 | # TODO - improve following line | |
1094 | cp config.h $(CROSS_LIB)/ | |
1095 | ||
1096 | xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh | |
1097 | CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH | |
608969de | 1098 | #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
8ed6d636 | 1099 | cp xconfig.h $(CROSS_LIB)/ |
608969de | 1100 | cp xconfig.h $(CROSS_LIB)/config.h |
8ed6d636 VK |
1101 | |
1102 | # When done, touch perlmain.c so that it doesn't get remade each time. | |
1103 | .PHONY: depend | |
1104 | depend: makedepend | |
1105 | sh ./makedepend MAKE=$(MAKE) | |
1106 | - test -s perlmain.c && touch perlmain.c | |
1107 | cd x2p; $(MAKE) depend | |
1108 | ||
1109 | # Cannot postpone this until $firstmakefile is ready ;-) | |
1110 | makedepend: makedepend.SH config.sh | |
1111 | sh ./makedepend.SH | |
1112 | ||
1113 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ | |
1114 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ | |
1115 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ | |
1116 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ | |
1117 | test.third check.third utest.third ucheck.third test_notty.third \ | |
1118 | test.deparse test_notty.deparse test_harness test_harness_notty \ | |
1119 | minitest coretest test.taintwarn | |
1120 | ||
1121 | # Cannot delegate rebuilding of t/perl to make | |
1122 | # to allow interlaced test and minitest | |
1123 | ||
1124 | TESTFILE=TEST | |
1125 | ||
1126 | _test_prep: unpack_files | |
1127 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) | |
1128 | ||
1129 | # Architecture-neutral stuff: | |
1130 | ||
1131 | test_prep_pre: preplibrary utilities $(nonxs_ext) | |
1132 | ||
1133 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) | |
1134 | PERL=./perl $(MAKE) _test_prep | |
1135 | ||
1136 | _test_tty: | |
1137 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty | |
1138 | ||
1139 | _test_notty: | |
1140 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) | |
1141 | ||
1142 | unpack_files: | |
1143 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m | |
1144 | ||
1145 | cleanup_unpacked_files: | |
1146 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c | |
1147 | ||
1148 | # The second branch is for testing without a tty or controlling terminal, | |
1149 | # see t/op/stat.t | |
1150 | _test: | |
1151 | if (true </dev/tty) >/dev/null 2>&1; then \ | |
1152 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ | |
1153 | else \ | |
1154 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ | |
1155 | fi | |
1156 | @echo "Ran tests" > t/rantests | |
1157 | ||
1158 | test check: test_prep | |
1159 | PERL=./perl $(MAKE) _test | |
1160 | ||
1161 | test_tty: test_prep | |
1162 | PERL=./perl $(MAKE) _test_tty | |
1163 | ||
1164 | test_notty: test_prep | |
1165 | PERL=./perl $(MAKE) _test_notty | |
1166 | ||
1167 | utest ucheck test.utf8 check.utf8: test_prep | |
1168 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test | |
1169 | ||
1170 | coretest: test_prep | |
1171 | PERL=./perl TEST_ARGS=-core $(MAKE) _test | |
1172 | ||
1173 | test-prep: test_prep | |
1174 | ||
1175 | test-tty: test_tty | |
1176 | ||
1177 | test-notty: test_notty | |
1178 | ||
1179 | # Torture testing | |
1180 | ||
1181 | test.torture torturetest: test_prep | |
1182 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test | |
1183 | ||
1184 | # Targets for UTF16 testing: | |
1185 | ||
1186 | minitest.utf16: minitest.prep | |
1187 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
1188 | && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
1189 | ||
1190 | test.utf16 check.utf16: test_prep | |
1191 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test | |
1192 | ||
1193 | utest.utf16 ucheck.utf16: test_prep | |
1194 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test | |
1195 | ||
1196 | # Targets for valgrind testing: | |
1197 | ||
1198 | test_prep.valgrind: test_prep perl.valgrind | |
1199 | PERL=./perl $(MAKE) _test_prep | |
1200 | ||
1201 | test.valgrind check.valgrind: test_prep perl.valgrind.config | |
1202 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test | |
1203 | ||
1204 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config | |
1205 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1206 | ||
1207 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config | |
1208 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty | |
1209 | ||
1210 | # Targets for Third Degree testing. | |
1211 | ||
1212 | test_prep.third: test_prep perl.third | |
1213 | PERL=./perl.third $(MAKE) _test_prep | |
1214 | ||
1215 | test.third check.third: test_prep.third perl.third | |
1216 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test | |
1217 | ||
1218 | utest.third ucheck.third: test_prep.third perl.third | |
1219 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1220 | ||
1221 | test_notty.third: test_prep.third perl.third | |
1222 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty | |
1223 | ||
1224 | # Targets for Deparse testing. | |
1225 | ||
1226 | test.deparse: test_prep | |
1227 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test | |
1228 | ||
1229 | test_notty.deparse: test_prep | |
1230 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty | |
1231 | ||
1232 | # Targets to run the test suite with -t | |
1233 | ||
1234 | test.taintwarn: test_prep | |
1235 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test | |
1236 | ||
1237 | minitest.prep: | |
1238 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ | |
1239 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) | |
1240 | @echo " " | |
1241 | @echo "You may see some irrelevant test failures if you have been unable" | |
1242 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." | |
1243 | @echo " " | |
1244 | ||
1245 | # Can't depend on lib/Config.pm because that might be where miniperl | |
1246 | # is crashing. | |
1247 | minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep | |
1248 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
1249 | && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty | |
1250 | ||
1251 | # Test via harness | |
1252 | ||
1253 | test_harness: test_prep | |
1254 | PERL=./perl $(MAKE) TESTFILE=harness _test | |
1255 | ||
1256 | test_harness_notty: test_prep | |
1257 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test | |
1258 | ||
1259 | # Handy way to run perlbug -ok without having to install and run the | |
1260 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
1261 | # Please *don't* use this unless all tests pass. | |
1262 | # If you want to report test failures, use "make nok" instead. | |
1263 | ||
1264 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack | |
1265 | ||
1266 | ok: utilities | |
1267 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' | |
1268 | ||
1269 | okfile: utilities | |
1270 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok | |
1271 | ||
1272 | oknack: utilities | |
1273 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A | |
1274 | ||
1275 | okfilenack: utilities | |
1276 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A | |
1277 | ||
1278 | nok: utilities | |
1279 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' | |
1280 | ||
1281 | nokfile: utilities | |
1282 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok | |
1283 | ||
1284 | noknack: utilities | |
1285 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A | |
1286 | ||
1287 | nokfilenack: utilities | |
1288 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A | |
1289 | ||
1290 | .PHONY: clist hlist shlist pllist | |
1291 | ||
1292 | clist: $(c) | |
1293 | echo $(c) | tr ' ' $(TRNL) >.clist | |
1294 | ||
1295 | hlist: $(h) | |
1296 | echo $(h) | tr ' ' $(TRNL) >.hlist | |
1297 | ||
1298 | shlist: $(sh) | |
1299 | echo $(sh) | tr ' ' $(TRNL) >.shlist | |
1300 | ||
1301 | pllist: $(pl) | |
1302 | echo $(pl) | tr ' ' $(TRNL) >.pllist | |
1303 | ||
1304 | Makefile: Makefile.SH ./config.sh | |
1305 | $(SHELL) Makefile.SH | |
1306 | ||
1307 | .PHONY: distcheck | |
1308 | distcheck: FORCE | |
1309 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' | |
1310 | ||
1311 | .PHONY: elc | |
1312 | elc: emacs/cperl-mode.elc | |
1313 | ||
1314 | emacs/cperl-mode.elc: emacs/cperl-mode.el | |
1315 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el | |
1316 | ||
1317 | .PHONY: etags ctags tags | |
1318 | ||
1319 | etags: TAGS | |
1320 | ||
1321 | TAGS: emacs/cperl-mode.elc | |
1322 | sh emacs/ptags | |
1323 | ||
1324 | # Let's hope make will not go into an infinite loop on case-unsensitive systems | |
1325 | # This may also fail if . is in the head of the path, since perl will | |
1326 | # require -Ilib | |
1327 | tags: TAGS | |
1328 | perl emacs/e2ctags.pl TAGS > tags | |
1329 | ||
1330 | ctags: | |
1331 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h | |
1332 | ||
1333 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE | |
1334 | # If this runs make out of memory, delete /usr/include lines. | |
1335 | !NO!SUBS! | |
1336 | ||
1337 | $eunicefix $Makefile | |
1338 | case `pwd` in | |
1339 | *SH) | |
1340 | $rm -f ../$Makefile | |
1341 | $ln $Makefile ../$Makefile | |
1342 | ;; | |
1343 | esac | |
1344 | $rm -f $firstmakefile | |
1345 | ||
1346 | # Now do any special processing required before building. | |
1347 | ||
1348 | case "$ebcdic" in | |
1349 | define) | |
1350 | xxx='' | |
1351 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 | |
1352 | case "$osname" in | |
1353 | os390|posix-bc) | |
1354 | if cd x2p | |
1355 | then | |
1356 | rm -f y.tab.c y.tab.h | |
1357 | case "$osname" in | |
1358 | posix-bc) | |
1359 | # we are using two different yaccs in BS2000 Posix! | |
1360 | byacc a2p.y >/dev/null 2>&1 | |
1361 | ;; | |
1362 | *) # e.g. os390 | |
1363 | yacc a2p.y >/dev/null 2>&1 | |
1364 | ;; | |
1365 | esac | |
1366 | if cmp -s y.tab.c a2p.c | |
1367 | then | |
1368 | rm -f y.tab.c | |
1369 | else | |
1370 | echo "a2p.y -> a2p.c" >&2 | |
1371 | mv -f y.tab.c a2p.c | |
1372 | chmod u+w a2p.c | |
1373 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ | |
1374 | -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ | |
1375 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c | |
1376 | xxx="$xxx a2p.c" | |
1377 | fi | |
1378 | # In case somebody yacc -d:ed the a2p.y. | |
1379 | if test -f y.tab.h | |
1380 | then | |
1381 | if cmp -s y.tab.h a2p.h | |
1382 | then | |
1383 | rm -f y.tab.h | |
1384 | else | |
1385 | echo "a2p.h -> a2p.h" >&2 | |
1386 | mv -f y.tab.h a2p.h | |
1387 | xxx="$xxx a2p.h" | |
1388 | fi | |
1389 | fi | |
1390 | cd .. | |
1391 | fi | |
1392 | ;; | |
1393 | vmesa) | |
1394 | # Do nothing in VM/ESA. | |
1395 | ;; | |
1396 | *) | |
1397 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 | |
1398 | ;; | |
1399 | esac | |
1400 | case "$xxx" in | |
1401 | '') echo "No parser files were regenerated. That's okay." >&2 ;; | |
1402 | esac | |
1403 | ;; | |
1404 | esac | |
1405 | ||
1406 | # ex: set ts=8 sts=4 sw=4 noet: |