-Jarrko's How to build Configure tweaked by Nick.
+ Jarkko's How to build Configure tweaked by Nick and Merijn, and now
+ maintained by perl5-metaconfig
+
+The Configure script and config_h.SH file in the Perl distribution are
+generated by a program called metaconfig. Metaconfig was originally
+written by Larry Wall, and was subsequently enhanced and maintained
+by Raphael Manfredi. The binary that invokes the generation of the
+Configure file is called mconfig.
+
+As sort order and filenaming are vital in this process, make sure you
+are working on a case-sensitive file system! (Case preserving is not
+sufficient).
You have presumably obtained the metaconfig from the repository e.g.
-p4 sync //depot/metaconfig/...
-or some other way to obtain this file.
-Normally this directory and perl directory are next to each other
-so ../perl will get you to perl and ../perl/../metaconfig will get you
-back here.
+ $ git clone git@github.com:Perl/metaconfig metaconfig
+
+When working with metaconfig you will generally have two git checkouts
+next to each other: (1) this metaconfig checkout; and (2) a checkout of
+the Perl source code in which you will generate a new Configure script. In this
+README, we will refer to these directories as the 'metaconfig' directory and
+the 'perl' directory.
+
+Since these two directories are normally next to each other, so ../perl
+will get you to perl and ../perl/../metaconfig will get you back here.
+You should establish a symbolic link to the checkout in which Configure
+is generated such as this:
+
+ $ cd metaconfig
+ $ ln -s ../perl perl
+
+We will do the reverse symlinks later.
+
+Contents of this directory:
+
+ README: This file.
+ U: Metaconfig units used for building Perl's Configure
+ dist-git:
+ a git clone of "dist". Optionally present. See (a) below.
+ This is where dist/meta resides as of 2016-04-01
+ dist:
+ The folder where the original units from dist are in.
+ These may differ from dist-git, as upstream also moves
+ on and develops.
+
+Development workflow:
+
+(a) In order to assemble Configure from its units, you need mlint/metalint and
+ mconfig/metaconfig from the "dist" package installed and available in your
+ $PATH. You can either use the version that comes with your OS (Debian ships
+ it) or the versions that are included in this checkout: just add the full
+ name of this folder/bin to your $PATH. If you are not planning to analyse
+ differences of the current state with upstream dist, you can skip the rest
+ of step (a) now.
+
+ If you also want to play with or compare to the original meta/dist, you
+ can checkout that too.
+
+ The dist version used for perl is dist-3.5-20 in this directory, which is
+ a slightly modified version of the original, which you can get at GITHUB
+ repository https://github.com/rmanfredi/dist.git. If you'd like to keep
+ up to date with changes in dist, you can use git to create your own clone.
+ For git, that would be something like:
+
+ $ git clone https://github.com/rmanfredi/dist.git dist-git
-(a) You need to have dist installed so that you have metalint and metaconfig
- in your $PATH.
- The dist version used for perl is dist-3.0at70b in this directory.
Unsurprisingly 'dist' uses (its) Configure to generate itself:
- cd dist-3.0at70b
- chmod +w -R . # We have derived files in perforce :-(
- ./Configure
- make
- make install
+ $ cd dist-3.5-20 # or dist-git
+ $ chmod -R +w . # We have derived files in git :-(
+ $ ./Configure
+ $ make
+ $ make install
+
+ After make install, remove lib/U/d_debugging.U in your target lib, as perl
+ uses its own way to set/define debugging (see INSTALL)
- dist's 'Configure' is similar to perl's but perhaps not
- quite as polished.
+ dist's 'Configure' is similar to perl's but perhaps not quite as polished.
There are some perl specific "dist units" in the 'U' directory.
- The U directory also contains some patches to 'dist' which
- have already been applied to dist-3.0at70b directory.
- We have not yet arranged for metaconfig to use perl's versions
- of the 'units' by default so you need some housekeeping
- in the perl directory...
-
-(b) You need to be in a/the Perl directory, i.e. either
- something from //depot/perl/... or one of its branches
- (e.g. Nick I-S is usually in //depot/perlio/...)
- and you need:
- 1) have a symlink to ../metaconfig/U called U
- 2) have a symlink to ../metaconfig/.package called .package
- 3) have a symlink to MANIFEST called MANIFEST.new
-
-(c) Write the new unit as U/foo/bar.U (usually 'foo' is just 'perl',
- but sometimes there's some more appropriate subdir of U)
-
-(d) metalint to see nits: as opposed to lint, the gripings of
- metalint are usually serious :-) and need fixing
-
- Exceptions are lots of
- Your private U/modified/voidflags.U overrides the public one.
+ The U directory also contains some patches to 'dist' which have already
+ been applied to dist-3.5-20 directory.
+
+(aa) We have not yet arranged for metaconfig to use perl's versions of the
+ 'units' by default so you need some housekeeping in the perl directory...
+
+ Add metaconfig/bin to your $PATH or create aliases like
+
+ $ export MC5=/your/path/to/metaconfig
+ $ alias ml="perl $MC5/bin/mlint -O"
+ $ alias mc="perl $MC5/bin/mconfig -m -O"
+
+ examples in the rest of this README will just refer to mlint and mconfig
+ as if they appear in your $PATH
+
+(aaa)
+
+ If you plan to make changes to mconfig or mlint locally (and you might
+ want to, as both are written for perl4), consider installing mconfig and
+ mlint from the cmon subdirectory into your $PATH too. These are the
+ non-autoloading versions and can easily be changed. As these are used by
+ all team members, please communicate changes on github first.
+
+(b) You need to be in the 'perl' checkout directory, which you created the
+ symbolic link to, in preparation. In this working directory, you need
+ symbolic links too, which are already known to perl itself to ignore.
+ Assuming you have metaconfig and perl side by side on the same level:
+ ln -s ../metaconfig/U U
+ ln -s ../metaconfig/.package .package
+ ln -s MANIFEST MANIFEST.new
+ chmod +w Configure config_h.SH Porting/Glossary Porting/config*
+
+(c) Create a new file for the unit as U/foo/d_bar.U
+ ('foo' is one of the existing folders in U except for 'all'. If you are
+ modifying a unit already in dist, simply copy the dist version to
+ 'modified' as a starting point. Otherwise, create a new file in one of the
+ other directories. It most likely will be 'perl', but it could also be
+ 'compline' or any other existing folder). Choose the best appropriate
+ subdir of U. See U/README for a description of the various subdirectories.
+ You should choose the closest existing unit file as a starting point, and
+ first copy it to the new file. For example, the unit for seeing if
+ strtold_l() exists was created as U/threads/d_strtold_l.U, copied from
+ perl/d_strtold.U, then adjusted. It goes under 'threads' because it is
+ used only on threaded perls.
+
+(d) Run "mlint -O" to see nits: as opposed to lint, the gripings of mlint
+ are usually serious and need fixing
+
+ Without -O, exceptions are lots of
+ Your private U/modified/issymlink.U overrides the public one.
due to the perl special units
and
which is apparently normal ...
-(e) p4 edit Configure config_h.SH
+-- the next steps are in the perl folder, though the instructions below include
+ a 'cd perl' at each step, as a reminder. If you already are in 'perl',
+ disregard the reminders.
+
+(e) There is a chicken and egg problem for newly created units. To get around
+ this, for such a unit, edit the file metaconfig.h and add to the comment
+ the appropropriate name. To continue the example above, we would add the
+ string HAS_STRTOLD_L at the end of the comment. This can be removed once
+ the code base has actual uses of the unit.
+
+(f) "mconfig -m -O" to regenerate Configure and config_h.SH
+
+ Make *sure* your mconfig is the correct one in your $PATH, as the mono-web
+ package will install /usr/bin/mconfig which will do something completely
+ different.
+
+(g) metaconfig does not deal with depends in config_h.SH, so some
+ reorganization is needed.
-(f) metaconfig -m to regenerate Configure
+ $ cd perl
+ $ perl Porting/config_h.pl
-(g) The messy not-yet-automated part is that the knowledge of the new symbol
- needs to be propagated to non-Configure lands like Win32, Netware,
+ will fix the ordering
+
+(h) The messy semi-automated part is that the knowledge of the new symbol
+ needs to be propagated to non-Configure lands like Win32, WinCE, Netware,
VMS, VOS, ... see previous Configure changes to see which are these
- heathen lands
+ heathen lands. Files to take care of are
+ {win32,wince,NetWare}/config_[hH]*, (Win32, WinCE, NetWare),
+ configure.com (VMS). Depending on the kind of patch djgpp/config* might
+ also need adjusting (for example when adding/changing the list of
+ extensions)
+
+ Most can be checked and updated by a tool Nicholas provided:
+
+ $ cd perl
+ $ perl Porting/checkcfgvar.pl
+
+ and if it shows differences, use one of:
+
+ $ perl Porting/checkcfgvar.pl --regen --default=undef
+ $ perl Porting/checkcfgvar.pl --regen --default=define
+
+ based on the changes you made. For safety, probes should probably be
+ 'undef', whereas some other things unconditionally should default to
+ 'define'. For example, 'default_inc_excludes_dot' should be 'define'
+ except in very limited circumstances, because it closes a security hole.
+
+ For Win32 the process is semi-automated. You have to have a Win32
+ machine to run dmake on to complete the process, but that can be done
+ later by someone with such access.
+
+ For VMS, ('configure.com'), it may be best to add the units as 'undef' and
+ let the VMS experts deal with them later. However, you can set them to
+ 'define' if they are non-tricky (such as being basic functions having
+ standard signatures across architectures), and are in the oldest release of
+ VMS that perl can be compiled on, which is 7.3-2. Appendix A of "HP C
+ Run-Time Library Reference Manual for OpenVMS Systems" gives you that
+ information. As of October 2017, the latest version online is available
+ at: http://h41379.www4.hpe.com/doc/84final/5763/5763profile.html
+
+ In configure.com, if there is an existing probe that is essentially the
+ same (except for the names) as the one you're adding, you can copy, paste,
+ and adjust to create a new one, but note that it's easy to run afoul of the
+ quoting rules in configure.com. New probed-for units likely will require
+ at least 2 groups of changes.
+
+ Rerun checkcfgvar.pl until you've fixed everything it finds.
+
+(i) Check if U/mkglossary (right near the top) points to where you keep
+ dist's standard metaconfig units as well as your perl-specific ones.
+
+(j) Run the perl build chain
+
+ $ cd perl
+ $ make veryclean # Only if Configure already has been run
+ $ ./Configure -Duse64bitall -Dusethreads -Dusedevel -des
+ $ perl regen/uconfig_h.pl
+
+ Then make and make test or make test_harness
+
+ $ make -j12
+ $ env TEST_JOBS=13 make test_harness
+
+ Before you start committing, make sure that
+
+ $ make test_porting
+
+ still passes
+
+(k) Optionally, run Porting/mksample to freshen the Porting/config*.
+ Adjust the various compile-time options (e.g. 64bit, threads) as
+ you see fit.
+ You can skip this step, it's not essential, just good housekeeping.
+
+ Most of this only works if you have run the core-tests with the new
+ generated files
+
+(kk) Run U/mkgloss.pl to freshen Porting/Glossary
+
+ You should at least check
+
+ $ perl U/mkgloss.pl | diff Porting/Glossary -
+
+ This will show two warnings that you can ignore:
+
+ U/mkglossary: couldn't find libdb_needs_pthread
+ U/mkglossary: couldn't find libdirs
+
+ all other things need a review
+
+-- the next steps are in the metaconfig folder again
- For Win32 the process is semi-automated - if you have a Win32
- machine to run dmake on ...
+(l) git add U/foo/bar.U when you are ready ...
-(h) then there's the running of mksample to freshen the Porting/config*
- and Porting/Glossary, but I can't remember where the 'mksample' came
- from, could be part of 'dist'. You can skip this phase,
- it's not essential, just good housekeeping.
+(m) git commit -m "Your commit description"
-(i) make veryclean;sh Configure -des -Dusedevel;make all test
+(n) When all patches are applied, tested and committed, and you are happy,
+ git push
-(j) p4 add ../metaconfig/foo/bar.U when you are ready ...
+References:
-(k) p4 submit
+Documentation on 'dist' may be found at these locations:
+https://github.com/rmanfredi/dist/blob/master/mcon/man/mconfig.SH
+https://manpages.debian.org/stretch/dist/metaconfig.1.en.html
+Git tags:
+Tags are maintained in this git repository mapping the version of the
+units that were used for the Configure in a given release of perl,
+named simply after the version of perl in question (for example, at
+the time of writing the current stable release is 5.26.1). This provides
+a stable reference for downstreams wishing to import the metaconfig units
+into their own packaging. Therefore, at minimum tags for each stable
+release should be made (adding tags for development releases being an
+optional extra).