DG/UX was a Unix sold by Data General. The last release was in April 2001.
It only runs on Data General's own hardware.
hints/darwin.sh Hints for named architecture
hints/dcosx.sh Hints for named architecture
hints/dec_osf.sh Hints for named architecture
-hints/dgux.sh Hints for named architecture
hints/dos_djgpp.sh Hints for named architecture
hints/dragonfly.sh Hints for named architecture
hints/dynixptx.sh Hints for named architecture
README.ce Perl notes for WinCE
README.cn Perl for Simplified Chinese (in EUC-CN)
README.cygwin Perl notes for Cygwin
-README.dgux Perl notes for DG/UX
README.dos Perl notes for DOS
README.freebsd Perl notes for FreeBSD
README.haiku Perl notes for Haiku
+++ /dev/null
-If you read this file _as_is_, just ignore the funny characters you
-see. It is written in the POD format (see perlpod manpage) which is
-specially designed to be readable as is.
-
-=head1 NAME
-
-perldgux - Perl under DG/UX.
-
-=head1 SYNOPSIS
-
-One can read this document in the following formats:
-
- man perldgux
- view perl perldgux
- explorer perldgux.html
- info perldgux
-
-to list some (not all may be available simultaneously), or it may
-be read I<as is>: as F<README.dgux>.
-
-=cut
-
-Contents
-
- perldgux - Perl under DG/UX.
-
- NAME
- SYNOPSIS
- DESCRIPTION
- BUILD
- - Non-threaded Case
- - Threaded Case
- - Testing
- - Installing the built perl
- AUTHOR
- SEE ALSO
-
-=head1 DESCRIPTION
-
-Perl 5.7/8.x for DG/UX ix86 R4.20MU0x
-
-=head1 BUILDING PERL ON DG/UX
-
-=head2 Non-threaded Perl on DG/UX
-
-Just run ./Configure script from the top directory.
-Then give "make" to compile.
-
-=head2 Threaded Perl on DG/UX
-
-If you are using as compiler GCC-2.95.x rev(DG/UX)
-an easy solution for configuring perl in your DG/UX
-machine is to run the command:
-
-./Configure -Dusethreads -Duseithreads -Dusedevel -des
-
-This will automatically accept all the defaults and
-in particular /usr/local/ as installation directory.
-Note that GCC-2.95.x rev(DG/UX) knows the switch
--pthread which allows it to link correctly DG/UX's
--lthread library.
-
-If you want to change the installation directory or
-have a standard DG/UX with C compiler GCC-2.7.2.x
-then you have no choice than to do an interactive
-build by issuing the command:
-
-./Configure -Dusethreads -Duseithreads
-
-In particular with GCC-2.7.2.x accept all the defaults
-and *watch* out for the message:
-
- Any additional ld flags (NOT including libraries)? [ -pthread]
-
-Instead of -pthread put here -lthread. CGCC-2.7.2.x
-that comes with the DG/UX OS does NOT know the -pthread
-switch. So your build will fail if you choose the defaults.
-After configuration is done correctly give "make" to compile.
-
-=head2 Testing Perl on DG/UX
-
-Issuing a "make test" will run all the tests.
-If the test lib/ftmp-security gives you as a result
-something like
-
- lib/ftmp-security....File::Temp::_gettemp:
- Parent directory (/tmp/) is not safe (sticky bit not set
- when world writable?) at lib/ftmp-security.t line 100
-
-don't panic and just set the sticky bit in your /tmp
-directory by doing the following as root:
-
-cd /
-chmod +t /tmp (=set the sticky bit to /tmp).
-
-Then rerun the tests. This time all must be OK.
-
-=head2 Installing the built perl on DG/UX
-
-Run the command "make install"
-
-=head1 AUTHOR
-
-Takis Psarogiannakopoulos
-University of Cambridge
-Centre for Mathematical Sciences
-Department of Pure Mathematics
-Wilberforce road
-Cambridge CB3 0WB , UK
-email <takis@XFree86.Org>
-
-=head1 SEE ALSO
-
-perl(1).
-
-=cut
-
+++ /dev/null
-# This is a hints file for DGUX, which is EMC's Data General's Unix. It
-# was originally developed with version 5.4.3.10 of the OS, and then was
-# later updated running under version 4.11.2 (running on m88k hardware).
-# The gross features should work with versions going back to 2.nil but
-# some tweaking will probably be necessary.
-#
-# DGUX is an SVR4 derivative. It ships with gcc as the standard
-# compiler. Since version 3.0 it has shipped with Perl 4.036
-# installed in /usr/bin, which is kind of neat. Be careful when you
-# install that you don't overwrite the system version, though (by
-# answering yes to the question about installing perl as /usr/bin/perl),
-# as it would suck to try to get support if the vendor learned that you
-# were physically replacing the system binaries.
-#
-# -Roderick Schertler <roderick@argon.org>
-
-# The standard system compiler is gcc, but invoking it as cc changes its
-# behavior. I have to pick one name or the other so I can get the
-# dynamic loading switches right (they vary depending on this). I'm
-# picking gcc because there's no way to get at the optimization options
-# and so on when you call it cc.
-
-##########################################
-# Modified by Takis Psarogiannakopoulos
-# University of Cambridge
-# Centre for Mathematical Sciences
-# Department of Pure Mathematics
-# Wilberforce road
-# Cambridge CB3 0WB , UK
-# e-mail <takis@XFree86.Org>
-# Use GCC-2.95.2/3 rev (DG/UX) for threads
-# This compiler supports the -pthread switch
-# to link correctly DG/UX 's -lthread.
-# March 2002
-###########################################
-
-cc=gcc
-ccflags="-DDGUX -D_DGUX_SOURCE"
-# Debug build. If using GNU as,ld use the flag -gstabs+
-# ccflags="-g -mstandard -DDGUX -D_DGUX_SOURCE -DDEBUGGING"
-# Dummy ; always compile with -O2 on GCC 2.95.2/3 rev (DG/UX)
-# even if you debugging the program!
-optimize="-mno-legend -O2"
-
-archname="ix86-dgux"
-libpth="/usr/lib"
-
-#####################################
-# <takis@XFree86.Org>
-# Change this if you want.
-# prefix =/usr/local
-#####################################
-
-prefix=/usr/local
-perlpath="$prefix/bin/perl519"
-startperl="#! $prefix/bin/perl519"
-privlib="$prefix/lib/perl519"
-man1dir="$prefix/man/man1"
-man3dir="$prefix/man/man3"
-
-sitearch="$prefix/lib/perl519/$archname"
-sitelib="$prefix/lib/perl519"
-
-#Do not overwrite by default /usr/bin/perl of DG/UX
-installusrbinperl="$undef"
-
-# Configure may fail to find lstat()
-# function in <sys/stat.h>.
-d_lstat='define'
-
-# Internal (perl) malloc is causing serious problems and
-# test failures in DG/UX. Most notable Embed.t
-# So for perl-5.7.3 and on do NOT use.
-# I have no time to investigate more.
-# <takis@XFree86.Org>
-
-case "$usemymalloc" in
-'') usemymalloc='n' ;;
-esac
-
-case "$uselongdouble" in
-'') uselongdouble='y' ;;
-esac
-
-#usevfork=true
-usevfork=false
-
-# DG has this thing set up with symlinks which point to different places
-# depending on environment variables (see elink(5)) and the compiler and
-# related tools use them to access different development environments
-# (COFF, ELF, m88k BCS and so on), see sde(5). The upshot, however, is
-# that when a normal program tries to access one of these elinks it sees
-# no such file (like stat()ting a mis-directed symlink). Setting
-# $plibpth to explicitly include the place to which the elinks point
-# allows Configure to find libraries which vary based on the development
-# environment.
-#
-# Starting with version 4.10 (the first time the OS supported Intel
-# hardware) all libraries are accessed with this mechanism.
-#
-# The default $TARGET_BINARY_INTERFACE changed with version 4.10. The
-# system now comes with a link named /usr/sde/default which points to
-# the proper entry, but older versions lacked this and used m88kdgux
-# directly.
-
-: && sde_path=${SDE_PATH:-/usr}/sde # hide from Configure
-while : # dummy loop
-do
- if [ -n "$TARGET_BINARY_INTERFACE" ]
- then set X "$TARGET_BINARY_INTERFACE"
- else set X default dg m88k_dg ix86_dg m88kdgux m88kdguxelf
- fi
- shift
- default_sde=$1
- for sde
- do
- [ -d "$sde_path/$sde" ] && break 2
- done
- cat <<END >&2
-
-NOTE: I can't figure out what SDE is used by default on this machine (I
-didn't find a likely directory under $sde_path). This is bad news. If
-this is a R4.10 or newer system I'm not going to be able to find any of
-your libraries, if this system is R3.10 or older I won't be able to find
-the math library. You should re-run Configure with the environment
-variable TARGET_BINARY_INTERFACE set to the proper value for this
-machine, see sde(5) and the notes in hints/dgux.sh.
-
-END
- sde=$default_sde
- break
-done
-
-plibpth="$plibpth $sde_path/$sde/usr/lib"
-unset sde_path default_sde sde
-
-#####################################
-# <takis@XFree86.Org>
-#####################################
-
-libperl="libperl519.so"
-
-# Many functions (eg, gethostent(), killpg(), getpriority(), setruid()
-# dbm_*(), and plenty more) are defined in -ldgc. Usually you don't
-# need to know this (it seems that libdgc.so is searched automatically
-# by ld), but Configure needs to check it otherwise it will report all
-# those functions as missing.
-
-#####################################
-# <takis@XFree86.Org>
-#####################################
-
-# libswanted="dgc gdbm $libswanted"
-#libswanted="dbm posix $libswanted"
-# Do *NOT* add there the malloc native
-# DG/UX library!
-libswanted="dbm posix resolv socket nsl dl m"
-
-#####################################
-# <takis@XFree86.Org>
-#####################################
-
-mydomain='.localhost'
-cf_by=`(whoami) 2>/dev/null`
-cf_email="$cf_by@localhost"
-
-# Dynamic loading works using the dlopen() functions. Note that dlfcn.h
-# used to be broken, it declared _dl*() rather than dl*(). This was the
-# case up to 3.10, it has been fixed in 4.11. I'm not sure if it was
-# fixed in 4.10. If you have the older header just ignore the warnings
-# (since pointers and integers have the same format on m88k).
-
-# usedl=true
-usedl=false
-
-# For cc rather than gcc the flags would be `-K PIC' for compiling and
-# -G for loading. I haven't tested this.
-
-#####################################
-# <takis@XFree86.Org>
-# Use -fPIC instead -fpic
-#####################################
-
-cccdlflags=-fPIC
-#We must use gcc
-ld="gcc"
-lddlflags="-shared"
-
-############################################################################
-# DGUX Posix 4A Draft 10 Thread support
-# <takis@XFree86.Org>
-# use Configure -Dusethreads to enable
-############################################################################
-
-cat > UU/usethreads.cbu <<'EOCBU'
-case "$usethreads" in
-$define|true|[yY]*)
- ccflags="$ccflags"
- # DG/UX has this for sure! Main Configure fails to
- # detect it but it is needed!
- d_pthread_atfork='define'
- shift
- # DG/UX's sched_yield is in -lrte
- # Do *NOT* add there the malloc native
- # DG/UX library!
- libswanted="dbm posix resolv socket nsl dl m rte"
- archname="ix86-dgux-thread"
- sitearch="$prefix/lib/perl519/$archname"
- sitelib="$prefix/lib/perl519"
- case "$cc" in
- *gcc*)
- #### Use GCC -2.95.2/3 rev (DG/UX) and -pthread
- #### Otherwise take out the switch -pthread
- #### And add manually the -D_POSIX4A_DRAFT10_SOURCE flag.
- ld="gcc"
- ccflags="$ccflags -D_POSIX4A_DRAFT10_SOURCE"
- # Debug build : use -DS flag on command line perl
- # ccflags="$ccflags -g -mstandard -DDEBUGGING -D_POSIX4A_DRAFT10_SOURCE -pthread"
- cccdlflags='-fPIC'
- lddlflags="-shared"
- #### Use GCC -2.95.2/3 rev (DG/UX) and -pthread
- #### Otherwise take out the switch -pthread
- #### And add manually the -lthread library.
- ldflags="$ldflags -pthread"
- ;;
-
- *)
- echo "Not supported DG/UX cc and threads !"
- ;;
- esac
-esac
-EOCBU
-
-# "./Configure -d" can't figure this out easily
-d_suidsafe='define'
-
-###################################################
PerlIO * PIO_stdout;
if (!sv_derived_from(PL_patchlevel, "version"))
upg_version(PL_patchlevel, TRUE);
-#if !defined(DGUX)
{
SV* level= vstringify(PL_patchlevel);
#ifdef PERL_PATCHNUM
);
SvREFCNT_dec(level);
}
-#else /* DGUX */
- PIO_stdout = PerlIO_stdout();
-/* Adjust verbose output as in the perl that ships with the DG/UX OS from EMC */
- PerlIO_printf(PIO_stdout,
- Perl_form(aTHX_ "\nThis is perl, %"SVf"\n",
- SVfARG(vstringify(PL_patchlevel))));
- PerlIO_printf(PIO_stdout,
- Perl_form(aTHX_ " built under %s at %s %s\n",
- OSNAME, __DATE__, __TIME__));
- PerlIO_printf(PIO_stdout,
- Perl_form(aTHX_ " OS Specific Release: %s\n",
- OSVERS));
-#endif /* !DGUX */
#if defined(LOCAL_PATCH_COUNT)
if (LOCAL_PATCH_COUNT > 0)
PerlIO_printf(PIO_stdout,
#define USE_STDIO
#endif /* PERL_FOR_X2P */
-#if defined(DGUX)
-#include <sys/fcntl.h>
-#endif
-
#ifdef VOIDUSED
# undef VOIDUSED
#endif
# define STANDARD_C 1
#endif
-#if defined(__cplusplus) || defined(WIN32) || defined(__sgi) || defined(__EMX__) || defined(__DGUX) || defined(__QNX__) || defined(NETWARE) || defined(PERL_MICRO)
+#if defined(__cplusplus) || defined(WIN32) || defined(__sgi) || defined(__EMX__) || defined(__QNX__) || defined(NETWARE) || defined(PERL_MICRO)
# define DONT_DECLARE_STD 1
#endif
# ifdef USE_ENVIRON_ARRAY
# if !defined(DONT_DECLARE_STD) || \
(defined(__svr4__) && defined(__GNUC__) && defined(sun)) || \
- defined(__sgi) || \
- defined(__DGUX)
+ defined(__sgi)
extern char ** environ; /* environment variables supplied via exec */
# endif
# endif
perlbs2000 Perl notes for POSIX-BC BS2000
perlce Perl notes for WinCE
perlcygwin Perl notes for Cygwin
- perldgux Perl notes for DG/UX
perldos Perl notes for DOS
perlfreebsd Perl notes for FreeBSD
perlhaiku Perl notes for Haiku
AIX aix aix
BSD/OS bsdos i386-bsdos
Darwin darwin darwin
- dgux dgux AViiON-dgux
DYNIX/ptx dynixptx i386-dynixptx
FreeBSD freebsd freebsd-i386
Haiku haiku BePC-haiku
=head1 SEE ALSO
L<perlaix>, L<perlamiga>, L<perlbs2000>,
-L<perlce>, L<perlcygwin>, L<perldgux>, L<perldos>,
+L<perlce>, L<perlcygwin>, L<perldos>,
L<perlebcdic>, L<perlfreebsd>, L<perlhurd>, L<perlhpux>, L<perlirix>,
L<perlmacos>, L<perlmacosx>,
L<perlnetware>, L<perlos2>, L<perlos390>, L<perlos400>,
$Is_OS2 = $^O eq 'os2';
$Is_Solaris = $^O eq 'solaris';
$Is_VMS = $^O eq 'VMS';
-$Is_DGUX = $^O eq 'dgux';
$Is_MPRAS = $^O =~ /svr4/ && -f '/etc/.relid';
$Is_Dosish = $Is_Dos || $Is_OS2 || $Is_MSWin32 || $Is_NetWare;
is($c1, $c2, "ls and $_[1] agreeing on /dev ($c1 $c2)");
};
-SKIP: {
- skip("DG/UX ls -L broken", 3) if $Is_DGUX;
-
+{
$try->('b', '-b');
$try->('c', '-c');
$try->('s', '-S');
-
}
ok(! -b $Curdir, '!-b cwd');
my $statfile = './op/stat.t';
ok( -T $statfile, '-T');
ok(! -B $statfile, '!-B');
-
-SKIP: {
- skip("DG/UX", 1) if $Is_DGUX;
ok(-B $Perl, '-B');
-}
-
ok(! -T $Perl, '!-T');
open(FOO,$statfile);
# endif
#endif
-#ifdef DGUX
-# define THREAD_CREATE_NEEDS_STACK (32*1024)
-#endif
-
#ifdef __VMS
/* Default is 1024 on VAX, 8192 otherwise */
# ifdef __ia64
copy ..\README.ce ..\pod\perlce.pod
copy ..\README.cn ..\pod\perlcn.pod
copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dgux ..\pod\perldgux.pod
copy ..\README.dos ..\pod\perldos.pod
copy ..\README.freebsd ..\pod\perlfreebsd.pod
copy ..\README.haiku ..\pod\perlhaiku.pod
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-cd $(PODDIR) && del /f *.html *.bat roffitall \
perl5191delta.pod perlaix.pod perlamiga.pod perlapi.pod \
- perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
- perldgux.pod perldos.pod perlfreebsd.pod perlhaiku.pod \
- perlhpux.pod perlhurd.pod perlintern.pod perlirix.pod \
- perljp.pod perlko.pod perllinux.pod perlmacos.pod \
- perlmacosx.pod perlmodlib.pod perlnetware.pod perlopenbsd.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlriscos.pod perlsolaris.pod perlsymbian.pod \
- perltoc.pod perltru64.pod perltw.pod perluniprops.pod \
- perlvos.pod perlwin32.pod
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod perldos.pod \
+ perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
+ perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
+ perlmacos.pod perlmacosx.pod perlmodlib.pod perlnetware.pod \
+ perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
+ perlplan9.pod perlqnx.pod perlriscos.pod perlsolaris.pod \
+ perlsymbian.pod perltoc.pod perltru64.pod perltw.pod \
+ perluniprops.pod perlvos.pod perlwin32.pod
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist config_data zipdetails
copy ..\README.ce ..\pod\perlce.pod
copy ..\README.cn ..\pod\perlcn.pod
copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dgux ..\pod\perldgux.pod
copy ..\README.dos ..\pod\perldos.pod
copy ..\README.freebsd ..\pod\perlfreebsd.pod
copy ..\README.haiku ..\pod\perlhaiku.pod
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-cd $(PODDIR) && del /f *.html *.bat roffitall \
perl5191delta.pod perlaix.pod perlamiga.pod perlapi.pod \
- perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
- perldgux.pod perldos.pod perlfreebsd.pod perlhaiku.pod \
- perlhpux.pod perlhurd.pod perlintern.pod perlirix.pod \
- perljp.pod perlko.pod perllinux.pod perlmacos.pod \
- perlmacosx.pod perlmodlib.pod perlnetware.pod perlopenbsd.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlriscos.pod perlsolaris.pod perlsymbian.pod \
- perltoc.pod perltru64.pod perltw.pod perluniprops.pod \
- perlvos.pod perlwin32.pod
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod perldos.pod \
+ perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
+ perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
+ perlmacos.pod perlmacosx.pod perlmodlib.pod perlnetware.pod \
+ perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
+ perlplan9.pod perlqnx.pod perlriscos.pod perlsolaris.pod \
+ perlsymbian.pod perltoc.pod perltru64.pod perltw.pod \
+ perluniprops.pod perlvos.pod perlwin32.pod
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist config_data zipdetails
https://perl5.git.perl.org / perl5.git / commitdiff