This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
perl5.git
10 years agoRemove the CvLVALUE check from pp_leavesub
Father Chrysostomos [Wed, 22 Jun 2011 15:32:36 +0000 (08:32 -0700)]
Remove the CvLVALUE check from pp_leavesub

As of bb3abb0, this can no longer happen.

10 years agoUpdate IO-Compress to CPAN version 2.037
Chris 'BinGOs' Williams [Wed, 22 Jun 2011 16:10:36 +0000 (17:10 +0100)]
Update IO-Compress to CPAN version 2.037

  [DELTA]

  2.037 22 June 2011

      * IO::Uncompress
        - get globmapper tests working on VMS
          [RT# 68926]

      * IO::Uncompress::Unzip
        - Fixed limitation where Streamed Stored content was not supported.

10 years agoUpdate Compress-Raw-Zlib to CPAN version 2.037
Chris 'BinGOs' Williams [Wed, 22 Jun 2011 15:53:47 +0000 (16:53 +0100)]
Update Compress-Raw-Zlib to CPAN version 2.037

  [DELTA]

  2.037 22 June 2011

      * No Changes

10 years agoUpdate Compress-Raw-Bzip2 to CPAN version 2.037
Chris 'BinGOs' Williams [Wed, 22 Jun 2011 15:50:10 +0000 (16:50 +0100)]
Update Compress-Raw-Bzip2 to CPAN version 2.037

  [DELTA]

  2.037 22 June 2011

      * No Changes

10 years agoUpdate IPC-Cmd to CPAN version 0.72
Chris 'BinGOs' Williams [Wed, 22 Jun 2011 15:41:43 +0000 (16:41 +0100)]
Update IPC-Cmd to CPAN version 0.72

  [DELTA]

  Changes for 0.72    Wed Jun 22 12:29:59 BST 2011
  =================================================
  * Added IPC::Open3 support for capturing STDOUT/STDERR
    on MSWin32, prefer this over IPC::Run

10 years agoattrs.t: Test for something I almost broke
Father Chrysostomos [Wed, 22 Jun 2011 15:19:55 +0000 (08:19 -0700)]
attrs.t: Test for something I almost broke

10 years agoattributes.pm: warn & don’t apply :lvalue to defined subs
Father Chrysostomos [Wed, 22 Jun 2011 06:02:25 +0000 (23:02 -0700)]
attributes.pm: warn & don’t apply :lvalue to defined subs

This is something that ‘sub foo :lvalue;’ declarations do.  This brings
attributes.pm in line with them.

See commits fff96ff and 885ef6f, ticket #68758, and
<364E1F98-FDCC-49A7-BADB-BD844626B8AE@cpan.org>.

10 years agoIncrease $attributes::version to 0.15
Father Chrysostomos [Tue, 21 Jun 2011 21:52:50 +0000 (14:52 -0700)]
Increase $attributes::version to 0.15

I’m about to make changes to it.

10 years agoIn Cwd.xs, swap to defaulting to disabled prototypes.
Nicholas Clark [Sat, 18 Jun 2011 14:34:50 +0000 (16:34 +0200)]
In Cwd.xs, swap to defaulting to disabled prototypes.

As only 1 function enables prototypes, it seems sensible to set the default to
the majority case.

10 years agoMerge the implementation of Cwd::{fastcwd,getcwd} using ALIAS.
Nicholas Clark [Sat, 18 Jun 2011 14:13:00 +0000 (16:13 +0200)]
Merge the implementation of Cwd::{fastcwd,getcwd} using ALIAS.

10 years agoIn Cwd.xs on VMS, don't compile bsd_realpath() at all.
Nicholas Clark [Sat, 18 Jun 2011 13:09:24 +0000 (15:09 +0200)]
In Cwd.xs on VMS, don't compile bsd_realpath() at all.

On VMS, call Perl_rmsexpand() directly from abs_path(), instead of making
bsd_realpath() a trivial wrapper to Perl_rmsexpand().

Initialise path at the point of declaration, instead of separately. Use
sv_setpv_mg() instead of sv_setpvn() with an explicit strlen(), changing
PUSHTARG to PUSHs(TARG) to avoid setting magic twice.

10 years agoAdd PERL_NO_GET_CONTEXT to Cwd.
Nicholas Clark [Sat, 18 Jun 2011 12:46:08 +0000 (14:46 +0200)]
Add PERL_NO_GET_CONTEXT to Cwd.

10 years agoIn Cwd::_win32_cwd() avoid a string eval when checking if we're miniperl.
Nicholas Clark [Sat, 18 Jun 2011 12:42:07 +0000 (14:42 +0200)]
In Cwd::_win32_cwd() avoid a string eval when checking if we're miniperl.

To allow ExtUtils::MakeMaker to run tests as if it's "miniperl" we need to avoid
taking any sort of reference to the typeglob or the code in the optree, as its
test modules are loaded later than Cwd. Previously this was done with a string
eval, but that was causing problems (for unclear reasons - rt.cpan.org #56225).
Using a symbol table lookup and *foo{THING} syntax avoids the string eval.

Evolved from a suggestion by Reini Urban.

10 years agoTrim multiple blank lines above =item in pod files.
Nicholas Clark [Wed, 22 Jun 2011 10:44:05 +0000 (12:44 +0200)]
Trim multiple blank lines above =item in pod files.

This makes many documents more consistent in their pod formatting. Don't trim
blank lines between verbatim blocks and =item, as removing them makes the (raw)
pod harder to read.

10 years agoThe podchecker much prefers a forward slash in F<symbian/TODO>
Nicholas Clark [Wed, 22 Jun 2011 09:56:50 +0000 (11:56 +0200)]
The podchecker much prefers a forward slash in F<symbian/TODO>

It looks for the file within the F<> - on *nix, 'symbian\TODO' doesn't exist,
so the line is flagged as a known issue. On Windows, it does exist (because
at the API level, / and \ are both valid as directory separators), so there is
no known issue, and the test fails with a request to delete the known issue.

README.symbian is not consistent in its use of backward or forward slashes
inside F<> markup, so this isn't the first use of a forward slash.

(The podchecker has other exemption rules for F<>, hence why this doesn't
matter in some cases.)

10 years agoUpdate IO-Compress to CPAN version 2.036
Chris 'BinGOs' Williams [Tue, 21 Jun 2011 20:41:34 +0000 (21:41 +0100)]
Update IO-Compress to CPAN version 2.036

  [DELTA]

  2.036 18 June 2011

      * IO::Compress::Zip & IO::Uncompress::Unzip
        - Added support for LZMA (method 14) compression/uncompresion.

      * IO::Compress::Unzip
        - Fixed CRC issue when compression is Store or Bzip2 and Strict option
          is set.

      * IO::Compress::Zip
        - Fixed Zip64 issue where the content size is exactly 0xFFFFFFFF

10 years agoUpdate Compress-Raw-Zlib to CPAN version 2.036
Chris 'BinGOs' Williams [Tue, 21 Jun 2011 20:29:05 +0000 (21:29 +0100)]
Update Compress-Raw-Zlib to CPAN version 2.036

   [DELTA]

    2.036 6 May 2011

       * Added offset parameter to CRC32

10 years agoUpdate Compress-Raw-Bzip2 to CPAN version 2.036
Chris 'BinGOs' Williams [Tue, 21 Jun 2011 20:15:55 +0000 (21:15 +0100)]
Update Compress-Raw-Bzip2 to CPAN version 2.036

  [DELTA]

   2.036 18 June 2011

       * No Changes

10 years agopodcheck.t: ignore buildtoc output
Father Chrysostomos [Tue, 21 Jun 2011 20:37:45 +0000 (13:37 -0700)]
podcheck.t: ignore buildtoc output

10 years agoRe-clarify the pod.lst instruction
Father Chrysostomos [Tue, 21 Jun 2011 19:46:55 +0000 (12:46 -0700)]
Re-clarify the pod.lst instruction

Well, it was unclear enough that I misunderstood it and my
previous clarification was wrong.  This corrects it.

10 years agoStop ‘sub :lvalue :Foo’ from applying :lvalue to defined subs
Father Chrysostomos [Tue, 21 Jun 2011 20:33:47 +0000 (13:33 -0700)]
Stop ‘sub :lvalue :Foo’ from applying :lvalue to defined subs

This is something that commit 885ef6f missed.  See ticket #68758 and
the perldelta diff in this commit.

I thought that the prototype-application inconsistencies mention in
<2C7C1BF5-A814-4F5E-B10E-E431B71BA8CA@cpan.org> would get in the way
of this, but I found that the easiest way to fix it actually did not
change any of that.  So those issues can wait till another day.

10 years agoRe-flow some sample text in the perldelta template to avoid an overlong line.
Nicholas Clark [Tue, 21 Jun 2011 19:50:32 +0000 (21:50 +0200)]
Re-flow some sample text in the perldelta template to avoid an overlong line.

Porting/perldelta_template.pod is exempt from t/porting/podchecker.t, but when
its contents are copied as pod/perldelta.pod, that file is not. This change
reduces the amount of work the release manager needs to do to create a new
perldelta.

10 years agoAdd perldelta "known issues" to the podchecker exception list.
Nicholas Clark [Tue, 21 Jun 2011 18:54:21 +0000 (20:54 +0200)]
Add perldelta "known issues" to the podchecker exception list.

Porting/perldelta_template.pod is exempted from t/porting/podchecker.t
Hence when it is copied to pod/perldelta.pod, exceptions need to be added for
certain template boilerplate it contains, which are not valid pod
(but ultimately will be edited out before the release).

This doesn't seem ideal, but I'm not sure of a better way to do this.

10 years agoAdd perl5151delta to pod.lst and regenerate makefiles.
Nicholas Clark [Tue, 21 Jun 2011 17:51:51 +0000 (19:51 +0200)]
Add perl5151delta to pod.lst and regenerate makefiles.

10 years agoClarify the pod.lst instruction in rm guide
Father Chrysostomos [Tue, 21 Jun 2011 15:43:11 +0000 (08:43 -0700)]
Clarify the pod.lst instruction in rm guide

10 years agoGrrr! I always forget to add new files
Father Chrysostomos [Tue, 21 Jun 2011 15:41:54 +0000 (08:41 -0700)]
Grrr! I always forget to add new files

10 years ago[perl #78462] Don't warn for splice(@a,MAX_LEN)
Eric Brine [Wed, 2 Mar 2011 22:30:17 +0000 (17:30 -0500)]
[perl #78462] Don't warn for splice(@a,MAX_LEN)

The intent of splice(@a,MAX_LEN) is quite clearly to truncate
the array if it's too large. There's no reason to warn if it's
currently smaller than the max length.

10 years agocreate perldelta for 5.15.1
Father Chrysostomos [Tue, 21 Jun 2011 15:37:04 +0000 (08:37 -0700)]
create perldelta for 5.15.1

10 years agoIncrease $Storable::VERSION to 2.29
Father Chrysostomos [Tue, 21 Jun 2011 05:31:01 +0000 (22:31 -0700)]
Increase $Storable::VERSION to 2.29

10 years agoAdd Sam Kimbrel to AUTHORS
Father Chrysostomos [Tue, 21 Jun 2011 05:26:08 +0000 (22:26 -0700)]
Add Sam Kimbrel to AUTHORS

10 years ago[perl #92432] Storable::nfreeze shouldn't stringify ints
Sam Kimbrel [Tue, 21 Jun 2011 05:24:42 +0000 (22:24 -0700)]
[perl #92432] Storable::nfreeze shouldn't stringify ints

Storable::nfreeze's integer size check doesn't work correctly:

Using nfreeze to store an int larger than one byte produces a
frozen representation that thaws into a stringified integer, without
my having done string operations on the scalar beforehand.

I've confirmed this bug with the three versions I had available to me:
5.8.9 on 64-bit CentOS 4, 5.12.1 on 64-bit OS X 10.6, and
5.14.0 on 64-bit Debian squeeze.

The constants involved in the comparisons get created as 32-bit integers,
which wrap around and cause the comparison to yield true when it shouldn't.

This patch casts the constants before using them, which should make this
port correctly to 64-bit architectures. Running tests on a 64-bit Debian
host shows no problems.

10 years agoIn pod/buildtoc, use abs_from_top() to generate pathnames.
Nicholas Clark [Tue, 21 Jun 2011 15:00:52 +0000 (17:00 +0200)]
In pod/buildtoc, use abs_from_top() to generate pathnames.

88fb56ecc95f23db used 'pod/perldelta.pod' instead of abs_from_top(), and broke
the build on Win32, which runs buildtoc from the win32 directory.

10 years agoupdate Time-HiRes to CPAN version 1.9724
Zefram [Tue, 21 Jun 2011 13:52:32 +0000 (14:52 +0100)]
update Time-HiRes to CPAN version 1.9724

- Correct XS parameter list, and therefore prototype, for
  unimplemented-on-this-platform version of clock_nanosleep()
  [rt.cpan.org #68700].
- Declare package variables with "our" rather than "use vars".
- Corresponding to "our" usage, check for minimum Perl version
  5.006.
- Declare module dependencies.

- Remove $ENV{PERL_CORE} logic from test suite, which is no
  longer desired in the core.
- Convert test suite to use Test::More.
- Factor out watchdog code from test suite.
- In test suite, be consistent about using fully-qualified form
  of function names.
- Divide test suite into feature-specific scripts.
- Make ualarm timing test less vulnerable to delay-induced false
  failure, from Dave Mitchell.

10 years agoupdate Math-Complex to CPAN version 1.58
Zefram [Tue, 21 Jun 2011 13:37:37 +0000 (14:37 +0100)]
update Math-Complex to CPAN version 1.58

* Declare package variables with "our" rather than "use vars".

* Corresponding to "our" usage, check for minimum Perl version
  5.006.

* Remove $ENV{PERL_CORE} logic from test suite, which is no
  longer desired in the core.

* In test suite, remove obsolete and now-incomplete handling of
  unavailability of Test::More.

* Declare module dependencies.

10 years agoupdate release schedule document
David Golden [Tue, 21 Jun 2011 14:50:33 +0000 (10:50 -0400)]
update release schedule document

10 years agoperlunicode: Narrow verabitm lines so don't wrap
Karl Williamson [Mon, 20 Jun 2011 19:35:38 +0000 (13:35 -0600)]
perlunicode: Narrow verabitm lines so don't wrap

For 80 columns, this collection of spacing changes keeps all
lines in this pod from wrapping.

10 years agopodcheck.t: sort --add_link output
Karl Williamson [Mon, 20 Jun 2011 01:56:41 +0000 (19:56 -0600)]
podcheck.t: sort --add_link output

The recently added --add_link option just appended lines to the end of
the data base file.  While this works, it means that the next time the
db is regen'd, that they will move around and show up in difference
listings unrelated to the original patch, thus potentially confusing
people.

10 years agopodcheck.t: Reduce F<> message false positives
Karl Williamson [Sun, 19 Jun 2011 19:12:18 +0000 (13:12 -0600)]
podcheck.t: Reduce F<> message false positives

podcheck looks for things that might be file path references which
are enclosed in C<> instead of F<>.  But there are some things that
aren't paths that have slashes in them, like "origin/blead"  This
adds some more of these.

10 years agopodcheck.t: White-space only changes
Karl Williamson [Sun, 19 Jun 2011 19:11:25 +0000 (13:11 -0600)]
podcheck.t: White-space only changes

10 years agopodcheck: Reduce fals positives for L<> message
Karl Williamson [Sun, 19 Jun 2011 19:06:22 +0000 (13:06 -0600)]
podcheck: Reduce fals positives for L<> message

podcheck looks for things like "See C<INSTALL>" and flags them as
perhaps L<> should have been used instead.  It was giving false
positives for things like "if you do x, you should see C<foo>".  This
catches those.

10 years agopodcheck: Fix skip upstream cpan
Karl Williamson [Sun, 19 Jun 2011 18:48:51 +0000 (12:48 -0600)]
podcheck: Fix skip upstream cpan

Normally upstream cpan modules are not pod checked, but in the
one case where two had the same name, an error was generated
nonetheless.

10 years agopodcheck.t: Fewer false positives for L<>
Karl Williamson [Sun, 19 Jun 2011 16:20:32 +0000 (10:20 -0600)]
podcheck.t: Fewer false positives for L<>

If there is a F<foo/bar> and a file named bar in the directory foo
exists, then assume that is what was meant, instead of raising
the possibility that L<> was meant.

10 years agopodcheck.t: Suppress all L<> messages for config.pod
Karl Williamson [Sun, 19 Jun 2011 16:12:11 +0000 (10:12 -0600)]
podcheck.t: Suppress all L<> messages for config.pod

config.pod is a generated file that just adds C<> around all-caps words.
Until such time as it is made smarter to use L<> for links instead,
just suppress the messages that L<> might be better.

10 years agoFile::Find pod: fix link issue
Karl Williamson [Sat, 18 Jun 2011 20:34:55 +0000 (14:34 -0600)]
File::Find pod: fix link issue

10 years agoREADME.macosx: Change C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 20:26:08 +0000 (14:26 -0600)]
README.macosx: Change C<> into F<>

10 years agoperlapi: fix broken link, from sv.c
Karl Williamson [Sat, 18 Jun 2011 20:06:32 +0000 (14:06 -0600)]
perlapi: fix broken link, from sv.c

10 years agoREADME.ce: Change some C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 20:03:17 +0000 (14:03 -0600)]
README.ce: Change some C<> into F<>

10 years agoperlcygwin: Fix broken link
Karl Williamson [Sat, 18 Jun 2011 19:54:56 +0000 (13:54 -0600)]
perlcygwin: Fix broken link

10 years agoperlfunc: Fix some link issues
Karl Williamson [Sat, 18 Jun 2011 19:51:31 +0000 (13:51 -0600)]
perlfunc: Fix some link issues

10 years agoperlhack: Change some C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 19:41:14 +0000 (13:41 -0600)]
perlhack: Change some C<> into F<>

10 years agoperlhaiku: Change some C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 19:39:32 +0000 (13:39 -0600)]
perlhaiku: Change some C<> into F<>

10 years agomake_patchnum.pl: Change some C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 19:37:20 +0000 (13:37 -0600)]
make_patchnum.pl: Change some C<> into F<>

10 years agoperltodo: Change some C<> into F<>
Karl Williamson [Sat, 18 Jun 2011 19:32:33 +0000 (13:32 -0600)]
perltodo: Change some C<> into F<>

10 years agoperlrun: Fix some link issues
Karl Williamson [Sat, 18 Jun 2011 17:03:00 +0000 (11:03 -0600)]
perlrun: Fix some link issues

10 years agoperlunifaq: Use L<> to actual link instead of C<>
Karl Williamson [Sat, 18 Jun 2011 16:59:44 +0000 (10:59 -0600)]
perlunifaq: Use L<> to actual link instead of C<>

10 years agoperlxs: Fix broken link
Karl Williamson [Sat, 18 Jun 2011 16:57:22 +0000 (10:57 -0600)]
perlxs: Fix broken link

10 years agopodcheck.t: Fix typo
Karl Williamson [Sat, 18 Jun 2011 16:51:30 +0000 (10:51 -0600)]
podcheck.t: Fix typo

The match for the ">" that ends a C<> was misplaced, and should be
after looking for a file suffix.  This caused some messages to be missed

10 years agopodcheck: Dashes often occur in file names
Karl Williamson [Sat, 18 Jun 2011 16:47:08 +0000 (10:47 -0600)]
podcheck: Dashes often occur in file names

10 years agoperlretut: Fix link problem
Karl Williamson [Sat, 18 Jun 2011 19:16:59 +0000 (13:16 -0600)]
perlretut: Fix link problem

10 years agopodcheck: Improve heuristics for L<>
Karl Williamson [Sat, 18 Jun 2011 16:36:49 +0000 (10:36 -0600)]
podcheck: Improve heuristics for L<>

podcheck.t uses heuristics to decide if something like a C<> should
instead be a L<>.  As noted in the comments, this adds some more checks
to eliminate some false positives

10 years agoNo need for D and d flags in pod.lst - source is fixed, and contains the target
Nicholas Clark [Tue, 21 Jun 2011 09:46:00 +0000 (11:46 +0200)]
No need for D and d flags in pod.lst - source is fixed, and contains the target

As the edited perldelta is now always pod/perldelta.pod (instead of a file with
version numbers in it), we don't need a 'D' flag to mark it. As perldelta.pod
contains within itself the number of the version it refers to, we can use that
to infer the 'd' flag for the target filename.

This simplifies the release manager's tasklist for version bumping.

10 years agoRecord L<YAML::Syck> as a link to a known external module.
Nicholas Clark [Tue, 21 Jun 2011 08:37:49 +0000 (10:37 +0200)]
Record L<YAML::Syck> as a link to a known external module.

Previously it was seen as a broken link, and a "known issue" flagged against
perldelta, permitting podcheck.t to pass.

10 years agoUpdate epigraphs.pod for 5.15.0
David Golden [Tue, 21 Jun 2011 06:22:22 +0000 (02:22 -0400)]
Update epigraphs.pod for 5.15.0

10 years agopodcheck.t: update known issues v5.15.0
David Golden [Mon, 20 Jun 2011 23:07:28 +0000 (19:07 -0400)]
podcheck.t: update known issues

10 years agoperldelta: note YAML::Syck as known issue
David Golden [Mon, 20 Jun 2011 22:45:53 +0000 (18:45 -0400)]
perldelta: note YAML::Syck as known issue

10 years agoperldelta: put some things in C<> tags
David Golden [Mon, 20 Jun 2011 21:15:11 +0000 (17:15 -0400)]
perldelta: put some things in C<> tags

10 years agoperlhist: add 5.15.0 and 5.14.1 entries
David Golden [Mon, 20 Jun 2011 21:04:13 +0000 (17:04 -0400)]
perlhist: add 5.15.0 and 5.14.1 entries

10 years agoFix for slight inconsistency in perldelta
Chris 'BinGOs' Williams [Mon, 20 Jun 2011 21:14:19 +0000 (22:14 +0100)]
Fix for slight inconsistency in perldelta

10 years agoperldelta: removed confusing XSLoader commentary
David Golden [Mon, 20 Jun 2011 21:01:00 +0000 (17:01 -0400)]
perldelta: removed confusing XSLoader commentary

10 years agoperldelta: add Math::Trig to entry for Math::Complex
David Golden [Mon, 20 Jun 2011 20:59:50 +0000 (16:59 -0400)]
perldelta: add Math::Trig to entry for Math::Complex

10 years agoUpdate Module::CoreList for 5.15.0
David Golden [Mon, 20 Jun 2011 20:55:55 +0000 (16:55 -0400)]
Update Module::CoreList for 5.15.0

10 years agoperldelta: final draft
David Golden [Mon, 20 Jun 2011 20:45:06 +0000 (16:45 -0400)]
perldelta: final draft

10 years agoperldelta: additional pre-release amendments
David Golden [Mon, 20 Jun 2011 20:31:51 +0000 (16:31 -0400)]
perldelta: additional pre-release amendments

10 years agoupdate Changes with 5.15.0 references
David Golden [Mon, 20 Jun 2011 19:58:14 +0000 (15:58 -0400)]
update Changes with 5.15.0 references

10 years agoupdate INSTALL with 5.15.0 references
David Golden [Mon, 20 Jun 2011 19:56:32 +0000 (15:56 -0400)]
update INSTALL with 5.15.0 references

10 years agotweak perlhack and update known POD issues
David Golden [Mon, 20 Jun 2011 19:52:55 +0000 (15:52 -0400)]
tweak perlhack and update known POD issues

10 years agoUpdate CUSTOMIZED in Maintainers.pl
David Golden [Mon, 20 Jun 2011 19:37:31 +0000 (15:37 -0400)]
Update CUSTOMIZED in Maintainers.pl

Several cpan-upstream distributions had patches directly in blead
that do not match the upstream distribution.  These are all
now noted as CUSTOMIZED for future tracking.

10 years agoMaintainers.PL: update Getopt::Long CUSTOMIZED
David Golden [Mon, 20 Jun 2011 19:02:50 +0000 (15:02 -0400)]
Maintainers.PL: update Getopt::Long CUSTOMIZED

10 years agoRevert autodie version bump
David Golden [Mon, 20 Jun 2011 18:45:37 +0000 (14:45 -0400)]
Revert autodie version bump

autodie has not changed from CPAN, though blead has locally patched
a single test file to avoid a platform specific failure.

This change keeps the original CPAN version numbering, as the
local test file patch is now tracked in Porting/Maintainers.pl

10 years agoAdd CUSTOMIZED for autodie and CGI
David Golden [Mon, 20 Jun 2011 18:43:56 +0000 (14:43 -0400)]
Add CUSTOMIZED for autodie and CGI

10 years agoImprove tracking of cpan-upstream overrides
David Golden [Mon, 20 Jun 2011 18:40:47 +0000 (14:40 -0400)]
Improve tracking of cpan-upstream overrides

We have the CUSTOMIZED field in Maintainers.pl for indicating where we
expect blead to differ from a CPAN tarball.  This commit documents that
in perlhack and makes core-cpan-diff more aggressive about checking it
and reporting about it.

10 years agoperldelta: pre-release partial cleanup
David Golden [Mon, 20 Jun 2011 17:39:42 +0000 (13:39 -0400)]
perldelta: pre-release partial cleanup

10 years agoTalk to Leo about dev.perl.org, not Rafael
Leon Brocard [Mon, 20 Jun 2011 14:09:17 +0000 (15:09 +0100)]
Talk to Leo about dev.perl.org, not Rafael

10 years agoCreate pod/perl5125delta.pod
Leon Brocard [Mon, 20 Jun 2011 13:44:46 +0000 (14:44 +0100)]
Create pod/perl5125delta.pod

10 years agoAdd the 5.12.4 epigraph to Porting/epigraphs.pod
Leon Brocard [Mon, 20 Jun 2011 13:06:19 +0000 (14:06 +0100)]
Add the 5.12.4 epigraph to Porting/epigraphs.pod

10 years agoAdd 5.12.4 release date to pod/perlhist.pod
Leon Brocard [Mon, 20 Jun 2011 07:12:13 +0000 (08:12 +0100)]
Add 5.12.4 release date to pod/perlhist.pod

10 years agoAdd release date for 5.12.4 to lib/Module/CoreList.pm
Leon Brocard [Mon, 20 Jun 2011 07:01:54 +0000 (08:01 +0100)]
Add release date for 5.12.4 to lib/Module/CoreList.pm

10 years agoAdd Shigeya Suzuki’s new address to checkAUTHORS.pl
Father Chrysostomos [Mon, 20 Jun 2011 01:07:23 +0000 (18:07 -0700)]
Add Shigeya Suzuki’s new address to checkAUTHORS.pl

10 years agoauthor email address change
Shigeya Suzuki [Mon, 20 Jun 2011 01:05:50 +0000 (18:05 -0700)]
author email address change

10 years agoperldelta template: who are -> who will be
Father Chrysostomos [Sun, 19 Jun 2011 21:06:35 +0000 (14:06 -0700)]
perldelta template: who are -> who will be

10 years agoperldelta: who are -> who will be
Father Chrysostomos [Sun, 19 Jun 2011 21:05:59 +0000 (14:05 -0700)]
perldelta: who are -> who will be

10 years agoperl513*delta, perl5140delta: who are -> who will be
Father Chrysostomos [Sun, 19 Jun 2011 21:04:02 +0000 (14:04 -0700)]
perl513*delta, perl5140delta: who are -> who will be

10 years agoperldelta up to 5.12: who are -> who will be
Father Chrysostomos [Sun, 19 Jun 2011 20:46:30 +0000 (13:46 -0700)]
perldelta up to 5.12: who are -> who will be

10 years agoperldelta updates for some build improvements and internal changes.
Nicholas Clark [Sun, 19 Jun 2011 09:46:38 +0000 (11:46 +0200)]
perldelta updates for some build improvements and internal changes.

10 years agoCorrect the magic table in perlguts.pod following f34d15629da26eee.
Nicholas Clark [Sun, 19 Jun 2011 09:03:01 +0000 (11:03 +0200)]
Correct the magic table in perlguts.pod following f34d15629da26eee.

Unfortunately this remains a manual step, as there's a strong distinction
between (100%) generated files that we need to ship, which the regen scripts are
allowed to wipe and replace, and any files subject to human editing, which they
aren't.

10 years agoanother perldelta typo
Father Chrysostomos [Sun, 19 Jun 2011 02:40:01 +0000 (19:40 -0700)]
another perldelta typo

10 years agotwo perldelta fixes
Father Chrysostomos [Sun, 19 Jun 2011 02:33:33 +0000 (19:33 -0700)]
two perldelta fixes

while, not when

What are apple developer tools? Tools for developing apples? For
grafting, perhaps? :-)

10 years agoIncrease stylistic consistency in perldelta by adding C<> and F<>.
Nicholas Clark [Sat, 18 Jun 2011 21:06:43 +0000 (23:06 +0200)]
Increase stylistic consistency in perldelta by adding C<> and F<>.

Correct the stated initial version of COW shared hash key scalars - the first
stable release they were in was 5.8.0, as they were added by Nick Ing-Simmons
in September 2002 in commit 1c846c1f6d96d2ca.

10 years agoperldelta: Minor pod fixes
Karl Williamson [Sat, 18 Jun 2011 18:07:59 +0000 (12:07 -0600)]
perldelta: Minor pod fixes

Commit a1e75797c204ade843c6eb8052cc5577af06c1d6 changed L<Shell>
to C<Shell>, but in reality there still is a Shell module accessible
from L<>, because L<> looks through all of CPAN.  podcheck.t has
to know that it's accessible, and that was done with commit
ce98560028e1830366c9182fe9dd70ec264fe6ee.

Also make the reference to Devel::DProf from C<> to L<> for symmetry.

And, a file reference should be enclosed in F<> and not C<>

10 years agoPrefer the system gcc when searching for libraries such as -lm
Nicholas Clark [Wed, 15 Jun 2011 15:24:43 +0000 (16:24 +0100)]
Prefer the system gcc when searching for libraries such as -lm

40f026236b9959b7 added code to the Linux hints file to use gcc to locate
libraries such as -lm. However, if the user has their own gcc earlier in $PATH
than the system gcc, we don't want its libraries. So try to prefer the system
gcc.