X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/dc750f2e2552556d058aca8bac0a882290acbc05..1b8791d118104352beb2148b6b5cd8c57952ebb2:/config_h.SH diff --git a/config_h.SH b/config_h.SH index 472b5d4..2588ec9 100644 --- a/config_h.SH +++ b/config_h.SH @@ -893,47 +893,6 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$i_vfork I_VFORK /**/ -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. - */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. - */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. - */ -#define INTSIZE $intsize /**/ -#define LONGSIZE $longsize /**/ -#define SHORTSIZE $shortsize /**/ - -/* MULTIARCH: - * This symbol, if defined, signifies that the build - * process will produce some binary files that are going to be - * used in a cross-platform environment. This is the case for - * example with the NeXT "fat" binaries that contain executables - * for several CPUs. - */ -#$multiarch MULTIARCH /**/ - -/* HAS_QUAD: - * This symbol, if defined, tells that there's a 64-bit integer type, - * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one - * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. - */ -#$d_quad HAS_QUAD /**/ -#ifdef HAS_QUAD -# define Quad_t $quadtype /**/ -# define Uquad_t $uquadtype /**/ -# define QUADKIND $quadkind /**/ -# define QUAD_IS_INT 1 -# define QUAD_IS_LONG 2 -# define QUAD_IS_LONG_LONG 3 -# define QUAD_IS_INT64_T 4 -#endif - /* HAS_ACCESSX: * This symbol, if defined, indicates that the accessx routine is * available to do extended access checks. @@ -971,6 +930,27 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define OSNAME "$osname" /**/ #define OSVERS "$osvers" /**/ +/* USE_CROSS_COMPILE: + * This symbol, if defined, indicates that Perl is being cross-compiled. + */ +/* PERL_TARGETARCH: + * This symbol, if defined, indicates the target architecture + * Perl has been cross-compiled to. Undefined if not a cross-compile. + */ +#ifndef USE_CROSS_COMPILE +#$usecrosscompile USE_CROSS_COMPILE /**/ +#define PERL_TARGETARCH "$targetarch" /**/ +#endif + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +#$multiarch MULTIARCH /**/ + /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a * double, or a long double when applicable. Usual values are 2, @@ -1029,6 +1009,22 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define BIN "$bin" /**/ #define BIN_EXP "$binexp" /**/ +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE $intsize /**/ +#define LONGSIZE $longsize /**/ +#define SHORTSIZE $shortsize /**/ + /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... @@ -1462,6 +1458,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_ftello HAS_FTELLO /**/ +/* HAS_FUTIMES: + * This symbol, if defined, indicates that the futimes routine is + * available to change file descriptor time stamps with struct timevals. + */ +#$d_futimes HAS_FUTIMES /**/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1952,6 +1954,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_madvise HAS_MADVISE /**/ +/* HAS_MALLOC_SIZE: + * This symbol, if defined, indicates that the malloc_size + * routine is available for use. + */ +#$d_malloc_size HAS_MALLOC_SIZE /**/ + +/* HAS_MALLOC_GOOD_SIZE: + * This symbol, if defined, indicates that the malloc_good_size + * routine is available for use. + */ +#$d_malloc_good_size HAS_MALLOC_GOOD_SIZE /**/ + /* HAS_MEMCHR: * This symbol, if defined, indicates that the memchr routine is available * to locate characters within a C string. @@ -2301,6 +2315,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define Siglongjmp(buf,retval) longjmp((buf),(retval)) #endif +/* USE_SITECUSTOMIZE: + * This symbol, if defined, indicates that sitecustomize should + * be used. + */ +#$usesitecustomize USE_SITECUSTOMIZE /**/ + /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is * supported. @@ -2519,18 +2539,6 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #$d_strerror_r HAS_STRERROR_R /**/ #define STRERROR_R_PROTO $strerror_r_proto /**/ -/* HAS_STRLCAT: - * This symbol, if defined, indicates that the strlcat () routine is - * available to do string concatenation. - */ -#$d_strlcat HAS_STRLCAT /**/ - -/* HAS_STRLCPY: - * This symbol, if defined, indicates that the strlcpy () routine is - * available to do string copying. - */ -#$d_strlcpy HAS_STRLCPY /**/ - /* HAS_STRTOLD: * This symbol, if defined, indicates that the strtold routine is * available to convert strings to long doubles. @@ -2641,6 +2649,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_unordered HAS_UNORDERED /**/ +/* HAS_UNSETENV: + * This symbol, if defined, indicates that the unsetenv () routine is + * available for use. + */ +#$d_unsetenv HAS_UNSETENV /**/ + /* HAS_USTAT: * This symbol, if defined, indicates that the ustat system call is * available to query file system statistics by dev_t. @@ -3155,6 +3169,22 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#$d_quad HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t $quadtype /**/ +# define Uquad_t $uquadtype /**/ +# define QUADKIND $quadkind /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + /* IVTYPE: * This symbol defines the C type used for Perl's IV. */ @@ -3229,6 +3259,10 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un * This symbol contains the number of bits a variable of type NVTYPE * can preserve of a variable of type UVTYPE. */ +/* NV_ZERO_IS_ALLBITS_ZERO: + * This symbol, if defined, indicates that a variable of type NVTYPE + * stores 0.0 in memory as all bits zero. + */ #define IVTYPE $ivtype /**/ #define UVTYPE $uvtype /**/ #define I8TYPE $i8type /**/ @@ -3257,6 +3291,7 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define NVSIZE $nvsize /**/ #$d_nv_preserves_uv NV_PRESERVES_UV #define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits +#$d_nv_zero_is_allbits_zero NV_ZERO_IS_ALLBITS_ZERO #if UVSIZE == 8 # ifdef BYTEORDER # if BYTEORDER == 0x1234 @@ -3695,17 +3730,34 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #define M_VOID /* Xenix strikes again */ #endif -/* HASATTRIBUTE: - * This symbol indicates the C compiler can check for function attributes, - * such as printf formats. This is normally only supported by GNU cc. +/* HASATTRIBUTE_FORMAT: + * Can we handle GCC attribute for checking printf-style formats */ -#$d_attribut HASATTRIBUTE /**/ -#ifndef HASATTRIBUTE -#ifdef __attribute__ -#undef __attribute__ -#endif -#define __attribute__(_arg_) -#endif +/* HASATTRIBUTE_MALLOC: + * Can we handle GCC attribute for malloc-style functions. + */ +/* HASATTRIBUTE_NONNULL: + * Can we handle GCC attribute for nonnull function parms. + */ +/* HASATTRIBUTE_NORETURN: + * Can we handle GCC attribute for functions that do not return + */ +/* HASATTRIBUTE_PURE: + * Can we handle GCC attribute for pure functions + */ +/* HASATTRIBUTE_UNUSED: + * Can we handle GCC attribute for unused variables and arguments + */ +/* HASATTRIBUTE_WARN_UNUSED_RESULT: + * Can we handle GCC attribute for warning on unused results + */ +#$d_attribute_format HASATTRIBUTE_FORMAT /**/ +#$d_attribute_noreturn HASATTRIBUTE_NORETURN /**/ +#$d_attribute_malloc HASATTRIBUTE_MALLOC /**/ +#$d_attribute_nonnull HASATTRIBUTE_NONNULL /**/ +#$d_attribute_pure HASATTRIBUTE_PURE /**/ +#$d_attribute_unused HASATTRIBUTE_UNUSED /**/ +#$d_attribute_warn_unused_result HASATTRIBUTE_WARN_UNUSED_RESULT /**/ /* HAS_CRYPT: * This symbol, if defined, indicates that the crypt routine is available @@ -3791,24 +3843,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #define SH_PATH "$sh" /**/ -/* USE_CROSS_COMPILE: - * This symbol, if defined, indicates that Perl is being cross-compiled. - */ -/* PERL_TARGETARCH: - * This symbol, if defined, indicates the target architecture - * Perl has been cross-compiled to. Undefined if not a cross-compile. - */ -#ifndef USE_CROSS_COMPILE -#$usecrosscompile USE_CROSS_COMPILE /**/ -#define PERL_TARGETARCH "$targetarch" /**/ -#endif - /* HAS_AINTL: * This symbol, if defined, indicates that the aintl routine is * available. If copysignl is also present we can emulate modfl. */ #$d_aintl HAS_AINTL /**/ +/* HAS_CLEARENV: + * This symbol, if defined, indicates that the clearenv () routine is + * available for use. + */ +#$d_clearenv HAS_CLEARENV /**/ + /* HAS_COPYSIGNL: * This symbol, if defined, indicates that the copysignl routine is * available. If aintl is also present we can emulate modfl. @@ -3867,6 +3913,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_ilogbl HAS_ILOGBL /**/ +/* LIBM_LIB_VERSION: + * This symbol, if defined, indicates that libm exports _LIB_VERSION + * and that math.h defines the enum to manipulate it. + */ +#$d_libm_lib_version LIBM_LIB_VERSION /**/ + /* HAS_NL_LANGINFO: * This symbol, if defined, indicates that the nl_langinfo routine is * available to return local data. You will also need @@ -3922,6 +3974,14 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/ +/* SPRINTF_RETURNS_STRLEN: + * This variable defines whether sprintf returns the length of the string + * (as per the ANSI spec). Some C libraries retain compatibility with + * pre-ANSI C and return a pointer to the passed in buffer; for these + * this variable will be undef. + */ +#$d_sprintf_returns_strlen SPRINTF_RETURNS_STRLEN /**/ + /* HAS_SETRESGID_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the setresgid() function. Otherwise, it is up @@ -3944,6 +4004,18 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un */ #$d_strftime HAS_STRFTIME /**/ +/* HAS_STRLCAT: + * This symbol, if defined, indicates that the strlcat () routine is + * available to do string concatenation. + */ +#$d_strlcat HAS_STRLCAT /**/ + +/* HAS_STRLCPY: + * This symbol, if defined, indicates that the strlcpy () routine is + * available to do string copying. + */ +#$d_strlcpy HAS_STRLCPY /**/ + /* HAS_SYSCALL_PROTO: * This symbol, if defined, indicates that the system provides * a prototype for the syscall() function. Otherwise, it is up @@ -3996,6 +4068,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un #$usefaststdio USE_FAST_STDIO /**/ #endif +/* PERL_RELOCATABLE_INC: + * This symbol, if defined, indicates that we'd like to relocate entries + * in @INC at run time based on the location of the perl binary. + */ +#define PERL_RELOCATABLE_INC "$userelocatableinc" /**/ + /* HAS_CTERMID_R: * This symbol, if defined, indicates that the ctermid_r routine * is available to ctermid re-entrantly.