This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
perl5.git
10 years agoadd a missing apostrophe
Ricardo Signes [Wed, 4 Jan 2012 01:28:55 +0000 (20:28 -0500)]
add a missing apostrophe

thanks, Jim Keenan

10 years agoUpdate Module-Pluggable to CPAN version 4.0
Chris 'BinGOs' Williams [Tue, 3 Jan 2012 21:01:46 +0000 (21:01 +0000)]
Update Module-Pluggable to CPAN version 4.0

  [DELTA]

  No change log found for 4.0 release

10 years agoSync Maintainers.pl with CPAN for ExtUtils-ParseXS
Chris 'BinGOs' Williams [Tue, 3 Jan 2012 20:46:22 +0000 (20:46 +0000)]
Sync Maintainers.pl with CPAN for ExtUtils-ParseXS

10 years agoop.c Remove redundant continue
Father Chrysostomos [Tue, 3 Jan 2012 07:25:27 +0000 (23:25 -0800)]
op.c Remove redundant continue

10 years agoPacklist.t: add bug number
Father Chrysostomos [Tue, 3 Jan 2012 07:06:14 +0000 (23:06 -0800)]
Packlist.t: add bug number

10 years agoChange wording of \E warning
Father Chrysostomos [Tue, 3 Jan 2012 06:34:51 +0000 (22:34 -0800)]
Change wording of \E warning

following Karl Williamson’s suggestion.

10 years agotoke.c: Unpaired '\E's in double-quotish contexts should warn.
Brian Fraser [Fri, 30 Dec 2011 04:01:21 +0000 (01:01 -0300)]
toke.c: Unpaired '\E's in double-quotish contexts should warn.

Until now, an unpaired \E (that is, one lacking a \U, \L or \Q)
would just pass through unnoticed. This commit changes that
behavior to issue a warning instead.

10 years agoExtUtils::Packlist: Restore 5.005 compatibility
Father Chrysostomos [Tue, 3 Jan 2012 05:28:32 +0000 (21:28 -0800)]
ExtUtils::Packlist: Restore 5.005 compatibility

I think.  I haven’t actually tested it.

10 years ago[perl #107410] Tests for used-once warnings from ExtUtils::Packlist
Father Chrysostomos [Tue, 3 Jan 2012 05:26:52 +0000 (21:26 -0800)]
[perl #107410] Tests for used-once warnings from ExtUtils::Packlist

10 years agoAdd Joel Berger to AUTHORS
Father Chrysostomos [Tue, 3 Jan 2012 05:26:49 +0000 (21:26 -0800)]
Add Joel Berger to AUTHORS

10 years agoRemoved 'once' warnings in ExtUtils::Packlist::mkfh.
Joel Berger [Mon, 2 Jan 2012 18:55:52 +0000 (12:55 -0600)]
Removed 'once' warnings in ExtUtils::Packlist::mkfh.

Fixes cpan bug #50315.

10 years agoIncrease $ExtUtils::Packlist::VERSION to 1.46
Father Chrysostomos [Tue, 3 Jan 2012 04:33:30 +0000 (20:33 -0800)]
Increase $ExtUtils::Packlist::VERSION to 1.46

10 years agoCorrect test count in regen.t
Father Chrysostomos [Tue, 3 Jan 2012 00:43:59 +0000 (16:43 -0800)]
Correct test count in regen.t

10 years agoExplain perlguts changes in mg_vtable.pl comment
Father Chrysostomos [Tue, 3 Jan 2012 00:43:20 +0000 (16:43 -0800)]
Explain perlguts changes in mg_vtable.pl comment

10 years agoRegenerate perlguts’ mg table automatically
Father Chrysostomos [Tue, 3 Jan 2012 00:40:38 +0000 (16:40 -0800)]
Regenerate perlguts’ mg table automatically

regen/mg_vtable.pl was modified a while ago to generate the table
for copying and pasting, but at least twice since then it has not
been updated properly; once by me and once by the author of that
part of regen/mg_vtable.pl.

10 years agoperldelta for GV non-cloning
Father Chrysostomos [Mon, 2 Jan 2012 22:38:21 +0000 (14:38 -0800)]
perldelta for GV non-cloning

10 years agoperldelta for %n
Father Chrysostomos [Mon, 2 Jan 2012 22:36:41 +0000 (14:36 -0800)]
perldelta for %n

10 years agoperldelta for hash element deletion and destructors
Father Chrysostomos [Mon, 2 Jan 2012 22:34:22 +0000 (14:34 -0800)]
perldelta for hash element deletion and destructors

10 years agoperldelta for method deletion
Father Chrysostomos [Mon, 2 Jan 2012 22:32:15 +0000 (14:32 -0800)]
perldelta for method deletion

10 years agoperldelta for system SIGCHLD interference
Father Chrysostomos [Mon, 2 Jan 2012 22:30:30 +0000 (14:30 -0800)]
perldelta for system SIGCHLD interference

10 years agoperldelta for #! line errors
Father Chrysostomos [Mon, 2 Jan 2012 22:28:05 +0000 (14:28 -0800)]
perldelta for #! line errors

10 years agoperldelta for POSIX sigsuspend
Father Chrysostomos [Mon, 2 Jan 2012 22:24:20 +0000 (14:24 -0800)]
perldelta for POSIX sigsuspend

10 years agoperldelta: update status comment
Father Chrysostomos [Mon, 2 Jan 2012 22:18:34 +0000 (14:18 -0800)]
perldelta: update status comment

10 years agoperldelta for reifying tied arrays
Father Chrysostomos [Mon, 2 Jan 2012 22:16:48 +0000 (14:16 -0800)]
perldelta for reifying tied arrays

10 years agoperldelta for tied @DB::args
Father Chrysostomos [Mon, 2 Jan 2012 22:10:26 +0000 (14:10 -0800)]
perldelta for tied @DB::args

10 years agoperldelta for splain’s multiline support
Father Chrysostomos [Mon, 2 Jan 2012 22:06:21 +0000 (14:06 -0800)]
perldelta for splain’s multiline support

10 years agoperldelta for splain’s backtrace formatting
Father Chrysostomos [Mon, 2 Jan 2012 22:04:42 +0000 (14:04 -0800)]
perldelta for splain’s backtrace formatting

10 years agoperldelta for lvalue fixes
Father Chrysostomos [Mon, 2 Jan 2012 21:59:39 +0000 (13:59 -0800)]
perldelta for lvalue fixes

10 years agoperldelta for Data::Dumper and *{""}
Father Chrysostomos [Mon, 2 Jan 2012 21:48:15 +0000 (13:48 -0800)]
perldelta for Data::Dumper and *{""}

10 years agoperldelta for Data::Dumper and vstrings
Father Chrysostomos [Mon, 2 Jan 2012 21:47:09 +0000 (13:47 -0800)]
perldelta for Data::Dumper and vstrings

10 years agoperldelta for PerlIO::get_layers and numbers
Father Chrysostomos [Mon, 2 Jan 2012 21:44:24 +0000 (13:44 -0800)]
perldelta for PerlIO::get_layers and numbers

10 years agoperldelta for PerlIO::get_layers and get-magic
Father Chrysostomos [Mon, 2 Jan 2012 21:42:04 +0000 (13:42 -0800)]
perldelta for PerlIO::get_layers and get-magic

10 years agoperldelta for select fixes
Father Chrysostomos [Mon, 2 Jan 2012 21:40:29 +0000 (13:40 -0800)]
perldelta for select fixes

10 years agoperldelta for deparsing $( $| $) in regexps
Father Chrysostomos [Mon, 2 Jan 2012 21:36:05 +0000 (13:36 -0800)]
perldelta for deparsing $( $| $) in regexps

10 years agoperldelta for /$#a/ deparsing
Father Chrysostomos [Mon, 2 Jan 2012 21:34:47 +0000 (13:34 -0800)]
perldelta for /$#a/ deparsing

10 years agoperldelta for open(foo::bar) warning
Father Chrysostomos [Mon, 2 Jan 2012 21:32:52 +0000 (13:32 -0800)]
perldelta for open(foo::bar) warning

10 years agoperldelta for deparsing strict [perl #24027]
Father Chrysostomos [Mon, 2 Jan 2012 21:28:21 +0000 (13:28 -0800)]
perldelta for deparsing strict [perl #24027]

10 years agoperldelta for B::Deparse ambient_pragmas fix
Father Chrysostomos [Mon, 2 Jan 2012 21:26:35 +0000 (13:26 -0800)]
perldelta for B::Deparse ambient_pragmas fix

10 years agoperldelta for helem and hslice on null values
Father Chrysostomos [Mon, 2 Jan 2012 21:23:51 +0000 (13:23 -0800)]
perldelta for helem and hslice on null values

10 years agoCorrect comment in APItest’s hash.t
Father Chrysostomos [Mon, 2 Jan 2012 21:20:07 +0000 (13:20 -0800)]
Correct comment in APItest’s hash.t

10 years agoperldelta for newHVhv on tied hashes
Father Chrysostomos [Mon, 2 Jan 2012 21:18:51 +0000 (13:18 -0800)]
perldelta for newHVhv on tied hashes

10 years agoperldelta for deparsing features
Father Chrysostomos [Mon, 2 Jan 2012 21:17:14 +0000 (13:17 -0800)]
perldelta for deparsing features

10 years agoperldelta for feature revamp
Father Chrysostomos [Mon, 2 Jan 2012 20:57:46 +0000 (12:57 -0800)]
perldelta for feature revamp

10 years agoutf8_heavy.pl: Skip unnecessary work for official properties
Karl Williamson [Mon, 2 Jan 2012 23:12:21 +0000 (16:12 -0700)]
utf8_heavy.pl: Skip unnecessary work for official properties

The tables that mktables generates are well behaved, and so the checks
and sorting that are done for user-defined properties may be skipped.

tainting needs to be preserved because $list can be passed in already
tainted.

This is also in preparation for Unicode 6.1, in which one table will
legitimately have duplicate entries that the old code removed.

10 years agoutf8_heavy.pl: Comment and white-space only
Karl Williamson [Mon, 2 Jan 2012 22:44:37 +0000 (15:44 -0700)]
utf8_heavy.pl: Comment and white-space only

This code is indented in preparation to be placed in an enclosing
conditional.

10 years agoMerge the refactoring of installperl that fixes Pod installation bugs.
Nicholas Clark [Mon, 2 Jan 2012 17:26:39 +0000 (18:26 +0100)]
Merge the refactoring of installperl that fixes Pod installation bugs.

10 years agoNote the user-visible installperl changes in perldelta.
Nicholas Clark [Mon, 2 Jan 2012 17:02:38 +0000 (18:02 +0100)]
Note the user-visible installperl changes in perldelta.

10 years agoinstallperl now uses get_pod_metadata() to install dual-life pods correctly.
Nicholas Clark [Tue, 27 Dec 2011 18:44:27 +0000 (19:44 +0100)]
installperl now uses get_pod_metadata() to install dual-life pods correctly.

This ensures that perlfaq*, perlglossary, perlxs, perlxstut and perldoc's
Pod files are installed in the same directory as perl.pod, perlintro.pod etc,
as they were in 5.14.0 and earlier releases. This commit is analogous to
commit d6a39ee219352c8f, which corrected the install location for man pages.

10 years agoIn installperl, convert the File::Find::find(..., 'lib/') to no_chdir.
Nicholas Clark [Tue, 27 Dec 2011 15:48:53 +0000 (16:48 +0100)]
In installperl, convert the File::Find::find(..., 'lib/') to no_chdir.

This eliminates the localized variable $::depth, which really only existed
as a bodge to get plausible pathnames in the dry run output when run with
-n. (Note, not for the output when running for real without -n, nor for
the verbose output)

10 years agoIn installperl, don't chdir 'lib' before finding files in lib/
Nicholas Clark [Mon, 26 Dec 2011 13:05:13 +0000 (14:05 +0100)]
In installperl, don't chdir 'lib' before finding files in lib/

10 years agoIn installperl, add the trailing / to the value held in $::depth.
Nicholas Clark [Sat, 24 Dec 2011 13:52:50 +0000 (14:52 +0100)]
In installperl, add the trailing / to the value held in $::depth.

This should make future refactoring simpler.

10 years agoIn installperl, initialise $do_install{arch,priv}lib at their declarations.
Nicholas Clark [Sat, 24 Dec 2011 13:26:43 +0000 (14:26 +0100)]
In installperl, initialise $do_install{arch,priv}lib at their declarations.

Also, add an editor block.

10 years agoIn installperl, simplify the strip/chmod code for libraries on Darwin.
Nicholas Clark [Sat, 24 Dec 2011 12:40:24 +0000 (13:40 +0100)]
In installperl, simplify the strip/chmod code for libraries on Darwin.

10 years agoSanitise NetWare changes to installperl.
Nicholas Clark [Sat, 24 Dec 2011 10:53:02 +0000 (11:53 +0100)]
Sanitise NetWare changes to installperl.

Commit 2986a63f7e513cf3's changes to installperl could have been cleaner.
Consistently pass $opts{verbose} to all invocations of mkpath().
The skip logic for paths matching /\.(?:nlp|nlm|bs)$/ should have been
earlier, and should not have created copy&paste code duplication of the
calls to copy_if_diff() and chmod.

10 years agoAvoid t/re/regexp.t failing on miniperl when displaying TODO test output.
Nicholas Clark [Sun, 1 Jan 2012 16:48:29 +0000 (17:48 +0100)]
Avoid t/re/regexp.t failing on miniperl when displaying TODO test output.

Change 1e9285c2ad54ae39 refactored Data::Dumper to load on miniperl.
t/re/regexp.t attempts to load Data::Dumper (in an eval) to display failure
output, including the failure of TODO tests. Hence Data::Dumper is now loaded
without error as part of minitest, so regexp.t then attempts to use
Data::Dumper to output better diagnostics. This fails (hard) because
Data::Dumper attempts to load Scalar::Util, which attempts to load B, which
bails out because this is miniperl.

It's not obvious that there's a 100% solution here that gets full-on
Data::Dumper functionality for miniperl.

10 years agoIn diagnostics.t, avoid passing a literal \n in the command to run.
Nicholas Clark [Sun, 1 Jan 2012 20:35:33 +0000 (21:35 +0100)]
In diagnostics.t, avoid passing a literal \n in the command to run.

Express the one-liner with qq to interpolating \n to a newline character at
execution time, instead of q quoting a literal newline character. Passing
a literal newline character is not portable to all platforms.

10 years agoDon’t double-free GVs in gv:S_maybe_add_coresub
Father Chrysostomos [Sun, 1 Jan 2012 22:19:54 +0000 (14:19 -0800)]
Don’t double-free GVs in gv:S_maybe_add_coresub

Commit 8756617677 did not take into account that newSVOP steals a ref-
erence count.

10 years ago[perl #107366] Don’t clone GVs during thread join
Father Chrysostomos [Sun, 1 Jan 2012 21:57:06 +0000 (13:57 -0800)]
[perl #107366] Don’t clone GVs during thread join

unless they are orphaned.

This commit stops globs that still reside in their stashes from being
cloned during a join.

That way, a sub like sub{$::x++}, when cloned into a subthread and
returned from it, will still point to the same $::x.

This commit takes the conservative approach of copying on those globs
that can be found under their names in the original thread.

While this doesn’t work for all cases, it’s probably not possible to
make it work all the time.

10 years agoSimplify gv:S_maybe_add_coresub
Father Chrysostomos [Sun, 1 Jan 2012 21:06:27 +0000 (13:06 -0800)]
Simplify gv:S_maybe_add_coresub

It was working around the fact that newATTRSUB expects to be able to
look up the GV by name.

And for speed, it was going through hoops to try to avoid creating
extra SVs holding the name unnecessarily.

By tweaking newATTRSUB to accept a GV instead of a name, we can sim-
plify not only S_maybe_add_coresub but all its callers, too.

10 years agosigsystem.t depends on fork().
Craig A. Berry [Sun, 1 Jan 2012 14:40:54 +0000 (08:40 -0600)]
sigsystem.t depends on fork().

So don't run it if the function doesn't exist.

10 years agoSuppress void warning in t/op/sprintf.t
Father Chrysostomos [Sun, 1 Jan 2012 08:16:33 +0000 (00:16 -0800)]
Suppress void warning in t/op/sprintf.t

10 years agoCorrect comment in op.c
Father Chrysostomos [Sun, 1 Jan 2012 07:52:14 +0000 (23:52 -0800)]
Correct comment in op.c

‘Backward compatibility mode’ is poppycock, I’m afraid.  When part of
an argument list a sub call it may or may not be an lvalue.  That can-
not be determined until the value passed is (or is not) assigned to.
It has little to do with backward compatibility.

10 years ago[perl #103492] Make %n printf format work with Unicode
Father Chrysostomos [Sun, 1 Jan 2012 07:49:01 +0000 (23:49 -0800)]
[perl #103492] Make %n printf format work with Unicode

It was using the internal byte count instead of the number of charac-
ters.  The iatter is documented.  The former is useless, even for C
code calling this, as later arguments could cause the current buffer
to be upgraded to utf8, throwing off any offsets returned.

10 years ago[perl #103492] Give lvalue cx to (s)printf args
Father Chrysostomos [Sun, 1 Jan 2012 07:24:57 +0000 (23:24 -0800)]
[perl #103492] Give lvalue cx to (s)printf args

Or potential lvalue context, like function calls.

The %n format code’s existence renders these two very much like func-
tion calls, as they can modify their arguments.

This allows sprintf("...%n", substr ...) to work.

10 years ago[perl #103492] Correct docs for %n format in perlfunc
Father Chrysostomos [Sun, 1 Jan 2012 03:30:04 +0000 (19:30 -0800)]
[perl #103492] Correct docs for %n format in perlfunc

10 years agohv.c: Consistent spaces after dots in apidocs
Father Chrysostomos [Sun, 1 Jan 2012 03:20:17 +0000 (19:20 -0800)]
hv.c: Consistent spaces after dots in apidocs

10 years agoRemove method cache reset from hv.c:hv_free_ent
Father Chrysostomos [Sun, 1 Jan 2012 03:12:30 +0000 (19:12 -0800)]
Remove method cache reset from hv.c:hv_free_ent

It hasn’t been necessary since commit f50383f5.  Before that it wasn’t
sufficient.  See commit 5743f2a for details.

If a hash element is being deleted, S_hv_delete_common takes care of
this.  If a hash is being freed or cleared, hv_undef or hv_clear takes
care of it.

10 years agosquash some code in hv.c:S_hv_delete_common
Father Chrysostomos [Sun, 1 Jan 2012 02:58:29 +0000 (18:58 -0800)]
squash some code in hv.c:S_hv_delete_common

Changes four commits ago made this possible.

10 years ago[perl #100340] Free hash entries before values on delete
Father Chrysostomos [Sun, 1 Jan 2012 02:54:14 +0000 (18:54 -0800)]
[perl #100340] Free hash entries before values on delete

When a hash element is deleted in void context, if the value is freed
before the hash entry, it is possible for a destructor to see the hash
in an inconsistent state--inconsistent in that it contains entries
that are about to be freed, with nothing to indicate that.  So the
destructor itself could free the very same hash entry (e.g., by
freeing the hash), resulting in a double free, panic, or other
unpleasantness.

10 years agomro.c: Consistent use of spaces after dots in apidocs
Father Chrysostomos [Sun, 1 Jan 2012 02:46:37 +0000 (18:46 -0800)]
mro.c: Consistent use of spaces after dots in apidocs

10 years agomro.c: Use F<> for file names
Father Chrysostomos [Sun, 1 Jan 2012 02:44:23 +0000 (18:44 -0800)]
mro.c: Use F<> for file names

10 years agoUpdate method caches for non-void stash elem deletions
Father Chrysostomos [Sun, 1 Jan 2012 02:18:57 +0000 (18:18 -0800)]
Update method caches for non-void stash elem deletions

Commit 71be2cb (inseparable changes from patch from perl5.003_13 to
perl5.003_14) added code to hv_free_ent to reset method caches if
necessary.

Later, a bug fix in the deletion code (f50383f5) made it necessary for
the value in the HE to be set to &PL_sv_placeholder, so it wouldn’t
free the sv just yet.  So the method cache code (which by then had
changed from using PL_sub_generation to using mro_method_changed_in)
got repeated in S_hv_delete_common.

The only problem with all this is that hv_free_ent was the wrong place
to put it to begin with.  If delete is called in non-void context,
the sv in it is not freed just yet, but returned; so hv_free_ent was
already being called with a HE pointing to &PL_sv_placeholder.

Commit f50383f5 only added the mro code for the void case, to avoid
changing existing behaviour when rearranging the code.

It turns out it needs to be done in S_hv_delete_common uncon-
ditionally.

Changing a test in t/op/method.t to use ()=delete instead of delete
makes it fail, because method caches end up going stale.  See the test
in the diff.

10 years ago'S' case already exists with ALTERNATE_SHEBANG.
Craig A. Berry [Sun, 1 Jan 2012 00:28:46 +0000 (18:28 -0600)]
'S' case already exists with ALTERNATE_SHEBANG.

Follow-up to b7e077d0225eac833ce2eb6fe9e1807f77d0f848.

10 years agoCurrent VMS can handle filenames with spaces.
Craig A. Berry [Sat, 31 Dec 2011 23:36:02 +0000 (17:36 -0600)]
Current VMS can handle filenames with spaces.

If they are escaped and on an ODS-5 volume, that is. We
then have to clean up all versions of the files created
by a test we weren't running before.

10 years agosigsystem.t: put miniperl skip earlier
Father Chrysostomos [Sat, 31 Dec 2011 19:02:50 +0000 (11:02 -0800)]
sigsystem.t: put miniperl skip earlier

Under minitest, extensions like constant.pm and Data::Dumper
haven’t been processed yet, so they won’t be available.

10 years agoCorrect skip count in sigsystem.t
Father Chrysostomos [Sat, 31 Dec 2011 18:55:36 +0000 (10:55 -0800)]
Correct skip count in sigsystem.t

10 years agoAllow Data::Dumper to load on miniperl
Father Chrysostomos [Sat, 31 Dec 2011 18:53:10 +0000 (10:53 -0800)]
Allow Data::Dumper to load on miniperl

For a long time it has been doing eval { require XSLoader }, but
XSLoader will load on miniperl, it’s just XSLoader::load() that fails.

10 years agoIncrease $Data::Dumper::VERSION to 2.135_03
Father Chrysostomos [Sat, 31 Dec 2011 18:49:54 +0000 (10:49 -0800)]
Increase $Data::Dumper::VERSION to 2.135_03

I’m about to make a change, and 2.135_02 has already been used by a
CPAN dev release.

10 years agoBlock SIGCHLD during system() call (per POSIX)
Leon Timmermans [Thu, 8 Dec 2011 23:32:10 +0000 (00:32 +0100)]
Block SIGCHLD during system() call (per POSIX)

10 years agoAdded tests for SIGCHLD blocking during system()
Leon Timmermans [Fri, 30 Dec 2011 18:02:07 +0000 (20:02 +0200)]
Added tests for SIGCHLD blocking during system()

10 years agostrlcpy fix-ups in vms/vms.c following a35dcc95dd24.
Craig A. Berry [Sat, 31 Dec 2011 18:31:49 +0000 (12:31 -0600)]
strlcpy fix-ups in vms/vms.c following a35dcc95dd24.

In three places I was using the intended string length rather than
the buffer length as the length argument, and in one place I was
assuming the return value was the number of non-null bytes copied,
which is not true when you are intentionally copying only part of
the source string.  If strlcpy is supposed to be idiot-proof, they
clearly didn't anticipate the superior form of idiot I've proven
myself to be.

10 years agoUpdate Version-Requirements to CPAN version 0.101021
Chris 'BinGOs' Williams [Sat, 31 Dec 2011 01:11:58 +0000 (01:11 +0000)]
Update Version-Requirements to CPAN version 0.101021

  [DELTA]

  0.101021  2011-12-30 15:39:56 America/New_York
          DEPRECATED DEPRECATED DEPRECATED DEPRECATED

          Version::Requirements is now DEPRECATED

          Use CPAN::Meta::Requirements, which is a drop-in replacement.

10 years agoperldelta up to a65c7ff
Father Chrysostomos [Sat, 31 Dec 2011 05:49:42 +0000 (21:49 -0800)]
perldelta up to a65c7ff

10 years agoperldelta for deparsing "foo::]"->...
Father Chrysostomos [Sat, 31 Dec 2011 05:35:30 +0000 (21:35 -0800)]
perldelta for deparsing "foo::]"->...

10 years agoperldelta for tying empty %^H (cb1f05e8f)
Father Chrysostomos [Sat, 31 Dec 2011 05:32:50 +0000 (21:32 -0800)]
perldelta for tying empty %^H (cb1f05e8f)

10 years agoperldelta for deparsing "string"->[0]
Father Chrysostomos [Sat, 31 Dec 2011 05:30:41 +0000 (21:30 -0800)]
perldelta for deparsing "string"->[0]

10 years agoperldelta for deparsing open("string")
Father Chrysostomos [Sat, 31 Dec 2011 05:27:37 +0000 (21:27 -0800)]
perldelta for deparsing open("string")

10 years agoperldelta for safe %^H cloning
Father Chrysostomos [Sat, 31 Dec 2011 04:44:57 +0000 (20:44 -0800)]
perldelta for safe %^H cloning

10 years agoTest ‘Too late for -[Mm]’
Father Chrysostomos [Sat, 31 Dec 2011 04:28:43 +0000 (20:28 -0800)]
Test ‘Too late for -[Mm]’

10 years ago[perl #104288] Die with ‘Unrecognized switch’ on #! line
Father Chrysostomos [Sat, 31 Dec 2011 04:13:29 +0000 (20:13 -0800)]
[perl #104288] Die with ‘Unrecognized switch’ on #! line

If a switch such as -x that cannot occur on the shebang line is used
there, perl dies with ‘Can’t emulate...’.

If an unrecognised switch is used on the command line, perl dies with
‘Unrecognized switch...’.

It just happens to use the former error message for unrecognized
switches on the shebang line, which can be confusing:

$ perl -e '#!perl -G'
Can't emulate -G on #! line at -e line 1.

This commit changes it to output the same message as command-line
switches for those that are unrecognised wherever they are used.

10 years agoFix bad reference in sv.h’s docs
Father Chrysostomos [Sat, 31 Dec 2011 00:04:57 +0000 (16:04 -0800)]
Fix bad reference in sv.h’s docs

SvPVx should be referring to SvPV as the faster version, not SvPVX.

10 years agoUpdate Maintainers.pl for the CGI.pm update.
Chris 'BinGOs' Williams [Fri, 30 Dec 2011 22:38:24 +0000 (22:38 +0000)]
Update Maintainers.pl for the CGI.pm update.

10 years agoUpdate CPAN-Meta to CPAN version 2.113640
Chris 'BinGOs' Williams [Fri, 30 Dec 2011 22:37:19 +0000 (22:37 +0000)]
Update CPAN-Meta to CPAN version 2.113640

  [DELTA]

  2.113640  2011-12-30 15:19:46 America/New_York

  - Version::Requirements has now been merged as CPAN::Meta::Requirements,
    rendering Version::Requirements itself redundant

10 years ago[perl #107296] Document File::Glob’s default flags
Father Chrysostomos [Fri, 30 Dec 2011 22:40:36 +0000 (14:40 -0800)]
[perl #107296] Document File::Glob’s default flags

10 years agoIncrease $File::Glob::VERSION to 1.16
Father Chrysostomos [Fri, 30 Dec 2011 22:05:23 +0000 (14:05 -0800)]
Increase $File::Glob::VERSION to 1.16

10 years agoinclude a package POSIX::SigSet
Ricardo Signes [Fri, 30 Dec 2011 18:23:11 +0000 (13:23 -0500)]
include a package POSIX::SigSet

this is mostly for the benefit of the PAUSE indexer, as described
in the code comment

10 years agomktables: Fix bug for early Unicode versions
Karl Williamson [Fri, 30 Dec 2011 16:49:36 +0000 (09:49 -0700)]
mktables: Fix bug for early Unicode versions

mktables should be able to be run on any Unicode version.  Prior to this
patch, it was trying to do something unconditionally with the Name_Alias
property, whereas it should only do that on versions that have this
property.

10 years agomktables: Change function name
Karl Williamson [Fri, 30 Dec 2011 16:11:23 +0000 (09:11 -0700)]
mktables: Change function name

This is in preparation for Unicode 6.1 for which the new name will make
more sense.

10 years agomktables: Unicode 6.1 table will be empty
Karl Williamson [Fri, 30 Dec 2011 16:02:48 +0000 (09:02 -0700)]
mktables: Unicode 6.1 table will be empty

So, change mktables so it is expecting that.

10 years agomktables: Add comment
Karl Williamson [Fri, 30 Dec 2011 16:02:02 +0000 (09:02 -0700)]
mktables: Add comment