From: Jarkko Hietaniemi Date: Thu, 12 Jul 2001 18:09:17 +0000 (+0000) Subject: Add README.uts from Hal Morris. X-Git-Tag: perl-5.7.2~28 X-Git-Url: https://perl5.git.perl.org/perl5.git/commitdiff_plain/9114410391472d028f1e143da740e860c5045bb1 Add README.uts from Hal Morris. p4raw-id: //depot/perl@11324 --- diff --git a/MANIFEST b/MANIFEST index f552fe6..7e291a8 100644 --- a/MANIFEST +++ b/MANIFEST @@ -1821,6 +1821,7 @@ README.qnx Notes about QNX port README.solaris Notes about Solaris port README.threads Notes about multithreading README.tru64 Notes about Tru64 +README.uts Notes about UTS README.vmesa Notes about VM/ESA port README.vms Notes about installing the VMS port README.vos Notes about Stratus VOS port diff --git a/README.uts b/README.uts new file mode 100644 index 0000000..2025e37 --- /dev/null +++ b/README.uts @@ -0,0 +1,107 @@ +If you read this file _as_is_, just ignore the funny characters you +see. It is written in the POD format (see perlpod manpage) which is +specially designed to be readable as is. + +=head1 NAME + +perluts - Perl under UTS + +=head1 SYNOPSIS + +This document can be read I: as F, or you +can read it after you build your package using "man perluts". + +The purpose is to help you build Perl for UTS, which, if you +follow these instructions, should be easy, and result in +a solidly working installation. + +=head1 DESCRIPTION + +Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS + +=head1 BUILDING PERL ON UTS + +NOTE: Some sites have redefined the way uname works, and if yours +does this, special steps must be taken so that Configure can +recognize your system as a UTS system. To see if you are in +this category, issue the command "uname -a". It should look +something like: + + uts juno 4 4.4 9672 370 + +At any rate, the first field should be "uts". If this is not +the case; supposing it is, say telcoUTS, create a script, uts/uname +(i.e. uname, in the subdirectory "uts" of the main Perl source dir): + # uname + /usr/bin/uname "$@" | sed -e 's/^telcoUTS/uts/' + +and when you execute Configure, do it as below, except for adding +PATH=uts:$PATH as a prefix. I.e. do: + + PATH=uts:$PATH ./Configure ... + +There is no need to do an interactive configure, just type + + ./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out + +"-Dusedevel" may be required to configure Perl 5.7.2 non-interactively. +Use -Doptimize=-g if you want to run Perl under sdb or gdb, OR +if you want to be able to use the -D command line flags to perl, +which are occasionally useful in debugging perl scripts. + +In this and the following steps, the "2>&1 | tee XXX.out" records all +output from the process, which will be useful if anything unexpected +goes wrong. + +Then do the compilation with + + make 2>&1 | tee make.out + +Finally, test using + + make test 2>&1 | tee make-test.out + +In the output, the only failures you should see should look like: + + lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ... + FAILED at test 57 + lib/Math/BigInt/t/bigintc..........ok + lib/Math/BigInt/t/bigintpm.........FAILED at test 204 + lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ... + Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314. + FAILED at test 71 + lib/Math/Complex...................exp: OVERFLOW + FAILED at test 250 + lib/Math/Trig......................exp: OVERFLOW + ok + lib/Memoize/t/array................ok + ... + lib/Net/protoent...................ok + lib/Net/servent....................FAILED at test 0 + +This means that everything passes except for some problems in the +packages "Math::BigInt", "Math::Complex", and "Math::Trig". +The lib/Net/servent failure seems to be a bug in the test +program. To confirm this, from the main Perl source dir, do: + + LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t + +and it should output + + 1..3 + ok 1 + ok 2 + ok 3 + +=head1 Installing the built perl on UTS + +Run the command "make install" + +=head1 AUTHOR + + Hal Morris + UTS Global LLC + email: hom00@utsglobal.com + +=cut + diff --git a/pod/buildtoc.PL b/pod/buildtoc.PL index 7b54ed3..8bec944 100644 --- a/pod/buildtoc.PL +++ b/pod/buildtoc.PL @@ -82,6 +82,7 @@ if (-d "pod") { perlplan9 perlsolaris perltru64 + perluts perlvmesa perlvms perlvos diff --git a/pod/perl.pod b/pod/perl.pod index 6138274..634a38b 100644 --- a/pod/perl.pod +++ b/pod/perl.pod @@ -131,6 +131,7 @@ For ease of access, the Perl manual has been split up into several sections: perlqnx Perl notes for QNX perlsolaris Perl notes for Solaris perltru64 Perl notes for Tru64 + perluts Perl notes for UTS perlvmesa Perl notes for VM/ESA perlvms Perl notes for VMS perlvos Perl notes for Stratus VOS diff --git a/pod/perl572delta.pod b/pod/perl572delta.pod index 18cc96a..66e87f0 100644 --- a/pod/perl572delta.pod +++ b/pod/perl572delta.pod @@ -678,15 +678,7 @@ These tests fail because of yet unresolved floating point inaccuracies. =head2 UTS -Many floating point inaccuracies: - - op/numconvert 511,657,658,659,665-667,831,991,1151 - op/pack 10,22,149,156 - op/sprintf 8,10,13,102-107,134-135,146-153,159-162 - lib/Math/BigInt/bigintpm 1145,1183 - lib/Math/Complex 250,257,514,521,722-724, - 934,935,945,949,955,956,975,976 - ext/POSIX/POSIX 14 +There are a few known test failures, see L. =head2 VMS diff --git a/pod/perltoc.pod b/pod/perltoc.pod index 0cc4170..869975c 100644 --- a/pod/perltoc.pod +++ b/pod/perltoc.pod @@ -2241,8 +2241,8 @@ Term::Complete, Term::ReadLine, Test, Test::Harness, Test::More, Test::Simple, Text::Abbrev, Text::Balanced, Text::ParseWords, Text::Soundex, Text::Tabs, Text::Wrap, Tie::Array, Tie::Handle, Tie::Hash, Tie::RefHash, Tie::Scalar, Tie::SubstrHash, Time::Local, Time::gmtime, -Time::localtime, Time::tm, UNIVERSAL, Unicode::UCD, User::grent, -User::pwent, Win32 +Time::localtime, Time::tm, UNIVERSAL, UnicodeCD, User::grent, User::pwent, +Win32 =item Extension Modules @@ -6670,6 +6670,22 @@ Digital UNIX formerly known as DEC OSF/1) systems =back +=head2 perluts - Perl under UTS + +=over 4 + +=item SYNOPSIS + +=item DESCRIPTION + +=item BUILDING PERL ON UTS + +=item Installing the built perl on UTS + +=item AUTHOR + +=back + =head2 perlvmesa, README.vmesa - building and installing Perl for VM/ESA. =over 4 @@ -8917,7 +8933,8 @@ C, C, C, C, C C, C, C, C, C, C, C, C, -C, C, C, C, C +C, C, C, +C, C, C =item x diff --git a/win32/Makefile b/win32/Makefile index c103f82..a6be3f4 100644 --- a/win32/Makefile +++ b/win32/Makefile @@ -1,1139 +1,1141 @@ -# -# Makefile to build perl on Windows NT using Microsoft NMAKE. -# Supported compilers: -# Visual C++ 5.x (possibly other versions) -# -# This is set up to build a perl.exe that runs off a shared library -# (perl57.dll). Also makes individual DLLs for the XS extensions. -# - -## -## Make sure you read README.win32 *before* you mess with anything here! -## - -## -## Build configuration. Edit the values below to suit your needs. -## - -# -# Set these to wherever you want "nmake install" to put your -# newly built perl. -# -INST_DRV = c: -INST_TOP = $(INST_DRV)\perl - -# -# Comment this out if you DON'T want your perl installation to be versioned. -# This means that the new installation will overwrite any files from the -# old installation at the same INST_TOP location. Leaving it enabled is -# the safest route, as perl adds the extra version directory to all the -# locations it installs files to. If you disable it, an alternative -# versioned installation can be obtained by setting INST_TOP above to a -# path that includes an arbitrary version string. -# -#INST_VER = \5.7.1 - -# -# Comment this out if you DON'T want your perl installation to have -# architecture specific components. This means that architecture- -# specific files will be installed along with the architecture-neutral -# files. Leaving it enabled is safer and more flexible, in case you -# want to build multiple flavors of perl and install them together in -# the same location. Commenting it out gives you a simpler -# installation that is easier to understand for beginners. -# -#INST_ARCH = \$(ARCHNAME) - -# -# uncomment to enable multiple interpreters. This is need for fork() -# emulation. -# -USE_MULTI = define - -# -# Beginnings of interpreter cloning/threads; still very incomplete. -# This should be enabled to get the fork() emulation. This needs -# USE_MULTI as well. -# -USE_ITHREADS = define - -# -# uncomment to enable the implicit "host" layer for all system calls -# made by perl. This needs USE_MULTI above. This is also needed to -# get fork(). -# -USE_IMP_SYS = define - -# -# uncomment to enable the experimental PerlIO I/O subsystem. -USE_PERLIO = define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_ITHREADS instead). -# -# uncomment to enable threads-capabilities. This is incompatible with -# USE_ITHREADS, and is only here for people who may have come to rely -# on the experimental Thread support that was in 5.005. -# -#USE_5005THREADS = define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_MULTI instead). -# -# uncomment next line if you want to use the PERL_OBJECT build option. -# DO NOT ENABLE unless you have legacy code that relies on the C++ -# CPerlObj class that was available in 5.005. This cannot be enabled -# if you ask for USE_5005THREADS above. -# -#USE_OBJECT = define - -# -# uncomment one of the following lines if you are using either -# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) -# -#CCTYPE = MSVC20 -#CCTYPE = MSVC60 - -# -# uncomment next line if you want debug version of perl (big,slow) -# -#CFG = Debug - -# -# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. -# It has patches that fix known bugs in older versions of MSVCRT.DLL. -# This currently requires VC 5.0 with Service Pack 3 or later. -# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ -# and follow the directions in the package to install. -# -# Not recommended if you have VC 6.x and you're not running Windows 9x. -# -#USE_PERLCRT = define - -# -# uncomment to enable linking with setargv.obj under the Visual C -# compiler. Setting this options enables perl to expand wildcards in -# arguments, but it may be harder to use alternate methods like -# File::DosGlob that are more powerful. This option is supported only with -# Visual C. -# -#USE_SETARGV = define - -# -# if you have the source for des_fcrypt(), uncomment this and make sure the -# file exists (see README.win32). File should be located in the same -# directory as this file. -# -#CRYPT_SRC = fcrypt.c - -# -# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a -# library, uncomment this, and make sure the library exists (see README.win32) -# Specify the full pathname of the library. -# -#CRYPT_LIB = fcrypt.lib - -# -# set this if you wish to use perl's malloc -# WARNING: Turning this on/off WILL break binary compatibility with extensions -# you may have compiled with/without it. Be prepared to recompile all -# extensions if you change the default. Currently, this cannot be enabled -# if you ask for USE_IMP_SYS above. -# -#PERL_MALLOC = define - -# -# set the install locations of the compiler include/libraries -# Running VCVARS32.BAT is *required* when using Visual C. -# Some versions of Visual C don't define MSVCDIR in the environment, -# so you may have to set CCHOME explicitly (spaces in the path name should -# not be quoted) -# -#CCHOME = f:\msvc20 -CCHOME = $(MSVCDIR) -CCINCDIR = $(CCHOME)\include -CCLIBDIR = $(CCHOME)\lib - -# -# Additional compiler flags can be specified here. -# - -# -# This should normally be disabled. Adding -DPERL_POLLUTE enables support -# for old symbols by default, at the expense of extreme pollution. You most -# probably just want to build modules that won't compile with -# perl Makefile.PL POLLUTE=1 -# instead of enabling this. Please report such modules to the respective -# authors. -# -#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE - -# -# This should normally be disabled. Enabling it will disable the File::Glob -# implementation of CORE::glob. -# -#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB - -# -# This should normally be disabled. Enabling it causes perl to read scripts -# in text mode (which is the 5.005 behavior) and will break ByteLoader. -#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS - -# -# specify semicolon-separated list of extra directories that modules will -# look for libraries (spaces in path names need not be quoted) -# -EXTRALIBDIRS = - -# -# set this to your email address (perl will guess a value from -# from your loginname and your hostname, which may not be right) -# -#EMAIL = - -## -## Build configuration ends. -## - -##################### CHANGE THESE ONLY IF YOU MUST ##################### - -!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" -D_CRYPT = undef -!ELSE -D_CRYPT = define -CRYPT_FLAG = -DHAVE_DES_FCRYPT -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -PERL_MALLOC = undef -USE_5005THREADS = undef -USE_MULTI = undef -USE_IMP_SYS = define -!ENDIF - -!IF "$(PERL_MALLOC)" == "" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "" -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "define" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "define" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_MULTI)" == "" -USE_MULTI = undef -!ENDIF - -!IF "$(USE_OBJECT)" == "" -USE_OBJECT = undef -!ENDIF - -!IF "$(USE_ITHREADS)" == "" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "" -USE_IMP_SYS = undef -!ENDIF - -!IF "$(USE_PERLIO)" == "" -USE_PERLIO = undef -!ENDIF - -!IF "$(USE_PERLCRT)" == "" -USE_PERLCRT = undef -!ENDIF - -!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" -USE_MULTI = define -!ENDIF - -!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" -USE_MULTI = define -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT -!ENDIF - -!IF "$(USE_IMP_SYS)" != "undef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS -!ENDIF - -!IF "$(PROCESSOR_ARCHITECTURE)" == "" -PROCESSOR_ARCHITECTURE = x86 -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object -!ELSE -!IF "$(USE_5005THREADS)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread -!ELSE -!IF "$(USE_MULTI)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi -!ELSE -!IF "$(USE_PERLIO)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio -!ELSE -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -!ENDIF -!ENDIF -!ENDIF -!ENDIF - -!IF "$(USE_PERLIO)" == "define" -BUILDOPT = $(BUILDOPT) -DUSE_PERLIO -!ENDIF - -!IF "$(USE_ITHREADS)" == "define" -ARCHNAME = $(ARCHNAME)-thread -!ENDIF - -# Visual Studio 98 specific -!IF "$(CCTYPE)" == "MSVC60" - -# VC 6.0 can load the socket dll on demand. Makes the test suite -# run in about 10% less time. -DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib -!ENDIF - -ARCHDIR = ..\lib\$(ARCHNAME) -COREDIR = ..\lib\CORE -AUTODIR = ..\lib\auto -LIBDIR = ..\lib -EXTDIR = ..\ext -PODDIR = ..\pod -EXTUTILSDIR = $(LIBDIR)\ExtUtils - -# -INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin -INST_BIN = $(INST_SCRIPT)$(INST_ARCH) -INST_LIB = $(INST_TOP)$(INST_VER)\lib -INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) -INST_COREDIR = $(INST_ARCHLIB)\CORE -INST_POD = $(INST_LIB)\pod -INST_HTML = $(INST_TOP)$(INST_VER)\html - -# -# Programs to compile, build .lib files and link -# - -CC = cl -LINK32 = link -LIB32 = $(LINK32) -lib -RSC = rc - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX -DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -TP -GX - -!IF "$(USE_PERLCRT)" != "define" -LIBC = msvcrt.lib -!ELSE -LIBC = PerlCRT.lib -!ENDIF - -PERLEXE_RES = -PERLDLL_RES = - -!IF "$(CFG)" == "Debug" -! IF "$(CCTYPE)" == "MSVC20" -OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -! ELSE -OPTIMIZE = -Od -MD -Zi -DDEBUGGING -! ENDIF -LINK_DBG = -debug -pdb:none -!ELSE -# -O1 yields smaller code, which turns out to be faster than -O2 -#OPTIMIZE = -O2 -MD -DNDEBUG -OPTIMIZE = -O1 -MD -DNDEBUG -LINK_DBG = -release -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) -BUILDOPT = $(BUILDOPT) -DPERL_OBJECT -!ENDIF - -!IF "$(USE_PERLCRT)" != "define" -BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX -!ENDIF - -LIBBASEFILES = $(CRYPT_LIB) \ - oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib - -# we add LIBC here, since we may be using PerlCRT.dll -LIBFILES = $(LIBBASEFILES) $(LIBC) - -CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ - -libpath:"$(INST_COREDIR)" \ - -machine:$(PROCESSOR_ARCHITECTURE) -OBJOUT_FLAG = -Fo -EXEOUT_FLAG = -Fe - -CFLAGS_O = $(CFLAGS) $(BUILDOPT) - -#################### do not edit below this line ####################### -############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## - -o = .obj - -# -# Rules -# - -.SUFFIXES : .c $(o) .dll .lib .exe .rc .res - -.c$(o): - $(CC) -c -I$( ..\config.sh - -# this target is for when changes to the main config.sh happen -# edit config.{b,v,g}c and make this target once for each supported -# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`) -regen_config_h: - perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh - cd .. - -del /f perl.exe - perl configpm - cd win32 - -del /f $(CFGH_TMPL) - -mkdir $(COREDIR) - -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" - rename config.h $(CFGH_TMPL) - -$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl - cd .. - miniperl configpm - cd win32 - if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) - $(XCOPY) ..\*.h $(COREDIR)\*.* - $(XCOPY) *.h $(COREDIR)\*.* - $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* - $(RCOPY) include $(COREDIR)\*.* - -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" - if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) - -$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) -<< - -$(MINIDIR) : - if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" - -$(MINICORE_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c - -$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c - -# -DPERL_IMPLICIT_SYS needs C++ for perllib.c -# This is the only file that depends on perlhost.h, vmem.h, and vdir.h -!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" -perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h - $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c -!ENDIF - -# 1. we don't want to rebuild miniperl.exe when config.h changes -# 2. we don't want to rebuild miniperl.exe with non-default config.h -$(MINI_OBJ) : $(CORE_NOCFG_H) - -$(WIN32_OBJ) : $(CORE_H) -$(CORE_OBJ) : $(CORE_H) -$(DLL_OBJ) : $(CORE_H) -$(X2P_OBJ) : $(CORE_H) - -perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl - $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ - CCTYPE=$(CCTYPE) > perldll.def - -$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) - $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< - $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) -<< - $(XCOPY) $(PERLIMPLIB) $(COREDIR) - -$(MINIMOD) : $(MINIPERL) ..\minimod.pl - cd .. - miniperl minimod.pl > lib\ExtUtils\Miniperl.pm - cd win32 - -..\x2p\a2p$(o) : ..\x2p\a2p.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c - -..\x2p\hash$(o) : ..\x2p\hash.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c - -..\x2p\str$(o) : ..\x2p\str.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c - -..\x2p\util$(o) : ..\x2p\util.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c - -..\x2p\walk$(o) : ..\x2p\walk.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c - -$(X2P) : $(MINIPERL) $(X2P_OBJ) - $(MINIPERL) ..\x2p\find2perl.PL - $(MINIPERL) ..\x2p\s2p.PL - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) -<< - -perlmain.c : runperl.c - copy runperl.c perlmain.c - -perlmain$(o) : perlmain.c - $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c - -$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) - $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ - $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) - copy $(PERLEXE) $(WPERLEXE) - $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - -$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) - if not exist $(AUTODIR) mkdir $(AUTODIR) - cd $(EXTDIR)\$(*B) - ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL - ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL - cd ..\..\win32 - $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) - $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) - cd $(EXTDIR)\$(*B) - $(XSUBPP) dl_win32.xs > $(*B).c - cd ..\..\win32 - -$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs - copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs - -#---------------------------------------------------------------------------------- -Extensions: buildext.pl $(PERLDEP) $(CONFIGPM) - $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) - -Extensions_clean: - -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean - -#---------------------------------------------------------------------------------- - -doc: $(PERLEXE) - $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ - --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ - --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse - -utils: $(PERLEXE) $(X2P) - cd ..\utils - $(MAKE) PERL=$(MINIPERL) - cd ..\pod - copy ..\README.aix .\perlaix.pod - copy ..\README.amiga .\perlamiga.pod - copy ..\README.apollo .\perlapollo.pod - copy ..\README.beos .\perlbeos.pod - copy ..\README.bs2000 .\perlbs2000.pod - copy ..\README.cygwin .\perlcygwin.pod - copy ..\README.dgux .\perldgux.pod - copy ..\README.dos .\perldos.pod - copy ..\README.epoc .\perlepoc.pod - copy ..\README.hurd .\perlhurd.pod - copy ..\README.hpux .\perlhpux.pod - copy ..\README.machten .\perlmachten.pod - copy ..\README.macos .\perlmacos.pod - copy ..\README.mint .\perlmint.pod - copy ..\README.mpeix .\perlmpeix.pod - copy ..\README.netware .\perlnetware.pod - copy ..\README.os2 .\perlos2.pod - copy ..\README.os390 .\perlos390.pod - copy ..\README.plan9 .\perlplan9.pod - copy ..\README.qnx .\perlqnx.pod - copy ..\README.solaris .\perlsolaris.pod - copy ..\README.tru64 .\perltru64.pod - copy ..\README.vmesa .\perlvmesa.pod - copy ..\vms\perlvms.pod .\perlvms.pod - copy ..\README.vos .\perlvos.pod - copy ..\README.win32 .\perlwin32.pod - $(MAKE) -f ..\win32\pod.mak converters - cd ..\lib - $(PERLEXE) lib_pm.PL - cd ..\win32 - $(PERLEXE) $(PL2BAT) $(UTILS) - -distclean: clean - -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ - $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) - -del /f *.def *.map - -del /f $(EXTENSION_DLL) - -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm - -del /f $(EXTDIR)\DynaLoader\dl_win32.xs - -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm - -del /f $(LIBDIR)\XSLoader.pm - -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm - -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm - -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm - -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm - -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm - -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm - -del /f $(LIBDIR)\File\Glob.pm - -del /f $(LIBDIR)\Storable.pm - -del /f $(LIBDIR)\Filter\Util\Call.pm - -del /f $(LIBDIR)\Digest\MD5.pm - -del /f $(LIBDIR)\PerlIO\Scalar.pm - -del /f $(LIBDIR)\PerlIO\Via.pm - -del /f $(LIBDIR)\MIME\Base64.pm - -del /f $(LIBDIR)\MIME\QuotedPrint.pm - -del /f $(LIBDIR)\List\Util.pm - -del /f $(LIBDIR)\Scalar\Util.pm - -del /f $(LIBDIR)\Time\HiRes.pm - -del /f $(LIBDIR)\Time\Piece.pm - -del /f $(LIBDIR)\XS\Typemap.pm - -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO - -rmdir /s $(LIBDIR)\IO - -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread - -rmdir /s $(LIBDIR)\Thread - -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B - -rmdir /s $(LIBDIR)\B - -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data - -rmdir /s $(LIBDIR)\Data - -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util - -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest - -rmdir /s $(LIBDIR)\Digest - -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME - -rmdir /s $(LIBDIR)\MIME - -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List - -rmdir /s $(LIBDIR)\List - -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar - -rmdir /s $(LIBDIR)\Scalar - -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS - -rmdir /s $(LIBDIR)\XS - cd $(PODDIR) - -del /f *.html *.bat checkpods \ - perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \ - perlbs2000.pod perlcygwin.pod perldgux.pod \ - perldos.pod perlepoc.pod perlhurd.pod \ - perlhpux.pod perlmachten.pod \ - perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \ - perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \ - perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ - perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ - podchecker podselect - cd ..\utils - -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp - -del /f *.bat - cd ..\win32 - cd ..\x2p - -del /f find2perl s2p - -del /f *.bat - cd ..\win32 - -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new - -del /f $(CONFIGPM) - -del /f bin\*.bat - cd $(EXTDIR) - -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib - cd ..\win32 - -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) - -rmdir /s $(AUTODIR) - -if exist $(COREDIR) rmdir /s /q $(COREDIR) - -rmdir /s $(COREDIR) - -install : all installbare installhtml - -installbare : utils - $(PERLEXE) ..\installperl - if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* - $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* - $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* - -installhtml : doc - $(RCOPY) html\*.* $(INST_HTML)\*.* - -inst_lib : $(CONFIGPM) - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - $(RCOPY) ..\lib $(INST_LIB)\*.* - -minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils - $(XCOPY) $(MINIPERL) ..\t\perl.exe - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - attrib -r ..\t\*.* - copy test ..\t - cd ..\t - $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t - cd ..\win32 - -test-prep : all utils - $(XCOPY) $(PERLEXE) ..\t\$(NULL) - $(XCOPY) $(PERLDLL) ..\t\$(NULL) - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - -test : test-prep - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide : test-prep - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -clean : Extensions_clean - -@$(DEL) miniperlmain$(o) - -@$(DEL) $(MINIPERL) - -@$(DEL) perlglob$(o) - -@$(DEL) perlmain$(o) - -@$(DEL) config.w32 - -@$(DEL) config.h - -@$(DEL) $(GLOBEXE) - -@$(DEL) $(PERLEXE) - -@$(DEL) $(WPERLEXE) - -@$(DEL) $(PERLDLL) - -@$(DEL) $(CORE_OBJ) - -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) - -rmdir /s $(MINIDIR) - -@$(DEL) $(WIN32_OBJ) - -@$(DEL) $(DLL_OBJ) - -@$(DEL) $(X2P_OBJ) - -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res - -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat - -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat - -@$(DEL) *.ilk - -@$(DEL) *.pdb - -# Handy way to run perlbug -ok without having to install and run the -# installed perlbug. We don't re-run the tests here - we trust the user. -# Please *don't* use this unless all tests pass. -# If you want to report test failures, use "nmake nok" instead. -ok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" - -okfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok - -nok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" - -nokfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok +# +# Makefile to build perl on Windows NT using Microsoft NMAKE. +# Supported compilers: +# Visual C++ 5.x (possibly other versions) +# +# This is set up to build a perl.exe that runs off a shared library +# (perl57.dll). Also makes individual DLLs for the XS extensions. +# + +## +## Make sure you read README.win32 *before* you mess with anything here! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "nmake install" to put your +# newly built perl. +# +INST_DRV = c: +INST_TOP = $(INST_DRV)\perl + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +#INST_VER = \5.7.1 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +#INST_ARCH = \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +USE_MULTI = define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +USE_ITHREADS = define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +USE_IMP_SYS = define + +# +# uncomment to enable the experimental PerlIO I/O subsystem. +USE_PERLIO = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS above. +# +#USE_OBJECT = define + +# +# uncomment one of the following lines if you are using either +# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) +# +#CCTYPE = MSVC20 +#CCTYPE = MSVC60 + +# +# uncomment next line if you want debug version of perl (big,slow) +# +#CFG = Debug + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT = define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this options enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful. This option is supported only with +# Visual C. +# +#USE_SETARGV = define + +# +# if you have the source for des_fcrypt(), uncomment this and make sure the +# file exists (see README.win32). File should be located in the same +# directory as this file. +# +#CRYPT_SRC = fcrypt.c + +# +# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment this, and make sure the library exists (see README.win32) +# Specify the full pathname of the library. +# +#CRYPT_LIB = fcrypt.lib + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC = define + +# +# set the install locations of the compiler include/libraries +# Running VCVARS32.BAT is *required* when using Visual C. +# Some versions of Visual C don't define MSVCDIR in the environment, +# so you may have to set CCHOME explicitly (spaces in the path name should +# not be quoted) +# +#CCHOME = f:\msvc20 +CCHOME = $(MSVCDIR) +CCINCDIR = $(CCHOME)\include +CCLIBDIR = $(CCHOME)\lib + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS = + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL = + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +!ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +PERL_MALLOC = undef +USE_5005THREADS = undef +USE_MULTI = undef +USE_IMP_SYS = define +!ENDIF + +!IF "$(PERL_MALLOC)" == "" +PERL_MALLOC = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "" +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC = undef +!ENDIF + +!IF "$(USE_MULTI)" == "" +USE_MULTI = undef +!ENDIF + +!IF "$(USE_OBJECT)" == "" +USE_OBJECT = undef +!ENDIF + +!IF "$(USE_ITHREADS)" == "" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "" +USE_IMP_SYS = undef +!ENDIF + +!IF "$(USE_PERLIO)" == "" +USE_PERLIO = undef +!ENDIF + +!IF "$(USE_PERLCRT)" == "" +USE_PERLCRT = undef +!ENDIF + +!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI = define +!ENDIF + +!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI = define +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT +!ENDIF + +!IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS +!ENDIF + +!IF "$(PROCESSOR_ARCHITECTURE)" == "" +PROCESSOR_ARCHITECTURE = x86 +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +!ELSE +!IF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +!ELSE +!IF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +!ELSE +!IF "$(USE_PERLIO)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio +!ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +!ENDIF +!ENDIF +!ENDIF +!ENDIF + +!IF "$(USE_PERLIO)" == "define" +BUILDOPT = $(BUILDOPT) -DUSE_PERLIO +!ENDIF + +!IF "$(USE_ITHREADS)" == "define" +ARCHNAME = $(ARCHNAME)-thread +!ENDIF + +# Visual Studio 98 specific +!IF "$(CCTYPE)" == "MSVC60" + +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib +!ENDIF + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_TOP)$(INST_VER)\html + +# +# Programs to compile, build .lib files and link +# + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +!IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +!ELSE +LIBC = PerlCRT.lib +!ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +!IF "$(CFG)" == "Debug" +! IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -Od -MD -Z7 -DDEBUGGING +! ELSE +OPTIMIZE = -Od -MD -Zi -DDEBUGGING +! ENDIF +LINK_DBG = -debug -pdb:none +!ELSE +# -O1 yields smaller code, which turns out to be faster than -O2 +#OPTIMIZE = -O2 -MD -DNDEBUG +OPTIMIZE = -O1 -MD -DNDEBUG +LINK_DBG = -release +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) +BUILDOPT = $(BUILDOPT) -DPERL_OBJECT +!ENDIF + +!IF "$(USE_PERLCRT)" != "define" +BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX +!ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o = .obj + +# +# Rules +# + +.SUFFIXES : .c $(o) .dll .lib .exe .rc .res + +.c$(o): + $(CC) -c -I$( ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh + cd .. + -del /f perl.exe + perl configpm + cd win32 + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. + miniperl configpm + cd win32 + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" + if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) +<< + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h +!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +!ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ + CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) + $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< + $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) +<< + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. + miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + cd win32 + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) +<< + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) + ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + cd ..\..\win32 + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) + $(XSUBPP) dl_win32.xs > $(*B).c + cd ..\..\win32 + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +#---------------------------------------------------------------------------------- +Extensions: buildext.pl $(PERLDEP) $(CONFIGPM) + $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) + +Extensions_clean: + -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean + +#---------------------------------------------------------------------------------- + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils + $(MAKE) PERL=$(MINIPERL) + cd ..\pod + copy ..\README.aix .\perlaix.pod + copy ..\README.amiga .\perlamiga.pod + copy ..\README.apollo .\perlapollo.pod + copy ..\README.beos .\perlbeos.pod + copy ..\README.bs2000 .\perlbs2000.pod + copy ..\README.cygwin .\perlcygwin.pod + copy ..\README.dgux .\perldgux.pod + copy ..\README.dos .\perldos.pod + copy ..\README.epoc .\perlepoc.pod + copy ..\README.hurd .\perlhurd.pod + copy ..\README.hpux .\perlhpux.pod + copy ..\README.machten .\perlmachten.pod + copy ..\README.macos .\perlmacos.pod + copy ..\README.mint .\perlmint.pod + copy ..\README.mpeix .\perlmpeix.pod + copy ..\README.netware .\perlnetware.pod + copy ..\README.os2 .\perlos2.pod + copy ..\README.os390 .\perlos390.pod + copy ..\README.plan9 .\perlplan9.pod + copy ..\README.qnx .\perlqnx.pod + copy ..\README.solaris .\perlsolaris.pod + copy ..\README.tru64 .\perltru64.pod + copy ..\README.uts .\perluts.pod + copy ..\README.vmesa .\perlvmesa.pod + copy ..\vms\perlvms.pod .\perlvms.pod + copy ..\README.vos .\perlvos.pod + copy ..\README.win32 .\perlwin32.pod + $(MAKE) -f ..\win32\pod.mak converters + cd ..\lib + $(PERLEXE) lib_pm.PL + cd ..\win32 + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTENSION_DLL) + -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -del /f $(LIBDIR)\Storable.pm + -del /f $(LIBDIR)\Filter\Util\Call.pm + -del /f $(LIBDIR)\Digest\MD5.pm + -del /f $(LIBDIR)\PerlIO\Scalar.pm + -del /f $(LIBDIR)\PerlIO\Via.pm + -del /f $(LIBDIR)\MIME\Base64.pm + -del /f $(LIBDIR)\MIME\QuotedPrint.pm + -del /f $(LIBDIR)\List\Util.pm + -del /f $(LIBDIR)\Scalar\Util.pm + -del /f $(LIBDIR)\Time\HiRes.pm + -del /f $(LIBDIR)\Time\Piece.pm + -del /f $(LIBDIR)\XS\Typemap.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO + -rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread + -rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B + -rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data + -rmdir /s $(LIBDIR)\Data + -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util + -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest + -rmdir /s $(LIBDIR)\Digest + -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME + -rmdir /s $(LIBDIR)\MIME + -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List + -rmdir /s $(LIBDIR)\List + -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar + -rmdir /s $(LIBDIR)\Scalar + -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS + -rmdir /s $(LIBDIR)\XS + cd $(PODDIR) + -del /f *.html *.bat checkpods \ + perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \ + perlbs2000.pod perlcygwin.pod perldgux.pod \ + perldos.pod perlepoc.pod perlhurd.pod \ + perlhpux.pod perlmachten.pod \ + perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \ + perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \ + perlsolaris.pod perltru64.pod perluts.pod \ + perlvmesa.pod perlvms.pod perlvos.pod \ + perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ + podchecker podselect + cd ..\utils + -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp + -del /f *.bat + cd ..\win32 + cd ..\x2p + -del /f find2perl s2p + -del /f *.bat + cd ..\win32 + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + cd $(EXTDIR) + -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib + cd ..\win32 + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) + -rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) + -rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + attrib -r ..\t\*.* + copy test ..\t + cd ..\t + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + cd ..\win32 + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + +test : test-prep + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +clean : Extensions_clean + -@$(DEL) miniperlmain$(o) + -@$(DEL) $(MINIPERL) + -@$(DEL) perlglob$(o) + -@$(DEL) perlmain$(o) + -@$(DEL) config.w32 + -@$(DEL) config.h + -@$(DEL) $(GLOBEXE) + -@$(DEL) $(PERLEXE) + -@$(DEL) $(WPERLEXE) + -@$(DEL) $(PERLDLL) + -@$(DEL) $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) + -rmdir /s $(MINIDIR) + -@$(DEL) $(WIN32_OBJ) + -@$(DEL) $(DLL_OBJ) + -@$(DEL) $(X2P_OBJ) + -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res + -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat + -@$(DEL) *.ilk + -@$(DEL) *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "nmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok diff --git a/win32/makefile.mk b/win32/makefile.mk index 142bc2e..d523b7b 100644 --- a/win32/makefile.mk +++ b/win32/makefile.mk @@ -1,1266 +1,1268 @@ -# -# Makefile to build perl on Windows NT using DMAKE. -# Supported compilers: -# Visual C++ 2.0 thro 6.0 -# Borland C++ 5.02 -# Mingw32 with gcc-2.95.2 or better **experimental** -# -# This is set up to build a perl.exe that runs off a shared library -# (perl57.dll). Also makes individual DLLs for the XS extensions. -# - -## -## Make sure you read README.win32 *before* you mess with anything here! -## - -## -## Build configuration. Edit the values below to suit your needs. -## - -# -# Set these to wherever you want "dmake install" to put your -# newly built perl. -# -INST_DRV *= c: -INST_TOP *= $(INST_DRV)\perl - -# -# Comment this out if you DON'T want your perl installation to be versioned. -# This means that the new installation will overwrite any files from the -# old installation at the same INST_TOP location. Leaving it enabled is -# the safest route, as perl adds the extra version directory to all the -# locations it installs files to. If you disable it, an alternative -# versioned installation can be obtained by setting INST_TOP above to a -# path that includes an arbitrary version string. -# -INST_VER *= \5.7.1 - -# -# Comment this out if you DON'T want your perl installation to have -# architecture specific components. This means that architecture- -# specific files will be installed along with the architecture-neutral -# files. Leaving it enabled is safer and more flexible, in case you -# want to build multiple flavors of perl and install them together in -# the same location. Commenting it out gives you a simpler -# installation that is easier to understand for beginners. -# -INST_ARCH *= \$(ARCHNAME) - -# -# uncomment to enable multiple interpreters. This is need for fork() -# emulation. -# -USE_MULTI *= define - -# -# Beginnings of interpreter cloning/threads; still very incomplete. -# This should be enabled to get the fork() emulation. This needs -# USE_MULTI as well. -# -USE_ITHREADS *= define - -# -# uncomment to enable the implicit "host" layer for all system calls -# made by perl. This needs USE_MULTI above. This is also needed to -# get fork(). -# -USE_IMP_SYS *= define - -# -# uncomment to enable the experimental PerlIO I/O subsystem. -USE_PERLIO = define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_ITHREADS instead). -# -# uncomment to enable threads-capabilities. This is incompatible with -# USE_ITHREADS, and is only here for people who may have come to rely -# on the experimental Thread support that was in 5.005. -# -#USE_5005THREADS *= define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_MULTI instead). -# -# uncomment next line if you want to use the PERL_OBJECT build option. -# DO NOT ENABLE unless you have legacy code that relies on the C++ -# CPerlObj class that was available in 5.005. This cannot be enabled -# if you ask for USE_5005THREADS above. -# -#USE_OBJECT *= define - -# -# uncomment exactly one of the following -# -# Visual C++ 2.x -#CCTYPE *= MSVC20 -# Visual C++ > 2.x and < 6.x -#CCTYPE *= MSVC -# Visual C++ >= 6.x -CCTYPE *= MSVC60 -# Borland 5.02 or later -#CCTYPE *= BORLAND -# mingw32+gcc-2.95.2 or better -#CCTYPE *= GCC - -# -# uncomment this if your Borland compiler is older than v5.4. -BCCOLD = define -# -# uncomment this if you want to use Borland's VCL as your CRT -#BCCVCL = define - -# -# uncomment this if you are compiling under Windows 95/98 and command.com -# (not needed if you're running under 4DOS/NT 6.01 or later) -#IS_WIN95 *= define - -# -# uncomment next line if you want debug version of perl (big,slow) -# If not enabled, we automatically try to use maximum optimization -# with all compilers that are known to have a working optimizer. -# -CFG *= Debug - -# -# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. -# It has patches that fix known bugs in older versions of MSVCRT.DLL. -# This currently requires VC 5.0 with Service Pack 3 or later. -# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ -# and follow the directions in the package to install. -# -# Not recommended if you have VC 6.x and you're not running Windows 9x. -# -#USE_PERLCRT *= define - -# -# uncomment to enable linking with setargv.obj under the Visual C -# compiler. Setting this options enables perl to expand wildcards in -# arguments, but it may be harder to use alternate methods like -# File::DosGlob that are more powerful. This option is supported only with -# Visual C. -# -#USE_SETARGV *= define - -# -# if you have the source for des_fcrypt(), uncomment this and make sure the -# file exists (see README.win32). File should be located in the same -# directory as this file. -# -#CRYPT_SRC *= fcrypt.c - -# -# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a -# library, uncomment this, and make sure the library exists (see README.win32) -# Specify the full pathname of the library. -# -#CRYPT_LIB *= fcrypt.lib - -# -# set this if you wish to use perl's malloc -# WARNING: Turning this on/off WILL break binary compatibility with extensions -# you may have compiled with/without it. Be prepared to recompile all -# extensions if you change the default. Currently, this cannot be enabled -# if you ask for USE_IMP_SYS above. -# -#PERL_MALLOC *= define - -# -# set the install locations of the compiler include/libraries -# Running VCVARS32.BAT is *required* when using Visual C. -# Some versions of Visual C don't define MSVCDIR in the environment, -# so you may have to set CCHOME explicitly (spaces in the path name should -# not be quoted) -# -#CCHOME *= F:\borland\bc5 -CCHOME *= $(MSVCDIR) -#CCHOME *= c:\gcc-2.95.2 -CCINCDIR *= $(CCHOME)\include -CCLIBDIR *= $(CCHOME)\lib - -# -# Additional compiler flags can be specified here. -# - -# -# This should normally be disabled. Adding -DPERL_POLLUTE enables support -# for old symbols by default, at the expense of extreme pollution. You most -# probably just want to build modules that won't compile with -# perl Makefile.PL POLLUTE=1 -# instead of enabling this. Please report such modules to the respective -# authors. -# -#BUILDOPT += -DPERL_POLLUTE - -# -# This should normally be disabled. Enabling it will disable the File::Glob -# implementation of CORE::glob. -# -#BUILDOPT += -DPERL_EXTERNAL_GLOB - -# -# This should normally be disabled. Enabling it causes perl to read scripts -# in text mode (which is the 5.005 behavior) and will break ByteLoader. -#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS - -# -# specify semicolon-separated list of extra directories that modules will -# look for libraries (spaces in path names need not be quoted) -# -EXTRALIBDIRS *= - -# -# set this to point to cmd.exe (only needed if you use some -# alternate shell that doesn't grok cmd.exe style commands) -# -#SHELL *= g:\winnt\system32\cmd.exe - -# -# set this to your email address (perl will guess a value from -# from your loginname and your hostname, which may not be right) -# -#EMAIL *= - -## -## Build configuration ends. -## - -##################### CHANGE THESE ONLY IF YOU MUST ##################### - -.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" -D_CRYPT = undef -.ELSE -D_CRYPT = define -CRYPT_FLAG = -DHAVE_DES_FCRYPT -.ENDIF - -.IF "$(USE_OBJECT)" == "define" -PERL_MALLOC != undef -USE_5005THREADS != undef -USE_MULTI != undef -USE_IMP_SYS != define -.ENDIF - -PERL_MALLOC *= undef - -USE_5005THREADS *= undef - -.IF "$(USE_5005THREADS)" == "define" -USE_ITHREADS != undef -.ENDIF - -.IF "$(USE_IMP_SYS)" == "define" -PERL_MALLOC != undef -.ENDIF - -USE_MULTI *= undef -USE_OBJECT *= undef -USE_ITHREADS *= undef -USE_IMP_SYS *= undef -USE_PERLIO *= undef -USE_PERLCRT *= undef - -.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" -USE_MULTI != define -.ENDIF - -.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" -USE_MULTI != define -USE_5005THREADS != undef -.ENDIF - -.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" -BUILDOPT += -DPERL_IMPLICIT_CONTEXT -.ENDIF - -.IF "$(USE_IMP_SYS)" != "undef" -BUILDOPT += -DPERL_IMPLICIT_SYS -.ENDIF - -.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE - -PROCESSOR_ARCHITECTURE *= x86 - -.IF "$(USE_OBJECT)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object -.ELIF "$(USE_5005THREADS)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread -.ELIF "$(USE_MULTI)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi -.ELSE -.IF "$(USE_PERLIO)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio -.ELSE -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -.ENDIF -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -.ENDIF - -.IF "$(USE_ITHREADS)" == "define" -ARCHNAME !:= $(ARCHNAME)-thread -.ENDIF - -# Visual Studio 98 specific -.IF "$(CCTYPE)" == "MSVC60" - -# VC 6.0 can load the socket dll on demand. Makes the test suite -# run in about 10% less time. -DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib - -.IF "$(CFG)" == "Debug" -.ELSE -# VC 6.0 seems capable of compiling perl correctly with optimizations -# enabled. Anything earlier fails tests. -CFG *= Optimize -.ENDIF -.ENDIF - -ARCHDIR = ..\lib\$(ARCHNAME) -COREDIR = ..\lib\CORE -AUTODIR = ..\lib\auto -LIBDIR = ..\lib -EXTDIR = ..\ext -PODDIR = ..\pod -EXTUTILSDIR = $(LIBDIR)\ExtUtils - -# -INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin -INST_BIN = $(INST_SCRIPT)$(INST_ARCH) -INST_LIB = $(INST_TOP)$(INST_VER)\lib -INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) -INST_COREDIR = $(INST_ARCHLIB)\CORE -INST_POD = $(INST_LIB)\pod -INST_HTML = $(INST_TOP)$(INST_VER)\html - -# -# Programs to compile, build .lib files and link -# - -.USESHELL : - -.IF "$(CCTYPE)" == "BORLAND" - -CC = bcc32 -.IF "$(BCCOLD)" != "define" -LINK32 = ilink32 -.ELSE -LINK32 = tlink32 -.ENDIF -LIB32 = tlib /P128 -IMPLIB = implib -c -RSC = rc - -# -# Options -# -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" -#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch -DEFINES = -DWIN32 $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -P - -LIBC = cw32mti.lib -LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) - -.IF "$(CFG)" == "Debug" -OPTIMIZE = -v -D_RTLDLL -DDEBUGGING -LINK_DBG = -v -.ELSE -OPTIMIZE = -O2 -D_RTLDLL -LINK_DBG = -.ENDIF - -CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" -OBJOUT_FLAG = -o -EXEOUT_FLAG = -e -LIBOUT_FLAG = -.IF "$(BCCOLD)" != "define" -LINK_FLAGS += -Gn -DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410 -.END -.IF "$(BCCVCL)" == "define" -LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib -LINK_FLAGS += -L"$(CCLIBDIR)\Release" -.END - - -.ELIF "$(CCTYPE)" == "GCC" - -CC = gcc -LINK32 = gcc -LIB32 = ar rc -IMPLIB = dlltool -RSC = rc - -i = .i -o = .o -a = .a - -# -# Options -# - -INCLUDES = -I.\include -I. -I.. -I$(COREDIR) -DEFINES = -DWIN32 $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -xc++ - -LIBC = -lmsvcrt - -# same libs as MSVC -LIBFILES = $(CRYPT_LIB) $(LIBC) \ - -lmoldname -lkernel32 -luser32 -lgdi32 \ - -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ - -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \ - -lwinmm -lversion -lodbc32 - -.IF "$(CFG)" == "Debug" -OPTIMIZE = -g -O2 -DDEBUGGING -LINK_DBG = -g -.ELSE -OPTIMIZE = -g -O2 -LINK_DBG = -g -.ENDIF - -CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) -LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" -OBJOUT_FLAG = -o -EXEOUT_FLAG = -o -LIBOUT_FLAG = - -# NOTE: we assume that GCC uses MSVCRT.DLL -BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX - -.ELSE - -CC = cl -LINK32 = link -LIB32 = $(LINK32) -lib -RSC = rc - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX -DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -TP -GX - -.IF "$(USE_PERLCRT)" != "define" -LIBC = msvcrt.lib -.ELSE -LIBC = PerlCRT.lib -.ENDIF - -PERLEXE_RES = -PERLDLL_RES = - -.IF "$(CFG)" == "Debug" -.IF "$(CCTYPE)" == "MSVC20" -OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -LINK_DBG = -debug -pdb:none -.ELSE -# -Zi requires .pdb file(s) -#OPTIMIZE = -Od -MD -Zi -DDEBUGGING -#LINK_DBG = -debug -OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING -LINK_DBG = -debug -debugtype:both -pdb:none -.ENDIF -.ELSE -.IF "$(CFG)" == "Optimize" -# -O1 yields smaller code, which turns out to be faster than -O2 -#OPTIMIZE = -O2 -MD -DNDEBUG -OPTIMIZE = -O1 -MD -DNDEBUG -.ELSE -OPTIMIZE = -Od -MD -DNDEBUG -.ENDIF -LINK_DBG = -release -.ENDIF - -LIBBASEFILES = $(CRYPT_LIB) \ - oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib - -# we add LIBC here, since we may be using PerlCRT.dll -LIBFILES = $(LIBBASEFILES) $(LIBC) - -CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ - -libpath:"$(INST_COREDIR)" \ - -machine:$(PROCESSOR_ARCHITECTURE) -OBJOUT_FLAG = -Fo -EXEOUT_FLAG = -Fe -LIBOUT_FLAG = /out: - -.IF "$(USE_PERLCRT)" != "define" -BUILDOPT += -DPERL_MSVCRT_READFIX -.ENDIF - -.ENDIF - -.IF "$(USE_OBJECT)" == "define" -OPTIMIZE += $(CXX_FLAG) -BUILDOPT += -DPERL_OBJECT -.ENDIF - -CFLAGS_O = $(CFLAGS) $(BUILDOPT) - -# used to allow local linking flags that are not propogated into Config.pm, -# currently unused -# -- BKS, 12-12-1999 -PRIV_LINK_FLAGS *= -BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) - -#################### do not edit below this line ####################### -############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## - -o *= .obj -a *= .lib - -LKPRE = INPUT ( -LKPOST = ) - -# -# Rules -# - -.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res - -.c$(o): - $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< - -.c.i: - $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@ - -.y.c: - $(NOOP) - -$(o).dll: -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def - $(IMPLIB) $(*B).lib $@ -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) - $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ -.ELSE - $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ - -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) -.ENDIF - -.rc.res: - $(RSC) -i.. $< - -# -# various targets -MINIPERL = ..\miniperl.exe -MINIDIR = .\mini -PERLEXE = ..\perl.exe -WPERLEXE = ..\wperl.exe -GLOBEXE = ..\perlglob.exe -CONFIGPM = ..\lib\Config.pm -MINIMOD = ..\lib\ExtUtils\Miniperl.pm -X2P = ..\x2p\a2p.exe - -# Nominate a target which causes extensions to be re-built -# This used to be $(PERLEXE), but at worst it is the .dll that they depend -# on and really only the interface - i.e. the .def file used to export symbols -# from the .dll -PERLDEP = perldll.def - - -PL2BAT = bin\pl2bat.pl -GLOBBAT = bin\perlglob.bat - -UTILS = \ - ..\utils\h2ph \ - ..\utils\splain \ - ..\utils\dprofpp \ - ..\utils\perlbug \ - ..\utils\pl2pm \ - ..\utils\c2ph \ - ..\utils\h2xs \ - ..\utils\perldoc \ - ..\utils\perlcc \ - ..\pod\checkpods \ - ..\pod\pod2html \ - ..\pod\pod2latex \ - ..\pod\pod2man \ - ..\pod\pod2text \ - ..\pod\pod2usage \ - ..\pod\podchecker \ - ..\pod\podselect \ - ..\x2p\find2perl \ - ..\x2p\s2p \ - bin\exetype.pl \ - bin\runperl.pl \ - bin\pl2bat.pl \ - bin\perlglob.pl \ - bin\search.pl - -.IF "$(CCTYPE)" == "BORLAND" - -CFGSH_TMPL = config.bc -CFGH_TMPL = config_H.bc - -.ELIF "$(CCTYPE)" == "GCC" - -CFGSH_TMPL = config.gc -CFGH_TMPL = config_H.gc -PERLIMPLIB = ..\libperl57$(a) - -.ELSE - -CFGSH_TMPL = config.vc -CFGH_TMPL = config_H.vc - -.ENDIF - -# makedef.pl must be updated if this changes, and this should normally -# only change when there is an incompatible revision of the public API. -# XXX so why did we change it from perl56 to perl57? -PERLIMPLIB *= ..\perl57$(a) -PERLDLL = ..\perl57.dll - -XCOPY = xcopy /f /r /i /d -RCOPY = xcopy /f /r /i /e /d -NOOP = @echo - -# -# filenames given to xsubpp must have forward slashes (since it puts -# full pathnames in #line strings) -XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ - -C++ -prototypes - -MICROCORE_SRC = \ - ..\av.c \ - ..\deb.c \ - ..\doio.c \ - ..\doop.c \ - ..\dump.c \ - ..\globals.c \ - ..\gv.c \ - ..\hv.c \ - ..\locale.c \ - ..\mg.c \ - ..\numeric.c \ - ..\op.c \ - ..\perl.c \ - ..\perlapi.c \ - ..\perly.c \ - ..\pp.c \ - ..\pp_ctl.c \ - ..\pp_hot.c \ - ..\pp_pack.c \ - ..\pp_sys.c \ - ..\regcomp.c \ - ..\regexec.c \ - ..\run.c \ - ..\scope.c \ - ..\sv.c \ - ..\taint.c \ - ..\toke.c \ - ..\universal.c \ - ..\utf8.c \ - ..\util.c \ - ..\xsutils.c - -EXTRACORE_SRC += perllib.c - -.IF "$(PERL_MALLOC)" == "define" -EXTRACORE_SRC += ..\malloc.c -.ENDIF - -.IF "$(USE_OBJECT)" != "define" -EXTRACORE_SRC += ..\perlio.c -.ENDIF - -WIN32_SRC = \ - .\win32.c \ - .\win32io.c \ - .\win32sck.c \ - .\win32thread.c - -.IF "$(CRYPT_SRC)" != "" -WIN32_SRC += .\$(CRYPT_SRC) -.ENDIF - -DLL_SRC = $(DYNALOADER).c - -X2P_SRC = \ - ..\x2p\a2p.c \ - ..\x2p\hash.c \ - ..\x2p\str.c \ - ..\x2p\util.c \ - ..\x2p\walk.c - -CORE_NOCFG_H = \ - ..\av.h \ - ..\cop.h \ - ..\cv.h \ - ..\dosish.h \ - ..\embed.h \ - ..\form.h \ - ..\gv.h \ - ..\handy.h \ - ..\hv.h \ - ..\iperlsys.h \ - ..\mg.h \ - ..\nostdio.h \ - ..\op.h \ - ..\opcode.h \ - ..\perl.h \ - ..\perlapi.h \ - ..\perlsdio.h \ - ..\perlsfio.h \ - ..\perly.h \ - ..\pp.h \ - ..\proto.h \ - ..\regexp.h \ - ..\scope.h \ - ..\sv.h \ - ..\thread.h \ - ..\unixish.h \ - ..\utf8.h \ - ..\util.h \ - ..\warnings.h \ - ..\XSUB.h \ - ..\EXTERN.h \ - ..\perlvars.h \ - ..\intrpvar.h \ - ..\thrdvar.h \ - .\include\dirent.h \ - .\include\netdb.h \ - .\include\sys\socket.h \ - .\win32.h - -CORE_H = $(CORE_NOCFG_H) .\config.h - -MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) -CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) -WIN32_OBJ = $(WIN32_SRC:db:+$(o)) -MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} -MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} -MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) -DLL_OBJ = $(DLL_SRC:db:+$(o)) -X2P_OBJ = $(X2P_SRC:db:+$(o)) - -PERLDLL_OBJ = $(CORE_OBJ) -PERLEXE_OBJ = perlmain$(o) - -PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) - -.IF "$(USE_SETARGV)" != "" -SETARGV_OBJ = setargv$(o) -.ENDIF - -DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ - Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ - Sys/Hostname Storable Filter/Util/Call Encode \ - Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece -STATIC_EXT = DynaLoader -NONXS_EXT = Errno - -DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader - -POD2HTML = $(PODDIR)\pod2html -POD2MAN = $(PODDIR)\pod2man -POD2LATEX = $(PODDIR)\pod2latex -POD2TEXT = $(PODDIR)\pod2text - -# vars must be separated by "\t+~\t+", since we're using the tempfile -# version of config_sh.pl (we were overflowing someone's buffer by -# trying to fit them all on the command line) -# -- BKS 10-17-1999 -CFG_VARS = \ - INST_DRV=$(INST_DRV) ~ \ - INST_TOP=$(INST_TOP:s/\/\\/) ~ \ - INST_VER=$(INST_VER:s/\/\\/) ~ \ - INST_ARCH=$(INST_ARCH) ~ \ - archname=$(ARCHNAME) ~ \ - cc=$(CC) ~ \ - ld=$(LINK32) ~ \ - ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ - cf_email=$(EMAIL) ~ \ - d_crypt=$(D_CRYPT) ~ \ - d_mymalloc=$(PERL_MALLOC) ~ \ - libs=$(LIBFILES:f) ~ \ - incpath=$(CCINCDIR:s/\/\\/) ~ \ - libperl=$(PERLIMPLIB:f) ~ \ - libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \ - libc=$(LIBC) ~ \ - make=dmake ~ \ - _o=$(o) obj_ext=$(o) ~ \ - _a=$(a) lib_ext=$(a) ~ \ - static_ext=$(STATIC_EXT) ~ \ - use5005threads=$(USE_5005THREADS) ~ \ - useithreads=$(USE_ITHREADS) ~ \ - usethreads=$(USE_5005THREADS) ~ \ - usemultiplicity=$(USE_MULTI) ~ \ - useperlio=$(USE_PERLIO) ~ \ - LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \ - optimize=$(OPTIMIZE) - -# -# set up targets varying between Win95 and WinNT builds -# - -.IF "$(IS_WIN95)" == "define" -MK2 = .\makefile.95 -RIGHTMAKE = __switch_makefiles -NOOP = @rem -.ELSE -MK2 = __not_needed -RIGHTMAKE = -.ENDIF - -# -# Top targets -# - -all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \ - $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ - $(X2P) Extensions - -$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c - -#---------------------------------------------------------------- - -#-------------------- BEGIN Win95 SPECIFIC ---------------------- - -# this target is a jump-off point for Win95 -# 1. it switches to the Win95-specific makefile if it exists -# (__do_switch_makefiles) -# 2. it prints a message when the Win95-specific one finishes (__done) -# 3. it then kills this makefile by trying to make __no_such_target - -__switch_makefiles: __do_switch_makefiles __done __no_such_target - -__do_switch_makefiles: -.IF "$(NOTFIRST)" != "true" - if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true -.ELSE - $(NOOP) -.ENDIF - -.IF "$(NOTFIRST)" != "true" -__done: - @echo Build process complete. Ignore any errors after this message. - @echo Run "dmake test" to test and "dmake install" to install - -.ELSE -# dummy targets for Win95-specific makefile - -__done: - $(NOOP) - -__no_such_target: - $(NOOP) - -.ENDIF - -# This target is used to generate the new makefile (.\makefile.95) for Win95 - -.\makefile.95: .\makefile.mk - $(MINIPERL) genmk95.pl makefile.mk $(MK2) - -#--------------------- END Win95 SPECIFIC --------------------- - -# a blank target for when builds don't need to do certain things -# this target added for Win95 port but used to keep the WinNT port able to -# use this file -__not_needed: - $(NOOP) - -$(GLOBEXE) : perlglob$(o) -.IF "$(CCTYPE)" == "BORLAND" - $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c - $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ - "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) -.ELSE - $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ - perlglob$(o) setargv$(o) -.ENDIF - -perlglob$(o) : perlglob.c - -config.w32 : $(CFGSH_TMPL) - copy $(CFGSH_TMPL) config.w32 - -.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) - -del /f config.h - copy $(CFGH_TMPL) config.h - -..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm - $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ - $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh - -# this target is for when changes to the main config.sh happen -# edit config.{b,v,g}c and make this target once for each supported -# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) -regen_config_h: - perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ - $(CFGSH_TMPL) > ..\config.sh - -cd .. && del /f perl.exe - cd .. && perl configpm - -del /f $(CFGH_TMPL) - -mkdir $(COREDIR) - -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" - rename config.h $(CFGH_TMPL) - -$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl - cd .. && miniperl configpm - if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) - $(XCOPY) ..\*.h $(COREDIR)\*.* - $(XCOPY) *.h $(COREDIR)\*.* - $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* - $(RCOPY) include $(COREDIR)\*.* - $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ - || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) - -$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) -.ELSE - $(LINK32) -subsystem:console -out:$@ \ - @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\)) -.ENDIF - -$(MINIDIR) : - if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" - -$(MINICORE_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c - -$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c - -# -DPERL_IMPLICIT_SYS needs C++ for perllib.c -# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless -# unless the .IF is true), so instead we use a .ELSE with the default. -# This is the only file that depends on perlhost.h, vmem.h, and vdir.h - -perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h -.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" - $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c -.ELSE - $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c -.ENDIF - -# 1. we don't want to rebuild miniperl.exe when config.h changes -# 2. we don't want to rebuild miniperl.exe with non-default config.h -$(MINI_OBJ) : $(CORE_NOCFG_H) - -$(WIN32_OBJ) : $(CORE_H) -$(CORE_OBJ) : $(CORE_H) -$(DLL_OBJ) : $(CORE_H) -$(X2P_OBJ) : $(CORE_H) - -perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl - $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ - $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def - -$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ - @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \ - $@,\n \ - $(LIBFILES)\n \ - perldll.def\n) - $(IMPLIB) $*.lib $@ -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) - dlltool --output-lib $(PERLIMPLIB) \ - --dllname $(PERLDLL:b).dll \ - --def perldll.def \ - --base-file perl.base \ - --output-exp perl.exp - $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \ - perl.exp $(LKPOST)) -.ELSE - $(LINK32) -dll -def:perldll.def -out:$@ \ - @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \ - $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)) -.ENDIF - $(XCOPY) $(PERLIMPLIB) $(COREDIR) - -$(MINIMOD) : $(MINIPERL) ..\minimod.pl - cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm - -..\x2p\a2p$(o) : ..\x2p\a2p.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c - -..\x2p\hash$(o) : ..\x2p\hash.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c - -..\x2p\str$(o) : ..\x2p\str.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c - -..\x2p\util$(o) : ..\x2p\util.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c - -..\x2p\walk$(o) : ..\x2p\walk.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c - -$(X2P) : $(MINIPERL) $(X2P_OBJ) - $(MINIPERL) ..\x2p\find2perl.PL - $(MINIPERL) ..\x2p\s2p.PL -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -v -o $@ $(BLINK_FLAGS) \ - $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) -.ELSE - $(LINK32) -subsystem:console -out:$@ \ - @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)) -.ENDIF - -perlmain.c : runperl.c - copy runperl.c perlmain.c - -perlmain$(o) : perlmain.c - $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c - -$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) -.IF "$(CCTYPE)" == "BORLAND" - $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ - @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \ - $(@:s,\,\\),\n \ - $(PERLIMPLIB) $(LIBFILES)\n) -.ELIF "$(CCTYPE)" == "GCC" - $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ - $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES) -.ELSE - $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \ - $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) -.ENDIF - copy $(PERLEXE) $(WPERLEXE) - $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - -$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) - if not exist $(AUTODIR) mkdir $(AUTODIR) - cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL - cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL - $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) - $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) - cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c - $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c . - -$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs - copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs - -#---------------------------------------------------------------------------------- -Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) - $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) - -Extensions_clean : - -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean - -#---------------------------------------------------------------------------------- - - -doc: $(PERLEXE) - $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ - --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ - --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse - -utils: $(PERLEXE) $(X2P) - cd ..\utils && $(MAKE) PERL=$(MINIPERL) - copy ..\README.aix ..\pod\perlaix.pod - copy ..\README.amiga ..\pod\perlamiga.pod - copy ..\README.apollo ..\pod\perlapollo.pod - copy ..\README.beos ..\pod\perlbeos.pod - copy ..\README.bs2000 ..\pod\perlbs2000.pod - copy ..\README.cygwin ..\pod\perlcygwin.pod - copy ..\README.dgux ..\pod\perldgux.pod - copy ..\README.dos ..\pod\perldos.pod - copy ..\README.epoc ..\pod\perlepoc.pod - copy ..\README.hpux ..\pod\perlhpux.pod - copy ..\README.hurd ..\pod\perlhurd.pod - copy ..\README.machten ..\pod\perlmachten.pod - copy ..\README.macos ..\pod\perlmacos.pod - copy ..\README.mint ..\pod\perlmint.pod - copy ..\README.mpeix ..\pod\perlmpeix.pod - copy ..\README.netware ..\pod\perlnetware.pod - copy ..\README.os2 ..\pod\perlos2.pod - copy ..\README.os390 ..\pod\perlos390.pod - copy ..\README.plan9 ..\pod\perlplan9.pod - copy ..\README.qnx ..\pod\perlqnx.pod - copy ..\README.solaris ..\pod\perlsolaris.pod - copy ..\README.tru64 ..\pod\perltru64.pod - copy ..\README.vmesa ..\pod\perlvmesa.pod - copy ..\vms\perlvms.pod ..\pod\perlvms.pod - copy ..\README.vos ..\pod\perlvos.pod - copy ..\README.win32 ..\pod\perlwin32.pod - cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters - cd ..\lib && $(PERLEXE) lib_pm.PL - $(PERLEXE) $(PL2BAT) $(UTILS) - -distclean: clean - -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ - $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) - -del /f *.def *.map - -del /f $(EXTDIR)\DynaLoader\dl_win32.xs - -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm - -del /f $(LIBDIR)\XSLoader.pm - -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm - -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm - -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm - -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm - -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm - -del /f $(LIBDIR)\PerlIO\Scalar.pm - -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm - -del /f $(LIBDIR)\File\Glob.pm - -del /f $(LIBDIR)\Storable.pm - -del /f $(LIBDIR)\Filter\Util\Call.pm - -del /f $(LIBDIR)\Digest\MD5.pm - -del /f $(LIBDIR)\MIME\Base64.pm - -del /f $(LIBDIR)\MIME\QuotedPrint.pm - -del /f $(LIBDIR)\Time\HiRes.pm - -del /f $(LIBDIR)\List\Util.pm - -del /f $(LIBDIR)\Scalar\Util.pm - -del /f $(LIBDIR)\Time\Piece.pm - -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO - -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread - -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B - -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data - -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter - -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter - -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest - -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME - -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List - -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar - -cd $(PODDIR) && del /f *.html *.bat checkpods \ - perlaix.pod perlamiga.pod perlapollo.pod \ - perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \ - perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \ - perlmachten.pod perlmint.pod \ - perlmacos.pod perlmpeix.pod perlnetware.pod \ - perlos2.pod perlos390.pod \ - perlplan9.pod perlqnx.pod \ - perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ - perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ - podchecker podselect - -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \ - dprofpp *.bat - -cd ..\x2p && del /f find2perl s2p *.bat - -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new - -del /f $(CONFIGPM) - -del /f bin\*.bat - -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \ - pm_to_blib - -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) - -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) - -install : all installbare installhtml - -installbare : $(RIGHTMAKE) utils - $(PERLEXE) ..\installperl - if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* - $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* - $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* - -installhtml : doc - $(RCOPY) html\*.* $(INST_HTML)\*.* - -inst_lib : $(CONFIGPM) - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - $(RCOPY) ..\lib $(INST_LIB)\*.* - -minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils - $(XCOPY) $(MINIPERL) ..\t\perl.exe -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF - attrib -r ..\t\*.* - copy test ..\t - cd ..\t && \ - $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t - -test-prep : all utils - $(XCOPY) $(PERLEXE) ..\t\$(NULL) - $(XCOPY) $(PERLDLL) ..\t\$(NULL) -.IF "$(CCTYPE)" == "BORLAND" - $(XCOPY) $(GLOBBAT) ..\t\$(NULL) -.ELSE - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) -.ENDIF - -test : $(RIGHTMAKE) test-prep - cd ..\t && $(PERLEXE) -I..\lib harness - -test-notty : test-prep - set PERL_SKIP_TTY_TEST=1 && \ - cd ..\t && $(PERLEXE) -I.\lib harness - -test-wide : test-prep - set HARNESS_PERL_SWITCHES=-C && \ - cd ..\t && $(PERLEXE) -I..\lib harness - -test-wide-notty : test-prep - set PERL_SKIP_TTY_TEST=1 && \ - set HARNESS_PERL_SWITCHES=-C && \ - cd ..\t && $(PERLEXE) -I..\lib harness - -clean : Extensions_clean - -@erase miniperlmain$(o) - -@erase $(MINIPERL) - -@erase perlglob$(o) - -@erase perlmain$(o) - -@erase config.w32 - -@erase /f config.h - -@erase $(GLOBEXE) - -@erase $(PERLEXE) - -@erase $(WPERLEXE) - -@erase $(PERLDLL) - -@erase $(CORE_OBJ) - -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) - -@erase $(WIN32_OBJ) - -@erase $(DLL_OBJ) - -@erase $(X2P_OBJ) - -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res - -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat - -@erase ..\x2p\*.exe ..\x2p\*.bat - -@erase *.ilk - -@erase *.pdb - -# Handy way to run perlbug -ok without having to install and run the -# installed perlbug. We don't re-run the tests here - we trust the user. -# Please *don't* use this unless all tests pass. -# If you want to report test failures, use "dmake nok" instead. -ok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" - -okfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok - -nok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" - -nokfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok +# +# Makefile to build perl on Windows NT using DMAKE. +# Supported compilers: +# Visual C++ 2.0 thro 6.0 +# Borland C++ 5.02 +# Mingw32 with gcc-2.95.2 or better **experimental** +# +# This is set up to build a perl.exe that runs off a shared library +# (perl57.dll). Also makes individual DLLs for the XS extensions. +# + +## +## Make sure you read README.win32 *before* you mess with anything here! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "dmake install" to put your +# newly built perl. +# +INST_DRV *= c: +INST_TOP *= $(INST_DRV)\perl + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +INST_VER *= \5.7.1 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +INST_ARCH *= \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +USE_MULTI *= define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +USE_ITHREADS *= define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +USE_IMP_SYS *= define + +# +# uncomment to enable the experimental PerlIO I/O subsystem. +USE_PERLIO = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS *= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS above. +# +#USE_OBJECT *= define + +# +# uncomment exactly one of the following +# +# Visual C++ 2.x +#CCTYPE *= MSVC20 +# Visual C++ > 2.x and < 6.x +#CCTYPE *= MSVC +# Visual C++ >= 6.x +CCTYPE *= MSVC60 +# Borland 5.02 or later +#CCTYPE *= BORLAND +# mingw32+gcc-2.95.2 or better +#CCTYPE *= GCC + +# +# uncomment this if your Borland compiler is older than v5.4. +BCCOLD = define +# +# uncomment this if you want to use Borland's VCL as your CRT +#BCCVCL = define + +# +# uncomment this if you are compiling under Windows 95/98 and command.com +# (not needed if you're running under 4DOS/NT 6.01 or later) +#IS_WIN95 *= define + +# +# uncomment next line if you want debug version of perl (big,slow) +# If not enabled, we automatically try to use maximum optimization +# with all compilers that are known to have a working optimizer. +# +CFG *= Debug + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT *= define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this options enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful. This option is supported only with +# Visual C. +# +#USE_SETARGV *= define + +# +# if you have the source for des_fcrypt(), uncomment this and make sure the +# file exists (see README.win32). File should be located in the same +# directory as this file. +# +#CRYPT_SRC *= fcrypt.c + +# +# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment this, and make sure the library exists (see README.win32) +# Specify the full pathname of the library. +# +#CRYPT_LIB *= fcrypt.lib + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC *= define + +# +# set the install locations of the compiler include/libraries +# Running VCVARS32.BAT is *required* when using Visual C. +# Some versions of Visual C don't define MSVCDIR in the environment, +# so you may have to set CCHOME explicitly (spaces in the path name should +# not be quoted) +# +#CCHOME *= F:\borland\bc5 +CCHOME *= $(MSVCDIR) +#CCHOME *= c:\gcc-2.95.2 +CCINCDIR *= $(CCHOME)\include +CCLIBDIR *= $(CCHOME)\lib + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT += -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT += -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS *= + +# +# set this to point to cmd.exe (only needed if you use some +# alternate shell that doesn't grok cmd.exe style commands) +# +#SHELL *= g:\winnt\system32\cmd.exe + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL *= + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +.ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +PERL_MALLOC != undef +USE_5005THREADS != undef +USE_MULTI != undef +USE_IMP_SYS != define +.ENDIF + +PERL_MALLOC *= undef + +USE_5005THREADS *= undef + +.IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS != undef +.ENDIF + +.IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC != undef +.ENDIF + +USE_MULTI *= undef +USE_OBJECT *= undef +USE_ITHREADS *= undef +USE_IMP_SYS *= undef +USE_PERLIO *= undef +USE_PERLCRT *= undef + +.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI != define +.ENDIF + +.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI != define +USE_5005THREADS != undef +.ENDIF + +.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT += -DPERL_IMPLICIT_CONTEXT +.ENDIF + +.IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT += -DPERL_IMPLICIT_SYS +.ENDIF + +.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE + +PROCESSOR_ARCHITECTURE *= x86 + +.IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +.ELIF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +.ELIF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +.ELSE +.IF "$(USE_PERLIO)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio +.ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +.ENDIF +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +.ENDIF + +.IF "$(USE_ITHREADS)" == "define" +ARCHNAME !:= $(ARCHNAME)-thread +.ENDIF + +# Visual Studio 98 specific +.IF "$(CCTYPE)" == "MSVC60" + +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib + +.IF "$(CFG)" == "Debug" +.ELSE +# VC 6.0 seems capable of compiling perl correctly with optimizations +# enabled. Anything earlier fails tests. +CFG *= Optimize +.ENDIF +.ENDIF + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_TOP)$(INST_VER)\html + +# +# Programs to compile, build .lib files and link +# + +.USESHELL : + +.IF "$(CCTYPE)" == "BORLAND" + +CC = bcc32 +.IF "$(BCCOLD)" != "define" +LINK32 = ilink32 +.ELSE +LINK32 = tlink32 +.ENDIF +LIB32 = tlib /P128 +IMPLIB = implib -c +RSC = rc + +# +# Options +# +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)" +#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -P + +LIBC = cw32mti.lib +LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -v -D_RTLDLL -DDEBUGGING +LINK_DBG = -v +.ELSE +OPTIMIZE = -O2 -D_RTLDLL +LINK_DBG = +.ENDIF + +CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -e +LIBOUT_FLAG = +.IF "$(BCCOLD)" != "define" +LINK_FLAGS += -Gn +DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410 +.END +.IF "$(BCCVCL)" == "define" +LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib +LINK_FLAGS += -L"$(CCLIBDIR)\Release" +.END + + +.ELIF "$(CCTYPE)" == "GCC" + +CC = gcc +LINK32 = gcc +LIB32 = ar rc +IMPLIB = dlltool +RSC = rc + +i = .i +o = .o +a = .a + +# +# Options +# + +INCLUDES = -I.\include -I. -I.. -I$(COREDIR) +DEFINES = -DWIN32 $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -xc++ + +LIBC = -lmsvcrt + +# same libs as MSVC +LIBFILES = $(CRYPT_LIB) $(LIBC) \ + -lmoldname -lkernel32 -luser32 -lgdi32 \ + -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ + -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \ + -lwinmm -lversion -lodbc32 + +.IF "$(CFG)" == "Debug" +OPTIMIZE = -g -O2 -DDEBUGGING +LINK_DBG = -g +.ELSE +OPTIMIZE = -g -O2 +LINK_DBG = -g +.ENDIF + +CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) +LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" +OBJOUT_FLAG = -o +EXEOUT_FLAG = -o +LIBOUT_FLAG = + +# NOTE: we assume that GCC uses MSVCRT.DLL +BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX + +.ELSE + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +.IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +.ELSE +LIBC = PerlCRT.lib +.ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +.IF "$(CFG)" == "Debug" +.IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -Od -MD -Z7 -DDEBUGGING +LINK_DBG = -debug -pdb:none +.ELSE +# -Zi requires .pdb file(s) +#OPTIMIZE = -Od -MD -Zi -DDEBUGGING +#LINK_DBG = -debug +OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING +LINK_DBG = -debug -debugtype:both -pdb:none +.ENDIF +.ELSE +.IF "$(CFG)" == "Optimize" +# -O1 yields smaller code, which turns out to be faster than -O2 +#OPTIMIZE = -O2 -MD -DNDEBUG +OPTIMIZE = -O1 -MD -DNDEBUG +.ELSE +OPTIMIZE = -Od -MD -DNDEBUG +.ENDIF +LINK_DBG = -release +.ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe +LIBOUT_FLAG = /out: + +.IF "$(USE_PERLCRT)" != "define" +BUILDOPT += -DPERL_MSVCRT_READFIX +.ENDIF + +.ENDIF + +.IF "$(USE_OBJECT)" == "define" +OPTIMIZE += $(CXX_FLAG) +BUILDOPT += -DPERL_OBJECT +.ENDIF + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +# used to allow local linking flags that are not propogated into Config.pm, +# currently unused +# -- BKS, 12-12-1999 +PRIV_LINK_FLAGS *= +BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o *= .obj +a *= .lib + +LKPRE = INPUT ( +LKPOST = ) + +# +# Rules +# + +.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res + +.c$(o): + $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< + +.c.i: + $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@ + +.y.c: + $(NOOP) + +$(o).dll: +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def + $(IMPLIB) $(*B).lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) + $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ +.ELSE + $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ + -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) +.ENDIF + +.rc.res: + $(RSC) -i.. $< + +# +# various targets +MINIPERL = ..\miniperl.exe +MINIDIR = .\mini +PERLEXE = ..\perl.exe +WPERLEXE = ..\wperl.exe +GLOBEXE = ..\perlglob.exe +CONFIGPM = ..\lib\Config.pm +MINIMOD = ..\lib\ExtUtils\Miniperl.pm +X2P = ..\x2p\a2p.exe + +# Nominate a target which causes extensions to be re-built +# This used to be $(PERLEXE), but at worst it is the .dll that they depend +# on and really only the interface - i.e. the .def file used to export symbols +# from the .dll +PERLDEP = perldll.def + + +PL2BAT = bin\pl2bat.pl +GLOBBAT = bin\perlglob.bat + +UTILS = \ + ..\utils\h2ph \ + ..\utils\splain \ + ..\utils\dprofpp \ + ..\utils\perlbug \ + ..\utils\pl2pm \ + ..\utils\c2ph \ + ..\utils\h2xs \ + ..\utils\perldoc \ + ..\utils\perlcc \ + ..\pod\checkpods \ + ..\pod\pod2html \ + ..\pod\pod2latex \ + ..\pod\pod2man \ + ..\pod\pod2text \ + ..\pod\pod2usage \ + ..\pod\podchecker \ + ..\pod\podselect \ + ..\x2p\find2perl \ + ..\x2p\s2p \ + bin\exetype.pl \ + bin\runperl.pl \ + bin\pl2bat.pl \ + bin\perlglob.pl \ + bin\search.pl + +.IF "$(CCTYPE)" == "BORLAND" + +CFGSH_TMPL = config.bc +CFGH_TMPL = config_H.bc + +.ELIF "$(CCTYPE)" == "GCC" + +CFGSH_TMPL = config.gc +CFGH_TMPL = config_H.gc +PERLIMPLIB = ..\libperl57$(a) + +.ELSE + +CFGSH_TMPL = config.vc +CFGH_TMPL = config_H.vc + +.ENDIF + +# makedef.pl must be updated if this changes, and this should normally +# only change when there is an incompatible revision of the public API. +# XXX so why did we change it from perl56 to perl57? +PERLIMPLIB *= ..\perl57$(a) +PERLDLL = ..\perl57.dll + +XCOPY = xcopy /f /r /i /d +RCOPY = xcopy /f /r /i /e /d +NOOP = @echo + +# +# filenames given to xsubpp must have forward slashes (since it puts +# full pathnames in #line strings) +XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ + -C++ -prototypes + +MICROCORE_SRC = \ + ..\av.c \ + ..\deb.c \ + ..\doio.c \ + ..\doop.c \ + ..\dump.c \ + ..\globals.c \ + ..\gv.c \ + ..\hv.c \ + ..\locale.c \ + ..\mg.c \ + ..\numeric.c \ + ..\op.c \ + ..\perl.c \ + ..\perlapi.c \ + ..\perly.c \ + ..\pp.c \ + ..\pp_ctl.c \ + ..\pp_hot.c \ + ..\pp_pack.c \ + ..\pp_sys.c \ + ..\regcomp.c \ + ..\regexec.c \ + ..\run.c \ + ..\scope.c \ + ..\sv.c \ + ..\taint.c \ + ..\toke.c \ + ..\universal.c \ + ..\utf8.c \ + ..\util.c \ + ..\xsutils.c + +EXTRACORE_SRC += perllib.c + +.IF "$(PERL_MALLOC)" == "define" +EXTRACORE_SRC += ..\malloc.c +.ENDIF + +.IF "$(USE_OBJECT)" != "define" +EXTRACORE_SRC += ..\perlio.c +.ENDIF + +WIN32_SRC = \ + .\win32.c \ + .\win32io.c \ + .\win32sck.c \ + .\win32thread.c + +.IF "$(CRYPT_SRC)" != "" +WIN32_SRC += .\$(CRYPT_SRC) +.ENDIF + +DLL_SRC = $(DYNALOADER).c + +X2P_SRC = \ + ..\x2p\a2p.c \ + ..\x2p\hash.c \ + ..\x2p\str.c \ + ..\x2p\util.c \ + ..\x2p\walk.c + +CORE_NOCFG_H = \ + ..\av.h \ + ..\cop.h \ + ..\cv.h \ + ..\dosish.h \ + ..\embed.h \ + ..\form.h \ + ..\gv.h \ + ..\handy.h \ + ..\hv.h \ + ..\iperlsys.h \ + ..\mg.h \ + ..\nostdio.h \ + ..\op.h \ + ..\opcode.h \ + ..\perl.h \ + ..\perlapi.h \ + ..\perlsdio.h \ + ..\perlsfio.h \ + ..\perly.h \ + ..\pp.h \ + ..\proto.h \ + ..\regexp.h \ + ..\scope.h \ + ..\sv.h \ + ..\thread.h \ + ..\unixish.h \ + ..\utf8.h \ + ..\util.h \ + ..\warnings.h \ + ..\XSUB.h \ + ..\EXTERN.h \ + ..\perlvars.h \ + ..\intrpvar.h \ + ..\thrdvar.h \ + .\include\dirent.h \ + .\include\netdb.h \ + .\include\sys\socket.h \ + .\win32.h + +CORE_H = $(CORE_NOCFG_H) .\config.h + +MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) +CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) +WIN32_OBJ = $(WIN32_SRC:db:+$(o)) +MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} +MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} +MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) +DLL_OBJ = $(DLL_SRC:db:+$(o)) +X2P_OBJ = $(X2P_SRC:db:+$(o)) + +PERLDLL_OBJ = $(CORE_OBJ) +PERLEXE_OBJ = perlmain$(o) + +PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) + +.IF "$(USE_SETARGV)" != "" +SETARGV_OBJ = setargv$(o) +.ENDIF + +DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ + Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ + Sys/Hostname Storable Filter/Util/Call Encode \ + Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece +STATIC_EXT = DynaLoader +NONXS_EXT = Errno + +DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader + +POD2HTML = $(PODDIR)\pod2html +POD2MAN = $(PODDIR)\pod2man +POD2LATEX = $(PODDIR)\pod2latex +POD2TEXT = $(PODDIR)\pod2text + +# vars must be separated by "\t+~\t+", since we're using the tempfile +# version of config_sh.pl (we were overflowing someone's buffer by +# trying to fit them all on the command line) +# -- BKS 10-17-1999 +CFG_VARS = \ + INST_DRV=$(INST_DRV) ~ \ + INST_TOP=$(INST_TOP:s/\/\\/) ~ \ + INST_VER=$(INST_VER:s/\/\\/) ~ \ + INST_ARCH=$(INST_ARCH) ~ \ + archname=$(ARCHNAME) ~ \ + cc=$(CC) ~ \ + ld=$(LINK32) ~ \ + ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ + cf_email=$(EMAIL) ~ \ + d_crypt=$(D_CRYPT) ~ \ + d_mymalloc=$(PERL_MALLOC) ~ \ + libs=$(LIBFILES:f) ~ \ + incpath=$(CCINCDIR:s/\/\\/) ~ \ + libperl=$(PERLIMPLIB:f) ~ \ + libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \ + libc=$(LIBC) ~ \ + make=dmake ~ \ + _o=$(o) obj_ext=$(o) ~ \ + _a=$(a) lib_ext=$(a) ~ \ + static_ext=$(STATIC_EXT) ~ \ + use5005threads=$(USE_5005THREADS) ~ \ + useithreads=$(USE_ITHREADS) ~ \ + usethreads=$(USE_5005THREADS) ~ \ + usemultiplicity=$(USE_MULTI) ~ \ + useperlio=$(USE_PERLIO) ~ \ + LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \ + optimize=$(OPTIMIZE) + +# +# set up targets varying between Win95 and WinNT builds +# + +.IF "$(IS_WIN95)" == "define" +MK2 = .\makefile.95 +RIGHTMAKE = __switch_makefiles +NOOP = @rem +.ELSE +MK2 = __not_needed +RIGHTMAKE = +.ENDIF + +# +# Top targets +# + +all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \ + $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ + $(X2P) Extensions + +$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c + +#---------------------------------------------------------------- + +#-------------------- BEGIN Win95 SPECIFIC ---------------------- + +# this target is a jump-off point for Win95 +# 1. it switches to the Win95-specific makefile if it exists +# (__do_switch_makefiles) +# 2. it prints a message when the Win95-specific one finishes (__done) +# 3. it then kills this makefile by trying to make __no_such_target + +__switch_makefiles: __do_switch_makefiles __done __no_such_target + +__do_switch_makefiles: +.IF "$(NOTFIRST)" != "true" + if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true +.ELSE + $(NOOP) +.ENDIF + +.IF "$(NOTFIRST)" != "true" +__done: + @echo Build process complete. Ignore any errors after this message. + @echo Run "dmake test" to test and "dmake install" to install + +.ELSE +# dummy targets for Win95-specific makefile + +__done: + $(NOOP) + +__no_such_target: + $(NOOP) + +.ENDIF + +# This target is used to generate the new makefile (.\makefile.95) for Win95 + +.\makefile.95: .\makefile.mk + $(MINIPERL) genmk95.pl makefile.mk $(MK2) + +#--------------------- END Win95 SPECIFIC --------------------- + +# a blank target for when builds don't need to do certain things +# this target added for Win95 port but used to keep the WinNT port able to +# use this file +__not_needed: + $(NOOP) + +$(GLOBEXE) : perlglob$(o) +.IF "$(CCTYPE)" == "BORLAND" + $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c + $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \ + "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib, +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) +.ELSE + $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ + perlglob$(o) setargv$(o) +.ENDIF + +perlglob$(o) : perlglob.c + +config.w32 : $(CFGSH_TMPL) + copy $(CFGSH_TMPL) config.w32 + +.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) + -del /f config.h + copy $(CFGH_TMPL) config.h + +..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm + $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ + $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ + $(CFGSH_TMPL) > ..\config.sh + -cd .. && del /f perl.exe + cd .. && perl configpm + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. && miniperl configpm + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ + || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\)) +.ENDIF + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless +# unless the .IF is true), so instead we use a .ELSE with the default. +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h + +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h +.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +.ELSE + $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c +.ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ + $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpd -ap $(BLINK_FLAGS) \ + @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \ + $@,\n \ + $(LIBFILES)\n \ + perldll.def\n) + $(IMPLIB) $*.lib $@ +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) + dlltool --output-lib $(PERLIMPLIB) \ + --dllname $(PERLDLL:b).dll \ + --def perldll.def \ + --base-file perl.base \ + --output-exp perl.exp + $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \ + perl.exp $(LKPOST)) +.ELSE + $(LINK32) -dll -def:perldll.def -out:$@ \ + @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \ + $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)) +.ENDIF + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -v -o $@ $(BLINK_FLAGS) \ + $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST)) +.ELSE + $(LINK32) -subsystem:console -out:$@ \ + @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\)) +.ENDIF + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) +.IF "$(CCTYPE)" == "BORLAND" + $(LINK32) -Tpe -ap $(BLINK_FLAGS) \ + @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \ + $(@:s,\,\\),\n \ + $(PERLIMPLIB) $(LIBFILES)\n) +.ELIF "$(CCTYPE)" == "GCC" + $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ + $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES) +.ELSE + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) +.ENDIF + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c + $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c . + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +#---------------------------------------------------------------------------------- +Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) + $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) + +Extensions_clean : + -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean + +#---------------------------------------------------------------------------------- + + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils && $(MAKE) PERL=$(MINIPERL) + copy ..\README.aix ..\pod\perlaix.pod + copy ..\README.amiga ..\pod\perlamiga.pod + copy ..\README.apollo ..\pod\perlapollo.pod + copy ..\README.beos ..\pod\perlbeos.pod + copy ..\README.bs2000 ..\pod\perlbs2000.pod + copy ..\README.cygwin ..\pod\perlcygwin.pod + copy ..\README.dgux ..\pod\perldgux.pod + copy ..\README.dos ..\pod\perldos.pod + copy ..\README.epoc ..\pod\perlepoc.pod + copy ..\README.hpux ..\pod\perlhpux.pod + copy ..\README.hurd ..\pod\perlhurd.pod + copy ..\README.machten ..\pod\perlmachten.pod + copy ..\README.macos ..\pod\perlmacos.pod + copy ..\README.mint ..\pod\perlmint.pod + copy ..\README.mpeix ..\pod\perlmpeix.pod + copy ..\README.netware ..\pod\perlnetware.pod + copy ..\README.os2 ..\pod\perlos2.pod + copy ..\README.os390 ..\pod\perlos390.pod + copy ..\README.plan9 ..\pod\perlplan9.pod + copy ..\README.qnx ..\pod\perlqnx.pod + copy ..\README.solaris ..\pod\perlsolaris.pod + copy ..\README.tru64 ..\pod\perltru64.pod + copy ..\README.uts ..\pod\perluts.pod + copy ..\README.vmesa ..\pod\perlvmesa.pod + copy ..\vms\perlvms.pod ..\pod\perlvms.pod + copy ..\README.vos ..\pod\perlvos.pod + copy ..\README.win32 ..\pod\perlwin32.pod + cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters + cd ..\lib && $(PERLEXE) lib_pm.PL + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\PerlIO\Scalar.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -del /f $(LIBDIR)\Storable.pm + -del /f $(LIBDIR)\Filter\Util\Call.pm + -del /f $(LIBDIR)\Digest\MD5.pm + -del /f $(LIBDIR)\MIME\Base64.pm + -del /f $(LIBDIR)\MIME\QuotedPrint.pm + -del /f $(LIBDIR)\Time\HiRes.pm + -del /f $(LIBDIR)\List\Util.pm + -del /f $(LIBDIR)\Scalar\Util.pm + -del /f $(LIBDIR)\Time\Piece.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data + -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter + -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter + -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest + -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME + -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List + -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar + -cd $(PODDIR) && del /f *.html *.bat checkpods \ + perlaix.pod perlamiga.pod perlapollo.pod \ + perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \ + perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \ + perlmachten.pod perlmint.pod \ + perlmacos.pod perlmpeix.pod perlnetware.pod \ + perlos2.pod perlos390.pod \ + perlplan9.pod perlqnx.pod \ + perlsolaris.pod perltru64.pod perluts.pod \ + perlvmesa.pod perlvms.pod perlvos.pod \ + perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ + podchecker podselect + -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \ + dprofpp *.bat + -cd ..\x2p && del /f find2perl s2p *.bat + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \ + pm_to_blib + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : $(RIGHTMAKE) utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + attrib -r ..\t\*.* + copy test ..\t + cd ..\t && \ + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) +.IF "$(CCTYPE)" == "BORLAND" + $(XCOPY) $(GLOBBAT) ..\t\$(NULL) +.ELSE + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) +.ENDIF + +test : $(RIGHTMAKE) test-prep + cd ..\t && $(PERLEXE) -I..\lib harness + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + cd ..\t && $(PERLEXE) -I.\lib harness + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 && \ + set HARNESS_PERL_SWITCHES=-C && \ + cd ..\t && $(PERLEXE) -I..\lib harness + +clean : Extensions_clean + -@erase miniperlmain$(o) + -@erase $(MINIPERL) + -@erase perlglob$(o) + -@erase perlmain$(o) + -@erase config.w32 + -@erase /f config.h + -@erase $(GLOBEXE) + -@erase $(PERLEXE) + -@erase $(WPERLEXE) + -@erase $(PERLDLL) + -@erase $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) + -@erase $(WIN32_OBJ) + -@erase $(DLL_OBJ) + -@erase $(X2P_OBJ) + -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res + -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@erase ..\x2p\*.exe ..\x2p\*.bat + -@erase *.ilk + -@erase *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "dmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok