X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/923e4eb5b872f0800559dcb72be02dea329298f2..10067d9ac787a7e27e17175ac3e209ef628b8aec:/cop.h diff --git a/cop.h b/cop.h index 12eecdc..5c80173 100644 --- a/cop.h +++ b/cop.h @@ -1,7 +1,7 @@ /* cop.h * * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, - * 2000, 2001, 2002, 2003, by Larry Wall and others + * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, by Larry Wall and others * * You may distribute under the terms of either the GNU General Public * License or the Artistic License, as specified in the README file. @@ -13,8 +13,132 @@ * and thus can be used to determine our current state. */ +/* A jmpenv packages the state required to perform a proper non-local jump. + * Note that there is a start_env initialized when perl starts, and top_env + * points to this initially, so top_env should always be non-null. + * + * Existence of a non-null top_env->je_prev implies it is valid to call + * longjmp() at that runlevel (we make sure start_env.je_prev is always + * null to ensure this). + * + * je_mustcatch, when set at any runlevel to TRUE, means eval ops must + * establish a local jmpenv to handle exception traps. Care must be taken + * to restore the previous value of je_mustcatch before exiting the + * stack frame iff JMPENV_PUSH was not called in that stack frame. + * GSAR 97-03-27 + */ + +struct jmpenv { + struct jmpenv * je_prev; + Sigjmp_buf je_buf; /* only for use if !je_throw */ + int je_ret; /* last exception thrown */ + bool je_mustcatch; /* need to call longjmp()? */ +}; + +typedef struct jmpenv JMPENV; + +#ifdef OP_IN_REGISTER +#define OP_REG_TO_MEM PL_opsave = op +#define OP_MEM_TO_REG op = PL_opsave +#else +#define OP_REG_TO_MEM NOOP +#define OP_MEM_TO_REG NOOP +#endif + +/* + * How to build the first jmpenv. + * + * top_env needs to be non-zero. It points to an area + * in which longjmp() stuff is stored, as C callstack + * info there at least is thread specific this has to + * be per-thread. Otherwise a 'die' in a thread gives + * that thread the C stack of last thread to do an eval {}! + */ + +#define JMPENV_BOOTSTRAP \ + STMT_START { \ + Zero(&PL_start_env, 1, JMPENV); \ + PL_start_env.je_ret = -1; \ + PL_start_env.je_mustcatch = TRUE; \ + PL_top_env = &PL_start_env; \ + } STMT_END + +/* + * PERL_FLEXIBLE_EXCEPTIONS + * + * All the flexible exceptions code has been removed. + * See the following threads for details: + * + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html + * + * Joshua's original patches (which weren't applied) and discussion: + * + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html + * + * Chip's reworked patch and discussion: + * + * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html + * + * The flaw in these patches (which went unnoticed at the time) was + * that they moved some code that could potentially die() out of the + * region protected by the setjmp()s. This caused exceptions within + * END blocks and such to not be handled by the correct setjmp(). + * + * The original patches that introduces flexible exceptions were: + * + * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386 + * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162 + */ + +#define dJMPENV JMPENV cur_env + +#define JMPENV_PUSH(v) \ + STMT_START { \ + DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \ + (void*)&cur_env, (void*)PL_top_env)); \ + cur_env.je_prev = PL_top_env; \ + OP_REG_TO_MEM; \ + cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \ + OP_MEM_TO_REG; \ + PL_top_env = &cur_env; \ + cur_env.je_mustcatch = FALSE; \ + (v) = cur_env.je_ret; \ + } STMT_END + +#define JMPENV_POP \ + STMT_START { \ + DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \ + (void*)PL_top_env, (void*)cur_env.je_prev)); \ + PL_top_env = cur_env.je_prev; \ + } STMT_END + +#define JMPENV_JUMP(v) \ + STMT_START { \ + OP_REG_TO_MEM; \ + if (PL_top_env->je_prev) \ + PerlProc_longjmp(PL_top_env->je_buf, (v)); \ + if ((v) == 2) \ + PerlProc_exit(STATUS_EXIT); \ + PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \ + PerlProc_exit(1); \ + } STMT_END + +#define CATCH_GET (PL_top_env->je_mustcatch) +#define CATCH_SET(v) (PL_top_env->je_mustcatch = (v)) + + +#include "mydtrace.h" + struct cop { BASEOP + /* On LP64 putting this here takes advantage of the fact that BASEOP isn't + an exact multiple of 8 bytes to save structure padding. */ + line_t cop_line; /* line # of this command */ char * cop_label; /* label for this construct */ #ifdef USE_ITHREADS char * cop_stashpv; /* package line was compiled in */ @@ -23,71 +147,89 @@ struct cop { HV * cop_stash; /* package line was compiled in */ GV * cop_filegv; /* file the following line # is from */ #endif + U32 cop_hints; /* hints bits from pragmata */ U32 cop_seq; /* parse sequence number */ - I32 cop_arybase; /* array base this line was compiled with */ - line_t cop_line; /* line # of this command */ - SV * cop_warnings; /* lexical warnings bitmask */ - SV * cop_io; /* lexical IO defaults */ + /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */ + STRLEN * cop_warnings; /* lexical warnings bitmask */ + /* compile time state of %^H. See the comment in op.c for how this is + used to recreate a hash to return from caller. */ + struct refcounted_he * cop_hints_hash; }; -#define Nullcop Null(COP*) - #ifdef USE_ITHREADS # define CopFILE(c) ((c)->cop_file) # define CopFILEGV(c) (CopFILE(c) \ - ? gv_fetchfile(CopFILE(c)) : Nullgv) + ? gv_fetchfile(CopFILE(c)) : NULL) - #ifdef NETWARE - #define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv)) - #else - #define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv)) - #endif +# ifdef NETWARE +# define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv)) +# define CopFILE_setn(c,pv,l) ((c)->cop_file = savepv((pv),(l))) +# else +# define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv)) +# define CopFILE_setn(c,pv,l) ((c)->cop_file = savesharedpvn((pv),(l))) +# endif # define CopFILESV(c) (CopFILE(c) \ - ? GvSV(gv_fetchfile(CopFILE(c))) : Nullsv) + ? GvSV(gv_fetchfile(CopFILE(c))) : NULL) # define CopFILEAV(c) (CopFILE(c) \ - ? GvAV(gv_fetchfile(CopFILE(c))) : Nullav) + ? GvAV(gv_fetchfile(CopFILE(c))) : NULL) +# ifdef DEBUGGING +# define CopFILEAVx(c) (assert(CopFILE(c)), \ + GvAV(gv_fetchfile(CopFILE(c)))) +# else +# define CopFILEAVx(c) (GvAV(gv_fetchfile(CopFILE(c)))) +# endif # define CopSTASHPV(c) ((c)->cop_stashpv) - #ifdef NETWARE - #define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : Nullch)) - #else - #define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv)) - #endif +# ifdef NETWARE +# define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : NULL)) +# else +# define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv)) +# endif # define CopSTASH(c) (CopSTASHPV(c) \ - ? gv_stashpv(CopSTASHPV(c),GV_ADD) : Nullhv) -# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME(hv) : Nullch) -# define CopSTASH_eq(c,hv) ((hv) \ - && (CopSTASHPV(c) == HvNAME(hv) \ - || (CopSTASHPV(c) && HvNAME(hv) \ - && strEQ(CopSTASHPV(c), HvNAME(hv))))) - #ifdef NETWARE - #define CopSTASH_free(c) SAVECOPSTASH_FREE(c) - #else - #define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c)) - #endif - - #ifdef NETWARE - #define CopFILE_free(c) SAVECOPFILE_FREE(c) - #else - #define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = Nullch)) - #endif + ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL) +# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL) +# define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv)) +# define CopLABEL(c) ((c)->cop_label) +# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv)) +# ifdef NETWARE +# define CopSTASH_free(c) SAVECOPSTASH_FREE(c) +# define CopFILE_free(c) SAVECOPFILE_FREE(c) +# define CopLABEL_free(c) SAVECOPLABEL_FREE(c) +# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL) +# else +# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c)) +# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL)) +# define CopLABEL_free(c) (PerlMemShared_free(CopLABEL(c)),(CopLABEL(c) = NULL)) +# define CopLABEL_alloc(pv) ((pv)?savesharedpv(pv):NULL) +# endif #else # define CopFILEGV(c) ((c)->cop_filegv) # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv)) # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv)) -# define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : Nullsv) -# define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : Nullav) -# define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : Nullch) +# define CopFILE_setn(c,pv,l) CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0)) +# define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL) +# define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL) +# ifdef DEBUGGING +# define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c))) +# else +# define CopFILEAVx(c) (GvAV(CopFILEGV(c))) +# endif +# define CopFILE(c) (CopFILEGV(c) && GvSV(CopFILEGV(c)) \ + ? SvPVX(GvSV(CopFILEGV(c))) : NULL) # define CopSTASH(c) ((c)->cop_stash) +# define CopLABEL(c) ((c)->cop_label) # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv)) -# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME(CopSTASH(c)) : Nullch) +# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL) /* cop_stash is not refcounted */ # define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD)) # define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv)) +# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL) +# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv)) # define CopSTASH_free(c) -# define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = Nullgv)) +# define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL)) +# define CopLABEL_free(c) (Safefree(CopLABEL(c)),(CopLABEL(c) = NULL)) #endif /* USE_ITHREADS */ @@ -104,6 +246,33 @@ struct cop { # define OutCopFILE(c) CopFILE(c) #endif +/* If $[ is non-zero, it's stored in cop_hints under the key "$[", and + HINT_ARYBASE is set to indicate this. + Setting it is ineficient due to the need to create 2 mortal SVs, but as + using $[ is highly discouraged, no sane Perl code will be using it. */ +#define CopARYBASE_get(c) \ + ((CopHINTS_get(c) & HINT_ARYBASE) \ + ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \ + "$[", 2, 0, 0)) \ + : 0) +#define CopARYBASE_set(c, b) STMT_START { \ + if (b || ((c)->cop_hints & HINT_ARYBASE)) { \ + (c)->cop_hints |= HINT_ARYBASE; \ + if ((c) == &PL_compiling) \ + PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \ + (c)->cop_hints_hash \ + = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \ + newSVpvs_flags("$[", SVs_TEMP), \ + sv_2mortal(newSViv(b))); \ + } \ + } STMT_END + +/* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */ +#define CopHINTS_get(c) ((c)->cop_hints + 0) +#define CopHINTS_set(c, h) STMT_START { \ + (c)->cop_hints = (h); \ + } STMT_END + /* * Here we have some enormously heavy (or at least ponderous) wizardry. */ @@ -115,17 +284,32 @@ struct block_sub { GV * dfoutgv; AV * savearray; AV * argarray; - long olddepth; + I32 olddepth; U8 hasargs; U8 lval; /* XXX merge lval and hasargs? */ PAD *oldcomppad; + OP * retop; /* op to execute on exit from sub */ }; -/* base for the next two macros. Don't use directly */ +/* base for the next two macros. Don't use directly. + * Note that the refcnt of the cv is incremented twice; The CX one is + * decremented by LEAVESUB, the other by LEAVE. */ + #define PUSHSUB_BASE(cx) \ + ENTRY_PROBE(GvENAME(CvGV(cv)), \ + CopFILE((COP*)CvSTART(cv)), \ + CopLINE((COP*)CvSTART(cv))); \ + \ cx->blk_sub.cv = cv; \ cx->blk_sub.olddepth = CvDEPTH(cv); \ - cx->blk_sub.hasargs = hasargs; + cx->blk_sub.hasargs = hasargs; \ + cx->blk_sub.retop = NULL; \ + if (!CvDEPTH(cv)) { \ + SvREFCNT_inc_simple_void_NN(cv); \ + SvREFCNT_inc_simple_void_NN(cv); \ + SAVEFREESV(cv); \ + } + #define PUSHSUB(cx) \ PUSHSUB_BASE(cx) \ @@ -138,12 +322,13 @@ struct block_sub { cx->blk_sub.lval = 0; -#define PUSHFORMAT(cx) \ +#define PUSHFORMAT(cx, retop) \ cx->blk_sub.cv = cv; \ cx->blk_sub.gv = gv; \ + cx->blk_sub.retop = (retop); \ cx->blk_sub.hasargs = 0; \ cx->blk_sub.dfoutgv = PL_defoutgv; \ - (void)SvREFCNT_inc(cx->blk_sub.dfoutgv) + SvREFCNT_inc_void(cx->blk_sub.dfoutgv) #define POP_SAVEARRAY() \ STMT_START { \ @@ -156,21 +341,25 @@ struct block_sub { #define CLEAR_ARGARRAY(ary) \ STMT_START { \ AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \ - SvPVX(ary) = (char*)AvALLOC(ary); \ + AvARRAY(ary) = AvALLOC(ary); \ AvFILLp(ary) = -1; \ } STMT_END #define POPSUB(cx,sv) \ STMT_START { \ + RETURN_PROBE(GvENAME(CvGV((CV*)cx->blk_sub.cv)), \ + CopFILE((COP*)CvSTART((CV*)cx->blk_sub.cv)), \ + CopLINE((COP*)CvSTART((CV*)cx->blk_sub.cv))); \ + \ if (cx->blk_sub.hasargs) { \ POP_SAVEARRAY(); \ /* abandon @_ if it got reified */ \ if (AvREAL(cx->blk_sub.argarray)) { \ - SSize_t fill = AvFILLp(cx->blk_sub.argarray); \ + const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \ SvREFCNT_dec(cx->blk_sub.argarray); \ cx->blk_sub.argarray = newAV(); \ av_extend(cx->blk_sub.argarray, fill); \ - AvFLAGS(cx->blk_sub.argarray) = AVf_REIFY; \ + AvREIFY_only(cx->blk_sub.argarray); \ CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \ } \ else { \ @@ -179,7 +368,7 @@ struct block_sub { } \ sv = (SV*)cx->blk_sub.cv; \ if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \ - sv = Nullsv; \ + sv = NULL; \ } STMT_END #define LEAVESUB(sv) \ @@ -194,22 +383,26 @@ struct block_sub { /* eval context */ struct block_eval { - I32 old_in_eval; - I32 old_op_type; + U8 old_in_eval; + U16 old_op_type; SV * old_namesv; OP * old_eval_root; SV * cur_text; CV * cv; + OP * retop; /* op to execute on exit from eval */ + JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */ }; #define PUSHEVAL(cx,n,fgv) \ STMT_START { \ cx->blk_eval.old_in_eval = PL_in_eval; \ cx->blk_eval.old_op_type = PL_op->op_type; \ - cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : Nullsv); \ + cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \ cx->blk_eval.old_eval_root = PL_eval_root; \ - cx->blk_eval.cur_text = PL_linestr; \ - cx->blk_eval.cv = Nullcv; /* set by doeval(), as applicable */ \ + cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \ + cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \ + cx->blk_eval.retop = NULL; \ + cx->blk_eval.cur_top_env = PL_top_env; \ } STMT_END #define POPEVAL(cx) \ @@ -225,21 +418,39 @@ struct block_eval { struct block_loop { char * label; I32 resetsp; - OP * redo_op; - OP * next_op; - OP * last_op; + LOOP * my_op; /* My op, that contains redo, next and last ops. */ + /* (except for non_ithreads we need to modify next_op in pp_ctl.c, hence + why next_op is conditionally defined below.) */ #ifdef USE_ITHREADS void * iterdata; PAD *oldcomppad; #else + OP * next_op; SV ** itervar; #endif SV * itersave; + /* (from inspection of source code) for a .. range of strings this is the + current string. */ SV * iterlval; + /* (from inspection of source code) for a foreach loop this is the array + being iterated over. For a .. range of numbers it's the current value. + A check is often made on the SvTYPE of iterary to determine whether + we are iterating over an array or a range. (numbers or strings) */ AV * iterary; IV iterix; + /* (from inspection of source code) for a .. range of numbers this is the + maximum value. */ IV itermax; }; +/* It might be possible to squeeze this structure further. As best I can tell + itermax and iterlval are never used at the same time, so it might be possible + to make them into a union. However, I'm not confident that there are enough + flag bits/NULLable pointers in this structure alone to encode which is + active. There is, however, U8 of space free in struct block, which could be + used. Right now it may not be worth squeezing this structure further, as it's + the largest part of struct block, and currently struct block is 64 bytes on + an ILP32 system, which will give good cache alignment. +*/ #ifdef USE_ITHREADS # define CxITERVAR(c) \ @@ -254,56 +465,80 @@ struct block_loop { if ((cx->blk_loop.iterdata = (idata))) \ cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \ else \ - cx->blk_loop.itersave = Nullsv; + cx->blk_loop.itersave = NULL; #else # define CxITERVAR(c) ((c)->blk_loop.itervar) # define CX_ITERDATA_SET(cx,ivar) \ if ((cx->blk_loop.itervar = (SV**)(ivar))) \ cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \ else \ - cx->blk_loop.itersave = Nullsv; + cx->blk_loop.itersave = NULL; +#endif +#define CxLABEL(c) (0 + (c)->blk_loop.label) + +#ifdef USE_ITHREADS +# define PUSHLOOP_OP_NEXT /* No need to do anything. */ +# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.my_op->op_nextop + 0) +#else +# define PUSHLOOP_OP_NEXT cx->blk_loop.next_op = cLOOP->op_nextop +# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.next_op + 0) #endif #define PUSHLOOP(cx, dat, s) \ cx->blk_loop.label = PL_curcop->cop_label; \ cx->blk_loop.resetsp = s - PL_stack_base; \ - cx->blk_loop.redo_op = cLOOP->op_redoop; \ - cx->blk_loop.next_op = cLOOP->op_nextop; \ - cx->blk_loop.last_op = cLOOP->op_lastop; \ - cx->blk_loop.iterlval = Nullsv; \ - cx->blk_loop.iterary = Nullav; \ + cx->blk_loop.my_op = cLOOP; \ + PUSHLOOP_OP_NEXT; \ + cx->blk_loop.iterlval = NULL; \ + cx->blk_loop.iterary = NULL; \ cx->blk_loop.iterix = -1; \ CX_ITERDATA_SET(cx,dat); #define POPLOOP(cx) \ SvREFCNT_dec(cx->blk_loop.iterlval); \ if (CxITERVAR(cx)) { \ - SV **s_v_p = CxITERVAR(cx); \ - sv_2mortal(*s_v_p); \ - *s_v_p = cx->blk_loop.itersave; \ + if (SvPADMY(cx->blk_loop.itersave)) { \ + SV ** const s_v_p = CxITERVAR(cx); \ + sv_2mortal(*s_v_p); \ + *s_v_p = cx->blk_loop.itersave; \ + } \ + else { \ + SvREFCNT_dec(cx->blk_loop.itersave); \ + } \ } \ if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\ SvREFCNT_dec(cx->blk_loop.iterary); +/* given/when context */ +struct block_givwhen { + OP *leave_op; +}; + +#define PUSHGIVEN(cx) \ + cx->blk_givwhen.leave_op = cLOGOP->op_other; + +#define PUSHWHEN PUSHGIVEN + /* context common to subroutines, evals and loops */ struct block { + U16 blku_type; /* what kind of context this is */ + U8 blku_gimme; /* is this block running in list context? */ + U8 blku_spare; /* Padding to match with struct subst */ I32 blku_oldsp; /* stack pointer to copy stuff down to */ COP * blku_oldcop; /* old curcop pointer */ - I32 blku_oldretsp; /* return stack index */ I32 blku_oldmarksp; /* mark stack index */ I32 blku_oldscopesp; /* scope stack index */ PMOP * blku_oldpm; /* values of pattern match vars */ - U8 blku_gimme; /* is this block running in list context? */ union { struct block_sub blku_sub; struct block_eval blku_eval; struct block_loop blku_loop; + struct block_givwhen blku_givwhen; } blk_u; }; #define blk_oldsp cx_u.cx_blk.blku_oldsp #define blk_oldcop cx_u.cx_blk.blku_oldcop -#define blk_oldretsp cx_u.cx_blk.blku_oldretsp #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp #define blk_oldpm cx_u.cx_blk.blku_oldpm @@ -311,6 +546,7 @@ struct block { #define blk_sub cx_u.cx_blk.blk_u.blku_sub #define blk_eval cx_u.cx_blk.blk_u.blku_eval #define blk_loop cx_u.cx_blk.blk_u.blku_loop +#define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen /* Enter a block. */ #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \ @@ -319,7 +555,6 @@ struct block { cx->blk_oldcop = PL_curcop, \ cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \ cx->blk_oldscopesp = PL_scopestack_ix, \ - cx->blk_oldretsp = PL_retstack_ix, \ cx->blk_oldpm = PL_curpm, \ cx->blk_gimme = (U8)gimme; \ DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \ @@ -331,7 +566,6 @@ struct block { PL_curcop = cx->blk_oldcop, \ PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \ PL_scopestack_ix = cx->blk_oldscopesp, \ - PL_retstack_ix = cx->blk_oldretsp, \ pm = cx->blk_oldpm, \ gimme = cx->blk_gimme; \ DEBUG_SCOPE("POPBLOCK"); \ @@ -343,18 +577,18 @@ struct block { PL_stack_sp = PL_stack_base + cx->blk_oldsp, \ PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \ PL_scopestack_ix = cx->blk_oldscopesp, \ - PL_retstack_ix = cx->blk_oldretsp, \ PL_curpm = cx->blk_oldpm; \ DEBUG_SCOPE("TOPBLOCK"); /* substitution context */ struct subst { + U16 sbu_type; /* what kind of context this is */ + U8 sbu_once; /* Actually both booleans, but U8 to matches */ + U8 sbu_rxtainted; /* struct block */ I32 sbu_iters; I32 sbu_maxiters; I32 sbu_rflags; I32 sbu_oldsave; - bool sbu_once; - bool sbu_rxtainted; char * sbu_orig; SV * sbu_dstr; SV * sbu_targ; @@ -392,21 +626,23 @@ struct subst { cx->sb_s = s, \ cx->sb_m = m, \ cx->sb_strend = strend, \ - cx->sb_rxres = Null(void*), \ + cx->sb_rxres = NULL, \ cx->sb_rx = rx, \ cx->cx_type = CXt_SUBST; \ - rxres_save(&cx->sb_rxres, rx) + rxres_save(&cx->sb_rxres, rx); \ + (void)ReREFCNT_inc(rx) #define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \ - rxres_free(&cx->sb_rxres) + rxres_free(&cx->sb_rxres); \ + ReREFCNT_dec(cx->sb_rx) struct context { - U32 cx_type; /* what kind of context this is */ union { struct block cx_blk; struct subst cx_subst; } cx_u; }; +#define cx_type cx_u.cx_subst.sbu_type #define CXTYPEMASK 0xff #define CXt_NULL 0 @@ -416,13 +652,21 @@ struct context { #define CXt_SUBST 4 #define CXt_BLOCK 5 #define CXt_FORMAT 6 +#define CXt_GIVEN 7 +#define CXt_WHEN 8 + +/* private flags for CXt_SUB and CXt_NULL */ +#define CXp_MULTICALL 0x00000400 /* part of a multicall (so don't + tear down context on exit). */ /* private flags for CXt_EVAL */ #define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */ #define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */ -#ifdef USE_ITHREADS /* private flags for CXt_LOOP */ +#define CXp_FOREACH 0x00000200 /* a foreach loop */ +#define CXp_FOR_DEF 0x00000400 /* foreach using $_ */ +#ifdef USE_ITHREADS # define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata has pad offset; if not set, iterdata holds GV* */ @@ -431,10 +675,16 @@ struct context { #endif #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK) -#define CxREALEVAL(c) (((c)->cx_type & (CXt_EVAL|CXp_REAL)) \ +#define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \ + == CXp_MULTICALL) +#define CxREALEVAL(c) (((c)->cx_type & (CXTYPEMASK|CXp_REAL)) \ == (CXt_EVAL|CXp_REAL)) -#define CxTRYBLOCK(c) (((c)->cx_type & (CXt_EVAL|CXp_TRYBLOCK)) \ +#define CxTRYBLOCK(c) (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK)) \ == (CXt_EVAL|CXp_TRYBLOCK)) +#define CxFOREACH(c) (((c)->cx_type & (CXTYPEMASK|CXp_FOREACH)) \ + == (CXt_LOOP|CXp_FOREACH)) +#define CxFOREACHDEF(c) (((c)->cx_type & (CXTYPEMASK|CXp_FOREACH|CXp_FOR_DEF))\ + == (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF)) #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc())) @@ -476,12 +726,16 @@ L. #define G_VOID 128 /* skip this bit when adding flags below */ /* extra flags for Perl_call_* routines */ -#define G_DISCARD 2 /* Call FREETMPS. */ +#define G_DISCARD 2 /* Call FREETMPS. + Don't change this without consulting the + hash actions codes defined in hv.h */ #define G_EVAL 4 /* Assume eval {} around subroutine call. */ #define G_NOARGS 8 /* Don't construct a @_ array. */ #define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */ #define G_NODEBUG 32 /* Disable debugging at toplevel. */ #define G_METHOD 64 /* Calling method. */ +#define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or + fold_constants. */ /* flag bits for PL_in_eval */ #define EVAL_NULL 0 /* not in an eval */ @@ -509,11 +763,11 @@ L. struct stackinfo { AV * si_stack; /* stack for current runlevel */ PERL_CONTEXT * si_cxstack; /* context stack for runlevel */ + struct stackinfo * si_prev; + struct stackinfo * si_next; I32 si_cxix; /* current context index */ I32 si_cxmax; /* maximum allocated index */ I32 si_type; /* type of runlevel */ - struct stackinfo * si_prev; - struct stackinfo * si_next; I32 si_markoff; /* offset where markstack begins for us. * currently used only with DEBUGGING, * but not #ifdef-ed for bincompat */ @@ -555,7 +809,7 @@ typedef struct stackinfo PERL_SI; #define POPSTACK \ STMT_START { \ dSP; \ - PERL_SI *prev = PL_curstackinfo->si_prev; \ + PERL_SI * const prev = PL_curstackinfo->si_prev; \ if (!prev) { \ PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \ my_exit(1); \ @@ -576,3 +830,76 @@ typedef struct stackinfo PERL_SI; #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling) #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling) +/* +=head1 Multicall Functions + +=for apidoc Ams||dMULTICALL +Declare local variables for a multicall. See L. + +=for apidoc Ams||PUSH_MULTICALL +Opening bracket for a lightweight callback. +See L. + +=for apidoc Ams||MULTICALL +Make a lightweight callback. See L. + +=for apidoc Ams||POP_MULTICALL +Closing bracket for a lightweight callback. +See L. + +=cut +*/ + +#define dMULTICALL \ + SV **newsp; /* set by POPBLOCK */ \ + PERL_CONTEXT *cx; \ + CV *multicall_cv; \ + OP *multicall_cop; \ + bool multicall_oldcatch; \ + U8 hasargs = 0 /* used by PUSHSUB */ + +#define PUSH_MULTICALL(the_cv) \ + STMT_START { \ + CV * const _nOnclAshIngNamE_ = the_cv; \ + CV * const cv = _nOnclAshIngNamE_; \ + AV * const padlist = CvPADLIST(cv); \ + ENTER; \ + multicall_oldcatch = CATCH_GET; \ + SAVETMPS; SAVEVPTR(PL_op); \ + CATCH_SET(TRUE); \ + PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \ + PUSHSUB(cx); \ + if (++CvDEPTH(cv) >= 2) { \ + PERL_STACK_OVERFLOW_CHECK(); \ + Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \ + } \ + SAVECOMPPAD(); \ + PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \ + multicall_cv = cv; \ + multicall_cop = CvSTART(cv); \ + } STMT_END + +#define MULTICALL \ + STMT_START { \ + PL_op = multicall_cop; \ + CALLRUNOPS(aTHX); \ + } STMT_END + +#define POP_MULTICALL \ + STMT_START { \ + LEAVESUB(multicall_cv); \ + CvDEPTH(multicall_cv)--; \ + POPBLOCK(cx,PL_curpm); \ + CATCH_SET(multicall_oldcatch); \ + LEAVE; \ + } STMT_END + +/* + * Local variables: + * c-indentation-style: bsd + * c-basic-offset: 4 + * indent-tabs-mode: t + * End: + * + * ex: set ts=8 sts=4 sw=4 noet: + */