#endif
#endif
-#if { VERSION < 5.31.4 }
- /* Versions prior to this accepted things that are now considered
- * malformations, and didn't return -1 on error with warnings enabled
- * */
-# undef utf8_to_uvchr_buf
-#endif
-
-/* This implementation brings modern, generally more restricted standards to
- * utf8_to_uvchr_buf. Some of these are security related, and clearly must
- * be done. But its arguable that the others need not, and hence should not.
- * The reason they're here is that a module that intends to play with the
- * latest perls should be able to work the same in all releases. An example is
- * that perl no longer accepts any UV for a code point, but limits them to
- * IV_MAX or below. This is for future internal use of the larger code points.
- * If it turns out that some of these changes are breaking code that isn't
- * intended to work with modern perls, the tighter restrictions could be
- * relaxed. khw thinks this is unlikely, but has been wrong in the past. */
-
-/* 5.6.0 is the first release with UTF-8, and we don't implement this function
- * there due to its likely lack of still being in use, and the underlying
- * implementation is very different from later ones, without the later
- * safeguards, so would require extra work to deal with */
-#if { VERSION >= 5.6.1 } && ! defined(utf8_to_uvchr_buf)
- /* Choose which underlying implementation to use. At least one must be
- * present or the perl is too early to handle this function */
-# if defined(utf8n_to_uvchr) || defined(utf8_to_uv)
-# if defined(utf8n_to_uvchr) /* This is the preferred implementation */
-# define D_PPP_utf8_to_uvchr_buf_callee utf8n_to_uvchr
-# else /* Must be at least 5.6.1 from #if above */
-# define D_PPP_utf8_to_uvchr_buf_callee(s, curlen, retlen, flags) utf8_to_uv((U8 *)(s), (curlen), (retlen), (flags))
-# endif
-# endif
-
-# if { NEED utf8_to_uvchr_buf }
-
-UV
-utf8_to_uvchr_buf(pTHX_ const U8 *s, const U8 *send, STRLEN *retlen)
-{
- UV ret;
- STRLEN curlen;
- bool overflows = 0;
- const U8 *cur_s = s;
- const bool do_warnings = ckWARN_d(WARN_UTF8);
-# if { VERSION < 5.26.0 } && ! defined(EBCDIC)
- STRLEN overflow_length = 0;
-# endif
-
- if (send > s) {
- curlen = send - s;
- }
- else {
- assert(0); /* Modern perls die under this circumstance */
- curlen = 0;
- if (! do_warnings) { /* Handle empty here if no warnings needed */
- if (retlen) *retlen = 0;
- return UNICODE_REPLACEMENT;
- }
- }
-
-# if { VERSION < 5.26.0 } && ! defined(EBCDIC)
-
- /* Perl did not properly detect overflow for much of its history on
- * non-EBCDIC platforms, often returning an overlong value which may or may
- * not have been tolerated in the call. Also, earlier versions, when they
- * did detect overflow, may have disallowed it completely. Modern ones can
- * replace it with the REPLACEMENT CHARACTER, depending on calling
- * parameters. Therefore detect it ourselves in releases it was
- * problematic in. */
-
- if (curlen > 0 && UNLIKELY(*s >= 0xFE)) {
-
- /* First, on a 32-bit machine the first byte being at least \xFE
- * automatically is overflow, as it indicates something requiring more
- * than 31 bits */
- if (sizeof(ret) < 8) {
- overflows = 1;
- overflow_length = 7;
- }
- else {
- const U8 highest[] = /* 2*63-1 */
- "\xFF\x80\x87\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF";
- const U8 *cur_h = highest;
-
- for (cur_s = s; cur_s < send; cur_s++, cur_h++) {
- if (UNLIKELY(*cur_s == *cur_h)) {
- continue;
- }
-
- /* If this byte is larger than the corresponding highest UTF-8
- * byte, the sequence overflows; otherwise the byte is less
- * than (as we handled the equality case above), and so the
- * sequence doesn't overflow */
- overflows = *cur_s > *cur_h;
- break;
-
- }
-
- /* Here, either we set the bool and broke out of the loop, or got
- * to the end and all bytes are the same which indicates it doesn't
- * overflow. If it did overflow, it would be this number of bytes
- * */
- overflow_length = 13;
- }
- }
-
- if (UNLIKELY(overflows)) {
- ret = 0;
-
- if (! do_warnings && retlen) {
- *retlen = overflow_length;
- }
- }
- else
-
-# endif /* < 5.26 */
-
- /* Here, we are either in a release that properly detects overflow, or
- * we have checked for overflow and the next statement is executing as
- * part of the above conditional where we know we don't have overflow.
- *
- * The modern versions allow anything that evaluates to a legal UV, but
- * not overlongs nor an empty input */
- ret = D_PPP_utf8_to_uvchr_buf_callee(
- s, curlen, retlen, (UTF8_ALLOW_ANYUV
- & ~(UTF8_ALLOW_LONG|UTF8_ALLOW_EMPTY)));
-
-# if { VERSION >= 5.26.0 } && { VERSION < 5.28.0 }
-
- /* But actually, more modern versions restrict the UV to being no more than
- * what * an IV can hold, so it could, so it could still have gotten it
- * wrong about overflowing. */
- if (UNLIKELY(ret > IV_MAX)) {
- overflows = 1;
- }
-
-# endif
-
- if (UNLIKELY(overflows)) {
- if (! do_warnings) {
- if (retlen) {
- *retlen = D_PPP_MIN(*retlen, UTF8SKIP(s));
- *retlen = D_PPP_MIN(*retlen, curlen);
- }
- return UNICODE_REPLACEMENT;
- }
- else {
-
- /* We use the error message in use from 5.8-5.26 */
- Perl_warner(aTHX_ packWARN(WARN_UTF8),
- "Malformed UTF-8 character (overflow at 0x%" UVxf
- ", byte 0x%02x, after start byte 0x%02x)",
- ret, *cur_s, *s);
- if (retlen) {
- *retlen = (STRLEN) -1;
- }
- return 0;
- }
- }
-
- /* Here, did not overflow, but if it failed for some other reason, and
- * warnings are off, to emulate the behavior of the real utf8_to_uvchr(),
- * try again, allowing anything. (Note a return of 0 is ok if the input
- * was '\0') */
- if (UNLIKELY(ret == 0 && (curlen == 0 || *s != '\0'))) {
-
- /* If curlen is 0, we already handled the case where warnings are
- * disabled, so this 'if' will be true, and so later on, we know that
- * 's' is dereferencible */
- if (do_warnings) {
- *retlen = (STRLEN) -1;
- }
- else {
- ret = D_PPP_utf8_to_uvchr_buf_callee(
- s, curlen, retlen, UTF8_ALLOW_ANY);
- /* Override with the REPLACEMENT character, as that is what the
- * modern version of this function returns */
- ret = UNICODE_REPLACEMENT;
-
-# if { VERSION < 5.16.0 }
-
- /* Versions earlier than this don't necessarily return the proper
- * length. It should not extend past the end of string, nor past
- * what the first byte indicates the length is, nor past the
- * continuation characters */
- if (retlen && *retlen >= 0) {
- unsigned int i = 1;
-
- *retlen = D_PPP_MIN(*retlen, curlen);
- *retlen = D_PPP_MIN(*retlen, UTF8SKIP(s));
- do {
- if (s[i] < 0x80 || s[i] > 0xBF) {
- *retlen = i;
- break;
- }
- } while (++i < *retlen);
- }
-
-# endif
-
- }
- }
-
- return ret;
-}
-
-# endif
-#endif
-
-#if defined(UTF8SKIP) && defined(utf8_to_uvchr_buf)
-#undef utf8_to_uvchr /* Always redefine this unsafe function so that it refuses
- to read past a NUL, making it much less likely to read
- off the end of the buffer. A NUL indicates the start
- of the next character anyway. If the input isn't
- NUL-terminated, the function remains unsafe, as it
- always has been. */
-
-__UNDEFINED__ utf8_to_uvchr(s, lp) \
- ((*(s) == '\0') \
- ? utf8_to_uvchr_buf(s,((s)+1), lp) /* Handle single NUL specially */ \
- : utf8_to_uvchr_buf(s, (s) + my_strnlen((char *) (s), UTF8SKIP(s)), (lp)))
-
-#endif
-
=xsinit
#define NEED_my_strnlen
-#define NEED_utf8_to_uvchr_buf
=xsubs
ok(&Devel::PPPort::PUSHu(), 42);
ok(&Devel::PPPort::XPUSHu(), 43);
ok(&Devel::PPPort::my_strnlen("abc\0def", 7), 3);
-
-# skip tests on 5.6.0 and earlier
-if ("$]" le '5.006') {
- skip 'skip: broken utf8 support', 0 for 1..51;
- exit;
-}
-
-ok(&Devel::PPPort::UTF8_SAFE_SKIP("A", 0), 1);
-ok(&Devel::PPPort::UTF8_SAFE_SKIP("A", -1), 0);
-
-my $ret = &Devel::PPPort::utf8_to_uvchr("A");
-ok($ret->[0], ord("A"));
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr("\0");
-ok($ret->[0], 0);
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr_buf("A", 0);
-ok($ret->[0], ord("A"));
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr_buf("\0", 0);
-ok($ret->[0], 0);
-ok($ret->[1], 1);
-
-if (ord("A") != 65) { # tests not valid for EBCDIC
- ok(1, 1) for 1 .. (2 + 4 + (7 * 5));
-}
-else {
- $ret = &Devel::PPPort::utf8_to_uvchr_buf("\xc4\x80", 0);
- ok($ret->[0], 0x100);
- ok($ret->[1], 2);
-
- my @warnings;
- local $SIG{__WARN__} = sub { push @warnings, @_; };
-
- {
- BEGIN { 'warnings'->import('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
- ok($ret->[0], 0);
- ok($ret->[1], -1);
-
- BEGIN { 'warnings'->unimport() if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
- ok($ret->[0], 0xFFFD);
- ok($ret->[1], 1);
- }
-
- my @buf_tests = (
- {
- input => "A",
- adjustment => -1,
- warning => qr/empty/,
- no_warnings_returned_length => 0,
- },
- {
- input => "\xc4\xc5",
- adjustment => 0,
- warning => qr/non-continuation/,
- no_warnings_returned_length => 1,
- },
- {
- input => "\xc4\x80",
- adjustment => -1,
- warning => qr/short|1 byte, need 2/,
- no_warnings_returned_length => 1,
- },
- {
- input => "\xc0\x81",
- adjustment => 0,
- warning => qr/overlong|2 bytes, need 1/,
- no_warnings_returned_length => 2,
- },
- {
- input => "\xe0\x80\x81",
- adjustment => 0,
- warning => qr/overlong|3 bytes, need 1/,
- no_warnings_returned_length => 3,
- },
- {
- input => "\xf0\x80\x80\x81",
- adjustment => 0,
- warning => qr/overlong|4 bytes, need 1/,
- no_warnings_returned_length => 4,
- },
- { # Old algorithm failed to detect this
- input => "\xff\x80\x90\x90\x90\xbf\xbf\xbf\xbf\xbf\xbf\xbf\xbf",
- adjustment => 0,
- warning => qr/overflow/,
- no_warnings_returned_length => 13,
- },
- );
-
- # An empty input is an assertion failure on debugging builds. It is
- # deliberately the first test.
- require Config; import Config;
- use vars '%Config';
- if ($Config{ccflags} =~ /-DDEBUGGING/
- || $^O eq 'VMS' && $Config{usedebugging_perl} eq 'Y') {
- shift @buf_tests;
- ok(1, 1) for 1..5;
- }
-
- for my $test (@buf_tests) {
- my $input = $test->{'input'};
- my $adjustment = $test->{'adjustment'};
- my $display = 'utf8_to_uvchr_buf("';
- for (my $i = 0; $i < length($input) + $adjustment; $i++) {
- $display .= sprintf "\\x%02x", ord substr($input, $i, 1);
- }
-
- $display .= '")';
- my $warning = $test->{'warning'};
-
- undef @warnings;
- BEGIN { 'warnings'->import('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
- ok($ret->[0], 0, "returned value $display; warnings enabled");
- ok($ret->[1], -1, "returned length $display; warnings enabled");
- my $all_warnings = join "; ", @warnings;
- my $contains = grep { $_ =~ $warning } $all_warnings;
- ok($contains, 1, $display
- . "; Got: '$all_warnings', which should contain '$warning'");
-
- undef @warnings;
- BEGIN { 'warnings'->unimport('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
- ok($ret->[0], 0xFFFD, "returned value $display; warnings disabled");
- ok($ret->[1], $test->{'no_warnings_returned_length'},
- "returned length $display; warnings disabled");
- }
-}
ok(&Devel::PPPort::XPUSHu(), 43);
ok(&Devel::PPPort::my_strnlen("abc\0def", 7), 3);
-# skip tests on 5.6.0 and earlier
-if ("$]" le '5.006') {
- skip 'skip: broken utf8 support', 0 for 1..51;
- exit;
-}
-
-ok(&Devel::PPPort::UTF8_SAFE_SKIP("A", 0), 1);
-ok(&Devel::PPPort::UTF8_SAFE_SKIP("A", -1), 0);
-
-my $ret = &Devel::PPPort::utf8_to_uvchr("A");
-ok($ret->[0], ord("A"));
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr("\0");
-ok($ret->[0], 0);
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr_buf("A", 0);
-ok($ret->[0], ord("A"));
-ok($ret->[1], 1);
-
-$ret = &Devel::PPPort::utf8_to_uvchr_buf("\0", 0);
-ok($ret->[0], 0);
-ok($ret->[1], 1);
-
-if (ord("A") != 65) { # tests not valid for EBCDIC
- ok(1, 1) for 1 .. (2 + 4 + (7 * 5));
-}
-else {
- $ret = &Devel::PPPort::utf8_to_uvchr_buf("\xc4\x80", 0);
- ok($ret->[0], 0x100);
- ok($ret->[1], 2);
-
- my @warnings;
- local $SIG{__WARN__} = sub { push @warnings, @_; };
-
- {
- BEGIN { 'warnings'->import('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
- ok($ret->[0], 0);
- ok($ret->[1], -1);
-
- BEGIN { 'warnings'->unimport() if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr("\xe0\0\x80");
- ok($ret->[0], 0xFFFD);
- ok($ret->[1], 1);
- }
-
- my @buf_tests = (
- {
- input => "A",
- adjustment => -1,
- warning => qr/empty/,
- no_warnings_returned_length => 0,
- },
- {
- input => "\xc4\xc5",
- adjustment => 0,
- warning => qr/non-continuation/,
- no_warnings_returned_length => 1,
- },
- {
- input => "\xc4\x80",
- adjustment => -1,
- warning => qr/short|1 byte, need 2/,
- no_warnings_returned_length => 1,
- },
- {
- input => "\xc0\x81",
- adjustment => 0,
- warning => qr/overlong|2 bytes, need 1/,
- no_warnings_returned_length => 2,
- },
- {
- input => "\xe0\x80\x81",
- adjustment => 0,
- warning => qr/overlong|3 bytes, need 1/,
- no_warnings_returned_length => 3,
- },
- {
- input => "\xf0\x80\x80\x81",
- adjustment => 0,
- warning => qr/overlong|4 bytes, need 1/,
- no_warnings_returned_length => 4,
- },
- { # Old algorithm failed to detect this
- input => "\xff\x80\x90\x90\x90\xbf\xbf\xbf\xbf\xbf\xbf\xbf\xbf",
- adjustment => 0,
- warning => qr/overflow/,
- no_warnings_returned_length => 13,
- },
- );
-
- # An empty input is an assertion failure on debugging builds. It is
- # deliberately the first test.
- require Config; import Config;
- use vars '%Config';
- if ($Config{ccflags} =~ /-DDEBUGGING/
- || $^O eq 'VMS' && $Config{usedebugging_perl} eq 'Y') {
- shift @buf_tests;
- ok(1, 1) for 1..5;
- }
-
- for my $test (@buf_tests) {
- my $input = $test->{'input'};
- my $adjustment = $test->{'adjustment'};
- my $display = 'utf8_to_uvchr_buf("';
- for (my $i = 0; $i < length($input) + $adjustment; $i++) {
- $display .= sprintf "\\x%02x", ord substr($input, $i, 1);
- }
-
- $display .= '")';
- my $warning = $test->{'warning'};
-
- undef @warnings;
- BEGIN { 'warnings'->import('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
- ok($ret->[0], 0, "returned value $display; warnings enabled");
- ok($ret->[1], -1, "returned length $display; warnings enabled");
- my $all_warnings = join "; ", @warnings;
- my $contains = grep { $_ =~ $warning } $all_warnings;
- ok($contains, 1, $display
- . "; Got: '$all_warnings', which should contain '$warning'");
-
- undef @warnings;
- BEGIN { 'warnings'->unimport('utf8') if "$]" gt '5.006' }
- $ret = &Devel::PPPort::utf8_to_uvchr_buf($input, $adjustment);
- ok($ret->[0], 0xFFFD, "returned value $display; warnings disabled");
- ok($ret->[1], $test->{'no_warnings_returned_length'},
- "returned length $display; warnings disabled");
- }
-}
-