X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/888911fcc68a18021b42aeaddb5cb8725ce411af..4fdcb09baafee5a8d18f22e92f6336a504d38b63:/perlio.h

diff --git a/perlio.h b/perlio.h
index 9af62f5..1a3d480 100644
--- a/perlio.h
+++ b/perlio.h
@@ -1,32 +1,139 @@
-#ifndef H_PERLIO
-#define H_PERLIO 1
-
-/* Clean up (or at least document) the various possible #defines.
-   This section attempts to match the 5.003_03 Configure variables
-   onto the 5.003_02 header file values.
-   I can't figure out where USE_STDIO was supposed to be set.
-   --AD
+/*    perlio.h
+ *
+ *    Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003,
+ *    2004, 2005, 2006, 2007, by Larry Wall and others
+ *
+ *    You may distribute under the terms of either the GNU General Public
+ *    License or the Artistic License, as specified in the README file.
+ *
+ */
+
+#ifndef _PERLIO_H
+#define _PERLIO_H
+/*
+  Interface for perl to IO functions.
+  There is a hierarchy of Configure determined #define controls:
+   USE_STDIO   - No longer available via Configure.  Formerly forced
+                 PerlIO_xxx() to be #define-d onto stdio functions.
+                 Now generates compile-time error.
+
+   USE_PERLIO  - The primary Configure variable that enables PerlIO.
+                 PerlIO_xxx() are real functions
+                 defined in perlio.c which implement extra functionality
+                 required for utf8 support.
+
 */
+
 #ifndef USE_PERLIO
-# define PERLIO_IS_STDIO
+# define USE_STDIO
 #endif
 
-/* Below is the 5.003_02 stuff. */
 #ifdef USE_STDIO
-#  ifndef PERLIO_IS_STDIO
-#      define PERLIO_IS_STDIO
+#  error "stdio is no longer supported as the default base layer -- use perlio."
+#endif
+
+/* --------------------  End of Configure controls ---------------------------- */
+
+/*
+ * Although we may not want stdio to be used including <stdio.h> here
+ * avoids issues where stdio.h has strange side effects
+ */
+#include <stdio.h>
+
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
+#define ftell ftello
+#endif
+
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
+#define fseek fseeko
+#endif
+
+/* BS2000 includes are sometimes a bit non standard :-( */
+#if defined(POSIX_BC) && defined(O_BINARY) && !defined(O_TEXT)
+#undef O_BINARY
+#endif
+
+#ifndef PerlIO
+/* ----------- PerlIO implementation ---------- */
+/* PerlIO not #define-d to something else - define the implementation */
+
+typedef struct _PerlIO PerlIOl;
+typedef struct _PerlIO_funcs PerlIO_funcs;
+typedef PerlIOl *PerlIO;
+#define PerlIO PerlIO
+#define PERLIO_LAYERS 1
+
+/* PERLIO_FUNCS_CONST is now on by default for efficiency, PERLIO_FUNCS_CONST
+   can be removed 1 day once stable & then PerlIO vtables are permanently RO */
+#ifdef PERLIO_FUNCS_CONST
+#define PERLIO_FUNCS_DECL(funcs) const PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (PerlIO_funcs*)(funcs)
+#else
+#define PERLIO_FUNCS_DECL(funcs) PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (funcs)
+#endif
+
+PERL_CALLCONV void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
+PERL_CALLCONV PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name,
+                                              STRLEN len,
+				              int load);
+PERL_CALLCONV PerlIO *PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab),
+			          const char *mode, SV *arg);
+PERL_CALLCONV void PerlIO_pop(pTHX_ PerlIO *f);
+PERL_CALLCONV AV* PerlIO_get_layers(pTHX_ PerlIO *f);
+PERL_CALLCONV void PerlIO_clone(pTHX_ PerlInterpreter *proto,
+                                CLONE_PARAMS *param);
+
+#endif				/* PerlIO */
+
+/* ----------- End of implementation choices  ---------- */
+
+/* We now need to determine  what happens if source trys to use stdio.
+ * There are three cases based on PERLIO_NOT_STDIO which XS code
+ * can set how it wants.
+ */
+
+#ifdef PERL_CORE
+/* Make a choice for perl core code
+   - currently this is set to try and catch lingering raw stdio calls.
+     This is a known issue with some non UNIX ports which still use
+     "native" stdio features.
+*/
+#  ifndef PERLIO_NOT_STDIO
+#    define PERLIO_NOT_STDIO 1
 #  endif
 #else
-extern void PerlIO_init _((void));
+#  ifndef PERLIO_NOT_STDIO
+#    define PERLIO_NOT_STDIO 0
+#  endif
 #endif
 
-#include "perlsdio.h"
+#ifdef PERLIO_NOT_STDIO
+#if PERLIO_NOT_STDIO
+/*
+ * PERLIO_NOT_STDIO #define'd as 1
+ * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
+ */
+#include "nostdio.h"
+#else				/* if PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO #define'd as 0
+ * Case 2: Declares that both PerlIO and stdio can be used
+ */
+#endif				/* if PERLIO_NOT_STDIO */
+#else				/* ifdef PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO not defined
+ * Case 3: Try and fake stdio calls as PerlIO calls
+ */
+#include "fakesdio.h"
+#endif				/* ifndef PERLIO_NOT_STDIO */
 
-#ifndef PERLIO_IS_STDIO
-#ifdef USE_SFIO
-#include "perlsfio.h"
-#endif /* USE_SFIO */
-#endif /* PERLIO_IS_STDIO */
+/* ----------- fill in things that have not got #define'd  ---------- */
+
+#ifndef Fpos_t
+#define Fpos_t Off_t
+#endif
 
 #ifndef EOF
 #define EOF (-1)
@@ -37,6 +144,11 @@ extern void PerlIO_init _((void));
 #define BUFSIZ 1024
 #endif
 
+/* The default buffer size for the perlio buffering layer */
+#ifndef PERLIOBUF_DEFAULT_BUFSIZ
+#define PERLIOBUF_DEFAULT_BUFSIZ (BUFSIZ > 8192 ? BUFSIZ : 8192)
+#endif
+
 #ifndef SEEK_SET
 #define SEEK_SET 0
 #endif
@@ -49,151 +161,183 @@ extern void PerlIO_init _((void));
 #define SEEK_END 2
 #endif
 
-#ifndef PerlIO
-struct _PerlIO;
-#define PerlIO struct _PerlIO
-#endif /* No PerlIO */
+#define PERLIO_DUP_CLONE	1
+#define PERLIO_DUP_FD		2
 
-#ifndef Fpos_t
-#define Fpos_t long
-#endif
+/* --------------------- Now prototypes for functions --------------- */
 
-#ifndef NEXT30_NO_ATTRIBUTE
-#ifndef HASATTRIBUTE       /* disable GNU-cc attribute checking? */
-#ifdef  __attribute__      /* Avoid possible redefinition errors */
-#undef  __attribute__
-#endif
-#define __attribute__(attr)
+START_EXTERN_C
+#ifndef __attribute__format__
+#  ifdef HASATTRIBUTE_FORMAT
+#    define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
+#  else
+#    define __attribute__format__(x,y,z)
+#  endif
 #endif
+#ifndef PerlIO_init
+PERL_CALLCONV void PerlIO_init(pTHX);
 #endif
-
 #ifndef PerlIO_stdoutf
-extern int	PerlIO_stdoutf		_((const char *,...))
-					__attribute__((format (printf, 1, 2)));
+PERL_CALLCONV int PerlIO_stdoutf(const char *, ...)
+    __attribute__format__(__printf__, 1, 2);
 #endif
 #ifndef PerlIO_puts
-extern int	PerlIO_puts		_((PerlIO *,const char *));
+PERL_CALLCONV int PerlIO_puts(PerlIO *, const char *);
 #endif
 #ifndef PerlIO_open
-extern PerlIO *	PerlIO_open		_((const char *,const char *));
+PERL_CALLCONV PerlIO *PerlIO_open(const char *, const char *);
 #endif
-#ifndef PerlIO_close
-extern int	PerlIO_close		_((PerlIO *));
+#ifndef PerlIO_openn
+PERL_CALLCONV PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
+				   int fd, int imode, int perm, PerlIO *old,
+				   int narg, SV **arg);
 #endif
 #ifndef PerlIO_eof
-extern int	PerlIO_eof		_((PerlIO *));
+PERL_CALLCONV int PerlIO_eof(PerlIO *);
 #endif
 #ifndef PerlIO_error
-extern int	PerlIO_error		_((PerlIO *));
+PERL_CALLCONV int PerlIO_error(PerlIO *);
 #endif
 #ifndef PerlIO_clearerr
-extern void	PerlIO_clearerr		_((PerlIO *));
+PERL_CALLCONV void PerlIO_clearerr(PerlIO *);
 #endif
 #ifndef PerlIO_getc
-extern int	PerlIO_getc		_((PerlIO *));
+PERL_CALLCONV int PerlIO_getc(PerlIO *);
 #endif
 #ifndef PerlIO_putc
-extern int	PerlIO_putc		_((PerlIO *,int));
-#endif
-#ifndef PerlIO_flush
-extern int	PerlIO_flush		_((PerlIO *));
+PERL_CALLCONV int PerlIO_putc(PerlIO *, int);
 #endif
 #ifndef PerlIO_ungetc
-extern int	PerlIO_ungetc		_((PerlIO *,int));
-#endif
-#ifndef PerlIO_fileno
-extern int	PerlIO_fileno		_((PerlIO *));
+PERL_CALLCONV int PerlIO_ungetc(PerlIO *, int);
 #endif
 #ifndef PerlIO_fdopen
-extern PerlIO *	PerlIO_fdopen		_((int, const char *));
+PERL_CALLCONV PerlIO *PerlIO_fdopen(int, const char *);
 #endif
 #ifndef PerlIO_importFILE
-extern PerlIO *	PerlIO_importFILE	_((FILE *,int));
+PERL_CALLCONV PerlIO *PerlIO_importFILE(FILE *, const char *);
 #endif
 #ifndef PerlIO_exportFILE
-extern FILE *	PerlIO_exportFILE	_((PerlIO *,int));
+PERL_CALLCONV FILE *PerlIO_exportFILE(PerlIO *, const char *);
 #endif
 #ifndef PerlIO_findFILE
-extern FILE *	PerlIO_findFILE		_((PerlIO *));
+PERL_CALLCONV FILE *PerlIO_findFILE(PerlIO *);
 #endif
 #ifndef PerlIO_releaseFILE
-extern void	PerlIO_releaseFILE	_((PerlIO *,FILE *));
+PERL_CALLCONV void PerlIO_releaseFILE(PerlIO *, FILE *);
 #endif
 #ifndef PerlIO_read
-extern int	PerlIO_read		_((PerlIO *,void *,size_t));
+PERL_CALLCONV SSize_t PerlIO_read(PerlIO *, void *, Size_t);
+#endif
+#ifndef PerlIO_unread
+PERL_CALLCONV SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
 #endif
 #ifndef PerlIO_write
-extern int	PerlIO_write		_((PerlIO *,const void *,size_t));
+PERL_CALLCONV SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
 #endif
 #ifndef PerlIO_setlinebuf
-extern void	PerlIO_setlinebuf	_((PerlIO *));
+PERL_CALLCONV void PerlIO_setlinebuf(PerlIO *);
 #endif
 #ifndef PerlIO_printf
-extern int	PerlIO_printf		_((PerlIO *, const char *,...))
-					__attribute__((format (printf, 2, 3)));
-#endif
-#ifndef PerlIO_sprintf
-extern int	PerlIO_sprintf		_((char *, int, const char *,...))
-					__attribute__((format (printf, 3, 4)));
+PERL_CALLCONV int PerlIO_printf(PerlIO *, const char *, ...)
+    __attribute__format__(__printf__, 2, 3);
 #endif
 #ifndef PerlIO_vprintf
-extern int	PerlIO_vprintf		_((PerlIO *, const char *, va_list));
+PERL_CALLCONV int PerlIO_vprintf(PerlIO *, const char *, va_list);
 #endif
 #ifndef PerlIO_tell
-extern long	PerlIO_tell		_((PerlIO *));
+PERL_CALLCONV Off_t PerlIO_tell(PerlIO *);
 #endif
 #ifndef PerlIO_seek
-extern int	PerlIO_seek		_((PerlIO *,off_t,int));
+PERL_CALLCONV int PerlIO_seek(PerlIO *, Off_t, int);
 #endif
 #ifndef PerlIO_rewind
-extern void	PerlIO_rewind		_((PerlIO *));
+PERL_CALLCONV void PerlIO_rewind(PerlIO *);
 #endif
 #ifndef PerlIO_has_base
-extern int	PerlIO_has_base		_((PerlIO *));
+PERL_CALLCONV int PerlIO_has_base(PerlIO *);
 #endif
 #ifndef PerlIO_has_cntptr
-extern int	PerlIO_has_cntptr	_((PerlIO *));
+PERL_CALLCONV int PerlIO_has_cntptr(PerlIO *);
 #endif
 #ifndef PerlIO_fast_gets
-extern int	PerlIO_fast_gets	_((PerlIO *));
+PERL_CALLCONV int PerlIO_fast_gets(PerlIO *);
 #endif
 #ifndef PerlIO_canset_cnt
-extern int	PerlIO_canset_cnt	_((PerlIO *));
+PERL_CALLCONV int PerlIO_canset_cnt(PerlIO *);
 #endif
 #ifndef PerlIO_get_ptr
-extern STDCHAR * PerlIO_get_ptr		_((PerlIO *));
+PERL_CALLCONV STDCHAR *PerlIO_get_ptr(PerlIO *);
 #endif
 #ifndef PerlIO_get_cnt
-extern int	PerlIO_get_cnt		_((PerlIO *));
+PERL_CALLCONV SSize_t PerlIO_get_cnt(PerlIO *);
 #endif
 #ifndef PerlIO_set_cnt
-extern void	PerlIO_set_cnt		_((PerlIO *,int));
+PERL_CALLCONV void PerlIO_set_cnt(PerlIO *, SSize_t);
 #endif
 #ifndef PerlIO_set_ptrcnt
-extern void	PerlIO_set_ptrcnt	_((PerlIO *,STDCHAR *,int));
+PERL_CALLCONV void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, SSize_t);
 #endif
 #ifndef PerlIO_get_base
-extern STDCHAR * PerlIO_get_base	_((PerlIO *));
+PERL_CALLCONV STDCHAR *PerlIO_get_base(PerlIO *);
 #endif
 #ifndef PerlIO_get_bufsiz
-extern int	PerlIO_get_bufsiz	_((PerlIO *));
+PERL_CALLCONV SSize_t PerlIO_get_bufsiz(PerlIO *);
 #endif
 #ifndef PerlIO_tmpfile
-extern PerlIO *	PerlIO_tmpfile		_((void));
+PERL_CALLCONV PerlIO *PerlIO_tmpfile(void);
 #endif
 #ifndef PerlIO_stdin
-extern PerlIO *	PerlIO_stdin	_((void));
+PERL_CALLCONV PerlIO *PerlIO_stdin(void);
 #endif
 #ifndef PerlIO_stdout
-extern PerlIO *	PerlIO_stdout	_((void));
+PERL_CALLCONV PerlIO *PerlIO_stdout(void);
 #endif
 #ifndef PerlIO_stderr
-extern PerlIO *	PerlIO_stderr	_((void));
+PERL_CALLCONV PerlIO *PerlIO_stderr(void);
 #endif
 #ifndef PerlIO_getpos
-extern int	PerlIO_getpos		_((PerlIO *,Fpos_t *));
+PERL_CALLCONV int PerlIO_getpos(PerlIO *, SV *);
 #endif
 #ifndef PerlIO_setpos
-extern int	PerlIO_setpos		_((PerlIO *,const Fpos_t *));
+PERL_CALLCONV int PerlIO_setpos(PerlIO *, SV *);
+#endif
+#ifndef PerlIO_fdupopen
+PERL_CALLCONV PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int);
 #endif
-#endif /* Include guard */
+#if !defined(PerlIO_modestr)
+PERL_CALLCONV char *PerlIO_modestr(PerlIO *, char *buf);
+#endif
+#ifndef PerlIO_isutf8
+PERL_CALLCONV int PerlIO_isutf8(PerlIO *);
+#endif
+#ifndef PerlIO_apply_layers
+PERL_CALLCONV int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
+				      const char *names);
+#endif
+#ifndef PerlIO_binmode
+PERL_CALLCONV int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
+			  	 const char *names);
+#endif
+#ifndef PerlIO_getname
+PERL_CALLCONV char *PerlIO_getname(PerlIO *, char *);
+#endif
+
+PERL_CALLCONV void PerlIO_destruct(pTHX);
+
+PERL_CALLCONV int PerlIO_intmode2str(int rawmode, char *mode, int *writing);
+
+#ifdef PERLIO_LAYERS
+PERL_CALLCONV void PerlIO_cleanup(pTHX);
+
+PERL_CALLCONV void PerlIO_debug(const char *fmt, ...)
+    __attribute__format__(__printf__, 1, 2);
+typedef struct PerlIO_list_s PerlIO_list_t;
+
+#endif
+
+END_EXTERN_C
+#endif				/* _PERLIO_H */
+
+/*
+ * ex: set ts=8 sts=4 sw=4 et:
+ */