X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/aebf16e7cdbc86ec766bcfc2294cc17a0e67dc15..13b3f78704810709000ac835e0f07862c2b103e2:/Porting/config_H diff --git a/Porting/config_H b/Porting/config_H index b83e517..16fb48f 100644 --- a/Porting/config_H +++ b/Porting/config_H @@ -17,9 +17,9 @@ /* * Package name : perl5 * Source directory : . - * Configuration time: Mon Jun 8 12:25:25 EDT 1998 - * Configured by : doughera - * Target system : linux fractal 2.0.33 #1 tue feb 3 10:11:46 est 1998 i686 unknown + * Configuration time: Tue Feb 22 23:57:36 EET 2000 + * Configured by : jhi + * Target system : osf1 alpha.hut.fi v4.0 878 alpha */ #ifndef _config_h_ @@ -28,33 +28,7 @@ /* LOC_SED: * This symbol holds the complete pathname to the sed program. */ -#define LOC_SED "/bin/sed" /**/ - -/* BIN: - * This symbol holds the path of the bin directory where the package will - * be installed. Program must be prepared to deal with ~name substitution. - */ -/* BIN_EXP: - * This symbol is the filename expanded version of the BIN symbol, for - * programs that do not want to deal with that at run-time. - */ -#define BIN "/opt/perl/bin" /**/ -#define BIN_EXP "/opt/perl/bin" /**/ - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". - */ -#define CPPSTDIN "cc -E" -#define CPPMINUS "-" +#define LOC_SED "/usr/bin/sed" /**/ /* HAS_ALARM: * This symbol, if defined, indicates that the alarm routine is @@ -66,7 +40,7 @@ * This symbol indicates the C compiler can check for function attributes, * such as printf formats. This is normally only supported by GNU cc. */ -#define HASATTRIBUTE /**/ +/*#define HASATTRIBUTE / **/ #ifndef HASATTRIBUTE #define __attribute__(_arg_) #endif @@ -243,13 +217,6 @@ */ #define HAS_GETGROUPS /**/ -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -#define HAS_UNAME /**/ - /* HAS_GETLOGIN: * This symbol, if defined, indicates that the getlogin routine is * available to get the login name. @@ -292,31 +259,6 @@ */ #define HAS_GETPRIORITY /**/ -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -#define HAS_HTONL /**/ -#define HAS_HTONS /**/ -#define HAS_NTOHL /**/ -#define HAS_NTOHS /**/ - /* HAS_INET_ATON: * This symbol, if defined, indicates to the C program that the * inet_aton() function is available to parse IP address "dotted-quad" @@ -420,11 +362,17 @@ */ #define HAS_MKTIME /**/ -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. */ -#define HAS_MSG /**/ +#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +#define HAS_MUNMAP /**/ /* HAS_NICE: * This symbol, if defined, indicates that the nice routine is @@ -516,12 +464,6 @@ */ #define HAS_SELECT /**/ -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -#define HAS_SEM /**/ - /* HAS_SETEGID: * This symbol, if defined, indicates that the setegid routine is available * to change the effective gid of the current program. @@ -563,7 +505,7 @@ * for a POSIX interface. */ #define HAS_SETPGRP /**/ -/*#define USE_BSD_SETPGRP / **/ +#define USE_BSD_SETPGRP /**/ /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) @@ -607,13 +549,13 @@ * This symbol, if defined, indicates that the setrgid routine is available * to change the real gid of the current program. */ -/*#define HAS_SETRGID / **/ +#define HAS_SETRGID /**/ /* HAS_SETRUID: * This symbol, if defined, indicates that the setruid routine is available * to change the real uid of the current program. */ -/*#define HAS_SETRUID / **/ +#define HAS_SETRUID /**/ /* HAS_SETSID: * This symbol, if defined, indicates that the setsid routine is @@ -621,12 +563,6 @@ */ #define HAS_SETSID /**/ -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. - */ -#define HAS_SHM /**/ - /* Shmat_t: * This symbol holds the return type of the shmat() system call. * Usually set to 'void *' or 'char *'. @@ -641,12 +577,6 @@ #define Shmat_t void * /**/ #define HAS_SHMAT_PROTOTYPE /**/ -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. - */ -/*#define USE_STAT_BLOCKS / **/ - /* HAS_STRCHR: * This symbol is defined to indicate that the strchr()/strrchr() * functions are available for string searching. If not, try the @@ -672,25 +602,6 @@ */ #define USE_STRUCT_COPY /**/ -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. - */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. - */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. - */ -#define HAS_STRERROR /**/ -#define HAS_SYS_ERRLIST /**/ -#define Strerror(e) strerror(e) - /* HAS_STRTOD: * This symbol, if defined, indicates that the strtod routine is * available to provide better numeric string conversion than atof(). @@ -769,11 +680,6 @@ */ #define HAS_UMASK /**/ -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -/*#define HAS_VFORK / **/ - /* HASVOLATILE: * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. @@ -806,6 +712,12 @@ */ #define HAS_WCTOMB /**/ +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include to get inet_addr and friends declarations. + */ +#define I_ARPA_INET /**/ + /* I_DBM: * This symbol, if defined, indicates that exists and should * be included. @@ -834,7 +746,7 @@ * portably declare your directory entries. */ #define I_DIRENT /**/ -/*#define DIRNAMLEN / **/ +#define DIRNAMLEN /**/ #define Direntry_t struct dirent /* I_DLFCN: @@ -855,12 +767,6 @@ */ #define I_FLOAT /**/ -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#define I_GRP /**/ - /* I_LIMITS: * This symbol, if defined, indicates to the C program that it should * include to get definition of symbols like WORD_BIT or @@ -1057,21 +963,6 @@ */ /*#define I_VFORK / **/ -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. - */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. - */ -#define Malloc_t void * /**/ -#define Free_t void /**/ - -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. - */ -/*#define MYMALLOC / **/ - /* CAN_PROTOTYPE: * If defined, this macro indicates that the C compiler can handle * function prototypes. @@ -1103,47 +994,158 @@ * This symbol is defined to be the type of char used in stdio.h. * It has the values "unsigned char" or "char". */ -#define STDCHAR char /**/ +#define STDCHAR unsigned char /**/ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. */ -#ifndef VOIDUSED -#define VOIDUSED 15 -#endif -#define VOIDFLAGS 15 -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ +/*#define CROSSCOMPILE / **/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 8 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +/*#define MULTIARCH / **/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#define HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t long /**/ +# define Uquad_t unsigned long /**/ +# define QUADKIND 2 /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 #endif +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +/*#define HAS_ACCESSX / **/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +/*#define HAS_EACCESS / **/ + +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_ACCESS /**/ + +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_SECURITY /**/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "dec_osf" /**/ + /* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. - * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture - * Binaries (MAB) for targets with varying alignment. This only matters - * for perl, where the config.h can be generated and installed on one - * system, and used by a different architecture to build an extension. - * The default is eight, for safety. + * This symbol contains the number of bytes required to align a + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES 8 +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB "/opt/perl/lib/5.5.660/alpha-dec_osf-thread-multi" /**/ +#define ARCHLIB_EXP "/opt/perl/lib/5.5.660/alpha-dec_osf-thread-multi" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "alpha-dec_osf-thread-multi" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +/*#define HAS_ATOLF / **/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +/*#define HAS_ATOLL / **/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "/opt/perl/bin" /**/ +#define BIN_EXP "/opt/perl/bin" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that Perl 5.006 should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always + * for those versions. */ -#define MEM_ALIGNBYTES 4 /**/ +/*#define PERL_BINCOMPAT_5005 / **/ /* BYTEORDER: * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture * Binaries (MAB) on either big endian or little endian machines. * The endian-ness is available at compile-time. This only matters @@ -1154,43 +1156,215 @@ * so the default case (for NeXT) is big endian to catch them. * This might matter for NeXT 3.0. */ -#ifndef NeXT -#define BYTEORDER 0x1234 /* large digits for MSB */ -#else /* NeXT */ -#ifdef __LITTLE_ENDIAN__ -#define BYTEORDER 0x1234 -#else /* __BIG_ENDIAN__ */ -#define BYTEORDER 0x4321 -#endif /* ENDIAN CHECK */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else +#define BYTEORDER 0x12345678 /* large digits for MSB */ #endif /* NeXT */ -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -/*#define CASTI32 / **/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. +/* CAT2: + * This macro catenates 2 tokens together. */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list +/* STRINGIFY: + * This macro surrounds its token with double quotes. */ -#define CASTNEGFLOAT /**/ -#define CASTFLAGS 0 /**/ +#if 42 == 1 +#define CAT2(a,b)a/**/b +#define STRINGIFY(a)"a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +#define CAT2(a,b)a ## b +#define StGiFy(a)# a +#define STRINGIFY(a)StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif -/* VOID_CLOSEDIR: +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "cppstdin" +#define CPPMINUS "" +#define CPPRUN "/usr/bin/cpp" +#define CPPLAST "" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#define HAS_ACCESS /**/ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +/*#define CASTI32 / **/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +#define CASTNEGFLOAT /**/ +#define CASTFLAGS 0 /**/ + +/* VOID_CLOSEDIR: * This symbol, if defined, indicates that the closedir() routine * does not return a value. */ /*#define VOID_CLOSEDIR / **/ +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +#define HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "/usr/bin/csh" /**/ +#endif + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +/*#define DLSYM_NEEDS_UNDERSCORE / **/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); + */ +#define HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#define HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#define HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#define HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#define HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#define HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#define HAS_ENDSERVENT /**/ + +/* HAS_ENDSPENT: + * This symbol, if defined, indicates that the endspent system call is + * available to finalize the scan of SysV shadow password entries. + */ +/*#define HAS_ENDSPENT / **/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in + */ +#define HAS_FD_SET /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +/*#define HAS_STRUCT_FS_DATA / **/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FSEEKO / **/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +#define HAS_FSTATFS /**/ +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FTELLO / **/ + /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This @@ -1208,417 +1382,399 @@ */ #define Gconvert(x,n,t,b) gcvt((x),(n),(b)) -/* HAS_GNULIBC: - * This symbol, if defined, indicates to the C program that - * the GNU C library is being used. - */ -#define HAS_GNULIBC /**/ -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. - */ -#define HAS_ISASCII /**/ - -/* HAS_LCHOWN: - * This symbol, if defined, indicates that the lchown routine is - * available to operate on a symbolic link (instead of following the - * link). +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. */ -/*#define HAS_LCHOWN / **/ +#define HAS_GETCWD /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. */ -#define HAS_OPEN3 /**/ +#define HAS_GETGRENT /**/ -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. */ -#define HAS_SAFE_BCOPY /**/ +#define HAS_GETHOSTBYADDR /**/ -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. */ -/*#define HAS_SAFE_MEMCPY / **/ +#define HAS_GETHOSTBYNAME /**/ -/* HAS_SANE_MEMCMP: - * This symbol, if defined, indicates that the memcmp routine is available - * and can be used to compare relative magnitudes of chars with their high - * bits set. If it is not defined, roll your own version. +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. */ -#define HAS_SANE_MEMCMP /**/ +#define HAS_GETHOSTENT /**/ -/* HAS_SIGACTION: - * This symbol, if defined, indicates that Vr4's sigaction() routine - * is available. +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. */ -#define HAS_SIGACTION /**/ - -/* Sigjmp_buf: - * This is the buffer type to be used with Sigsetjmp and Siglongjmp. +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. */ -/* Sigsetjmp: - * This macro is used in the same way as sigsetjmp(), but will invoke - * traditional setjmp() if sigsetjmp isn't available. - * See HAS_SIGSETJMP. +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. */ -/* Siglongjmp: - * This macro is used in the same way as siglongjmp(), but will invoke - * traditional longjmp() if siglongjmp isn't available. - * See HAS_SIGSETJMP. +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. */ -#define HAS_SIGSETJMP /**/ -#ifdef HAS_SIGSETJMP -#define Sigjmp_buf sigjmp_buf -#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) -#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) -#else -#define Sigjmp_buf jmp_buf -#define Sigsetjmp(buf,save_mask) setjmp((buf)) -#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#define HAS_GETHOSTNAME /**/ +#define HAS_UNAME /**/ +/*#define HAS_PHOSTNAME / **/ +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "" /* How to get the host name */ #endif -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. +#define HAS_GETHOST_PROTOS /**/ + +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. +/*#define HAS_GETMNT / **/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. +/*#define HAS_GETMNTENT / **/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. */ -#define USE_STDIO_PTR /**/ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) ((fp)->_IO_read_ptr) -#define STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr) -/*#define STDIO_CNT_LVALUE / **/ -#endif +#define HAS_GETNETBYADDR /**/ -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. */ -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. +#define HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. +#define HAS_GETNETENT /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -#define USE_STDIO_BASE /**/ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) ((fp)->_IO_read_base) -#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base) -#endif +#define HAS_GETNET_PROTOS /**/ -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#define HAS_VPRINTF /**/ -/*#define USE_CHAR_VSPRINTF / **/ +#define HAS_GETPROTOENT /**/ -/* DOUBLESIZE: - * This symbol contains the size of a double, so that the C preprocessor - * can make decisions based on it. +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. */ -#define DOUBLESIZE 8 /**/ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#define HAS_GETPROTOBYNAME /**/ +#define HAS_GETPROTOBYNUMBER /**/ -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. +#define HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. */ -/*#define I_TIME / **/ -#define I_SYS_TIME /**/ -/*#define I_SYS_TIME_KERNEL / **/ +#define HAS_GETSERVENT /**/ -/* INTSIZE: - * This symbol contains the value of sizeof(int) so that the C - * preprocessor can make decisions based on it. +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. */ -/* LONGSIZE: - * This symbol contains the value of sizeof(long) so that the C - * preprocessor can make decisions based on it. +#define HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPENT: + * This symbol, if defined, indicates that the getspent system call is + * available to retrieve SysV shadow password entries sequentially. */ -/* SHORTSIZE: - * This symbol contains the value of sizeof(short) so that the C - * preprocessor can make decisions based on it. +/*#define HAS_GETSPENT / **/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. */ -#define INTSIZE 4 /**/ -#define LONGSIZE 4 /**/ -#define SHORTSIZE 2 /**/ +/*#define HAS_GETSPNAM / **/ -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! +#define HAS_GETSERVBYNAME /**/ +#define HAS_GETSERVBYPORT /**/ + +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). +/*#define HAS_GNULIBC / **/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. */ -#define VAL_O_NONBLOCK O_NONBLOCK -#define VAL_EAGAIN EAGAIN -#define RD_NODATA -1 -#define EOF_NONBLOCK +/*#define HAS_HASMNTOPT / **/ -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. It will be sizeof(void *) if - * the compiler supports (void *); otherwise it will be - * sizeof(char *). +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. */ -#define PTRSIZE 4 /**/ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ -/* RANDBITS: - * This symbol contains the number of bits of random number the rand() - * function produces. Usual values are 15, 16, and 31. +/* HAS_ICONV: + * This symbol, if defined, indicates that the iconv routine is + * available to do character set conversions. */ -#define RANDBITS 31 /**/ +/*#define HAS_ICONV / **/ -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. */ -#define SSize_t ssize_t /* signed count of bytes */ +/*#define HAS_INT64_T / **/ -/* OSNAME: - * This symbol contains the name of the operating system, as determined - * by Configure. You shouldn't rely on it too much; the specific - * feature tests from Configure are generally more reliable. +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. */ -#define OSNAME "linux" /**/ +#define HAS_ISASCII /**/ -/* ARCHLIB: - * This variable, if defined, holds the name of the directory in - * which the user wants to put architecture-dependent public - * library files for perl5. It is most often a local directory - * such as /usr/local/lib. Programs using this variable must be - * prepared to deal with filename expansion. If ARCHLIB is the - * same as PRIVLIB, it is not defined, since presumably the - * program already searches PRIVLIB. +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). */ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +#define HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. */ -#define ARCHLIB "/opt/perl/lib/i686-linux-thread/5.00466" /**/ -#define ARCHLIB_EXP "/opt/perl/lib/i686-linux-thread/5.00466" /**/ +#define HAS_LDBL_DIG /* */ -/* CAT2: - * This macro catenates 2 tokens together. +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. */ -#if 42 == 1 -#define CAT2(a,b)a/**/b -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if 42 == 42 -#define CAT2(a,b)a ## b -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#endif -#if 42 != 1 && 42 != 42 -#include "Bletch: How does this C preprocessor catenate tokens?" +#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 8 /**/ #endif -/* CSH: - * This symbol, if defined, contains the full pathname of csh. +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. */ -#define HAS_CSH /**/ -#ifdef HAS_CSH -#define CSH "/bin/csh" /**/ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE 8 /**/ #endif -/* HAS_ENDHOSTENT: - * This symbol, if defined, indicates that the endhostent() routine is - * available to close whatever was being used for host queries. +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. */ -#define HAS_ENDHOSTENT /**/ +#define HAS_MEMCHR /**/ -/* HAS_ENDNETENT: - * This symbol, if defined, indicates that the endnetent() routine is - * available to close whatever was being used for network queries. +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. */ -#define HAS_ENDNETENT /**/ +/*#define HAS_MKDTEMP / **/ -/* HAS_ENDPROTOENT: - * This symbol, if defined, indicates that the endprotoent() routine is - * available to close whatever was being used for protocol queries. +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. */ -#define HAS_ENDPROTOENT /**/ +#define HAS_MKSTEMP /**/ -/* HAS_ENDSERVENT: - * This symbol, if defined, indicates that the endservent() routine is - * available to close whatever was being used for service queries. +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. */ -#define HAS_ENDSERVENT /**/ +/*#define HAS_MKSTEMPS / **/ -/* HAS_GETHOSTBYADDR: - * This symbol, if defined, indicates that the gethostbyaddr() routine is - * available to look up hosts by their IP addresses. +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. */ -#define HAS_GETHOSTBYADDR /**/ - -/* HAS_GETHOSTBYNAME: - * This symbol, if defined, indicates that the gethostbyname() routine is - * available to look up host names in some data base or other. +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. */ -#define HAS_GETHOSTBYNAME /**/ +#define HAS_MMAP /**/ +#define Mmap_t void * /**/ -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent() routine is - * available to look up host names in some data base or another. +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. */ -#define HAS_GETHOSTENT /**/ +#define HAS_MPROTECT /**/ -/* HAS_GETNETBYADDR: - * This symbol, if defined, indicates that the getnetbyaddr() routine is - * available to look up networks by their IP addresses. +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). */ -#define HAS_GETNETBYADDR /**/ +#define HAS_MSG /**/ -/* HAS_GETNETBYNAME: - * This symbol, if defined, indicates that the getnetbyname() routine is - * available to look up networks by their names. +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. */ -#define HAS_GETNETBYNAME /**/ +#define HAS_OPEN3 /**/ -/* HAS_GETNETENT: - * This symbol, if defined, indicates that the getnetent() routine is - * available to look up network names in some data base or another. +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. */ -#define HAS_GETNETENT /**/ +/*#define OLD_PTHREAD_CREATE_JOINABLE / **/ -/* HAS_GETPROTOENT: - * This symbol, if defined, indicates that the getprotoent() routine is - * available to look up protocols in some data base or another. +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. */ -#define HAS_GETPROTOENT /**/ - -/* HAS_GETPROTOBYNAME: - * This symbol, if defined, indicates that the getprotobyname() - * routine is available to look up protocols by their name. +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. */ -/* HAS_GETPROTOBYNUMBER: - * This symbol, if defined, indicates that the getprotobynumber() - * routine is available to look up protocols by their number. +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. */ -#define HAS_GETPROTOBYNAME /**/ -#define HAS_GETPROTOBYNUMBER /**/ +/*#define HAS_PTHREAD_YIELD / **/ +#define SCHED_YIELD sched_yield() /**/ +#define HAS_SCHED_YIELD /**/ -/* HAS_GETSERVENT: - * This symbol, if defined, indicates that the getservent() routine is - * available to look up network services in some data base or another. +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -#define HAS_GETSERVENT /**/ +#define HAS_SAFE_BCOPY /**/ -/* HAS_GETSERVBYNAME: - * This symbol, if defined, indicates that the getservbyname() - * routine is available to look up services by their name. - */ -/* HAS_GETSERVBYPORT: - * This symbol, if defined, indicates that the getservbyport() - * routine is available to look up services by their port. +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -#define HAS_GETSERVBYNAME /**/ -#define HAS_GETSERVBYPORT /**/ +/*#define HAS_SAFE_MEMCPY / **/ -/* HAS_LONG_DOUBLE: - * This symbol will be defined if the C compiler supports long - * doubles. - */ -/* LONG_DOUBLESIZE: - * This symbol contains the size of a long double, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long doubles. +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. */ -#define HAS_LONG_DOUBLE /**/ -#ifdef HAS_LONG_DOUBLE -#define LONG_DOUBLESIZE 12 /**/ -#endif +#define HAS_SANE_MEMCMP /**/ -/* HAS_LONG_LONG: - * This symbol will be defined if the C compiler supports - * long long. +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. */ -/* LONGLONGSIZE: - * This symbol contains the size of a long long, so that the - * C preprocessor can make decisions based on it. It is only - * defined if the system supports long long. +#define HAS_SEM /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. */ -#define HAS_LONG_LONG /**/ -#ifdef HAS_LONG_LONG -#define LONGLONGSIZE 8 /**/ -#endif +#define HAS_SETGRENT /**/ /* HAS_SETGROUPS: * This symbol, if defined, indicates that the setgroups() routine is @@ -1645,59 +1801,406 @@ */ #define HAS_SETPROTOENT /**/ +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +#define HAS_SETPWENT /**/ + /* HAS_SETSERVENT: * This symbol, if defined, indicates that the setservent() routine is * available. */ #define HAS_SETSERVENT /**/ +/* HAS_SETSPENT: + * This symbol, if defined, indicates that the setspent system call is + * available to initialize the scan of SysV shadow password entries. + */ +/*#define HAS_SETSPENT / **/ + /* HAS_SETVBUF: * This symbol, if defined, indicates that the setvbuf routine is * available to change buffering on an open stdio stream. * to a line-buffered mode. */ -#define HAS_SETVBUF /**/ +#define HAS_SETVBUF /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +/*#define USE_SFIO / **/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +#define HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +#define HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +#define HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#define HAS_SOCKET /**/ +#define HAS_SOCKETPAIR /**/ +#define HAS_MSG_CTRUNC /**/ +#define HAS_MSG_DONTROUTE /**/ +#define HAS_MSG_OOB /**/ +#define HAS_MSG_PEEK /**/ +/*#define HAS_MSG_PROXY / **/ +#define HAS_SCM_RIGHTS /**/ + +/* HAS_SOCKLEN_T: + * This symbol will defined if the C compiler supports socklen_t. + * Usually the needs to be included. + */ +/*#define HAS_SOCKLEN_T / **/ + +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. + */ +#define HAS_SQRTL /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#ifndef USE_STAT_BLOCKS +#define USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from (BSD 4.3), + * not from (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. + */ +#define HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. + */ +#define HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. + */ +#define HAS_FSTATVFS /**/ + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +#define USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) ((fp)->_ptr) +#define STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) ((fp)->_cnt) +#define STDIO_CNT_LVALUE /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#define USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) ((fp)->_base) +#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) +#endif + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +#define HAS_SYS_ERRLIST /**/ +#define Strerror(e) strerror(e) + +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +/*#define HAS_STRTOLD / **/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +/*#define HAS_STRTOLL / **/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +/*#define HAS_STRTOULL / **/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +/*#define HAS_STRTOUQ / **/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir _((DIR*)); + */ +#define HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +#define HAS_TIMES /**/ + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including . If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +/*#define HAS_UNION_SEMUN / **/ +#define USE_SEMCTL_SEMUN /**/ +#define USE_SEMCTL_SEMID_DS /**/ + +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +#define HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +/*#define HAS_VFORK / **/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t void /* Signal handler's return type */ + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +/*#define USE_CHAR_VSPRINTF / **/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#define USE_DYNAMIC_LOADING /**/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE 8 /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +/*#define EBCDIC / **/ -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. */ -#define HAS_SOCKET /**/ -#define HAS_SOCKETPAIR /**/ +#define FFLUSH_NULL /**/ +/*#define FFLUSH_ALL / **/ -/* HAS_UNION_SEMUN: - * This symbol, if defined, indicates that the union semun is - * defined by including . If not, the user code - * probably needs to define it as: - * union semun { - * int val; - * struct semid_ds *buf; - * unsigned short *array; - * } +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. */ -/* USE_SEMCTL_SEMUN: - * This symbol, if defined, indicates that union semun is - * used for semctl IPC_STAT. +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. */ -/* USE_SEMCTL_SEMID_DS: - * This symbol, if defined, indicates that struct semid_ds * is - * used for semctl IPC_STAT. +#define Gid_t_f "u" /**/ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. */ -#define HAS_UNION_SEMUN /**/ -#define USE_SEMCTL_SEMUN /**/ -#define USE_SEMCTL_SEMID_DS /**/ +#define Gid_t_size 4 /* GID size */ -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. */ -#define Signal_t void /* Signal handler's return type */ +#define Gid_t gid_t /* Type for getgid(), etc... */ /* Groups_t: * This symbol holds the type used for the second argument to @@ -1712,12 +2215,78 @@ #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ #endif +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +#define DB_Hash_t u_int32_t /**/ +#define DB_Prefix_t size_t /**/ + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in contains gr_passwd. + */ +#define I_GRP /**/ +#define GRPASSWD /**/ + +/* I_ICONV: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_ICONV /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_INTTYPES / **/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_MACH_CTHREADS / **/ + +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_MNTENT / **/ + /* I_NETDB: * This symbol, if defined, indicates that exists and * should be included. */ #define I_NETDB /**/ +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_POLL /**/ + +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_PTHREAD /**/ + /* I_PWD: * This symbol, if defined, indicates to the C program that it should * include . @@ -1750,14 +2319,343 @@ * This symbol, if defined, indicates to the C program that struct passwd * contains pw_gecos. */ -#define I_PWD /**/ -/*#define PWQUOTA / **/ -/*#define PWAGE / **/ -/*#define PWCHANGE / **/ -/*#define PWCLASS / **/ -/*#define PWEXPIRE / **/ -/*#define PWCOMMENT / **/ -#define PWGECOS /**/ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +#define I_PWD /**/ +#define PWQUOTA /**/ +/*#define PWAGE / **/ +/*#define PWCHANGE / **/ +/*#define PWCLASS / **/ +/*#define PWEXPIRE / **/ +#define PWCOMMENT /**/ +#define PWGECOS /**/ +#define PWPASSWD /**/ + +/* I_SHADOW: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SHADOW / **/ + +/* I_SOCKS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SOCKS / **/ + +/* I_SYSLOG: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYSLOG /**/ + +/* I_SYSMODE: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYSMODE /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYS_MOUNT /**/ + +/* I_SYS_STATFS: + * This symbol, if defined, indicates that exists. + */ +/*#define I_SYS_STATFS / **/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYS_STATVFS /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYSUIO /**/ + +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_SYSUTSNAME /**/ + +/* I_SYS_VFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_SYS_VFS / **/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. + */ +/*#define I_TIME / **/ +#define I_SYS_TIME /**/ +/*#define I_SYS_TIME_KERNEL / **/ + +/* I_USTAT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#define I_USTAT /**/ + +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. + */ +#define PERL_INC_VERSION_LIST 0 /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +#define INSTALL_USR_BIN_PERL /**/ + +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +/*#define HAS_OFF64_T / **/ +/*#define HAS_FPOS64_T / **/ + +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. + */ +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. + */ +#define PERL_PRIfldbl "f" /**/ +#define PERL_PRIgldbl "g" /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t off_t /* type */ +#define LSEEKSIZE 8 /* size */ +#define Off_t_size 8 /* size */ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ +#define Free_t void /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +/*#define MYMALLOC / **/ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. + */ +#define Mode_t mode_t /* file mode parameter for system calls */ + +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). + */ +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). + */ +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). + */ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t const char * /**/ +#define Netdb_hlen_t int /**/ +#define Netdb_name_t const char * /**/ +#define Netdb_net_t int /**/ + +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. + */ +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. + */ +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. + */ +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. + */ +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. + */ +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. + */ +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. + */ +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. + */ +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. + */ +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. + */ +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. + */ +/* IVSIZE: + * This symbol contains the sizeof(IV). + */ +/* UVSIZE: + * This symbol contains the sizeof(UV). + */ +/* I8SIZE: + * This symbol contains the sizeof(I8). + */ +/* U8SIZE: + * This symbol contains the sizeof(U8). + */ +/* I16SIZE: + * This symbol contains the sizeof(I16). + */ +/* U16SIZE: + * This symbol contains the sizeof(U16). + */ +/* I32SIZE: + * This symbol contains the sizeof(I32). + */ +/* U32SIZE: + * This symbol contains the sizeof(U32). + */ +/* I64SIZE: + * This symbol contains the sizeof(I64). + */ +/* U64SIZE: + * This symbol contains the sizeof(U64). + */ +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bit of a variable of type UVSIZE. + */ +#define IVTYPE long /**/ +#define UVTYPE unsigned long /**/ +#define I8TYPE char /**/ +#define U8TYPE unsigned char /**/ +#define I16TYPE short /**/ +#define U16TYPE unsigned short /**/ +#define I32TYPE int /**/ +#define U32TYPE unsigned int /**/ +#ifdef HAS_QUAD +#define I64TYPE long /**/ +#define U64TYPE unsigned long /**/ +#endif +#define NVTYPE double /**/ +#define IVSIZE 8 /**/ +#define UVSIZE 8 /**/ +#define I8SIZE 1 /**/ +#define U8SIZE 1 /**/ +#define I16SIZE 2 /**/ +#define U16SIZE 2 /**/ +#define I32SIZE 4 /**/ +#define U32SIZE 4 /**/ +#ifdef HAS_QUAD +#define I64SIZE 8 /**/ +#define U64SIZE 8 /**/ +#endif +#undef NV_PRESERVES_UV + +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. + */ +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. + */ +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. + */ +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer. + */ +#define IVdf "ld" /**/ +#define UVuf "lu" /**/ +#define UVof "lo" /**/ +#define UVxf "lx" /**/ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Pid_t pid_t /* PID type */ /* PRIVLIB: * This symbol contains the name of the private library for this package. @@ -1769,8 +2667,58 @@ * This symbol contains the ~name expanded version of PRIVLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define PRIVLIB "/opt/perl/lib" /**/ -#define PRIVLIB_EXP "/opt/perl/lib" /**/ +#define PRIVLIB "/opt/perl/lib/5.5.660" /**/ +#define PRIVLIB_EXP "/opt/perl/lib/5.5.660" /**/ + +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE 8 /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() drand48() /**/ +#define Rand_seed_t long /**/ +#define seedDrand01(x) srand48((Rand_seed_t)x) /**/ +#define RANDBITS 48 /**/ + +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. + */ +#define SELECT_MIN_BITS 32 /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t fd_set * /**/ /* SIG_NAME: * This symbol contains a list of signal names in order of @@ -1800,8 +2748,8 @@ * The last element is 0, corresponding to the 0 at the end of * the sig_name list. */ -#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "UNUSED", "IOT", "CLD", "POLL", 0 /**/ -#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 6, 17, 29, 0 /**/ +#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/ +#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/ /* SITEARCH: * This symbol contains the name of the private library for this package. @@ -1809,15 +2757,17 @@ * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITEARCH_EXP: * This symbol contains the ~name expanded version of SITEARCH, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define SITEARCH "/opt/perl/lib/site_perl/i686-linux-thread" /**/ -#define SITEARCH_EXP "/opt/perl/lib/site_perl/i686-linux-thread" /**/ +#define SITEARCH "/opt/perl/lib/site_perl/5.5.660/alpha-dec_osf-thread-multi" /**/ +#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.5.660/alpha-dec_osf-thread-multi" /**/ /* SITELIB: * This symbol contains the name of the private library for this package. @@ -1825,48 +2775,35 @@ * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. - * Individual sites may place their own extensions and modules in - * this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. */ /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define SITELIB "/opt/perl/lib/site_perl" /**/ -#define SITELIB_EXP "/opt/perl/lib/site_perl" /**/ - -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. - */ -/*#define DLSYM_NEEDS_UNDERSCORE / **/ - -/* USE_SFIO: - * This symbol, if defined, indicates that sfio should - * be used. - */ -/*#define USE_SFIO / **/ +#define SITELIB "/opt/perl/lib/site_perl/5.5.660" /**/ +#define SITELIB_EXP "/opt/perl/lib/site_perl/5.5.660" /**/ -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. */ -#define USE_DYNAMIC_LOADING /**/ +#define Size_t size_t /* length paramater for string functions */ -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. - */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). */ -#define DB_Hash_t u_int32_t /**/ -#define DB_Prefix_t size_t /**/ +#define SSize_t ssize_t /* signed count of bytes */ /* STARTPERL: * This variable contains the string to put in front of a perl @@ -1875,177 +2812,176 @@ */ #define STARTPERL "#!/opt/perl/bin/perl" /**/ -/* USE_PERLIO: - * This symbol, if defined, indicates that the PerlIO abstraction should - * be used throughout. If not defined, stdio should be - * used in a fully backward compatible manner. - */ -/*#define USE_PERLIO / **/ - -/* HAS_GETHOST_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for gethostent(), gethostbyname(), and - * gethostbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. */ -#define HAS_GETHOST_PROTOS /**/ - -/* HAS_GETNET_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getnetent(), getnetbyname(), and - * getnetbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. */ -#define HAS_GETNET_PROTOS /**/ +#define HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY _iob -/* HAS_GETPROTO_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getprotoent(), getprotobyname(), and - * getprotobyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. */ -#define HAS_GETPROTO_PROTOS /**/ +#define Uid_t_f "u" /**/ -/* HAS_GETSERV_PROTOS: - * This symbol, if defined, indicates that includes - * prototypes for getservent(), getservbyname(), and - * getservbyaddr(). Otherwise, it is up to the program to guess - * them. See netdbtype.U for probing for various Netdb_xxx_t types. +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. */ -#define HAS_GETSERV_PROTOS /**/ +#define Uid_t_size 4 /* UID size */ -/* Netdb_host_t: - * This symbol holds the type used for the 1st argument - * to gethostbyaddr(). - */ -/* Netdb_hlen_t: - * This symbol holds the type used for the 2nd argument - * to gethostbyaddr(). - */ -/* Netdb_name_t: - * This symbol holds the type used for the argument to - * gethostbyname(). - */ -/* Netdb_net_t: - * This symbol holds the type used for the 1st argument to - * getnetbyaddr(). +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. */ -#define Netdb_host_t const char * /**/ -#define Netdb_hlen_t int /**/ -#define Netdb_name_t const char * /**/ -#define Netdb_net_t unsigned long /**/ +#define Uid_t uid_t /* UID type */ -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. +/* USE_64_BITS: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). */ -#define Select_fd_set_t fd_set * /**/ +#ifndef USE_64_BITS +#define USE_64_BITS /**/ +#endif -/* ARCHNAME: - * This symbol holds a string representing the architecture name. - * It may be used to construct an architecture-dependant pathname - * where library files may be held under a private library, for - * instance. +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. The USE_64_BITS symbol will + * also be turned on if necessary. */ -#define ARCHNAME "i686-linux-thread" /**/ +#ifndef USE_LARGE_FILES +#define USE_LARGE_FILES /**/ +#endif -/* HAS_PTHREAD_YIELD: - * This symbol, if defined, indicates that the pthread_yield - * routine is available to yield the execution of the current - * thread. - */ -/* HAS_SCHED_YIELD: - * This symbol, if defined, indicates that the sched_yield - * routine is available to yield the execution of the current - * thread. +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. */ -/*#define HAS_PTHREAD_YIELD / **/ -#define HAS_SCHED_YIELD /**/ +#ifndef USE_LONG_DOUBLE +/*#define USE_LONG_DOUBLE / **/ +#endif -/* PTHREADS_CREATED_JOINABLE: - * This symbol, if defined, indicates that pthreads are created - * in the joinable (aka undetached) state. +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. */ -#define PTHREADS_CREATED_JOINABLE /**/ +#ifndef USE_MORE_BITS +/*#define USE_MORE_BITS / **/ +#endif -/* USE_THREADS: - * This symbol, if defined, indicates that Perl should - * be built to use threads. - */ -/* OLD_PTHREADS_API: +/* MULTIPLICITY: * This symbol, if defined, indicates that Perl should - * be built to use the old draft POSIX threads API. - */ -#define USE_THREADS /**/ -/*#define OLD_PTHREADS_API / **/ - -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). + * be built to use multiplicity. */ -#define Time_t time_t /* Time type */ +#ifndef MULTIPLICITY +#define MULTIPLICITY /**/ +#endif -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. */ -#define HAS_TIMES /**/ +#ifndef USE_PERLIO +/*#define USE_PERLIO / **/ +#endif -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. */ -#define Fpos_t fpos_t /* File position type */ +#ifndef USE_SOCKS +/*#define USE_SOCKS / **/ +#endif -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. */ -#define Gid_t gid_t /* Type for getgid(), etc... */ - -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. */ -#define Off_t off_t /* type */ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. */ -#define Mode_t mode_t /* file mode parameter for system calls */ +/*#define USE_5005THREADS / **/ +#define USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +/*#define OLD_PTHREADS_API / **/ -/* Pid_t: - * This symbol holds the type used to declare process ids in the kernel. - * It can be int, uint, pid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. */ -#define Pid_t pid_t /* PID type */ +/*#define PERL_VENDORLIB_EXP "" / **/ -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. */ -#define Size_t size_t /* length paramater for string functions */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Uid_t uid_t /* UID type */ +/* PERL_XS_APIVERSION: + * This variable contains the version of the oldest perl binary + * compatible with the present perl. perl.c:incpush() and + * lib/lib.pm will automatically search in /opt/perl/lib/site_perl/5.5.660/alpha-dec_osf-thread-multi for older + * directories across major versions back to xs_apiversion. + * This is only useful if you have a perl library directory tree + * structured like the default one. + * See INSTALL for how this works. + * The versioned site_perl directory was introduced in 5.005, + * so that is the lowest possible value. + * Since this can depend on compile time options (such as + * bincompat) it is set by Configure. Other non-default sources + * of potential incompatibility, such as multiplicity, threads, + * debugging, 64bits, sfio, etc., are not checked for currently, + * though in principle we could go snooping around in old + * Config.pm files. + */ +/* PERL_PM_APIVERSION: + * This variable contains the version of the oldest perl + * compatible with the present perl. (That is, pure perl modules + * written for pm_apiversion will still work for the current + * version). perl.c:incpush() and lib/lib.pm will automatically + * search in /opt/perl/lib/site_perl/5.5.660 for older directories across major versions + * back to pm_apiversion. This is only useful if you have a perl + * library directory tree structured like the default one. The + * versioned site_perl library was introduced in 5.005, so that's + * the default setting for this variable. It's hard to imagine + * it changing before Perl6. It is included here for symmetry + * with xs_apiveprsion -- the searching algorithms will + * (presumably) be similar. + * See the INSTALL file for how this works. + */ +#define PERL_XS_APIVERSION "5.5.660" +#define PERL_PM_APIVERSION "5.005" #endif