Add README.uts from Hal Morris.

p4raw-id: //depot/perl@11324

diff --git a/MANIFEST b/MANIFEST
index f552fe6..7e291a8 100644 (file)
--- a/MANIFEST
+++ b/MANIFEST
@@ -1821,6 +1821,7 @@ README.qnx                Notes about QNX port
 README.solaris         Notes about Solaris port
 README.threads         Notes about multithreading
 README.tru64           Notes about Tru64
+README.uts             Notes about UTS
 README.vmesa           Notes about VM/ESA port
 README.vms             Notes about installing the VMS port
 README.vos             Notes about Stratus VOS port

diff --git a/README.uts b/README.uts
new file mode 100644 (file)
index 0000000..2025e37
--- /dev/null
+++ b/README.uts
@@ -0,0 +1,107 @@
+If you read this file _as_is_, just ignore the funny characters you
+see. It is written in the POD format (see perlpod manpage) which is
+specially designed to be readable as is.
+
+=head1 NAME
+
+perluts - Perl under UTS
+
+=head1 SYNOPSIS
+
+This document can be read I<as is>: as F<README.uts>, or you
+can read it after you build your package using "man perluts".
+
+The purpose is to help you build Perl for UTS, which, if you
+follow these instructions, should be easy, and result in
+a solidly working installation.
+
+=head1 DESCRIPTION
+
+Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS
+
+=head1 BUILDING PERL ON UTS
+
+NOTE: Some sites have redefined the way uname works, and if yours
+does this, special steps must be taken so that Configure can
+recognize your system as a UTS system.  To see if you are in
+this category, issue the command "uname -a".  It should look
+something like:
+
+  uts juno 4 4.4 9672 370
+
+At any rate, the first field should be "uts".  If this is not
+the case; supposing it is, say telcoUTS, create a script, uts/uname
+(i.e. uname, in the subdirectory "uts" of the main Perl source dir):
+   # uname
+   /usr/bin/uname "$@" | sed -e 's/^telcoUTS/uts/'
+
+and when you execute Configure, do it as below, except for adding
+PATH=uts:$PATH as a prefix.  I.e. do:
+
+   PATH=uts:$PATH ./Configure ...
+
+There is no need to do an interactive configure, just type
+
+  ./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out
+
+"-Dusedevel" may be required to configure Perl 5.7.2 non-interactively.
+Use -Doptimize=-g if you want to run Perl under sdb or gdb, OR
+if you want to be able to use the -D command line flags to perl,
+which are occasionally useful in debugging perl scripts.
+
+In this and the following steps, the "2>&1 | tee XXX.out" records all
+output from the process, which will be useful if anything unexpected
+goes wrong.
+
+Then do the compilation with
+
+  make 2>&1 | tee make.out
+
+Finally, test using
+
+  make test 2>&1 | tee make-test.out
+
+In the output, the only failures you should see should look like:
+
+   lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ...
+   FAILED at test 57
+   lib/Math/BigInt/t/bigintc..........ok
+   lib/Math/BigInt/t/bigintpm.........FAILED at test 204
+   lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ...
+   Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314.
+   FAILED at test 71
+   lib/Math/Complex...................exp: OVERFLOW
+   FAILED at test 250
+   lib/Math/Trig......................exp: OVERFLOW
+   ok
+   lib/Memoize/t/array................ok
+       ...
+   lib/Net/protoent...................ok
+   lib/Net/servent....................FAILED at test 0
+
+This means that everything passes except for some problems in the
+packages "Math::BigInt", "Math::Complex", and "Math::Trig".
+The lib/Net/servent failure seems to be a bug in the test
+program.  To confirm this, from the main Perl source dir, do:
+
+   LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t
+
+and it should output
+
+   1..3
+   ok 1
+   ok 2
+   ok 3
+
+=head1 Installing the built perl on UTS
+
+Run the command "make install"
+
+=head1 AUTHOR
+
+   Hal Morris
+   UTS Global LLC
+   email: hom00@utsglobal.com
+
+=cut
+

diff --git a/pod/buildtoc.PL b/pod/buildtoc.PL
index 7b54ed3..8bec944 100644 (file)
--- a/pod/buildtoc.PL
+++ b/pod/buildtoc.PL
@@ -82,6 +82,7 @@ if (-d "pod") {
     perlplan9
     perlsolaris
     perltru64
+    perluts
     perlvmesa
     perlvms             
     perlvos             

diff --git a/pod/perl.pod b/pod/perl.pod
index 6138274..634a38b 100644 (file)
--- a/pod/perl.pod
+++ b/pod/perl.pod
@@ -131,6 +131,7 @@ For ease of access, the Perl manual has been split up into several sections:
     perlqnx            Perl notes for QNX
     perlsolaris        Perl notes for Solaris
     perltru64          Perl notes for Tru64
+    perluts             Perl notes for UTS
     perlvmesa          Perl notes for VM/ESA
     perlvms            Perl notes for VMS
     perlvos            Perl notes for Stratus VOS

diff --git a/pod/perl572delta.pod b/pod/perl572delta.pod
index 18cc96a..66e87f0 100644 (file)
--- a/pod/perl572delta.pod
+++ b/pod/perl572delta.pod
@@ -678,15 +678,7 @@ These tests fail because of yet unresolved floating point inaccuracies.
 
 =head2 UTS
 
-Many floating point inaccuracies:
-
-  op/numconvert              511,657,658,659,665-667,831,991,1151
-  op/pack                    10,22,149,156
-  op/sprintf                 8,10,13,102-107,134-135,146-153,159-162
-  lib/Math/BigInt/bigintpm   1145,1183
-  lib/Math/Complex           250,257,514,521,722-724,
-                             934,935,945,949,955,956,975,976
-  ext/POSIX/POSIX            14
+There are a few known test failures, see L<perluts>.
 
 =head2 VMS
 

diff --git a/pod/perltoc.pod b/pod/perltoc.pod
index 0cc4170..869975c 100644 (file)
--- a/pod/perltoc.pod
+++ b/pod/perltoc.pod
@@ -2241,8 +2241,8 @@ Term::Complete, Term::ReadLine, Test, Test::Harness, Test::More,
 Test::Simple, Text::Abbrev, Text::Balanced, Text::ParseWords,
 Text::Soundex, Text::Tabs, Text::Wrap, Tie::Array, Tie::Handle, Tie::Hash,
 Tie::RefHash, Tie::Scalar, Tie::SubstrHash, Time::Local, Time::gmtime,
-Time::localtime, Time::tm, UNIVERSAL, Unicode::UCD, User::grent,
-User::pwent, Win32
+Time::localtime, Time::tm, UNIVERSAL, UnicodeCD, User::grent, User::pwent,
+Win32
 
 =item Extension Modules
 
@@ -6670,6 +6670,22 @@ Digital UNIX formerly known as DEC OSF/1) systems
 
 =back
 
+=head2 perluts - Perl under UTS
+
+=over 4
+
+=item SYNOPSIS
+
+=item DESCRIPTION
+
+=item BUILDING PERL ON UTS
+
+=item Installing the built perl on UTS
+
+=item AUTHOR
+
+=back
+
 =head2 perlvmesa, README.vmesa - building and installing Perl for VM/ESA.
 
 =over 4
@@ -8917,7 +8933,8 @@ C<uvsize>, C<uvtype>, C<uvuformat>, C<uvxformat>, C<uvXUformat>
 
 C<vendorarch>, C<vendorarchexp>, C<vendorbin>, C<vendorbinexp>,
 C<vendorlib>, C<vendorlib_stem>, C<vendorlibexp>, C<vendorprefix>,
-C<vendorprefixexp>, C<version>, C<versiononly>, C<vi>, C<voidflags>
+C<vendorprefixexp>, C<version>, C<version_patchlevel_string>,
+C<versiononly>, C<vi>, C<voidflags>
 
 =item x
 

diff --git a/win32/Makefile b/win32/Makefile
index c103f82..a6be3f4 100644 (file)
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -1,1139 +1,1141 @@
-#
-# Makefile to build perl on Windows NT using Microsoft NMAKE.
-# Supported compilers:
-#      Visual C++ 5.x (possibly other versions)
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll).  Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration.  Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "nmake install" to put your
-# newly built perl.
-#
-INST_DRV       = c:
-INST_TOP       = $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location.  Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to.  If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-#INST_VER = \5.7.1
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components.  This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files.  Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location.  Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-#INST_ARCH = \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters.  This is need for fork()
-# emulation.
-#
-USE_MULTI = define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation.  This needs
-# USE_MULTI as well.
-#
-USE_ITHREADS = define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl.  This needs USE_MULTI above.  This is also needed to
-# get fork().
-#
-USE_IMP_SYS = define
-
-#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO     = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities.  This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS       = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005.  This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT    = define
-
-#
-# uncomment one of the following lines if you are using either
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
-#
-#CCTYPE                = MSVC20
-#CCTYPE                = MSVC60
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-#
-#CFG           = Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT   = define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful.  This option is supported only with
-# Visual C.
-#
-#USE_SETARGV   = define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32).  File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC     = fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB     = fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.  Be prepared to recompile all
-# extensions if you change the default.  Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC   = define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME                = f:\msvc20
-CCHOME         = $(MSVCDIR)
-CCINCDIR       = $(CCHOME)\include
-CCLIBDIR       = $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution.  You most
-# probably just want to build modules that won't compile with
-#         perl Makefile.PL POLLUTE=1
-# instead of enabling this.  Please report such modules to the respective
-# authors.
-#
-#BUILDOPT      = $(BUILDOPT) -DPERL_POLLUTE
-
-#
-# This should normally be disabled.  Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT      = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled.  Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT      = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS   =
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL         =
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT                = undef
-!ELSE
-D_CRYPT                = define
-CRYPT_FLAG     = -DHAVE_DES_FCRYPT
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC    = undef
-USE_5005THREADS        = undef
-USE_MULTI      = undef
-USE_IMP_SYS    = define
-!ENDIF
-
-!IF "$(PERL_MALLOC)" == ""
-PERL_MALLOC    = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS        = undef
-!ENDIF
-
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS   = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC    = undef
-!ENDIF
-
-!IF "$(USE_MULTI)" == ""
-USE_MULTI      = undef
-!ENDIF
-
-!IF "$(USE_OBJECT)" == ""
-USE_OBJECT     = undef
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == ""
-USE_ITHREADS   = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" == ""
-USE_IMP_SYS    = undef
-!ENDIF
-
-!IF "$(USE_PERLIO)" == ""
-USE_PERLIO     = undef
-!ENDIF
-
-!IF "$(USE_PERLCRT)" == ""
-USE_PERLCRT    = undef
-!ENDIF
-
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI      = define
-!ENDIF
-
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI      = define
-USE_5005THREADS        = undef
-!ENDIF
-
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT       = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
-!ENDIF
-
-!IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT       = $(BUILDOPT) -DPERL_IMPLICIT_SYS
-!ENDIF
-
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""
-PROCESSOR_ARCHITECTURE = x86
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-!ELSE
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
-!IF "$(USE_MULTI)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-!ELSE
-!IF "$(USE_PERLIO)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
-!ELSE
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)
-!ENDIF
-!ENDIF
-!ENDIF
-!ENDIF
-
-!IF "$(USE_PERLIO)" == "define"
-BUILDOPT       = $(BUILDOPT) -DUSE_PERLIO
-!ENDIF
-
-!IF "$(USE_ITHREADS)" == "define"
-ARCHNAME       = $(ARCHNAME)-thread
-!ENDIF
-
-# Visual Studio 98 specific
-!IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand.  Makes the test suite
-# run in about 10% less time.
-DELAYLOAD      = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-!ENDIF
-
-ARCHDIR                = ..\lib\$(ARCHNAME)
-COREDIR                = ..\lib\CORE
-AUTODIR                = ..\lib\auto
-LIBDIR         = ..\lib
-EXTDIR         = ..\ext
-PODDIR         = ..\pod
-EXTUTILSDIR    = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT    = $(INST_TOP)$(INST_VER)\bin
-INST_BIN       = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB       = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB   = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR   = $(INST_ARCHLIB)\CORE
-INST_POD       = $(INST_LIB)\pod
-INST_HTML      = $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-CC             = cl
-LINK32         = link
-LIB32          = $(LINK32) -lib
-RSC            = rc
-
-#
-# Options
-#
-
-INCLUDES       = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS      = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES                = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS                = -DPERLDLL -DPERL_CORE
-SUBSYS         = console
-CXX_FLAG       = -TP -GX
-
-!IF "$(USE_PERLCRT)" != "define"
-LIBC   = msvcrt.lib
-!ELSE
-LIBC   = PerlCRT.lib
-!ENDIF
-
-PERLEXE_RES    =
-PERLDLL_RES    =
-
-!IF  "$(CFG)" == "Debug"
-!  IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE       = -Od -MD -Z7 -DDEBUGGING
-!  ELSE
-OPTIMIZE       = -Od -MD -Zi -DDEBUGGING
-!  ENDIF
-LINK_DBG       = -debug -pdb:none
-!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE      = -O2 -MD -DNDEBUG
-OPTIMIZE       = -O1 -MD -DNDEBUG
-LINK_DBG       = -release
-!ENDIF
-
-!IF "$(USE_OBJECT)" == "define"
-OPTIMIZE       = $(OPTIMIZE) $(CXX_FLAG)
-BUILDOPT       = $(BUILDOPT) -DPERL_OBJECT
-!ENDIF
-
-!IF "$(USE_PERLCRT)" != "define"
-BUILDOPT       = $(BUILDOPT) -DPERL_MSVCRT_READFIX
-!ENDIF
-
-LIBBASEFILES   = $(CRYPT_LIB) \
-               oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
-               comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
-               netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
-               version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES       = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS         = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-               $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS     = -nologo -nodefaultlib $(LINK_DBG) \
-               -libpath:"$(INST_COREDIR)" \
-               -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG    = -Fo
-EXEOUT_FLAG    = -Fe
-
-CFLAGS_O       = $(CFLAGS) $(BUILDOPT)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o = .obj
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
-
-.c$(o):
-       $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
-       $(NOOP)
-
-$(o).dll:
-       $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-           -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-
-.rc.res:
-       $(RSC) -i.. $<
-
-#
-# various targets
-
-# makedef.pl must be updated if this changes, and this should normally
-# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB     = ..\perl57.lib
-PERLDLL                = ..\perl57.dll
-
-MINIPERL       = ..\miniperl.exe
-MINIDIR                = .\mini
-PERLEXE                = ..\perl.exe
-WPERLEXE       = ..\wperl.exe
-GLOBEXE                = ..\perlglob.exe
-CONFIGPM       = ..\lib\Config.pm
-MINIMOD                = ..\lib\ExtUtils\Miniperl.pm
-X2P            = ..\x2p\a2p.exe
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP                = perldll.def
-
-PL2BAT         = bin\pl2bat.pl
-GLOBBAT                = bin\perlglob.bat
-
-UTILS          =                       \
-               ..\utils\h2ph           \
-               ..\utils\splain         \
-               ..\utils\dprofpp        \
-               ..\utils\perlbug        \
-               ..\utils\pl2pm          \
-               ..\utils\c2ph           \
-               ..\utils\h2xs           \
-               ..\utils\perldoc        \
-               ..\utils\perlcc         \
-               ..\pod\checkpods        \
-               ..\pod\pod2html         \
-               ..\pod\pod2latex        \
-               ..\pod\pod2man          \
-               ..\pod\pod2text         \
-               ..\pod\pod2usage        \
-               ..\pod\podchecker       \
-               ..\pod\podselect        \
-               ..\x2p\find2perl        \
-               ..\x2p\s2p              \
-               bin\exetype.pl          \
-               bin\runperl.pl          \
-               bin\pl2bat.pl           \
-               bin\perlglob.pl         \
-               bin\search.pl
-
-MAKE           = nmake -nologo
-MAKE_BARE      = nmake
-
-CFGSH_TMPL     = config.vc
-CFGH_TMPL      = config_H.vc
-
-XCOPY          = xcopy /f /r /i /d
-RCOPY          = xcopy /f /r /i /e /d
-NOOP           = @echo
-NULL           =
-
-DEL            = del
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP         = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-               -C++ -prototypes
-
-MICROCORE_SRC  =               \
-               ..\av.c         \
-               ..\deb.c        \
-               ..\doio.c       \
-               ..\doop.c       \
-               ..\dump.c       \
-               ..\globals.c    \
-               ..\gv.c         \
-               ..\hv.c         \
-               ..\locale.c     \
-               ..\mg.c         \
-               ..\numeric.c    \
-               ..\op.c         \
-               ..\perl.c       \
-               ..\perlapi.c    \
-               ..\perly.c      \
-               ..\pp.c         \
-               ..\pp_ctl.c     \
-               ..\pp_hot.c     \
-               ..\pp_pack.c    \
-               ..\pp_sys.c     \
-               ..\regcomp.c    \
-               ..\regexec.c    \
-               ..\run.c        \
-               ..\scope.c      \
-               ..\sv.c         \
-               ..\taint.c      \
-               ..\toke.c       \
-               ..\universal.c  \
-               ..\utf8.c       \
-               ..\util.c       \
-               ..\xsutils.c
-
-EXTRACORE_SRC  = $(EXTRACORE_SRC) perllib.c
-
-!IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC  = $(EXTRACORE_SRC) ..\malloc.c
-!ENDIF
-
-!IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC  = $(EXTRACORE_SRC) ..\perlio.c
-!ENDIF
-
-WIN32_SRC      =               \
-               .\win32.c       \
-               .\win32io.c     \
-               .\win32sck.c    \
-               .\win32thread.c
-
-!IF "$(CRYPT_SRC)" != ""
-WIN32_SRC      = $(WIN32_SRC) .\$(CRYPT_SRC)
-!ENDIF
-
-DLL_SRC                = $(DYNALOADER).c
-
-X2P_SRC                =               \
-               ..\x2p\a2p.c    \
-               ..\x2p\hash.c   \
-               ..\x2p\str.c    \
-               ..\x2p\util.c   \
-               ..\x2p\walk.c
-
-CORE_NOCFG_H   =               \
-               ..\av.h         \
-               ..\cop.h        \
-               ..\cv.h         \
-               ..\dosish.h     \
-               ..\embed.h      \
-               ..\form.h       \
-               ..\gv.h         \
-               ..\handy.h      \
-               ..\hv.h         \
-               ..\iperlsys.h   \
-               ..\mg.h         \
-               ..\nostdio.h    \
-               ..\op.h         \
-               ..\opcode.h     \
-               ..\perl.h       \
-               ..\perlapi.h    \
-               ..\perlsdio.h   \
-               ..\perlsfio.h   \
-               ..\perly.h      \
-               ..\pp.h         \
-               ..\proto.h      \
-               ..\regexp.h     \
-               ..\scope.h      \
-               ..\sv.h         \
-               ..\thread.h     \
-               ..\unixish.h    \
-               ..\utf8.h       \
-               ..\util.h       \
-               ..\warnings.h   \
-               ..\XSUB.h       \
-               ..\EXTERN.h     \
-               ..\perlvars.h   \
-               ..\intrpvar.h   \
-               ..\thrdvar.h    \
-               .\include\dirent.h      \
-               .\include\netdb.h       \
-               .\include\sys\socket.h  \
-               .\win32.h
-
-CORE_H         = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ  = $(MICROCORE_SRC:.c=.obj)
-CORE_OBJ       = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
-WIN32_OBJ      = $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ   = $(MICROCORE_OBJ:..\=.\mini\)  \
-                 $(MINIDIR)\miniperlmain$(o)   \
-                 $(MINIDIR)\perlio$(o)
-MINIWIN32_OBJ  = $(WIN32_OBJ:.\=.\mini\)
-MINI_OBJ       = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ                = $(DLL_SRC:.c=.obj)
-X2P_OBJ                = $(X2P_SRC:.c=.obj)
-
-PERLDLL_OBJ    = $(CORE_OBJ)
-PERLEXE_OBJ    = perlmain$(o)
-
-PERLDLL_OBJ    = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-#PERLEXE_OBJ   = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-
-!IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ    = setargv$(o)
-!ENDIF
-
-DYNALOADER     = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET         = $(EXTDIR)\Socket\Socket
-FCNTL          = $(EXTDIR)\Fcntl\Fcntl
-OPCODE         = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE      = $(EXTDIR)\SDBM_File\SDBM_File
-IO             = $(EXTDIR)\IO\IO
-POSIX          = $(EXTDIR)\POSIX\POSIX
-ATTRS          = $(EXTDIR)\attrs\attrs
-THREAD         = $(EXTDIR)\Thread\Thread
-B              = $(EXTDIR)\B\B
-RE             = $(EXTDIR)\re\re
-DUMPER         = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO          = $(EXTDIR)\Errno\Errno
-PEEK           = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER     = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF          = $(EXTDIR)\Devel\DProf\DProf
-GLOB           = $(EXTDIR)\File\Glob\Glob
-HOSTNAME       = $(EXTDIR)\Sys\Hostname\Hostname
-STORABLE       = $(EXTDIR)\Storable\Storable
-FILTER         = $(EXTDIR)\Filter\Util\Call\Call
-ENCODE         = $(EXTDIR)\Encode\Encode
-MD5            = $(EXTDIR)\Digest\MD5\MD5
-PERLIOSCALAR   = $(EXTDIR)\PerlIO\Scalar\Scalar
-MIMEBASE64     = $(EXTDIR)\MIME\Base64\Base64
-TIMEHIRES      = $(EXTDIR)\Time\HiRes\HiRes
-TIMEPIECE      = $(EXTDIR)\Time\Piece\Piece
-CWD            = $(EXTDIR)\Cwd\Cwd
-LISTUTIL       = $(EXTDIR)\List\Util\Util
-PERLIOVIA      = $(EXTDIR)\PerlIO\Via\Via
-XSTYPEMAP      = $(EXTDIR)\XS\Typemap\Typemap
-
-SOCKET_DLL     = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL      = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL     = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL  = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL         = $(AUTODIR)\IO\IO.dll
-POSIX_DLL      = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL      = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL     = $(AUTODIR)\Thread\Thread.dll
-B_DLL          = $(AUTODIR)\B\B.dll
-DUMPER_DLL     = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL       = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL         = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL      = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL       = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL   = $(AUTODIR)\Sys\Hostname\Hostname.dll
-STORABLE_DLL   = $(AUTODIR)\Storable\Storable.dll
-FILTER_DLL     = $(AUTODIR)\Filter\Util\Call\Call.dll
-ENCODE_DLL     = $(AUTODIR)\Encode\Encode.dll
-MD5_DLL                = $(AUTODIR)\Digest\MD5\MD5.dll
-PERLIOSCALAR_DLL= $(AUTODIR)\PerlIO\Scalar\Scalar.dll
-MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
-TIMEHIRES_DLL  = $(AUTODIR)\Time\HiRes\HiRes.dll
-TIMEPIECE_DLL  = $(AUTODIR)\Time\Piece\Piece.dll
-CWD_DLL                = $(AUTODIR)\Cwd\Cwd.dll
-LISTUTIL_DLL   = $(AUTODIR)\List\Util\Util.dll
-PERLIOVIA_DLL  = $(AUTODIR)\PerlIO\Via\Via.dll
-XSTYPEMAP_DLL  = $(AUTODIR)\XS\Typemap\Typemap.dll
-
-EXTENSION_C    =               \
-               $(SOCKET).c     \
-               $(FCNTL).c      \
-               $(OPCODE).c     \
-               $(SDBM_FILE).c  \
-               $(IO).c         \
-               $(POSIX).c      \
-               $(ATTRS).c      \
-               $(THREAD).c     \
-               $(RE).c         \
-               $(DUMPER).c     \
-               $(PEEK).c       \
-               $(B).c          \
-               $(BYTELOADER).c \
-               $(DPROF).c      \
-               $(GLOB).c       \
-               $(HOSTNAME).c   \
-               $(STORABLE).c   \
-               $(FILTER).c     \
-               $(ENCODE).c     \
-               $(MD5).c        \
-               $(PERLIOSCALAR).c       \
-               $(MIMEBASE64).c \
-               $(TIMEHIRES).c  \
-               $(TIMEPIECE).c  \
-               $(CWD).c        \
-               $(LISTUTIL).c   \
-               $(PERLIOVIA).c  \
-               $(XSTYPEMAP).c
-
-EXTENSION_DLL  =               \
-               $(SOCKET_DLL)   \
-               $(FCNTL_DLL)    \
-               $(OPCODE_DLL)   \
-               $(SDBM_FILE_DLL)\
-               $(IO_DLL)       \
-               $(POSIX_DLL)    \
-               $(ATTRS_DLL)    \
-               $(DUMPER_DLL)   \
-               $(PEEK_DLL)     \
-               $(B_DLL)        \
-               $(RE_DLL)       \
-               $(THREAD_DLL)   \
-               $(BYTELOADER_DLL)       \
-               $(DPROF_DLL)    \
-               $(GLOB_DLL)     \
-               $(HOSTNAME_DLL) \
-               $(STORABLE_DLL) \
-               $(FILTER_DLL)   \
-               $(ENCODE_DLL)   \
-               $(MD5_DLL)      \
-               $(PERLIOSCALAR_DLL) \
-               $(MIMEBASE64_DLL) \
-               $(TIMEHIRES_DLL)  \
-               $(TIMEPIECE_DLL)  \
-               $(CWD_DLL)      \
-               $(LISTUTIL_DLL) \
-               $(PERLIOVIA_DLL)        \
-               $(XSTYPEMAP_DLL)
-
-POD2HTML       = $(PODDIR)\pod2html
-POD2MAN                = $(PODDIR)\pod2man
-POD2LATEX      = $(PODDIR)\pod2latex
-POD2TEXT       = $(PODDIR)\pod2text
-
-CFG_VARS       =                                       \
-               "INST_DRV=$(INST_DRV)"                  \
-               "INST_TOP=$(INST_TOP)"                  \
-               "INST_VER=$(INST_VER)"                  \
-               "INST_ARCH=$(INST_ARCH)"                \
-               "archname=$(ARCHNAME)"                  \
-               "cc=$(CC)"                              \
-               "ld=$(LINK32)"                          \
-               "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"       \
-               "cf_email=$(EMAIL)"                     \
-               "d_crypt=$(D_CRYPT)"                    \
-               "d_mymalloc=$(PERL_MALLOC)"             \
-               "libs=$(LIBFILES)"                      \
-               "incpath=$(CCINCDIR:"=\")"              \
-               "libperl=$(PERLIMPLIB:..\=)"            \
-               "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"  \
-               "libc=$(LIBC)"                          \
-               "make=$(MAKE_BARE)"                             \
-               "use5005threads=$(USE_5005THREADS)"     \
-               "useithreads=$(USE_ITHREADS)"           \
-               "usethreads=$(USE_5005THREADS)"         \
-               "usemultiplicity=$(USE_MULTI)"          \
-               "useperlio=$(USE_PERLIO)"               \
-               "LINK_FLAGS=$(LINK_FLAGS:"=\")"         \
-               "optimize=$(OPTIMIZE:"=\")"
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
-       $(X2P) Extensions
-       @echo   Everything is up to date. '$(MAKE_BARE) test' to run test suite.
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#------------------------------------------------------------
-
-$(GLOBEXE) : perlglob$(o)
-       $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
-           perlglob$(o) setargv$(o)
-
-perlglob$(o)  : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
-       copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL)
-       -del /f config.h
-       copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
-       $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
-       perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
-       cd ..
-       -del /f perl.exe
-       perl configpm
-       cd win32
-       -del /f $(CFGH_TMPL)
-       -mkdir $(COREDIR)
-       -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-       rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-       cd ..
-       miniperl configpm
-       cd win32
-       if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
-       $(XCOPY) ..\*.h $(COREDIR)\*.*
-       $(XCOPY) *.h $(COREDIR)\*.*
-       $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-       $(RCOPY) include $(COREDIR)\*.*
-       -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-       if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
-       $(LINK32) -subsystem:console -out:$@ @<<
-       $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
-<<
-
-$(MINIDIR) :
-       if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
-       $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
-       $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-perllib$(o)    : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-       $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-!ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ)    : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ)   : $(CORE_H)
-$(CORE_OBJ)    : $(CORE_H)
-$(DLL_OBJ)     : $(CORE_H)
-$(X2P_OBJ)     : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-       $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
-           CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-       $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
-               $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
-<<
-       $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
-       cd ..
-       miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-       cd win32
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
-       $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
-       $(MINIPERL) ..\x2p\find2perl.PL
-       $(MINIPERL) ..\x2p\s2p.PL
-       $(LINK32) -subsystem:console -out:$@ @<<
-               $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
-<<
-
-perlmain.c : runperl.c
-       copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
-       $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-       $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
-           $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-       copy $(PERLEXE) $(WPERLEXE)
-       $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
-       copy splittree.pl ..
-       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-       if not exist $(AUTODIR) mkdir $(AUTODIR)
-       cd $(EXTDIR)\$(*B)
-       ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
-       ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
-       cd ..\..\win32
-       $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-       $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-       cd $(EXTDIR)\$(*B)
-       $(XSUBPP) dl_win32.xs > $(*B).c
-       cd ..\..\win32
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-       copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
-       $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-
-Extensions_clean: 
-       -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-doc: $(PERLEXE)
-       $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-           --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
-           --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
-       cd ..\utils
-       $(MAKE) PERL=$(MINIPERL)
-       cd ..\pod
-       copy ..\README.aix      .\perlaix.pod
-       copy ..\README.amiga    .\perlamiga.pod
-       copy ..\README.apollo   .\perlapollo.pod
-       copy ..\README.beos     .\perlbeos.pod
-       copy ..\README.bs2000   .\perlbs2000.pod
-       copy ..\README.cygwin   .\perlcygwin.pod
-       copy ..\README.dgux     .\perldgux.pod
-       copy ..\README.dos      .\perldos.pod
-       copy ..\README.epoc     .\perlepoc.pod
-       copy ..\README.hurd     .\perlhurd.pod
-       copy ..\README.hpux     .\perlhpux.pod
-       copy ..\README.machten  .\perlmachten.pod
-       copy ..\README.macos    .\perlmacos.pod
-       copy ..\README.mint     .\perlmint.pod
-       copy ..\README.mpeix    .\perlmpeix.pod
-       copy ..\README.netware  .\perlnetware.pod
-       copy ..\README.os2      .\perlos2.pod
-       copy ..\README.os390    .\perlos390.pod
-       copy ..\README.plan9    .\perlplan9.pod
-       copy ..\README.qnx      .\perlqnx.pod
-       copy ..\README.solaris  .\perlsolaris.pod
-       copy ..\README.tru64    .\perltru64.pod
-       copy ..\README.vmesa    .\perlvmesa.pod
-       copy ..\vms\perlvms.pod .\perlvms.pod
-       copy ..\README.vos      .\perlvos.pod
-       copy ..\README.win32    .\perlwin32.pod
-       $(MAKE) -f ..\win32\pod.mak converters
-       cd ..\lib
-       $(PERLEXE) lib_pm.PL
-       cd ..\win32
-       $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
-       -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
-               $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-       -del /f *.def *.map
-       -del /f $(EXTENSION_DLL)
-       -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-       -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-       -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-       -del /f $(LIBDIR)\XSLoader.pm
-       -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-       -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-       -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-       -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-       -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-       -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-       -del /f $(LIBDIR)\File\Glob.pm
-       -del /f $(LIBDIR)\Storable.pm
-       -del /f $(LIBDIR)\Filter\Util\Call.pm
-       -del /f $(LIBDIR)\Digest\MD5.pm
-       -del /f $(LIBDIR)\PerlIO\Scalar.pm
-       -del /f $(LIBDIR)\PerlIO\Via.pm
-       -del /f $(LIBDIR)\MIME\Base64.pm
-       -del /f $(LIBDIR)\MIME\QuotedPrint.pm
-       -del /f $(LIBDIR)\List\Util.pm
-       -del /f $(LIBDIR)\Scalar\Util.pm
-       -del /f $(LIBDIR)\Time\HiRes.pm
-       -del /f $(LIBDIR)\Time\Piece.pm
-       -del /f $(LIBDIR)\XS\Typemap.pm
-       -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
-       -rmdir /s $(LIBDIR)\IO
-       -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
-       -rmdir /s $(LIBDIR)\Thread
-       -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-       -rmdir /s $(LIBDIR)\B
-       -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-       -rmdir /s $(LIBDIR)\Data
-       -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
-       -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
-       -rmdir /s $(LIBDIR)\Digest
-       -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-       -rmdir /s $(LIBDIR)\MIME
-       -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
-       -rmdir /s $(LIBDIR)\List
-       -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-       -rmdir /s $(LIBDIR)\Scalar
-       -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-       -rmdir /s $(LIBDIR)\XS
-       cd $(PODDIR)
-       -del /f *.html *.bat checkpods \
-           perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
-           perlbs2000.pod perlcygwin.pod perldgux.pod \
-           perldos.pod perlepoc.pod perlhurd.pod \
-           perlhpux.pod perlmachten.pod \
-           perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
-           perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
-           perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
-           perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
-           podchecker podselect
-       cd ..\utils
-       -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
-       -del /f *.bat
-       cd ..\win32
-       cd ..\x2p
-       -del /f find2perl s2p
-       -del /f *.bat
-       cd ..\win32
-       -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-       -del /f $(CONFIGPM)
-       -del /f bin\*.bat
-       cd $(EXTDIR)
-       -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
-       cd ..\win32
-       -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-       -rmdir /s $(AUTODIR)
-       -if exist $(COREDIR) rmdir /s /q $(COREDIR)
-       -rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : utils
-       $(PERLEXE) ..\installperl
-       if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
-       $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
-       $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
-       $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
-       copy splittree.pl ..
-       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-       $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
-       $(XCOPY) $(MINIPERL) ..\t\perl.exe
-       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-       attrib -r ..\t\*.*
-       copy test ..\t
-       cd ..\t
-       $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-       cd ..\win32
-
-test-prep : all utils
-       $(XCOPY) $(PERLEXE) ..\t\$(NULL)
-       $(XCOPY) $(PERLDLL) ..\t\$(NULL)
-       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-
-test : test-prep
-       cd ..\t
-       $(PERLEXE) -I..\lib harness
-       cd ..\win32
-
-test-notty : test-prep
-       set PERL_SKIP_TTY_TEST=1
-       cd ..\t
-       $(PERLEXE) -I..\lib harness
-       cd ..\win32
-
-test-wide : test-prep
-       set HARNESS_PERL_SWITCHES=-C
-       cd ..\t
-       $(PERLEXE) -I..\lib harness
-       cd ..\win32
-
-test-wide-notty : test-prep
-       set PERL_SKIP_TTY_TEST=1
-       set HARNESS_PERL_SWITCHES=-C
-       cd ..\t
-       $(PERLEXE) -I..\lib harness
-       cd ..\win32
-
-clean : Extensions_clean
-       -@$(DEL) miniperlmain$(o)
-       -@$(DEL) $(MINIPERL)
-       -@$(DEL) perlglob$(o)
-       -@$(DEL) perlmain$(o)
-       -@$(DEL) config.w32
-       -@$(DEL) config.h
-       -@$(DEL) $(GLOBEXE)
-       -@$(DEL) $(PERLEXE)
-       -@$(DEL) $(WPERLEXE)
-       -@$(DEL) $(PERLDLL)
-       -@$(DEL) $(CORE_OBJ)
-       -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-       -rmdir /s $(MINIDIR)
-       -@$(DEL) $(WIN32_OBJ)
-       -@$(DEL) $(DLL_OBJ)
-       -@$(DEL) $(X2P_OBJ)
-       -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
-       -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
-       -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
-       -@$(DEL) *.ilk
-       -@$(DEL) *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "nmake nok" instead.
-ok: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#\r
+# Makefile to build perl on Windows NT using Microsoft NMAKE.\r
+# Supported compilers:\r
+#      Visual C++ 5.x (possibly other versions)\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl57.dll).  Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration.  Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "nmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV       = c:\r
+INST_TOP       = $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location.  Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to.  If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+#INST_VER = \5.7.1\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components.  This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files.  Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location.  Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+#INST_ARCH = \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters.  This is need for fork()\r
+# emulation.\r
+#\r
+USE_MULTI = define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation.  This needs\r
+# USE_MULTI as well.\r
+#\r
+USE_ITHREADS = define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl.  This needs USE_MULTI above.  This is also needed to\r
+# get fork().\r
+#\r
+USE_IMP_SYS = define\r
+\r
+#\r
+# uncomment to enable the experimental PerlIO I/O subsystem.\r
+USE_PERLIO     = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities.  This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS       = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_MULTI instead).\r
+#\r
+# uncomment next line if you want to use the PERL_OBJECT build option.\r
+# DO NOT ENABLE unless you have legacy code that relies on the C++\r
+# CPerlObj class that was available in 5.005.  This cannot be enabled\r
+# if you ask for USE_5005THREADS above.\r
+#\r
+#USE_OBJECT    = define\r
+\r
+#\r
+# uncomment one of the following lines if you are using either\r
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)\r
+#\r
+#CCTYPE                = MSVC20\r
+#CCTYPE                = MSVC60\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+#\r
+#CFG           = Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT   = define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful.  This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV   = define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32).  File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC     = fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB     = fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it.  Be prepared to recompile all\r
+# extensions if you change the default.  Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC   = define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME                = f:\msvc20\r
+CCHOME         = $(MSVCDIR)\r
+CCINCDIR       = $(CCHOME)\include\r
+CCLIBDIR       = $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution.  You most\r
+# probably just want to build modules that won't compile with\r
+#         perl Makefile.PL POLLUTE=1\r
+# instead of enabling this.  Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT      = $(BUILDOPT) -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled.  Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT      = $(BUILDOPT) -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled.  Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT      = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS   =\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL         =\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT                = undef\r
+!ELSE\r
+D_CRYPT                = define\r
+CRYPT_FLAG     = -DHAVE_DES_FCRYPT\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+PERL_MALLOC    = undef\r
+USE_5005THREADS        = undef\r
+USE_MULTI      = undef\r
+USE_IMP_SYS    = define\r
+!ENDIF\r
+\r
+!IF "$(PERL_MALLOC)" == ""\r
+PERL_MALLOC    = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == ""\r
+USE_5005THREADS        = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS   = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC    = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)" == ""\r
+USE_MULTI      = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == ""\r
+USE_OBJECT     = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == ""\r
+USE_ITHREADS   = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" == ""\r
+USE_IMP_SYS    = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLIO)" == ""\r
+USE_PERLIO     = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" == ""\r
+USE_PERLCRT    = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
+USE_MULTI      = define\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
+USE_MULTI      = define\r
+USE_5005THREADS        = undef\r
+!ENDIF\r
+\r
+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
+BUILDOPT       = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT\r
+!ENDIF\r
+\r
+!IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT       = $(BUILDOPT) -DPERL_IMPLICIT_SYS\r
+!ENDIF\r
+\r
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""\r
+PROCESSOR_ARCHITECTURE = x86\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
+!ELSE\r
+!IF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+!ELSE\r
+!IF "$(USE_MULTI)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+!ELSE\r
+!IF "$(USE_PERLIO)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
+!ELSE\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+!ENDIF\r
+!ENDIF\r
+!ENDIF\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLIO)" == "define"\r
+BUILDOPT       = $(BUILDOPT) -DUSE_PERLIO\r
+!ENDIF\r
+\r
+!IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME       = $(ARCHNAME)-thread\r
+!ENDIF\r
+\r
+# Visual Studio 98 specific\r
+!IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand.  Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD      = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
+!ENDIF\r
+\r
+ARCHDIR                = ..\lib\$(ARCHNAME)\r
+COREDIR                = ..\lib\CORE\r
+AUTODIR                = ..\lib\auto\r
+LIBDIR         = ..\lib\r
+EXTDIR         = ..\ext\r
+PODDIR         = ..\pod\r
+EXTUTILSDIR    = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT    = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN       = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB       = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB   = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR   = $(INST_ARCHLIB)\CORE\r
+INST_POD       = $(INST_LIB)\pod\r
+INST_HTML      = $(INST_TOP)$(INST_VER)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+CC             = cl\r
+LINK32         = link\r
+LIB32          = $(LINK32) -lib\r
+RSC            = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES       = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS      = -Fpc:\temp\vcmoduls.pch -YX\r
+DEFINES                = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS                = -DPERLDLL -DPERL_CORE\r
+SUBSYS         = console\r
+CXX_FLAG       = -TP -GX\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+LIBC   = msvcrt.lib\r
+!ELSE\r
+LIBC   = PerlCRT.lib\r
+!ENDIF\r
+\r
+PERLEXE_RES    =\r
+PERLDLL_RES    =\r
+\r
+!IF  "$(CFG)" == "Debug"\r
+!  IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE       = -Od -MD -Z7 -DDEBUGGING\r
+!  ELSE\r
+OPTIMIZE       = -Od -MD -Zi -DDEBUGGING\r
+!  ENDIF\r
+LINK_DBG       = -debug -pdb:none\r
+!ELSE\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE      = -O2 -MD -DNDEBUG\r
+OPTIMIZE       = -O1 -MD -DNDEBUG\r
+LINK_DBG       = -release\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" == "define"\r
+OPTIMIZE       = $(OPTIMIZE) $(CXX_FLAG)\r
+BUILDOPT       = $(BUILDOPT) -DPERL_OBJECT\r
+!ENDIF\r
+\r
+!IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT       = $(BUILDOPT) -DPERL_MSVCRT_READFIX\r
+!ENDIF\r
+\r
+LIBBASEFILES   = $(CRYPT_LIB) \\r
+               oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+               comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+               netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+               version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES       = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS         = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+               $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS     = -nologo -nodefaultlib $(LINK_DBG) \\r
+               -libpath:"$(INST_COREDIR)" \\r
+               -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG    = -Fo\r
+EXEOUT_FLAG    = -Fe\r
+\r
+CFLAGS_O       = $(CFLAGS) $(BUILDOPT)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o = .obj\r
+\r
+#\r
+# Rules\r
+#\r
+\r
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res\r
+\r
+.c$(o):\r
+       $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.y.c:\r
+       $(NOOP)\r
+\r
+$(o).dll:\r
+       $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+           -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
+\r
+.rc.res:\r
+       $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+\r
+# makedef.pl must be updated if this changes, and this should normally\r
+# only change when there is an incompatible revision of the public API.\r
+# XXX so why did we change it from perl56 to perl57?\r
+PERLIMPLIB     = ..\perl57.lib\r
+PERLDLL                = ..\perl57.dll\r
+\r
+MINIPERL       = ..\miniperl.exe\r
+MINIDIR                = .\mini\r
+PERLEXE                = ..\perl.exe\r
+WPERLEXE       = ..\wperl.exe\r
+GLOBEXE                = ..\perlglob.exe\r
+CONFIGPM       = ..\lib\Config.pm\r
+MINIMOD                = ..\lib\ExtUtils\Miniperl.pm\r
+X2P            = ..\x2p\a2p.exe\r
+\r
+# Nominate a target which causes extensions to be re-built\r
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
+# on and really only the interface - i.e. the .def file used to export symbols\r
+# from the .dll\r
+PERLDEP                = perldll.def\r
+\r
+PL2BAT         = bin\pl2bat.pl\r
+GLOBBAT                = bin\perlglob.bat\r
+\r
+UTILS          =                       \\r
+               ..\utils\h2ph           \\r
+               ..\utils\splain         \\r
+               ..\utils\dprofpp        \\r
+               ..\utils\perlbug        \\r
+               ..\utils\pl2pm          \\r
+               ..\utils\c2ph           \\r
+               ..\utils\h2xs           \\r
+               ..\utils\perldoc        \\r
+               ..\utils\perlcc         \\r
+               ..\pod\checkpods        \\r
+               ..\pod\pod2html         \\r
+               ..\pod\pod2latex        \\r
+               ..\pod\pod2man          \\r
+               ..\pod\pod2text         \\r
+               ..\pod\pod2usage        \\r
+               ..\pod\podchecker       \\r
+               ..\pod\podselect        \\r
+               ..\x2p\find2perl        \\r
+               ..\x2p\s2p              \\r
+               bin\exetype.pl          \\r
+               bin\runperl.pl          \\r
+               bin\pl2bat.pl           \\r
+               bin\perlglob.pl         \\r
+               bin\search.pl\r
+\r
+MAKE           = nmake -nologo\r
+MAKE_BARE      = nmake\r
+\r
+CFGSH_TMPL     = config.vc\r
+CFGH_TMPL      = config_H.vc\r
+\r
+XCOPY          = xcopy /f /r /i /d\r
+RCOPY          = xcopy /f /r /i /e /d\r
+NOOP           = @echo\r
+NULL           =\r
+\r
+DEL            = del\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP         = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+               -C++ -prototypes\r
+\r
+MICROCORE_SRC  =               \\r
+               ..\av.c         \\r
+               ..\deb.c        \\r
+               ..\doio.c       \\r
+               ..\doop.c       \\r
+               ..\dump.c       \\r
+               ..\globals.c    \\r
+               ..\gv.c         \\r
+               ..\hv.c         \\r
+               ..\locale.c     \\r
+               ..\mg.c         \\r
+               ..\numeric.c    \\r
+               ..\op.c         \\r
+               ..\perl.c       \\r
+               ..\perlapi.c    \\r
+               ..\perly.c      \\r
+               ..\pp.c         \\r
+               ..\pp_ctl.c     \\r
+               ..\pp_hot.c     \\r
+               ..\pp_pack.c    \\r
+               ..\pp_sys.c     \\r
+               ..\regcomp.c    \\r
+               ..\regexec.c    \\r
+               ..\run.c        \\r
+               ..\scope.c      \\r
+               ..\sv.c         \\r
+               ..\taint.c      \\r
+               ..\toke.c       \\r
+               ..\universal.c  \\r
+               ..\utf8.c       \\r
+               ..\util.c       \\r
+               ..\xsutils.c\r
+\r
+EXTRACORE_SRC  = $(EXTRACORE_SRC) perllib.c\r
+\r
+!IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC  = $(EXTRACORE_SRC) ..\malloc.c\r
+!ENDIF\r
+\r
+!IF "$(USE_OBJECT)" != "define"\r
+EXTRACORE_SRC  = $(EXTRACORE_SRC) ..\perlio.c\r
+!ENDIF\r
+\r
+WIN32_SRC      =               \\r
+               .\win32.c       \\r
+               .\win32io.c     \\r
+               .\win32sck.c    \\r
+               .\win32thread.c\r
+\r
+!IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC      = $(WIN32_SRC) .\$(CRYPT_SRC)\r
+!ENDIF\r
+\r
+DLL_SRC                = $(DYNALOADER).c\r
+\r
+X2P_SRC                =               \\r
+               ..\x2p\a2p.c    \\r
+               ..\x2p\hash.c   \\r
+               ..\x2p\str.c    \\r
+               ..\x2p\util.c   \\r
+               ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H   =               \\r
+               ..\av.h         \\r
+               ..\cop.h        \\r
+               ..\cv.h         \\r
+               ..\dosish.h     \\r
+               ..\embed.h      \\r
+               ..\form.h       \\r
+               ..\gv.h         \\r
+               ..\handy.h      \\r
+               ..\hv.h         \\r
+               ..\iperlsys.h   \\r
+               ..\mg.h         \\r
+               ..\nostdio.h    \\r
+               ..\op.h         \\r
+               ..\opcode.h     \\r
+               ..\perl.h       \\r
+               ..\perlapi.h    \\r
+               ..\perlsdio.h   \\r
+               ..\perlsfio.h   \\r
+               ..\perly.h      \\r
+               ..\pp.h         \\r
+               ..\proto.h      \\r
+               ..\regexp.h     \\r
+               ..\scope.h      \\r
+               ..\sv.h         \\r
+               ..\thread.h     \\r
+               ..\unixish.h    \\r
+               ..\utf8.h       \\r
+               ..\util.h       \\r
+               ..\warnings.h   \\r
+               ..\XSUB.h       \\r
+               ..\EXTERN.h     \\r
+               ..\perlvars.h   \\r
+               ..\intrpvar.h   \\r
+               ..\thrdvar.h    \\r
+               .\include\dirent.h      \\r
+               .\include\netdb.h       \\r
+               .\include\sys\socket.h  \\r
+               .\win32.h\r
+\r
+CORE_H         = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ  = $(MICROCORE_SRC:.c=.obj)\r
+CORE_OBJ       = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)\r
+WIN32_OBJ      = $(WIN32_SRC:.c=.obj)\r
+MINICORE_OBJ   = $(MICROCORE_OBJ:..\=.\mini\)  \\r
+                 $(MINIDIR)\miniperlmain$(o)   \\r
+                 $(MINIDIR)\perlio$(o)\r
+MINIWIN32_OBJ  = $(WIN32_OBJ:.\=.\mini\)\r
+MINI_OBJ       = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ                = $(DLL_SRC:.c=.obj)\r
+X2P_OBJ                = $(X2P_SRC:.c=.obj)\r
+\r
+PERLDLL_OBJ    = $(CORE_OBJ)\r
+PERLEXE_OBJ    = perlmain$(o)\r
+\r
+PERLDLL_OBJ    = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+#PERLEXE_OBJ   = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+!IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ    = setargv$(o)\r
+!ENDIF\r
+\r
+DYNALOADER     = $(EXTDIR)\DynaLoader\DynaLoader\r
+SOCKET         = $(EXTDIR)\Socket\Socket\r
+FCNTL          = $(EXTDIR)\Fcntl\Fcntl\r
+OPCODE         = $(EXTDIR)\Opcode\Opcode\r
+SDBM_FILE      = $(EXTDIR)\SDBM_File\SDBM_File\r
+IO             = $(EXTDIR)\IO\IO\r
+POSIX          = $(EXTDIR)\POSIX\POSIX\r
+ATTRS          = $(EXTDIR)\attrs\attrs\r
+THREAD         = $(EXTDIR)\Thread\Thread\r
+B              = $(EXTDIR)\B\B\r
+RE             = $(EXTDIR)\re\re\r
+DUMPER         = $(EXTDIR)\Data\Dumper\Dumper\r
+ERRNO          = $(EXTDIR)\Errno\Errno\r
+PEEK           = $(EXTDIR)\Devel\Peek\Peek\r
+BYTELOADER     = $(EXTDIR)\ByteLoader\ByteLoader\r
+DPROF          = $(EXTDIR)\Devel\DProf\DProf\r
+GLOB           = $(EXTDIR)\File\Glob\Glob\r
+HOSTNAME       = $(EXTDIR)\Sys\Hostname\Hostname\r
+STORABLE       = $(EXTDIR)\Storable\Storable\r
+FILTER         = $(EXTDIR)\Filter\Util\Call\Call\r
+ENCODE         = $(EXTDIR)\Encode\Encode\r
+MD5            = $(EXTDIR)\Digest\MD5\MD5\r
+PERLIOSCALAR   = $(EXTDIR)\PerlIO\Scalar\Scalar\r
+MIMEBASE64     = $(EXTDIR)\MIME\Base64\Base64\r
+TIMEHIRES      = $(EXTDIR)\Time\HiRes\HiRes\r
+TIMEPIECE      = $(EXTDIR)\Time\Piece\Piece\r
+CWD            = $(EXTDIR)\Cwd\Cwd\r
+LISTUTIL       = $(EXTDIR)\List\Util\Util\r
+PERLIOVIA      = $(EXTDIR)\PerlIO\Via\Via\r
+XSTYPEMAP      = $(EXTDIR)\XS\Typemap\Typemap\r
+\r
+SOCKET_DLL     = $(AUTODIR)\Socket\Socket.dll\r
+FCNTL_DLL      = $(AUTODIR)\Fcntl\Fcntl.dll\r
+OPCODE_DLL     = $(AUTODIR)\Opcode\Opcode.dll\r
+SDBM_FILE_DLL  = $(AUTODIR)\SDBM_File\SDBM_File.dll\r
+IO_DLL         = $(AUTODIR)\IO\IO.dll\r
+POSIX_DLL      = $(AUTODIR)\POSIX\POSIX.dll\r
+ATTRS_DLL      = $(AUTODIR)\attrs\attrs.dll\r
+THREAD_DLL     = $(AUTODIR)\Thread\Thread.dll\r
+B_DLL          = $(AUTODIR)\B\B.dll\r
+DUMPER_DLL     = $(AUTODIR)\Data\Dumper\Dumper.dll\r
+PEEK_DLL       = $(AUTODIR)\Devel\Peek\Peek.dll\r
+RE_DLL         = $(AUTODIR)\re\re.dll\r
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll\r
+DPROF_DLL      = $(AUTODIR)\Devel\DProf\DProf.dll\r
+GLOB_DLL       = $(AUTODIR)\File\Glob\Glob.dll\r
+HOSTNAME_DLL   = $(AUTODIR)\Sys\Hostname\Hostname.dll\r
+STORABLE_DLL   = $(AUTODIR)\Storable\Storable.dll\r
+FILTER_DLL     = $(AUTODIR)\Filter\Util\Call\Call.dll\r
+ENCODE_DLL     = $(AUTODIR)\Encode\Encode.dll\r
+MD5_DLL                = $(AUTODIR)\Digest\MD5\MD5.dll\r
+PERLIOSCALAR_DLL= $(AUTODIR)\PerlIO\Scalar\Scalar.dll\r
+MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll\r
+TIMEHIRES_DLL  = $(AUTODIR)\Time\HiRes\HiRes.dll\r
+TIMEPIECE_DLL  = $(AUTODIR)\Time\Piece\Piece.dll\r
+CWD_DLL                = $(AUTODIR)\Cwd\Cwd.dll\r
+LISTUTIL_DLL   = $(AUTODIR)\List\Util\Util.dll\r
+PERLIOVIA_DLL  = $(AUTODIR)\PerlIO\Via\Via.dll\r
+XSTYPEMAP_DLL  = $(AUTODIR)\XS\Typemap\Typemap.dll\r
+\r
+EXTENSION_C    =               \\r
+               $(SOCKET).c     \\r
+               $(FCNTL).c      \\r
+               $(OPCODE).c     \\r
+               $(SDBM_FILE).c  \\r
+               $(IO).c         \\r
+               $(POSIX).c      \\r
+               $(ATTRS).c      \\r
+               $(THREAD).c     \\r
+               $(RE).c         \\r
+               $(DUMPER).c     \\r
+               $(PEEK).c       \\r
+               $(B).c          \\r
+               $(BYTELOADER).c \\r
+               $(DPROF).c      \\r
+               $(GLOB).c       \\r
+               $(HOSTNAME).c   \\r
+               $(STORABLE).c   \\r
+               $(FILTER).c     \\r
+               $(ENCODE).c     \\r
+               $(MD5).c        \\r
+               $(PERLIOSCALAR).c       \\r
+               $(MIMEBASE64).c \\r
+               $(TIMEHIRES).c  \\r
+               $(TIMEPIECE).c  \\r
+               $(CWD).c        \\r
+               $(LISTUTIL).c   \\r
+               $(PERLIOVIA).c  \\r
+               $(XSTYPEMAP).c\r
+\r
+EXTENSION_DLL  =               \\r
+               $(SOCKET_DLL)   \\r
+               $(FCNTL_DLL)    \\r
+               $(OPCODE_DLL)   \\r
+               $(SDBM_FILE_DLL)\\r
+               $(IO_DLL)       \\r
+               $(POSIX_DLL)    \\r
+               $(ATTRS_DLL)    \\r
+               $(DUMPER_DLL)   \\r
+               $(PEEK_DLL)     \\r
+               $(B_DLL)        \\r
+               $(RE_DLL)       \\r
+               $(THREAD_DLL)   \\r
+               $(BYTELOADER_DLL)       \\r
+               $(DPROF_DLL)    \\r
+               $(GLOB_DLL)     \\r
+               $(HOSTNAME_DLL) \\r
+               $(STORABLE_DLL) \\r
+               $(FILTER_DLL)   \\r
+               $(ENCODE_DLL)   \\r
+               $(MD5_DLL)      \\r
+               $(PERLIOSCALAR_DLL) \\r
+               $(MIMEBASE64_DLL) \\r
+               $(TIMEHIRES_DLL)  \\r
+               $(TIMEPIECE_DLL)  \\r
+               $(CWD_DLL)      \\r
+               $(LISTUTIL_DLL) \\r
+               $(PERLIOVIA_DLL)        \\r
+               $(XSTYPEMAP_DLL)\r
+\r
+POD2HTML       = $(PODDIR)\pod2html\r
+POD2MAN                = $(PODDIR)\pod2man\r
+POD2LATEX      = $(PODDIR)\pod2latex\r
+POD2TEXT       = $(PODDIR)\pod2text\r
+\r
+CFG_VARS       =                                       \\r
+               "INST_DRV=$(INST_DRV)"                  \\r
+               "INST_TOP=$(INST_TOP)"                  \\r
+               "INST_VER=$(INST_VER)"                  \\r
+               "INST_ARCH=$(INST_ARCH)"                \\r
+               "archname=$(ARCHNAME)"                  \\r
+               "cc=$(CC)"                              \\r
+               "ld=$(LINK32)"                          \\r
+               "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"       \\r
+               "cf_email=$(EMAIL)"                     \\r
+               "d_crypt=$(D_CRYPT)"                    \\r
+               "d_mymalloc=$(PERL_MALLOC)"             \\r
+               "libs=$(LIBFILES)"                      \\r
+               "incpath=$(CCINCDIR:"=\")"              \\r
+               "libperl=$(PERLIMPLIB:..\=)"            \\r
+               "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"  \\r
+               "libc=$(LIBC)"                          \\r
+               "make=$(MAKE_BARE)"                             \\r
+               "use5005threads=$(USE_5005THREADS)"     \\r
+               "useithreads=$(USE_ITHREADS)"           \\r
+               "usethreads=$(USE_5005THREADS)"         \\r
+               "usemultiplicity=$(USE_MULTI)"          \\r
+               "useperlio=$(USE_PERLIO)"               \\r
+               "LINK_FLAGS=$(LINK_FLAGS:"=\")"         \\r
+               "optimize=$(OPTIMIZE:"=\")"\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
+       $(X2P) Extensions\r
+       @echo   Everything is up to date. '$(MAKE_BARE) test' to run test suite.\r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#------------------------------------------------------------\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+       $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+           perlglob$(o) setargv$(o)\r
+\r
+perlglob$(o)  : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+       copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL)\r
+       -del /f config.h\r
+       copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL\r
+       $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+       perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh\r
+       cd ..\r
+       -del /f perl.exe\r
+       perl configpm\r
+       cd win32\r
+       -del /f $(CFGH_TMPL)\r
+       -mkdir $(COREDIR)\r
+       -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+       rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+       cd ..\r
+       miniperl configpm\r
+       cd win32\r
+       if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+       $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+       $(XCOPY) *.h $(COREDIR)\*.*\r
+       $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+       $(RCOPY) include $(COREDIR)\*.*\r
+       -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+       if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)\r
+       $(LINK32) -subsystem:console -out:$@ @<<\r
+       $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)\r
+<<\r
+\r
+$(MINIDIR) :\r
+       if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+       $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+       $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
+perllib$(o)    : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+       $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+!ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ)    : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ)   : $(CORE_H)\r
+$(CORE_OBJ)    : $(CORE_H)\r
+$(DLL_OBJ)     : $(CORE_H)\r
+$(X2P_OBJ)     : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+       $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \\r
+           CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+       $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<\r
+               $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+<<\r
+       $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+       cd ..\r
+       miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+       cd win32\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+       $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+       $(MINIPERL) ..\x2p\find2perl.PL\r
+       $(MINIPERL) ..\x2p\s2p.PL\r
+       $(LINK32) -subsystem:console -out:$@ @<<\r
+               $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)\r
+<<\r
+\r
+perlmain.c : runperl.c\r
+       copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+       $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+       $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \\r
+           $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+       copy $(PERLEXE) $(WPERLEXE)\r
+       $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+       copy splittree.pl ..\r
+       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+       if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+       cd $(EXTDIR)\$(*B)\r
+       ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+       ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+       cd ..\..\win32\r
+       $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+       $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+       cd $(EXTDIR)\$(*B)\r
+       $(XSUBPP) dl_win32.xs > $(*B).c\r
+       cd ..\..\win32\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+       copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+#----------------------------------------------------------------------------------\r
+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)\r
+       $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
+\r
+Extensions_clean: \r
+       -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
+\r
+#----------------------------------------------------------------------------------\r
+\r
+doc: $(PERLEXE)\r
+       $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+           --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \\r
+           --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+       cd ..\utils\r
+       $(MAKE) PERL=$(MINIPERL)\r
+       cd ..\pod\r
+       copy ..\README.aix      .\perlaix.pod\r
+       copy ..\README.amiga    .\perlamiga.pod\r
+       copy ..\README.apollo   .\perlapollo.pod\r
+       copy ..\README.beos     .\perlbeos.pod\r
+       copy ..\README.bs2000   .\perlbs2000.pod\r
+       copy ..\README.cygwin   .\perlcygwin.pod\r
+       copy ..\README.dgux     .\perldgux.pod\r
+       copy ..\README.dos      .\perldos.pod\r
+       copy ..\README.epoc     .\perlepoc.pod\r
+       copy ..\README.hurd     .\perlhurd.pod\r
+       copy ..\README.hpux     .\perlhpux.pod\r
+       copy ..\README.machten  .\perlmachten.pod\r
+       copy ..\README.macos    .\perlmacos.pod\r
+       copy ..\README.mint     .\perlmint.pod\r
+       copy ..\README.mpeix    .\perlmpeix.pod\r
+       copy ..\README.netware  .\perlnetware.pod\r
+       copy ..\README.os2      .\perlos2.pod\r
+       copy ..\README.os390    .\perlos390.pod\r
+       copy ..\README.plan9    .\perlplan9.pod\r
+       copy ..\README.qnx      .\perlqnx.pod\r
+       copy ..\README.solaris  .\perlsolaris.pod\r
+       copy ..\README.tru64    .\perltru64.pod\r
+       copy ..\README.uts      .\perluts.pod\r
+       copy ..\README.vmesa    .\perlvmesa.pod\r
+       copy ..\vms\perlvms.pod .\perlvms.pod\r
+       copy ..\README.vos      .\perlvos.pod\r
+       copy ..\README.win32    .\perlwin32.pod\r
+       $(MAKE) -f ..\win32\pod.mak converters\r
+       cd ..\lib\r
+       $(PERLEXE) lib_pm.PL\r
+       cd ..\win32\r
+       $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+       -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+               $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)\r
+       -del /f *.def *.map\r
+       -del /f $(EXTENSION_DLL)\r
+       -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm\r
+       -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+       -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+       -del /f $(LIBDIR)\XSLoader.pm\r
+       -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+       -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
+       -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+       -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+       -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+       -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+       -del /f $(LIBDIR)\File\Glob.pm\r
+       -del /f $(LIBDIR)\Storable.pm\r
+       -del /f $(LIBDIR)\Filter\Util\Call.pm\r
+       -del /f $(LIBDIR)\Digest\MD5.pm\r
+       -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
+       -del /f $(LIBDIR)\PerlIO\Via.pm\r
+       -del /f $(LIBDIR)\MIME\Base64.pm\r
+       -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
+       -del /f $(LIBDIR)\List\Util.pm\r
+       -del /f $(LIBDIR)\Scalar\Util.pm\r
+       -del /f $(LIBDIR)\Time\HiRes.pm\r
+       -del /f $(LIBDIR)\Time\Piece.pm\r
+       -del /f $(LIBDIR)\XS\Typemap.pm\r
+       -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO\r
+       -rmdir /s $(LIBDIR)\IO\r
+       -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread\r
+       -rmdir /s $(LIBDIR)\Thread\r
+       -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B\r
+       -rmdir /s $(LIBDIR)\B\r
+       -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data\r
+       -rmdir /s $(LIBDIR)\Data\r
+       -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util\r
+       -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest\r
+       -rmdir /s $(LIBDIR)\Digest\r
+       -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME\r
+       -rmdir /s $(LIBDIR)\MIME\r
+       -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List\r
+       -rmdir /s $(LIBDIR)\List\r
+       -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar\r
+       -rmdir /s $(LIBDIR)\Scalar\r
+       -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS\r
+       -rmdir /s $(LIBDIR)\XS\r
+       cd $(PODDIR)\r
+       -del /f *.html *.bat checkpods \\r
+           perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \\r
+           perlbs2000.pod perlcygwin.pod perldgux.pod \\r
+           perldos.pod perlepoc.pod perlhurd.pod \\r
+           perlhpux.pod perlmachten.pod \\r
+           perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \\r
+           perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \\r
+           perlsolaris.pod perltru64.pod perluts.pod \\r
+           perlvmesa.pod perlvms.pod perlvos.pod \\r
+           perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
+           podchecker podselect\r
+       cd ..\utils\r
+       -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp\r
+       -del /f *.bat\r
+       cd ..\win32\r
+       cd ..\x2p\r
+       -del /f find2perl s2p\r
+       -del /f *.bat\r
+       cd ..\win32\r
+       -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+       -del /f $(CONFIGPM)\r
+       -del /f bin\*.bat\r
+       cd $(EXTDIR)\r
+       -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib\r
+       cd ..\win32\r
+       -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)\r
+       -rmdir /s $(AUTODIR)\r
+       -if exist $(COREDIR) rmdir /s /q $(COREDIR)\r
+       -rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : utils\r
+       $(PERLEXE) ..\installperl\r
+       if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+       $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+       $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+       $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+       copy splittree.pl ..\r
+       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+       $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+       $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+       attrib -r ..\t\*.*\r
+       copy test ..\t\r
+       cd ..\t\r
+       $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+       cd ..\win32\r
+\r
+test-prep : all utils\r
+       $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+       $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+\r
+test : test-prep\r
+       cd ..\t\r
+       $(PERLEXE) -I..\lib harness\r
+       cd ..\win32\r
+\r
+test-notty : test-prep\r
+       set PERL_SKIP_TTY_TEST=1\r
+       cd ..\t\r
+       $(PERLEXE) -I..\lib harness\r
+       cd ..\win32\r
+\r
+test-wide : test-prep\r
+       set HARNESS_PERL_SWITCHES=-C\r
+       cd ..\t\r
+       $(PERLEXE) -I..\lib harness\r
+       cd ..\win32\r
+\r
+test-wide-notty : test-prep\r
+       set PERL_SKIP_TTY_TEST=1\r
+       set HARNESS_PERL_SWITCHES=-C\r
+       cd ..\t\r
+       $(PERLEXE) -I..\lib harness\r
+       cd ..\win32\r
+\r
+clean : Extensions_clean\r
+       -@$(DEL) miniperlmain$(o)\r
+       -@$(DEL) $(MINIPERL)\r
+       -@$(DEL) perlglob$(o)\r
+       -@$(DEL) perlmain$(o)\r
+       -@$(DEL) config.w32\r
+       -@$(DEL) config.h\r
+       -@$(DEL) $(GLOBEXE)\r
+       -@$(DEL) $(PERLEXE)\r
+       -@$(DEL) $(WPERLEXE)\r
+       -@$(DEL) $(PERLDLL)\r
+       -@$(DEL) $(CORE_OBJ)\r
+       -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)\r
+       -rmdir /s $(MINIDIR)\r
+       -@$(DEL) $(WIN32_OBJ)\r
+       -@$(DEL) $(DLL_OBJ)\r
+       -@$(DEL) $(X2P_OBJ)\r
+       -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res\r
+       -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+       -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat\r
+       -@$(DEL) *.ilk\r
+       -@$(DEL) *.pdb\r
+\r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "nmake nok" instead.\r
+ok: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+\r
+nok: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+\r
+nokfile: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r

diff --git a/win32/makefile.mk b/win32/makefile.mk
index 142bc2e..d523b7b 100644 (file)
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -1,1266 +1,1268 @@
-#
-# Makefile to build perl on Windows NT using DMAKE.
-# Supported compilers:
-#      Visual C++ 2.0 thro 6.0
-#      Borland C++ 5.02
-#      Mingw32 with gcc-2.95.2 or better  **experimental**
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll).  Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration.  Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "dmake install" to put your
-# newly built perl.
-#
-INST_DRV       *= c:
-INST_TOP       *= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location.  Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to.  If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER       *= \5.7.1
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components.  This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files.  Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location.  Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH      *= \$(ARCHNAME)
-
-#
-# uncomment to enable multiple interpreters.  This is need for fork()
-# emulation.
-#
-USE_MULTI      *= define
-
-#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation.  This needs
-# USE_MULTI as well.
-#
-USE_ITHREADS   *= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl.  This needs USE_MULTI above.  This is also needed to
-# get fork().
-#
-USE_IMP_SYS    *= define
-
-#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO     = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities.  This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS       *= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005.  This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT    *= define
-
-#
-# uncomment exactly one of the following
-#
-# Visual C++ 2.x
-#CCTYPE                *= MSVC20
-# Visual C++ > 2.x and < 6.x
-#CCTYPE                *= MSVC
-# Visual C++ >= 6.x
-CCTYPE         *= MSVC60
-# Borland 5.02 or later
-#CCTYPE                *= BORLAND
-# mingw32+gcc-2.95.2 or better
-#CCTYPE                *= GCC
-
-#
-# uncomment this if your Borland compiler is older than v5.4.
-BCCOLD = define
-#
-# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL = define
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95      *= define
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-CFG            *= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT   *= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful.  This option is supported only with
-# Visual C.
-#
-#USE_SETARGV   *= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32).  File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC     *= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB     *= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it.  Be prepared to recompile all
-# extensions if you change the default.  Currently, this cannot be enabled
-# if you ask for USE_IMP_SYS above.
-#
-#PERL_MALLOC   *= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-#CCHOME                *= F:\borland\bc5
-CCHOME         *= $(MSVCDIR)
-#CCHOME                *= c:\gcc-2.95.2
-CCINCDIR       *= $(CCHOME)\include
-CCLIBDIR       *= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution.  You most
-# probably just want to build modules that won't compile with
-#         perl Makefile.PL POLLUTE=1
-# instead of enabling this.  Please report such modules to the respective
-# authors.
-#
-#BUILDOPT      += -DPERL_POLLUTE
-
-#
-# This should normally be disabled.  Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT      += -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled.  Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT      += -DPERL_TEXTMODE_SCRIPTS
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS   *=
-
-#
-# set this to point to cmd.exe (only needed if you use some
-# alternate shell that doesn't grok cmd.exe style commands)
-#
-#SHELL         *= g:\winnt\system32\cmd.exe
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL         *=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT                = undef
-.ELSE
-D_CRYPT                = define
-CRYPT_FLAG     = -DHAVE_DES_FCRYPT
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC    != undef
-USE_5005THREADS        != undef
-USE_MULTI      != undef
-USE_IMP_SYS    != define
-.ENDIF
-
-PERL_MALLOC    *= undef
-
-USE_5005THREADS        *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS   != undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC    != undef
-.ENDIF
-
-USE_MULTI      *= undef
-USE_OBJECT     *= undef
-USE_ITHREADS   *= undef
-USE_IMP_SYS    *= undef
-USE_PERLIO     *= undef
-USE_PERLCRT    *= undef
-
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
-USE_MULTI      != define
-.ENDIF
-
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
-USE_MULTI      != define
-USE_5005THREADS        != undef
-.ENDIF
-
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT       += -DPERL_IMPLICIT_CONTEXT
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT       += -DPERL_IMPLICIT_SYS
-.ENDIF
-
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
-
-PROCESSOR_ARCHITECTURE *= x86
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-.ELSE
-.IF "$(USE_PERLIO)" == "define"
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
-.ELSE
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-
-.IF "$(USE_ITHREADS)" == "define"
-ARCHNAME       !:= $(ARCHNAME)-thread
-.ENDIF
-
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand.  Makes the test suite
-# run in about 10% less time.
-DELAYLOAD      *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled.  Anything earlier fails tests.
-CFG            *= Optimize
-.ENDIF
-.ENDIF
-
-ARCHDIR                = ..\lib\$(ARCHNAME)
-COREDIR                = ..\lib\CORE
-AUTODIR                = ..\lib\auto
-LIBDIR         = ..\lib
-EXTDIR         = ..\ext
-PODDIR         = ..\pod
-EXTUTILSDIR    = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT    = $(INST_TOP)$(INST_VER)\bin
-INST_BIN       = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB       = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB   = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR   = $(INST_ARCHLIB)\CORE
-INST_POD       = $(INST_LIB)\pod
-INST_HTML      = $(INST_TOP)$(INST_VER)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-.USESHELL :
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC             = bcc32
-.IF "$(BCCOLD)" != "define"
-LINK32         = ilink32
-.ELSE
-LINK32         = tlink32
-.ENDIF
-LIB32          = tlib /P128
-IMPLIB         = implib -c
-RSC            = rc
-
-#
-# Options
-#
-INCLUDES       = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS      = -H -Hc -H=c:\temp\bcmoduls.pch 
-DEFINES                = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS                = -DPERLDLL -DPERL_CORE
-SUBSYS         = console
-CXX_FLAG       = -P
-
-LIBC           = cw32mti.lib
-LIBFILES       = $(CRYPT_LIB) import32.lib $(LIBC)
-
-.IF  "$(CFG)" == "Debug"
-OPTIMIZE       = -v -D_RTLDLL -DDEBUGGING
-LINK_DBG       = -v
-.ELSE
-OPTIMIZE       = -O2 -D_RTLDLL
-LINK_DBG       =
-.ENDIF
-
-CFLAGS         = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-               $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS     = $(LINK_DBG) -L"$(INST_COREDIR)"  -L"$(CCLIBDIR)"
-OBJOUT_FLAG    = -o
-EXEOUT_FLAG    = -e
-LIBOUT_FLAG    =
-.IF "$(BCCOLD)" != "define"
-LINK_FLAGS     += -Gn
-DEFINES  += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
-.END
-.IF "$(BCCVCL)" == "define"
-LIBC           = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
-LINK_FLAGS     += -L"$(CCLIBDIR)\Release"
-.END
-
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CC             = gcc
-LINK32         = gcc
-LIB32          = ar rc
-IMPLIB         = dlltool
-RSC            = rc
-
-i = .i
-o = .o
-a = .a
-
-#
-# Options
-#
-
-INCLUDES       = -I.\include -I. -I.. -I$(COREDIR)
-DEFINES                = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS                = -DPERLDLL -DPERL_CORE
-SUBSYS         = console
-CXX_FLAG       = -xc++
-
-LIBC           = -lmsvcrt
-
-# same libs as MSVC
-LIBFILES       = $(CRYPT_LIB) $(LIBC) \
-                 -lmoldname -lkernel32 -luser32 -lgdi32 \
-                 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-                 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
-                 -lwinmm -lversion -lodbc32
-
-.IF  "$(CFG)" == "Debug"
-OPTIMIZE       = -g -O2 -DDEBUGGING
-LINK_DBG       = -g
-.ELSE
-OPTIMIZE       = -g -O2
-LINK_DBG       = -g
-.ENDIF
-
-CFLAGS         = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS     = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG    = -o
-EXEOUT_FLAG    = -o
-LIBOUT_FLAG    =
-
-# NOTE: we assume that GCC uses MSVCRT.DLL
-BUILDOPT       += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-
-.ELSE
-
-CC             = cl
-LINK32         = link
-LIB32          = $(LINK32) -lib
-RSC            = rc
-
-#
-# Options
-#
-
-INCLUDES       = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS      = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES                = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS                = -DPERLDLL -DPERL_CORE
-SUBSYS         = console
-CXX_FLAG       = -TP -GX
-
-.IF "$(USE_PERLCRT)" != "define"
-LIBC   = msvcrt.lib
-.ELSE
-LIBC   = PerlCRT.lib
-.ENDIF
-
-PERLEXE_RES    =
-PERLDLL_RES    =
-
-.IF  "$(CFG)" == "Debug"
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE       = -Od -MD -Z7 -DDEBUGGING
-LINK_DBG       = -debug -pdb:none
-.ELSE
-# -Zi requires .pdb file(s)
-#OPTIMIZE      = -Od -MD -Zi -DDEBUGGING
-#LINK_DBG      = -debug
-OPTIMIZE       = -O1 -MD -Z7 -DDEBUGGING
-LINK_DBG       = -debug -debugtype:both -pdb:none
-.ENDIF
-.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE      = -O2 -MD -DNDEBUG
-OPTIMIZE       = -O1 -MD -DNDEBUG
-.ELSE
-OPTIMIZE       = -Od -MD -DNDEBUG
-.ENDIF
-LINK_DBG       = -release
-.ENDIF
-
-LIBBASEFILES   = $(CRYPT_LIB) \
-               oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
-               comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
-               netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
-               version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES       = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS         = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
-               $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS     = -nologo -nodefaultlib $(LINK_DBG) \
-               -libpath:"$(INST_COREDIR)" \
-               -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG    = -Fo
-EXEOUT_FLAG    = -Fe
-LIBOUT_FLAG    = /out:
-
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT       += -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE       += $(CXX_FLAG)
-BUILDOPT       += -DPERL_OBJECT
-.ENDIF
-
-CFLAGS_O       = $(CFLAGS) $(BUILDOPT)
-
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-#   -- BKS, 12-12-1999
-PRIV_LINK_FLAGS        *=
-BLINK_FLAGS    = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o *= .obj
-a *= .lib
-
-LKPRE          = INPUT (
-LKPOST         = )
-
-#
-# Rules
-#
-
-.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
-
-.c$(o):
-       $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.c.i:
-       $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
-
-.y.c:
-       $(NOOP)
-
-$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
-       $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
-       $(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
-       $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
-.ELSE
-       $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-           -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-.ENDIF
-
-.rc.res:
-       $(RSC) -i.. $<
-
-#
-# various targets
-MINIPERL       = ..\miniperl.exe
-MINIDIR                = .\mini
-PERLEXE                = ..\perl.exe
-WPERLEXE       = ..\wperl.exe
-GLOBEXE                = ..\perlglob.exe
-CONFIGPM       = ..\lib\Config.pm
-MINIMOD                = ..\lib\ExtUtils\Miniperl.pm
-X2P            = ..\x2p\a2p.exe
-
-# Nominate a target which causes extensions to be re-built
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend
-# on and really only the interface - i.e. the .def file used to export symbols
-# from the .dll
-PERLDEP = perldll.def
-
-
-PL2BAT         = bin\pl2bat.pl
-GLOBBAT                = bin\perlglob.bat
-
-UTILS          =                       \
-               ..\utils\h2ph           \
-               ..\utils\splain         \
-               ..\utils\dprofpp        \
-               ..\utils\perlbug        \
-               ..\utils\pl2pm          \
-               ..\utils\c2ph           \
-               ..\utils\h2xs           \
-               ..\utils\perldoc        \
-               ..\utils\perlcc         \
-               ..\pod\checkpods        \
-               ..\pod\pod2html         \
-               ..\pod\pod2latex        \
-               ..\pod\pod2man          \
-               ..\pod\pod2text         \
-               ..\pod\pod2usage        \
-               ..\pod\podchecker       \
-               ..\pod\podselect        \
-               ..\x2p\find2perl        \
-               ..\x2p\s2p              \
-               bin\exetype.pl          \
-               bin\runperl.pl          \
-               bin\pl2bat.pl           \
-               bin\perlglob.pl         \
-               bin\search.pl
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL     = config.bc
-CFGH_TMPL      = config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CFGSH_TMPL     = config.gc
-CFGH_TMPL      = config_H.gc
-PERLIMPLIB     = ..\libperl57$(a)
-
-.ELSE
-
-CFGSH_TMPL     = config.vc
-CFGH_TMPL      = config_H.vc
-
-.ENDIF
-
-# makedef.pl must be updated if this changes, and this should normally
-# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB     *= ..\perl57$(a)
-PERLDLL                = ..\perl57.dll
-
-XCOPY          = xcopy /f /r /i /d
-RCOPY          = xcopy /f /r /i /e /d
-NOOP           = @echo
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP         = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-               -C++ -prototypes
-
-MICROCORE_SRC  =               \
-               ..\av.c         \
-               ..\deb.c        \
-               ..\doio.c       \
-               ..\doop.c       \
-               ..\dump.c       \
-               ..\globals.c    \
-               ..\gv.c         \
-               ..\hv.c         \
-               ..\locale.c     \
-               ..\mg.c         \
-               ..\numeric.c    \
-               ..\op.c         \
-               ..\perl.c       \
-               ..\perlapi.c    \
-               ..\perly.c      \
-               ..\pp.c         \
-               ..\pp_ctl.c     \
-               ..\pp_hot.c     \
-               ..\pp_pack.c    \
-               ..\pp_sys.c     \
-               ..\regcomp.c    \
-               ..\regexec.c    \
-               ..\run.c        \
-               ..\scope.c      \
-               ..\sv.c         \
-               ..\taint.c      \
-               ..\toke.c       \
-               ..\universal.c  \
-               ..\utf8.c       \
-               ..\util.c       \
-               ..\xsutils.c
-
-EXTRACORE_SRC  += perllib.c
-
-.IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC  += ..\malloc.c
-.ENDIF
-
-.IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC  += ..\perlio.c
-.ENDIF
-
-WIN32_SRC      =               \
-               .\win32.c       \
-               .\win32io.c     \
-               .\win32sck.c    \
-               .\win32thread.c
-
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC      += .\$(CRYPT_SRC)
-.ENDIF
-
-DLL_SRC                = $(DYNALOADER).c
-
-X2P_SRC                =               \
-               ..\x2p\a2p.c    \
-               ..\x2p\hash.c   \
-               ..\x2p\str.c    \
-               ..\x2p\util.c   \
-               ..\x2p\walk.c
-
-CORE_NOCFG_H   =               \
-               ..\av.h         \
-               ..\cop.h        \
-               ..\cv.h         \
-               ..\dosish.h     \
-               ..\embed.h      \
-               ..\form.h       \
-               ..\gv.h         \
-               ..\handy.h      \
-               ..\hv.h         \
-               ..\iperlsys.h   \
-               ..\mg.h         \
-               ..\nostdio.h    \
-               ..\op.h         \
-               ..\opcode.h     \
-               ..\perl.h       \
-               ..\perlapi.h    \
-               ..\perlsdio.h   \
-               ..\perlsfio.h   \
-               ..\perly.h      \
-               ..\pp.h         \
-               ..\proto.h      \
-               ..\regexp.h     \
-               ..\scope.h      \
-               ..\sv.h         \
-               ..\thread.h     \
-               ..\unixish.h    \
-               ..\utf8.h       \
-               ..\util.h       \
-               ..\warnings.h   \
-               ..\XSUB.h       \
-               ..\EXTERN.h     \
-               ..\perlvars.h   \
-               ..\intrpvar.h   \
-               ..\thrdvar.h    \
-               .\include\dirent.h      \
-               .\include\netdb.h       \
-               .\include\sys\socket.h  \
-               .\win32.h
-
-CORE_H         = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ  = $(MICROCORE_SRC:db:+$(o))
-CORE_OBJ       = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
-WIN32_OBJ      = $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ   = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
-MINIWIN32_OBJ  = $(MINIDIR)\{$(WIN32_OBJ:f)}
-MINI_OBJ       = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ                = $(DLL_SRC:db:+$(o))
-X2P_OBJ                = $(X2P_SRC:db:+$(o))
-
-PERLDLL_OBJ    = $(CORE_OBJ)
-PERLEXE_OBJ    = perlmain$(o)
-
-PERLDLL_OBJ    += $(WIN32_OBJ) $(DLL_OBJ)
-
-.IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ    = setargv$(o)
-.ENDIF
-
-DYNAMIC_EXT    = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
-               Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
-               Sys/Hostname Storable Filter/Util/Call Encode \
-               Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece
-STATIC_EXT     = DynaLoader
-NONXS_EXT      = Errno
-
-DYNALOADER     = $(EXTDIR)\DynaLoader\DynaLoader
-
-POD2HTML       = $(PODDIR)\pod2html
-POD2MAN                = $(PODDIR)\pod2man
-POD2LATEX      = $(PODDIR)\pod2latex
-POD2TEXT       = $(PODDIR)\pod2text
-
-# vars must be separated by "\t+~\t+", since we're using the tempfile
-# version of config_sh.pl (we were overflowing someone's buffer by
-# trying to fit them all on the command line)
-#      -- BKS 10-17-1999
-CFG_VARS       =                                       \
-               INST_DRV=$(INST_DRV)            ~       \
-               INST_TOP=$(INST_TOP:s/\/\\/)    ~       \
-               INST_VER=$(INST_VER:s/\/\\/)    ~       \
-               INST_ARCH=$(INST_ARCH)          ~       \
-               archname=$(ARCHNAME)            ~       \
-               cc=$(CC)                        ~       \
-               ld=$(LINK32)                    ~       \
-               ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)      ~       \
-               cf_email=$(EMAIL)               ~       \
-               d_crypt=$(D_CRYPT)              ~       \
-               d_mymalloc=$(PERL_MALLOC)       ~       \
-               libs=$(LIBFILES:f)              ~       \
-               incpath=$(CCINCDIR:s/\/\\/)     ~       \
-               libperl=$(PERLIMPLIB:f)         ~       \
-               libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)      ~       \
-               libc=$(LIBC)                    ~       \
-               make=dmake                      ~       \
-               _o=$(o) obj_ext=$(o)            ~       \
-               _a=$(a) lib_ext=$(a)            ~       \
-               static_ext=$(STATIC_EXT)        ~       \
-               use5005threads=$(USE_5005THREADS)       ~       \
-               useithreads=$(USE_ITHREADS)     ~       \
-               usethreads=$(USE_5005THREADS)   ~       \
-               usemultiplicity=$(USE_MULTI)    ~       \
-               useperlio=$(USE_PERLIO)         ~       \
-               LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)                ~       \
-               optimize=$(OPTIMIZE)
-
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2            = .\makefile.95
-RIGHTMAKE      = __switch_makefiles
-NOOP           = @rem
-.ELSE
-MK2            = __not_needed
-RIGHTMAKE      =
-.ENDIF
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)         \
-       $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)  \
-       $(X2P) Extensions 
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#----------------------------------------------------------------
-
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-#  1. it switches to the Win95-specific makefile if it exists
-#     (__do_switch_makefiles)
-#  2. it prints a message when the Win95-specific one finishes (__done)
-#  3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
-       if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
-       $(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
-       @echo Build process complete. Ignore any errors after this message.
-       @echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
-       $(NOOP)
-
-__no_such_target:
-       $(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
-       $(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to
-# use this file
-__not_needed:
-       $(NOOP)
-
-$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
-       $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
-       $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
-           "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
-.ELSE
-       $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
-           perlglob$(o) setargv$(o)
-.ENDIF
-
-perlglob$(o)  : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
-       copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
-       -del /f config.h
-       copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
-       $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
-           $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
-       perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
-           $(CFGSH_TMPL) > ..\config.sh
-       -cd .. && del /f perl.exe
-       cd .. && perl configpm
-       -del /f $(CFGH_TMPL)
-       -mkdir $(COREDIR)
-       -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
-       rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-       cd .. && miniperl configpm
-       if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
-       $(XCOPY) ..\*.h $(COREDIR)\*.*
-       $(XCOPY) *.h $(COREDIR)\*.*
-       $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
-       $(RCOPY) include $(COREDIR)\*.*
-       $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
-           || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
-       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-           @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
-           $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
-       $(LINK32) -subsystem:console -out:$@ \
-           @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
-.ENDIF
-
-$(MINIDIR) :
-       if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
-       $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
-       $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
-# unless the .IF is true), so instead we use a .ELSE with the default.
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-
-perllib$(o)    : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
-       $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-.ELSE
-       $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
-.ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ)    : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ)   : $(CORE_H)
-$(CORE_OBJ)    : $(CORE_H)
-$(DLL_OBJ)     : $(CORE_H)
-$(X2P_OBJ)     : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
-       $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
-       $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-.IF "$(CCTYPE)" == "BORLAND"
-       $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
-           @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
-               $@,\n \
-               $(LIBFILES)\n \
-               perldll.def\n)
-       $(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
-           $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-       dlltool --output-lib $(PERLIMPLIB) \
-               --dllname $(PERLDLL:b).dll \
-               --def perldll.def \
-               --base-file perl.base \
-               --output-exp perl.exp
-       $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
-           $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
-               perl.exp $(LKPOST))
-.ELSE
-       $(LINK32) -dll -def:perldll.def -out:$@ \
-           @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
-               $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
-.ENDIF
-       $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
-       cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
-       $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
-       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
-       $(MINIPERL) ..\x2p\find2perl.PL
-       $(MINIPERL) ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
-       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-           @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) -v -o $@ $(BLINK_FLAGS) \
-           $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
-       $(LINK32) -subsystem:console -out:$@ \
-           @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
-.ENDIF
-
-perlmain.c : runperl.c
-       copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
-       $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
-       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
-           @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
-           $(@:s,\,\\),\n \
-           $(PERLIMPLIB) $(LIBFILES)\n)
-.ELIF "$(CCTYPE)" == "GCC"
-       $(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
-           $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
-.ELSE
-       $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
-           $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
-.ENDIF
-       copy $(PERLEXE) $(WPERLEXE)
-       $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
-       copy splittree.pl ..
-       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
-       if not exist $(AUTODIR) mkdir $(AUTODIR)
-       cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
-       cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
-       $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
-       $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
-       cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
-       $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
-       copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-#----------------------------------------------------------------------------------
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) 
-       $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-
-Extensions_clean : 
-       -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-
-#----------------------------------------------------------------------------------
-
-
-doc: $(PERLEXE)
-       $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
-           --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
-           --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
-       cd ..\utils && $(MAKE) PERL=$(MINIPERL)
-       copy ..\README.aix      ..\pod\perlaix.pod
-       copy ..\README.amiga    ..\pod\perlamiga.pod
-       copy ..\README.apollo   ..\pod\perlapollo.pod
-       copy ..\README.beos     ..\pod\perlbeos.pod
-       copy ..\README.bs2000   ..\pod\perlbs2000.pod
-       copy ..\README.cygwin   ..\pod\perlcygwin.pod
-       copy ..\README.dgux     ..\pod\perldgux.pod
-       copy ..\README.dos      ..\pod\perldos.pod
-       copy ..\README.epoc     ..\pod\perlepoc.pod
-       copy ..\README.hpux     ..\pod\perlhpux.pod
-       copy ..\README.hurd     ..\pod\perlhurd.pod
-       copy ..\README.machten  ..\pod\perlmachten.pod
-       copy ..\README.macos    ..\pod\perlmacos.pod
-       copy ..\README.mint     ..\pod\perlmint.pod
-       copy ..\README.mpeix    ..\pod\perlmpeix.pod
-       copy ..\README.netware  ..\pod\perlnetware.pod
-       copy ..\README.os2      ..\pod\perlos2.pod
-       copy ..\README.os390    ..\pod\perlos390.pod
-       copy ..\README.plan9    ..\pod\perlplan9.pod
-       copy ..\README.qnx      ..\pod\perlqnx.pod
-       copy ..\README.solaris  ..\pod\perlsolaris.pod
-       copy ..\README.tru64    ..\pod\perltru64.pod
-       copy ..\README.vmesa    ..\pod\perlvmesa.pod
-       copy ..\vms\perlvms.pod ..\pod\perlvms.pod
-       copy ..\README.vos      ..\pod\perlvos.pod
-       copy ..\README.win32    ..\pod\perlwin32.pod
-       cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
-       cd ..\lib && $(PERLEXE) lib_pm.PL
-       $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
-       -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
-               $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-       -del /f *.def *.map
-       -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-       -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-       -del /f $(LIBDIR)\XSLoader.pm
-       -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-       -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-       -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-       -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-       -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-       -del /f $(LIBDIR)\PerlIO\Scalar.pm
-       -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-       -del /f $(LIBDIR)\File\Glob.pm
-       -del /f $(LIBDIR)\Storable.pm
-       -del /f $(LIBDIR)\Filter\Util\Call.pm
-       -del /f $(LIBDIR)\Digest\MD5.pm
-       -del /f $(LIBDIR)\MIME\Base64.pm
-       -del /f $(LIBDIR)\MIME\QuotedPrint.pm
-       -del /f $(LIBDIR)\Time\HiRes.pm
-       -del /f $(LIBDIR)\List\Util.pm
-       -del /f $(LIBDIR)\Scalar\Util.pm
-       -del /f $(LIBDIR)\Time\Piece.pm
-       -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-       -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-       -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
-       -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-       -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
-       -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
-       -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
-       -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
-       -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
-       -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
-       -cd $(PODDIR) && del /f *.html *.bat checkpods \
-           perlaix.pod perlamiga.pod perlapollo.pod \
-           perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \
-           perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
-           perlmachten.pod perlmint.pod \
-           perlmacos.pod perlmpeix.pod perlnetware.pod \
-           perlos2.pod perlos390.pod \
-           perlplan9.pod perlqnx.pod \
-           perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \
-           perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
-           podchecker podselect
-       -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
-           dprofpp *.bat
-       -cd ..\x2p && del /f find2perl s2p *.bat
-       -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-       -del /f $(CONFIGPM)
-       -del /f bin\*.bat
-       -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
-           pm_to_blib
-       -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-       -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : $(RIGHTMAKE) utils
-       $(PERLEXE) ..\installperl
-       if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
-       $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
-       $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
-       $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
-       copy splittree.pl ..
-       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-       $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
-       $(XCOPY) $(MINIPERL) ..\t\perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
-       $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
-       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-       attrib -r ..\t\*.*
-       copy test ..\t
-       cd ..\t && \
-       $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-
-test-prep : all utils
-       $(XCOPY) $(PERLEXE) ..\t\$(NULL)
-       $(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
-       $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
-       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-
-test : $(RIGHTMAKE) test-prep
-       cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-notty : test-prep
-       set PERL_SKIP_TTY_TEST=1 && \
-           cd ..\t && $(PERLEXE) -I.\lib harness
-
-test-wide : test-prep
-       set HARNESS_PERL_SWITCHES=-C && \
-           cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-wide-notty : test-prep
-       set PERL_SKIP_TTY_TEST=1 && \
-           set HARNESS_PERL_SWITCHES=-C && \
-           cd ..\t && $(PERLEXE) -I..\lib harness
-
-clean : Extensions_clean
-       -@erase miniperlmain$(o)
-       -@erase $(MINIPERL)
-       -@erase perlglob$(o)
-       -@erase perlmain$(o)
-       -@erase config.w32
-       -@erase /f config.h
-       -@erase $(GLOBEXE)
-       -@erase $(PERLEXE)
-       -@erase $(WPERLEXE)
-       -@erase $(PERLDLL)
-       -@erase $(CORE_OBJ)
-       -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-       -@erase $(WIN32_OBJ)
-       -@erase $(DLL_OBJ)
-       -@erase $(X2P_OBJ)
-       -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
-       -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-       -@erase ..\x2p\*.exe ..\x2p\*.bat
-       -@erase *.ilk
-       -@erase *.pdb
-
-# Handy way to run perlbug -ok without having to install and run the
-# installed perlbug. We don't re-run the tests here - we trust the user.
-# Please *don't* use this unless all tests pass.
-# If you want to report test failures, use "dmake nok" instead.
-ok: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
-
-okfile: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
-
-nok: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
-
-nokfile: utils
-       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
+#\r
+# Makefile to build perl on Windows NT using DMAKE.\r
+# Supported compilers:\r
+#      Visual C++ 2.0 thro 6.0\r
+#      Borland C++ 5.02\r
+#      Mingw32 with gcc-2.95.2 or better  **experimental**\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl57.dll).  Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration.  Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "dmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV       *= c:\r
+INST_TOP       *= $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location.  Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to.  If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+INST_VER       *= \5.7.1\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components.  This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files.  Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location.  Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+INST_ARCH      *= \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters.  This is need for fork()\r
+# emulation.\r
+#\r
+USE_MULTI      *= define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation.  This needs\r
+# USE_MULTI as well.\r
+#\r
+USE_ITHREADS   *= define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl.  This needs USE_MULTI above.  This is also needed to\r
+# get fork().\r
+#\r
+USE_IMP_SYS    *= define\r
+\r
+#\r
+# uncomment to enable the experimental PerlIO I/O subsystem.\r
+USE_PERLIO     = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities.  This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS       *= define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_MULTI instead).\r
+#\r
+# uncomment next line if you want to use the PERL_OBJECT build option.\r
+# DO NOT ENABLE unless you have legacy code that relies on the C++\r
+# CPerlObj class that was available in 5.005.  This cannot be enabled\r
+# if you ask for USE_5005THREADS above.\r
+#\r
+#USE_OBJECT    *= define\r
+\r
+#\r
+# uncomment exactly one of the following\r
+#\r
+# Visual C++ 2.x\r
+#CCTYPE                *= MSVC20\r
+# Visual C++ > 2.x and < 6.x\r
+#CCTYPE                *= MSVC\r
+# Visual C++ >= 6.x\r
+CCTYPE         *= MSVC60\r
+# Borland 5.02 or later\r
+#CCTYPE                *= BORLAND\r
+# mingw32+gcc-2.95.2 or better\r
+#CCTYPE                *= GCC\r
+\r
+#\r
+# uncomment this if your Borland compiler is older than v5.4.\r
+BCCOLD = define\r
+#\r
+# uncomment this if you want to use Borland's VCL as your CRT\r
+#BCCVCL = define\r
+\r
+#\r
+# uncomment this if you are compiling under Windows 95/98 and command.com\r
+# (not needed if you're running under 4DOS/NT 6.01 or later)\r
+#IS_WIN95      *= define\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+# If not enabled, we automatically try to use maximum optimization\r
+# with all compilers that are known to have a working optimizer.\r
+#\r
+CFG            *= Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT   *= define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful.  This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV   *= define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32).  File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC     *= fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB     *= fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it.  Be prepared to recompile all\r
+# extensions if you change the default.  Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC   *= define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME                *= F:\borland\bc5\r
+CCHOME         *= $(MSVCDIR)\r
+#CCHOME                *= c:\gcc-2.95.2\r
+CCINCDIR       *= $(CCHOME)\include\r
+CCLIBDIR       *= $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled.  Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution.  You most\r
+# probably just want to build modules that won't compile with\r
+#         perl Makefile.PL POLLUTE=1\r
+# instead of enabling this.  Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT      += -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled.  Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT      += -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled.  Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT      += -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS   *=\r
+\r
+#\r
+# set this to point to cmd.exe (only needed if you use some\r
+# alternate shell that doesn't grok cmd.exe style commands)\r
+#\r
+#SHELL         *= g:\winnt\system32\cmd.exe\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL         *=\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT                = undef\r
+.ELSE\r
+D_CRYPT                = define\r
+CRYPT_FLAG     = -DHAVE_DES_FCRYPT\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+PERL_MALLOC    != undef\r
+USE_5005THREADS        != undef\r
+USE_MULTI      != undef\r
+USE_IMP_SYS    != define\r
+.ENDIF\r
+\r
+PERL_MALLOC    *= undef\r
+\r
+USE_5005THREADS        *= undef\r
+\r
+.IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS   != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC    != undef\r
+.ENDIF\r
+\r
+USE_MULTI      *= undef\r
+USE_OBJECT     *= undef\r
+USE_ITHREADS   *= undef\r
+USE_IMP_SYS    *= undef\r
+USE_PERLIO     *= undef\r
+USE_PERLCRT    *= undef\r
+\r
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
+USE_MULTI      != define\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
+USE_MULTI      != define\r
+USE_5005THREADS        != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
+BUILDOPT       += -DPERL_IMPLICIT_CONTEXT\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT       += -DPERL_IMPLICIT_SYS\r
+.ENDIF\r
+\r
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE\r
+\r
+PROCESSOR_ARCHITECTURE *= x86\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
+.ELIF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+.ELIF "$(USE_MULTI)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+.ELSE\r
+.IF "$(USE_PERLIO)" == "define"\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
+.ELSE\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+.ENDIF\r
+ARCHNAME       = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME       !:= $(ARCHNAME)-thread\r
+.ENDIF\r
+\r
+# Visual Studio 98 specific\r
+.IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand.  Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD      *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
+\r
+.IF "$(CFG)" == "Debug"\r
+.ELSE\r
+# VC 6.0 seems capable of compiling perl correctly with optimizations\r
+# enabled.  Anything earlier fails tests.\r
+CFG            *= Optimize\r
+.ENDIF\r
+.ENDIF\r
+\r
+ARCHDIR                = ..\lib\$(ARCHNAME)\r
+COREDIR                = ..\lib\CORE\r
+AUTODIR                = ..\lib\auto\r
+LIBDIR         = ..\lib\r
+EXTDIR         = ..\ext\r
+PODDIR         = ..\pod\r
+EXTUTILSDIR    = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT    = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN       = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB       = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB   = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR   = $(INST_ARCHLIB)\CORE\r
+INST_POD       = $(INST_LIB)\pod\r
+INST_HTML      = $(INST_TOP)$(INST_VER)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+.USESHELL :\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CC             = bcc32\r
+.IF "$(BCCOLD)" != "define"\r
+LINK32         = ilink32\r
+.ELSE\r
+LINK32         = tlink32\r
+.ENDIF\r
+LIB32          = tlib /P128\r
+IMPLIB         = implib -c\r
+RSC            = rc\r
+\r
+#\r
+# Options\r
+#\r
+INCLUDES       = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"\r
+#PCHFLAGS      = -H -Hc -H=c:\temp\bcmoduls.pch \r
+DEFINES                = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS                = -DPERLDLL -DPERL_CORE\r
+SUBSYS         = console\r
+CXX_FLAG       = -P\r
+\r
+LIBC           = cw32mti.lib\r
+LIBFILES       = $(CRYPT_LIB) import32.lib $(LIBC)\r
+\r
+.IF  "$(CFG)" == "Debug"\r
+OPTIMIZE       = -v -D_RTLDLL -DDEBUGGING\r
+LINK_DBG       = -v\r
+.ELSE\r
+OPTIMIZE       = -O2 -D_RTLDLL\r
+LINK_DBG       =\r
+.ENDIF\r
+\r
+CFLAGS         = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+               $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS     = $(LINK_DBG) -L"$(INST_COREDIR)"  -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG    = -o\r
+EXEOUT_FLAG    = -e\r
+LIBOUT_FLAG    =\r
+.IF "$(BCCOLD)" != "define"\r
+LINK_FLAGS     += -Gn\r
+DEFINES  += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410\r
+.END\r
+.IF "$(BCCVCL)" == "define"\r
+LIBC           = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib\r
+LINK_FLAGS     += -L"$(CCLIBDIR)\Release"\r
+.END\r
+\r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CC             = gcc\r
+LINK32         = gcc\r
+LIB32          = ar rc\r
+IMPLIB         = dlltool\r
+RSC            = rc\r
+\r
+i = .i\r
+o = .o\r
+a = .a\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES       = -I.\include -I. -I.. -I$(COREDIR)\r
+DEFINES                = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS                = -DPERLDLL -DPERL_CORE\r
+SUBSYS         = console\r
+CXX_FLAG       = -xc++\r
+\r
+LIBC           = -lmsvcrt\r
+\r
+# same libs as MSVC\r
+LIBFILES       = $(CRYPT_LIB) $(LIBC) \\r
+                 -lmoldname -lkernel32 -luser32 -lgdi32 \\r
+                 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \\r
+                 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \\r
+                 -lwinmm -lversion -lodbc32\r
+\r
+.IF  "$(CFG)" == "Debug"\r
+OPTIMIZE       = -g -O2 -DDEBUGGING\r
+LINK_DBG       = -g\r
+.ELSE\r
+OPTIMIZE       = -g -O2\r
+LINK_DBG       = -g\r
+.ENDIF\r
+\r
+CFLAGS         = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)\r
+LINK_FLAGS     = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG    = -o\r
+EXEOUT_FLAG    = -o\r
+LIBOUT_FLAG    =\r
+\r
+# NOTE: we assume that GCC uses MSVCRT.DLL\r
+BUILDOPT       += -fno-strict-aliasing -DPERL_MSVCRT_READFIX\r
+\r
+.ELSE\r
+\r
+CC             = cl\r
+LINK32         = link\r
+LIB32          = $(LINK32) -lib\r
+RSC            = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES       = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS      = -Fpc:\temp\vcmoduls.pch -YX\r
+DEFINES                = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS                = -DPERLDLL -DPERL_CORE\r
+SUBSYS         = console\r
+CXX_FLAG       = -TP -GX\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+LIBC   = msvcrt.lib\r
+.ELSE\r
+LIBC   = PerlCRT.lib\r
+.ENDIF\r
+\r
+PERLEXE_RES    =\r
+PERLDLL_RES    =\r
+\r
+.IF  "$(CFG)" == "Debug"\r
+.IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE       = -Od -MD -Z7 -DDEBUGGING\r
+LINK_DBG       = -debug -pdb:none\r
+.ELSE\r
+# -Zi requires .pdb file(s)\r
+#OPTIMIZE      = -Od -MD -Zi -DDEBUGGING\r
+#LINK_DBG      = -debug\r
+OPTIMIZE       = -O1 -MD -Z7 -DDEBUGGING\r
+LINK_DBG       = -debug -debugtype:both -pdb:none\r
+.ENDIF\r
+.ELSE\r
+.IF "$(CFG)" == "Optimize"\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE      = -O2 -MD -DNDEBUG\r
+OPTIMIZE       = -O1 -MD -DNDEBUG\r
+.ELSE\r
+OPTIMIZE       = -Od -MD -DNDEBUG\r
+.ENDIF\r
+LINK_DBG       = -release\r
+.ENDIF\r
+\r
+LIBBASEFILES   = $(CRYPT_LIB) \\r
+               oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+               comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+               netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+               version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES       = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS         = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+               $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS     = -nologo -nodefaultlib $(LINK_DBG) \\r
+               -libpath:"$(INST_COREDIR)" \\r
+               -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG    = -Fo\r
+EXEOUT_FLAG    = -Fe\r
+LIBOUT_FLAG    = /out:\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT       += -DPERL_MSVCRT_READFIX\r
+.ENDIF\r
+\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+OPTIMIZE       += $(CXX_FLAG)\r
+BUILDOPT       += -DPERL_OBJECT\r
+.ENDIF\r
+\r
+CFLAGS_O       = $(CFLAGS) $(BUILDOPT)\r
+\r
+# used to allow local linking flags that are not propogated into Config.pm,\r
+# currently unused\r
+#   -- BKS, 12-12-1999\r
+PRIV_LINK_FLAGS        *=\r
+BLINK_FLAGS    = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o *= .obj\r
+a *= .lib\r
+\r
+LKPRE          = INPUT (\r
+LKPOST         = )\r
+\r
+#\r
+# Rules\r
+#\r
+\r
+.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res\r
+\r
+.c$(o):\r
+       $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.c.i:\r
+       $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@\r
+\r
+.y.c:\r
+       $(NOOP)\r
+\r
+$(o).dll:\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def\r
+       $(IMPLIB) $(*B).lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)\r
+       $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@\r
+.ELSE\r
+       $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+           -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
+.ENDIF\r
+\r
+.rc.res:\r
+       $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+MINIPERL       = ..\miniperl.exe\r
+MINIDIR                = .\mini\r
+PERLEXE                = ..\perl.exe\r
+WPERLEXE       = ..\wperl.exe\r
+GLOBEXE                = ..\perlglob.exe\r
+CONFIGPM       = ..\lib\Config.pm\r
+MINIMOD                = ..\lib\ExtUtils\Miniperl.pm\r
+X2P            = ..\x2p\a2p.exe\r
+\r
+# Nominate a target which causes extensions to be re-built\r
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
+# on and really only the interface - i.e. the .def file used to export symbols\r
+# from the .dll\r
+PERLDEP = perldll.def\r
+\r
+\r
+PL2BAT         = bin\pl2bat.pl\r
+GLOBBAT                = bin\perlglob.bat\r
+\r
+UTILS          =                       \\r
+               ..\utils\h2ph           \\r
+               ..\utils\splain         \\r
+               ..\utils\dprofpp        \\r
+               ..\utils\perlbug        \\r
+               ..\utils\pl2pm          \\r
+               ..\utils\c2ph           \\r
+               ..\utils\h2xs           \\r
+               ..\utils\perldoc        \\r
+               ..\utils\perlcc         \\r
+               ..\pod\checkpods        \\r
+               ..\pod\pod2html         \\r
+               ..\pod\pod2latex        \\r
+               ..\pod\pod2man          \\r
+               ..\pod\pod2text         \\r
+               ..\pod\pod2usage        \\r
+               ..\pod\podchecker       \\r
+               ..\pod\podselect        \\r
+               ..\x2p\find2perl        \\r
+               ..\x2p\s2p              \\r
+               bin\exetype.pl          \\r
+               bin\runperl.pl          \\r
+               bin\pl2bat.pl           \\r
+               bin\perlglob.pl         \\r
+               bin\search.pl\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CFGSH_TMPL     = config.bc\r
+CFGH_TMPL      = config_H.bc\r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CFGSH_TMPL     = config.gc\r
+CFGH_TMPL      = config_H.gc\r
+PERLIMPLIB     = ..\libperl57$(a)\r
+\r
+.ELSE\r
+\r
+CFGSH_TMPL     = config.vc\r
+CFGH_TMPL      = config_H.vc\r
+\r
+.ENDIF\r
+\r
+# makedef.pl must be updated if this changes, and this should normally\r
+# only change when there is an incompatible revision of the public API.\r
+# XXX so why did we change it from perl56 to perl57?\r
+PERLIMPLIB     *= ..\perl57$(a)\r
+PERLDLL                = ..\perl57.dll\r
+\r
+XCOPY          = xcopy /f /r /i /d\r
+RCOPY          = xcopy /f /r /i /e /d\r
+NOOP           = @echo\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP         = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+               -C++ -prototypes\r
+\r
+MICROCORE_SRC  =               \\r
+               ..\av.c         \\r
+               ..\deb.c        \\r
+               ..\doio.c       \\r
+               ..\doop.c       \\r
+               ..\dump.c       \\r
+               ..\globals.c    \\r
+               ..\gv.c         \\r
+               ..\hv.c         \\r
+               ..\locale.c     \\r
+               ..\mg.c         \\r
+               ..\numeric.c    \\r
+               ..\op.c         \\r
+               ..\perl.c       \\r
+               ..\perlapi.c    \\r
+               ..\perly.c      \\r
+               ..\pp.c         \\r
+               ..\pp_ctl.c     \\r
+               ..\pp_hot.c     \\r
+               ..\pp_pack.c    \\r
+               ..\pp_sys.c     \\r
+               ..\regcomp.c    \\r
+               ..\regexec.c    \\r
+               ..\run.c        \\r
+               ..\scope.c      \\r
+               ..\sv.c         \\r
+               ..\taint.c      \\r
+               ..\toke.c       \\r
+               ..\universal.c  \\r
+               ..\utf8.c       \\r
+               ..\util.c       \\r
+               ..\xsutils.c\r
+\r
+EXTRACORE_SRC  += perllib.c\r
+\r
+.IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC  += ..\malloc.c\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" != "define"\r
+EXTRACORE_SRC  += ..\perlio.c\r
+.ENDIF\r
+\r
+WIN32_SRC      =               \\r
+               .\win32.c       \\r
+               .\win32io.c     \\r
+               .\win32sck.c    \\r
+               .\win32thread.c\r
+\r
+.IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC      += .\$(CRYPT_SRC)\r
+.ENDIF\r
+\r
+DLL_SRC                = $(DYNALOADER).c\r
+\r
+X2P_SRC                =               \\r
+               ..\x2p\a2p.c    \\r
+               ..\x2p\hash.c   \\r
+               ..\x2p\str.c    \\r
+               ..\x2p\util.c   \\r
+               ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H   =               \\r
+               ..\av.h         \\r
+               ..\cop.h        \\r
+               ..\cv.h         \\r
+               ..\dosish.h     \\r
+               ..\embed.h      \\r
+               ..\form.h       \\r
+               ..\gv.h         \\r
+               ..\handy.h      \\r
+               ..\hv.h         \\r
+               ..\iperlsys.h   \\r
+               ..\mg.h         \\r
+               ..\nostdio.h    \\r
+               ..\op.h         \\r
+               ..\opcode.h     \\r
+               ..\perl.h       \\r
+               ..\perlapi.h    \\r
+               ..\perlsdio.h   \\r
+               ..\perlsfio.h   \\r
+               ..\perly.h      \\r
+               ..\pp.h         \\r
+               ..\proto.h      \\r
+               ..\regexp.h     \\r
+               ..\scope.h      \\r
+               ..\sv.h         \\r
+               ..\thread.h     \\r
+               ..\unixish.h    \\r
+               ..\utf8.h       \\r
+               ..\util.h       \\r
+               ..\warnings.h   \\r
+               ..\XSUB.h       \\r
+               ..\EXTERN.h     \\r
+               ..\perlvars.h   \\r
+               ..\intrpvar.h   \\r
+               ..\thrdvar.h    \\r
+               .\include\dirent.h      \\r
+               .\include\netdb.h       \\r
+               .\include\sys\socket.h  \\r
+               .\win32.h\r
+\r
+CORE_H         = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ  = $(MICROCORE_SRC:db:+$(o))\r
+CORE_OBJ       = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))\r
+WIN32_OBJ      = $(WIN32_SRC:db:+$(o))\r
+MINICORE_OBJ   = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}\r
+MINIWIN32_OBJ  = $(MINIDIR)\{$(WIN32_OBJ:f)}\r
+MINI_OBJ       = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ                = $(DLL_SRC:db:+$(o))\r
+X2P_OBJ                = $(X2P_SRC:db:+$(o))\r
+\r
+PERLDLL_OBJ    = $(CORE_OBJ)\r
+PERLEXE_OBJ    = perlmain$(o)\r
+\r
+PERLDLL_OBJ    += $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+.IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ    = setargv$(o)\r
+.ENDIF\r
+\r
+DYNAMIC_EXT    = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \\r
+               Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \\r
+               Sys/Hostname Storable Filter/Util/Call Encode \\r
+               Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece\r
+STATIC_EXT     = DynaLoader\r
+NONXS_EXT      = Errno\r
+\r
+DYNALOADER     = $(EXTDIR)\DynaLoader\DynaLoader\r
+\r
+POD2HTML       = $(PODDIR)\pod2html\r
+POD2MAN                = $(PODDIR)\pod2man\r
+POD2LATEX      = $(PODDIR)\pod2latex\r
+POD2TEXT       = $(PODDIR)\pod2text\r
+\r
+# vars must be separated by "\t+~\t+", since we're using the tempfile\r
+# version of config_sh.pl (we were overflowing someone's buffer by\r
+# trying to fit them all on the command line)\r
+#      -- BKS 10-17-1999\r
+CFG_VARS       =                                       \\r
+               INST_DRV=$(INST_DRV)            ~       \\r
+               INST_TOP=$(INST_TOP:s/\/\\/)    ~       \\r
+               INST_VER=$(INST_VER:s/\/\\/)    ~       \\r
+               INST_ARCH=$(INST_ARCH)          ~       \\r
+               archname=$(ARCHNAME)            ~       \\r
+               cc=$(CC)                        ~       \\r
+               ld=$(LINK32)                    ~       \\r
+               ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)      ~       \\r
+               cf_email=$(EMAIL)               ~       \\r
+               d_crypt=$(D_CRYPT)              ~       \\r
+               d_mymalloc=$(PERL_MALLOC)       ~       \\r
+               libs=$(LIBFILES:f)              ~       \\r
+               incpath=$(CCINCDIR:s/\/\\/)     ~       \\r
+               libperl=$(PERLIMPLIB:f)         ~       \\r
+               libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)      ~       \\r
+               libc=$(LIBC)                    ~       \\r
+               make=dmake                      ~       \\r
+               _o=$(o) obj_ext=$(o)            ~       \\r
+               _a=$(a) lib_ext=$(a)            ~       \\r
+               static_ext=$(STATIC_EXT)        ~       \\r
+               use5005threads=$(USE_5005THREADS)       ~       \\r
+               useithreads=$(USE_ITHREADS)     ~       \\r
+               usethreads=$(USE_5005THREADS)   ~       \\r
+               usemultiplicity=$(USE_MULTI)    ~       \\r
+               useperlio=$(USE_PERLIO)         ~       \\r
+               LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)                ~       \\r
+               optimize=$(OPTIMIZE)\r
+\r
+#\r
+# set up targets varying between Win95 and WinNT builds\r
+#\r
+\r
+.IF "$(IS_WIN95)" == "define"\r
+MK2            = .\makefile.95\r
+RIGHTMAKE      = __switch_makefiles\r
+NOOP           = @rem\r
+.ELSE\r
+MK2            = __not_needed\r
+RIGHTMAKE      =\r
+.ENDIF\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)         \\r
+       $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)  \\r
+       $(X2P) Extensions \r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#----------------------------------------------------------------\r
+\r
+#-------------------- BEGIN Win95 SPECIFIC ----------------------\r
+\r
+# this target is a jump-off point for Win95\r
+#  1. it switches to the Win95-specific makefile if it exists\r
+#     (__do_switch_makefiles)\r
+#  2. it prints a message when the Win95-specific one finishes (__done)\r
+#  3. it then kills this makefile by trying to make __no_such_target\r
+\r
+__switch_makefiles: __do_switch_makefiles __done __no_such_target\r
+\r
+__do_switch_makefiles:\r
+.IF "$(NOTFIRST)" != "true"\r
+       if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true\r
+.ELSE\r
+       $(NOOP)\r
+.ENDIF\r
+\r
+.IF "$(NOTFIRST)" != "true"\r
+__done:\r
+       @echo Build process complete. Ignore any errors after this message.\r
+       @echo Run "dmake test" to test and "dmake install" to install\r
+\r
+.ELSE\r
+# dummy targets for Win95-specific makefile\r
+\r
+__done:\r
+       $(NOOP)\r
+\r
+__no_such_target:\r
+       $(NOOP)\r
+\r
+.ENDIF\r
+\r
+# This target is used to generate the new makefile (.\makefile.95) for Win95\r
+\r
+.\makefile.95: .\makefile.mk\r
+       $(MINIPERL) genmk95.pl makefile.mk $(MK2)\r
+\r
+#--------------------- END Win95 SPECIFIC ---------------------\r
+\r
+# a blank target for when builds don't need to do certain things\r
+# this target added for Win95 port but used to keep the WinNT port able to\r
+# use this file\r
+__not_needed:\r
+       $(NOOP)\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c\r
+       $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \\r
+           "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)\r
+.ELSE\r
+       $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+           perlglob$(o) setargv$(o)\r
+.ENDIF\r
+\r
+perlglob$(o)  : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+       copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)\r
+       -del /f config.h\r
+       copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm\r
+       $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \\r
+           $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+       perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \\r
+           $(CFGSH_TMPL) > ..\config.sh\r
+       -cd .. && del /f perl.exe\r
+       cd .. && perl configpm\r
+       -del /f $(CFGH_TMPL)\r
+       -mkdir $(COREDIR)\r
+       -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+       rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+       cd .. && miniperl configpm\r
+       if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+       $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+       $(XCOPY) *.h $(COREDIR)\*.*\r
+       $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+       $(RCOPY) include $(COREDIR)\*.*\r
+       $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \\r
+           || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+           @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \\r
+           $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+.ELSE\r
+       $(LINK32) -subsystem:console -out:$@ \\r
+           @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+$(MINIDIR) :\r
+       if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+       $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+       $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless\r
+# unless the .IF is true), so instead we use a .ELSE with the default.\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+\r
+perllib$(o)    : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
+       $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+.ELSE\r
+       $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c\r
+.ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ)    : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ)   : $(CORE_H)\r
+$(CORE_OBJ)    : $(CORE_H)\r
+$(DLL_OBJ)     : $(CORE_H)\r
+$(X2P_OBJ)     : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+       $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \\r
+       $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(LINK32) -Tpd -ap $(BLINK_FLAGS) \\r
+           @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \\r
+               $@,\n \\r
+               $(LIBFILES)\n \\r
+               perldll.def\n)\r
+       $(IMPLIB) $*.lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \\r
+           $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+       dlltool --output-lib $(PERLIMPLIB) \\r
+               --dllname $(PERLDLL:b).dll \\r
+               --def perldll.def \\r
+               --base-file perl.base \\r
+               --output-exp perl.exp\r
+       $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \\r
+           $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \\r
+               perl.exp $(LKPOST))\r
+.ELSE\r
+       $(LINK32) -dll -def:perldll.def -out:$@ \\r
+           @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \\r
+               $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))\r
+.ENDIF\r
+       $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+       cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+       $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+       $(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+       $(MINIPERL) ..\x2p\find2perl.PL\r
+       $(MINIPERL) ..\x2p\s2p.PL\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+           @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) -v -o $@ $(BLINK_FLAGS) \\r
+           $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+.ELSE\r
+       $(LINK32) -subsystem:console -out:$@ \\r
+           @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+perlmain.c : runperl.c\r
+       copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+       $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+           @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \\r
+           $(@:s,\,\\),\n \\r
+           $(PERLIMPLIB) $(LIBFILES)\n)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+       $(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \\r
+           $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)\r
+.ELSE\r
+       $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \\r
+           $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+.ENDIF\r
+       copy $(PERLEXE) $(WPERLEXE)\r
+       $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+       copy splittree.pl ..\r
+       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+       if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+       cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+       cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+       $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+       $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+       cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c\r
+       $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+       copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+#----------------------------------------------------------------------------------\r
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) \r
+       $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
+\r
+Extensions_clean : \r
+       -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
+\r
+#----------------------------------------------------------------------------------\r
+\r
+\r
+doc: $(PERLEXE)\r
+       $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+           --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\\r
+           --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+       cd ..\utils && $(MAKE) PERL=$(MINIPERL)\r
+       copy ..\README.aix      ..\pod\perlaix.pod\r
+       copy ..\README.amiga    ..\pod\perlamiga.pod\r
+       copy ..\README.apollo   ..\pod\perlapollo.pod\r
+       copy ..\README.beos     ..\pod\perlbeos.pod\r
+       copy ..\README.bs2000   ..\pod\perlbs2000.pod\r
+       copy ..\README.cygwin   ..\pod\perlcygwin.pod\r
+       copy ..\README.dgux     ..\pod\perldgux.pod\r
+       copy ..\README.dos      ..\pod\perldos.pod\r
+       copy ..\README.epoc     ..\pod\perlepoc.pod\r
+       copy ..\README.hpux     ..\pod\perlhpux.pod\r
+       copy ..\README.hurd     ..\pod\perlhurd.pod\r
+       copy ..\README.machten  ..\pod\perlmachten.pod\r
+       copy ..\README.macos    ..\pod\perlmacos.pod\r
+       copy ..\README.mint     ..\pod\perlmint.pod\r
+       copy ..\README.mpeix    ..\pod\perlmpeix.pod\r
+       copy ..\README.netware  ..\pod\perlnetware.pod\r
+       copy ..\README.os2      ..\pod\perlos2.pod\r
+       copy ..\README.os390    ..\pod\perlos390.pod\r
+       copy ..\README.plan9    ..\pod\perlplan9.pod\r
+       copy ..\README.qnx      ..\pod\perlqnx.pod\r
+       copy ..\README.solaris  ..\pod\perlsolaris.pod\r
+       copy ..\README.tru64    ..\pod\perltru64.pod\r
+       copy ..\README.uts      ..\pod\perluts.pod\r
+       copy ..\README.vmesa    ..\pod\perlvmesa.pod\r
+       copy ..\vms\perlvms.pod ..\pod\perlvms.pod\r
+       copy ..\README.vos      ..\pod\perlvos.pod\r
+       copy ..\README.win32    ..\pod\perlwin32.pod\r
+       cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters\r
+       cd ..\lib && $(PERLEXE) lib_pm.PL\r
+       $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+       -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+               $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)\r
+       -del /f *.def *.map\r
+       -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+       -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+       -del /f $(LIBDIR)\XSLoader.pm\r
+       -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+       -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
+       -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+       -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+       -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+       -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
+       -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+       -del /f $(LIBDIR)\File\Glob.pm\r
+       -del /f $(LIBDIR)\Storable.pm\r
+       -del /f $(LIBDIR)\Filter\Util\Call.pm\r
+       -del /f $(LIBDIR)\Digest\MD5.pm\r
+       -del /f $(LIBDIR)\MIME\Base64.pm\r
+       -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
+       -del /f $(LIBDIR)\Time\HiRes.pm\r
+       -del /f $(LIBDIR)\List\Util.pm\r
+       -del /f $(LIBDIR)\Scalar\Util.pm\r
+       -del /f $(LIBDIR)\Time\Piece.pm\r
+       -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO\r
+       -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread\r
+       -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B\r
+       -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data\r
+       -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter\r
+       -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter\r
+       -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest\r
+       -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME\r
+       -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List\r
+       -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar\r
+       -cd $(PODDIR) && del /f *.html *.bat checkpods \\r
+           perlaix.pod perlamiga.pod perlapollo.pod \\r
+           perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \\r
+           perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \\r
+           perlmachten.pod perlmint.pod \\r
+           perlmacos.pod perlmpeix.pod perlnetware.pod \\r
+           perlos2.pod perlos390.pod \\r
+           perlplan9.pod perlqnx.pod \\r
+           perlsolaris.pod perltru64.pod perluts.pod \\r
+           perlvmesa.pod perlvms.pod perlvos.pod \\r
+           perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
+           podchecker podselect\r
+       -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \\r
+           dprofpp *.bat\r
+       -cd ..\x2p && del /f find2perl s2p *.bat\r
+       -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+       -del /f $(CONFIGPM)\r
+       -del /f bin\*.bat\r
+       -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \\r
+           pm_to_blib\r
+       -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)\r
+       -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : $(RIGHTMAKE) utils\r
+       $(PERLEXE) ..\installperl\r
+       if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+       $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+       $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+       $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+       copy splittree.pl ..\r
+       $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+       $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+       $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+       attrib -r ..\t\*.*\r
+       copy test ..\t\r
+       cd ..\t && \\r
+       $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+\r
+test-prep : all utils\r
+       $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+       $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+       $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+       $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+\r
+test : $(RIGHTMAKE) test-prep\r
+       cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-notty : test-prep\r
+       set PERL_SKIP_TTY_TEST=1 && \\r
+           cd ..\t && $(PERLEXE) -I.\lib harness\r
+\r
+test-wide : test-prep\r
+       set HARNESS_PERL_SWITCHES=-C && \\r
+           cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-wide-notty : test-prep\r
+       set PERL_SKIP_TTY_TEST=1 && \\r
+           set HARNESS_PERL_SWITCHES=-C && \\r
+           cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+clean : Extensions_clean\r
+       -@erase miniperlmain$(o)\r
+       -@erase $(MINIPERL)\r
+       -@erase perlglob$(o)\r
+       -@erase perlmain$(o)\r
+       -@erase config.w32\r
+       -@erase /f config.h\r
+       -@erase $(GLOBEXE)\r
+       -@erase $(PERLEXE)\r
+       -@erase $(WPERLEXE)\r
+       -@erase $(PERLDLL)\r
+       -@erase $(CORE_OBJ)\r
+       -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)\r
+       -@erase $(WIN32_OBJ)\r
+       -@erase $(DLL_OBJ)\r
+       -@erase $(X2P_OBJ)\r
+       -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res\r
+       -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+       -@erase ..\x2p\*.exe ..\x2p\*.bat\r
+       -@erase *.ilk\r
+       -@erase *.pdb\r
+\r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "dmake nok" instead.\r
+ok: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+\r
+nok: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+\r
+nokfile: utils\r
+       $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r