X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/a0dd42312a1f26356d2fdf49656e45b77c2cefb5..173ee337ccae1a3f75728b24e42392c298525e81:/regcomp.h diff --git a/regcomp.h b/regcomp.h index 448b0e9..3bb1a53 100644 --- a/regcomp.h +++ b/regcomp.h @@ -125,13 +125,28 @@ * * See regexp.h for flags used externally to the regexp engine */ +#define RXp_INTFLAGS(rx) ((rx)->intflags) +#define RX_INTFLAGS(prog) RXp_INTFLAGS(ReANY(prog)) + #define PREGf_SKIP 0x00000001 #define PREGf_IMPLICIT 0x00000002 /* Converted .* to ^.* */ #define PREGf_NAUGHTY 0x00000004 /* how exponential is this pattern? */ #define PREGf_VERBARG_SEEN 0x00000008 #define PREGf_CUTGROUP_SEEN 0x00000010 #define PREGf_USE_RE_EVAL 0x00000020 /* compiled with "use re 'eval'" */ +/* these used to be extflags, but are now intflags */ +#define PREGf_NOSCAN 0x00000040 +#define PREGf_CANY_SEEN 0x00000080 +#define PREGf_GPOS_SEEN 0x00000100 +#define PREGf_GPOS_FLOAT 0x00000200 + +#define PREGf_ANCH_BOL 0x00000400 +#define PREGf_ANCH_MBOL 0x00000800 +#define PREGf_ANCH_SBOL 0x00001000 +#define PREGf_ANCH_GPOS 0x00002000 +#define PREGf_ANCH (PREGf_ANCH_SBOL | PREGf_ANCH_GPOS | \ + PREGf_ANCH_MBOL | PREGf_ANCH_BOL ) /* this is where the old regcomp.h started */ @@ -170,14 +185,25 @@ struct regnode_2 { }; -#define ANYOF_BITMAP_SIZE 32 /* 256 b/(8 b/B) */ +#define ANYOF_BITMAP_SIZE (256 / 8) /* 8 bits/Byte */ + +/* Note that these form structs which are supersets of the next smaller one, by + * appending fields. Alignment problems can occur if one of those optional + * fields requires stricter alignment than the base struct. And formal + * parameters that can really be two or more of the structs should be + * declared as the smallest one it could be. See commit message for + * 7dcac5f6a5195002b55c935ee1d67f67e1df280b. Regnode allocation is done + * without regard to alignment, and changing it to would also require changing + * the code that inserts and deletes regnodes. The basic single-argument + * regnode has a U32, which is what reganode() allocates as a unit. Therefore + * no field can require stricter alignment than U32. */ /* also used by trie */ struct regnode_charclass { U8 flags; U8 type; U16 next_off; - U32 arg1; /* used as ptr in S_regclass */ + U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; /* only compile-time */ }; @@ -186,24 +212,46 @@ struct regnode_charclass_class { U8 flags; /* ANYOF_POSIXL bit must go here */ U8 type; U16 next_off; - U32 arg1; /* used as ptr in S_regclass */ + U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; /* both compile-time */ U32 classflags; /* and run-time */ }; -/* Synthetic start class; is a regnode_charclass_class plus an SV*. Note that - * the 'next_off' field is unused, as the SSC stands alone, so there is never a - * next node. */ +/* A synthetic start class (SSC); is a regnode_charclass_posixl_fold, plus an + * extra SV*, used only during its construction and which is not used by + * regexec.c. Note that the 'next_off' field is unused, as the SSC stands + * alone, so there is never a next node. Also, there is no alignment issue, + * becase these are declared or allocated as a complete unit so the compiler + * takes care of alignment. This is unlike the other regnodes which are + * allocated in terms of multiples of a single-argument regnode. SSC nodes can + * have a pointer field because there is no alignment issue, and because it is + * set to NULL after construction, before any cloning of the pattern */ struct regnode_ssc { U8 flags; /* ANYOF_POSIXL bit must go here */ U8 type; U16 next_off; - U32 arg1; /* used as ptr in S_regclass */ + U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; /* both compile-time */ U32 classflags; /* and run-time */ - SV* invlist; /* list of code points matched */ + + /* Auxiliary, only used during construction; NULL afterwards: list of code + * points matched */ + SV* invlist; }; +/* We take advantage of 'next_off' not otherwise being used in the SSC by + * actually using it: by setting it to 1. This allows us to test and + * distinguish between an SSC and other ANYOF node types, as 'next_off' cannot + * otherwise be 1, because it is the offset to the next regnode expressed in + * units of regnodes. Since an ANYOF node contains extra fields, it adds up + * to 12 regnode units on 32-bit systems, (hence the minimum this can be (if + * not 0) is 11 there. Even if things get tightly packed on a 64-bit system, + * it still would be more than 1. */ +#define set_ANYOF_SYNTHETIC(n) STMT_START{ OP(n) = ANYOF; \ + NEXT_OFF(n) = 1; \ + } STMT_END +#define is_ANYOF_SYNTHETIC(n) (OP(n) == ANYOF && NEXT_OFF(n) == 1) + /* XXX fix this description. Impose a limit of REG_INFTY on various pattern matching operations to limit stack growth and to avoid "infinite" recursions. @@ -303,55 +351,50 @@ struct regnode_ssc { * reach this high). */ #define ANYOF_NONBITMAP_EMPTY ((U32) -1) -/* The information used to be stored as as combination of the ANYOF_UTF8 and - * ANYOF_NONBITMAP_NON_UTF8 bits in the flags field, but was moved out of there - * to free up a bit for other uses. This tries to hide the change from - * existing code as much as possible. Now, the data structure that goes in ARG - * is not allocated unless it is needed, and that is what is used to determine - * if there is something outside the bitmap. The code now assumes that if - * that structure exists, that any UTF-8 encoded string should be tried against - * it, but a non-UTF8-encoded string will be tried only if the - * ANYOF_NONBITMAP_NON_UTF8 bit is also set. */ -#define ANYOF_NONBITMAP(node) (ARG(node) != ANYOF_NONBITMAP_EMPTY) - -/* Flags for node->flags of ANYOF. These are in short supply, but there is one - * currently available. If more than this are needed, the ANYOF_LOCALE and - * ANYOF_POSIXL bits could be shared, making a space penalty for all locale - * nodes. Also, the ABOVE_LATIN1_ALL bit could be freed up by resorting to - * creating a swash containing everything above 255. This introduces a - * performance penalty. Better would be to split it off into a separate node, - * which actually would improve performance a bit by allowing regexec.c to test - * for a UTF-8 character being above 255 without having to call a function nor - * calculate its code point value. However, this solution might need to have a - * second node type, ANYOF_SYNTHETIC_ABOVE_LATIN1_ALL. Several flags are not - * used in synthetic start class (SSC) nodes, so could be shared should new - * flags be needed for SSCs. */ - -#define ANYOF_LOCALE 0x01 /* /l modifier */ - -/* The fold is calculated and stored in the bitmap where possible at compile - * time. However under locale, the actual folding varies depending on - * what the locale is at the time of execution, so it has to be deferred until - * then */ -#define ANYOF_LOC_FOLD 0x02 - -#define ANYOF_INVERT 0x04 +/* Flags for node->flags of ANYOF. These are in short supply, with none + * currently available. The ABOVE_LATIN1_ALL bit could be freed up + * by resorting to creating a swash containing everything above 255. This + * introduces a performance penalty. An option that wouldn't slow things down + * would be to split one of the two LOC flags out into a separate + * node, like what was done with ANYOF_NON_UTF8_NON_ASCII_ALL in commit + * 34fdef848b1687b91892ba55e9e0c3430e0770f6 (but which was reverted because it + * wasn't the best option available at the time), and using a LOC flag is + * probably better than that commit anyway. But it could be reinstated if we + * need a bit. The LOC flags are only for /l nodes; the reverted commit was + * only for /d, so there are no combinatorial issues. The LOC flag to use is + * probably the POSIXL one. + * Several flags are not used in synthetic start class (SSC) nodes, so could be + * shared should new flags be needed for SSCs, like ANYOF_EMPTY_STRING now. */ + +/* regexec.c is expecting this to be in the low bit */ +#define ANYOF_INVERT 0x01 /* For the SSC node only, which cannot be inverted, so is shared with that bit. * This means "Does this SSC match an empty string?" This is used only during * regex compilation. */ #define ANYOF_EMPTY_STRING ANYOF_INVERT +/* Are there things that will match only if the target string is encoded in + * UTF-8? (This is not set if ANYOF_AOVE_LATIN1_ALL is set) */ +#define ANYOF_UTF8 0x02 + +/* The fold is calculated and stored in the bitmap where possible at compile + * time. However under locale, the actual folding varies depending on + * what the locale is at the time of execution, so it has to be deferred until + * then */ +#define ANYOF_LOC_FOLD 0x04 + /* Set if this is a regnode_charclass_posixl vs a regnode_charclass. This * is used for runtime \d, \w, [:posix:], ..., which are used only in locale * and the optimizer's synthetic start class. Non-locale \d, etc are resolved - * at compile-time. Could be shared with ANYOF_LOCALE, forcing all locale - * nodes to be large */ + * at compile-time */ #define ANYOF_POSIXL 0x08 #define ANYOF_CLASS ANYOF_POSIXL #define ANYOF_LARGE ANYOF_POSIXL -/* Unused: 0x10. When using, be sure to change ANYOF_FLAGS_ALL below */ +/* Should we raise a warning if matching against an above-Unicode code point? + * */ +#define ANYOF_WARN_SUPER 0x10 /* Can match something outside the bitmap that isn't in utf8 */ #define ANYOF_NONBITMAP_NON_UTF8 0x20 @@ -362,13 +405,16 @@ struct regnode_ssc { /* Match all Latin1 characters that aren't ASCII when the target string is not * in utf8. */ -#define ANYOF_NON_UTF8_LATIN1_ALL 0x80 +#define ANYOF_NON_UTF8_NON_ASCII_ALL 0x80 + +#define ANYOF_FLAGS_ALL (0xff) -#define ANYOF_FLAGS_ALL (0xff & ~0x10) +#define ANYOF_LOCALE_FLAGS (ANYOF_LOC_FOLD | ANYOF_POSIXL) -#define ANYOF_LOCALE_FLAGS (ANYOF_LOCALE \ - |ANYOF_LOC_FOLD \ - |ANYOF_POSIXL) +/* These are the flags that apply to both regular ANYOF nodes and synthetic + * start class nodes during construction of the SSC. During finalization of + * the SSC, other of the flags could be added to it */ +#define ANYOF_COMMON_FLAGS (ANYOF_WARN_SUPER|ANYOF_UTF8) /* Character classes for node->classflags of ANYOF */ /* Should be synchronized with a table in regprop() */ @@ -476,9 +522,18 @@ struct regnode_ssc { && (((regnode_charclass_posixl*)(p))->classflags)) #define ANYOF_CLASS_TEST_ANY_SET(p) ANYOF_POSIXL_TEST_ANY_SET(p) -#define ANYOF_POSIXL_TEST_ALL_SET(p) \ - ((ANYOF_FLAGS(p) & ANYOF_POSIXL) \ - && ((regnode_charclass_posixl*) (p))->classflags == ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1) +/* Since an SSC always has this field, we don't have to test for that; nor do + * we want to because the bit isn't set for SSC during its construction */ +#define ANYOF_POSIXL_SSC_TEST_ANY_SET(p) \ + cBOOL(((regnode_ssc*)(p))->classflags) +#define ANYOF_POSIXL_SSC_TEST_ALL_SET(p) /* Are all bits set? */ \ + (((regnode_ssc*) (p))->classflags \ + == ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1) + +#define ANYOF_POSIXL_TEST_ALL_SET(p) \ + ((ANYOF_FLAGS(p) & ANYOF_POSIXL) \ + && ((regnode_charclass_posixl*) (p))->classflags \ + == ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1) #define ANYOF_POSIXL_OR(source, dest) STMT_START { (dest)->classflags |= (source)->classflags ; } STMT_END #define ANYOF_CLASS_OR(source, dest) ANYOF_POSIXL_OR((source), (dest)) @@ -515,18 +570,20 @@ struct regnode_ssc { #define EXTRA_SIZE(guy) ((sizeof(guy)-1)/sizeof(struct regnode)) -#define REG_SEEN_ZERO_LEN 0x00000001 -#define REG_SEEN_LOOKBEHIND 0x00000002 -#define REG_SEEN_GPOS 0x00000004 +#define REG_ZERO_LEN_SEEN 0x00000001 +#define REG_LOOKBEHIND_SEEN 0x00000002 +#define REG_GPOS_SEEN 0x00000004 /* spare */ -#define REG_SEEN_CANY 0x00000010 -#define REG_SEEN_SANY REG_SEEN_CANY /* src bckwrd cmpt */ -#define REG_SEEN_RECURSE 0x00000020 -#define REG_TOP_LEVEL_BRANCHES 0x00000040 -#define REG_SEEN_VERBARG 0x00000080 -#define REG_SEEN_CUTGROUP 0x00000100 -#define REG_SEEN_RUN_ON_COMMENT 0x00000200 -#define REG_SEEN_EXACTF_SHARP_S 0x00000400 +#define REG_CANY_SEEN 0x00000010 +#define REG_RECURSE_SEEN 0x00000020 +#define REG_TOP_LEVEL_BRANCHES_SEEN 0x00000040 +#define REG_VERBARG_SEEN 0x00000080 +#define REG_CUTGROUP_SEEN 0x00000100 +#define REG_RUN_ON_COMMENT_SEEN 0x00000200 +#define REG_UNFOLDED_MULTI_SEEN 0x00000400 +#define REG_GOSTART_SEEN 0x00000800 +#define REG_UNBOUNDED_QUANTIFIER_SEEN 0x00001000 + START_EXTERN_C