This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
perl5.git
7 years agowrite_buildcustomize.pl: Setup $^O to be the target os when building Core.
Jess Robinson [Sat, 29 Dec 2012 21:32:30 +0000 (21:32 +0000)]
write_buildcustomize.pl: Setup $^O to be the target os when building Core.

This allows the correct hints files to be loaded when building modules
We do this by giving write_buildcustomize.pl a 'osname' parameter.

This means that write_buildcustomize.pl no longer depends on
Config to get osname, which eliminates a circular dependency
in the Makefiles.

7 years agoconfigpm should use "osname" from config.sh, instead of miniperl's $^O.
Jess Robinson [Tue, 15 Jan 2013 10:40:08 +0000 (10:40 +0000)]
configpm should use "osname" from config.sh, instead of miniperl's $^O.

This is necessary when cross-compiliing, as we use a host (mini)perl to
run configpm for the target arch; so for example, miniperl's $^O
might be 'linux', but config.sh's osname can be 'qnx'.

7 years agoRun all the miniperl calls locally, not via RUN
Jess Robinson [Wed, 9 Jan 2013 10:43:42 +0000 (10:43 +0000)]
Run all the miniperl calls locally, not via RUN

7 years agoBuild host miniperl and generate_uudmap binaries when cross compiling, for local use
Jess Robinson [Fri, 4 Jan 2013 10:47:48 +0000 (10:47 +0000)]
Build host miniperl and generate_uudmap binaries when cross compiling, for local use

7 years agoStop using Config{run} to check the version of (mini)perl we are running
Jess Robinson [Wed, 2 Jan 2013 14:55:59 +0000 (14:55 +0000)]
Stop using Config{run} to check the version of (mini)perl we are running

7 years agoStop using $run for anything other than testing compiled tests in Configure.
Jess Robinson [Sat, 29 Dec 2012 21:29:50 +0000 (21:29 +0000)]
Stop using $run for anything other than testing compiled tests in Configure.

When cross-compiling we want to run miniperl etc on the compile host, not the test target

7 years agoUpdate AUTHORS and MANIFEST to appease test_porting
Jess Robinson [Thu, 17 Jan 2013 11:45:13 +0000 (11:45 +0000)]
Update AUTHORS and MANIFEST to appease test_porting

7 years agofix the ability to use targethost when defined.
Neil Williams [Sat, 12 Jan 2013 13:23:00 +0000 (13:23 +0000)]
fix the ability to use targethost when defined.

7 years agoadd an escape for when targethost is not defined but usecrosscompile is.
Neil Williams [Fri, 11 Jan 2013 17:01:22 +0000 (17:01 +0000)]
add an escape for when targethost is not defined but usecrosscompile is.

See http://www.nntp.perl.org/group/perl.perl5.porters/2012/12/msg196443.html
"Cross-building and Makefile.SH", which explains the reasoning for this.

7 years agoConfigure: Set to/from/run scripts if targethost is passed
Jess Robinson [Sat, 29 Dec 2012 21:23:01 +0000 (21:23 +0000)]
Configure: Set to/from/run scripts if targethost is passed

Do this regardless of whether we are cross compiling

7 years agoConfigure: Split the usecrosscompile section from the to/from/run section
Jess Robinson [Sat, 29 Dec 2012 21:23:01 +0000 (21:23 +0000)]
Configure: Split the usecrosscompile section from the to/from/run section

Beyond organization, this also makes sure that usecrosscompile is
always set to undef if we're not cross-compiling, which enables
code to realibly use $Config{usecrosscompile} to check for a
cross-compiling perl.

7 years agorestore missed commit in regeneration (spotted by hugmeir)
H.Merijn Brand [Wed, 22 Jan 2014 13:29:06 +0000 (14:29 +0100)]
restore missed commit in regeneration (spotted by hugmeir)

7 years agoRegenerate from meta after backporting crosscompile changes
H.Merijn Brand [Wed, 22 Jan 2014 11:28:57 +0000 (12:28 +0100)]
Regenerate from meta after backporting crosscompile changes

I am sure there are items that could have been processed even cleaner,
but with the current state, the content is functional equal.

7 years agoperldelta for c91312d5e, none needed for e214621be
Tony Cook [Wed, 22 Jan 2014 05:41:22 +0000 (16:41 +1100)]
perldelta for c91312d5e, none needed for e214621be

7 years ago[perl #120977] use warnings "FATAL" implies "all"
Tony Cook [Wed, 22 Jan 2014 05:33:17 +0000 (16:33 +1100)]
[perl #120977] use warnings "FATAL" implies "all"

7 years ago[perl #120977] bump $warnings::VERSION
Tony Cook [Wed, 22 Jan 2014 05:31:49 +0000 (16:31 +1100)]
[perl #120977] bump $warnings::VERSION

7 years agoassume "all" in "use warnings 'FATAL';" and related
Hauke D [Sun, 12 Jan 2014 23:50:51 +0000 (00:50 +0100)]
assume "all" in "use warnings 'FATAL';" and related

Until now, the behavior of the statements

 use warnings "FATAL";
 use warnings "NONFATAL";
 no warnings "FATAL";

was unspecified and inconsistent. This change causes them to be handled
with an implied "all" at the end of the import list.

Tony Cook: fix AUTHORS formatting

7 years agoadd a missing word in perllexwarn
Hauke D [Sun, 12 Jan 2014 23:46:03 +0000 (00:46 +0100)]
add a missing word in perllexwarn

7 years agoPerlIO_tmpfile: Don't leak an SV
Brian Fraser [Wed, 22 Jan 2014 01:46:10 +0000 (22:46 -0300)]
PerlIO_tmpfile: Don't leak an SV

This was spotted by Daniel Dragan on the thread for #120591

7 years agoperlio.c, PerlIO_tmpfile: Fall back to cwd if we have no /tmp or $TMPDIR
Brian Fraser [Wed, 22 Jan 2014 01:45:17 +0000 (22:45 -0300)]
perlio.c, PerlIO_tmpfile: Fall back to cwd if we have no /tmp or $TMPDIR

With this, open($fh, undef) will now work on systems without
a /tmp (or equivalent) where TMPDIR is not set.

7 years agosv.c, Perl_dirp_dup: Skip the fchdir sections if telldir and seekdir are not defined
Brian Fraser [Sat, 18 May 2013 02:13:55 +0000 (23:13 -0300)]
sv.c, Perl_dirp_dup: Skip the fchdir sections if telldir and seekdir are not defined

7 years agoUpdate Scalar-List-Utils to CPAN version 1.37
Chris 'BinGOs' Williams [Tue, 21 Jan 2014 14:57:36 +0000 (14:57 +0000)]
Update Scalar-List-Utils to CPAN version 1.37

  [DELTA]

1.37 -- 2014/01/21 14:44:34
   [BUGFIXES]
   * Fix unweaken() for perls < 5.14; need to use sv_setsv() to undef
     rather than sv_clear() (RT92226)

7 years agoversion and Module-CoreList are up to date with CPAN
Chris 'BinGOs' Williams [Tue, 21 Jan 2014 14:56:42 +0000 (14:56 +0000)]
version and Module-CoreList are up to date with CPAN

7 years agodocument $^P's 0x800 and 0x1000
Ricardo Signes [Mon, 20 Jan 2014 23:40:16 +0000 (18:40 -0500)]
document $^P's 0x800 and 0x1000

these were introduced in c30d8139e

7 years agocreate new perldelta for 5.19.9
Ricardo Signes [Mon, 20 Jan 2014 22:36:17 +0000 (17:36 -0500)]
create new perldelta for 5.19.9

7 years agoadd the 5.19.8 epigraph
Ricardo Signes [Mon, 20 Jan 2014 22:31:27 +0000 (17:31 -0500)]
add the 5.19.8 epigraph

7 years agofix an epigraph typo
Ricardo Signes [Mon, 20 Jan 2014 22:16:35 +0000 (17:16 -0500)]
fix an epigraph typo

His name is Milo Minderbinder.

He is twenty-seven years old.

7 years agobump version to 5.19.9!
Ricardo Signes [Mon, 20 Jan 2014 22:02:44 +0000 (17:02 -0500)]
bump version to 5.19.9!

7 years agoMerge tag 'v5.19.8' into blead
Ricardo Signes [Mon, 20 Jan 2014 22:01:18 +0000 (17:01 -0500)]
Merge tag 'v5.19.8' into blead

Ninth release of the v5.19 series!

7 years agoperldelta: add the 5.19.8 acknowledgements v5.19.8
Ricardo Signes [Mon, 20 Jan 2014 20:54:04 +0000 (15:54 -0500)]
perldelta: add the 5.19.8 acknowledgements

7 years agorename sTHX to PERL_MEMORY_DEBUG_HEADER_SIZE
David Mitchell [Mon, 20 Jan 2014 14:24:02 +0000 (14:24 +0000)]
rename sTHX to PERL_MEMORY_DEBUG_HEADER_SIZE

Originally this macro evaluated to the size of the THX pointer;
this was used with the memory pool facility to store the context of the
caller of the malloc() for debugging. Later, the header of the malloc()
stored more than just the context, so sTHX became a mismoner.

Rename it to something less misleading.

7 years agoPrevent V-magic from being stripped by locale fix
John Peacock [Fri, 17 Jan 2014 19:43:34 +0000 (14:43 -0500)]
Prevent V-magic from being stripped by locale fix

version/t/00impl-pp.t was failing with locales

See thread beginning
    <20140113132518.GA11721@iabyn.com>

7 years agoperlhist: note that 5.19.8 should be released today
Ricardo Signes [Mon, 20 Jan 2014 12:52:37 +0000 (07:52 -0500)]
perlhist: note that 5.19.8 should be released today

7 years agothrreads::shared: LEAVE in BOOT had wrong context
David Mitchell [Mon, 20 Jan 2014 12:03:15 +0000 (12:03 +0000)]
thrreads::shared: LEAVE in BOOT had wrong context

In Perl_sharedsv_init() - which is called from the threads::shared BOOT
code - it creates a new shared interpreter, then tries to undo the ENTER
done as the last step of the perl_construct(PL_sharedsv_space) step, with
a LEAVE. But the LEAVE was being done in the context of the caller
interpreter rather than the shared one.

See the thread beginning <52D528FE.20701@havurah-software.org>

7 years ago[perl #121031] fix all of the other incorrect calls to fresh_perl_is()
Tony Cook [Mon, 20 Jan 2014 01:06:47 +0000 (12:06 +1100)]
[perl #121031] fix all of the other incorrect calls to fresh_perl_is()

The third argument to fresh_perl_is()/fresh_perl_like() is treated as
a hashref, passing a string is kind of strange.

7 years ago[perl #121031] pass a valid value for $runperl_args to fresh_perl_is()
Tony Cook [Mon, 20 Jan 2014 00:46:47 +0000 (11:46 +1100)]
[perl #121031] pass a valid value for $runperl_args to fresh_perl_is()

Alternative patch for the problems noticed by Tobias Leich

7 years agofix splice+isa test that got mangled when making splice.t use test.pl
Tobias Leich [Sat, 18 Jan 2014 19:53:45 +0000 (20:53 +0100)]
fix splice+isa test that got mangled when making splice.t use test.pl

See ce6d40e02d52b9152b44a5fc2180efda15a7d069

7 years agopod/perllexwarn.pod: clarify note about the "deprecated" category
Ævar Arnfjörð Bjarmason [Sun, 19 Jan 2014 16:45:13 +0000 (16:45 +0000)]
pod/perllexwarn.pod: clarify note about the "deprecated" category

Saying that something used to behave a certain way "In Perl 5.6.1" can
be understood as it changing in 5.6.2, but in fact this change to the
"deprecated" category in perl-5.6.0-8156-g12bcd1a was never released in
any 5.6.* release, it was first released in 5.8.0.

So note that explicitly instead, it's less ambiguous to just say "Before
Perl 5.8.0".

7 years agoperldelta: update module changes
Ricardo Signes [Sun, 19 Jan 2014 15:34:50 +0000 (10:34 -0500)]
perldelta: update module changes

used Porting/corelist-perldelta.pl!  thanks Abir Viqar and
Steve Hay!

7 years agoupdate Module::CoreList
Ricardo Signes [Sun, 19 Jan 2014 15:28:54 +0000 (10:28 -0500)]
update Module::CoreList

7 years agoupdate latest copyright year to 2014
Ricardo Signes [Sun, 19 Jan 2014 15:13:50 +0000 (10:13 -0500)]
update latest copyright year to 2014

7 years agoperldelta: prune unused sections and markers
Ricardo Signes [Sun, 19 Jan 2014 15:11:50 +0000 (10:11 -0500)]
perldelta: prune unused sections and markers

7 years agoperldelta for 1850f57f
Ricardo Signes [Sun, 19 Jan 2014 15:07:01 +0000 (10:07 -0500)]
perldelta for 1850f57f

7 years agoperldelta for addition of IO-Socket-IP
Ricardo Signes [Sun, 19 Jan 2014 14:38:54 +0000 (09:38 -0500)]
perldelta for addition of IO-Socket-IP

7 years agotentatively import IO-Socket-IP for consideration
Ricardo Signes [Sun, 19 Jan 2014 14:33:13 +0000 (09:33 -0500)]
tentatively import IO-Socket-IP for consideration

7 years agofix broken perl5197delta
Ricardo Signes [Sun, 19 Jan 2014 13:24:20 +0000 (08:24 -0500)]
fix broken perl5197delta

7 years agoperldelta for bfa371b621
Father Chrysostomos [Sun, 19 Jan 2014 05:50:13 +0000 (21:50 -0800)]
perldelta for bfa371b621

7 years agoperldelta for f60e676307
Father Chrysostomos [Sun, 19 Jan 2014 05:49:06 +0000 (21:49 -0800)]
perldelta for f60e676307

7 years ago[perl #119949] Stop undef *_, goto &sub from crashing
Father Chrysostomos [Sun, 19 Jan 2014 03:16:55 +0000 (19:16 -0800)]
[perl #119949] Stop undef *_, goto &sub from crashing

Commit 049bd5ffd62b fixed problems with the wrong @_ being visible
after *_ modification followed by goto.  In so doing, it made it
possible for a null to be placed at the start of the target sub’s
pad, because it was not checking that the array it got from PL_defgv
was actually non-null.  Simply adding the check makes everything work.

7 years ago[perl #119973] Treat initial { in format args as block
Father Chrysostomos [Sun, 19 Jan 2014 01:58:52 +0000 (17:58 -0800)]
[perl #119973] Treat initial { in format args as block

Commit 705fe0e5f8a inadvertently caused the hash-vs-block disambigua-
tion to apply at the beginning of a format argument line.  This commit
restores the implicit ‘do’, but only when the opening brace is the
first token on that line, not embedded within an expression.

In other words, this now has a block as before:

format =
{ foo => "bar" }
.

but this still produces a hash (in 5.16 it was a block):

format =
+{ foo => "bar }
.

7 years agoUse ASSUME in op.c:newBINOP
Father Chrysostomos [Sun, 19 Jan 2014 01:07:33 +0000 (17:07 -0800)]
Use ASSUME in op.c:newBINOP

This causes op.o to drop by 56 bytes for me under clang.

7 years agodiag.t: More exceptions
Father Chrysostomos [Sun, 19 Jan 2014 01:35:40 +0000 (17:35 -0800)]
diag.t: More exceptions

7 years agoregen customized.dat
Father Chrysostomos [Sun, 19 Jan 2014 01:32:29 +0000 (17:32 -0800)]
regen customized.dat

7 years agoMaintainers.pl: vutil.c is not customized any moer
Father Chrysostomos [Sun, 19 Jan 2014 01:31:50 +0000 (17:31 -0800)]
Maintainers.pl: vutil.c is not customized any moer

7 years agoExplicit ENTER/LEAVE block for upg_version
John Peacock [Sun, 19 Jan 2014 00:25:52 +0000 (19:25 -0500)]
Explicit ENTER/LEAVE block for upg_version

7 years agoLots of C optimizations for both speed/correctness
John Peacock [Sun, 12 Jan 2014 16:19:53 +0000 (11:19 -0500)]
Lots of C optimizations for both speed/correctness

Clean up a lot of the less efficient uses of various Perl
macros and functions, mostly from bulk88@hotmail.com.  Also
deal with the fact that older Perl's were not handling locale
setting in a consistent manner.  This means going back to the
less efficient but always correct method of ALWAYS copying the
old locale and switch to C and then restoring, for all Perl
releases prior to 5.19.0.  Discontinue support for Perl's prior
to v5.6.2.

7 years agoMake runperl normalize newlines with multiple output lines.
Craig A. Berry [Sat, 18 Jan 2014 19:27:57 +0000 (13:27 -0600)]
Make runperl normalize newlines with multiple output lines.

On VMS only, because rarely but occasionally (such as with
perl5db.t) runperl produces multiple lines of output and they
all need the same treatment.

7 years agoFix perl5db.t test 41 on VMS.
Craig A. Berry [Sat, 18 Jan 2014 19:22:25 +0000 (13:22 -0600)]
Fix perl5db.t test 41 on VMS.

We're getting newlines in between items, and the easiest way to
deal with it is make them explicit so we expect what we're getting
and it's done the same everywhere.

7 years agoext/POSIX/t/time.t: Conditionalize the use of setlocale/LC_TIME
Brian Fraser [Fri, 26 Apr 2013 07:10:16 +0000 (04:10 -0300)]
ext/POSIX/t/time.t: Conditionalize the use of setlocale/LC_TIME

On Android, all locales are simply disabled, which broke the assumption
that LC_TIME is always available.

7 years agot/op/threads-dirh.t: Only test telldir and seekdir if they are available
Brian Fraser [Sat, 18 May 2013 00:56:00 +0000 (21:56 -0300)]
t/op/threads-dirh.t: Only test telldir and seekdir if they are available

7 years agot/op/getpid.t: Silence undef warnings if getconf doesn't exist.
Brian Fraser [Thu, 16 May 2013 09:34:17 +0000 (06:34 -0300)]
t/op/getpid.t: Silence undef warnings if getconf doesn't exist.

If a platform has getppid() but not getconf and we're building a
threaded perl, this file would've shown undef warnings, although
no tests were affected.

7 years agot/op/magic.t: Comment for an unlink test
Jess Robinson [Fri, 19 Apr 2013 11:08:34 +0000 (12:08 +0100)]
t/op/magic.t: Comment for an unlink test

7 years agot/run/switches.t: Skip setlocale tests if !d_setlocale
Jess Robinson [Fri, 19 Apr 2013 11:08:34 +0000 (12:08 +0100)]
t/run/switches.t: Skip setlocale tests if !d_setlocale

7 years agot/op/taint.t: Skip crypt tests if !d_crypt
Jess Robinson [Fri, 19 Apr 2013 11:08:34 +0000 (12:08 +0100)]
t/op/taint.t: Skip crypt tests if !d_crypt

7 years agot/lib/warnings/9uninit: Skip crypt tests if !d_crypt
Jess Robinson [Fri, 19 Apr 2013 11:08:34 +0000 (12:08 +0100)]
t/lib/warnings/9uninit: Skip crypt tests if !d_crypt

7 years agoDynaLoader: Pure-perl mod2fname shouldn't use %Config at runtime
Brian Fraser [Sat, 18 Jan 2014 13:03:00 +0000 (10:03 -0300)]
DynaLoader: Pure-perl mod2fname shouldn't use %Config at runtime

This is somewhat obscure.  Previously, mod2fname would've tried
accessing $Config{dlext} each time it was called.  The reason this
can be problematic is that mod2fname can be called during global destruction,
after %Config is freed but before its magic is.  This was causing
Devel::GlobalDestruction's tests to fail on builds with -Dd_libname_unique.

This commit grabs the data we need when DynaLoader.pm is being built in
DynaLoader_pm.PL, so it no longer need to depend on %Config.

7 years agoIncrease $Hash::Util::FieldHash::VERSION to 1.14
Father Chrysostomos [Sat, 18 Jan 2014 13:52:08 +0000 (05:52 -0800)]
Increase $Hash::Util::FieldHash::VERSION to 1.14

7 years agoHash::Util::FieldHash: fix broken pod link
Father Chrysostomos [Sat, 18 Jan 2014 13:47:22 +0000 (05:47 -0800)]
Hash::Util::FieldHash: fix broken pod link

7 years agoIncrease $threads::shared::VERSION to 1.46
Father Chrysostomos [Sat, 18 Jan 2014 13:44:17 +0000 (05:44 -0800)]
Increase $threads::shared::VERSION to 1.46

7 years agoperldelta typo
Father Chrysostomos [Sat, 18 Jan 2014 13:42:03 +0000 (05:42 -0800)]
perldelta typo

7 years agothreads::shared: Don’t link to moving targets
Father Chrysostomos [Sat, 18 Jan 2014 13:36:52 +0000 (05:36 -0800)]
threads::shared: Don’t link to moving targets

The Scalar::Util documentation has changed, so the links are broken.
But we cannot just update the link targets, as threads::shared is
living a double life and may be installed along with an older
Scalar::Util.

7 years agoperldiag: Rewrap autoderef entries
Father Chrysostomos [Sat, 18 Jan 2014 01:39:38 +0000 (17:39 -0800)]
perldiag: Rewrap autoderef entries

for better splain output

7 years agoperldelta for 88c342510b9
Father Chrysostomos [Sat, 18 Jan 2014 01:32:17 +0000 (17:32 -0800)]
perldelta for 88c342510b9

7 years agoperldelta for 6567ce2473
Father Chrysostomos [Sat, 18 Jan 2014 01:28:56 +0000 (17:28 -0800)]
perldelta for 6567ce2473

7 years agoMention perlbug -p in perlhack.
Craig A. Berry [Sat, 18 Jan 2014 03:46:08 +0000 (21:46 -0600)]
Mention perlbug -p in perlhack.

Using git's --attach with perlbug -f actually mangled the patches,
making them harder to apply, but now we have a better way to do it.

7 years agoperldelta for perlbug changes.
Craig A. Berry [Sat, 18 Jan 2014 00:04:58 +0000 (18:04 -0600)]
perldelta for perlbug changes.

7 years agoMake perlbug Unicode-aware.
Craig A. Berry [Wed, 1 Jan 2014 18:31:02 +0000 (12:31 -0600)]
Make perlbug Unicode-aware.

Try to do input in whatever the locale wants and output raw in
hopes that will best survive mail transport.

Except when reading in a patch file, we'll also use raw for input
because there may be multiple encodings in the patch, and we'll
also use raw for input when reading in the report file that we've
written out raw.

We attempt to detect the locale encoding using the private and
undocumented _get_locale_encoding() function of the deprecated
encoding pragma module.  But it's what the open pragma does and
we protect ourselves by checking that it's available and falling
back to an empty layer specification ("<:") if we can't load that
function.  That should also give us something workable when there
is no dynamic loading, such as under miniperl.

7 years agoSwitch perlbug mail sender on VMS.
Craig A. Berry [Sat, 16 Nov 2013 02:55:58 +0000 (20:55 -0600)]
Switch perlbug mail sender on VMS.

The VMS mail utility can't do attachments because it always adds
a blank line in front of any headers you add.  So use the Send
From File utility, which has been documented and supported for
any release in the last decade and was latently present before
that.

It takes the whole message verbatim just like sendmail, but also
needs the envelope prepended.

7 years agoAdd perlbug -p option for attaching patches.
Craig A. Berry [Sun, 10 Nov 2013 00:42:57 +0000 (18:42 -0600)]
Add perlbug -p option for attaching patches.

Log files and other text attachments should also be fine as long
as they aren't big enough to be rejected by RT.

Only text attachments are supported, as other kinds would involve
wrestling with myriad MIME types and possibly content transfer
encodings.  This should be fine for binary patches, though, as
git format-patch encodes those in Base85, so the patch file itself
is still text.

7 years agoperldelta for 901ee108fe
Father Chrysostomos [Fri, 17 Jan 2014 15:51:23 +0000 (07:51 -0800)]
perldelta for 901ee108fe

7 years agoperldelta for ceaf124e0
Father Chrysostomos [Fri, 17 Jan 2014 15:43:08 +0000 (07:43 -0800)]
perldelta for ceaf124e0

7 years agoAdded config.arch to .gitignore
Brian Fraser [Fri, 17 Jan 2014 16:16:06 +0000 (13:16 -0300)]
Added config.arch to .gitignore

7 years agoconfig.h: Remove the exceptions for cross-compilation builds
Brian Fraser [Wed, 15 Jan 2014 09:42:35 +0000 (06:42 -0300)]
config.h: Remove the exceptions for cross-compilation builds

This makes it so that the values for MEM_ALIGNBYTES and BYTEORDER
are taken from config.sh, instead of always getting a default.

7 years agoINSTALL: Document -Dsysroot
Brian Fraser [Thu, 16 Jan 2014 11:15:10 +0000 (08:15 -0300)]
INSTALL: Document -Dsysroot

7 years agoAdd missing $run prefix to some Configure tests
Jess Robinson [Sat, 29 Dec 2012 21:27:13 +0000 (21:27 +0000)]
Add missing $run prefix to some Configure tests

7 years agoIntroduce $targetport to allow running on a non-standard ssh port
Jess Robinson [Tue, 15 Jan 2013 10:26:22 +0000 (10:26 +0000)]
Introduce $targetport to allow running on a non-standard ssh port

Such as when using user networking on qemu and redirecting a local port
to the emulator ssh

7 years agoStore the targetdir, targethost from Configure in config.sh for later.
Jess Robinson [Thu, 31 Jan 2013 14:12:31 +0000 (14:12 +0000)]
Store the targetdir, targethost from Configure in config.sh for later.

7 years agoConfigure: Remove "was file copied" check using run-ssh
Jess Robinson [Tue, 15 Jan 2013 10:26:22 +0000 (10:26 +0000)]
Configure: Remove "was file copied" check using run-ssh

This doesn't seem to be of much use.

7 years agoConfigure: If using targetarch, the computed binaries should stick
Brian Fraser [Tue, 19 Nov 2013 12:16:11 +0000 (09:16 -0300)]
Configure: If using targetarch, the computed binaries should stick

7 years agoConfigure: Don't skip the alignbytes test when crosscompiling
Brian Fraser [Mon, 13 Jan 2014 07:22:02 +0000 (04:22 -0300)]
Configure: Don't skip the alignbytes test when crosscompiling

7 years agoConfigure: Add $run to two tests
Brian Fraser [Mon, 13 Jan 2014 05:03:16 +0000 (02:03 -0300)]
Configure: Add $run to two tests

7 years agoConfigure: use $sysroot, if available, in checkccflags
Brian Fraser [Mon, 13 Jan 2014 05:00:43 +0000 (02:00 -0300)]
Configure: use $sysroot, if available, in checkccflags

If the user specified -Dsysroot but we don't use it, then the results can
be entirely off.

This also introduces an internal variable for Configure, _sysroot,
which is just "--sysroot=$sysroot", for use in places like checkccflags that
need --sysroot but don't need the other flags.

7 years agoConfigure: No need to skip the byteorder test when cross-compiling.
Brian Fraser [Sat, 11 Jan 2014 05:54:03 +0000 (02:54 -0300)]
Configure: No need to skip the byteorder test when cross-compiling.

This skip was added in 2001, but under the current model there's no
real reason to skip it.

7 years agoFix two Configure tests when targethost is set
Jess Robinson [Sat, 29 Dec 2012 21:23:01 +0000 (21:23 +0000)]
Fix two Configure tests when targethost is set

7 years agoConfigure: When cross-compiling, look for *-gcc* instead of *-*-gcc
Brian Fraser [Fri, 11 Oct 2013 19:52:48 +0000 (16:52 -0300)]
Configure: When cross-compiling, look for *-gcc* instead of *-*-gcc

Ditto with g++. This allows us to use, for example, ntox86-gcc or
x86_64-w64-mingw32-g++.exe to cross-compile, and have Configure detect
most things automatically.

7 years agoSet appropriate flags for linux or linux-like systems.
Jess Robinson [Sat, 29 Dec 2012 21:26:27 +0000 (21:26 +0000)]
Set appropriate flags for linux or linux-like systems.

This means that osnames that look like *linux*, like linux-androideabi
or linux-gnueabihf are treated like linux systems.

7 years agosv_buf_to_rw can be static
Father Chrysostomos [Fri, 17 Jan 2014 14:30:57 +0000 (06:30 -0800)]
sv_buf_to_rw can be static

sv_buf_to_ro needs to be non-static because op.c uses it, but
sv_buf_to_rw is only called from sv.c.

7 years agoAlways define sTHX as 0 when not using mem debug header
Father Chrysostomos [Fri, 17 Jan 2014 14:11:02 +0000 (06:11 -0800)]
Always define sTHX as 0 when not using mem debug header

I broke the threaded build in b001a0d149 by assuming that sTHX was
always set to 0 when memory debug headers were not in use.  That is
an easy assumption to make, so this commit makes that assumption true.
(And there is no reason it cannot be made true.  There is no need for
sTHX to be set under PERL_IMPLICIT_CONTEXT but not PERL_TRACK_MEMPOOL,
where sTHX was not even used before b001a0d149.)

7 years ago[Merge] Cow Tools
Father Chrysostomos [Fri, 17 Jan 2014 02:03:35 +0000 (18:03 -0800)]
[Merge] Cow Tools

This branch provides a PERL_DEBUG_READONLY_COW mode that turns COW
violations into crashes.  It also add documentation to perlguts
explaining how to handle COW strings in XS code.

There are two ‘known’ failures in IO::Compress’ tests.  A patch has
been sent upstream.

(Apologies to Gary Larson.)

7 years agoutil.c: A couple of defines to simplify #ifdef maze
Father Chrysostomos [Sun, 12 Jan 2014 00:45:18 +0000 (16:45 -0800)]
util.c: A couple of defines to simplify #ifdef maze

No real simplification in terms of the number of #ifdefs, but more
readability (hopefully).