alignbytes='4'
aphostname='/bin/hostname'
api_revision='5'
-api_subversion='10'
-api_version='31'
-api_versionstring='5.31.10'
+api_subversion='0'
+api_version='32'
+api_versionstring='5.32.0'
ar='ar'
-archlib='/usr/lib/perl5/5.31.10/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.31.10/armv4l-linux'
+archlib='/usr/lib/perl5/5.32.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.32.0/armv4l-linux'
archname64=''
archname='armv4l-linux'
archobjs=''
cat='cat'
cc='cc'
cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.10/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.32.0/armv4l-linux/CORE'
ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccname='arm-linux-gcc'
inc_version_list_init='0'
incpath=''
inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.31.10/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.32.0/armv4l-linux'
installbin='./install_me_here/usr/bin'
installhtml1dir=''
installhtml3dir=''
installman3dir='./install_me_here/usr/share/man/man3'
installprefix='./install_me_here/usr'
installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.31.10'
+installprivlib='./install_me_here/usr/lib/perl5/5.32.0'
installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
installsitebin='./install_me_here/usr/bin'
installsitehtml1dir=''
installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.10'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.32.0'
installsiteman1dir='./install_me_here/usr/share/man/man1'
installsiteman3dir='./install_me_here/usr/share/man/man3'
installsitescript='./install_me_here/usr/bin'
pr=''
prefix='/usr'
prefixexp='/usr'
-privlib='/usr/lib/perl5/5.31.10'
-privlibexp='/usr/lib/perl5/5.31.10'
+privlib='/usr/lib/perl5/5.32.0'
+privlibexp='/usr/lib/perl5/5.32.0'
procselfexe='"/proc/self/exe"'
prototype='define'
ptrsize='4'
sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
sig_size='68'
signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
sitebin='/usr/bin'
sitebinexp='/usr/bin'
sitehtml1dir=''
sitehtml1direxp=''
sitehtml3dir=''
sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.31.10'
+sitelib='/usr/lib/perl5/site_perl/5.32.0'
sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.31.10'
+sitelibexp='/usr/lib/perl5/site_perl/5.32.0'
siteman1dir='/usr/share/man/man1'
siteman1direxp='/usr/share/man/man1'
siteman3dir='/usr/share/man/man3'
strerror_r_proto='0'
strings='/usr/include/string.h'
submit=''
-subversion='10'
+subversion='0'
sysman='/usr/share/man/man1'
tail=''
tar=''
vendorprefixexp=''
vendorscript=''
vendorscriptexp=''
-version='5.31.10'
-version_patchlevel_string='version 31 subversion 10'
+version='5.32.0'
+version_patchlevel_string='version 32 subversion 0'
versiononly='undef'
vi=''
xlibpth='/usr/lib/386 /lib/386'
config_args=''
config_argc=0
PERL_REVISION=5
-PERL_VERSION=31
-PERL_SUBVERSION=10
+PERL_VERSION=32
+PERL_SUBVERSION=0
PERL_API_REVISION=5
-PERL_API_VERSION=31
-PERL_API_SUBVERSION=10
+PERL_API_VERSION=32
+PERL_API_SUBVERSION=0
PERL_PATCHLEVEL=
PERL_CONFIG_SH=true
alignbytes='4'
aphostname='/bin/hostname'
api_revision='5'
-api_subversion='10'
-api_version='31'
-api_versionstring='5.31.10'
+api_subversion='0'
+api_version='32'
+api_versionstring='5.32.0'
ar='ar'
-archlib='/usr/lib/perl5/5.31.10/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.31.10/armv4l-linux'
+archlib='/usr/lib/perl5/5.32.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.32.0/armv4l-linux'
archname64=''
archname='armv4l-linux'
archobjs=''
cat='cat'
cc='arm-none-linux-gnueabi-gcc'
cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.10/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.32.0/armv4l-linux/CORE'
ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccname='arm-linux-gcc'
inc_version_list_init='0'
incpath=''
inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.31.10/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.32.0/armv4l-linux'
installbin='./install_me_here/usr/bin'
installhtml1dir=''
installhtml3dir=''
installman3dir='./install_me_here/usr/share/man/man3'
installprefix='./install_me_here/usr'
installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.31.10'
+installprivlib='./install_me_here/usr/lib/perl5/5.32.0'
installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
installsitebin='./install_me_here/usr/bin'
installsitehtml1dir=''
installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.10'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.32.0'
installsiteman1dir='./install_me_here/usr/share/man/man1'
installsiteman3dir='./install_me_here/usr/share/man/man3'
installsitescript='./install_me_here/usr/bin'
pr=''
prefix='/usr'
prefixexp='/usr'
-privlib='/usr/lib/perl5/5.31.10'
-privlibexp='/usr/lib/perl5/5.31.10'
+privlib='/usr/lib/perl5/5.32.0'
+privlibexp='/usr/lib/perl5/5.32.0'
procselfexe='"/proc/self/exe"'
prototype='define'
ptrsize='4'
sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
sig_size='68'
signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.31.10/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
sitebin='/usr/bin'
sitebinexp='/usr/bin'
sitehtml1dir=''
sitehtml1direxp=''
sitehtml3dir=''
sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.31.10'
+sitelib='/usr/lib/perl5/site_perl/5.32.0'
sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.31.10'
+sitelibexp='/usr/lib/perl5/site_perl/5.32.0'
siteman1dir='/usr/share/man/man1'
siteman1direxp='/usr/share/man/man1'
siteman3dir='/usr/share/man/man3'
strerror_r_proto='0'
strings='/usr/include/string.h'
submit=''
-subversion='10'
+subversion='0'
sysman='/usr/share/man/man1'
tail=''
tar=''
vendorprefixexp=''
vendorscript=''
vendorscriptexp=''
-version='5.31.10'
-version_patchlevel_string='version 31 subversion 10'
+version='5.32.0'
+version_patchlevel_string='version 32 subversion 0'
versiononly='undef'
vi=''
xlibpth='/usr/lib/386 /lib/386'
config_args=''
config_argc=0
PERL_REVISION=5
-PERL_VERSION=31
-PERL_SUBVERSION=10
+PERL_VERSION=32
+PERL_SUBVERSION=0
PERL_API_REVISION=5
-PERL_API_VERSION=31
-PERL_API_SUBVERSION=10
+PERL_API_VERSION=32
+PERL_API_SUBVERSION=0
PERL_PATCHLEVEL=
PERL_CONFIG_SH=true
=item Directories for the perl distribution
-By default, Configure will use the following directories for 5.31.10.
+By default, Configure will use the following directories for 5.32.0.
$version is the full perl version number, including subversion, e.g.
5.12.3, and $archname is a string like sun4-sunos,
determined by Configure. The full definitions of all Configure
=head1 Coexistence with earlier versions of perl 5
-Perl 5.31.10 is not binary compatible with earlier versions of Perl.
+Perl 5.32.0 is not binary compatible with earlier versions of Perl.
In other words, you will have to recompile your XS modules.
In general, you can usually safely upgrade from one stable version of Perl
libraries after 5.6.0, but not for executables. TODO?) One convenient
way to do this is by using a separate prefix for each version, such as
- sh Configure -Dprefix=/opt/perl5.31.10
+ sh Configure -Dprefix=/opt/perl5.32.0
-and adding /opt/perl5.31.10/bin to the shell PATH variable. Such users
+and adding /opt/perl5.32.0/bin to the shell PATH variable. Such users
may also wish to add a symbolic link /usr/local/bin/perl so that
scripts can still start with #!/usr/local/bin/perl.
=head2 Upgrading from 5.31.8 or earlier
-B<Perl 5.31.10 may not be binary compatible with Perl 5.31.8 or
+B<Perl 5.32.0 may not be binary compatible with Perl 5.31.8 or
earlier Perl releases.> Perl modules having binary parts
(meaning that a C compiler is used) will have to be recompiled to be
-used with 5.31.10. If you find you do need to rebuild an extension with
-5.31.10, you may safely do so without disturbing the older
+used with 5.32.0. If you find you do need to rebuild an extension with
+5.32.0, you may safely do so without disturbing the older
installations. (See L<"Coexistence with earlier versions of perl 5">
above.)
print("$f\n");
}
-in Linux with perl-5.31.10 is as follows (under $Config{prefix}):
+in Linux with perl-5.32.0 is as follows (under $Config{prefix}):
./bin/perl
- ./lib/perl5/5.31.10/strict.pm
- ./lib/perl5/5.31.10/warnings.pm
- ./lib/perl5/5.31.10/i686-linux/File/Glob.pm
- ./lib/perl5/5.31.10/feature.pm
- ./lib/perl5/5.31.10/XSLoader.pm
- ./lib/perl5/5.31.10/i686-linux/auto/File/Glob/Glob.so
+ ./lib/perl5/5.32.0/strict.pm
+ ./lib/perl5/5.32.0/warnings.pm
+ ./lib/perl5/5.32.0/i686-linux/File/Glob.pm
+ ./lib/perl5/5.32.0/feature.pm
+ ./lib/perl5/5.32.0/XSLoader.pm
+ ./lib/perl5/5.32.0/i686-linux/auto/File/Glob/Glob.so
Secondly, for perl-5.10.1, the Debian perl-base package contains 591
files, (of which 510 are for lib/unicore) totaling about 3.5MB in its
"vxs.inc"
]
},
- "release_status" : "unstable",
+ "release_status" : "stable",
"resources" : {
"bugtracker" : {
"web" : "https://github.com/Perl/perl5/issues"
"url" : "https://github.com/Perl/perl5"
}
},
- "version" : "5.031010",
+ "version" : "5.032000",
"x_serialization_backend" : "JSON::PP version 4.04"
}
homepage: https://www.perl.org/
license: https://dev.perl.org/licenses/
repository: https://github.com/Perl/perl5
-version: '5.031010'
+version: '5.032000'
x_serialization_backend: 'CPAN::Meta::YAML version 0.018'
$spitshell >>$Makefile <<'!NO!SUBS!'
-perltoc_pod_prereqs = extra.pods pod/perl53111delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5320delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
generated_headers = uudmap.h bitcount.h mg_data.h
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) pod/perlmodlib.PL -q
-pod/perl53111delta.pod: pod/perldelta.pod
- $(RMS) pod/perl53111delta.pod
- $(LNS) perldelta.pod pod/perl53111delta.pod
+pod/perl5320delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5320delta.pod
+ $(LNS) perldelta.pod pod/perl5320delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
# Here comes the CW tools - TO BE FILLED TO BUILD WITH CW -
-MODULE_DESC = "Perl 5.31.10 for NetWare"
+MODULE_DESC = "Perl 5.32.0 for NetWare"
CCTYPE = CodeWarrior
C_COMPILER = mwccnlm -c
CPP_COMPILER = mwccnlm
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER = \5.31.10
+INST_VER = \5.32.0
#
# Comment this out if you DON'T want your perl installation to have
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define ARCHLIB "c:\\perl\\5.31.10\\lib\\NetWare-x86-multi-thread" /**/
+#define ARCHLIB "c:\\perl\\5.32.0\\lib\\NetWare-x86-multi-thread" /**/
/*#define ARCHLIB_EXP "" /**/
/* ARCHNAME:
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
-#define BIN "c:\\perl\\5.31.10\\bin\\NetWare-x86-multi-thread" /**/
-#define BIN_EXP "c:\\perl\\5.31.10\\bin\\NetWare-x86-multi-thread" /**/
+#define BIN "c:\\perl\\5.32.0\\bin\\NetWare-x86-multi-thread" /**/
+#define BIN_EXP "c:\\perl\\5.32.0\\bin\\NetWare-x86-multi-thread" /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "c:\\perl\\site\\5.31.10\\lib\\NetWare-x86-multi-thread" /**/
+#define SITEARCH "c:\\perl\\site\\5.32.0\\lib\\NetWare-x86-multi-thread" /**/
/*#define SITEARCH_EXP "" /**/
/* SITELIB:
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "c:\\perl\\site\\5.31.10\\lib" /**/
+#define SITELIB "c:\\perl\\site\\5.32.0\\lib" /**/
/*#define SITELIB_EXP "" /**/
#define SITELIB_STEM "" /**/
alignbytes='8'
aphostname=''
api_revision='5'
-api_subversion='10'
-api_version='31'
-api_versionstring='5.31.10'
+api_subversion='0'
+api_version='32'
+api_versionstring='5.32.0'
ar='ar'
-archlib='/opt/perl/lib/5.31.10/x86_64-linux'
-archlibexp='/opt/perl/lib/5.31.10/x86_64-linux'
+archlib='/opt/perl/lib/5.32.0/x86_64-linux'
+archlibexp='/opt/perl/lib/5.32.0/x86_64-linux'
archname64=''
archname='x86_64-linux'
archobjs=''
incpth='/usr/lib/gcc/x86_64-linux-gnu/4.9/include /usr/local/include /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/include'
inews=''
initialinstalllocation='/opt/perl/bin'
-installarchlib='/opt/perl/lib/5.31.10/x86_64-linux'
+installarchlib='/opt/perl/lib/5.32.0/x86_64-linux'
installbin='/opt/perl/bin'
installhtml1dir=''
installhtml3dir=''
installman3dir='/opt/perl/man/man3'
installprefix='/opt/perl'
installprefixexp='/opt/perl'
-installprivlib='/opt/perl/lib/5.31.10'
+installprivlib='/opt/perl/lib/5.32.0'
installscript='/opt/perl/bin'
-installsitearch='/opt/perl/lib/site_perl/5.31.10/x86_64-linux'
+installsitearch='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
installsitebin='/opt/perl/bin'
installsitehtml1dir=''
installsitehtml3dir=''
-installsitelib='/opt/perl/lib/site_perl/5.31.10'
+installsitelib='/opt/perl/lib/site_perl/5.32.0'
installsiteman1dir='/opt/perl/man/man1'
installsiteman3dir='/opt/perl/man/man3'
installsitescript='/opt/perl/bin'
perl_static_inline='static __inline__'
perladmin='yourname@yourhost.yourplace.com'
perllibs='-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc'
-perlpath='/opt/perl/bin/perl5.31.10'
+perlpath='/opt/perl/bin/perl5.32.0'
pg='pg'
phostname=''
pidtype='pid_t'
pr=''
prefix='/opt/perl'
prefixexp='/opt/perl'
-privlib='/opt/perl/lib/5.31.10'
-privlibexp='/opt/perl/lib/5.31.10'
+privlib='/opt/perl/lib/5.32.0'
+privlibexp='/opt/perl/lib/5.32.0'
procselfexe='"/proc/self/exe"'
ptrsize='8'
quadkind='2'
sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 31, 0'
sig_size='69'
signal_t='void'
-sitearch='/opt/perl/lib/site_perl/5.31.10/x86_64-linux'
-sitearchexp='/opt/perl/lib/site_perl/5.31.10/x86_64-linux'
+sitearch='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
+sitearchexp='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
sitebin='/opt/perl/bin'
sitebinexp='/opt/perl/bin'
sitehtml1dir=''
sitehtml1direxp=''
sitehtml3dir=''
sitehtml3direxp=''
-sitelib='/opt/perl/lib/site_perl/5.31.10'
+sitelib='/opt/perl/lib/site_perl/5.32.0'
sitelib_stem='/opt/perl/lib/site_perl'
-sitelibexp='/opt/perl/lib/site_perl/5.31.10'
+sitelibexp='/opt/perl/lib/site_perl/5.32.0'
siteman1dir='/opt/perl/man/man1'
siteman1direxp='/opt/perl/man/man1'
siteman3dir='/opt/perl/man/man3'
ssizetype='ssize_t'
st_ino_sign='1'
st_ino_size='8'
-startperl='#!/opt/perl/bin/perl5.31.10'
+startperl='#!/opt/perl/bin/perl5.32.0'
startsh='#!/bin/sh'
static_ext=' '
stdchar='char'
stdio_stream_array=''
strerror_r_proto='0'
submit=''
-subversion='10'
+subversion='0'
sysman='/usr/share/man/man1'
sysroot=''
tail=''
vendorprefixexp=''
vendorscript=''
vendorscriptexp=''
-version='5.31.10'
-version_patchlevel_string='version 31 subversion 10'
+version='5.32.0'
+version_patchlevel_string='version 32 subversion 0'
versiononly='define'
vi=''
xlibpth='/usr/lib/386 /lib/386'
zcat=''
zip='zip'
PERL_REVISION=5
-PERL_VERSION=31
-PERL_SUBVERSION=10
+PERL_VERSION=32
+PERL_SUBVERSION=0
PERL_API_REVISION=5
-PERL_API_VERSION=31
-PERL_API_SUBVERSION=10
+PERL_API_VERSION=32
+PERL_API_SUBVERSION=0
PERL_PATCHLEVEL=''
PERL_CONFIG_SH=true
: Variables propagated from previous config.sh file.
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define ARCHLIB "/opt/perl/lib/5.31.10/x86_64-linux" /**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.31.10/x86_64-linux" /**/
+#define ARCHLIB "/opt/perl/lib/5.32.0/x86_64-linux" /**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.32.0/x86_64-linux" /**/
/* BIN:
* This symbol holds the path of the bin directory where the package will
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/opt/perl/lib/5.31.10" /**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.31.10" /**/
+#define PRIVLIB "/opt/perl/lib/5.32.0" /**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.32.0" /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "/opt/perl/lib/site_perl/5.31.10/x86_64-linux" /**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.31.10/x86_64-linux" /**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.32.0/x86_64-linux" /**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.32.0/x86_64-linux" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "/opt/perl/lib/site_perl/5.31.10" /**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.31.10" /**/
+#define SITELIB "/opt/perl/lib/site_perl/5.32.0" /**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.32.0" /**/
#define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
/* PERL_VENDORARCH:
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
-#define STARTPERL "#!/opt/perl/bin/perl5.31.10" /**/
+#define STARTPERL "#!/opt/perl/bin/perl5.32.0" /**/
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
XXX Generate this with:
- perl Porting/acknowledgements.pl v5.31.10..HEAD
+ perl Porting/acknowledgements.pl v5.32.0..HEAD
=head1 Reporting Bugs
Make perl executable and create a symlink for libperl:
chmod a+x /boot/common/bin/perl
- cd /boot/common/lib; ln -s perl5/5.31.10/BePC-haiku/CORE/libperl.so .
+ cd /boot/common/lib; ln -s perl5/5.32.0/BePC-haiku/CORE/libperl.so .
-Replace C<5.31.10> with your respective version of Perl.
+Replace C<5.32.0> with your respective version of Perl.
=head1 KNOWN PROBLEMS
This document briefly describes Perl under Mac OS X.
- curl -O https://www.cpan.org/src/perl-5.31.10.tar.gz
- tar -xzf perl-5.31.10.tar.gz
- cd perl-5.31.10
+ curl -O https://www.cpan.org/src/perl-5.32.0.tar.gz
+ tar -xzf perl-5.32.0.tar.gz
+ cd perl-5.32.0
./Configure -des -Dprefix=/usr/local/
make
make test
=head1 DESCRIPTION
-The latest Perl release (5.31.10 as of this writing) builds without changes
+The latest Perl release (5.32.0 as of this writing) builds without changes
under all versions of Mac OS X from 10.3 "Panther" onwards.
In order to build your own version of Perl you will need 'make',
=item Additional Perl modules
- unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.31.10/
+ unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.32.0/
Same remark as above applies. Additionally, if this directory is not
one of directories on @INC (and @INC is influenced by C<PERLLIB_PREFIX>), you
Updated 28 November 2001 for broken URLs.
-Updated 03 October 2019 for perl-5.31.10+
+Updated 03 October 2019 for perl-5.32.0+
=cut
choice. Once you have done so, use a command like the following to
unpack the archive:
- vmstar -xvf perl-5^.31^.10.tar
+ vmstar -xvf perl-5^.32^.0.tar
Then set default to the top-level source directory like so:
- set default [.perl-5^.31^.10]
+ set default [.perl-5^.32^.0]
and proceed with configuration as described in the next section.
Type "dmake" ("gmake" for GNU make, or "nmake" if you are using that make).
This should build everything. Specifically, it will create perl.exe,
-perl531.dll at the perl toplevel, and various other extension dll's
+perl532.dll at the perl toplevel, and various other extension dll's
under the lib\auto directory. If the build fails for any reason, make
sure you have done the previous steps correctly.
# mkdir -p /opt/perl-catamount
# mkdir -p /opt/perl-catamount/include
# mkdir -p /opt/perl-catamount/lib
-# mkdir -p /opt/perl-catamount/lib/perl5/5.31.10
+# mkdir -p /opt/perl-catamount/lib/perl5/5.32.0
# mkdir -p /opt/perl-catamount/bin
# cp *.h /opt/perl-catamount/include
# cp libperl.a /opt/perl-catamount/lib
-# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.31.10
+# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.32.0
# cp miniperl perl run.sh cc.sh /opt/perl-catamount/lib
#
# With the headers and the libperl.a you can embed Perl to your Catamount
our %bits;
-our $VERSION = "5.031010";
+our $VERSION = "5.032000";
$bits{$_}{3} = 'OPpENTERSUB_AMPER' for qw(entersub rv2cv);
$bits{$_}{6} = 'OPpENTERSUB_DB' for qw(entersub rv2cv);
* exactly on the third column */
#define PERL_REVISION 5 /* age */
-#define PERL_VERSION 31 /* epoch */
-#define PERL_SUBVERSION 10 /* generation */
+#define PERL_VERSION 32 /* epoch */
+#define PERL_SUBVERSION 0 /* generation */
/* The following numbers describe the earliest compatible version of
Perl ("compatibility" here being defined as sufficient binary/API
changing them should not be necessary.
*/
#define PERL_API_REVISION 5
-#define PERL_API_VERSION 31
-#define PERL_API_SUBVERSION 10
+#define PERL_API_VERSION 32
+#define PERL_API_SUBVERSION 0
/*
XXX Note: The selection of non-default Configure options, such
as -Duselonglong may invalidate these settings. Currently, Configure
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/sys/lib/perl/5.31.10" /**/
-#define PRIVLIB_EXP "/sys/lib/perl/5.31.10" /**/
+#define PRIVLIB "/sys/lib/perl/5.32.0" /**/
+#define PRIVLIB_EXP "/sys/lib/perl/5.32.0" /**/
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "/sys/lib/perl/5.31.10/site_perl" /**/
-#define SITELIB_EXP "/sys/lib/perl/5.31.10/site_perl" /**/
-#define SITELIB_STEM "/sys/lib/perl/5.31.10/site_perl" /**/
+#define SITELIB "/sys/lib/perl/5.32.0/site_perl" /**/
+#define SITELIB_EXP "/sys/lib/perl/5.32.0/site_perl" /**/
+#define SITELIB_STEM "/sys/lib/perl/5.32.0/site_perl" /**/
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
alignbytes='4'
aphostname='/bin/uname -n'
api_revision='5'
-api_subversion='10'
-api_version='31'
-api_versionstring='5.31.10'
+api_subversion='0'
+api_version='32'
+api_versionstring='5.32.0'
ar='ar'
-archlib='/sys/lib/perl5/5.31.10/386'
-archlibexp='/sys/lib/perl5/5.31.10/386'
+archlib='/sys/lib/perl5/5.32.0/386'
+archlibexp='/sys/lib/perl5/5.32.0/386'
archname64=''
archname='386'
archobjs=''
inc_version_list_init='0'
incpath=''
inews=''
-installarchlib='/sys/lib/perl/5.31.10/386'
+installarchlib='/sys/lib/perl/5.32.0/386'
installbin='/usr/bin'
installman1dir='/sys/man/1pub'
installman3dir='/sys/man/2pub'
installprefix='/usr'
installprefixexp='/usr'
-installprivlib='/sys/lib/perl/5.31.10'
+installprivlib='/sys/lib/perl/5.32.0'
installscript='/usr/bin'
-installsitearch='/sys/lib/perl/5.31.10/site_perl/386'
+installsitearch='/sys/lib/perl/5.32.0/site_perl/386'
installsitebin='/usr/bin'
-installsitelib='/sys/lib/perl/5.31.10/site_perl'
+installsitelib='/sys/lib/perl/5.32.0/site_perl'
installstyle='lib/perl5'
installusrbinperl='undef'
installvendorarch=''
pr=''
prefix='/usr'
prefixexp='/usr'
-privlib='/sys/lib/perl/5.31.10'
-privlibexp='/sys/lib/perl/5.31.10'
+privlib='/sys/lib/perl/5.32.0'
+privlibexp='/sys/lib/perl/5.32.0'
procselfexe=''
prototype='define'
ptrsize='4'
sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 0'
sig_size='50'
signal_t='void'
-sitearch='/sys/lib/perl/5.31.10/site_perl/386'
+sitearch='/sys/lib/perl/5.32.0/site_perl/386'
sitearchexp='/sys/lib/perl/site_perl/386'
sitebin='/usr/bin'
sitebinexp='/usr/bin'
-sitelib='/sys/lib/perl/5.31.10/site_perl'
-sitelib_stem='/sys/lib/perl/5.31.10/site_perl'
-sitelibexp='/sys/lib/perl/5.31.10/site_perl'
+sitelib='/sys/lib/perl/5.32.0/site_perl'
+sitelib_stem='/sys/lib/perl/5.32.0/site_perl'
+sitelibexp='/sys/lib/perl/5.32.0/site_perl'
siteprefix='/usr'
siteprefixexp='/usr'
sizesize='4'
strerror_r_proto='0'
strings='/sys/include/ape/string.h'
submit=''
-subversion='10'
+subversion='0'
sysman='/sys/man/1pub'
tail=''
tar=''
vendorlibexp=''
vendorprefix=''
vendorprefixexp=''
-version='5.31.10'
-version_patchlevel_string='version 31 subversion 10'
+version='5.32.0'
+version_patchlevel_string='version 32 subversion 0'
versiononly='undef'
vi=''
xlibpth=''
config_args=''
config_argc=0
PERL_REVISION=5
-PERL_VERSION=31
-PERL_SUBVERSION=10
+PERL_VERSION=32
+PERL_SUBVERSION=0
PERL_API_REVISION=5
-PERL_API_VERSION=31
-PERL_API_SUBVERSION=10
+PERL_API_VERSION=32
+PERL_API_SUBVERSION=0
PERL_PATCHLEVEL=
PERL_CONFIG_SH=true
/roffitall
# generated
-/perl53111delta.pod
+/perl5320delta.pod
/perlapi.pod
/perlintern.pod
/perlmodlib.pod
[ this is a template for a new perldelta file. Any text flagged as XXX needs
to be processed before release. ]
-perldelta - what is new for perl v5.31.11
+perldelta - what is new for perl v5.32.0
=head1 DESCRIPTION
-This document describes differences between the 5.31.10 release and the 5.31.11
+This document describes differences between the 5.30.0 release and the 5.32.0
release.
-If you are upgrading from an earlier release such as 5.31.9, first read
-L<perl53110delta>, which describes differences between 5.31.9 and 5.31.10.
+If you are upgrading from an earlier release such as 5.28.0, first read
+L<perl5300delta>, which describes differences between 5.28.0 and 5.30.0.
=head1 Notice
XXX Generate this with:
- perl Porting/acknowledgements.pl v5.31.10..HEAD
+ perl Porting/acknowledgements.pl v5.30.0..HEAD
=head1 Reporting Bugs
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define ARCHLIB "/usr/local/lib/perl5/5.31/unknown" / **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.31/unknown" / **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.32/unknown" / **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.32/unknown" / **/
/* BIN:
* This symbol holds the path of the bin directory where the package will
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "/usr/local/lib/perl5/5.31" /**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.31" /**/
+#define PRIVLIB "/usr/local/lib/perl5/5.32" /**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.32" /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define SITEARCH "/usr/local/lib/perl5/5.31/unknown" / **/
-/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.31/unknown" / **/
+/*#define SITEARCH "/usr/local/lib/perl5/5.32/unknown" / **/
+/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.32/unknown" / **/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "/usr/local/lib/perl5/5.31" /**/
-#define SITELIB_EXP "/usr/local/lib/perl5/5.31" /**/
+#define SITELIB "/usr/local/lib/perl5/5.32" /**/
+#define SITELIB_EXP "/usr/local/lib/perl5/5.32" /**/
#define SITELIB_STEM "/usr/local/lib/perl5" /**/
/* PERL_VENDORARCH:
/* Generated from:
* 8762a3dfdfab48d1fe29cf7b27dfa150e1eec38b0d1f0f441d7cd9f5abef7dc8 config_h.SH
- * 31c25f95118efbf99e358f81091058e6723b4cccb8474dfbc6d06c2b7d46ff17 uconfig.sh
+ * b670e913e6b370b8d4d90fcd8a22d307db351699bb065fffef93b5f8418db06c uconfig.sh
* ex: set ro: */
afsroot='/afs'
alignbytes='4'
aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.31/unknown'
-archlibexp='/usr/local/lib/perl5/5.31/unknown'
+archlib='/usr/local/lib/perl5/5.32/unknown'
+archlibexp='/usr/local/lib/perl5/5.32/unknown'
archname='unknown'
asctime_r_proto='0'
bin='/usr/local/bin'
perl_static_inline='static'
phostname='hostname'
pidtype=int
-privlib='/usr/local/lib/perl5/5.31'
-privlibexp='/usr/local/lib/perl5/5.31'
+privlib='/usr/local/lib/perl5/5.32'
+privlibexp='/usr/local/lib/perl5/5.32'
procselfexe=''
prototype='undef'
ptrsize='4'
sig_num_init='0'
sig_size='1'
signal_t=int
-sitearch='/usr/local/lib/perl5/5.31/unknown'
-sitearchexp='/usr/local/lib/perl5/5.31/unknown'
-sitelib='/usr/local/lib/perl5/5.31'
+sitearch='/usr/local/lib/perl5/5.32/unknown'
+sitearchexp='/usr/local/lib/perl5/5.32/unknown'
+sitelib='/usr/local/lib/perl5/5.32'
sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.31'
+sitelibexp='/usr/local/lib/perl5/5.32'
sizesize=4
sizetype='size_t'
socksizetype='int'
afsroot='/afs'
alignbytes='8'
aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.31/unknown'
-archlibexp='/usr/local/lib/perl5/5.31/unknown'
+archlib='/usr/local/lib/perl5/5.32/unknown'
+archlibexp='/usr/local/lib/perl5/5.32/unknown'
archname='unknown64'
asctime_r_proto='0'
bin='/usr/local/bin'
perl_static_inline='static'
phostname='hostname'
pidtype=int
-privlib='/usr/local/lib/perl5/5.31'
-privlibexp='/usr/local/lib/perl5/5.31'
+privlib='/usr/local/lib/perl5/5.32'
+privlibexp='/usr/local/lib/perl5/5.32'
procselfexe=''
prototype='undef'
ptrsize='8'
sig_num_init='0'
sig_size='1'
signal_t=int
-sitearch='/usr/local/lib/perl5/5.31/unknown'
-sitearchexp='/usr/local/lib/perl5/5.31/unknown'
-sitelib='/usr/local/lib/perl5/5.31'
+sitearch='/usr/local/lib/perl5/5.32/unknown'
+sitearchexp='/usr/local/lib/perl5/5.32/unknown'
+sitelib='/usr/local/lib/perl5/5.32'
sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.31'
+sitelibexp='/usr/local/lib/perl5/5.32'
sizesize=4
sizetype='size_t'
socksizetype='int'
extra.pods : miniperl
@ @extra_pods.com
-PERLDELTA_CURRENT = [.pod]perl53111delta.pod
+PERLDELTA_CURRENT = [.pod]perl5320delta.pod
$(PERLDELTA_CURRENT) : [.pod]perldelta.pod
Copy/NoConfirm/Log $(MMS$SOURCE) $(PERLDELTA_CURRENT)
# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl531.dll). Also makes individual DLLs for the XS extensions.
+# (perl532.dll). Also makes individual DLLs for the XS extensions.
#
# The easiest way to customize the build process is to use parameters like this:
#
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER := \5.31.10
+#INST_VER := \5.32.0
#
# Comment this out if you DON'T want your perl installation to have
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl531s.lib will also be created.
+# variables below. A static library perl532s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC := define
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = $(COREDIR)\libperl531$(a)
-PERLIMPLIBBASE = libperl531$(a)
-PERLSTATICLIB = ..\libperl531s$(a)
+PERLIMPLIB = $(COREDIR)\libperl532$(a)
+PERLIMPLIBBASE = libperl532$(a)
+PERLSTATICLIB = ..\libperl532s$(a)
INT64 = long long
else
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB ?= $(COREDIR)\perl531$(a)
-PERLIMPLIBBASE ?= perl531$(a)
-PERLEXPLIB ?= $(COREDIR)\perl531.exp
-PERLSTATICLIB ?= ..\perl531s$(a)
-PERLDLL = ..\perl531.dll
-PERLDLLBASE = perl531.dll
+PERLIMPLIB ?= $(COREDIR)\perl532$(a)
+PERLIMPLIBBASE ?= perl532$(a)
+PERLEXPLIB ?= $(COREDIR)\perl532.exp
+PERLSTATICLIB ?= ..\perl532s$(a)
+PERLDLL = ..\perl532.dll
+PERLDLLBASE = perl532.dll
# don't let "gmake -n all" try to run "miniperl.exe make_ext.pl"
PLMAKE = gmake
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl53111delta.pod
+ copy ..\pod\perldelta.pod ..\pod\perl5320delta.pod
$(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
$(MINIPERL) -I..\lib ..\autodoc.pl ..
$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat roffitall \
- perl53111delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+ perl5320delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl531.dll). Also makes individual DLLs for the XS extensions.
+# (perl532.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.31.10
+#INST_VER = \5.32.0
#
# Comment this out if you DON'T want your perl installation to have
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl531s.lib will also be created.
+# variables below. A static library perl532s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC = define
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB = ..\perl531.lib
-PERLSTATICLIB = ..\perl531s.lib
-PERLDLL = ..\perl531.dll
+PERLIMPLIB = ..\perl532.lib
+PERLSTATICLIB = ..\perl532s.lib
+PERLDLL = ..\perl532.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl53111delta.pod
+ copy ..\pod\perldelta.pod ..\pod\perl5320delta.pod
cd ..\win32
$(PERLEXE) $(PL2BAT) $(UTILS)
$(MINIPERL) -I..\lib ..\autodoc.pl ..
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat roffitall \
- perl53111delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+ perl5320delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
# Windows SDK 64-bit compiler and tools
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl531.dll). Also makes individual DLLs for the XS extensions.
+# (perl532.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.31.10
+#INST_VER *= \5.32.0
#
# Comment this out if you DON'T want your perl installation to have
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl531s.lib will also be created.
+# variables below. A static library perl532s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC *= define
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = $(COREDIR)\libperl531$(a)
-PERLSTATICLIB = ..\libperl531s$(a)
+PERLIMPLIB = $(COREDIR)\libperl532$(a)
+PERLSTATICLIB = ..\libperl532s$(a)
INT64 = long long
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= $(COREDIR)\perl531$(a)
-PERLEXPLIB *= $(COREDIR)\perl531.exp
-PERLSTATICLIB *= ..\perl531s$(a)
-PERLDLL = ..\perl531.dll
-PERLDLLBASE = perl531.dll
+PERLIMPLIB *= $(COREDIR)\perl532$(a)
+PERLEXPLIB *= $(COREDIR)\perl532.exp
+PERLSTATICLIB *= ..\perl532s$(a)
+PERLDLL = ..\perl532.dll
+PERLDLLBASE = perl532.dll
#EUMM on Win32 isn't ready for parallel make, so only allow this file to be parallel
#$(MAKE) will contain the -P that this makefile was called with, which is bad for
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perldelta.pod ..\pod\perl53111delta.pod
+ copy ..\pod\perldelta.pod ..\pod\perl5320delta.pod
$(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
$(MINIPERL) -I..\lib ..\autodoc.pl ..
$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat roffitall \
- perl53111delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+ perl5320delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
perl5302delta.pod \
perl5310delta.pod \
perl53110delta.pod \
- perl53111delta.pod \
perl5311delta.pod \
perl5312delta.pod \
perl5313delta.pod \
perl5317delta.pod \
perl5318delta.pod \
perl5319delta.pod \
+ perl5320delta.pod \
perl561delta.pod \
perl56delta.pod \
perl581delta.pod \
perl5302delta.man \
perl5310delta.man \
perl53110delta.man \
- perl53111delta.man \
perl5311delta.man \
perl5312delta.man \
perl5313delta.man \
perl5317delta.man \
perl5318delta.man \
perl5319delta.man \
+ perl5320delta.man \
perl561delta.man \
perl56delta.man \
perl581delta.man \
perl5302delta.html \
perl5310delta.html \
perl53110delta.html \
- perl53111delta.html \
perl5311delta.html \
perl5312delta.html \
perl5313delta.html \
perl5317delta.html \
perl5318delta.html \
perl5319delta.html \
+ perl5320delta.html \
perl561delta.html \
perl56delta.html \
perl581delta.html \
perl5302delta.tex \
perl5310delta.tex \
perl53110delta.tex \
- perl53111delta.tex \
perl5311delta.tex \
perl5312delta.tex \
perl5313delta.tex \
perl5317delta.tex \
perl5318delta.tex \
perl5319delta.tex \
+ perl5320delta.tex \
perl561delta.tex \
perl56delta.tex \
perl581delta.tex \