X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/a05353bfa2b031e0c0283559432496d3915c83b2..b35b96b6f8e35207d18b15dfcdbd0d08a7c6437c:/config_h.SH

diff --git a/config_h.SH b/config_h.SH
index 4cb1684..640d0a2 100755
--- a/config_h.SH
+++ b/config_h.SH
@@ -738,12 +738,6 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$i_niin I_NETINET_IN	/**/
 
-/* I_SFIO:
- *	This symbol, if defined, indicates to the C program that it should
- *	include <sfio.h>.
- */
-#$i_sfio	I_SFIO		/**/
-
 /* I_STDDEF:
  *	This symbol, if defined, indicates that <stddef.h> exists and should
  *	be included.
@@ -846,26 +840,6 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$i_syswait I_SYS_WAIT	/**/
 
-/* I_TERMIO:
- *	This symbol, if defined, indicates that the program should include
- *	<termio.h> rather than <sgtty.h>.  There are also differences in
- *	the ioctl() calls that depend on the value of this symbol.
- */
-/* I_TERMIOS:
- *	This symbol, if defined, indicates that the program should include
- *	the POSIX termios.h rather than sgtty.h or termio.h.
- *	There are also differences in the ioctl() calls that depend on the
- *	value of this symbol.
- */
-/* I_SGTTY:
- *	This symbol, if defined, indicates that the program should include
- *	<sgtty.h> rather than <termio.h>.  There are also differences in
- *	the ioctl() calls that depend on the value of this symbol.
- */
-#$i_termio I_TERMIO		/**/
-#$i_termios I_TERMIOS		/**/
-#$i_sgtty I_SGTTY		/**/
-
 /* I_UNISTD:
  *	This symbol, if defined, indicates to the C program that it should
  *	include <unistd.h>.
@@ -936,18 +910,6 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$multiarch MULTIARCH		/**/
 
-/* USE_CROSS_COMPILE:
- *	This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- *	This symbol, if defined, indicates the target architecture
- *	Perl has been cross-compiled to.  Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-#$usecrosscompile	USE_CROSS_COMPILE	/**/
-#define	PERL_TARGETARCH	"$targetarch"	/**/
-#endif
-
 /* MEM_ALIGNBYTES:
  *	This symbol contains the number of bytes required to align a
  *	double, or a long double when applicable. Usual values are 2,
@@ -1028,7 +990,7 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  *	so the default case (for NeXT) is big endian to catch them.
  *	This might matter for NeXT 3.0.
  */
-#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+#if defined(MULTIARCH)
 #  ifdef __LITTLE_ENDIAN__
 #    if LONGSIZE == 4
 #      define BYTEORDER 0x1234
@@ -3365,6 +3327,38 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
 #$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp"		/**/
 #$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem"		/**/
 
+/* I_TERMIO:
+ *	This symbol, if defined, indicates that the program should include
+ *	<termio.h> rather than <sgtty.h>.  There are also differences in
+ *	the ioctl() calls that depend on the value of this symbol.
+ */
+/* I_TERMIOS:
+ *	This symbol, if defined, indicates that the program should include
+ *	the POSIX termios.h rather than sgtty.h or termio.h.
+ *	There are also differences in the ioctl() calls that depend on the
+ *	value of this symbol.
+ */
+/* I_SGTTY:
+ *	This symbol, if defined, indicates that the program should include
+ *	<sgtty.h> rather than <termio.h>.  There are also differences in
+ *	the ioctl() calls that depend on the value of this symbol.
+ */
+#$i_termio I_TERMIO		/**/
+#$i_termios I_TERMIOS		/**/
+#$i_sgtty I_SGTTY		/**/
+
+/* USE_CROSS_COMPILE:
+ *	This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ *	This symbol, if defined, indicates the target architecture
+ *	Perl has been cross-compiled to.  Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+#$usecrosscompile	USE_CROSS_COMPILE	/**/
+#define	PERL_TARGETARCH	"$targetarch"	/**/
+#endif
+
 /* PERL_USE_DEVEL:
  *	This symbol, if defined, indicates that Perl was configured with
  *	-Dusedevel, to enable development features.  This should not be
@@ -3927,12 +3921,6 @@ sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un
  */
 #$d_setproctitle HAS_SETPROCTITLE		/**/
 
-/* USE_SFIO:
- *	This symbol, if defined, indicates that sfio should
- *	be used.
- */
-#$d_sfio	USE_SFIO		/**/
-
 /* HAS_SIGNBIT:
  *	This symbol, if defined, indicates that the signbit routine is
  *	available to check if the given number has the sign bit set.